API tools faq
paste
sta-s2z

Untitled

sta-s2z
May 6th, 2016
174
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 20.83 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 3.10.60 (sta@x360-a8) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 WITI-16042517) ) #21 Thu May 5 22:35:53 UTC 2016
  2. [ 0.000000]
  3. [ 0.000000] MediaTek SoC: MT7620A, RevID: 0206, RAM: DDR2, XTAL: 20MHz
  4. [ 0.000000] CPU/OCP/SYS frequency: 580/193/193 MHz
  5. [ 0.000000] PCIE: bypass PCIe DLL.
  6. [ 0.000000] PCIE: Elastic buffer control: Addr:0x68 -> 0xB4
  7. [ 0.000000] disable all power about PCIe
  8. [ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
  9. [ 0.000000] Software DMA cache coherency
  10. [ 0.000000] Determined physical RAM map:
  11. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  12. [ 0.000000] Initrd not found or empty - disabling initrd
  13. [ 0.000000] Zone ranges:
  14. [ 0.000000] Normal [mem 0x00000000-0x07ffffff]
  15. [ 0.000000] Movable zone start for each node
  16. [ 0.000000] Early memory node ranges
  17. [ 0.000000] node 0: [mem 0x00000000-0x07ffffff]
  18. [ 0.000000] On node 0 totalpages: 32768
  19. [ 0.000000] free_area_init_node: node 0, pgdat 803377c0, node_mem_map 81000000
  20. [ 0.000000] Normal zone: 256 pages used for memmap
  21. [ 0.000000] Normal zone: 0 pages reserved
  22. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  23. [ 0.000000] Primary instruction cache 64kB, 4-way, VIPT, linesize 32 bytes.
  24. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  25. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  26. [ 0.000000] pcpu-alloc: [0] 0
  27. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  28. [ 0.000000] Kernel command line: console=ttyS1,115200n8 root=/dev/mtdblock5
  29. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  30. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  31. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  32. [ 0.000000] Writing ErrCtl register=0003a920
  33. [ 0.000000] Readback ErrCtl register=0003a920
  34. [ 0.000000] Memory: 126124k/131072k available (2651k kernel code, 4948k reserved, 643k data, 224k init, 0k highmem)
  35. [ 0.000000] NR_IRQS:128
  36. [ 0.000000] console [ttyS1] enabled
  37. [ 0.092000] Calibrating delay loop... 385.02 BogoMIPS (lpj=770048)
  38. [ 0.124000] pid_max: default: 32768 minimum: 301
  39. [ 0.128000] Mount-cache hash table entries: 512
  40. [ 0.132000] NET: Registered protocol family 16
  41. [ 0.136000] RALINK_GPIOMODE = 1a311d
  42. [ 0.140000] RALINK_GPIOMODE = 18311d
  43. [ 0.140000] PPLL_CFG1=0xe74000
  44. [ 0.144000] MT7620 PPLL lock
  45. [ 0.144000] PPLL_DRV =0x80080504
  46. [ 0.148000] start PCIe register access
  47. [ 0.648000] RALINK_RSTCTRL = 2400000
  48. [ 0.652000] RALINK_CLKCFG1 = 75afffc0
  49. [ 0.652000]
  50. [ 0.652000] *************** MT7620 PCIe RC mode *************
  51. [ 1.152000] PCIE0 enabled
  52. [ 1.156000] Port 0 N_FTS = 1b105000
  53. [ 1.156000] init_rt2880pci done
  54. [ 1.180000] bio: create slab <bio-0> at 0
  55. [ 1.184000] PCI host bridge to bus 0000:00
  56. [ 1.188000] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
  57. [ 1.192000] pci_bus 0000:00: root bus resource [io 0x10160000-0x1016ffff]
  58. [ 1.196000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  59. [ 1.200000] pci 0000:00:00.0: [1814:0801] type 01 class 0x060400
  60. [ 1.200000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x7fffffff]
  61. [ 1.200000] pci 0000:00:00.0: reg 14: [mem 0x20200000-0x2020ffff]
  62. [ 1.200000] pci 0000:00:00.0: supports D1
  63. [ 1.200000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  64. [ 1.204000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  65. [ 1.204000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
