MCV Boot

U-Boot SPL 2017.09 (Dec 05 2017 - 17:00:45)
/work/aries/release/mcvevk/tmp/work/mcvevk-poky-linux-gnueabi/u-boot/1_2017.09-r0/git/drivers/ddr/altera/sequencer.c: Preparing to start memory calibration
/work/aries/release/mcvevk/tmp/work/mcvevk-poky-linux-gnueabi/u-boot/1_2017.09-r0/git/drivers/ddr/altera/sequencer.c: CALIBRATION PASSED
/work/aries/release/mcvevk/tmp/work/mcvevk-poky-linux-gnueabi/u-boot/1_2017.09-r0/git/drivers/ddr/altera/sequencer.c: Calibration complete
Trying to boot from MMC1


U-Boot 2017.09 (Dec 05 2017 - 17:00:45 +0100)

CPU:   Altera SoCFPGA Platform
FPGA:  Altera Cyclone V, SE/A6 or SX/C6 or ST/D6, version 0x0
BOOT:  SD/MMC Internal Transceiver (3.0V)
       Watchdog enabled
I2C:   ready
DRAM:  1 GiB
MMC:   dwmmc0@ff704000: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Aries MCVEVK
Net:
Error: ethernet@ff700000 address not set.
No ethernet found.
Hit any key to stop autoboot:  0
3666596 bytes read in 249 ms (14 MiB/s)
## Loading kernel from FIT Image at 10000000 ...
   Using 'conf@socfpga_cyclone5_mcvevk.dtb' configuration
   Trying 'kernel@1' kernel subimage
     Description:  Linux kernel
     Created:      2017-12-05  15:47:10 UTC
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0x1000011c
     Data Size:    3638576 Bytes = 3.5 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x00008000
     Entry Point:  0x00008000
     Hash algo:    sha1
     Hash value:   867ce5f1e3aa5eff24f507066be43981818f3303
   Verifying Hash Integrity ... sha1+ OK
## Loading fdt from FIT Image at 10000000 ...
   Using 'conf@socfpga_cyclone5_mcvevk.dtb' configuration
   Trying 'fdt@socfpga_cyclone5_mcvevk.dtb' fdt subimage
     Description:  Flattened Device Tree blob
     Created:      2017-12-05  15:47:10 UTC
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x10378758
     Data Size:    26032 Bytes = 25.4 KiB
     Architecture: ARM
     Hash algo:    sha1
     Hash value:   2b3a9d68c6aa9cc3ed67951682a0ba63dae2fbf4
   Verifying Hash Integrity ... sha1+ OK
   Booting using the fdt blob at 0x10378758
   Loading Kernel Image ... OK
   reserving fdt memory region: addr=0 size=1000
   Loading Device Tree to 03ff6000, end 03fff5af ... OK

Starting kernel ...

