API tools faq
paste
jkhsjdhjs

Odroid C2 Boot

jkhsjdhjs
Oct 18th, 2016
90
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 34.74 KB | None | 0 0
raw download clone embed print report
  1. GXBB:GXBB:GXBB:GXBB:GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:800;NAND:81;SD:0;READ:0;CHK:0;
  2. TE: 182008
  3. no sdio debug board detected
  4.  
  5. BL2 Built : 11:44:26, Nov 25 2015.
  6. gxb gfb13a3b-c2 - jcao@wonton
  7.  
  8. Board ID = 8
  9. set vcck to 1100 mv
  10. set vddee to 1050 mv
  11. CPU clk: 1536MHz
  12. DDR channel setting: DDR0 Rank0+1 same
  13. DDR0: 2048MB(auto) @ 912MHz(2T)-13
  14. DataBus test pass!
  15. AddrBus test pass!
  16. Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x000000b0
  17. Load bl30 from SD, src: 0x00010200, des: 0x01000000, size: 0x00009ef0
  18. Sending bl30........................................OK.
  19. Run bl30...
  20. Load bl301 from SD, src: 0x0001c200, des: 0x01000000, size: 0x000012c0
  21. Wait bl30...Done
  22. Sending bl301.....OK.
  23. Run bl301...
  24. d bl31 from SD, src: 0x00020200, des: 0x10100000, size: 0x00011130
  25.  
  26.  
  27. --- UART initialized after reboot ---
  28. [Reset cause: unknown]
  29. [Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14 tao.zeng@droid04]
  30. bl30: check_permit, count is 1
  31. bl30: check_permit: ok!
  32. chipid: ef bLoad bl33 from SD, src: 0x00034200, des: 0x01000000, size: 0x00069230
  33. e ad de d f0 ad ba ef be ad de not ES chip
  34. [0.296725 Inits done]
  35. secure task start!
  36. high task start!
  37. low task start!
  38. NOTICE: BL3-1: v1.0(debug):4d2e34d
  39. NOTICE: BL3-1: Built : 17:08:35, Oct 29 2015
  40. INFO: BL3-1: Initializing runtime services
  41. INFO: BL3-1: Preparing for EL3 exit to normal world
  42. INFO: BL3-1: Next image address = 0x1000000
  43. INFO: BL3-1: Next image spsr = 0x3c9
  44.  
  45.  
  46. U-Boot 2015.01-12 (Sep 12 2016 - 18:38:01) Arch Linux ARM
  47.  
  48. DRAM: 2 GiB
  49. Relocation Offset is: 76f3d000
  50. -------------------------------------------------
  51. * Welcome to Hardkernel's ODROID-C2
  52. -------------------------------------------------
  53. CPU : AMLogic S905
  54. S/N : HKC11122F37E48DE
  55. MAC : 00:1e:06:10:6c:5e
  56. BID : HKC1311604
  57. -------------------------------------------------
  58. register usb cfg[1][0] = 0000000077f974f0
  59. register usb cfg[0][1] = 0000000077f97510
  60. vpu detect type: 5
  61. vpu clk_level = 7
  62. set vpu clk: 666667000Hz, readback: 666660000Hz(0x300)
  63. MMC: aml_priv->desc_buf = 0x0000000073f35d30
  64. aml_priv->desc_buf = 0x0000000073f37ec0
  65. SDIO Port B: 0, SDIO Port C: 1
  66. ret = 1 .[mmc_init] mmc init success
  67. In: serial
  68. Out: serial
  69. Err: serial
  70. ----------------------------------
  71. MMC Size : 32 GB
  72. ----------------------------------
  73. ** Unrecognized filesystem type **
  74. ** Unrecognized filesystem type **
  75. movi: the partiton 'logo' is reading...
  76.  
  77. MMC read: dev # 0, block # 58976, count 4096 ... 4096 blocks read: OK
  78. hpd_state=1
  79. [CANVAS]addr=0x3f800000 width=3840, height=1440
  80.  
  81. set hdmitx VIC = 16
  82. hdmitx phy setting done
  83. set hdmitx VIC = 16
  84. hdmitx phy setting done
  85. Error: Bad gzipped data
  86. There is no valid bmp file at the given address
  87. Net: Meson_Ethernet
  88. Hit [Enter] key twice to stop autoboot: 0
  89. 5404 bytes read in 15 ms (351.6 KiB/s)
  90. cfgload: applying boot.ini...
