Open On-Chip Debugger 0.11.0+dev-00664-gc540aed97 (2023-02-09-19:23)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
User : 3 2 options.c:63 configuration_output_handler(): debug_level: 3
User : 4 2 options.c:63 configuration_output_handler():
Debug: 5 2 options.c:244 add_default_dirs(): bindir=/usr/local/bin
Debug: 6 2 options.c:245 add_default_dirs(): pkgdatadir=/usr/local/share/openocd
Debug: 7 2 options.c:246 add_default_dirs(): exepath=/usr/local/bin
Debug: 8 2 options.c:247 add_default_dirs(): bin2data=../share/openocd
Debug: 9 2 configuration.c:44 add_script_search_dir(): adding /root/.config/openocd
Debug: 10 2 configuration.c:44 add_script_search_dir(): adding /root/.openocd
Debug: 11 2 configuration.c:44 add_script_search_dir(): adding /usr/local/bin/../share/openocd/site
Debug: 12 2 configuration.c:44 add_script_search_dir(): adding /usr/local/bin/../share/openocd/scripts
Debug: 13 2 command.c:166 script_debug(): command - ocd_find interface/stlink.cfg
Debug: 14 2 configuration.c:99 find_file(): found interface/stlink.cfg
Debug: 15 2 command.c:166 script_debug(): command - adapter driver hla
Debug: 16 2 command.c:166 script_debug(): command - hla_layout stlink
Debug: 17 2 hla_interface.c:241 hl_interface_handle_layout_command(): hl_interface_handle_layout_command
Debug: 18 2 command.c:166 script_debug(): command - hla_device_desc ST-LINK
Debug: 19 2 hla_interface.c:228 hl_interface_handle_device_desc_command(): hl_interface_handle_device_desc_command
Debug: 20 2 command.c:166 script_debug(): command - hla_vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374e 0x0483 0x374f 0x0483 0x3752 0x0483 0x3753 0x0483 0x3754
Debug: 21 2 command.c:166 script_debug(): command - ocd_find board/quicklogic_quickfeather.cfg
Debug: 22 3 configuration.c:99 find_file(): found board/quicklogic_quickfeather.cfg
Debug: 23 3 command.c:166 script_debug(): command - reset_config srst_only
Debug: 24 3 command.c:166 script_debug(): command - transport select hla_swd
Debug: 25 3 hla_transport.c:202 hl_swd_transport_select(): hl_swd_transport_select
Debug: 26 3 command.c:166 script_debug(): command - ocd_find target/eos_s3.cfg
Debug: 27 3 configuration.c:99 find_file(): found target/eos_s3.cfg
Debug: 28 3 command.c:166 script_debug(): command - ocd_find target/swj-dp.tcl
Debug: 29 3 configuration.c:99 find_file(): found target/swj-dp.tcl
Debug: 30 3 command.c:166 script_debug(): command - transport select
Debug: 31 3 command.c:166 script_debug(): command - transport select
Debug: 32 3 command.c:166 script_debug(): command - expr  [ string first "jtag" $_TRANSPORT ] != -1
Debug: 33 3 command.c:166 script_debug(): command - transport select
Debug: 34 3 command.c:166 script_debug(): command - expr  [ string first "jtag" $_TRANSPORT ] != -1
Debug: 35 3 command.c:166 script_debug(): command - transport select
Debug: 36 3 command.c:166 script_debug(): command - expr  [ string first "swd" $_TRANSPORT ] != -1
Debug: 37 3 command.c:166 script_debug(): command - swd newdap eos_s3 cpu -irlen 4 -irmask 0xf -expected-id 0x2ba01477
