API tools faq
paste
Guest User

Untitled

a guest
May 19th, 2019
258
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.88 KB | None | 0 0
raw download clone embed print report
  1. Welcome to minicom 2.7.1
  2.  
  3. OPTIONS: I18n
  4. Compiled on Aug 13 2018, 16:36:08.
  5. Port /dev/ttyUSB0, 10:56:22
  6.  
  7. Press CTRL-A Z for help on special keys
  8.  
  9. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  10. [ 0.000000] Linux version 4.19.42-v8 (@buildstream) (gcc version 8.3.0 (GCC)) #2 SMP PREEM9
  11. [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
  12. [ 0.000000] efi: Getting EFI parameters from FDT:
  13. [ 0.000000] efi: UEFI not found.
  14. [ 0.000000] cma: Reserved 8 MiB at 0x000000003ac00000
  15. [ 0.000000] random: get_random_bytes called from start_kernel+0xa0/0x464 with crng_init=0
  16. [ 0.000000] percpu: Embedded 24 pages/cpu s57368 r8192 d32744 u98304
  17. [ 0.000000] Detected VIPT I-cache on CPU0
  18. [ 0.000000] CPU features: enabling workaround for ARM erratum 843419
  19. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  20. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  21. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 238896
  22. [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=1824 g
  23. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  24. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  25. [ 0.000000] Memory: 929316K/970752K available (7548K kernel code, 878K rwdata, 2360K rodat)
  26. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  27. [ 0.000000] ftrace: allocating 26441 entries in 104 pages
  28. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  29. [ 0.000000] Tasks RCU enabled.
  30. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  31. [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
  32. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47,s
  33. [ 0.041673] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  34. [ 0.047941] Console: colour dummy device 80x25
  35. [ 0.053991] console [tty1] enabled
  36. [ 0.060045] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.)
  37. [ 0.072150] pid_max: default: 32768 minimum: 301
  38. [ 0.078209] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
  39. [ 0.084261] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  40. [ 0.097470] ASID allocator initialised with 32768 entries
  41. [ 0.105571] rcu: Hierarchical SRCU implementation.
  42. [ 0.113676] EFI services will not be available.
  43. [ 0.121782] smp: Bringing up secondary CPUs ...
  44. [ 0.135980] Detected VIPT I-cache on CPU1
  45. [ 0.142041] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  46. [ 0.156253] Detected VIPT I-cache on CPU2
  47. [ 0.162314] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  48. [ 0.176526] Detected VIPT I-cache on CPU3
  49. [ 0.182588] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  50. [ 0.188673] smp: Brought up 1 node, 4 CPUs
  51. [ 0.194734] SMP: Total of 4 processors activated.
  52. [ 0.200799] CPU features: detected: 32-bit EL0 Support
  53. [ 0.209175] CPU: All CPU(s) started at EL2
  54. [ 0.250916] alternatives: patching kernel code
  55. [ 0.258274] devtmpfs: initialized
  56. [ 0.280583] Enabled cp15_barrier support
  57. [ 0.286646] Enabled setend support
  58. [ 0.292719] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19s
  59. [ 0.298783] futex hash table entries: 1024 (order: 4, 65536 bytes)
  60. [ 0.304850] pinctrl core: initialized pinctrl subsystem
  61. [ 0.310918] DMI not present or invalid.