  91. cfgload: setenv m "720p60hz" # 60Hz
  92. cfgload: setenv m_bpp "32"
  93. cfgload: setenv hpd "false"
  94. cfgload: setenv condev "console=ttyS0,115200n8 console=tty0" # on both
  95. cfgload: setenv mesontimer "1"
  96. cfgload: setenv nographics "1"
  97. cfgload: setenv monitor_onoff "false" # true or false
  98. cfgload: setenv maxcpus "4"
  99. cfgload: setenv max_freq "1536" # 1.536GHz
  100. cfgload: if test "${m}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi
  101. cfgload: setenv bootargs "root=/dev/mmcblk0p1 rootwait rw ${condev} no_console_suspend hdmimode=${m} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd}"
  102. cfgload: setenv loadaddr "0x11000000"
  103. cfgload: setenv dtb_loadaddr "0x1000000"
  104. cfgload: setenv initrd_loadaddr "0x13000000"
  105. cfgload: load mmc 0:1 ${loadaddr} /boot/Image
  106. 13248952 bytes read in 616 ms (20.5 MiB/s)
  107. cfgload: load mmc 0:1 ${dtb_loadaddr} /boot/dtbs/meson64_odroidc2.dtb
  108. 29164 bytes read in 16 ms (1.7 MiB/s)
  109. cfgload: fdt addr ${dtb_loadaddr}
  110. cfgload: if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
  111. cfgload: if test "${mesontimer}" = "1"; then fdt rm /timer; fi
  112. cfgload: if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
  113. cfgload: if test "${nographics}" = "1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm /picdec; fdt rm /ppmgr; fi
  114. cfgload: if test "${nographics}" = "1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi
  115. libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
  116. cfgload: if test "${nographics}" = "1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi
  117. cfgload: load mmc 0:1 ${initrd_loadaddr} /boot/initramfs-linux.img
  118. 3817460 bytes read in 190 ms (19.2 MiB/s)
  119. cfgload: booti ${loadaddr} ${initrd_loadaddr}:${filesize} ${dtb_loadaddr}
  120. load dtb from 0x1000000 ......
  121. ## Flattened Device Tree blob at 01000000
  122. Booting using the fdt blob at 0x1000000
  123. Loading Ramdisk to 73b8f000, end 73f32ff4 ... OK
  124. Loading Device Tree to 000000001fff5000, end 000000001ffff1eb ... OK
  125.  
  126. Starting kernel ...
  127.  
  128. uboot time: 4417808 us
  129. [ 0.000000] Initializing cgroup subsys cpuset
  130. [ 0.000000] Initializing cgroup subsys cpu
  131. [ 0.000000] Initializing cgroup subsys cpuacct
  132. [ 0.000000] Linux version 3.14.79-3-ARCH (builduser@leming) (gcc version 6.2.1 20160830 (GCC) ) #1 SMP PREEMPT Thu Sep 22 18:44:33 MDT 2016
  133. [ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
  134. [ 0.000000] cma: Reserved 8 MiB at 7f800000
  135. [ 0.000000] psci: probing function IDs from device-tree
  136. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ffffffc07f79e000 s16000 r8192 d20864 u45056
  137. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511048
  138. [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rootwait rw console=ttyS0,115200n8 console=tty0 no_console_suspend hdmimode=720p60hz m_bpp=32 vout= fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=false
  139. [ 0.000000] logo: get hdmimode: 720p60hz
  140. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  141. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  142. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  143. [ 0.000000] Memory: 2009352K/2080768K available (8794K kernel code, 650K rwdata, 2908K rodata, 579K init, 4095K bss, 71416K reserved)
  144. [ 0.000000] Virtual kernel memory layout:
  145. [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
  146. [ 0.000000] vmemmap : 0xffffff8040010000 - 0xffffff8042410000 ( 36 MB)
  147. [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  148. [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
  149. [ 0.000000] .init : 0xffffffc001bef000 - 0xffffffc001c7fe80 ( 580 kB)
  150. [ 0.000000] .text : 0xffffffc001080000 - 0xffffffc001bee844 ( 11707 kB)
  151. [ 0.000000] .data : 0xffffffc001c80000 - 0xffffffc001d229a0 ( 651 kB)
  152. [ 0.000000] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
  153. [ 0.000000] Preemptible hierarchical RCU implementation.
  154. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  155. [ 0.000006] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
  156. [ 0.000024] mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff800000a994
  157. [ 0.000065] local timer MESON TIMER-G mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff800000c998
  158. [ 0.000084] local timer MESON TIMER-H mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff800000e99c
  159. [ 0.000102] local timer MESON TIMER-I mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff80000109a0
  160. [ 0.000112] Switching to timer-based delay loop
  161. [ 0.000312] Console: colour dummy device 80x25
  162. [ 0.000563] console [tty0] enabled
  163. [ 0.002920] allocated 8388608 bytes of page_cgroup
  164. [ 0.002928] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  165. [ 0.002945] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
  166. [ 0.002962] pid_max: default: 32768 minimum: 301
  167. [ 0.003036] Security Framework initialized
  168. [ 0.003052] AppArmor: AppArmor disabled by boot time parameter
  169. [ 0.003088] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  170. [ 0.003099] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  171. [ 0.003501] Initializing cgroup subsys debug
  172. [ 0.003513] Initializing cgroup subsys memory
  173. [ 0.003530] Initializing cgroup subsys devices
  174. [ 0.003539] Initializing cgroup subsys freezer
  175. [ 0.003550] Initializing cgroup subsys net_cls
  176. [ 0.003558] Initializing cgroup subsys blkio
  177. [ 0.003567] Initializing cgroup subsys perf_event
  178. [ 0.003578] Initializing cgroup subsys hugetlb
  179. [ 0.003755] /cpus/cpu@0: Missing clock-frequency property
  180. [ 0.003768] /cpus/cpu@1: Missing clock-frequency property
  181. [ 0.003779] /cpus/cpu@2: Missing clock-frequency property
  182. [ 0.003790] /cpus/cpu@3: Missing clock-frequency property
  183. [ 0.003802] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
  184. [ 0.040161] Meson chip version = RevB (1F:B - 0:0)
  185. [ 0.060769] CPU1: Booted secondary processor
  186. [ 0.080748] CPU2: Booted secondary processor
  187. [ 0.100747] CPU3: Booted secondary processor
  188. [ 0.100800] Brought up 4 CPUs
  189. [ 0.100825] SMP: Total of 4 processors activated.
