Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
- uhci_hcd 0000:00:1d.0: irq 233, io base 0x0000cc60
- usb usb5: configuration #1 chosen from 1 choice
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 58
- PCI: Setting latency timer of device 0000:00:1d.1 to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
- uhci_hcd 0000:00:1d.1: irq 58, io base 0x0000cc80
- usb usb6: configuration #1 chosen from 1 choice
- hub 6-0:1.0: USB hub found
- hub 6-0:1.0: 2 ports detected
- usb 3-1: new full speed USB device using uhci_hcd and address 2
- ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 233
- PCI: Setting latency timer of device 0000:00:1d.2 to 64
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
- uhci_hcd 0000:00:1d.2: irq 233, io base 0x0000cca0
- usb usb7: configuration #1 chosen from 1 choice
- hub 7-0:1.0: USB hub found
- hub 7-0:1.0: 2 ports detected
- usb 3-1: configuration #1 chosen from 1 choice
- hub 3-1:1.0: USB hub found
- hub 3-1:1.0: 4 ports detected
- md: raid1 personality registered for level 1
- SCSI subsystem initialized
- libata version 3.00 loaded.
- ata_piix 0000:00:1f.2: version 2.12
- ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 23 (level, low) -> IRQ 66
- ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- PCI: Setting latency timer of device 0000:00:1f.2 to 64
- scsi0 : ata_piix
- scsi1 : ata_piix
- ata1: SATA max UDMA/133 cmd 0xc8f0 ctl 0xc8e8 bmdma 0xcc00 irq 66
- ata2: SATA max UDMA/133 cmd 0xc8f8 ctl 0xc8ec bmdma 0xcc08 irq 66
- usb 3-1.1: new low speed USB device using uhci_hcd and address 3
- usb 3-1.1: configuration #1 chosen from 1 choice
- input: ATEN International Co. Ltd GCS1808 V3.1.307 as /class/input/input0
- input: USB HID v1.00 Keyboard [ATEN International Co. Ltd GCS1808 V3.1.307] on usb-0000:00:1a.0-1.1
- input: ATEN International Co. Ltd GCS1808 V3.1.307 as /class/input/input1
- input: USB HID v1.00 Device [ATEN International Co. Ltd GCS1808 V3.1.307] on usb-0000:00:1a.0-1.1
- input: ATEN International Co. Ltd GCS1808 V3.1.307 as /class/input/input2
- input: USB HID v1.00 Mouse [ATEN International Co. Ltd GCS1808 V3.1.307] on usb-0000:00:1a.0-1.1
- input: ATEN International Co. Ltd GCS1808 V3.1.307 as /class/input/input3
- input: USB HID v1.10 Mouse [ATEN International Co. Ltd GCS1808 V3.1.307] on usb-0000:00:1a.0-1.1
- ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata1.00: ATA-8: WDC WD1602ABKS-18N8A0, 02.03B04, max UDMA/133
- ata1.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
- ata1.01: ATAPI: PLDS DVD-ROM DH-16D5S, VD15, max UDMA/100
- ata1.00: configured for UDMA/133
- ata1.01: configured for UDMA/100
- ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
- ata2.00: ATA-8: WDC WD1602ABKS-18N8A0, 02.03B04, max UDMA/133
- ata2.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
- ata2.00: configured for UDMA/133
- Vendor: ATA Model: WDC WD1602ABKS-1 Rev: 02.0
- Type: Direct-Access ANSI SCSI revision: 05
- SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB)
- sda: Write Protect is off
- sda: Mode Sense: 00 3a 00 00
- SCSI device sda: drive cache: write back
- SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB)
- sda: Write Protect is off
- sda: Mode Sense: 00 3a 00 00
- SCSI device sda: drive cache: write back
- sda: sda1 sda2 sda3
- sd 0:0:0:0: Attached scsi disk sda
- Vendor: PLDS Model: DVD-ROM DH-16D5S Rev: VD15
- Type: CD-ROM ANSI SCSI revision: 05
- Vendor: ATA Model: WDC WD1602ABKS-1 Rev: 02.0
- Type: Direct-Access ANSI SCSI revision: 05
- SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB)
- sdb: Write Protect is off
- sdb: Mode Sense: 00 3a 00 00
- SCSI device sdb: drive cache: write back
- SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB)
- sdb: Write Protect is off
- sdb: Mode Sense: 00 3a 00 00
- SCSI device sdb: drive cache: write back
- sdb: sdb1 sdb2 sdb3
- sd 1:0:0:0: Attached scsi disk sdb
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
- device-mapper: dm-raid45: initialized v0.2594l
- md: Autodetecting RAID arrays.
