API tools faq
paste
Advertisement
Guest User

SMARTCTL v7.3 on Intel Raid

a guest
Jul 5th, 2022
36
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.42 KB | None | 0 0
raw download clone embed print report
  1. $ sudo smartctl --scan ; echo "exit code: $(echo $?)"
  2. /dev/sda -d scsi # /dev/sda, SCSI device
  3. /dev/bus/1 -d megaraid,0 # /dev/bus/1 [megaraid_disk_00], SCSI device
  4. /dev/bus/1 -d megaraid,1 # /dev/bus/1 [megaraid_disk_01], SCSI device
  5. /dev/nvme0 -d nvme # /dev/nvme0, NVMe device
  6. /dev/nvme1 -d nvme # /dev/nvme1, NVMe device
  7. exit code: 0
  8.  
  9. $ sudo smartctl -x /dev/bus/1 -d megaraid,0; echo "exit code: $(echo $?)"
  10. smartctl 7.3 2022-02-28 r5338 [x86_64-linux-4.18.0-394.el8.x86_64] (local build)
  11. Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
  12.  
  13. === START OF INFORMATION SECTION ===
  14. Device Model: MTFDDAK480TDS
  15. Serial Number: <SN>
  16. LU WWN Device Id: 5 00a075 12f771dee
  17. Add. Product Id: DELL(tm)
  18. Firmware Version: D3DJ004
  19. User Capacity: 480,103,981,056 bytes [480 GB]
  20. Sector Sizes: 512 bytes logical, 4096 bytes physical
  21. Rotation Rate: Solid State Device
  22. Form Factor: 2.5 inches
  23. TRIM Command: Available, deterministic, zeroed
  24. Device is: Not in smartctl database 7.3/5319
  25. ATA Version is: ACS-4 (minor revision not indicated)
  26. SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
  27. Local Time is: Tue Jul 5 07:23:12 2022 PDT
  28. SMART support is: Available - device has SMART capability.
  29. SMART support is: Enabled
  30. AAM feature is: Unavailable
  31. APM level is: 254 (maximum performance)
  32. Rd look-ahead is: Enabled
  33. Write cache is: Enabled
  34. DSN feature is: Unavailable
  35. ATA Security is: Unavailable
  36. Write SCT (Get) Feature Control Command failed: ATA return descriptor not supported by controller firmware
  37. Wt Cache Reorder: Unknown (SCT Feature Control command failed)
  38.  
  39. === START OF READ SMART DATA SECTION ===
  40. SMART Status not supported: ATA return descriptor not supported by controller firmware
  41. SMART overall-health self-assessment test result: PASSED
  42. Warning: This result is based on an Attribute check.
  43.  
  44. General SMART Values:
  45. Offline data collection status: (0x00) Offline data collection activity
  46. was never started.
  47. Auto Offline Data Collection: Disabled.
  48. Self-test execution status: ( 0) The previous self-test routine completed
  49. without error or no self-test has ever
  50. been run.
  51. Total time to complete Offline
  52. data collection: ( 1224) seconds.
  53. Offline data collection
  54. capabilities: (0x7b) SMART execute Offline immediate.
  55. Auto Offline data collection on/off support.
  56. Suspend Offline collection upon new
  57. command.
  58. Offline surface scan supported.
  59. Self-test supported.
  60. Conveyance Self-test supported.
  61. Selective Self-test supported.
  62. SMART capabilities: (0x0003) Saves SMART data before entering
  63. power-saving mode.
  64. Supports SMART auto save timer.
  65. Error logging capability: (0x01) Error logging supported.
  66. General Purpose Logging supported.
  67. Short self-test routine
  68. recommended polling time: ( 2) minutes.
  69. Extended self-test routine
  70. recommended polling time: ( 22) minutes.
  71. Conveyance self-test routine
  72. recommended polling time: ( 3) minutes.
  73. SCT capabilities: (0x003d) SCT Status supported.
  74. SCT Error Recovery Control supported.
  75. SCT Feature Control supported.
  76. SCT Data Table supported.
  77.  