  190. [ 0.101268] devtmpfs: initialized
  191. [ 0.105663] xor: measuring software checksum speed
  192. [ 0.200058] 8regs : 2946.000 MB/sec
  193. [ 0.300052] 8regs_prefetch: 2626.400 MB/sec
  194. [ 0.400046] 32regs : 3490.000 MB/sec
  195. [ 0.500045] 32regs_prefetch: 3044.000 MB/sec
  196. [ 0.500053] xor: using function: 32regs (3490.000 MB/sec)
  197. [ 0.500065] pinctrl core: initialized pinctrl subsystem
  198. [ 0.500248] regulator-dummy: no parameters
  199. [ 0.501793] device-tree: Duplicate name in efusekey, renamed to "key0#1"
  200. [ 0.501819] device-tree: Duplicate name in efusekey, renamed to "key1#1"
  201. [ 0.501843] device-tree: Duplicate name in efusekey, renamed to "key2#1"
  202. [ 0.501868] device-tree: Duplicate name in efusekey, renamed to "key3#1"
  203. [ 0.503188] NET: Registered protocol family 16
  204. [ 0.503804] register canvas platform driver
  205. [ 0.503813] codec:ignore bus ops for cpu=25
  206. [ 0.503820] codec:ignore bus ops for cpu=29
  207. [ 0.503828] codec:register amports ops for bus[0]
  208. [ 0.503835] codec:register amports ops for bus[4]
  209. [ 0.503842] codec:register amports ops for bus[3]
  210. [ 0.503849] codec:register amports ops for bus[2]
  211. [ 0.503856] codec:register amports ops for bus[1]
  212. [ 0.503863] codec:register amports ops for bus[13]
  213. [ 0.503870] codec:register amports ops for bus[2]
  214. [ 0.503877] codec:register amports ops for bus[14]
  215. [ 0.503901] register rdma platform driver
  216. [ 0.504213] vdso: 2 pages (1 code, 1 data) at base ffffffc001c86000
  217. [ 0.504245] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  218. [ 0.504719] DMA: preallocated 256 KiB pool for atomic allocations
  219. [ 0.505920] software IO TLB [mem 0x7b800000-0x7bc00000] (4MB) mapped at [ffffffc07b800000-ffffffc07bbfffff]
  220. [ 0.505933] Serial: AMBA PL011 UART driver
  221. [ 0.506013] hdmitx: system: amhdmitx_init
  222. [ 0.506020] hdmitx: system: Ver: 2014May6
  223. [ 0.506048] tv_vout: tv_init_module
  224. [ 0.506059] tv_vout: major number 254 for disp
  225. [ 0.506066] vout_notify: vout_register_server
  226. [ 0.506074] tv_vout: register tv module server ok
  227. [ 0.506097] codec_mm:codec_mm_module_init
  228. [ 0.506212] gxbb clk HIU base is 0xffffff800005a000
  229. [ 0.506221] gxbb clk ao base is 0xffffff800005c000
  230. [ 0.506257] register mpll_clk_out0 success done
  231. [ 0.506267] register mpll_clk_out1 success done
  232. [ 0.506280] register mpll_clk_out2 success done
  233. [ 0.506439] register sys pll success done
  234. [ 0.506479] clkrate [ xtal ] : 24000000Hz
  235. [ 0.506487] clkrate [ 32Khz ] : 32000Hz
  236. [ 0.506495] clkrate [ clk81 ] : 166666666Hz
  237. [ 0.506503] clkrate [ fixed_pll ] : 2000000000Hz
  238. [ 0.506511] clkrate [ fclk_div2 ] : 1000000000Hz
  239. [ 0.506519] clkrate [ fclk_div3 ] : 666666000Hz
  240. [ 0.506527] clkrate [ fclk_div4 ] : 500000000Hz
  241. [ 0.506535] clkrate [ fclk_div5 ] : 400000000Hz
  242. [ 0.506542] clkrate [ fclk_div7 ] : 285714000Hz
  243. [ 0.506568] gxbb clock initialization complete
  244. [ 0.506676] msr_clk_reg0=ffffff800005e75c,msr_clk_reg2=ffffff800006a764
  245. [ 0.507455] amlogic iomap probe done
  246. [ 0.507685] Init pinux probe!