  62. [ 0.316990] NET: Registered protocol family 16
  63. [ 0.329135] cpuidle: using governor menu
  64. [ 0.335202] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
  65. [ 0.341260] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  66. [ 0.354439] DMA: preallocated 1024 KiB pool for atomic allocations
  67. [ 0.360505] Serial: AMBA PL011 UART driver
  68. [ 0.370638] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  69. [ 0.418339] bcm2835-dma 3f007000.dma: DMA legacy API manager at (____ptrval____), dmachans1
  70. [ 0.426416] SCSI subsystem initialized
  71. [ 0.432479] usbcore: registered new interface driver usbfs
  72. [ 0.438541] usbcore: registered new interface driver hub
  73. [ 0.444607] usbcore: registered new device driver usb
  74. [ 0.452696] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:45,t
  75. [ 0.458756] raspberrypi-firmware soc:firmware: Firmware hash is 2e98b31d18547962e564bdf88eb
  76. [ 0.467218] clocksource: Switched to clocksource arch_sys_counter
  77. [ 0.596221] VFS: Disk quotas dquot_6.6.0
  78. [ 0.602219] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  79. [ 0.608216] FS-Cache: Loaded
  80. [ 0.614216] CacheFiles: Loaded
  81. [ 0.633219] NET: Registered protocol family 2
  82. [ 0.640234] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes)
  83. [ 0.646220] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  84. [ 0.652218] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
  85. [ 0.658217] TCP: Hash tables configured (established 8192 bind 8192)
  86. [ 0.664219] UDP hash table entries: 512 (order: 2, 16384 bytes)
  87. [ 0.670219] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  88. [ 0.676217] NET: Registered protocol family 1
  89. [ 0.682225] RPC: Registered named UNIX socket transport module.
  90. [ 0.688216] RPC: Registered udp transport module.
  91. [ 0.694215] RPC: Registered tcp transport module.
  92. [ 0.700216] RPC: Registered tcp NFSv4.1 backchannel transport module.
  93. [ 0.708220] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  94. [ 0.714230] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  95. [ 0.722228] Initialise system trusted keyrings
  96. [ 0.728220] workingset: timestamp_bits=46 max_order=18 bucket_order=0
  97. [ 0.745219] FS-Cache: Netfs 'nfs' registered for caching
  98. [ 0.752217] NFS: Registering the id_resolver key type
  99. [ 0.758217] Key type id_resolver registered
  100. [ 0.764216] Key type id_legacy registered
  101. [ 0.773233] Key type asymmetric registered
  102. [ 0.779217] Asymmetric key parser 'x509' registered
  103. [ 0.785230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  104. [ 0.791217] io scheduler noop registered
  105. [ 0.797217] io scheduler deadline registered (default)
  106. [ 0.803216] io scheduler cfq registered
  107. [ 0.809217] io scheduler mq-deadline registered (default)
  108. [ 0.815216] io scheduler kyber registered
  109. [ 0.826220] BCM2708FB: allocated DMA memory 0x00000000fad10000
  110. [ 0.832217] BCM2708FB: allocated DMA channel 0
  111. [ 0.889216] Console: switching to colour frame buffer device 228x61
  112. [ 0.932218] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
  113. [ 0.940222] bcm2835-rng 3f104000.rng: hwrng registered
  114. [ 0.946220] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  115. [ 0.953219] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  116. [ 0.959218] cacheinfo: Unable to detect cache hierarchy for CPU 0
  117. [ 0.981237] brd: module loaded
  118. [ 1.003219] loop: module loaded
  119. [ 1.009217] Loading iSCSI transport class v2.0-870.
