resetting ...
DDR 03ea844c5d typ 24/09/03-10:42:57,fwver: v1.23
In
wdqs_if: 0x1010100
LP4/4x derate en, other dram:1x trefi
ddrconfig:0
MID:0x6
LPDDR4X, 324MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
tdqss_lf: cs0 dqs0: 48ps, dqs1: -24ps, dqs2: -48ps, dqs3: -120ps,
tdqss_hf: cs0 dqs0: 48ps, dqs1: -24ps, dqs2: -48ps, dqs3: -120ps,

change to: 324MHz
PHY drv:clk:36,ca:36,DQ:29,odt:240
vrefinner:16%, vrefout:41%
dram drv:40,odt:0
clk skew:0x61

change to: 528MHz
PHY drv:clk:36,ca:36,DQ:29,odt:240
vrefinner:16%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58

change to: 780MHz
PHY drv:clk:36,ca:36,DQ:29,odt:60
vrefinner:16%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58
rx vref: 15.6%
tx vref: 42.0%

change to: 1560MHz(final freq)
PHY drv:clk:36,ca:36,DQ:29,odt:60
vrefinner:16%, vrefout:22%
dram drv:40,odt:80
vref_ca:00000071
clk skew:0x17
rx vref: 15.6%
tx vref: 23.8%
cs 0:
rdtrn RS:
DQS0:0x37, DQS1:0x36, DQS2:0x34, DQS3:0x32,
min  : 0xf 0x11 0x11  0xf  0x1  0x5  0x8  0x4 , 0xc  0x9  0x2  0x3  0xb  0x9  0xb  0x9 ,
       0xf  0xf  0xc  0xa  0x5  0x2  0x3  0x7 , 0xd  0x9  0x8  0x2  0xc 0x10  0xb  0xf ,
mid  :0x2b 0x2c 0x2c 0x2a 0x1d 0x20 0x23 0x21 ,0x26 0x23 0x1d 0x1e 0x26 0x25 0x25 0x23 ,
      0x29 0x29 0x25 0x23 0x1e 0x1c 0x1c 0x20 ,0x25 0x23 0x22 0x1c 0x27 0x29 0x26 0x28 ,
max  :0x47 0x47 0x47 0x45 0x39 0x3b 0x3e 0x3e ,0x40 0x3e 0x39 0x39 0x42 0x41 0x3f 0x3e ,
      0x43 0x43 0x3e 0x3d 0x37 0x36 0x35 0x39 ,0x3e 0x3e 0x3d 0x37 0x43 0x43 0x42 0x42 ,
range:0x38 0x36 0x36 0x36 0x38 0x36 0x36 0x3a ,0x34 0x35 0x37 0x36 0x37 0x38 0x34 0x35 ,
      0x34 0x34 0x32 0x33 0x32 0x34 0x32 0x32 ,0x31 0x35 0x35 0x35 0x37 0x33 0x37 0x33 ,
wrtrn RS:
DQS0:0x20, DQS1:0x13, DQS2:0xe, DQS3:0x0,
min  :0x73 0x74 0x77 0x70 0x65 0x68 0x6b 0x69 0x68 ,0x5d 0x5c 0x55 0x55 0x5e 0x5e 0x5f 0x5c 0x58 ,
      0x62 0x5f 0x5a 0x59 0x4f 0x4f 0x4f 0x54 0x57 ,0x52 0x4f 0x4d 0x48 0x53 0x54 0x4f 0x56 0x4b ,
mid  :0x8d 0x8f 0x91 0x8b 0x7e 0x81 0x85 0x83 0x81 ,0x79 0x78 0x6f 0x6f 0x79 0x78 0x79 0x77 0x73 ,
      0x7d 0x7b 0x75 0x73 0x6b 0x69 0x6a 0x6e 0x70 ,0x6c 0x69 0x67 0x61 0x6d 0x6e 0x69 0x6f 0x66 ,
max  :0xa8 0xaa 0xac 0xa6 0x98 0x9a 0xa0 0x9d 0x9a ,0x96 0x94 0x89 0x8a 0x95 0x92 0x93 0x92 0x8e ,
      0x99 0x98 0x90 0x8d 0x87 0x84 0x86 0x88 0x8a ,0x87 0x83 0x81 0x7a 0x87 0x88 0x83 0x89 0x81 ,
range:0x35 0x36 0x35 0x36 0x33 0x32 0x35 0x34 0x32 ,0x39 0x38 0x34 0x35 0x37 0x34 0x34 0x36 0x36 ,
      0x37 0x39 0x36 0x34 0x38 0x35 0x37 0x34 0x33 ,0x35 0x34 0x34 0x32 0x34 0x34 0x34 0x33 0x36 ,
CBT RS:
cs:0 min  :0x4f 0x4a 0x45 0x3b 0x44 0x38 0x4d ,0x50 0x48 0x42 0x3b 0x41 0x38 0x4d ,
cs:0 mid  :0x8c 0x8c 0x7f 0x7d 0x7f 0x79 0x78 ,0x8c 0x87 0x7d 0x7b 0x7c 0x79 0x78 ,
cs:0 max  :0xca 0xce 0xb9 0xbf 0xbb 0xba 0xa3 ,0xc9 0xc7 0xb8 0xbc 0xb7 0xba 0xa3 ,
cs:0 range:0x7b 0x84 0x74 0x84 0x77 0x82 0x56 ,0x79 0x7f 0x76 0x81 0x76 0x82 0x56 ,
out