  247. [ 0.508361] pinmux-gxbb c1109880.pinmux: Probed amlogic pinctrl driver
  248. [ 0.508599] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xb0)
  249. [ 0.508619] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xb0)
  250. [ 0.508677] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xb0)
  251. [ 0.508695] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xb0)
  252. [ 0.508867] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 0
  253. [ 0.509139] codec:codec map io source 0x00000000c1100000,size=1048576 to 0xffffff8000680000
  254. [ 0.509157] codec:codec map io source 0x00000000c8820000,size=65536 to 0xffffff80000a0000
  255. [ 0.509173] codec:codec map io source 0x00000000c883c000,size=8192 to 0xffffff8000094000
  256. [ 0.509201] codec:codec map io source 0x00000000c8100000,size=1048576 to 0xffffff8000800000
  257. [ 0.509220] codec:codec map io source 0x00000000d0100000,size=262144 to 0xffffff8000980000
  258. [ 0.509236] codec:codec map io source 0x00000000c8838000,size=1024 to 0xffffff8000092000
  259. [ 0.509612] VPU driver version: v01
  260. [ 0.509621] vpu driver detect cpu type: gxbaby
  261. [ 0.509635] load vpu_clk in dts: 666667000Hz(7)
  262. [ 0.509658] vpu_probe OK
  263. [ 0.509922] canvas_probe reg=00000000c8838000,size=400
  264. [ 0.509934] canvas maped reg_base =ffffff800009c000
  265. [ 0.512859] rdma_probe
  266. [ 0.540170] bio: create slab <bio-0> at 0
  267. [ 0.710129] raid6: int64x1 535 MB/s
  268. [ 0.880093] raid6: int64x2 845 MB/s
  269. [ 1.050059] raid6: int64x4 1268 MB/s
  270. [ 1.220076] raid6: int64x8 1414 MB/s
  271. [ 1.390064] raid6: neonx1 934 MB/s
  272. [ 1.560046] raid6: neonx2 1497 MB/s
  273. [ 1.730059] raid6: neonx4 1934 MB/s
  274. [ 1.900060] raid6: neonx8 2032 MB/s
  275. [ 1.900068] raid6: using algorithm neonx8 (2032 MB/s)
  276. [ 1.900076] raid6: using intx1 recovery algorithm
  277. [ 1.900316] SCSI subsystem initialized
  278. [ 1.900453] usbcore: registered new interface driver usbfs
  279. [ 1.900490] usbcore: registered new interface driver hub
  280. [ 1.900548] usbcore: registered new device driver usb
  281. [ 1.900724] media: Linux media interface: v0.10
  282. [ 1.900754] Linux video capture interface: v2.00
  283. [ 1.900798] pps_core: LinuxPPS API ver. 1 registered
  284. [ 1.900806] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  285. [ 1.900828] PTP clock support registered
  286. [ 1.900978] logo: logo_init
  287. [ 1.901027] Advanced Linux Sound Architecture Driver Initialized.
  288. [ 1.901294] Bluetooth: Core ver 2.18
  289. [ 1.901320] NET: Registered protocol family 31
  290. [ 1.901328] Bluetooth: HCI device and connection manager initialized
  291. [ 1.901341] Bluetooth: HCI socket layer initialized
  292. [ 1.901352] Bluetooth: L2CAP socket layer initialized
  293. [ 1.901372] Bluetooth: SCO socket layer initialized
  294. [ 1.901386] NetLabel: Initializing
  295. [ 1.901393] NetLabel: domain hash size = 128
  296. [ 1.901400] NetLabel: protocols = UNLABELED CIPSOv4
  297. [ 1.901434] NetLabel: unlabeled traffic allowed by default
  298. [ 1.901921] Switched to clocksource Timer-E
  299. [ 1.905414] NET: Registered protocol family 2
  300. [ 1.905812] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  301. [ 1.905908] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  302. [ 1.906122] TCP: Hash tables configured (established 16384 bind 16384)
  303. [ 1.906186] TCP: reno registered
  304. [ 1.906199] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  305. [ 1.906239] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  306. [ 1.906401] NET: Registered protocol family 1
  307. [ 1.906583] RPC: Registered named UNIX socket transport module.
  308. [ 1.906592] RPC: Registered udp transport module.
  309. [ 1.906600] RPC: Registered tcp transport module.
  310. [ 1.906607] RPC: Registered tcp NFSv4.1 backchannel transport module.
  311. [ 1.906740] Unpacking initramfs...
  312. [ 2.018202] Freeing initrd memory: 3724K (ffffffc073b8f000 - ffffffc073f32000)
  313. [ 2.021066] kvm [1]: Using HYP init bounce page @7b436000
  314. [ 2.021207] kvm [1]: interrupt-controller@c4304000 IRQ25
  315. [ 2.021347] kvm [1]: kvm_arch_timer: can't find DT node
  316. [ 2.021379] kvm [1]: error initializing Hyp mode: -19
  317. [ 2.021776] futex hash table entries: 1024 (order: 5, 131072 bytes)
  318. [ 2.021850] audit: initializing netlink subsys (disabled)
  319. [ 2.021886] audit: type=2000 audit(2.010:1): initialized
  320. [ 2.022265] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  321. [ 2.025837] VFS: Disk quotas dquot_6.5.2
  322. [ 2.025968] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  323. [ 2.027420] NFS: Registering the id_resolver key type
  324. [ 2.027454] Key type id_resolver registered
  325. [ 2.027462] Key type id_legacy registered
  326. [ 2.027474] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  327. [ 2.027496] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
  328. [ 2.028314] msgmni has been set to 3947
  329. [ 2.029027] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  330. [ 2.029089] io scheduler noop registered (default)
  331. [ 2.029099] io scheduler deadline registered
  332. [ 2.029119] io scheduler cfq registered
  333. [ 2.029632] meson-rng c8834000.rng: hwrng registered
  334. [ 2.029699] [drm] Initialized drm 1.1.0 20060810
  335. [ 2.029731] mali-utgard d00c0000.mali: max pp is 3
  336. [ 2.029741] mali-utgard d00c0000.mali: min pp is 3
  337. [ 2.029751] mali-utgard d00c0000.mali: min clk is 4
  338. [ 2.029766] mali-utgard d00c0000.mali: hiu io source 0xffffff80000b2000
  339. [ 2.029780] mali-utgard d00c0000.mali: hiu io source 0xffffff80000b8000
  340. [ 2.029791] mali-utgard d00c0000.mali: num of pp used most of time 3