- md: autorun ...
- md: considering sdb3 ...
- md: adding sdb3 ...
- md: sdb2 has different UUID to sdb3
- md: sdb1 has different UUID to sdb3
- md: adding sda3 ...
- md: sda2 has different UUID to sdb3
- md: sda1 has different UUID to sdb3
- md: created md2
- md: bind<sda3>
- md: bind<sdb3>
- md: running: <sdb3><sda3>
- raid1: raid set md2 active with 2 out of 2 mirrors
- md: considering sdb2 ...
- md: adding sdb2 ...
- md: sdb1 has different UUID to sdb2
- md: adding sda2 ...
- md: sda1 has different UUID to sdb2
- md: created md1
- md: bind<sda2>
- md: bind<sdb2>
- md: running: <sdb2><sda2>
- raid1: raid set md1 active with 2 out of 2 mirrors
- md: considering sdb1 ...
- md: adding sdb1 ...
- md: adding sda1 ...
- md: created md0
- md: bind<sda1>
- md: bind<sdb1>
- md: running: <sdb1><sda1>
- raid1: raid set md0 active with 2 out of 2 mirrors
- md: ... autorun DONE.
- md: Autodetecting RAID arrays.
- md: autorun ...
- md: ... autorun DONE.
- kjournald starting. Commit interval 5 seconds
- EXT3-fs: mounted filesystem with ordered data mode.
- SELinux: Disabled at runtime.
- SELinux: Unregistering netfilter hooks
- type=1404 audit(1316416101.748:2): selinux=0 auid=4294967295 ses=4294967295
- EDAC MC: Ver: 2.0.1 Sep 29 2010
- EDAC MC0: Giving out device to i3200_edac i3200: DEV 0000:00:00.0
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- scsi 0:0:1:0: Attached scsi generic sg1 type 5
- sd 1:0:0:0: Attached scsi generic sg2 type 0
- input: PC Speaker as /class/input/input4
- e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k3.1
- e1000e: Copyright (c) 1999-2008 Intel Corporation.
- ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
- PCI: Setting latency timer of device 0000:03:00.0 to 64
- eth0: (PCI Express:2.5GB/s:Width x1) 00:15:17:ef:b5:44
- eth0: Intel(R) PRO/1000 Network Connection
- eth0: MAC: 1, PHY: 4, PBA No: d50861-004
- sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
- Uniform CD-ROM driver Revision: 3.20
- sr 0:0:1:0: Attached scsi CD-ROM sr0
- floppy0: no floppy controllers found
- lp: driver loaded but no devices found
- ACPI: Power Button (FF) [PWRF]
- ACPI: Mapper loaded
- dell-wmi: No known WMI GUID found
- md: Autodetecting RAID arrays.
- md: autorun ...
- md: ... autorun DONE.