  66. [ 1.204000] pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
  67. [ 1.208000] pci 0000:00:00.0: BAR 1: assigned [mem 0x20000000-0x2000ffff]
  68. [ 1.212000] pci 0000:00:00.0: PCI bridge to [bus 01]
  69. [ 1.216000] BAR0 at slot 0 = 0
  70. [ 1.216000] bus=0x0, slot = 0x0
  71. [ 1.220000] res[0]->start = 0
  72. [ 1.220000] res[0]->end = 0
  73. [ 1.224000] res[1]->start = 20000000
  74. [ 1.224000] res[1]->end = 2000ffff
  75. [ 1.228000] res[2]->start = 0
  76. [ 1.228000] res[2]->end = 0
  77. [ 1.232000] res[3]->start = 0
  78. [ 1.232000] res[3]->end = 0
  79. [ 1.236000] res[4]->start = 0
  80. [ 1.236000] res[4]->end = 0
  81. [ 1.240000] res[5]->start = 0
  82. [ 1.240000] res[5]->end = 0
  83. [ 1.244000] Switching to clocksource MIPS
  84. [ 1.248000] NET: Registered protocol family 2
  85. [ 1.256000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  86. [ 1.264000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  87. [ 1.268000] TCP: Hash tables configured (established 1024 bind 1024)
  88. [ 1.276000] TCP: reno registered
  89. [ 1.280000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  90. [ 1.284000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  91. [ 1.292000] NET: Registered protocol family 1
  92. [ 1.296000] PCI: CLS 80 bytes, default 32
  93. [ 1.296000] MTK/Ralink EHCI/OHCI init.
  94. [ 1.304000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  95. [ 1.308000] jffs2: version 2.2. (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  96. [ 1.320000] msgmni has been set to 246
  97. [ 1.324000] io scheduler noop registered (default)
  98. [ 1.328000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  99. [ 1.336000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 37) is a 16550A
  100. [ 1.344000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 12) is a 16550A
  101. [ 1.352000] Ralink gpio driver initialized
  102. [ 1.356000] Enable Ralink GDMA Controller Module
  103. [ 1.360000] GDMA IP Version=3
  104. [ 1.364000] spidrv_major = 217
  105. [ 1.368000] deice id : ef 40 18 0 0 (40180000)
  106. [ 1.372000] W25Q128BV(ef 40180000) (16384 Kbytes)
  107. [ 1.376000] mtd .name = raspi, .size = 0x01000000 (0M) .erasesize = 0x00000010 (0K) .numeraseregions = 65536
  108. [ 1.388000] Creating 5 MTD partitions on "raspi":
  109. [ 1.392000] 0x000000000000-0x000001000000 : "ALL"
  110. [ 1.400000] 0x000000000000-0x000000030000 : "Bootloader"
  111. [ 1.404000] 0x000000030000-0x000000040000 : "Config"
  112. [ 1.412000] 0x000000040000-0x000000050000 : "Factory"
  113. [ 1.420000] 0x000000050000-0x000001000000 : "firmware"
  114. [ 1.424000] 0x000000172c5a-0x000001000000 : "rootfs"
  115. [ 1.432000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  116. [ 1.444000] mtd: partition "rootfs_data" created automatically, ofs=0xa80000, len=0x580000
  117. [ 1.452000] 0x000000a80000-0x000001000000 : "rootfs_data"
  118. [ 1.460000] rdm_major = 253
  119. [ 1.472000] Ralink APSoC Ethernet Driver v3.2.3 (raeth)
  120. [ 1.476000] raeth: PDMA RX ring 256, PDMA TX ring 512. Max packet size 1536
  121. [ 1.484000] raeth: NAPI support, weight 32
  122. [ 1.488000] raeth: Byte Queue Limits (BQL) support
  123. [ 1.496000] Ralink APSoC Hardware Watchdog Timer
  124. [ 1.500000] TCP: cubic registered
  125. [ 1.504000] NET: Registered protocol family 10
  126. [ 1.508000] NET: Registered protocol family 17
  127. [ 1.512000] 8021q: 802.1Q VLAN Support v1.8
  128. [ 1.524000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
  129. [ 1.532000] Freeing unused kernel memory: 224K (80338000 - 80370000)
  130. [ 2.244000] init: Console is alive
  131. [ 2.248000] Started WatchDog Timer.