  341. [ 2.029801] mali-utgard d00c0000.mali: clock dvfs table size is 6
  342. [ 2.029812] mali-utgard d00c0000.mali: max clk set 4
  343. [ 2.029820] mali-utgard d00c0000.mali: max clk is 4
  344. [ 2.029829] mali-utgard d00c0000.mali: turbo clk set to 5
  345. [ 2.029838] mali-utgard d00c0000.mali: turbo clk is 5
  346. [ 2.029848] mali-utgard d00c0000.mali: default clk is 4
  347. [ 2.029904] mali-utgard d00c0000.mali: ====================0====================
  348. [ 2.029904] clk_freq= 125000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<30 120>, clk_sample=125
  349. [ 2.029928] mali-utgard d00c0000.mali: ====================1====================
  350. [ 2.029928] clk_freq= 285000000, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285
  351. [ 2.029952] mali-utgard d00c0000.mali: ====================2====================
  352. [ 2.029952] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400
  353. [ 2.029975] mali-utgard d00c0000.mali: ====================3====================
  354. [ 2.029975] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500
  355. [ 2.029998] mali-utgard d00c0000.mali: ====================4====================
  356. [ 2.029998] clk_freq= 666000000, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666
  357. [ 2.030022] mali-utgard d00c0000.mali: ====================5====================
  358. [ 2.030022] clk_freq= 792000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=792
  359. [ 2.031313] gpu cooling register okay with err=0
  360. [ 2.031351] gpu core cooling register okay with err=0
  361. [ 2.031451] Mali: Mali device driver loaded
  362. [ 2.031558] UMP: UMP device driver loaded
  363. [ 2.033744] loop: module loaded
  364. [ 2.034266] mtdoops: mtd device (mtddev=name/number) must be supplied
  365. [ 2.041193] libphy: stmmac: probed
  366. [ 2.041214] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
  367. [ 2.041224] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
  368. [ 2.041479] usbcore: registered new interface driver cdc_ether
  369. [ 2.041533] usbcore: registered new interface driver cdc_ncm
  370. [ 2.041620] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  371. [ 2.041630] ehci-h20ahb: H20AHB-EHCI Host Controller driver
  372. [ 2.041699] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  373. [ 2.041766] usbcore: registered new interface driver cdc_acm
  374. [ 2.041775] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  375. [ 2.041815] usbcore: registered new interface driver usb-storage
  376. [ 2.041840] usbcore: registered new interface driver ums-cypress
  377. [ 2.041868] usbcore: registered new interface driver ums_eneub6250
  378. [ 2.042000] usbcore: registered new interface driver usbserial
  379. [ 2.042029] usbcore: registered new interface driver usbserial_generic
  380. [ 2.042055] usbserial: USB Serial support registered for generic
  381. [ 2.042331] mousedev: PS/2 mouse device common for all mice
  382. [ 2.042550] i2c /dev entries driver
  383. [ 2.043018] ledtrig-cpu: registered to indicate activity on CPUs
  384. [ 2.043073] hidraw: raw HID events driver (C) Jiri Kosina
  385. [ 2.043189] usbcore: registered new interface driver usbhid
  386. [ 2.043198] usbhid: USB HID core driver
  387. [ 2.043311] ==uart0 reg addr = ffffff80002124c0
  388. [ 2.043333] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
  389. [ 3.481672] console [ttyS0] enabled
  390. [ 3.485285] ==uart1 reg addr = ffffff80002144c0
  391. [ 3.489615] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
  392. [ 3.498934] enter cpufreq
  393. [ 3.501432] probe cpufreq okay
  394. [ 3.545506] dwc_otg: usb1: type: 1 speed: 0, config: 0, dma: 0, id: 1, phy: c0000020, ctrl: 0
  395. [ 3.551006] dwc_otg: Core Release: 3.10a
  396. [ 3.552255] dwc_otg: Setting default values for core params
  397. [ 3.557776] dwc_otg: curmode: 1, host_only: 1
  398. [ 3.564261] dwc_otg: Using Buffer DMA mode
  399. [ 3.566134] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
  400. [ 3.571222] dwc_otg: Working on port type = HOST
  401. [ 3.575905] dwc_otg dwc2_b: DWC OTG Controller
  402. [ 3.580209] dwc_otg dwc2_b: new USB bus registered, assigned bus number 1
  403. [ 3.586941] dwc_otg dwc2_b: irq 63, io mem 0x00000000
  404. [ 3.591929] dwc_otg: -------hcd->flags.d32 = 0
  405. [ 3.596336] dwc_otg: Init: Port Power? op_state=1
  406. [ 3.600978] dwc_otg: Init1: Power Port (0)
  407. [ 3.605441] hub 1-0:1.0: USB hub found
  408. [ 3.608755] hub 1-0:1.0: 1 port detected
  409. [ 3.612789] dwc_otg: usb0: type: 0 speed: 0, config: 0, dma: 0, id: 0, phy: c0000000, ctrl: 0
  410. [ 3.633645] dwc_otg: Core Release: 3.10a
  411. [ 3.633666] dwc_otg: Setting default values for core params
  412. [ 3.637458] dwc_otg: curmode: 1, host_only: 0
  413. [ 3.645935] dwc_otg: Using Buffer DMA mode
  414. [ 3.645956] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
  415. [ 3.650909] dwc_otg: Working on port type = OTG
  416. [ 3.655403] dwc_otg: Current port type: SLAVE
  417. [ 3.659761] dwc_otg dwc2_a: DWC OTG Controller
  418. [ 3.664121] dwc_otg dwc2_a: new USB bus registered, assigned bus number 2
  419. [ 3.670843] dwc_otg dwc2_a: irq 62, io mem 0x00000000
  420. [ 3.676130] hub 2-0:1.0: USB hub found
  421. [ 3.679556] hub 2-0:1.0: 1 port detected
  422. [ 3.683533] dwc_otg: Dedicated Tx FIFOs mode
  423. [ 3.687806] dwc_otg: using timer detectid change, ffffffc07af3b000
  424. [ 3.693976] BLASTER Driver Init
  425. [ 3.696969] secmon has 1 memory regions
  426. [ 3.700694] /secmon: could not find phandle
  427. [ 3.704826] secmon: probe done
  428. [ 3.707898] storage: storage in base: 0xffffffc010000000
  429. [ 3.713144] storage: storage out base: 0xffffffc010040000
  430. [ 3.718442] storage: storage block base: 0xffffffc010080000
  431. [ 3.723969] storage: probe done!