- device-mapper: multipath: version 1.0.5 loaded
- loop: loaded (max 8 devices)
- EXT3 FS on md2, internal journal
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on md0, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- Adding 1052152k swap on /dev/md1. Priority:-1 extents:1 across:1052152k
- IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
- NET: Registered protocol family 10
- lo: Disabled Privacy Extensions
- IPv6 over IPv4 tunneling driver
- ADDRCONF(NETDEV_UP): eth0: link is not ready
- e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
- ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- tun: Universal TUN/TAP device driver, 1.6
- tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- Bluetooth: Core ver 2.10
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: L2CAP ver 2.8
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: RFCOMM socket layer initialized
- Bluetooth: RFCOMM TTY layer initialized
- Bluetooth: RFCOMM ver 1.8
- dahdi: Telephony Interface Registered on major 196
- dahdi: Version: 2.5.0.1
- ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 50
- FALC version: 00000005
- TE110P: Setting up global serial parameters for T1 FALC V2.2
- TE110P: Successfully initialized serial bus for card
- Found a Wildcard: Digium Wildcard TE110P T1/E1
- dahdi_transcode: Loaded.
- INFO-xpp: revision Unknown MAX_XPDS=64 (8*8)
- INFO-xpp: FEATURE: without BRISTUFF support
- INFO-xpp: FEATURE: with PROTOCOL_DEBUG
- INFO-xpp: FEATURE: with sync_tick() from DAHDI
- INFO-xpp_usb: revision Unknown
- usbcore: registered new driver xpp_usb
- dahdi_echocan_mg2: Registered echo canceler 'MG2'
- TE110P: Span configured for ESF/B8ZS
- Calling startup (flags is 4099)
- wcte1xxp: Setting yellow alarm
- eth0: no IPv6 routers present
- Bluetooth: HIDP (Human Interface Emulation) ver 1.1
- wcte1xxp: Clearing yellow alarm
- ip_tables: (C) 2000-2006 Netfilter Core Team
- usbcore: deregistering driver xpp_usb
- NOTICE-xpp: toplevel_release
- dahdi_transcode: Unloaded.
- Freed a Wildcard
- dahdi: Telephony Interface Unloaded
- dahdi: Telephony Interface Registered on major 196
- dahdi: Version: 2.5.0.1
- FALC version: 00000005
- TE110P: Setting up global serial parameters for T1 FALC V2.2
- TE110P: Successfully initialized serial bus for card
- Found a Wildcard: Digium Wildcard TE110P T1/E1
- dahdi_transcode: Loaded.
- INFO-xpp: revision Unknown MAX_XPDS=64 (8*8)
- INFO-xpp: FEATURE: without BRISTUFF support
- INFO-xpp: FEATURE: with PROTOCOL_DEBUG
- INFO-xpp: FEATURE: with sync_tick() from DAHDI
- INFO-xpp_usb: revision Unknown
- usbcore: registered new driver xpp_usb
- dahdi_echocan_mg2: Registered echo canceler 'MG2'
- TE110P: Span configured for ESF/B8ZS
- Calling startup (flags is 4099)
- [root@sip dahdi]# dmesg
- Linux version 2.6.18-194.17.1.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Wed Sep 29 12:51:33 EDT 2010
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000010000 - 00000000000a0000 (usable)
- BIOS-e820: 0000000000100000 - 000000007f6a0000 (usable)
- BIOS-e820: 000000007f6a0000 - 000000007f6b6000 (reserved)
- BIOS-e820: 000000007f6b6000 - 000000007f6d5c00 (ACPI data)
- BIOS-e820: 000000007f6d5c00 - 0000000080000000 (reserved)
- BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
- 1142MB HIGHMEM available.
- 896MB LOWMEM available.
- found SMP MP-table at 000fe710
- Memory for crash kernel (0x0 to 0x0) notwithin permissible range
- disabling kdump
- Using x86 segment limits to approximate NX protection
- On node 0 totalpages: 521888
- DMA zone: 4096 pages, LIFO batch:0
- Normal zone: 225280 pages, LIFO batch:31
- HighMem zone: 292512 pages, LIFO batch:31
- DMI 2.5 present.