  78. SMART Attributes Data Structure revision number: 16
  79. Vendor Specific SMART Attributes with Thresholds:
  80. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  81. 1 Raw_Read_Error_Rate -OSR-K 100 100 050 - 0
  82. 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
  83. 9 Power_On_Hours -O--CK 100 100 000 - 7247
  84. 12 Power_Cycle_Count -O--CK 100 100 000 - 21
  85. 13 Read_Soft_Error_Rate -O--CK 100 100 000 - 0
  86. 173 Unknown_Attribute -O--CK 100 100 000 - 26
  87. 174 Unknown_Attribute -O--CK 100 100 000 - 18
  88. 175 Program_Fail_Count_Chip -O--CK 100 100 000 - 19
  89. 179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0
  90. 180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 2161
  91. 181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0
  92. 182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
  93. 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
  94. 184 End-to-End_Error -O--CK 100 100 000 - 0
  95. 188 Command_Timeout -O--CK 100 100 000 - 39
  96. 194 Temperature_Celsius -O---K 072 067 000 - 28 (Min/Max 20/33)
  97. 195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0
  98. 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
  99. 198 Offline_Uncorrectable ----CK 100 100 000 - 0
  100. 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
  101. 201 Unknown_SSD_Attribute PO--CK 100 100 001 - 0
  102. 202 Unknown_SSD_Attribute PO--CK 100 100 005 - 2028
  103. 206 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0
  104. 210 Unknown_Attribute -O--CK 100 100 000 - 0
  105. 233 Media_Wearout_Indicator -O--CK 100 100 000 - 21376455719
  106. 235 Unknown_Attribute -O--CK 100 100 000 - 21376455719
  107. 245 Unknown_Attribute ----CK 100 100 000 - 100
  108. 247 Unknown_Attribute -O--CK 100 100 000 - 668014833
  109. 248 Unknown_Attribute -O--CK 100 100 000 - 177443682
  110. 241 Total_LBAs_Written -O--CK 100 100 000 - 27054672480
  111. ||||||_ K auto-keep
  112. |||||__ C event count
  113. ||||___ R error rate
  114. |||____ S speed/performance
  115. ||_____ O updated online
  116. |______ P prefailure warning
  117.  
  118. General Purpose Log Directory Version 1
  119. SMART Log Directory Version 1 [multi-sector log support]
  120. Address Access R/W Size Description
  121. 0x00 GPL,SL R/O 1 Log Directory
  122. 0x01 SL R/O 1 Summary SMART error log
  123. 0x02 SL R/O 51 Comprehensive SMART error log
  124. 0x03 GPL R/O 16383 Ext. Comprehensive SMART error log
  125. 0x04 GPL,SL R/O 8 Device Statistics log
  126. 0x06 SL R/O 1 SMART self-test log
  127. 0x07 GPL R/O 1 Extended self-test log
  128. 0x09 SL R/W 1 Selective self-test log
  129. 0x10 GPL R/O 1 NCQ Command Error log
  130. 0x11 GPL R/O 1 SATA Phy Event Counters log
  131. 0x16 GPL R/W 1 Out Of Band Management Control log
  132. 0x24 GPL R/O 8000 Current Device Internal Status Data log
  133. 0x25 GPL R/O 8000 Saved Device Internal Status Data log
  134. 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
  135. 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  136. 0xa0 GPL VS 35328 Device vendor specific log
  137. 0xa1 GPL,SL VS 4 Device vendor specific log
  138. 0xa3 GPL VS 13824 Device vendor specific log
  139. 0xa4 GPL VS 354 Device vendor specific log
  140. 0xa4 SL VS 98 Device vendor specific log
  141. 0xa5 GPL VS 8000 Device vendor specific log
  142. 0xa5 SL VS 64 Device vendor specific log
  143. 0xa6 GPL VS 8000 Device vendor specific log
  144. 0xa6 SL VS 64 Device vendor specific log
  145. 0xa7 GPL VS 32768 Device vendor specific log
  146. 0xe0 GPL,SL R/W 1 SCT Command/Status
  147. 0xe1 GPL,SL R/W 1 SCT Data Transfer
  148.  
  149. SMART Extended Comprehensive Error Log Version: 1 (16383 sectors)
  150. No Errors Logged
  151.  
  152. SMART Extended Self-test Log Version: 1 (1 sectors)
  153. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  154. # 1 Short offline Completed without error 00% 6983 -
  155. # 2 Extended offline Completed without error 00% 1 -
  156. # 3 Short offline Completed without error 00% 1 -
  157.  