  132. [ 2.252000] init: - watchdog -
  133. [ 5.780000] usbcore: registered new interface driver usbfs
  134. [ 5.788000] usbcore: registered new interface driver hub
  135. [ 5.792000] usbcore: registered new device driver usb
  136. [ 5.804000] Button Hotplug driver version 0.4.1
  137. [ 5.812000] exFAT: Version 1.2.9
  138. [ 5.848000] ufsd: module license 'Commercial product' taints kernel.
  139. [ 5.856000] Disabling lock debugging due to kernel taint
  140. [ 5.872000] ufsd: driver (8.6, May 5 2016 22:25:42, LBD=ON, delalloc, ioctl, bdi) loaded at c02bf000
  141. [ 5.872000] NTFS (with native replay) support included
  142. [ 5.872000] optimized: speed
  143. [ 5.872000] Built_for__Asus_n65u_2012-03-29
  144. [ 5.872000]
  145. [ 5.908000] SCSI subsystem initialized
  146. [ 5.920000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  147. [ 5.928000] ehci-platform: EHCI generic platform driver
  148. [ 5.952000] ehci-platform ehci-platform: EHCI Host Controller
  149. [ 5.960000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  150. [ 5.968000] ehci-platform ehci-platform: irq 18, io mem 0x101c0000
  151. [ 5.984000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
  152. [ 5.988000] hub 1-0:1.0: USB hub found
  153. [ 5.992000] hub 1-0:1.0: 1 port detected
  154. [ 6.000000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  155. [ 6.028000] ohci-platform ohci-platform: Generic Platform OHCI Controller
  156. [ 6.036000] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
  157. [ 6.044000] ohci-platform ohci-platform: irq 18, io mem 0x101c1000
  158. [ 6.108000] hub 2-0:1.0: USB hub found
  159. [ 6.112000] hub 2-0:1.0: 1 port detected
  160. [ 6.128000] MTK MSDC device init.
  161. [ 6.148000] msdc0 -> ================ <- msdc_set_mclk() : L<685> PID<kmodloader><0x8e>
  162. [ 6.156000] msdc0 -> !!! Set<400KHz> Source<48000KHz> -> sclk<400KHz> <- msdc_set_mclk() : L<686> PID<kmodloader><0x8e>
  163. [ 6.164000] msdc0 -> ================ <- msdc_set_mclk() : L<687> PID<kmodloader><0x8e>
  164. [ 6.188000] msdc0 -> ops_get_cd return<1> <- msdc_ops_get_cd() : L<2316> PID<kworker/u2:0><0x6>
  165. [ 6.196000] msdc0 -> XXX CMD<52> MSDC_INT_CMDTMO <- msdc_irq() : L<2460>
  166. [ 6.204000] mtk-sd: MediaTek MT6575 MSDC Driver
  167. [ 6.208000] msdc0 -> XXX CMD<52> MSDC_INT_CMDTMO <- msdc_irq() : L<2460>
  168. [ 6.228000] usbcore: registered new interface driver usb-storage
  169. [ 6.232000] msdc0 -> XXX CMD<5> MSDC_INT_CMDTMO <- msdc_irq() : L<2460>
  170. [ 6.240000] msdc0 -> XXX CMD<5> MSDC_INT_CMDTMO <- msdc_irq() : L<2460>
  171. [ 6.248000] msdc0 -> XXX CMD<5> MSDC_INT_CMDTMO <- msdc_irq() : L<2460>
  172. [ 6.256000] msdc0 -> XXX CMD<5> MSDC_INT_CMDTMO <- msdc_irq() : L<2460>
  173. [ 6.292000] msdc0 -> SD data latch edge<1> <- msdc_ops_set_ios() : L<2249> PID<kworker/u2:0><0x6>
  174. [ 6.300000] msdc0 -> ================ <- msdc_set_mclk() : L<685> PID<kworker/u2:0><0x6>
  175. [ 6.308000] msdc0 -> !!! Set<48000KHz> Source<48000KHz> -> sclk<48000KHz> <- msdc_set_mclk() : L<686> PID<kworker/u2:0><0x6>
  176. [ 6.320000] msdc0 -> ================ <- msdc_set_mclk() : L<687> PID<kworker/u2:0><0x6>
  177. [ 6.328000] usb 1-1: new high-speed USB device number 2 using ehci-platform
  178. [ 6.336000] mmc0: new high speed SDHC card at address 0007
  179. [ 6.340000] mmcblk0: mmc0:0007 SD32G 29.3 GiB
  180. [ 6.348000] mmcblk0: p1
  181. [ 6.400000] init: - preinit -
  182. [ 7.028000] hub 1-1:1.0: USB hub found
  183. [ 7.032000] hub 1-1:1.0: 4 ports detected
  184. [ 7.176000] raeth: HW IP/TCP/UDP checksum RX/TX offload enabled
  185. [ 7.184000] raeth: HW VLAN TX offload enabled
  186. [ 7.188000] raeth: HW Scatter/Gather TX offload enabled
  187. [ 7.196000] mtk_esw - hw bridge: W|LLLL
  188. [ 7.312000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
  189. [ 10.364000] mount_root: loading kmods from internal overlay
  190. [ 10.780000] jffs2: notice: (252) jffs2_build_xattr_subsystem: complete building xattr subsystem, 45 of xdatum (0 unchecked, 44 orphan) and 55 of xref (0 dead, 44 orphan) found.