Debug: 38 3 hla_tcl.c:112 jim_hl_newtap_cmd(): Creating New Tap, Chip: eos_s3, Tap: cpu, Dotted: eos_s3.cpu, 6 params
Debug: 39 3 hla_tcl.c:123 jim_hl_newtap_cmd(): Processing option: -irlen
Debug: 40 3 hla_tcl.c:123 jim_hl_newtap_cmd(): Processing option: -irmask
Debug: 41 3 hla_tcl.c:123 jim_hl_newtap_cmd(): Processing option: -expected-id
Debug: 42 3 core.c:1468 jtag_tap_init(): Created Tap: eos_s3.cpu @ abs position 0, irlen 0, capture: 0x0 mask: 0x0
Debug: 43 3 command.c:166 script_debug(): command - dap create eos_s3.dap -chain-position eos_s3.cpu
Debug: 44 3 command.c:166 script_debug(): command - target create eos_s3.cpu cortex_m -dap eos_s3.dap
Info : 45 3 target.c:6188 target_create(): The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Debug: 46 3 hla_target.c:204 adapter_target_create(): adapter_target_create
Debug: 47 3 hla_target.c:174 adapter_init_arch_info(): adapter_init_arch_info
Debug: 48 3 command.c:300 register_command(): command 'rtt' is already registered
Debug: 49 3 command.c:300 register_command(): command 'tpiu' is already registered
Debug: 50 4 command.c:166 script_debug(): command - eos_s3.cpu configure -work-area-phys 0x20000000 -work-area-size 0x80000 -work-area-backup 0
Debug: 51 4 target.c:2204 target_free_all_working_areas_restore(): freeing all working areas
Debug: 52 4 target.c:2204 target_free_all_working_areas_restore(): freeing all working areas
Debug: 53 4 target.c:2204 target_free_all_working_areas_restore(): freeing all working areas
Debug: 54 4 command.c:166 script_debug(): command - flash bank eos_s3.flash eoss3 0x00000000 0x200000 1 32 eos_s3.cpu
Debug: 55 4 tcl.c:1316 handle_flash_bank_command(): 'eoss3' driver usage field missing
Debug: 56 4 command.c:166 script_debug(): command - adapter speed 4000
Debug: 57 4 adapter.c:180 adapter_config_khz(): handle adapter khz
Debug: 58 4 adapter.c:144 adapter_khz_to_speed(): convert khz to adapter specific speed value
Debug: 59 4 adapter.c:144 adapter_khz_to_speed(): convert khz to adapter specific speed value
Debug: 60 4 command.c:166 script_debug(): command - transport select
Debug: 61 4 command.c:166 script_debug(): command - expr  [ string first "hla" $_TRANSPORT ] != -1
Debug: 62 4 command.c:166 script_debug(): command - init
Debug: 63 4 command.c:166 script_debug(): command - target init
Debug: 64 4 command.c:166 script_debug(): command - target names
Debug: 65 4 command.c:166 script_debug(): command - eos_s3.cpu cget -event gdb-flash-erase-start
Debug: 66 4 command.c:166 script_debug(): command - eos_s3.cpu configure -event gdb-flash-erase-start reset init
Debug: 67 4 command.c:166 script_debug(): command - eos_s3.cpu cget -event gdb-flash-write-end
Debug: 68 4 command.c:166 script_debug(): command - eos_s3.cpu configure -event gdb-flash-write-end reset halt
Debug: 69 4 command.c:166 script_debug(): command - eos_s3.cpu cget -event gdb-attach
Debug: 70 4 command.c:166 script_debug(): command - eos_s3.cpu configure -event gdb-attach halt 1000
Debug: 71 4 target.c:1661 handle_target_init_command(): Initializing targets...