  120. [ 1.016217] libphy: Fixed MDIO Bus: probed
  121. [ 1.022218] usbcore: registered new interface driver lan78xx
  122. [ 1.028217] usbcore: registered new interface driver smsc95xx
  123. [ 1.034218] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  124. [ 1.068220] dwc_otg 3f980000.usb: base=(____ptrval____)
  125. [ 1.275218] Core Release: 2.80a
  126. [ 1.281215] Setting default values for core params
  127. [ 1.287215] Finished setting default values for core params
  128. [ 1.494215] Using Buffer DMA mode
  129. [ 1.500216] Periodic Transfer Interrupt Enhancement - disabled
  130. [ 1.506216] Multiprocessor Interrupt Enhancement - disabled
  131. [ 1.512217] OTG VER PARAM: 0, OTG VER FLAG: 0
  132. [ 1.518215] Dedicated Tx FIFOs mode
  133. [ 1.531223] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = ffffff8008259000 d4
  134. [ 1.537218] FIQ FSM acceleration enabled for :
  135. [ 1.537218] Non-periodic Split Transactions
  136. [ 1.537218] Periodic Split Transactions
  137. [ 1.537218] High-Speed Isochronous Endpoints
  138. [ 1.537218] Interrupt/Control Split Transaction hack enabled
  139. [ 1.555221] WARN::hcd_init_fiq:484: MPHI regs_base at ffffff8008045000
  140. [ 1.561218] dwc_otg 3f980000.usb: DWC OTG Controller
  141. [ 1.567219] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  142. [ 1.573219] dwc_otg 3f980000.usb: irq 9, io mem 0x00000000
  143. [ 1.585218] Init: Port Power? op_state=1
  144. [ 1.597217] Init: Power Port (0)
  145. [ 1.610221] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  146. [ 1.622220] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  147. [ 1.634217] usb usb1: Product: DWC OTG Controller
  148. [ 1.646218] usb usb1: Manufacturer: Linux 4.19.42-v8 dwc_otg_hcd
  149. [ 1.658218] usb usb1: SerialNumber: 3f980000.usb
  150. [ 1.671232] hub 1-0:1.0: USB hub found
  151. [ 1.683219] hub 1-0:1.0: 1 port detected
  152. [ 1.720218] usbcore: registered new interface driver usb-storage
  153. [ 1.734218] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  154. [ 1.747221] bcm2835-cpufreq: min=600000 max=1200000
  155. [ 1.760216] sdhci: Secure Digital Host Controller Interface driver
  156. [ 1.772216] sdhci: Copyright(c) Pierre Ossman
  157. [ 1.785218] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
  158. [ 1.798218] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
  159. [ 1.811216] sdhci-pltfm: SDHCI platform and OF driver helper
  160. [ 1.825217] ledtrig-cpu: registered to indicate activity on CPUs
  161. [ 1.838216] hidraw: raw HID events driver (C) Jiri Kosina
  162. [ 1.851219] usbcore: registered new interface driver usbhid
  163. [ 1.864215] usbhid: USB HID core driver
  164. [ 1.877216] Initializing XFRM netlink socket
  165. [ 1.889217] NET: Registered protocol family 17
  166. [ 1.902217] Indeed it is in host mode hprt0 = 00021501
  167. [ 1.909145] Key type dns_resolver registered
  168. [ 1.916232] registered taskstats version 1
  169. [ 1.928227] Loading compiled-in X.509 certificates
  170. [ 1.953219] uart-pl011 3f201000.serial: cts_event_workaround enabled
  171. [ 1.966220] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 66, base_baud = 0) is a PL02
  172. [ 1.981233] console [ttyS0] disabled
  173. [ 1.993222] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 61, base_baud = 31250000) is a 16550
  174. [ 2.096221] usb 1-1: new high-speed USB device number 2 using dwc_otg
  175. [ 2.127218] console [ttyS0] enabled
  176. [ 2.149686] Indeed it is in host mode hprt0 = 00001101
  177. [ 2.239067] random: fast init done
  178. [ 2.359431] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
  179. [ 2.366978] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  180. [ 2.380237] hub 1-1:1.0: USB hub found
  181. [ 2.390153] hub 1-1:1.0: 5 ports detected
  182. [ 2.716554] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  183. [ 2.838285] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
  184. [ 2.846831] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  185. [ 2.856988] smsc95xx v1.0.6
  186. [ 3.052226] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xxc
  187. [ 3.071164] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
  188. [ 3.084415] mmc-bcm2835 3f300000.mmc: DMA channel allocated
  189. [ 3.118223] sdhost: log_buf @ (____ptrval____) (fad07000)
  190. [ 3.149220] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  191. [ 3.179221] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  192. [ 3.199220] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  193. [ 3.217219] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  194. [ 3.251425] of_cfs_init
  195. [ 3.267231] of_cfs_init: OK
  196. [ 3.277057] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  197. [ 3.296243] VFS: Cannot open root device "mmcblk0p2" or unknown-block(0,0): error -6
  198. [ 3.317219] Please append a correct "root=" boot option; here are the available partitions:
  199. [ 3.338219] 0100 4096 ram0
  200. [ 3.344215] (driver?)