  432. [ 3.727193] Error: Driver 'ICPlus IP175C' is already registered, aborting...
  433. [ 3.734147] libphy: ICPlus IP175C: Error -16 in registering driver
  434. [ 3.740698] aml_sd_emmc_probe: line 2954
  435. [ 3.744153] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  436. [ 3.753678] aml_sd_emmc_reg_init 677
  437. [ 3.756998] pdata->caps 60007
  438. [ 3.759843] pdata->caps2 0
  439. [ 3.762525] get property: ocr_avail, value:0x00200080
  440. [ 3.768813] get property: f_min, value:0x00061a80
  441. [ 3.775115] get property: f_max, value:0x0510ff40
  442. [ 3.781405] get property: max_req_size, value:0x00020000
  443. [ 3.787746] get property: irq_in, value:0x00000003
  444. [ 3.794007] get property: irq_out, value:0x00000005
  445. [ 3.800295] get property: power_level, value:0x00000001
  446. [ 3.806603] get property: gpio_cd, str:
  447. [ 3.811854] get property: gpio_power, str:
  448. [ 3.817152] dwc_otg: Indeed it is in host mode hprt0 = 00021501
  449. [ 3.822999] get property: pinname, str:sd
  450. [ 3.828414] get property: jtag_pin, str:
  451. [ 3.833680] get property: card_type, value:0x00000005
  452. [ 3.839970] get property: gpio_dat3, str:
  453. [ 3.845239] get property: gpio_volsw, str:
  454. [ 3.903069] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  455. [ 3.903113] aml_sd_emmc_probe: line 2954
  456. [ 3.923016] [aml_is_card_insert] card IN
  457.  
  458. [ 3.923059] [aml_is_card_insert] card IN
  459. [ 3.923059] [ 3.929065] normal card in
  460. [ 3.952259] aml_sd_emmc_reg_init 677
  461. [ 3.952369] pdata->caps 80000d47
  462. [ 3.953402] pdata->caps2 80a1
  463. [ 3.956330] get property: ocr_avail, value:0x00200080
  464. [ 3.962634] get property: f_min, value:0x00061a80
  465. [ 3.968921] get property: f_max, value:0x05f5e100
  466. [ 3.975224] get property: max_req_size, value:0x00020000
  467. [ 3.981516] get property: pinname, str:emmc
  468. [ 3.987126] get property: card_type, value:0x00000001
  469. [ 3.993425] get property: gpio_dat3, str:
  470. [ 3.998678] get property: hw_reset, str:
  471. [ 4.001955] usb 1-1: new high-speed USB device number 2 using dwc_otg
  472. [ 4.010525] dwc_otg: Indeed it is in host mode hprt0 = 00001101
  473. [ 4.121934] aml_emmc_hw_reset 1356
  474. [ 4.127158] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  475. [ 4.127301] ion_dev has 1 memory regions
  476. [ 4.131131] /ion_dev: could not find phandle
  477. [ 4.135385] fb: osd_init_module
  478. [ 4.138440] [aml_sd_emmc_irq] emmc: resp_timeout,vstat:0x2800,virqc:3fff
  479.  
  480. [ 4.146244] aml_sd_emmc_data_thread 2211 emmc: cmd:1
  481. [ 4.146306] vout_serve: vout_init_module
  482. [ 4.146356] ge2d: ge2d_init_module
  483. [ 4.146364] ge2d: ge2d_dev major:242
  484. [ 4.162166] emmc: error -110 whilst initialising MMC card
  485. [ 4.162237] ge2d: ge2d clock is 400 MHZ
  486. [ 4.162240] ge2d: ge2d: pdev=ffffffc07ca1ee00, irq=182, rstc=0xffffffc07afd6300, clk=ffffffc07c934c00
  487. [ 4.162283] ge2d: mapped phy: 0xd0160000
  488. [ 4.162288] ge2d: ge2d start monitor
  489. [ 4.162550] codec:[tsync_pcr_init]init success.
