API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Apr 23rd, 2019
10,777
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 44.51 KB | None | 0 0
raw download clone embed print report
  1. Insyde SW Setup Document,,,,
  2. ,,,,2019/ 4/24
  3. FormSet Advanced (A04A27F4-DF00-4D42-B552-39511302113D),,,,
  4. Form 32 (InsydeH2O Setup Utility),,,,
  5. PCI Configuration,,,,
  6. 2,PCI Slot3 IRQ Priority,"Auto,IRQ3,IRQ4,IRQ5,IRQ7,IRQ9,IRQ10,IRQ11",,"Manual IRQ selection does not garantee PCI slot device will be configured with choice because PnP ISA Cards (if present) are assigned the available resources before PCI device."
  7. 3,PCI Slot4 IRQ Priority,"Auto,IRQ3,IRQ4,IRQ5,IRQ7,IRQ9,IRQ10,IRQ11",,"Manual IRQ selection does not garantee PCI slot device will be configured with choice because PnP ISA Cards (if present) are assigned the available resources before PCI device."
  8. Form 33 (InsydeH2O Setup Utility),,,,
  9. Boot Configuration,,,,
  10. 8,Numlock,"Off,On",,"Selects Power-on state for Numlock"
  11. Form 34 (InsydeH2O Setup Utility),,,,
  12. Peripheral Configuration,,,,
  13. 10,Serial Port A,"Disabled,Auto,Enabled",,"Configure Serial port A using options : [Disable] No Configuration [Enable] User Configuration [Auto] EFI/OS chooses configuration"
  14. 11,Base I/O Address,"2E8,2F8,3E8,3F8",," "
  15. 12,Interrupt,"IRQ3,IRQ4",," "
  16. 15,Infrared Port,"Disabled,Auto,Enabled",,"Configure Infrared port using options : [Disable] No Configuration [Enable] User Configuration [Auto] EFI/OS chooses configuration"
  17. 18,Mode,"CIR,FIR",,"Set the mode for the parallel port using options"
  18. 16,Base I/O Address,"2E8,2F8,3E8,3F8",," "
  19. 17,Interrupt,"IRQ3,IRQ4",," "
  20. 19,DMA Channel,"DMA 1,DMA 2,DMA 3",," "
  21. 20,High Speed,"Normal Speed,High Speed",,"Set FIR to High speed mode or normal speed mode"
  22. 51,Azalia,"Disabled,Enabled,Auto",,"AUTO: Auto detect the Azalia codec. DISABLED: Disable the Azalia controller can be selectable."
  23. 232,Azalia internal HDMI codec,"Disabled,Enabled",,"Enable/Disable internal HDMI codec for Azalia."
  24. 233,Azalia PME Enable,"Disabled,Enabled",,"Enable/Disable PME for Azalia."
  25. 230,Lan,"Disabled,Enabled",,"ENABLE: Enable the Lan controller. DISABLED: Disable the Lan controller can be selectable."
  26. 231,SLP_LAN# Low on DC Power,"Disabled,Enabled",,"Enable/Disable SLP_LAN# Low on DC Power."
  27. Form 35 (InsydeH2O Setup Utility),,,,
  28. IDE Configuration,,,,
  29. 54,IDE Controller,"Disabled,Enabled",,"DISABLED: Disables SATA Controller. ENABLED: Enables SATA Controller."
  30. 721,AHCI Option ROM Support,"Disabled,Enabled",,"If AHCI option ROM set disable ,the system can only detect port 0 to port 3.If AHCI option ROM set enable ,the system can detect all port."
  31. 722,Aggressive LPM Support,"Disabled,Enabled",,"Enable/Disable Support Aggressive Link Power Management(SALP)"
  32. 723,Alternate ID,"Disabled,Enabled",,"Report alternate Device ID"
  33. 724,SATA Port 0 HotPlug,"Disabled,Enabled",,"Enable/Disable SATA Port 0 HotPlug"
  34. 738,Spin-Up Device,"Disabled,Enabled",,"Enable/Disable Supports Staggered Spin-Up (SSS) in AHCI Host Capability Register Bit 27."
  35. 808,SATA Device Type,"Hard Disk Drive,Solid State Drive",,"Identify Solid state Drive or Hard Disk Drive"
  36. 730,Port Multiplier,"Disabled,Enabled",,"Enable/Disable Supports Port Multiplier (PMS) in AHCI Host Capability Register Bit 17."
  37. 725,SATA Port 1 HotPlug,"Disabled,Enabled",,"Enable/Disable SATA Port 1 HotPlug"
  38. 739,Spin-Up Device,"Disabled,Enabled",,"Enable/Disable Supports Staggered Spin-Up (SSS) in AHCI Host Capability Register Bit 27."
  39. 809,SATA Device Type,"Hard Disk Drive,Solid State Drive",,"Identify Solid state Drive or Hard Disk Drive"
  40. 731,Port Multiplier,"Disabled,Enabled",,"Enable/Disable Supports Port Multiplier (PMS) in AHCI Host Capability Register Bit 17."
  41. 726,SATA Port 2 HotPlug,"Disabled,Enabled",,"Enable/Disable SATA Port 2 HotPlug"
  42. 740,Spin-Up Device,"Disabled,Enabled",,"Enable/Disable Supports Staggered Spin-Up (SSS) in AHCI Host Capability Register Bit 27."