U-Boot SPL latest-2023.10-12-cc60ff40-gcc60ff40 (Apr 08 2025 - 02:21:27 +0000)
Trying to boot from SPI
## Checking hash(es) for config config-1 ... OK
## Checking hash(es) for Image atf-1 ... sha256+ OK
## Checking hash(es) for Image u-boot ... sha256+ OK
## Checking hash(es) for Image fdt-1 ... sha256+ OK
## Checking hash(es) for Image atf-2 ... sha256+ OK
## Checking hash(es) for Image atf-3 ... sha256+ OK
## Checking hash(es) for Image atf-4 ... sha256+ OK
## Checking hash(es) for Image atf-5 ... sha256+ OK
## Checking hash(es) for Image atf-6 ... sha256+ OK
INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-645-g8cea6ab0b:cl, fwver: v1.44
NOTICE:  BL31: Built : 16:36:43, Sep 19 2023
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    pmu v1 is valid 220114
INFO:    l3 cache partition cfg-0
INFO:    dfs DDR fsp_param[0].freq_mhz= 1560MHz
INFO:    dfs DDR fsp_param[1].freq_mhz= 324MHz
INFO:    dfs DDR fsp_param[2].freq_mhz= 528MHz
INFO:    dfs DDR fsp_param[3].freq_mhz= 780MHz
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0xa00000
INFO:    SPSR = 0x3c9


U-Boot latest-2023.10-12-cc60ff40-gcc60ff40 (Apr 08 2025 - 02:21:27 +0000)

Model: Radxa ROCK3 Model A
DRAM:  2 GiB
PMIC:  RK8090 (on=0x40, off=0x00)
Core:  344 devices, 31 uclasses, devicetree: separate
MMC:   mmc@fe000000: 2, mmc@fe2b0000: 1, mmc@fe310000: 0
Loading Environment from nowhere... OK
In:    serial@fe660000
Out:   serial@fe660000
Err:   serial@fe660000
Model: Radxa ROCK3 Model A
Net:   eth0: ethernet@fe010000
starting USB...
Bus usb@fd000000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus usb@fd800000: USB EHCI 1.00
Bus usb@fd840000: USB OHCI 1.0
Bus usb@fd880000: USB EHCI 1.00
Bus usb@fd8c0000: USB OHCI 1.0
scanning bus usb@fd000000 for devices... 1 USB Device(s) found
scanning bus usb@fd800000 for devices... 2 USB Device(s) found
scanning bus usb@fd840000 for devices... 1 USB Device(s) found
scanning bus usb@fd880000 for devices... 1 USB Device(s) found
scanning bus usb@fd8c0000 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
pcie_dw_rockchip pcie@fe260000: PCIe-0 Link Fail
pcie_dw_rockchip pcie@fe280000: PCIe-1 Link Fail
Hit Ctrl+C key in 0 seconds to stop autoboot...
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
pcie_dw_rockchip pcie@fe260000: PCIe-0 Link Fail
pcie_dw_rockchip pcie@fe280000: PCIe-1 Link Fail
pcie_dw_rockchip pcie@fe260000: PCIe-0 Link Fail
pcie_dw_rockchip pcie@fe280000: PCIe-1 Link Fail
scanning bus for devices...
pcie_dw_rockchip pcie@fe260000: PCIe-0 Link Fail
pcie_dw_rockchip pcie@fe280000: PCIe-1 Link Fail
ethernet@fe010000 Waiting for PHY auto negotiation to complete....... done
BOOTP broadcast 1
DHCP client bound to address 192.168.1.203 (273 ms)
missing environment variable: pxeuuid
Retrieving file: pxelinux.cfg/01-9e-57-2d-ae-3f-29
*** ERROR: `serverip' not set
Retrieving file: pxelinux.cfg/C0A801CB
*** ERROR: `serverip' not set
Retrieving file: pxelinux.cfg/C0A801C
*** ERROR: `serverip' not set
Retrieving file: pxelinux.cfg/C0A801
*** ERROR: `serverip' not set
Retrieving file: pxelinux.cfg/C0A80
*** ERROR: `serverip' not set
Retrieving file: pxelinux.cfg/C0A8
*** ERROR: `serverip' not set
Retrieving file: pxelinux.cfg/C0A
*** ERROR: `serverip' not set
Retrieving file: pxelinux.cfg/C0
*** ERROR: `serverip' not set
Retrieving file: pxelinux.cfg/C
*** ERROR: `serverip' not set
Retrieving file: pxelinux.cfg/default-arm-rk3568-evb_rk3568
*** ERROR: `serverip' not set
Retrieving file: pxelinux.cfg/default-arm-rk3568
*** ERROR: `serverip' not set
Retrieving file: pxelinux.cfg/default-arm
*** ERROR: `serverip' not set
Retrieving file: pxelinux.cfg/default
*** ERROR: `serverip' not set
BOOTP broadcast 1
DHCP client bound to address 192.168.1.203 (273 ms)
*** ERROR: `serverip' not set
Cannot autoload with TFTPGET
## Error: "distro_bootcmd" not defined
Boot failed. Reset in 3 seconds...
resetting ...