avrdude output

root@BenNanoNote:/data/arduino/examples/1.Basics/Blink# avrdude -v -v -U flash:w
:applet/Blink.hex -V -F -C /etc/avrdude.conf -p atmega328p -c nanonote_ICSP

avrdude: Version 5.10, compiled on Mar  4 2011 at 10:33:23
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "/etc/avrdude.conf"
         User configuration file is "/root/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : unknown
         Using Programmer              : nanonote_ICSP
         AVR Part                      : ATMEGA328P
         Chip Erase delay              : 9000 us
         PAGEL                         : PD7
         BS2                           : PC2
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom        65     5     4    0 no       1024    4      0  3600  3600 0xff 0xff
           flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff
           lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

         Programmer Type : NANONOTE
         Description     : NanoNote ICSP 8:10 cable

avrdude: Calibrating delay loop... calibrated to 26 cycles per us
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
bitbang_cmd(): [ AC 53 00 00 ] [ FF FF FF FF ]
avrdude: AVR device not responding
avrdude: initialization failed, rc=-1
avrdude: AVR device initialized and ready to accept instructions
avrdude: Device signature = 0x000000
avrdude: Yikes!  Invalid device signature.
avrdude: Expected signature for ATMEGA328P is 1E 95 0F
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.

avrdude done.  Thank you.