  158. SMART Selective self-test log data structure revision number 1
  159. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  160. 1 0 0 Not_testing
  161. 2 0 0 Not_testing
  162. 3 0 0 Not_testing
  163. 4 0 0 Not_testing
  164. 5 0 0 Not_testing
  165. Selective self-test flags (0x0):
  166. After scanning selected spans, do NOT read-scan remainder of disk.
  167. If Selective self-test is pending on power-up, resume after 0 minute delay.
  168.  
  169. SCT Status Version: 3
  170. SCT Version (vendor specific): 1 (0x0001)
  171. Device State: Active (0)
  172. Current Temperature: 28 Celsius
  173. Power Cycle Min/Max Temperature: 25/31 Celsius
  174. Lifetime Min/Max Temperature: 20/33 Celsius
  175. Specified Max Operating Temperature: 70 Celsius
  176. Under/Over Temperature Limit Count: 0/0
  177.  
  178. Write SCT Data Table failed: SMART WRITE LOG SECTOR may cause problems, try with -T permissive to force
  179. Read SCT Temperature History failed
  180.  
  181. Write SCT (Get) Error Recovery Control Command failed: ATA return descriptor not supported by controller firmware
  182. SCT (Get) Error Recovery Control command failed
  183.  
  184. Device Statistics (GP Log 0x04)
  185. Page Offset Size Value Flags Description
  186. 0x01 ===== = = === == General Statistics (rev 3) ==
  187. 0x01 0x008 4 21 --- Lifetime Power-On Resets
  188. 0x01 0x010 4 7247 --- Power-on Hours
  189. 0x01 0x018 6 21376455719 --- Logical Sectors Written
  190. 0x01 0x020 6 219445183 --- Number of Write Commands
  191. 0x01 0x028 6 33823032342 --- Logical Sectors Read
  192. 0x01 0x030 6 16158224 --- Number of Read Commands
  193. 0x01 0x038 6 26092740000 --- Date and Time TimeStamp
  194. 0x04 ===== = = === == General Errors Statistics (rev 1) ==
  195. 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
  196. 0x04 0x010 4 39 --- Resets Between Cmd Acceptance and Completion
  197. 0x05 ===== = = === == Temperature Statistics (rev 1) ==
  198. 0x05 0x008 1 28 --- Current Temperature
  199. 0x05 0x010 1 27 --- Average Short Term Temperature
  200. 0x05 0x018 1 27 --- Average Long Term Temperature
  201. 0x05 0x020 1 33 --- Highest Temperature
  202. 0x05 0x028 1 20 --- Lowest Temperature
  203. 0x05 0x030 1 28 --- Highest Average Short Term Temperature
  204. 0x05 0x038 1 26 --- Lowest Average Short Term Temperature
  205. 0x05 0x040 1 27 --- Highest Average Long Term Temperature
  206. 0x05 0x048 1 26 --- Lowest Average Long Term Temperature
  207. 0x05 0x050 4 0 --- Time in Over-Temperature
  208. 0x05 0x058 1 70 --- Specified Maximum Operating Temperature
  209. 0x05 0x060 4 0 --- Time in Under-Temperature
  210. 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
  211. 0x06 ===== = = === == Transport Statistics (rev 1) ==
  212. 0x06 0x008 4 39 --- Number of Hardware Resets
  213. 0x06 0x010 4 18 --- Number of ASR Events
  214. 0x06 0x018 4 0 --- Number of Interface CRC Errors
  215. 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
  216. 0x07 0x008 1 0 --- Percentage Used Endurance Indicator
  217. |||_ C monitored condition met
  218. ||__ D supports DSN
  219. |___ N normalized value
  220.  
  221. Pending Defects log (GP Log 0x0c) not supported
  222.  
  223. SATA Phy Event Counters (GP Log 0x11)
  224. ID Size Value Description
  225. 0x0001 4 0 Command failed due to ICRC error
  226. 0x0003 4 0 R_ERR response for device-to-host data FIS
  227. 0x0004 4 0 R_ERR response for host-to-device data FIS
  228. 0x0006 4 0 R_ERR response for device-to-host non-data FIS
  229. 0x000a 4 12 Device-to-host register FISes sent due to a COMRESET
  230. 0x000b 4 0 CRC errors within host-to-device FIS
  231. 0x000d 4 0 Non-CRC errors within host-to-device FIS
  232.  