Debug: 72 4 hla_target.c:194 adapter_init_target(): adapter_init_target
Debug: 73 4 semihosting_common.c:130 semihosting_common_init():
Debug: 74 4 hla_interface.c:122 hl_interface_init(): hl_interface_init
Debug: 75 4 hla_layout.c:95 hl_layout_init(): hl_layout_init
Debug: 76 4 adapter.c:144 adapter_khz_to_speed(): convert khz to adapter specific speed value
Debug: 77 4 adapter.c:148 adapter_khz_to_speed(): have adapter set up
Debug: 78 4 adapter.c:144 adapter_khz_to_speed(): convert khz to adapter specific speed value
Debug: 79 4 adapter.c:148 adapter_khz_to_speed(): have adapter set up
Info : 80 4 adapter.c:108 adapter_init(): clock speed 4000 kHz
Debug: 81 4 openocd.c:143 handle_init_command(): Debug Adapter init complete
Debug: 82 4 command.c:166 script_debug(): command - transport init
Debug: 83 4 transport.c:230 handle_transport_init(): handle_transport_init
Debug: 84 4 hla_transport.c:154 hl_transport_init(): hl_transport_init
Debug: 85 4 hla_transport.c:171 hl_transport_init(): current transport hla_swd
Debug: 86 4 hla_interface.c:55 hl_interface_open(): hl_interface_open
Debug: 87 5 hla_layout.c:40 hl_layout_open(): hl_layout_open
Debug: 88 5 stlink_usb.c:3697 stlink_open(): stlink_open
Debug: 89 5 stlink_usb.c:3709 stlink_open(): transport: 4 vid: 0x0483 pid: 0x3744 serial:
Debug: 90 5 stlink_usb.c:3709 stlink_open(): transport: 4 vid: 0x0483 pid: 0x3748 serial:
Debug: 91 5 stlink_usb.c:3709 stlink_open(): transport: 4 vid: 0x0483 pid: 0x374b serial:
Debug: 92 5 stlink_usb.c:3709 stlink_open(): transport: 4 vid: 0x0483 pid: 0x374d serial:
Debug: 93 5 stlink_usb.c:3709 stlink_open(): transport: 4 vid: 0x0483 pid: 0x374e serial:
Debug: 94 5 stlink_usb.c:3709 stlink_open(): transport: 4 vid: 0x0483 pid: 0x374f serial:
Debug: 95 5 stlink_usb.c:3709 stlink_open(): transport: 4 vid: 0x0483 pid: 0x3752 serial:
Debug: 96 5 stlink_usb.c:3709 stlink_open(): transport: 4 vid: 0x0483 pid: 0x3753 serial:
Debug: 97 5 stlink_usb.c:3709 stlink_open(): transport: 4 vid: 0x0483 pid: 0x3754 serial:
Info : 98 8 stlink_usb.c:1438 stlink_usb_version(): STLINK V2J29S7 (API v2) VID:PID 0483:3748
Debug: 99 9 stlink_usb.c:1663 stlink_usb_exit_mode(): MODE: 0x01
Info : 100 10 stlink_usb.c:1474 stlink_usb_check_voltage(): Target voltage: 3.149124
Debug: 101 10 stlink_usb.c:1731 stlink_usb_init_mode(): MODE: 0x01
Debug: 102 10 stlink_usb.c:3097 stlink_dump_speed_map(): Supported clock speeds are:
Debug: 103 10 stlink_usb.c:3100 stlink_dump_speed_map(): 4000 kHz
Debug: 104 10 stlink_usb.c:3100 stlink_dump_speed_map(): 1800 kHz
Debug: 105 10 stlink_usb.c:3100 stlink_dump_speed_map(): 1200 kHz
Debug: 106 10 stlink_usb.c:3100 stlink_dump_speed_map(): 950 kHz
Debug: 107 10 stlink_usb.c:3100 stlink_dump_speed_map(): 480 kHz
Debug: 108 10 stlink_usb.c:3100 stlink_dump_speed_map(): 240 kHz
Debug: 109 10 stlink_usb.c:3100 stlink_dump_speed_map(): 125 kHz
Debug: 110 10 stlink_usb.c:3100 stlink_dump_speed_map(): 100 kHz
Debug: 111 10 stlink_usb.c:3100 stlink_dump_speed_map(): 50 kHz
Debug: 112 10 stlink_usb.c:3100 stlink_dump_speed_map(): 25 kHz
Debug: 113 10 stlink_usb.c:3100 stlink_dump_speed_map(): 15 kHz
Debug: 114 10 stlink_usb.c:3100 stlink_dump_speed_map(): 5 kHz
Debug: 115 14 stlink_usb.c:1791 stlink_usb_init_mode(): MODE: 0x02
Debug: 116 14 stlink_usb.c:4092 stlink_usb_open_ap(): AP 0 enabled
Debug: 117 16 stlink_usb.c:3785 stlink_open(): Using TAR autoincrement: 4096
Debug: 118 16 core.c:634 adapter_system_reset(): SRST line released
Debug: 119 16 hla_interface.c:80 hl_interface_init_target(): hl_interface_init_target
Debug: 120 17 stlink_usb.c:2024 stlink_usb_idcode(): IDCODE: 0x2BA01477
Debug: 121 17 command.c:166 script_debug(): command - dap init
Debug: 122 17 arm_dap.c:107 dap_init_all(): Initializing all DAPs ...
