API tools faq
paste
Advertisement
peetaur

example smartctl -a output bad disk

peetaur
Sep 21st, 2012
72
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.05 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.42 2011-10-20 r3458 [x86_64-linux-3.5.3-1-default] (SUSE RPM)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Barracuda 7200.11
  6. Device Model: ST31500341AS
  7. Serial Number: abcdefg
  8. LU WWN Device Id: 5 000c50 026edcf67
  9. Firmware Version: CC1H
  10. User Capacity: 1,500,301,910,016 bytes [1.50 TB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: 8
  14. ATA Standard is: ATA-8-ACS revision 4
  15. Local Time is: Fri Sep 21 12:12:04 2012 CEST
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21.  
  22. General SMART Values:
  23. Offline data collection status: (0x82) Offline data collection activity
  24. was completed without error.
  25. Auto Offline Data Collection: Enabled.
  26. Self-test execution status: ( 0) The previous self-test routine completed
  27. without error or no self-test has ever
  28. been run.
  29. Total time to complete Offline
  30. data collection: ( 625) seconds.
  31. Offline data collection
  32. capabilities: (0x7b) SMART execute Offline immediate.
  33. Auto Offline data collection on/off support.
  34. Suspend Offline collection upon new
  35. command.
  36. Offline surface scan supported.
  37. Self-test supported.
  38. Conveyance Self-test supported.
  39. Selective Self-test supported.
  40. SMART capabilities: (0x0003) Saves SMART data before entering
  41. power-saving mode.
  42. Supports SMART auto save timer.
  43. Error logging capability: (0x01) Error logging supported.
  44. General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time: ( 1) minutes.
  47. Extended self-test routine
  48. recommended polling time: ( 255) minutes.
  49. Conveyance self-test routine
  50. recommended polling time: ( 2) minutes.
  51. SCT capabilities: (0x103f) SCT Status supported.
  52. SCT Error Recovery Control supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 10
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  59. 1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 162951953
  60. 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
  61. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 18
  62. 5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 63
  63. 7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail Always - 84506571
  64. 9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 14714
  65. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  66. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 18
  67. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  68. 187 Reported_Uncorrect 0x0032 071 071 000 Old_age Always - 29
  69. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
  70. 189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 183
  71. 190 Airflow_Temperature_Cel 0x0022 073 052 045 Old_age Always - 27 (Min/Max 24/27)
  72. 194 Temperature_Celsius 0x0022 027 048 000 Old_age Always - 27 (0 18 0 0 0)
  73. 195 Hardware_ECC_Recovered 0x001a 038 021 000 Old_age Always - 162951953
  74. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  75. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  76. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  77. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 74852690047271
  78. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2409153885
  79. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1371756120
  80.  
  81. SMART Error Log Version: 1
  82. ATA Error Count: 12 (device log contains only the most recent five errors)
  83. CR = Command Register [HEX]
  84. FR = Features Register [HEX]
  85. SC = Sector Count Register [HEX]
  86. SN = Sector Number Register [HEX]
  87. CL = Cylinder Low Register [HEX]
  88. CH = Cylinder High Register [HEX]
  89. DH = Device/Head Register [HEX]
  90. DC = Device Command Register [HEX]
  91. ER = Error register [HEX]
  92. ST = Status register [HEX]
  93. Powered_Up_Time is measured from power on, and printed as
  94. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  95. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  96.  
  97. Error 12 occurred at disk power-on lifetime: 14593 hours (608 days + 1 hours)
  98. When the command that caused the error occurred, the device was active or idle.
  99.  
  100. After command completion occurred, registers were:
  101. ER ST SC SN CL CH DH
  102. -- -- -- -- -- -- --
  103. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  104.  
  105. Commands leading to the command that caused the error were:
  106. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  107. -- -- -- -- -- -- -- -- ---------------- --------------------
  108. 60 00 08 ff ff ff 4f 00 1d+18:38:37.989 READ FPDMA QUEUED
  109. 27 00 00 00 00 00 e0 00 1d+18:38:37.962 READ NATIVE MAX ADDRESS EXT
  110. ec 00 00 00 00 00 a0 00 1d+18:38:37.961 IDENTIFY DEVICE
  111. ef 03 46 00 00 00 a0 00 1d+18:38:37.947 SET FEATURES [Set transfer mode]
  112. 27 00 00 00 00 00 e0 00 1d+18:38:37.920 READ NATIVE MAX ADDRESS EXT
  113.  
  114. Error 11 occurred at disk power-on lifetime: 14593 hours (608 days + 1 hours)
  115. When the command that caused the error occurred, the device was active or idle.
  116.  
  117. After command completion occurred, registers were:
  118. ER ST SC SN CL CH DH
  119. -- -- -- -- -- -- --
  120. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  121.  