  233. exit code: 4
  234.  
  235. $ sudo smartctl -r ioctl,2 -H /dev/bus/1 -d megaraid,0; echo "exit code: $(echo $?)"
  236. smartctl 7.3 2022-02-28 r5338 [x86_64-linux-4.18.0-394.el8.x86_64] (local build)
  237. Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
  238.  
  239. Creating /dev/megaraid_sas_ioctl_node = 17
  240. [inquiry: 12 00 00 00 24 00 ]
  241. Got MegaRAID inquiry.. ATA MTFDDAK480TDS J004
  242. [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
  243. /dev/bus/1 [megaraid_disk_00] [SAT]: Device open changed type from 'megaraid,0' to 'sat+megaraid,0'
  244.  
  245. REPORT-IOCTL: Device=/dev/bus/1 Command=IDENTIFY DEVICE
  246. Input: FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN
  247. [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
  248. [Duration: 0.000390s]
  249. REPORT-IOCTL: Device=/dev/bus/1 Command=IDENTIFY DEVICE returned 0
  250.  
  251. ===== [IDENTIFY DEVICE] DATA START (BASE-16) =====
  252. 000-015: 40 04 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 |@..?7.......?...|
  253. 016-031: 00 00 00 00 20 20 20 20 20 20 20 20 31 32 32 32 |.... 1222|
  254. 032-047: 46 32 37 37 44 31 45 45 00 00 00 00 00 00 44 20 |F277D1EE......D |
  255. 048-063: 44 33 30 4a 34 30 54 4d 44 46 41 44 34 4b 30 38 |D30J40TMDFAD4K08|
  256. 064-079: 44 54 20 53 20 20 20 20 20 20 20 20 20 20 20 20 |DT S |
  257. 080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 | ..|
  258. 096-111: 00 40 00 2f 01 40 00 00 00 00 06 00 ff 3f 10 00 |.@./.@.......?..|
  259. 112-127: 3f 00 10 fc fb 00 10 bd ff ff ff 0f 00 00 07 00 |?...............|
  260. 128-143: 03 00 78 00 78 00 78 00 78 00 20 4d 00 00 00 00 |..x.x.x.x. M....|
  261. 144-159: 00 00 00 00 00 00 1f 00 0e 95 06 02 44 00 44 00 |............D.D.|
  262. 160-175: f8 0f ff ff 69 70 09 74 23 61 69 70 09 b4 23 61 |....ip.t#aip..#a|
  263. 176-191: 7f 40 00 00 00 00 fe 00 00 00 00 00 00 00 00 00 |.@..............|
  264. 192-207: 00 00 00 00 00 00 00 00 b0 36 e4 37 00 00 00 00 |.........6.7....|
  265. 208-223: 00 00 08 00 03 60 00 00 0a 50 51 07 77 2f ee 1d |.....`...PQ.w/..|
  266. 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5e 41 |..............^A|
  267. 240-255: 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.@..............|
  268. 256-271: 00 00 36 31 32 65 35 64 20 66 20 20 20 20 20 20 |..612e5d f |
  269. 272-287: 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ..............|
  270. 288-303: 00 00 00 00 00 00 54 4d 44 46 41 44 34 4b 30 38 |......TMDFAD4K08|
  271. 304-319: 44 54 20 53 00 00 00 00 00 00 00 00 00 00 00 00 |DT S............|
  272. 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  273. 336-351: 03 00 01 00 45 44 4c 4c 74 28 29 6d 00 00 00 00 |....EDLLt()m....|
  274. 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  275. 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  276. 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  277. 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 3d 00 00 00 |............=...|
  278. 416-431: 00 00 00 40 00 00 00 00 00 00 01 00 00 00 00 00 |...@............|
  279. 432-447: 00 00 01 00 00 00 00 00 00 00 00 00 ff 11 00 00 |................|
  280. 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  281. 464-479: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 |................|
  282. 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  283. 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 c2 |................|
  284. ===== [IDENTIFY DEVICE] DATA END (512 Bytes) =====
  285.  
  286.  