Booting Linux on physical CPU 0x0
Linux version 4.12.14-yocto-standard (oe-user@oe-host) (gcc version 7.2.0 (GCC) ) #1 SMP PREEMPT Tue Dec 5 16:46:56 CET 2017
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt: Machine model: Aries/DENX MCV EVK
Memory policy: Data cache writealloc
Ignoring RAM at 0x30000000-0x40000000
Consider using a HIGHMEM enabled kernel.
cma: Reserved 16 MiB at 0x2f000000
percpu: Embedded 17 pages/cpu @ee8fb000 s40076 r8192 d21364 u69632
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 194880
Kernel command line: root=/dev/mmcblk0p3 rw rootwait console=ttyS0,115200 nohlt panic=1
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 748364K/786432K available (8192K kernel code, 617K rwdata, 2276K rodata, 1024K init, 728K bss, 21684K reserved, 16384K cma-reserved)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc0900000   (9184 kB)
      .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
      .data : 0xc0d00000 - 0xc0d9a520   ( 618 kB)
       .bss : 0xc0da34b8 - 0xc0e59740   ( 729 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
ftrace: allocating 28509 entries in 84 pages
Preemptible hierarchical RCU implementation.
NR_IRQS:16 nr_irqs:16 16
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 8 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410030c9, AUX_CTRL 0x76460001
GIC: PPI13 is secure or misconfigured
GIC: PPI13 is secure or misconfigured
clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 21474836475ns
Switching to timer-based delay loop, resolution 10ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 200.00 BogoMIPS (lpj=1000000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100060
smp: Bringing up secondary CPUs ...
GIC: PPI13 is secure or misconfigured
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
smp: Brought up 1 node, 2 CPUs
SMP: Total of 2 processors activated (400.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
xor: measuring software checksum speed
   arm4regs  :  1216.800 MB/sec
   8regs     :   926.400 MB/sec
   32regs    :   979.200 MB/sec
xor: using function: arm4regs (1216.800 MB/sec)
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
cpuidle: using governor menu
No ATAGs?
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
raid6: int32x1  gen()   141 MB/s
raid6: int32x1  xor()   115 MB/s
raid6: int32x2  gen()   139 MB/s
raid6: int32x2  xor()   131 MB/s
raid6: int32x4  gen()   135 MB/s
raid6: int32x4  xor()    95 MB/s
raid6: int32x8  gen()   137 MB/s
raid6: int32x8  xor()    97 MB/s
raid6: using algorithm int32x1 gen() 141 MB/s
raid6: .... xor() 115 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
stmpe-i2c 0-0041: stmpe811 configured in no-irq mode by platform data
stmpe-i2c 0-0041: stmpe811 does not support no-irq mode!
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
FPGA manager framework
fpga-region soc:base_fpga_region: FPGA Region probed
clocksource: Switched to clocksource timer1
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
workingset: timestamp_bits=14 max_order=18 bucket_order=4
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
fuse init (API version 7.26)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
console [ttyS0] disabled
ffc02000.serial0: ttyS0 at MMIO 0xffc02000 (irq = 45, base_baud = 6250000) is a 16550A
console [ttyS0] enabled
ffc03000.serial1: ttyS1 at MMIO 0xffc03000 (irq = 46, base_baud = 6250000) is a 16550A
brd: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
CAN device driver interface
c_can_platform ffc00000.can: c_can_platform device registered (regs=f0959000, irq=28)
c_can_platform ffc01000.can: c_can_platform device registered (regs=f095b000, irq=32)
socfpga-dwmac ff700000.ethernet: PTP uses main clock
stmmac - user ID: 0x10, Synopsys ID: 0x37
socfpga-dwmac ff700000.ethernet: Ring mode enabled
socfpga-dwmac ff700000.ethernet: DMA HW capability register supported
socfpga-dwmac ff700000.ethernet: Enhanced/Alternate descriptors
socfpga-dwmac ff700000.ethernet: Enabled extended descriptors
socfpga-dwmac ff700000.ethernet: RX Checksum Offload Engine supported
socfpga-dwmac ff700000.ethernet: COE Type 2
socfpga-dwmac ff700000.ethernet: TX Checksum insertion supported
socfpga-dwmac ff700000.ethernet: Enable RX Mitigation via HW Watchdog Timer
libphy: stmmac: probed
socfpga-dwmac ff700000.ethernet (unnamed net_device) (uninitialized): PHY ID 00221622 at 0 IRQ POLL (stmmac-0:00) active
dwc2 ffb40000.usb: ffb40000.usb supply vusb_d not found, using dummy regulator
dwc2 ffb40000.usb: ffb40000.usb supply vusb_a not found, using dummy regulator