  122. Commands leading to the command that caused the error were:
  123. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  124. -- -- -- -- -- -- -- -- ---------------- --------------------
  125. 60 00 08 ff ff ff 4f 00 1d+18:38:35.091 READ FPDMA QUEUED
  126. 27 00 00 00 00 00 e0 00 1d+18:38:35.063 READ NATIVE MAX ADDRESS EXT
  127. ec 00 00 00 00 00 a0 00 1d+18:38:35.062 IDENTIFY DEVICE
  128. ef 03 46 00 00 00 a0 00 1d+18:38:35.049 SET FEATURES [Set transfer mode]
  129. 27 00 00 00 00 00 e0 00 1d+18:38:35.021 READ NATIVE MAX ADDRESS EXT
  130.  
  131. Error 10 occurred at disk power-on lifetime: 14593 hours (608 days + 1 hours)
  132. When the command that caused the error occurred, the device was active or idle.
  133.  
  134. After command completion occurred, registers were:
  135. ER ST SC SN CL CH DH
  136. -- -- -- -- -- -- --
  137. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  138.  
  139. Commands leading to the command that caused the error were:
  140. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  141. -- -- -- -- -- -- -- -- ---------------- --------------------
  142. 60 00 08 ff ff ff 4f 00 1d+18:38:32.151 READ FPDMA QUEUED
  143. 27 00 00 00 00 00 e0 00 1d+18:38:32.123 READ NATIVE MAX ADDRESS EXT
  144. ec 00 00 00 00 00 a0 00 1d+18:38:32.122 IDENTIFY DEVICE
  145. ef 03 46 00 00 00 a0 00 1d+18:38:32.109 SET FEATURES [Set transfer mode]
  146. 27 00 00 00 00 00 e0 00 1d+18:38:32.081 READ NATIVE MAX ADDRESS EXT
  147.  
  148. Error 9 occurred at disk power-on lifetime: 14593 hours (608 days + 1 hours)
  149. When the command that caused the error occurred, the device was active or idle.
  150.  
  151. After command completion occurred, registers were:
  152. ER ST SC SN CL CH DH
  153. -- -- -- -- -- -- --
  154. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  155.  
  156. Commands leading to the command that caused the error were:
  157. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  158. -- -- -- -- -- -- -- -- ---------------- --------------------
  159. 60 00 08 ff ff ff 4f 00 1d+18:38:29.254 READ FPDMA QUEUED
  160. 27 00 00 00 00 00 e0 00 1d+18:38:29.226 READ NATIVE MAX ADDRESS EXT
  161. ec 00 00 00 00 00 a0 00 1d+18:38:29.225 IDENTIFY DEVICE
  162. ef 03 46 00 00 00 a0 00 1d+18:38:29.212 SET FEATURES [Set transfer mode]
  163. 27 00 00 00 00 00 e0 00 1d+18:38:29.183 READ NATIVE MAX ADDRESS EXT
  164.  
  165. Error 8 occurred at disk power-on lifetime: 14593 hours (608 days + 1 hours)
  166. When the command that caused the error occurred, the device was active or idle.
  167.  
  168. After command completion occurred, registers were:
  169. ER ST SC SN CL CH DH
  170. -- -- -- -- -- -- --
  171. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  172.  
  173. Commands leading to the command that caused the error were:
  174. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  175. -- -- -- -- -- -- -- -- ---------------- --------------------
  176. 60 00 08 ff ff ff 4f 00 1d+18:38:26.304 READ FPDMA QUEUED
  177. 27 00 00 00 00 00 e0 00 1d+18:38:26.276 READ NATIVE MAX ADDRESS EXT
  178. ec 00 00 00 00 00 a0 00 1d+18:38:26.275 IDENTIFY DEVICE
  179. ef 03 46 00 00 00 a0 00 1d+18:38:26.262 SET FEATURES [Set transfer mode]
  180. 27 00 00 00 00 00 e0 00 1d+18:38:26.234 READ NATIVE MAX ADDRESS EXT
  181.  
  182. SMART Self-test log structure revision number 1
  183. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  184. # 1 Short offline Completed without error 00% 14714 -
  185. # 2 Short offline Completed without error 00% 14694 -
  186. # 3 Extended offline Completed without error 00% 8 -
  187.  
  188. SMART Selective self-test log data structure revision number 1
  189. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  190. 1 0 0 Not_testing
  191. 2 0 0 Not_testing
  192. 3 0 0 Not_testing
  193. 4 0 0 Not_testing
  194. 5 0 0 Not_testing
  195. Selective self-test flags (0x0):
  196. After scanning selected spans, do NOT read-scan remainder of disk.
  197. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!