Debug: 123 17 openocd.c:160 handle_init_command(): Examining targets...
Debug: 124 17 target.c:1847 target_call_event_callbacks(): target event 19 (examine-start) for core eos_s3.cpu
Debug: 125 17 hla_target.c:605 adapter_read_memory(): adapter_read_memory 0xe000ed00 4 1
Debug: 126 18 target.c:2631 target_read_u32(): address: 0xe000ed00, value: 0x410fc241
Info : 127 18 cortex_m.c:2325 cortex_m_examine(): [eos_s3.cpu] Cortex-M4 r0p1 processor detected
Debug: 128 18 cortex_m.c:2340 cortex_m_examine(): [eos_s3.cpu] cpuid: 0x410fc241
Debug: 129 18 hla_target.c:605 adapter_read_memory(): adapter_read_memory 0xe000ef40 4 1
Debug: 130 19 target.c:2631 target_read_u32(): address: 0xe000ef40, value: 0x10110021
Debug: 131 19 hla_target.c:605 adapter_read_memory(): adapter_read_memory 0xe000ef44 4 1
Debug: 132 19 target.c:2631 target_read_u32(): address: 0xe000ef44, value: 0x11000011
Debug: 133 20 cortex_m.c:2348 cortex_m_examine(): [eos_s3.cpu] Cortex-M4 floating point feature FPv4_SP found
Debug: 134 20 hla_target.c:605 adapter_read_memory(): adapter_read_memory 0xe000edf0 4 1
Debug: 135 20 target.c:2631 target_read_u32(): address: 0xe000edf0, value: 0x01090001
Debug: 136 20 target.c:2719 target_write_u32(): address: 0xe000edfc, value: 0x01000000
Debug: 137 20 hla_target.c:620 adapter_write_memory(): adapter_write_memory 0xe000edfc 4 1
Debug: 138 21 hla_target.c:605 adapter_read_memory(): adapter_read_memory 0xe0002000 4 1
Debug: 139 22 target.c:2631 target_read_u32(): address: 0xe0002000, value: 0x00000260
Debug: 140 22 target.c:2719 target_write_u32(): address: 0xe0002008, value: 0x00000000
Debug: 141 22 hla_target.c:620 adapter_write_memory(): adapter_write_memory 0xe0002008 4 1
Debug: 142 23 target.c:2719 target_write_u32(): address: 0xe000200c, value: 0x00000000
Debug: 143 23 hla_target.c:620 adapter_write_memory(): adapter_write_memory 0xe000200c 4 1
Debug: 144 24 target.c:2719 target_write_u32(): address: 0xe0002010, value: 0x00000000
Debug: 145 24 hla_target.c:620 adapter_write_memory(): adapter_write_memory 0xe0002010 4 1
Debug: 146 24 target.c:2719 target_write_u32(): address: 0xe0002014, value: 0x00000000
Debug: 147 24 hla_target.c:620 adapter_write_memory(): adapter_write_memory 0xe0002014 4 1
Debug: 148 25 target.c:2719 target_write_u32(): address: 0xe0002018, value: 0x00000000
Debug: 149 25 hla_target.c:620 adapter_write_memory(): adapter_write_memory 0xe0002018 4 1
Debug: 150 26 target.c:2719 target_write_u32(): address: 0xe000201c, value: 0x00000000
