Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [courier v.everything] -> definity -> h323/rtp -> asterisk -> PRI -> Cisco/MICA
- ypsi-c3845-1#show modem op 1/4
- Modem (1/4) Operational Status:
- Parameter #0 Disconnect Reason Info: (0x0)
- Type (=0 ): <unknown>
- Class (=0 ): Other
- Reason (=0 ): no disconnect has yet occurred
- Parameter #1 Connect Protocol: LAP-M
- Parameter #2 Compression: V.42bis both
- Parameter #3 EC Retransmission Count: 3
- Parameter #4 Self Test Error Count: 0
- Parameter #5 Call Timer: 101 secs
- Parameter #6 Total Retrains: 0
- Parameter #7 Sq Value: 3
- Parameter #8 Connected Standard: V.90
- Parameter #9 TX,RX Bit Rate: 50666, 26400
- Parameter #11 TX,RX Symbol Rate: 8000, 3200
- Parameter #13 TX,RX Carrier Frequency: 0, 1829
- Parameter #15 TX,RX Trellis Coding: 0, 16
- Parameter #16 TX,RX Preemphasis Index: 22, 0
- Parameter #17 TX,RX Constellation Shaping: Off, Off
- Parameter #18 TX,RX Nonlinear Encoding: Off, Off
- Parameter #19 TX,RX Precoding: Off, Off
- Parameter #20 TX,RX Xmit Level Reduction: 0, 3 dBm
- Parameter #21 Signal Noise Ratio: 36 dB
- Parameter #22 Receive Level: -15 dBm
- Parameter #23 Frequency Offset: 0.0 Hz
- Parameter #24 Phase Jitter Frequency: 0.0 Hz
- Parameter #25 Phase Jitter Level: 0 degrees
- Parameter #26 Far End Echo Level: -53 dBm
- Parameter #27 Phase Roll: 0.0 Hz
- Parameter #28 Round Trip Delay: 74 msecs
- Parameter #30 Characters transmitted, received: 1601, 69
- Parameter #32 General Portware Information: 22
- Parameter #33 PPP/SLIP packets transmitted, received: 0, 0
- Parameter #35 PPP/SLIP packets received (BAD/ABORTED): 0
- Parameter #36 EC packets transmitted, received OK: 65, 56
- Parameter #38 Moving Average of EC packets (Received BAD/ABORTED): 3
- Parameter #39 Robbed Bit Signalling (RBS) pattern: 0
- Parameter #40 Digital Pad: 5.250 dB, Digital Pad Compensation: Enabled
- Parameter #42 SS7/COT Status: 0
- Parameter #43 V110/PIAFS frames received bad: 0
- Parameter #44 V110/PIAFS frames received good: 0
- Parameter #45 V110/PIAFS frames transmitted: 0
- Parameter #46 V110/PIAFS sync lost: 0
- Parameter #93 PIAFS RTF: 0
- Parameter #120 Total Speedshifts: 2
- Parameter #108 Total MOH Time: 0 secs
- Parameter #109 Current MOH Time: 0 secs
- Parameter #105 MOH Status: Modem is Not on Hold
- Parameter #106 MOH Count: 0
- Parameter #107 MOH Request Count: 0
- Parameter #110 Retrains due to Call Waiting: 0
- Parameter #114 DC Encoder,Decoder State: stat not supported/stat not supported
- Parameter #115 DC TX,RX Compression Ratio: 0.0:1, 0.0:1
- Parameter #117 DC TX,RX Dictionary Reset Count: 0, 0
- Parameter #119 Diagnostic Code: 00 00 00 00 00 00 00 00
- Line Shape:
- ........................*
- ................................*
- .................................*
- .................................*
- .................................*
- .................................*
- .................................*
- .................................*
- .................................*
- .................................*
- .................................*
- .................................*
- .................................*
- .................................*
- .................................*
- .................................*
- .................................*
- .................................*
- .................................*
- ................................*
- ................................*
- ................................*
- ...............................*
- ............................*
- .......................*
Add Comment
Please, Sign In to add comment