- Using APIC driver default
- ACPI: RSDP (v002 DELL ) @ 0x000f1f00
- ACPI: XSDT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f1f88
- ACPI: FADT (v003 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f20a0
- ACPI: MADT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2194
- ACPI: SPCR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2213
- ACPI: HPET (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2263
- ACPI: MCFG (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f229b
- ACPI: SLIC (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f22d7
- ACPI: ERST (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x7f6b8800
- ACPI: HEST (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x7f6b8a10
- ACPI: BERT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x7f6b8680
- ACPI: EINJ (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x7f6b86b0
- ACPI: TCPA (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2459
- ACPI: DSDT (v001 DELL PE_SC3 0x00000001 INTL 0x20050624) @ 0x00000000
- ACPI: PM-Timer IO Port: 0x808
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- Processor #0 7:7 APIC version 20
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- Processor #1 7:7 APIC version 20
- ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled)
- ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] disabled)
- ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Enabling APIC mode: Flat. Using 1 I/O APICs
- ACPI: HPET id: 0x8086a301 base: 0xfed00000
- Using ACPI (MADT) for SMP configuration information
- Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
- Detected 2739.701 MHz processor.
- Built 1 zonelists. Total pages: 521888
- Kernel command line: ro root=/dev/md2
- mapped APIC to ffffd000 (fee00000)
- mapped IOAPIC to ffffc000 (fec00000)
- Enabling fast FPU save and restore... done.
- Enabling unmasked SIMD FPU exception support... done.
- Initializing CPU#0
- CPU 0 irqstacks, hard=c0768000 soft=c0748000
- PID hash table entries: 4096 (order: 12, 16384 bytes)
- Console: colour VGA+ 80x25
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Memory: 2062304k/2087552k available (2179k kernel code, 23916k reserved, 907k data, 228k init, 1170048k highmem)
- Checking if this processor honours the WP bit even in supervisor mode... Ok.
- hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0, 0
- hpet0: 4 64-bit timers, 14318180 Hz
- Using HPET for base-timer
- Calibrating delay loop (skipped), value calculated using timer frequency.. 5479.40 BogoMIPS (lpj=2739701)
- Security Framework v1.0.0 initialized
- SELinux: Initializing.
- SELinux: Starting in permissive mode
- selinux_register_security: Registering secondary module capability
- Capability LSM initialized as secondary
- Mount-cache hash table entries: 512
- CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0400e39d 00000000 00000001
- CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0400e39d 00000000 00000001
- monitor/mwait feature present.
- using mwait in idle threads.
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 2048K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000940 0400e39d 00000000 00000001
- Intel machine check architecture supported.
- Intel machine check reporting enabled on CPU#0.
- Checking 'hlt' instruction... OK.
- SMP alternatives: switching to UP code
- ACPI: Core revision 20060707
- CPU0: Intel Pentium(R) Dual-Core CPU E5400 @ 2.70GHz stepping 0a
- SMP alternatives: switching to SMP code
- Booting processor 1/1 eip 11000
- CPU 1 irqstacks, hard=c0769000 soft=c0749000
- Initializing CPU#1
- Calibrating delay using timer specific routine.. 5400.14 BogoMIPS (lpj=2700073)
- CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0400e39d 00000000 00000001
- CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0400e39d 00000000 00000001
- monitor/mwait feature present.
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 2048K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 1
- CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000940 0400e39d 00000000 00000001
- Intel machine check architecture supported.
- Intel machine check reporting enabled on CPU#1.
- CPU1: Intel Pentium(R) Dual-Core CPU E5400 @ 2.70GHz stepping 0a
- Total of 2 processors activated (10879.54 BogoMIPS).
- ENABLING IO-APIC IRQs
- ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
- Using local APIC timer interrupts.
- checking TSC synchronization across 2 CPUs: passed.
- Brought up 2 CPUs
- sizeof(vma)=84 bytes
- sizeof(page)=32 bytes
- sizeof(inode)=340 bytes
- sizeof(dentry)=136 bytes
- sizeof(ext3inode)=492 bytes
- sizeof(buffer_head)=52 bytes
- sizeof(skbuff)=176 bytes
- migration_cost=29
- checking if image is initramfs... it is
- Freeing initrd memory: 2532k freed
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: Using MMCONFIG
- Setting up standard PCI resources
- ACPI: Interpreter enabled
- ACPI: Using IOAPIC for interrupt routing
- ACPI: No dock devices found.
