API tools faq
paste
sporker

8.3-R verbose boot, cold boot, msix disabled

sporker
Aug 14th, 2012
61
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 37.04 KB | None | 0 0
raw download clone embed print report
  1.  
  2. SMAP type=01 base=0000000000000000 len=0000000000092000
  3. SMAP type=02 base=0000000000092000 len=000000000000e000
  4. SMAP type=02 base=00000000000e6000 len=000000000001a000
  5. SMAP type=01 base=0000000000100000 len=00000000dfd80000
  6. SMAP type=03 base=00000000dfe80000 len=0000000000012000
  7. SMAP type=04 base=00000000dfe92000 len=000000000003e000
  8. SMAP type=02 base=00000000dfed0000 len=0000000000010000
  9. SMAP type=02 base=00000000dfeed000 len=0000000000013000
  10. SMAP type=02 base=00000000dff00000 len=0000000000100000
  11. SMAP type=02 base=00000000e0000000 len=0000000010000000
  12. SMAP type=02 base=00000000ffc00000 len=0000000000400000
  13. SMAP type=01 base=0000000100000000 len=000000071f000000
  14. Table 'FACP' at 0xdfe80290
  15. Table 'APIC' at 0xdfe80390
  16. APIC: Found table at 0xdfe80390
  17. APIC: Using the MADT enumerator.
  18. MADT: Found CPU APIC ID 16 ACPI ID 1: enabled
  19. SMP: Added CPU 16 (AP)
  20. MADT: Found CPU APIC ID 17 ACPI ID 2: enabled
  21. SMP: Added CPU 17 (AP)
  22. MADT: Found CPU APIC ID 18 ACPI ID 3: enabled
  23. SMP: Added CPU 18 (AP)
  24. MADT: Found CPU APIC ID 19 ACPI ID 4: enabled
  25. SMP: Added CPU 19 (AP)
  26. MADT: Found CPU APIC ID 20 ACPI ID 5: enabled
  27. SMP: Added CPU 20 (AP)
  28. MADT: Found CPU APIC ID 21 ACPI ID 6: enabled
  29. SMP: Added CPU 21 (AP)
  30. MADT: Found CPU APIC ID 134 ACPI ID 7: disabled
  31. MADT: Found CPU APIC ID 135 ACPI ID 8: disabled
  32. Copyright (c) 1992-2012 The FreeBSD Project.
  33. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  34. The Regents of the University of California. All rights reserved.
  35. FreeBSD is a registered trademark of The FreeBSD Foundation.
  36. FreeBSD 8.3-RELEASE #0: Mon Apr 9 21:23:18 UTC 2012
  37. [email protected]:/usr/obj/usr/src/sys/GENERIC amd64
  38. Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff833c7000.
  39. Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff833c7230.
  40. Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff833c7898.
  41. Preloaded elf obj module "/boot/kernel/geom_uzip.ko" at 0xffffffff833c7e88.
  42. Preloaded elf obj module "/boot/kernel/zlib.ko" at 0xffffffff833c8438.
  43. Preloaded mfs_root "/boot/mfsroot" at 0xffffffff833c89a0.
  44. Preloaded elf obj module "/boot/kernel/tmpfs.ko" at 0xffffffff833c89f0.
  45. Preloaded elf obj module "/boot/kernel/ahci.ko" at 0xffffffff833c8fd8.
  46. Timecounter "i8254" frequency 1193182 Hz quality 0
  47. Calibrating TSC clock ... TSC clock: 3310789549 Hz
  48. CPU: AMD Opteron(tm) Processor 4234 (3310.79-MHz K8-class CPU)
  49. Origin = "AuthenticAMD" Id = 0x600f12 Family = 15 Model = 1 Stepping = 2
  50. Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  51. Features2=0x1698220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,AVX>
  52. AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  53. AMD Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,<b23>,<b24>>
  54. TSC: P-state invariant
  55. L1 2MB data TLB: 32 entries, fully associative
  56. L1 2MB instruction TLB: 24 entries, fully associative
  57. L1 4KB data TLB: 32 entries, fully associative
  58. L1 4KB instruction TLB: 48 entries, fully associative
  59. L1 data cache: 16 kbytes, 64 bytes/line, 1 lines/tag, 4-way associative
  60. L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
  61. L2 2MB data TLB: 1024 entries, 8-way associative
  62. L2 2MB instruction TLB: 0 entries, 8-way associative
  63. L2 4KB data TLB: 1024 entries, 8-way associative
  64. L2 4KB instruction TLB: 1024 entries, 8-way associative
  65. L2 unified cache: 2048 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
  66. real memory = 34359738368 (32768 MB)
  67. Physical memory chunk(s):
  68. 0x0000000000001000 - 0x000000000008dfff, 577536 bytes (141 pages)
  69. 0x00000000033f4000 - 0x00000000dfe7ffff, 3702046720 bytes (903820 pages)
  70. 0x0000000100000000 - 0x00000007e1f2ffff, 29560602624 bytes (7216944 pages)
  71. avail memory = 33058291712 (31526 MB)
  72. ACPI APIC Table: <121211 APIC1744>
  73. INTR: Adding local APIC 17 as a target
  74. INTR: Adding local APIC 18 as a target
  75. INTR: Adding local APIC 19 as a target
  76. INTR: Adding local APIC 20 as a target
  77. INTR: Adding local APIC 21 as a target
  78. FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
  79. FreeBSD/SMP: 1 package(s) x 6 core(s)
  80. cpu0 (BSP): APIC ID: 16
  81. cpu1 (AP): APIC ID: 17
  82. cpu2 (AP): APIC ID: 18
  83. cpu3 (AP): APIC ID: 19
  84. cpu4 (AP): APIC ID: 20
  85. cpu5 (AP): APIC ID: 21
  86. APIC: CPU 0 has ACPI ID 1
  87. APIC: CPU 1 has ACPI ID 2
  88. APIC: CPU 2 has ACPI ID 3
  89. APIC: CPU 3 has ACPI ID 4
  90. APIC: CPU 4 has ACPI ID 5
  91. APIC: CPU 5 has ACPI ID 6
  92. x86bios: IVT 0x000000-0x0004ff at 0xffffff0000000000
  93. x86bios: SSEG 0x010000-0x01ffff at 0xffffff8000082000
  94. x86bios: EBDA 0x092000-0x09ffff at 0xffffff0000092000