  287. REPORT-IOCTL: Device=/dev/bus/1 Command=SMART READ ATTRIBUTE VALUES
  288. Input: FR=0xd0, SC=0x01, LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
  289. [ata pass-through(16): 85 08 0e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00 ]
  290. [Duration: 0.001699s]
  291. REPORT-IOCTL: Device=/dev/bus/1 Command=SMART READ ATTRIBUTE VALUES returned 0
  292.  
  293. ===== [SMART READ ATTRIBUTE VALUES] DATA START (BASE-16) =====
  294. 000-015: 10 00 01 2e 00 64 64 00 00 00 00 00 00 00 05 33 |.....dd........3|
  295. 016-031: 00 64 64 00 00 00 00 00 00 00 09 32 00 64 64 4f |.dd........2.ddO|
  296. 032-047: 1c 00 00 00 00 00 0c 32 00 64 64 15 00 00 00 00 |.......2.dd.....|
  297. 048-063: 00 00 0d 32 00 64 64 00 00 00 00 00 00 00 ad 32 |...2.dd........2|
  298. 064-079: 00 64 64 1a 00 00 00 00 00 00 ae 32 00 64 64 12 |.dd........2.dd.|
  299. 080-095: 00 00 00 00 00 00 af 32 00 64 64 13 00 00 00 00 |.......2.dd.....|
  300. 096-111: 00 00 b3 33 00 64 64 00 00 00 00 00 00 00 b4 32 |...3.dd........2|
  301. 112-127: 00 64 64 71 08 00 00 00 00 00 b5 32 00 64 64 00 |.ddq.......2.dd.|
  302. 128-143: 00 00 00 00 00 00 b6 32 00 64 64 00 00 00 00 00 |.......2.dd.....|
  303. 144-159: 00 00 b7 32 00 64 64 00 00 00 00 00 00 00 b8 32 |...2.dd........2|
  304. 160-175: 00 64 64 00 00 00 00 00 00 00 bc 32 00 64 64 27 |.dd........2.dd'|
  305. 176-191: 00 00 00 00 00 00 c2 22 00 48 43 1c 00 14 00 21 |.......".HC....!|
  306. 192-207: 00 00 c3 32 00 64 64 00 00 00 00 00 00 00 c4 32 |...2.dd........2|
  307. 208-223: 00 64 64 00 00 00 00 00 00 00 c6 30 00 64 64 00 |.dd........0.dd.|
  308. 224-239: 00 00 00 00 00 00 c7 32 00 64 64 00 00 00 00 00 |.......2.dd.....|
  309. 240-255: 00 00 c9 33 00 64 64 00 00 00 00 00 00 00 ca 33 |...3.dd........3|
  310. 256-271: 00 64 64 ec 07 00 00 00 00 00 ce 0e 00 64 64 00 |.dd..........dd.|
  311. 272-287: 00 00 00 00 00 00 d2 32 00 64 64 00 00 00 00 00 |.......2.dd.....|
  312. 288-303: 00 00 e9 32 00 64 64 37 18 23 fa 04 00 00 eb 32 |...2.dd7.#.....2|
  313. 304-319: 00 64 64 37 18 23 fa 04 00 00 f5 30 00 64 64 64 |.dd7.#.....0.ddd|
  314. 320-335: 00 00 00 00 00 00 f7 32 00 64 64 0d 1b d1 27 00 |.......2.dd...'.|
  315. 336-351: 00 00 f8 32 00 64 64 a2 93 93 0a 00 00 00 f1 32 |...2.dd........2|
  316. 352-367: 00 64 64 c0 d5 95 4c 06 00 00 00 00 c8 04 00 7b |.dd...L........{|
  317. 368-383: 03 00 01 80 02 16 03 00 00 00 00 00 00 00 00 00 |................|
  318. 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  319. 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  320. 416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  321. 432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  322. 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  323. 464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  324. 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  325. 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fd |................|
  326. ===== [SMART READ ATTRIBUTE VALUES] DATA END (512 Bytes) =====
  327.  
  328.  
  329. REPORT-IOCTL: Device=/dev/bus/1 Command=SMART READ ATTRIBUTE THRESHOLDS
  330. Input: FR=0xd1, SC=0x01, LL=0x01, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
  331. [ata pass-through(16): 85 08 0e 00 d1 00 01 00 01 00 4f 00 c2 00 b0 00 ]
  332. [Duration: 0.000353s]
  333. REPORT-IOCTL: Device=/dev/bus/1 Command=SMART READ ATTRIBUTE THRESHOLDS returned 0
  334.  