  490. [ 4.162582] codec:regist mpeg12 codec profile
  491. [ 4.162611] codec:regist mpeg4 codec profile
  492. [ 4.162613] codec:amvdec_vc1 module init
  493. [ 4.162642] codec:regist vc1 codec profile
  494. [ 4.162644] codec:amvdec_h264 module init
  495. [ 4.162688] codec:regist h264 codec profile
  496. [ 4.162690] codec:amvdec_h264mvc module init
  497. [ 4.162717] codec:regist hmvc codec profile
  498. [ 4.162718] codec:amvdec_h264_4k2k module init
  499. [ 4.162746] codec:regist h264_4k2k codec profile
  500. [ 4.162748] codec:amvdec_h265 module init
  501. [ 4.162775] codec:regist hevc codec profile
  502. [ 4.162801] codec:regist mjpeg codec profile
  503. [ 4.162803] codec:amvdec_real module init
  504. [ 4.162829] codec:regist real codec profile
  505. [ 4.162830] codec:amvdec_avs module init
  506. [ 4.162857] codec:regist avs codec profile
  507. [ 4.162893] amvenc_avc_probe -- reserved memory config fail.
  508. [ 4.162895] amvenc_avc - cma memory pool size: 0 MB
  509. [ 4.162910] encode_wq_init.
  510. [ 4.162913] encode start monitor.
  511. [ 4.162922] ge2d: ge2d workqueue monitor start
  512. [ 4.163009] encode workqueue monitor start.
  513. [ 4.287801] jpegenc module init
  514. [ 4.290816] switch_vpu_mem_pd: vpu_arb ON
  515. [ 4.294833] tv_vout: tv_set_current_vmode[696]fps_target_mode=10
  516. [ 4.300623] tv_vout: mode is 10,sync_duration_den=1,sync_duration_num=60
  517. [ 4.307273] switch_vpu_mem_pd: vencp ON
  518. [ 4.311059] tv_vout: TV mode 720p60hz selected.
  519. [ 4.315577] tv_vout: new mode =720p60hz set ok
  520. [ 4.319960] vout_serve: vinfo mode is: 720p60hz
  521. [ 4.320371] hub 1-1:1.0: USB hub found
  522. [ 4.320660] hub 1-1:1.0: 4 ports detected
  523. [ 4.332151] codec:create_ge2d_work_queue video task ok
  524. [ 4.337383] codec:register clk_set_setting cpu[31]
  525. [ 4.342128] di_module_init ok.
  526. [ 4.344957] di_module_init: major 239
  527. [ 4.348784] efusekeynum: 4
  528. [ 4.351256] efusekeyname: mac offset: 0 size: 6
  529. [ 4.357480] efusekeyname: mac_bt offset: 6 size: 6
  530. [ 4.363679] efusekeyname: mac_wifi offset: 12 size: 6
  531. [ 4.369884] efusekeyname: usid offset: 18 size: 16
  532. [ 4.376197] secmon: secmon share mem in base: 0xffffffc0100fe000
  533. [ 4.382053] secmon: secmon share mem out base: 0xffffffc0100ff000
  534. [ 4.388082] efuse efuse: probe OK!
  535. [ 4.391536] 6aml_unifykeys_init done!
  536. [ 4.395158] ppmgr module init func called
  537. [ 4.399306] ionvideo-000: V4L2 device registered as video13
  538. [ 4.404650] [dsp]register dsp to char divece(257)
  539. [ 4.409528] amaudio: driver amaudio succuess!
  540. [ 4.413616] amlvideo_init called
  541. [ 4.416627] amlvideo_create_instance called
  542. [ 4.420943] v4l2_dev.name=:amlvideo-000
  543. [ 4.424796] amlvideo-000: V4L2 device registered as video10
  544. [ 4.430256]
  545. [ 4.430256]
  546. [ 4.430256] VECM init
  547. [ 4.430256]
  548. [ 4.437273] saradc c1108680.saradc: initialized by BL30
  549. [ 4.442166] saradc c1108680.saradc: calibration start:
  550. [ 4.447290] saradc c1108680.saradc: nominal=0, value=5
  551. [ 4.452383] saradc c1108680.saradc: nominal=256, value=252
  552. [ 4.457811] saradc c1108680.saradc: nominal=512, value=507
  553. [ 4.463250] saradc c1108680.saradc: nominal=768, value=763
  554. [ 4.468679] saradc c1108680.saradc: nominal=1023, value=1018
  555. [ 4.474248] saradc c1108680.saradc: calibration end: coef=4104C▒+$HH▒▒.480053] remote: Driver init
  556. [ 4.483494] aml-thermal aml-sensor@0: min state:500000 400 1 2
  557. [ 4.489182] aml-thermal aml-sensor@0: not found gpucore node
  558. [ 4.494615] aml-thermal aml-sensorB0: gpu coef:437, pp:3
  559. [ 4.504927] aml-thermal aml-sensor@0: cdev1 set upper to 3
  560. [ 4.505211] aml-thermal aml-sensor@0: cdev2 set upper to 3
  561. [ 4.510644] aml-thermal aml-sensor@0: cdev0 set upper to 3
  562. [ 4.518696] 6--------------------------------------------------------
  563. [ 4.522612] 6odroid_sysfs_init(321) : Sleep Enable !!