  95. x86bios: ROM 0x0a0000-0x0effff at 0xffffff00000a0000
  96. ULE: setup cpu 0
  97. ULE: setup cpu 1
  98. ULE: setup cpu 2
  99. ULE: setup cpu 3
  100. ULE: setup cpu 4
  101. ULE: setup cpu 5
  102. ACPI: RSDP 0xfb330 00024 (v02 ACPIAM)
  103. ACPI: XSDT 0xdfe80100 00054 (v01 121211 XSDT1744 20111212 MSFT 00000097)
  104. ACPI: FACP 0xdfe80290 000F4 (v03 121211 FACP1744 20111212 MSFT 00000097)
  105. ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20101013/tbfadt-655)
  106. ACPI: DSDT 0xdfe80470 0461E (v01 8010_ 8010_001 00000001 INTL 20051117)
  107. ACPI: FACS 0xdfe92000 00040
  108. ACPI: APIC 0xdfe80390 0009E (v01 121211 APIC1744 20111212 MSFT 00000097)
  109. ACPI: MCFG 0xdfe80430 0003C (v01 121211 OEMMCFG 20111212 MSFT 00000097)
  110. ACPI: OEMB 0xdfe92040 000CB (v01 121211 OEMB1744 20111212 MSFT 00000097)
  111. ACPI: HPET 0xdfe8a470 00038 (v01 121211 OEMHPET 20111212 MSFT 00000097)
  112. ACPI: SSDT 0xdfe8a4b0 01158 (v01 A M I POWERNOW 00000001 AMD 00000001)
  113. MADT: Found IO APIC ID 0, Interrupt 0 at 0xfec00000
  114. ioapic0: Routing external 8259A's -> intpin 0
  115. MADT: Found IO APIC ID 1, Interrupt 24 at 0xfec20000
  116. MADT: Interrupt override: source 0, irq 2
  117. ioapic0: Routing IRQ 0 -> intpin 2
  118. MADT: Interrupt override: source 9, irq 9
  119. ioapic0: intpin 9 trigger: level
  120. ioapic0: intpin 9 polarity: low
  121. lapic: Routing NMI -> LINT1
  122. lapic: LINT1 trigger: edge
  123. lapic: LINT1 polarity: high
  124. ioapic0 <Version 2.1> irqs 0-23 on motherboard
  125. ioapic1 <Version 2.1> irqs 24-55 on motherboard
  126. cpu0 BSP:
  127. ID: 0x10000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  128. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  129. timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  130. wlan: <802.11 Link Layer>
  131. nfslock: pseudo-device
  132. kbd: new array size 4
  133. kbd1 at kbdmux0
  134. mem: <memory>
  135. io: <I/O>
  136. null: <null device, zero device>
  137. random: <entropy source, Software, Yarrow>
  138. hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
  139. acpi0: <121211 XSDT1744> on motherboard
  140. PCIe: Memory Mapped configuration base @ 0xe0000000
  141. ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 16 vector 48
  142. acpi0: [MPSAFE]
  143. acpi0: [ITHREAD]
  144. ACPI: Executed 2 blocks of module-level executable AML code
  145. acpi0: Power Button (fixed)
  146. acpi0: reservation of fec00000, 1000 (3) failed
  147. acpi0: reservation of fee00000, 1000 (3) failed
  148. acpi0: reservation of ffb80000, 80000 (3) failed
  149. acpi0: reservation of fec10000, 20 (3) failed
  150. acpi0: reservation of 0, a0000 (3) failed
  151. acpi0: reservation of 100000, dff00000 (3) failed
  152. ACPI timer: 1/1 0/6996 1/1 1/1 1/2 1/2 1/1 1/1 1/1 1/1 -> 9
  153. Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
  154. acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
  155. cpu0: <ACPI CPU> on acpi0
  156. cpu1: <ACPI CPU> on acpi0
  157. cpu2: <ACPI CPU> on acpi0
  158. cpu3: <ACPI CPU> on acpi0
  159. cpu4: <ACPI CPU> on acpi0
  160. cpu5: <ACPI CPU> on acpi0
  161. pci_link0: Index IRQ Rtd Ref IRQs
  162. Initial Probe 0 11 N 0 4 7 10 11 12 14 15
  163. Validation 0 11 N 0 4 7 10 11 12 14 15
  164. After Disable 0 255 N 0 4 7 10 11 12 14 15
  165. pci_link1: Index IRQ Rtd Ref IRQs
  166. Initial Probe 0 10 N 0 4 7 10 11 12 14 15
  167. Validation 0 10 N 0 4 7 10 11 12 14 15
  168. After Disable 0 255 N 0 4 7 10 11 12 14 15
  169. pci_link2: Index IRQ Rtd Ref IRQs
  170. Initial Probe 0 14 N 0 4 7 10 11 12 14 15
  171. Validation 0 14 N 0 4 7 10 11 12 14 15
  172. After Disable 0 255 N 0 4 7 10 11 12 14 15
  173. pci_link3: Index IRQ Rtd Ref IRQs
  174. Initial Probe 0 7 N 0 4 7 10 11 12 14 15
  175. Validation 0 7 N 0 4 7 10 11 12 14 15
  176. After Disable 0 255 N 0 4 7 10 11 12 14 15
  177. pci_link4: Index IRQ Rtd Ref IRQs
  178. Initial Probe 0 255 N 0 4 7 10 11 12 14 15
  179. Validation 0 255 N 0 4 7 10 11 12 14 15
  180. After Disable 0 255 N 0 4 7 10 11 12 14 15
  181. pci_link5: Index IRQ Rtd Ref IRQs
  182. Initial Probe 0 11 N 0 4 7 10 11 12 14 15
  183. Validation 0 11 N 0 4 7 10 11 12 14 15
  184. After Disable 0 255 N 0 4 7 10 11 12 14 15
  185. pci_link6: Index IRQ Rtd Ref IRQs
  186. Initial Probe 0 10 N 0 4 7 10 11 12 14 15
  187. Validation 0 10 N 0 4 7 10 11 12 14 15
  188. After Disable 0 255 N 0 4 7 10 11 12 14 15
  189. pci_link7: Index IRQ Rtd Ref IRQs
  190. Initial Probe 0 15 N 0 4 7 10 11 12 14 15
  191. Validation 0 15 N 0 4 7 10 11 12 14 15
  192. After Disable 0 255 N 0 4 7 10 11 12 14 15
  193. acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
  194. acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route
  195. Timecounter "HPET" frequency 14318180 Hz quality 900
  196. pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
  197. pci0: <ACPI PCI bus> on pcib0
  198. pci0: domain=0, physical bus=0
  199. found-> vendor=0x1002, dev=0x5a12, revid=0x02
  200. domain=0, bus=0, slot=0, func=0
  201. class=06-00-00, hdrtype=0x00, mfdev=1
  202. cmdreg=0x0002, statreg=0x2010, cachelnsz=0 (dwords)