Debug: 151 26 hla_target.c:620 adapter_write_memory(): adapter_write_memory 0xe000201c 4 1
Debug: 152 26 target.c:2719 target_write_u32(): address: 0xe0002020, value: 0x00000000
Debug: 153 26 hla_target.c:620 adapter_write_memory(): adapter_write_memory 0xe0002020 4 1
Debug: 154 27 target.c:2719 target_write_u32(): address: 0xe0002024, value: 0x00000000
Debug: 155 27 hla_target.c:620 adapter_write_memory(): adapter_write_memory 0xe0002024 4 1
Debug: 156 28 cortex_m.c:2430 cortex_m_examine(): [eos_s3.cpu] FPB fpcr 0x260, numcode 6, numlit 2
Debug: 157 28 hla_target.c:605 adapter_read_memory(): adapter_read_memory 0xe0001000 4 1
Debug: 158 28 target.c:2631 target_read_u32(): address: 0xe0001000, value: 0x40000000
Debug: 159 28 cortex_m.c:2165 cortex_m_dwt_setup(): [eos_s3.cpu] DWT_CTRL: 0x40000000
Debug: 160 28 hla_target.c:605 adapter_read_memory(): adapter_read_memory 0xe0001fbc 4 1
Debug: 161 29 target.c:2631 target_read_u32(): address: 0xe0001fbc, value: 0x00000000
Debug: 162 29 cortex_m.c:2172 cortex_m_dwt_setup(): [eos_s3.cpu] DWT_DEVARCH: 0x0
Debug: 163 29 target.c:2719 target_write_u32(): address: 0xe0001028, value: 0x00000000
Debug: 164 29 hla_target.c:620 adapter_write_memory(): adapter_write_memory 0xe0001028 4 1
Debug: 165 30 target.c:2719 target_write_u32(): address: 0xe0001038, value: 0x00000000
Debug: 166 30 hla_target.c:620 adapter_write_memory(): adapter_write_memory 0xe0001038 4 1
Debug: 167 30 target.c:2719 target_write_u32(): address: 0xe0001048, value: 0x00000000
Debug: 168 30 hla_target.c:620 adapter_write_memory(): adapter_write_memory 0xe0001048 4 1
Debug: 169 31 target.c:2719 target_write_u32(): address: 0xe0001058, value: 0x00000000
Debug: 170 31 hla_target.c:620 adapter_write_memory(): adapter_write_memory 0xe0001058 4 1
Debug: 171 32 cortex_m.c:2219 cortex_m_dwt_setup(): [eos_s3.cpu] DWT dwtcr 0x40000000, comp 4, watch/trigger
Info : 172 32 cortex_m.c:2440 cortex_m_examine(): [eos_s3.cpu] target has 6 breakpoints, 4 watchpoints
Debug: 173 32 target.c:1847 target_call_event_callbacks(): target event 21 (examine-end) for core eos_s3.cpu
Debug: 174 32 command.c:166 script_debug(): command - flash init
Debug: 175 32 tcl.c:1386 handle_flash_init_command(): Initializing flash devices...
Debug: 176 32 command.c:166 script_debug(): command - nand init
Debug: 177 33 tcl.c:498 handle_nand_init_command(): Initializing NAND devices...
Debug: 178 33 command.c:166 script_debug(): command - pld init
Debug: 179 33 pld.c:205 handle_pld_init_command(): Initializing PLDs...