  191. [ 10.796000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
  192. [ 10.804000] block: unable to load configuration (fstab: Entry not found)
  193. [ 10.812000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
  194. [ 10.820000] block: extroot: not configured
  195. [ 10.864000] jffs2: notice: (249) jffs2_build_xattr_subsystem: complete building xattr subsystem, 45 of xdatum (0 unchecked, 44 orphan) and 55 of xref (0 dead, 44 orphan) found.
  196. [ 11.068000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
  197. [ 11.076000] block: unable to load configuration (fstab: Entry not found)
  198. [ 11.084000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
  199. [ 11.092000] block: extroot: not configured
  200. [ 11.096000] mount_root: switching to jffs2 overlay
  201. [ 11.136000] procd: - early -
  202. [ 11.136000] procd: - watchdog -
  203. [ 12.016000] procd: - ubus -
  204. [ 13.024000] procd: - init -
  205. [ 14.412000] NET: Registered protocol family 38
  206. [ 14.436000] FS-Cache: Loaded
  207. [ 14.472000] RPC: Registered named UNIX socket transport module.
  208. [ 14.480000] RPC: Registered udp transport module.
  209. [ 14.484000] RPC: Registered tcp transport module.
  210. [ 14.488000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  211. [ 14.540000] loop: loaded (max 8 devices)
  212. [ 14.600000] tun: Universal TUN/TAP device driver, 1.6
  213. [ 14.604000] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  214. [ 14.628000] l2tp_core: L2TP core driver, V2.0
  215. [ 14.636000] l2tp_netlink: L2TP netlink interface
  216. [ 14.644000] gre: GRE over IPv4 demultiplexor driver
  217. [ 14.656000] ip_gre: GRE over IPv4 tunneling driver
  218. [ 14.736000] Installing knfsd (copyright (C) 1996 [email protected]).
  219. [ 14.756000] nf_conntrack version 0.5.0 (1974 buckets, 7896 max)
  220. [ 14.780000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  221. [ 14.808000] cryptodev: driver 1.8 loaded.