  203. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  204. MSI supports 4 messages
  205. found-> vendor=0x1002, dev=0x5a1c, revid=0x00
  206. domain=0, bus=0, slot=9, func=0
  207. class=06-04-00, hdrtype=0x01, mfdev=0
  208. cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
  209. lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
  210. intpin=a, irq=11
  211. powerspec 3 supports D0 D3 current D0
  212. MSI supports 1 message
  213. pcib0: matched entry for 0.9.INTA
  214. pcib0: slot 9 INTA hardwired to IRQ 53
  215. found-> vendor=0x1002, dev=0x5a1d, revid=0x00
  216. domain=0, bus=0, slot=10, func=0
  217. class=06-04-00, hdrtype=0x01, mfdev=0
  218. cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
  219. lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
  220. intpin=a, irq=10
  221. powerspec 3 supports D0 D3 current D0
  222. MSI supports 1 message
  223. pcib0: matched entry for 0.10.INTA
  224. pcib0: slot 10 INTA hardwired to IRQ 54
  225. found-> vendor=0x1002, dev=0x4391, revid=0x00
  226. domain=0, bus=0, slot=17, func=0
  227. class=01-06-01, hdrtype=0x00, mfdev=0
  228. cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
  229. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  230. intpin=a, irq=10
  231. powerspec 2 supports D0 D3 current D0
  232. map[10]: type I/O Port, range 32, base 0xb400, size 3, enabled
  233. map[14]: type I/O Port, range 32, base 0xbc00, size 2, enabled
  234. map[18]: type I/O Port, range 32, base 0xb880, size 3, enabled
  235. map[1c]: type I/O Port, range 32, base 0xb800, size 2, enabled
  236. map[20]: type I/O Port, range 32, base 0xb480, size 4, enabled
  237. map[24]: type Memory, range 32, base 0xfe9fa400, size 10, enabled
  238. pcib0: matched entry for 0.17.INTA
  239. pcib0: slot 17 INTA hardwired to IRQ 22
  240. found-> vendor=0x1002, dev=0x4397, revid=0x00
  241. domain=0, bus=0, slot=18, func=0
  242. class=0c-03-10, hdrtype=0x00, mfdev=1
  243. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  244. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  245. intpin=a, irq=11
  246. map[10]: type Memory, range 32, base 0xfe9f6000, size 12, enabled
  247. pcib0: matched entry for 0.18.INTA
  248. pcib0: slot 18 INTA hardwired to IRQ 16
  249. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9f6000
  250. ohci early: SMM active, request owner change
  251. found-> vendor=0x1002, dev=0x4398, revid=0x00
  252. domain=0, bus=0, slot=18, func=1
  253. class=0c-03-10, hdrtype=0x00, mfdev=0
  254. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  255. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  256. intpin=a, irq=11
  257. map[10]: type Memory, range 32, base 0xfe9f7000, size 12, enabled
  258. pcib0: matched entry for 0.18.INTA
  259. pcib0: slot 18 INTA hardwired to IRQ 16
  260. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9f7000
  261. ohci early: SMM active, request owner change
  262. found-> vendor=0x1002, dev=0x4396, revid=0x00
  263. domain=0, bus=0, slot=18, func=2
  264. class=0c-03-20, hdrtype=0x00, mfdev=0
  265. cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
  266. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  267. intpin=b, irq=10
  268. powerspec 2 supports D0 D1 D2 D3 current D0
  269. map[10]: type Memory, range 32, base 0xfe9fa800, size 8, enabled
  270. pcib0: matched entry for 0.18.INTB
  271. pcib0: slot 18 INTB hardwired to IRQ 17
  272. unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe9fa800
  273. found-> vendor=0x1002, dev=0x4397, revid=0x00
  274. domain=0, bus=0, slot=19, func=0
  275. class=0c-03-10, hdrtype=0x00, mfdev=1
  276. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  277. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  278. intpin=a, irq=14
  279. map[10]: type Memory, range 32, base 0xfe9f8000, size 12, enabled
  280. pcib0: matched entry for 0.19.INTA
  281. pcib0: slot 19 INTA hardwired to IRQ 18
  282. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9f8000
  283. ohci early: SMM active, request owner change
  284. found-> vendor=0x1002, dev=0x4398, revid=0x00
  285. domain=0, bus=0, slot=19, func=1
  286. class=0c-03-10, hdrtype=0x00, mfdev=0
  287. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  288. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  289. intpin=a, irq=14
  290. map[10]: type Memory, range 32, base 0xfe9f9000, size 12, enabled
  291. pcib0: matched entry for 0.19.INTA
  292. pcib0: slot 19 INTA hardwired to IRQ 18
  293. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9f9000
  294. ohci early: SMM active, request owner change
  295. found-> vendor=0x1002, dev=0x4396, revid=0x00
  296. domain=0, bus=0, slot=19, func=2
  297. class=0c-03-20, hdrtype=0x00, mfdev=0
  298. cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
  299. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  300. intpin=b, irq=7
  301. powerspec 2 supports D0 D1 D2 D3 current D0
  302. map[10]: type Memory, range 32, base 0xfe9fac00, size 8, enabled
  303. pcib0: matched entry for 0.19.INTB
  304. pcib0: slot 19 INTB hardwired to IRQ 19