  335. ===== [SMART READ ATTRIBUTE THRESHOLDS] DATA START (BASE-16) =====
  336. 000-015: 10 00 01 32 00 00 00 00 00 00 00 00 00 00 05 0a |...2............|
  337. 016-031: 00 00 00 00 00 00 00 00 00 00 09 00 00 00 00 00 |................|
  338. 032-047: 00 00 00 00 00 00 0c 00 00 00 00 00 00 00 00 00 |................|
  339. 048-063: 00 00 0d 00 00 00 00 00 00 00 00 00 00 00 ad 00 |................|
  340. 064-079: 00 00 00 00 00 00 00 00 00 00 ae 00 00 00 00 00 |................|
  341. 080-095: 00 00 00 00 00 00 af 00 00 00 00 00 00 00 00 00 |................|
  342. 096-111: 00 00 b3 0a 00 00 00 00 00 00 00 00 00 00 b4 00 |................|
  343. 112-127: 00 00 00 00 00 00 00 00 00 00 b5 00 00 00 00 00 |................|
  344. 128-143: 00 00 00 00 00 00 b6 00 00 00 00 00 00 00 00 00 |................|
  345. 144-159: 00 00 b7 00 00 00 00 00 00 00 00 00 00 00 b8 00 |................|
  346. 160-175: 00 00 00 00 00 00 00 00 00 00 bc 00 00 00 00 00 |................|
  347. 176-191: 00 00 00 00 00 00 c2 00 00 00 00 00 00 00 00 00 |................|
  348. 192-207: 00 00 c3 00 00 00 00 00 00 00 00 00 00 00 c4 00 |................|
  349. 208-223: 00 00 00 00 00 00 00 00 00 00 c6 00 00 00 00 00 |................|
  350. 224-239: 00 00 00 00 00 00 c7 00 00 00 00 00 00 00 00 00 |................|
  351. 240-255: 00 00 c9 01 00 00 00 00 00 00 00 00 00 00 ca 05 |................|
  352. 256-271: 00 00 00 00 00 00 00 00 00 00 ce 00 00 00 00 00 |................|
  353. 272-287: 00 00 00 00 00 00 d2 00 00 00 00 00 00 00 00 00 |................|
  354. 288-303: 00 00 e9 00 00 00 00 00 00 00 00 00 00 00 eb 00 |................|
  355. 304-319: 00 00 00 00 00 00 00 00 00 00 f5 00 00 00 00 00 |................|
  356. 320-335: 00 00 00 00 00 00 f7 00 00 00 00 00 00 00 00 00 |................|
  357. 336-351: 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 f1 00 |................|
  358. 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  359. 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  360. 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  361. 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  362. 416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  363. 432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  364. 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  365. 464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  366. 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
  367. 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c3 |................|
  368. ===== [SMART READ ATTRIBUTE THRESHOLDS] DATA END (512 Bytes) =====
  369.  
  370. === START OF READ SMART DATA SECTION ===
  371.  
  372. REPORT-IOCTL: Device=/dev/bus/1 Command=SMART STATUS CHECK
  373. Input: FR=0xda, SC=...., LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0
  374. [ata pass-through(16): 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ]
  375. sat_device::ata_pass_through: scsi_pass_through() failed, errno=38 [ATA return descriptor not supported by controller firmware]
  376. [Duration: 0.000006s]
  377. REPORT-IOCTL: Device=/dev/bus/1 Command=SMART STATUS CHECK returned -1 errno=38 [ATA return descriptor not supported by controller firmware]
  378. SMART Status not supported: ATA return descriptor not supported by controller firmware
  379. SMART overall-health self-assessment test result: PASSED
  380. Warning: This result is based on an Attribute check.
  381.  
  382. exit code: 0
  383.  
  384. $ lspci | grep -i raid
  385. 00:11.5 RAID bus controller: Intel Corporation C620 Series Chipset Family SSATA Controller [RAID mode] (rev 09)
  386. 00:17.0 RAID bus controller: Intel Corporation C620 Series Chipset Family SATA Controller [RAID mode] (rev 09)
  387. 86:00.0 RAID bus controller: Broadcom / LSI MegaRAID SAS-3 3108 [Invader] (rev 02)
  388.  
