sudo smartctl -s on -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.18.0-18-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 2.5" HDD MK..46GSX
Device Model:     TOSHIBA MK1646GSX
Serial Number:    18RRT2IRT
LU WWN Device Id: 5 000039 0c1d095f9
Firmware Version: LB112D
User Capacity:    160 041 885 696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Sun May  5 20:39:18 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 245)	Self-test routine in progress...
					50% of test remaining.
Total time to complete Offline
data collection: 		(  120) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  88) minutes.
SCT capabilities: 	       (0x0039)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 128
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       1765
  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       1
  9 Power_On_Hours          0x0032   083   083   000    Old_age   Always       -       419499
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       4125
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       550
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       114
193 Load_Cycle_Count        0x0032   094   094   000    Old_age   Always       -       65548
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       34 (Min/Max 10/52)
199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       65917558
200 Multi_Zone_Error_Rate   0x0032   100   100   000    Old_age   Always       -       162920000
240 Head_Flying_Hours       0x0032   087   087   000    Old_age   Always       -       314394
241 Total_LBAs_Written      0x0032   100   100   000    Old_age   Always       -       11225218777
242 Total_LBAs_Read         0x0032   100   100   000    Old_age   Always       -       21479706481

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%         2         -
# 2  Short offline       Interrupted (host reset)      50%         2         -
# 3  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.