Debug: 180 33 command.c:166 script_debug(): command - tpiu init
Info : 181 34 gdb_server.c:3774 gdb_target_start(): starting gdb server for eos_s3.cpu on 3333
Info : 182 34 server.c:308 add_service(): Listening on port 3333 for gdb connections
Debug: 183 34 command.c:166 script_debug(): command - reset init
Debug: 184 34 target.c:1866 target_call_reset_callbacks(): target reset 3 (init)
Debug: 185 34 command.c:166 script_debug(): command - expr [catch {ocd_process_reset_inner $MODE} result] == 0
Debug: 186 34 command.c:166 script_debug(): command - target names
Debug: 187 34 command.c:166 script_debug(): command - eos_s3.cpu invoke-event reset-start
Debug: 188 34 command.c:166 script_debug(): command - transport select
Debug: 189 34 command.c:166 script_debug(): command - expr  [ string first "jtag" $_TRANSPORT ] != -1
Debug: 190 34 command.c:166 script_debug(): command - transport select
Debug: 191 34 command.c:166 script_debug(): command - expr  [ string first "jtag" $_TRANSPORT ] != -1
Debug: 192 34 command.c:166 script_debug(): command - eos_s3.cpu invoke-event examine-start
Debug: 193 34 command.c:166 script_debug(): command - eos_s3.cpu arp_examine allow-defer
Debug: 194 34 command.c:166 script_debug(): command - eos_s3.cpu invoke-event examine-end
Debug: 195 34 command.c:166 script_debug(): command - eos_s3.cpu invoke-event reset-assert-pre
Debug: 196 34 command.c:166 script_debug(): command - transport select
Debug: 197 34 command.c:166 script_debug(): command - expr  [ string first "jtag" $_TRANSPORT ] != -1
Debug: 198 34 command.c:166 script_debug(): command - eos_s3.cpu arp_reset assert 1
Debug: 199 34 target.c:2204 target_free_all_working_areas_restore(): freeing all working areas
Debug: 200 34 hla_target.c:347 hl_assert_reset(): hl_assert_reset
Debug: 201 35 core.c:630 adapter_system_reset(): SRST line asserted
Debug: 202 37 command.c:166 script_debug(): command - eos_s3.cpu invoke-event reset-assert-post
Debug: 203 37 command.c:166 script_debug(): command - eos_s3.cpu invoke-event reset-deassert-pre
Debug: 204 37 command.c:166 script_debug(): command - transport select
Debug: 205 37 command.c:166 script_debug(): command - expr  [ string first "jtag" $_TRANSPORT ] != -1
Debug: 206 37 command.c:166 script_debug(): command - eos_s3.cpu arp_reset deassert 1
Debug: 207 37 target.c:2204 target_free_all_working_areas_restore(): freeing all working areas
Debug: 208 37 hla_target.c:406 hl_deassert_reset(): hl_deassert_reset
Debug: 209 37 core.c:634 adapter_system_reset(): SRST line released
Debug: 210 37 command.c:166 script_debug(): command - eos_s3.cpu invoke-event reset-deassert-post
Debug: 211 37 command.c:166 script_debug(): command - transport select
Debug: 212 37 command.c:166 script_debug(): command - expr  [ string first "jtag" $_TRANSPORT ] != -1
Debug: 213 37 command.c:166 script_debug(): command - eos_s3.cpu was_examined
Debug: 214 37 command.c:166 script_debug(): command - eos_s3.cpu arp_waitstate halted 1000
Debug: 215 38 target.c:3289 target_wait_state(): waiting for target halted...
Error: 216 1039 target.c:3297 target_wait_state(): timed out while waiting for target halted
Debug: 217 1039 command.c:166 script_debug(): command - eos_s3.cpu curstate
Debug: 218 1039 command.c:555 run_command(): Command 'reset' failed with error code -4
Debug: 219 1039 command.c:166 script_debug(): command - echo ** Unable to reset target **
User : 220 1039 command.c:696 handle_echo(): ** Unable to reset target **
Debug: 221 1039 command.c:166 script_debug(): command - shutdown error
User : 222 1040 server.c:761 handle_shutdown_command(): shutdown command invoked
Debug: 223 1040 command.c:555 run_command(): Command 'shutdown' failed with error code -4
User : 224 1040 command.c:619 command_run_line():
Debug: 225 1040 target.c:2204 target_free_all_working_areas_restore(): freeing all working areas
Debug: 226 1040 hla_interface.c:130 hl_interface_quit(): hl_interface_quit
Debug: 227 1040 stlink_usb.c:1663 stlink_usb_exit_mode(): MODE: 0x02