  305. unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe9fac00
  306. found-> vendor=0x1002, dev=0x4385, revid=0x3d
  307. domain=0, bus=0, slot=20, func=0
  308. class=0c-05-00, hdrtype=0x00, mfdev=1
  309. cmdreg=0x0403, statreg=0x0230, cachelnsz=0 (dwords)
  310. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  311. found-> vendor=0x1002, dev=0x439d, revid=0x00
  312. domain=0, bus=0, slot=20, func=3
  313. class=06-01-00, hdrtype=0x00, mfdev=1
  314. cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
  315. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  316. found-> vendor=0x1002, dev=0x4384, revid=0x00
  317. domain=0, bus=0, slot=20, func=4
  318. class=06-04-01, hdrtype=0x01, mfdev=1
  319. cmdreg=0x0107, statreg=0x02a0, cachelnsz=0 (dwords)
  320. lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
  321. found-> vendor=0x1002, dev=0x4399, revid=0x00
  322. domain=0, bus=0, slot=20, func=5
  323. class=0c-03-10, hdrtype=0x00, mfdev=0
  324. cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
  325. lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  326. intpin=c, irq=14
  327. map[10]: type Memory, range 32, base 0xfe9fb000, size 12, enabled
  328. pcib0: matched entry for 0.20.INTC
  329. pcib0: slot 20 INTC hardwired to IRQ 18
  330. unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9fb000
  331. ohci early: SMM active, request owner change
  332. found-> vendor=0x1022, dev=0x1600, revid=0x00
  333. domain=0, bus=0, slot=24, func=0
  334. class=06-00-00, hdrtype=0x00, mfdev=1
  335. cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
  336. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  337. found-> vendor=0x1022, dev=0x1601, revid=0x00
  338. domain=0, bus=0, slot=24, func=1
  339. class=06-00-00, hdrtype=0x00, mfdev=1
  340. cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
  341. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  342. found-> vendor=0x1022, dev=0x1602, revid=0x00
  343. domain=0, bus=0, slot=24, func=2
  344. class=06-00-00, hdrtype=0x00, mfdev=1
  345. cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
  346. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  347. found-> vendor=0x1022, dev=0x1603, revid=0x00
  348. domain=0, bus=0, slot=24, func=3
  349. class=06-00-00, hdrtype=0x00, mfdev=1
  350. cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
  351. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  352. found-> vendor=0x1022, dev=0x1604, revid=0x00
  353. domain=0, bus=0, slot=24, func=4
  354. class=06-00-00, hdrtype=0x00, mfdev=1
  355. cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
  356. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  357. found-> vendor=0x1022, dev=0x1605, revid=0x00
  358. domain=0, bus=0, slot=24, func=5
  359. class=06-00-00, hdrtype=0x00, mfdev=1
  360. cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
  361. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  362. pcib1: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0
  363. pcib1: domain 0
  364. pcib1: secondary bus 3
  365. pcib1: subordinate bus 3
  366. pcib1: I/O decode 0xe000-0xefff
  367. pcib1: memory decode 0xfeb00000-0xfebfffff
  368. pcib1: no prefetched decode
  369. pci3: <ACPI PCI bus> on pcib1
  370. pci3: domain=0, physical bus=3
  371. found-> vendor=0x8086, dev=0x10d3, revid=0x00
  372. domain=0, bus=3, slot=0, func=0
  373. class=02-00-00, hdrtype=0x00, mfdev=0
  374. cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
  375. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  376. intpin=a, irq=11
  377. powerspec 2 supports D0 D3 current D0
  378. MSI supports 1 message, 64 bit
  379. MSI-X supports 5 messages in map 0x1c
  380. map[10]: type Memory, range 32, base 0xfebe0000, size 17, enabled
  381. pcib1: requested memory range 0xfebe0000-0xfebfffff: good
  382. map[18]: type I/O Port, range 32, base 0xe800, size 5, enabled
  383. pcib1: requested I/O range 0xe800-0xe81f: in range
  384. map[1c]: type Memory, range 32, base 0xfebdc000, size 14, enabled
  385. pcib1: requested memory range 0xfebdc000-0xfebdffff: good
  386. pcib1: matched entry for 3.0.INTA
  387. pcib1: slot 0 INTA hardwired to IRQ 48
  388. em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xe800-0xe81f mem 0xfebe0000-0xfebfffff,0xfebdc000-0xfebdffff irq 48 at device 0.0 on pci3
  389. em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfebe0000
  390. em0: attempting to allocate 1 MSI vectors (1 supported)
  391. msi: routing MSI IRQ 256 to local APIC 16 vector 49
  392. em0: using IRQ 256 for MSI
  393. em0: Using an MSI interrupt
  394. em0: [FILTER]
  395. em0: bpf attached
  396. em0: Ethernet address: 00:e0:81:cd:92:cd
  397. pcib2: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0
  398. pcib2: domain 0
  399. pcib2: secondary bus 2
  400. pcib2: subordinate bus 2
  401. pcib2: I/O decode 0xd000-0xdfff
  402. pcib2: memory decode 0xfea00000-0xfeafffff
  403. pcib2: no prefetched decode
  404. pci2: <ACPI PCI bus> on pcib2
  405. pci2: domain=0, physical bus=2
  406. found-> vendor=0x8086, dev=0x10d3, revid=0x00
  407. domain=0, bus=2, slot=0, func=0