- ACPI: PCI Root Bridge [PCI0] (0000:00)
- PCI: Transparent bridge - 0000:00:1e.0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE4._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE5._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
- ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 12 14 *15)
- ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12 *14 15)
- ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LK04] (IRQs *3 4 5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- Linux Plug and Play Support v0.97 (c) Adam Belay
- pnp: PnP ACPI init
- pnp: PnP ACPI: found 10 devices
- usbcore: registered new driver usbfs
- usbcore: registered new driver hub
- PCI: Using ACPI for IRQ routing
- PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- pnp: 00:07: ioport range 0x800-0x87f could not be reserved
- pnp: 00:07: ioport range 0x880-0x8bf has been reserved
- pnp: 00:07: ioport range 0x8c0-0x8df has been reserved
- pnp: 00:07: ioport range 0x8e0-0x8e3 has been reserved
- pnp: 00:07: ioport range 0x900-0x900 has been reserved
- pnp: 00:07: ioport range 0xc00-0xc7f has been reserved
- PCI: Bridge: 0000:00:01.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1c.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1c.4
- IO window: e000-0000
- MEM window: dfe00000-00000000
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1c.5
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1e.0
- IO window: d000-0000
- MEM window: dff00000-00000000
- PREFETCH window 0x00000000d0000000-0x00000000d7ffffff
- ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
- PCI: Setting latency timer of device 0000:00:01.0 to 64
- ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
- PCI: Setting latency timer of device 0000:00:1c.0 to 64
- ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
- PCI: Setting latency timer of device 0000:00:1c.4 to 64
- ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177
- PCI: Setting latency timer of device 0000:00:1c.5 to 64
- PCI: Setting latency timer of device 0000:00:1e.0 to 64
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP reno registered
- apm: BIOS not found.
- audit: initializing netlink socket (disabled)
- type=2000 audit(1316416077.670:1): initialized
- highmem bounce pool size: 64 pages
- Total HugeTLB memory allocated, 0
- VFS: Disk quotas dquot_6.5.1
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- SELinux: Registering netfilter hooks
- Initializing Cryptographic API
- alg: No test for crc32c (crc32c-generic)
- ksign: Installing public key data
- Loading keyring
- - Added public key CC10E67B003AB7
- - User ID: CentOS (Kernel Module GPG key)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- Boot video device is 0000:05:05.0
- PCI: Setting latency timer of device 0000:00:01.0 to 64
- PCI: Setting latency timer of device 0000:00:1c.0 to 64
- PCI: Setting latency timer of device 0000:00:1c.4 to 64
- PCI: Setting latency timer of device 0000:00:1c.5 to 64
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- Real Time Clock Driver v1.12ac
- hpet_resources: 0xfed00000 is busy
- Non-volatile memory driver v1.2
- Linux agpgart interface v0.101 (c) Dave Jones
- Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- brd: module loaded
- Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
- ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
- Probing IDE interface ide0...
- Probing IDE interface ide1...
- ide-floppy driver 0.99.newide
- usbcore: registered new driver hiddev
- usbcore: registered new driver usbhid
- drivers/usb/input/hid-core.c: v2.6:USB HID core driver
- PNP: No PS/2 controller found. Probing ports directly.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
- md: bitmap version 4.39
- TCP bic registered
- Initializing IPsec netlink socket
- NET: Registered protocol family 1
- NET: Registered protocol family 17
- Using IPI No-Shortcut mode
- ACPI: (supports S0 S4 S5)
- Initalizing network drop monitor service
- Time: tsc clocksource has been installed.