  222. [ 14.832000] i2c /dev entries driver
  223. [ 14.840000] Ralink I2C Init
  224. [ 14.864000] u32 classifier
  225. [ 14.868000] input device check on
  226. [ 14.872000] Actions configured
  227. [ 14.880000] Mirror/redirect action on
  228. [ 14.896000] Failed to load ipt action
  229. [ 14.948000] fuse init (API version 7.22)
  230. [ 15.132000] MT76x2 AP Driver version: 3.0.4.0.P1
  231. [ 15.148000] usbcore: registered new interface driver cdc_wdm
  232. [ 15.160000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
  233. [ 15.168000] Backport generated by backports.git backports-20150129-0-gdd4a670
  234. [ 15.196000] ip_tables: (C) 2000-2006 Netfilter Core Team
  235. [ 15.204000] Type=Linux
  236. [ 15.220000] lib80211: common routines for IEEE802.11 drivers
  237. [ 15.224000] lib80211_crypt: registered algorithm 'NULL'
  238. [ 15.228000] lib80211_crypt: registered algorithm 'CCMP'
  239. [ 15.228000] lib80211_crypt: registered algorithm 'TKIP'
  240. [ 15.232000] lib80211_crypt: registered algorithm 'WEP'
  241. [ 15.320000] PPP generic driver version 2.4.2
  242. [ 15.332000] PPP MPPE Compression module registered
  243. [ 15.344000] NET: Registered protocol family 24
  244. [ 15.352000] PPTP driver version 0.8.5
  245. [ 15.376000] usbcore: registered new interface driver ums-alauda
  246. [ 15.392000] usbcore: registered new interface driver ums-cypress
  247. [ 15.404000] usbcore: registered new interface driver ums-datafab
  248. [ 15.416000] usbcore: registered new interface driver ums-freecom
  249. [ 15.428000] usbcore: registered new interface driver ums-isd200
  250. [ 15.440000] usbcore: registered new interface driver ums-jumpshot
  251. [ 15.452000] usbcore: registered new interface driver ums-karma
  252. [ 15.468000] usbcore: registered new interface driver ums-sddr09
  253. [ 15.484000] usbcore: registered new interface driver ums-sddr55
  254. [ 15.496000] usbcore: registered new interface driver ums-usbat
  255. [ 15.536000] usbcore: registered new interface driver usbserial
  256. [ 15.544000] usbcore: registered new interface driver usbserial_generic
  257. [ 15.548000] usbserial: USB Serial support registered for generic
  258. [ 15.652000] xt_time: kernel timezone is -0000
  259. [ 15.668000] usbcore: registered new interface driver asix
  260. [ 15.680000] usbcore: registered new interface driver cdc_ether
  261. [ 15.696000] usbcore: registered new interface driver cdc_ncm
  262. [ 15.704000] usbcore: registered new interface driver cdc_subset
  263. [ 15.812000] cfg80211: Calling CRDA to update world regulatory domain
  264. [ 15.828000] cfg80211: World regulatory domain updated:
  265. [ 15.832000] cfg80211: DFS Master region: unset
  266. [ 15.836000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  267. [ 15.848000] cfg80211: (2402000 KHz - 2494000 KHz @ 40000 KHz), (N/A, 2700 mBm), (N/A)
  268. [ 15.856000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2700 mBm), (N/A)
  269. [ 15.864000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2700 mBm), (N/A)
  270. [ 15.872000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2700 mBm), (N/A)
  271. [ 15.880000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2700 mBm), (N/A)
  272. [ 15.888000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  273. [ 15.896000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  274. [ 16.076000] usbcore: registered new interface driver qmi_wwan
  275. [ 16.088000] usbcore: registered new interface driver rndis_host
  276. [ 16.160000] usbcore: registered new interface driver snd-usb-audio
  277. [ 16.176000] usbcore: registered new interface driver cdc_mbim
  278. [ 16.196000] usbcore: registered new interface driver option
  279. [ 16.200000] usbserial: USB Serial support registered for GSM modem (1-port)
  280. [ 16.212000] usbcore: registered new interface driver rt2500usb
  281. [ 16.312000] usb 1-1.1: reset high-speed USB device number 3 using ehci-platform
  282. [ 16.420000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
  283. [ 16.456000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