  408. class=02-00-00, hdrtype=0x00, mfdev=0
  409. cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
  410. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  411. intpin=a, irq=15
  412. powerspec 2 supports D0 D3 current D0
  413. MSI supports 1 message, 64 bit
  414. MSI-X supports 5 messages in map 0x1c
  415. map[10]: type Memory, range 32, base 0xfeae0000, size 17, enabled
  416. pcib2: requested memory range 0xfeae0000-0xfeafffff: good
  417. map[18]: type I/O Port, range 32, base 0xd800, size 5, enabled
  418. pcib2: requested I/O range 0xd800-0xd81f: in range
  419. map[1c]: type Memory, range 32, base 0xfeadc000, size 14, enabled
  420. pcib2: requested memory range 0xfeadc000-0xfeadffff: good
  421. pcib2: matched entry for 2.0.INTA
  422. pcib2: slot 0 INTA hardwired to IRQ 47
  423. em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xd800-0xd81f mem 0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 47 at device 0.0 on pci2
  424. em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfeae0000
  425. em1: attempting to allocate 1 MSI vectors (1 supported)
  426. msi: routing MSI IRQ 257 to local APIC 16 vector 50
  427. em1: using IRQ 257 for MSI
  428. em1: Using an MSI interrupt
  429. em1: [FILTER]
  430. em1: bpf attached
  431. em1: Ethernet address: 00:e0:81:cd:92:cc
  432. ahci0: <ATI IXP700 AHCI SATA controller> port 0xb400-0xb407,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f mem 0xfe9fa400-0xfe9fa7ff irq 22 at device 17.0 on pci0
  433. ahci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe9fa400
  434. ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 16 vector 51
  435. ahci0: [MPSAFE]
  436. ahci0: [ITHREAD]
  437. ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported
  438. ahci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC 6ports
  439. ahci0: Caps2:
  440. ahcich0: <AHCI channel> at channel 0 on ahci0
  441. ahcich0: [MPSAFE]
  442. ahcich0: [ITHREAD]
  443. ahcich0: Caps:
  444. ahcich1: <AHCI channel> at channel 1 on ahci0
  445. ahcich1: [MPSAFE]
  446. ahcich1: [ITHREAD]
  447. ahcich1: Caps:
  448. ahcich2: <AHCI channel> at channel 2 on ahci0
  449. ahcich2: [MPSAFE]
  450. ahcich2: [ITHREAD]
  451. ahcich2: Caps:
  452. ahcich3: <AHCI channel> at channel 3 on ahci0
  453. ahcich3: [MPSAFE]
  454. ahcich3: [ITHREAD]
  455. ahcich3: Caps:
  456. ahcich4: <AHCI channel> at channel 4 on ahci0
  457. ahcich4: [MPSAFE]
  458. ahcich4: [ITHREAD]
  459. ahcich4: Caps:
  460. ahcich5: <AHCI channel> at channel 5 on ahci0
  461. ahcich5: [MPSAFE]
  462. ahcich5: [ITHREAD]
  463. ahcich5: Caps:
  464. ohci0: <OHCI (generic) USB controller> mem 0xfe9f6000-0xfe9f6fff irq 16 at device 18.0 on pci0
  465. ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 16 vector 52
  466. ohci0: [MPSAFE]
  467. ohci0: [ITHREAD]
  468. usbus0: <OHCI (generic) USB controller> on ohci0
  469. usbus0: bpf attached
  470. ohci0: usbpf: Attached
  471. ohci1: <OHCI (generic) USB controller> mem 0xfe9f7000-0xfe9f7fff irq 16 at device 18.1 on pci0
  472. ohci1: [MPSAFE]
  473. ohci1: [ITHREAD]
  474. usbus1: <OHCI (generic) USB controller> on ohci1
  475. usbus1: bpf attached
  476. ohci1: usbpf: Attached
  477. ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe9fa800-0xfe9fa8ff irq 17 at device 18.2 on pci0
  478. ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 16 vector 53
  479. ehci0: [MPSAFE]
  480. ehci0: [ITHREAD]
  481. ehci0: Dropped interrupts workaround enabled
  482. usbus2: EHCI version 1.0
  483. usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
  484. usbus2: bpf attached
  485. ehci0: usbpf: Attached
  486. ohci2: <OHCI (generic) USB controller> mem 0xfe9f8000-0xfe9f8fff irq 18 at device 19.0 on pci0
  487. ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 16 vector 54
  488. ohci2: [MPSAFE]
  489. ohci2: [ITHREAD]
  490. usbus3: <OHCI (generic) USB controller> on ohci2
  491. usbus3: bpf attached
  492. ohci2: usbpf: Attached
  493. ohci3: <OHCI (generic) USB controller> mem 0xfe9f9000-0xfe9f9fff irq 18 at device 19.1 on pci0
  494. ohci3: [MPSAFE]
  495. ohci3: [ITHREAD]
  496. usbus4: <OHCI (generic) USB controller> on ohci3
  497. usbus4: bpf attached
  498. ohci3: usbpf: Attached
  499. ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe9fac00-0xfe9facff irq 19 at device 19.2 on pci0
  500. ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 16 vector 55
  501. ehci1: [MPSAFE]
  502. ehci1: [ITHREAD]
  503. ehci1: Dropped interrupts workaround enabled
  504. usbus5: EHCI version 1.0
  505. usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
  506. usbus5: bpf attached
  507. ehci1: usbpf: Attached
  508. pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
  509. isab0: <PCI-ISA bridge> at device 20.3 on pci0
  510. isa0: <ISA bus> on isab0
  511. pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
  512. pcib3: domain 0
  513. pcib3: secondary bus 1
  514. pcib3: subordinate bus 1
  515. pcib3: I/O decode 0xc000-0xcfff
  516. pcib3: memory decode 0xfdf00000-0xfe7fffff
  517. pcib3: no prefetched decode
  518. pcib3: Subtractively decoded bridge.