- Freeing unused kernel memory: 228k freed
- Write protecting the kernel read-only data: 410k
- ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 19 (level, low) -> IRQ 225
- PCI: Setting latency timer of device 0000:00:1a.7 to 64
- ehci_hcd 0000:00:1a.7: EHCI Host Controller
- ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:1a.7: debug port 1
- PCI: cache line size of 32 is not supported by device 0000:00:1a.7
- ehci_hcd 0000:00:1a.7: irq 225, io mem 0xdfdff800
- ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 4 ports detected
- ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 233
- PCI: Setting latency timer of device 0000:00:1d.7 to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- ehci_hcd 0000:00:1d.7: debug port 1
- PCI: cache line size of 32 is not supported by device 0000:00:1d.7
- ehci_hcd 0000:00:1d.7: irq 233, io mem 0xdfdffc00
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- usb usb2: configuration #1 chosen from 1 choice
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 6 ports detected
- ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
- USB Universal Host Controller Interface driver v3.0
- ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 17 (level, low) -> IRQ 177
- PCI: Setting latency timer of device 0000:00:1a.0 to 64
- uhci_hcd 0000:00:1a.0: UHCI Host Controller
- uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:1a.0: irq 177, io base 0x0000cc20
- usb usb3: configuration #1 chosen from 1 choice
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 18 (level, low) -> IRQ 50
- PCI: Setting latency timer of device 0000:00:1a.1 to 64
- uhci_hcd 0000:00:1a.1: UHCI Host Controller
- uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:1a.1: irq 50, io base 0x0000cc40
- usb usb4: configuration #1 chosen from 1 choice
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 233
- PCI: Setting latency timer of device 0000:00:1d.0 to 64
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
- uhci_hcd 0000:00:1d.0: irq 233, io base 0x0000cc60
- usb usb5: configuration #1 chosen from 1 choice
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 58
- PCI: Setting latency timer of device 0000:00:1d.1 to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
- uhci_hcd 0000:00:1d.1: irq 58, io base 0x0000cc80
- usb usb6: configuration #1 chosen from 1 choice
- hub 6-0:1.0: USB hub found
- hub 6-0:1.0: 2 ports detected
- usb 3-1: new full speed USB device using uhci_hcd and address 2
- ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 233
- PCI: Setting latency timer of device 0000:00:1d.2 to 64
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
- uhci_hcd 0000:00:1d.2: irq 233, io base 0x0000cca0
- usb usb7: configuration #1 chosen from 1 choice
- hub 7-0:1.0: USB hub found
- hub 7-0:1.0: 2 ports detected
- usb 3-1: configuration #1 chosen from 1 choice
- hub 3-1:1.0: USB hub found
- hub 3-1:1.0: 4 ports detected
- md: raid1 personality registered for level 1
- SCSI subsystem initialized
- libata version 3.00 loaded.
- ata_piix 0000:00:1f.2: version 2.12
- ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 23 (level, low) -> IRQ 66
- ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- PCI: Setting latency timer of device 0000:00:1f.2 to 64
- scsi0 : ata_piix
- scsi1 : ata_piix
- ata1: SATA max UDMA/133 cmd 0xc8f0 ctl 0xc8e8 bmdma 0xcc00 irq 66
- ata2: SATA max UDMA/133 cmd 0xc8f8 ctl 0xc8ec bmdma 0xcc08 irq 66
- usb 3-1.1: new low speed USB device using uhci_hcd and address 3
- usb 3-1.1: configuration #1 chosen from 1 choice
- input: ATEN International Co. Ltd GCS1808 V3.1.307 as /class/input/input0
- input: USB HID v1.00 Keyboard [ATEN International Co. Ltd GCS1808 V3.1.307] on usb-0000:00:1a.0-1.1
- input: ATEN International Co. Ltd GCS1808 V3.1.307 as /class/input/input1