  564. [ 4.527692] 6--------------------------------------------------------
  565. [ 4.534244] input: vt-input as /devices/virtual/input/input0
  566. [ 4.539792] 6Virtual-Key input driver registered!!
  567. [ 4.544927] adbattery: android dummy battery driver loaded
  568. [ 4.550265] enter aml_soc_platform_pcm2bt_probe
  569. [ 4.554667] divider=16,frac=33920000,SDMval=4523
  570. [ 4.559109] enter aml_pcm_dai_probe
  571. [ 4.562512] [aml-spdif-dai]enter aml_dai_spdif_init
  572. [ 4.567342] aml_spdif_probe
  573. [ 4.570150] enter spdif_dit_probe
  574. [ 4.573022] sd: new high speed SDHC card at address 0001
  575. [ 4.573393] sd: clock 50000000, 4-bit-bus-width
  576. [ 4.573393]
  577. [ 4.573393] mmcblk0: sd:0001 00000 29.7 GiB
  578. [ 4.589430] odroid_hdmi_snd odroid_hdmi: dit-hifi <-> I2S mapping ok
  579. [ 4.595235] mmcblk0: p1
  580. [ 4.598305] GACT probability on
  581. [ 4.600779] Mirror/redirect action on
  582. [ 4.604418] u32 classifier
  583. [ 4.607070] Performance counters on
  584. [ 4.610865] input device check on
  585. [ 4.614511] Actions configured
  586. [ 4.617924] TCP: cubic registered
  587. [ 4.621448] NET: Registered protocol family 10
  588. [ 4.626130] mip6: Mobile IPv6
  589. [ 4.628463] NET: Registered protocol family 17
  590. [ 4.632894] NET: Registered protocol family 15
  591. [ 4.637288] Bridge firewalling registered
  592. [ 4.641289] Bluetooth: RFCOMM TTY layer initialized
  593. [ 4.646068] Bluetooth: RFCOMM socket layer initialized
  594. [ 4.651167] Bluetooth: RFCOMM ver 1.11
  595. [ 4.654865] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  596. [ 4.660114] Bluetooth: BNEP filters: protocol multicast
  597. [ 4.665309] Bluetooth: BNEP socket layer initialized
  598. [ 4.670205] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  599. [ 4.676081] Bluetooth: HIDP socket layer initialized
  600. [ 4.681040] NET: Registered protocol family 35
  601. [ 4.685434] Key type dns_resolver registered
  602. [ 4.689984] Registering SWP/SWPB emulation handler
  603. [ 4.694576] registered taskstats version 1
  604. [ 4.699025] bio: create slab <bio-1> at 1
  605. [ 4.702808] Btrfs loaded
  606. [ 4.704946] regulator-dummy: disabling
  607. [ 4.708820] Mali DRM initialize, driver name: mali_drm, version 2.1
  608. [ 4.714971] [drm] Initialized mali_drm 2.1.1 20140306 on minor 0
  609. [ 4.720757] Mali DRM initialize, driver name: mali_drm, version 2.1
  610. [ 4.727061] [drm] Initialized mali_drm 2.1.1 20140306 on minor 1
  611. [ 4.733009] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  612. [ 4.739964] 6enter meson_pm_probe!
  613. [ 4.742648] meson_pm_probe done
  614. [ 4.745831] ALSA device list:
  615. [ 4.748618] #0: ODROID-HDMI
  616. [ 4.751821] Freeing unused kernel memory: 576K (ffffffc001bef000 - ffffffc001c7f000)
  617. [ 4.783178] random: systemd-tmpfile: uninitialized urandom read (16 bytes read, 56 bits of entropy available)
  618. [ 4.792711] random: systemd-udevd: uninitialized urandom read (16 bytes read, 57 bits of entropy available)
  619. [ 4.796650] random: udevadm: uninitialized urandom read (16 bytes read, 57 bits of entropy available)
  620. [ 4.796746] random: udevadm: uninitialized urandom read (16 bytes read, 57 bits of entropy available)
  621. [ 4.815679] random: systemd-udevd: uninitialized urandom read (16 bytes read, 58 bits of entropy available)
  622. [ 4.826342] random: systemd-udevd: uninitialized urandom read (16 bytes read, 59 bits of entropy available)
  623. [ 4.834897] random: systemd-udevd: uninitialized urandom read (16 bytes read, 59 bits of entropy available)
  624. [ 4.836554] random: udevadm: uninitialized urandom read (16 bytes read, 59 bits of entropy available)
  625. [ 4.836691] random: udevadm: uninitialized urandom read (16 bytes read, 59 bits of entropy available)
  626. [ 4.836717] random: udevadm: uninitialized urandom read (16 bytes read, 59 bits of entropy available)
  627. [ 5.212855] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  628. [ 5.330557] random: nonblocking pool is initialized
  629. [ 6.013063] switch_vpu_mem_pd: viu_vd1 OFF
  630. [ 6.013086] switch_vpu_mem_pd: afbc_dec OFF
  631. [ 6.015668] switch_vpu_mem_pd: di_post OFF
  632. [ 6.019722] switch_vpu_mem_pd: viu_vd2 OFF
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!