  519. pci1: <ACPI PCI bus> on pcib3
  520. pci1: domain=0, physical bus=1
  521. found-> vendor=0x1a03, dev=0x2000, revid=0x10
  522. domain=0, bus=1, slot=9, func=0
  523. class=03-00-00, hdrtype=0x00, mfdev=0
  524. cmdreg=0x0003, statreg=0x0210, cachelnsz=0 (dwords)
  525. lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
  526. intpin=a, irq=15
  527. powerspec 3 supports D0 D1 D2 D3 current D0
  528. map[10]: type Memory, range 32, base 0xfe000000, size 23, enabled
  529. pcib3: requested memory range 0xfe000000-0xfe7fffff: good
  530. map[14]: type Memory, range 32, base 0xfdfe0000, size 17, enabled
  531. pcib3: requested memory range 0xfdfe0000-0xfdffffff: good
  532. map[18]: type I/O Port, range 32, base 0xc800, size 7, enabled
  533. pcib3: requested I/O range 0xc800-0xc87f: in range
  534. pcib3: matched entry for 1.9.INTA
  535. pcib3: slot 9 INTA hardwired to IRQ 23
  536. vgapci0: <VGA-compatible display> port 0xc800-0xc87f mem 0xfe000000-0xfe7fffff,0xfdfe0000-0xfdffffff irq 23 at device 9.0 on pci1
  537. ohci4: <OHCI (generic) USB controller> mem 0xfe9fb000-0xfe9fbfff irq 18 at device 20.5 on pci0
  538. ohci4: [MPSAFE]
  539. ohci4: [ITHREAD]
  540. usbus6: <OHCI (generic) USB controller> on ohci4
  541. usbus6: bpf attached
  542. ohci4: usbpf: Attached
  543. acpi_button0: <Power Button> on acpi0
  544. atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
  545. atrtc0: registered as a time-of-day clock (resolution 1000000us)
  546. acpi_hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
  547. device_attach: acpi_hpet1 attach returned 12
  548. uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
  549. ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 16 vector 56
  550. uart0: [FILTER]
  551. uart0: fast interrupt
  552. uart0: console (9600,n,8,1)
  553. uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0
  554. ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 16 vector 57
  555. uart1: [FILTER]
  556. uart1: fast interrupt
  557. acpi0: wakeup code va 0xffffff890347e000 pa 0x4000
  558. ex_isa_identify()
  559. ahc_isa_probe 0: ioport 0xc00 alloc failed
  560. ahc_isa_probe 11: ioport 0xbc00 alloc failed
  561. isa_probe_children: disabling PnP devices
  562. atrtc: atrtc0 already exists; skipping it
  563. sc: sc0 already exists; skipping it
  564. uart: uart0 already exists; skipping it
  565. uart: uart1 already exists; skipping it
  566. isa_probe_children: probing non-PnP devices
  567. orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcc800-0xcd7ff on isa0
  568. sc0: <System console> at flags 0x100 on isa0
  569. sc0: CGA <16 virtual consoles, flags=0x300>
  570. sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
  571. vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
  572. atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
  573. atkbd0: <AT Keyboard> irq 1 on atkbdc0
  574. kbd0 at atkbd0
  575. atkbd: the current kbd controller command byte 0067
  576. atkbd: unable to set the command byte.
  577. kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000
  578. ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 16 vector 58
  579. atkbd0: [GIANT-LOCKED]
  580. atkbd0: [ITHREAD]
  581. psm0: current command byte:0067
  582. psm: failed to restore the keyboard controller command byte.
  583. psm0: unable to set the command byte.
  584. fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
  585. ppc0: cannot reserve I/O port range
  586. ppc0: <Parallel port> failed to probe at irq 7 on isa0
  587. isa_probe_children: probing PnP devices
  588. acpi_throttle0: <ACPI CPU Throttling> on cpu0
  589. acpi_throttle0: P_CNT from P_BLK 0x810
  590. hwpstate0: <Cool`n'Quiet 2.0> on cpu0
  591. Device configuration finished.
  592. procfs registered
  593. ZFS filesystem version 5
  594. ZFS storage pool version 28
  595. lapic: Divisor 2, Frequency 106799663 Hz
  596. Timecounter "TSC" frequency 3310789549 Hz quality -100
  597. Timecounters tick every 1.000 msec
  598. vlan: initialized, using hash tables with chaining
  599. lo0: bpf attached
  600. hptrr: no controller detected.