  389. $ sudo lshw -c disk -c storage
  390. *-raid:0
  391. description: RAID bus controller
  392. product: C620 Series Chipset Family SSATA Controller [RAID mode]
  393. vendor: Intel Corporation
  394. physical id: 11.5
  395. bus info: pci@0000:00:11.5
  396. version: 09
  397. width: 32 bits
  398. clock: 66MHz
  399. capabilities: raid msi pm bus_master cap_list
  400. configuration: driver=ahci latency=0
  401. resources: irq:65 memory:92f16000-92f17fff memory:92f1f000-92f1f0ff ioport:2068(size=8) ioport:2074(size=4) ioport:2040(size=32) memory:92e80000-92efffff
  402. *-raid:1
  403. description: RAID bus controller
  404. product: C620 Series Chipset Family SATA Controller [RAID mode]
  405. vendor: Intel Corporation
  406. physical id: 17
  407. bus info: pci@0000:00:17.0
  408. version: 09
  409. width: 32 bits
  410. clock: 66MHz
  411. capabilities: raid msi pm bus_master cap_list
  412. configuration: driver=ahci latency=0
  413. resources: irq:249 memory:92f14000-92f15fff memory:92f1e000-92f1e0ff ioport:2060(size=8) ioport:2070(size=4) ioport:2020(size=32) memory:92e00000-92e7ffff
  414. *-nvme
  415. description: NVMe device
  416. product: Dell Ent NVMe AGN MU U.2 1.6TB
  417. vendor: Samsung Electronics Co Ltd
  418. physical id: 0
  419. bus info: pci@0000:6a:00.0
  420. logical name: /dev/nvme0
  421. version: 2.1.2
  422. serial: <SN1>
  423. width: 64 bits
  424. clock: 33MHz
  425. capabilities: nvme pm msi pciexpress msix nvm_express bus_master cap_list
  426. configuration: driver=nvme latency=0 nqn=nqn.1994-11.com.samsung:nvme:PM1733:2.5-inch:S61ENE0R302461 state=live
  427. resources: irq:27 memory:bb400000-bb407fff
  428. *-namespace:0
  429. description: NVMe disk
  430. physical id: 0
  431. logical name: /dev/ng0n1
  432. *-raid
  433. description: RAID bus controller
  434. product: MegaRAID SAS-3 3108 [Invader]
  435. vendor: Broadcom / LSI
  436. physical id: 0
  437. bus info: pci@0000:86:00.0
  438. logical name: scsi1
  439. version: 02
  440. width: 64 bits
  441. clock: 33MHz
  442. capabilities: raid pm pciexpress msi msix bus_master cap_list rom
  443. configuration: driver=megaraid_sas latency=0
  444. resources: irq:66 ioport:a000(size=256) memory:d3900000-d390ffff memory:d3800000-d38fffff
  445. *-disk
  446. description: SCSI Disk
  447. product: PERC H730P Adp
  448. vendor: DELL
  449. physical id: 2.0.0
  450. bus info: scsi@1:2.0.0
  451. logical name: /dev/sda
  452. version: 4.30
  453. serial: <SN7ce>
  454. size: 446GiB (479GB)
  455. capabilities: gpt-1.00 partitioned partitioned:gpt
  456. configuration: ansiversion=5 guid=f151b0e4-b8d1-4fc0-85dd-0981d0b6932d logicalsectorsize=512 sectorsize=4096
  457. *-nvme
  458. description: NVMe device
  459. product: Dell Ent NVMe AGN MU U.2 1.6TB
  460. vendor: Samsung Electronics Co Ltd
  461. physical id: 0
  462. bus info: pci@0000:bb:00.0
  463. logical name: /dev/nvme1
  464. version: 2.1.2
  465. serial: <SN9>
  466. width: 64 bits
  467. clock: 33MHz
  468. capabilities: nvme pm msi pciexpress msix nvm_express bus_master cap_list
  469. configuration: driver=nvme latency=0 nqn=nqn.1994-11.com.samsung:nvme:PM1733:2.5-inch:S61ENE0R302459 state=live
  470. resources: irq:46 memory:e3c00000-e3c07fff
  471. *-namespace:0
  472. description: NVMe disk
  473. physical id: 0
  474. logical name: /dev/ng1n1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!