  201. [ 3.344219] mmc0: host does not support reading read-only switch, assuming write-enable
  202. [ 3.379837] mmc0: new high speed SDXC card at address e624
  203. [ 3.392544] mmcblk0: mmc0:e624 SN64G 59.5 GiB
  204. [ 3.410220] 0101 4096 ram1
  205. [ 3.411219] mmcblk0: p1 p2
  206. [ 3.422100] (driver?)
  207. [ 3.431991] 0102 4096 ram2
  208. [ 3.441315] (driver?)
  209. [ 3.451961] 0103 4096 ram3
  210. [ 3.461156] (driver?)
  211. [ 3.471700] 0104 4096 ram4
  212. [ 3.480801] (driver?)
  213. [ 3.491309] 0105 4096 ram5
  214. [ 3.500244] (driver?)
  215. [ 3.510599] 0106 4096 ram6
  216. [ 3.519374] (driver?)
  217. [ 3.529618] 0107 4096 ram7
  218. [ 3.538307] (driver?)
  219. [ 3.544218] 0108 4096 ram8
  220. [ 3.563226] (driver?)
  221. [ 3.587222] 0109 4096 ram9
  222. [ 3.593217] (driver?)
  223. [ 3.617220] 010a 4096 ram10
  224. [ 3.623217] (driver?)
  225. [ 3.647216] 010b 4096 ram11
  226. [ 3.653215] (driver?)
  227. [ 3.676220] 010c 4096 ram12
  228. [ 3.682218] (driver?)
  229. [ 3.705219] 010d 4096 ram13
  230. [ 3.711217] (driver?)
  231. [ 3.734220] 010e 4096 ram14
  232. [ 3.740217] (driver?)
  233. [ 3.749622] mmc1: new high speed SDIO card at address 0001
  234. [ 3.774218] 010f 4096 ram15
  235. [ 3.780216] (driver?)
  236. [ 3.803218] b300 62367744 mmcblk0
  237. [ 3.809217] driver: mmcblk
  238. [ 3.832277] b301 43008 mmcblk0p1 00000000-01
  239. [ 3.838216]
  240. [ 3.861218] b302 4194304 mmcblk0p2 00000000-02
  241. [ 3.867216]
  242. [ 3.925794] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  243. [ 3.980780] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.42-v8 #2
  244. [ 4.033761] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
  245. [ 4.048196] Call trace:
  246. [ 4.084810] dump_backtrace+0x0/0x170
  247. [ 4.135202] show_stack+0x24/0x30
  248. [ 4.185301] dump_stack+0x9c/0xd4
  249. [ 4.235317] panic+0x128/0x278
  250. [ 4.285019] mount_block_root+0x1bc/0x26c
  251. [ 4.296202] mount_root+0x124/0x150
  252. [ 4.346294] prepare_namespace+0x160/0x1a8
  253. [ 4.396933] kernel_init_freeable+0x358/0x378
  254. [ 4.447734] kernel_init+0x18/0x108
  255. [ 4.497541] ret_from_fork+0x10/0x1c
  256. [ 4.544197] SMP: stopping secondary CPUs
  257. [ 4.594368] Kernel Offset: 0x2be8e00000 from 0xffffff8008000000
  258. [ 4.646564] CPU features: 0x0,24802004
  259. [ 4.696530] Memory Limit: none
  260. [ 4.745772] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-b-
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!