  601. md0: Preloaded image </boot/mfsroot> 35856384 bytes at 0xffffffff81175c80
  602. usbus0: 12Mbps Full Speed USB v1.0
  603. usbus1: 12Mbps Full Speed USB v1.0
  604. usbus2: 480Mbps High Speed USB v2.0
  605. usbus3: 12Mbps Full Speed USB v1.0
  606. usbus4: 12Mbps Full Speed USB v1.0
  607. usbus5: 480Mbps High Speed USB v2.0
  608. usbus6: 12Mbps Full Speed USB v1.0
  609. ahcich0: AHCI reset...
  610. ahcich0: SATA connect time=100us status=00000123
  611. ahcich0: AHCI reset: device found
  612. ahcich0: AHCI reset: device ready after 0ms
  613. ugen0.1: <ATI> at usbus0
  614. uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
  615. ugen1.1: <ATI> at usbus1
  616. uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
  617. ugen2.1: <ATI> at usbus2
  618. uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
  619. ugen3.1: <ATI> at usbus3
  620. uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
  621. ugen4.1: <ATI> at usbus4
  622. uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
  623. ugen5.1: <ATI> at usbus5
  624. uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
  625. ugen6.1: <ATI> at usbus6
  626. uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
  627. (aprobe0:ahcich0:0:15:0): SIGNATURE: 0000
  628. (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000
  629. ahcich1: AHCI reset...
  630. ahcich1: SATA connect time=100us status=00000123
  631. ahcich1: AHCI reset: device found
  632. ahcich1: AHCI reset: device ready after 0ms
  633. (aprobe0:ahcich1:0:15:0): SIGNATURE: 0000
  634. (aprobe0:ahcich1:0:0:0): SIGNATURE: 0000
  635. ahcich2: AHCI reset...
  636. ahcich2: SATA connect timeout time=10000us status=00000000
  637. ahcich2: AHCI reset: device not found
  638. ahcich3: AHCI reset...
  639. ahcich3: SATA connect timeout time=10000us status=00000000
  640. ahcich3: AHCI reset: device not found
  641. ahcich4: AHCI reset...
  642. ahcich4: SATA connect time=100us status=00000123
  643. ahcich4: AHCI reset: device found
  644. ahcich4: AHCI reset: device ready after 0ms
  645. (aprobe0:ahcich4:0:15:0): SIGNATURE: 0000
  646. (aprobe0:ahcich4:0:0:0): SIGNATURE: 0000
  647. ahcich5: AHCI reset...
  648. ahcich5: SATA connect time=100us status=00000123
  649. ahcich5: AHCI reset: device found
  650. ahcich5: AHCI reset: device ready after 0ms
  651. (aprobe0:ahcich5:0:15:0): SIGNATURE: 0000
  652. (aprobe0:ahcich5:0:0:0): SIGNATURE: 0000
  653. ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
  654. ada0: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  655. ada0: Serial Number WD-WXD1E71KUUR2
  656. ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, GEOM: new disk ada0
  657. PIO 8192bytes)
  658. ada0: Command Queueing enabled
  659. ada0: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
  660. ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
  661. ada1: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  662. ada1: Serial Number WD-WX81E81AKUK3
  663. ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  664. ada1: Command Queueing enabled
  665. ada1: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
  666. ada2 at ahcich4 bus 0 scbus4 target 0 lun 0
  667. ada2: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  668. ada2: Serial Number WD-WX71E71MSF58
  669. ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  670. ada2: Command Queueing enabled
  671. GEOM: new disk ada1
  672. ada2: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
  673. ada3 at ahcich5 bus 0 scbus5 target 0 lun 0
  674. ada3: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  675. ada3: Serial Number WD-WXD1E71LVFE8
  676. ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  677. ada3: Command Queueing enabled
  678. ada3: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
  679. pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
  680. pass0: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  681. pass0: Serial Number WD-WXD1E71KUUR2
  682. pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  683. pass0: Command Queueing enabled
  684. pass1 at ahcich1 bus 0 scbus1 target 0 lun 0
  685. pass1: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  686. pass1: Serial Number WD-WX81E81AKUK3
  687. pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  688. pass1: Command Queueing enabled
  689. pass2 at ahcich4 bus 0 scbus4 target 0 lun 0
  690. pass2: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  691. pass2: Serial Number WD-WX71E71MSF58
  692. pass2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
  693. pass2: Command Queueing enabled
  694. pass3 at ahcich5 bus 0 scbus5 target 0 lun 0
  695. pass3: <WDC WD3000HLHX-01JJPV0 04.05G04> ATA-8 SATA 3.x device
  696. pass3: Serial Number WD-WXD1E71LVFE8
  697. pass3: 300.000MB/s transfers (SATA 2.x, UDMA6, GEOM: new disk ada2
  698. PIO 8192bytes)
  699. pass3: Command Queueing enabled
  700. ATA PseudoRAID loaded
  701. SMP: AP CPU #1 Launched!
  702. cpu1 AP:
  703. ID: 0x11000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  704. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  705. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  706. SMP: AP CPU #2 Launched!
  707. cpu2 AP:
  708. ID: 0x12000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  709. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  710. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  711. SMP: AP CPU #5 Launched!
  712. cpu5 AP:
  713. ID: 0x15000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  714. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  715. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  716. SMP: AP CPU #4 Launched!
  717. cpu4 AP:
  718. ID: 0x14000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  719. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  720. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  721. SMP: AP CPU #3 Launched!