dwc2 ffb40000.usb: EPs: 16, dedicated fifos, 8064 entries in SPRAM
dwc2 ffb40000.usb: DWC OTG Controller
dwc2 ffb40000.usb: new USB bus registered, assigned bus number 1
dwc2 ffb40000.usb: irq 47, io mem 0xffb40000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: DWC OTG Controller
usb usb1: Manufacturer: Linux 4.12.14-yocto-standard dwc2_hsotg
usb usb1: SerialNumber: ffb40000.usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
g_serial gadget: Gadget Serial v2.4
g_serial gadget: g_serial ready
dwc2 ffb40000.usb: bound driver g_serial
i2c /dev entries driver
Synopsys Designware Multimedia Card Interface Driver
dw_mmc ff704000.dwmmc0: IDMAC supports 32-bit address mode.
dw_mmc ff704000.dwmmc0: Using internal DMA controller.
dw_mmc ff704000.dwmmc0: Version ID is 240a
dw_mmc ff704000.dwmmc0: DW MMC controller at irq 40,32 bit host data width,1024 deep fifo
mmc_host mmc0: card is polling.
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
dw_mmc ff704000.dwmmc0: 1 slots initialized
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
fpga_manager fpga0: Altera SOCFPGA FPGA Manager registered
altera_hps2fpga_bridge ff400000.fpga_bridge: fpga bridge [lwhps2fpga] registered
altera_hps2fpga_bridge ff500000.fpga_bridge: fpga bridge [hps2fpga] registered
oprofile: using arm/armv7-ca9
u32 classifier
    Actions configured
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20170425 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20170425)
can: broadcast manager protocol (rev 20170425 t)
can: netlink gateway (rev 20170425) max_hops=1
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
Btrfs loaded, crc32c=crc32c-generic
Key type encrypted registered
console [netcon0] enabled
netconsole: network logging started
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
mmc0: new high speed MMC card at address 0001
mmcblk0: mmc0:0001 P1XXXX 3.60 GiB
hctosys: unable to open rtc device (rtc0)
mmcblk0boot0: mmc0:0001 P1XXXX partition 1 16.0 MiB
of_cfs_init
of_cfs_init: OK
OF: Duplicate name in testcase-data, renamed to "duplicate-name#1"
mmcblk0boot1: mmc0:0001 P1XXXX partition 2 16.0 MiB
 mmcblk0: p1 p2 p3
### dt-test ### start of unittest - you will see error messages
OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
irq: no irq domain found for /testcase-data/interrupts/intc0 !
OF: overlay: overlay_is_topmost: #5 clashes #6 @/testcase-data/overlay-node/test-bus/test-unittest8
OF: overlay: overlay #5 is not topmost
OF: resolver: overlay phandle fixup failed: -22
### dt-test ### resolve ot phandles (ret=-22), 1
### dt-test ### FAIL of_unittest_overlay_high_level():2231 Adding overlay 'overlay' failed
### dt-test ### FAIL of_unittest_overlay_high_level():2234 Adding overlay 'overlay_bad_phandle' failed
### dt-test ### end of unittest - 148 passed, 2 failed
ttyS0 - failed to request DMA
EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
random: fast init done
random: crng init done
EXT4-fs (mmcblk0p3): recovery complete
EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:3.
devtmpfs: mounted
Freeing unused kernel memory: 1024K
INIT: version 2.88 booting
Framebuffer /dev/fb0 not detected
Boot splashscreen disabled
EXT4-fs (mmcblk0p2): recovery complete
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Starting udev
udevd[130]: starting version 3.2.2
udevd[131]: starting eudev-3.2.2
EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
hwclock: can't open '/dev/misc/rtc': No such file or directory
Tue Dec  5 16:08:53 UTC 2017
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: Entering runlevel: 5
Configuring network interfaces... socfpga-dwmac ff700000.ethernet eth0: device MAC address 8e:78:2a:41:58:4f
Micrel KSZ9031 Gigabit PHY stmmac-0:00: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=stmmac-0:00, irq=-1)
socfpga-dwmac ff700000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
socfpga-dwmac ff700000.ethernet eth0: registered PTP clock
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udhcpc (v1.24.1) started
Sending discover...
Sending discover...
Sending discover...
No lease, forking to background
done.
Starting system message bus: dbus.
Starting OpenBSD Secure Shell server: sshd
done.
Starting rpcbind daemon...done.
starting statd: done
Starting atd: OK
hwclock: can't open '/dev/misc/rtc': No such file or directory
exportfs: can't open /etc/exports for reading
NFS daemon support not enabled in kernel
Starting system log daemon...0
Starting kernel log daemon...0
Starting crond: OK
umount: /mnt/.psplash: not mounted.

Poky (Yocto Project Reference Distro) 2.4 mcvevk /dev/ttyS0

mcvevk login: root
root@mcvevk:~#