- input: USB HID v1.00 Device [ATEN International Co. Ltd GCS1808 V3.1.307] on usb-0000:00:1a.0-1.1
- input: ATEN International Co. Ltd GCS1808 V3.1.307 as /class/input/input2
- input: USB HID v1.00 Mouse [ATEN International Co. Ltd GCS1808 V3.1.307] on usb-0000:00:1a.0-1.1
- input: ATEN International Co. Ltd GCS1808 V3.1.307 as /class/input/input3
- input: USB HID v1.10 Mouse [ATEN International Co. Ltd GCS1808 V3.1.307] on usb-0000:00:1a.0-1.1
- ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata1.00: ATA-8: WDC WD1602ABKS-18N8A0, 02.03B04, max UDMA/133
- ata1.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
- ata1.01: ATAPI: PLDS DVD-ROM DH-16D5S, VD15, max UDMA/100
- ata1.00: configured for UDMA/133
- ata1.01: configured for UDMA/100
- ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
- ata2.00: ATA-8: WDC WD1602ABKS-18N8A0, 02.03B04, max UDMA/133
- ata2.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
- ata2.00: configured for UDMA/133
- Vendor: ATA Model: WDC WD1602ABKS-1 Rev: 02.0
- Type: Direct-Access ANSI SCSI revision: 05
- SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB)
- sda: Write Protect is off
- sda: Mode Sense: 00 3a 00 00
- SCSI device sda: drive cache: write back
- SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB)
- sda: Write Protect is off
- sda: Mode Sense: 00 3a 00 00
- SCSI device sda: drive cache: write back
- sda: sda1 sda2 sda3
- sd 0:0:0:0: Attached scsi disk sda
- Vendor: PLDS Model: DVD-ROM DH-16D5S Rev: VD15
- Type: CD-ROM ANSI SCSI revision: 05
- Vendor: ATA Model: WDC WD1602ABKS-1 Rev: 02.0
- Type: Direct-Access ANSI SCSI revision: 05
- SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB)
- sdb: Write Protect is off
- sdb: Mode Sense: 00 3a 00 00
- SCSI device sdb: drive cache: write back
- SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB)
- sdb: Write Protect is off
- sdb: Mode Sense: 00 3a 00 00
- SCSI device sdb: drive cache: write back
- sdb: sdb1 sdb2 sdb3
- sd 1:0:0:0: Attached scsi disk sdb
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
- device-mapper: dm-raid45: initialized v0.2594l
- md: Autodetecting RAID arrays.
- md: autorun ...
- md: considering sdb3 ...
- md: adding sdb3 ...
- md: sdb2 has different UUID to sdb3
- md: sdb1 has different UUID to sdb3
- md: adding sda3 ...
- md: sda2 has different UUID to sdb3
- md: sda1 has different UUID to sdb3
- md: created md2
- md: bind<sda3>
- md: bind<sdb3>
- md: running: <sdb3><sda3>
- raid1: raid set md2 active with 2 out of 2 mirrors
- md: considering sdb2 ...
- md: adding sdb2 ...
- md: sdb1 has different UUID to sdb2
- md: adding sda2 ...
- md: sda1 has different UUID to sdb2
- md: created md1
- md: bind<sda2>
- md: bind<sdb2>
- md: running: <sdb2><sda2>
- raid1: raid set md1 active with 2 out of 2 mirrors
- md: considering sdb1 ...
- md: adding sdb1 ...
- md: adding sda1 ...
- md: created md0
- md: bind<sda1>
- md: bind<sdb1>
- md: running: <sdb1><sda1>
- raid1: raid set md0 active with 2 out of 2 mirrors
- md: ... autorun DONE.
- md: Autodetecting RAID arrays.
- md: autorun ...
- md: ... autorun DONE.
- kjournald starting. Commit interval 5 seconds
- EXT3-fs: mounted filesystem with ordered data mode.
- SELinux: Disabled at runtime.
- SELinux: Unregistering netfilter hooks
- type=1404 audit(1316416101.748:2): selinux=0 auid=4294967295 ses=4294967295
- EDAC MC: Ver: 2.0.1 Sep 29 2010
- EDAC MC0: Giving out device to i3200_edac i3200: DEV 0000:00:00.0
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- scsi 0:0:1:0: Attached scsi generic sg1 type 5
- sd 1:0:0:0: Attached scsi generic sg2 type 0
- input: PC Speaker as /class/input/input4
- e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k3.1
- e1000e: Copyright (c) 1999-2008 Intel Corporation.
- ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
- PCI: Setting latency timer of device 0000:03:00.0 to 64
- eth0: (PCI Express:2.5GB/s:Width x1) 00:15:17:ef:b5:44
- eth0: Intel(R) PRO/1000 Network Connection
- eth0: MAC: 1, PHY: 4, PBA No: d50861-004
- sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
- Uniform CD-ROM driver Revision: 3.20
- sr 0:0:1:0: Attached scsi CD-ROM sr0
- floppy0: no floppy controllers found
- lp: driver loaded but no devices found
- ACPI: Power Button (FF) [PWRF]
- ACPI: Mapper loaded
- dell-wmi: No known WMI GUID found
- md: Autodetecting RAID arrays.
- md: autorun ...
- md: ... autorun DONE.
- device-mapper: multipath: version 1.0.5 loaded
- loop: loaded (max 8 devices)
- EXT3 FS on md2, internal journal
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on md0, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- Adding 1052152k swap on /dev/md1. Priority:-1 extents:1 across:1052152k
- IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
- NET: Registered protocol family 10
- lo: Disabled Privacy Extensions
- IPv6 over IPv4 tunneling driver
- ADDRCONF(NETDEV_UP): eth0: link is not ready
- e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
- ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- tun: Universal TUN/TAP device driver, 1.6
- tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- Bluetooth: Core ver 2.10
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: L2CAP ver 2.8
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: RFCOMM socket layer initialized
- Bluetooth: RFCOMM TTY layer initialized
- Bluetooth: RFCOMM ver 1.8
- dahdi: Telephony Interface Registered on major 196
- dahdi: Version: 2.5.0.1
- ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 50
- FALC version: 00000005
- TE110P: Setting up global serial parameters for T1 FALC V2.2
- TE110P: Successfully initialized serial bus for card
- Found a Wildcard: Digium Wildcard TE110P T1/E1
- dahdi_transcode: Loaded.
- INFO-xpp: revision Unknown MAX_XPDS=64 (8*8)
- INFO-xpp: FEATURE: without BRISTUFF support
- INFO-xpp: FEATURE: with PROTOCOL_DEBUG
- INFO-xpp: FEATURE: with sync_tick() from DAHDI
- INFO-xpp_usb: revision Unknown
- usbcore: registered new driver xpp_usb
- dahdi_echocan_mg2: Registered echo canceler 'MG2'
- TE110P: Span configured for ESF/B8ZS
- Calling startup (flags is 4099)
- wcte1xxp: Setting yellow alarm
- eth0: no IPv6 routers present
- Bluetooth: HIDP (Human Interface Emulation) ver 1.1
- wcte1xxp: Clearing yellow alarm
- ip_tables: (C) 2000-2006 Netfilter Core Team
- usbcore: deregistering driver xpp_usb
- NOTICE-xpp: toplevel_release
- dahdi_transcode: Unloaded.
- Freed a Wildcard
- dahdi: Telephony Interface Unloaded
- dahdi: Telephony Interface Registered on major 196
- dahdi: Version: 2.5.0.1
- FALC version: 00000005
- TE110P: Setting up global serial parameters for T1 FALC V2.2
- TE110P: Successfully initialized serial bus for card
- Found a Wildcard: Digium Wildcard TE110P T1/E1
- dahdi_transcode: Loaded.
- INFO-xpp: revision Unknown MAX_XPDS=64 (8*8)
- INFO-xpp: FEATURE: without BRISTUFF support
- INFO-xpp: FEATURE: with PROTOCOL_DEBUG
- INFO-xpp: FEATURE: with sync_tick() from DAHDI
- INFO-xpp_usb: revision Unknown
- usbcore: registered new driver xpp_usb
- dahdi_echocan_mg2: Registered echo canceler 'MG2'
- TE110P: Span configured for ESF/B8ZS
- Calling startup (flags is 4099)
- [root@sip dahdi]#
Add Comment
Please, Sign In to add comment