  722. cpu3 AP:
  723. ID: 0x13000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  724. lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  725. timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
  726. ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 17 vector 48
  727. ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 18 vector 48
  728. ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 19 vector 48
  729. ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 20 vector 48
  730. ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 21 vector 48
  731. ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 17 vector 49
  732. ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 18 vector 49
  733. msi: Assigning MSI IRQ 256 to local APIC 19 vector 49
  734. msi: Assigning MSI IRQ 257 to local APIC 20 vector 49
  735. GEOM: new disk ada3
  736. uhub6: 2 ports with 2 removable, self powered
  737. uhub3: 3 ports with 3 removable, self powered
  738. uhub1: 3 ports with 3 removable, self powered
  739. uhub0: 3 ports with 3 removable, self powered
  740. uhub4: 3 ports with 3 removable, self powered
  741. Root mount waiting for: usbus5 usbus2
  742. Root mount waiting for: usbus5 usbus2
  743. Root mount waiting for: usbus5 usbus2
  744. uhub5: 6 ports with 6 removable, self powered
  745. uhub2: 6 ports with 6 removable, self powered
  746. Root mount waiting for: usbus2
  747. ugen0.2: <Alps Electric> at usbus0
  748. uhub7: <Alps Electric Hub in Apple USB Keyboard, class 9/0, rev 1.10/2.10, addr 2> on usbus0
  749. ugen2.2: <American Megatrends Inc.> at usbus2
  750. uhub8: <Hub Interface> on usbus2
  751. uhub7: 3 ports with 2 removable, bus powered
  752. uhub8: 3 ports with 3 removable, self powered
  753. ugen0.3: <Alps Electric> at usbus0
  754. ukbd0: <Alps Electric Apple USB Keyboard, class 0/0, rev 1.10/1.03, addr 3> on usbus0
  755. kbd2 at ukbd0
  756. kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
  757. ugen2.3: <American Megatrends Inc.> at usbus2
  758. ukbd1: <Keyboard Interface> on usbus2
  759. kbd3 at ukbd1
  760. kbd3: ukbd1, generic (0), config:0x0, flags:0x3d0000
  761. ums0: <Mouse Interface> on usbus2
  762. ums0: 3 buttons and [Z] coordinates ID=0
  763. Trying to mount root from ufs:/dev/md0
  764. start_init: trying /sbin/init
  765. Aug 14 06:29:07 init: initial setsid() failed: Operation not permitted
  766. em0: Link is up 100 Mbps Full Duplex
  767. em0: link state changed to UP
  768. em1: Link is up 1000 Mbps Full Duplex
  769. em1: link state changed to UP
  770. Interface IP-Address Broadcast
  771. Setting hostuuid: 03000200-0400-0500-0006-000700080009.
  772. Setting hostid: 0xfe4ac89c.
  773. Entropy harvesting: interrupts ethernet point_to_point kickstart.
  774. Starting file system checks:
  775. Mounting local file systems:.
  776. Setting hostname: blinstall.
  777. em0: Link is Down
  778. em0: link state changed to DOWN
  779. em1: Link is Down
  780. em1: link state changed to DOWN
  781. Starting Network: lo0 em0 em1.
  782. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
  783. options=3<RXCSUM,TXCSUM>
  784. inet6 fe80::1%lo0 prefixlen 64 scopeid 0xa
  785. inet6 ::1 prefixlen 128
  786. inet 127.0.0.1 netmask 0xff000000
  787. nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
  788. em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
  789. options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
  790. ether 00:e0:81:cd:92:cd
  791. media: Ethernet autoselect
  792. status: no carrier
  793. em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
  794. options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
  795. ether 00:e0:81:cd:92:cc
  796. media: Ethernet autoselect
  797. status: no carrier
  798. add net ::ffff:0.0.0.0: gateway ::1
  799. add net ::0.0.0.0: gateway ::1
  800. Starting devd.
  801. Starting ums0 moused.
  802. Starting dhclient.
  803. em0: no link ...em0: Link is up 100 Mbps Full Duplex
  804. got link
  805. em0: liDHCPDISCOVER on nkem0 to 255.255.2 s55.255 port 67 itanterval 4
  806. te changed to UP
  807. em1: Link is up 1000 Mbps Full Duplex
  808. em1: link state changed to UP
  809. DHCPDISCOVER on em0 to 255.255.255.255 port 67 interval 9
  810. DHCPOFFER from 10.3.3.1
  811. DHCPOFFER from 10.3.3.1
  812. DHCPOFFER already seen.
  813. DHCPREQUEST on em0 to 255.255.255.255 port 67
  814. DHCPACK from 10.3.3.1
  815. bound to 10.3.3.12 -- renewal in 300 seconds.
  816. Starting dhclient.
  817. DHCPDISCOVER on em1 to 255.255.255.255 port 67 interval 6
  818. DHCPOFFER from 10.3.2.1
  819. DHCPREQUEST on em1 to 255.255.255.255 port 67
  820. DHCPACK from 10.3.2.1
  821. bound to 10.3.2.110 -- renewal in 43200 seconds.
  822. dhclient already running? (pid=927).
  823. dhclient already running? (pid=969).
  824. Generating host.conf.
  825. Creating and/or trimming log files.
  826. Starting syslogd.
  827. ELF ldconfig path: /lib /usr/lib /usr/lib/compat
  828. 32-bit compatibility ldconfig path:
  829. Clearing /tmp (X related).
  830. Updating motd:.
  831. Configuring syscons: blanktime.
  832. Starting sshd.
  833. Starting background file system checks in 60 seconds.
  834.  
  835. Tue Aug 14 06:29:20 UTC 2012
  836.  
  837. FreeBSD/amd64 (blinstall) (ttyu0)
  838.  
  839. login:
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!