  284. [ 16.464000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  285. [ 16.476000] usbcore: registered new interface driver rt2800usb
  286. [ 23.348000] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  287. [ 27.040000] Ralink HW NAT v2.52.0 Module Enabled, FoE Size: 16384
  288. [ 30.076000] ch1 bssid=0a:18:d6:35:51:99
  289. [ 30.080000] ch1 bssid=2e:a4:3c:e3:37:60
  290. [ 30.084000] ch1 bssid=2a:a4:3c:e3:37:60
  291. [ 30.088000] ch1 bssid=02:22:44:66:88:aa
  292. [ 30.092000] ch1 bssid=0e:18:d6:35:51:99
  293. [ 30.096000] ch1 bssid=c8:3a:35:d0:14:dc
  294. [ 30.100000] ch6 bssid=2e:a4:3c:d1:e1:f8
  295. [ 30.104000] ch6 bssid=2a:a4:3c:d1:e1:f8
  296. [ 30.108000] ch11 bssid=0a:18:d6:99:56:1b
  297. [ 30.112000] ch11 bssid=0e:18:d6:99:56:1b
  298. [ 30.116000] =====================================================
  299. [ 30.120000] Channel 1 : Dirty = 420, False CCA = 31, Busy Time = 0, Skip Channel = FALSE
  300. [ 30.128000] Channel 2 : Dirty = 232, False CCA = 91, Busy Time = 0, Skip Channel = FALSE
  301. [ 30.136000] Channel 3 : Dirty = 216, False CCA = 6, Busy Time = 0, Skip Channel = FALSE
  302. [ 30.144000] Channel 4 : Dirty = 200, False CCA = 7, Busy Time = 0, Skip Channel = FALSE
  303. [ 30.152000] Channel 5 : Dirty = 184, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
  304. [ 30.160000] Channel 6 : Dirty = 140, False CCA = 20, Busy Time = 0, Skip Channel = FALSE
  305. [ 30.172000] Channel 7 : Dirty = 104, False CCA = 196, Busy Time = 0, Skip Channel = FALSE
  306. [ 30.180000] Channel 8 : Dirty = 104, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
  307. [ 30.188000] Channel 9 : Dirty = 104, False CCA = 1, Busy Time = 0, Skip Channel = FALSE
  308. [ 30.196000] Channel 10 : Dirty = 104, False CCA = 6, Busy Time = 0, Skip Channel = FALSE
  309. [ 30.204000] Channel 11 : Dirty = 140, False CCA = 12, Busy Time = 0, Skip Channel = FALSE
  310. [ 30.212000] Channel 12 : Dirty = 64, False CCA = 12, Busy Time = 0, Skip Channel = FALSE
  311. [ 30.220000] Channel 13 : Dirty = 56, False CCA = 23, Busy Time = 0, Skip Channel = FALSE
  312. [ 30.228000] =====================================================
  313. [ 30.236000] Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 13
  314. [ 30.244000] Min Dirty = 160
  315. [ 30.244000] ExChannel = 9 , 0
  316. [ 30.248000] BW = 40
  317. [ 30.452000] raeth: HW IP/TCP/UDP checksum RX/TX offload enabled
  318. [ 30.460000] raeth: HW VLAN TX offload enabled
  319. [ 30.464000] raeth: HW Scatter/Gather TX offload enabled
  320. [ 30.472000] mtk_esw - hw bridge: W|LLLL
  321. [ 30.536000] device eth0.1 entered promiscuous mode
  322. [ 30.544000] device eth0 entered promiscuous mode
  323. [ 30.556000] br-lan: port 1(eth0.1) entered forwarding state
  324. [ 30.560000] br-lan: port 1(eth0.1) entered forwarding state
  325. [ 31.736000] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
  326. [ 31.984000] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
  327. [ 32.272000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  328. [ 32.560000] device ra0 entered promiscuous mode
  329. [ 32.564000] br-lan: port 1(eth0.1) entered forwarding state
  330. [ 32.572000] br-lan: port 2(ra0) entered forwarding state
  331. [ 32.576000] br-lan: port 2(ra0) entered forwarding state
  332. [ 34.180000] wlan0: authenticate with 2e:a4:3c:d1:e1:f8
  333. [ 34.228000] wlan0: send auth to 2e:a4:3c:d1:e1:f8 (try 1/3)
  334. [ 34.236000] wlan0: authenticated
  335. [ 34.244000] wlan0: associate with 2e:a4:3c:d1:e1:f8 (try 1/3)
  336. [ 34.252000] wlan0: RX AssocResp from 2e:a4:3c:d1:e1:f8 (capab=0x421 status=0 aid=2)
  337. [ 34.276000] wlan0: associated
  338. [ 34.276000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  339. [ 34.580000] br-lan: port 2(ra0) entered forwarding state
  340. [ 35.528000] Ralink HW NAT v2.52.0 Module Disabled
  341. [ 35.544000] Ralink HW NAT v2.52.0 Module Enabled, FoE Size: 16384
  342. [ 41.000000] Ralink HW NAT v2.52.0 Module Disabled
  343. [ 41.024000] Ralink HW NAT v2.52.0 Module Enabled, FoE Size: 16384
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!