  43. 810,SATA Device Type,"Hard Disk Drive,Solid State Drive",,"Identify Solid state Drive or Hard Disk Drive"
  44. 732,Port Multiplier,"Disabled,Enabled",,"Enable/Disable Supports Port Multiplier (PMS) in AHCI Host Capability Register Bit 17."
  45. 727,SATA Port 3 HotPlug,"Disabled,Enabled",,"Enable/Disable SATA Port 3 HotPlug"
  46. 741,Spin-Up Device,"Disabled,Enabled",,"Enable/Disable Supports Staggered Spin-Up (SSS) in AHCI Host Capability Register Bit 27."
  47. 811,SATA Device Type,"Hard Disk Drive,Solid State Drive",,"Identify Solid state Drive or Hard Disk Drive"
  48. 733,Port Multiplier,"Disabled,Enabled",,"Enable/Disable Supports Port Multiplier (PMS) in AHCI Host Capability Register Bit 17."
  49. 728,SATA Port 4 HotPlug,"Disabled,Enabled",,"Enable/Disable SATA Port 4 HotPlug"
  50. 742,Spin-Up Device,"Disabled,Enabled",,"Enable/Disable Supports Staggered Spin-Up (SSS) in AHCI Host Capability Register Bit 27."
  51. 812,SATA Device Type,"Hard Disk Drive,Solid State Drive",,"Identify Solid state Drive or Hard Disk Drive"
  52. 734,Port Multiplier,"Disabled,Enabled",,"Enable/Disable Supports Port Multiplier (PMS) in AHCI Host Capability Register Bit 17."
  53. 736,FIS-Port Multiplier,"Disabled,Enabled",,"Designates This Port Supports FIS-Based Port Multiplier."
  54. 729,SATA Port 5 HotPlug,"Disabled,Enabled",,"Enable/Disable SATA Port 5 HotPlug"
  55. 743,Spin-Up Device,"Disabled,Enabled",,"Enable/Disable Supports Staggered Spin-Up (SSS) in AHCI Host Capability Register Bit 27."
  56. 813,SATA Device Type,"Hard Disk Drive,Solid State Drive",,"Identify Solid state Drive or Hard Disk Drive"
  57. 735,Port Multiplier,"Disabled,Enabled",,"Enable/Disable Supports Port Multiplier (PMS) in AHCI Host Capability Register Bit 17."
  58. 737,FIS-Port Multiplier,"Disabled,Enabled",,"Designates This Port Supports FIS-Based Port Multiplier."
  59. 587,SATA Test Mode,"Disabled,Enable",,"DISABLED: Disables SATA Test Mode. ENABLED: ENABLED SATA Test Mode."
  60. Form 7200 (InsydeH2O Setup Utility),,,,
  61. Software Feature Mask Configuration,,,,
  62. 744,HDD Unlock,"Disabled,Enable",,"If enable, indicates that the HDD password unlock in the OS is enable."
  63. 745,LED Locate,"Disabled,Enable",,"If enable, indicates that the LED/SGPIO hardware is attached and ping to locate feature is enable on the OS."
  64. 746,RAID0,"Disabled,Enable",,"Enable/Disable RAID0 feature."
  65. 747,RAID1,"Disabled,Enable",,"Enable/Disable RAID1 feature."
  66. 748,RAID10,"Disabled,Enable",,"Enable/Disable RAID10 feature."
  67. 749,RAID5,"Disabled,Enable",,"Enable/Disable RAID5 feature."
  68. 750,Intel Rapid Recovery Technology,"Disabled,Enable",,"Enable/Disable Intel Rapid Recovery Technology feature."
  69. 751,OROM UI and BANNER,"Disabled,Enable",,"If enabled, then the OROM UI is shown. Otherwise, no OROM banner or information will be displayed if all disks and RAID volumes are Normal."
  70. 752,IRRT Only on eSATA,"Disabled,Enable",,"If enabled, then only IRRT volumes can span internal and eSATA drivers. If disabled, then any RAID volume can span internal and eSATA drives."
  71. Form 560 (InsydeH2O Setup Utility),,,,
  72. Serial ATA Port 0,,,,
  73. Form 561 (InsydeH2O Setup Utility),,,,
  74. Serial ATA Port 1,,,,
  75. Form 562 (InsydeH2O Setup Utility),,,,
  76. Serial ATA Port 2,,,,
  77. Form 563 (InsydeH2O Setup Utility),,,,
  78. Serial ATA Port 3,,,,
  79. Form 564 (InsydeH2O Setup Utility),,,,
  80. Serial ATA Port 4,,,,
  81. Form 565 (InsydeH2O Setup Utility),,,,
  82. Serial ATA Port 5,,,,
  83. Form 566 (InsydeH2O Setup Utility),,,,
  84. Serial ATA Port 6,,,,
  85. Form 567 (InsydeH2O Setup Utility),,,,
  86. Serial ATA Port 7,,,,
  87. Thermal Configuration,,,,
  88. Form 576 (InsydeH2O Setup Utility),,,,
  89. Platform Thermal Configuration,,,,
  90. 421,Shut Down Temperature,"70 °C,75 °C,80 °C,85 °C,90 °C,100 °C,110 °C,120 °C",,"ACPI Critical Trip Point - the point in which the OS will shut down the system."
  91. 424,Low Fan Speed ,,75,"ACPI Active Trip Point - Value must be between 0(Fan off) - 100(Max Fan speed). This is the speed at which fan will run when fan on low Fan speed."
  92. 423,Low Fan Speed Temperature,"40 °C,45 °C,50 °C,55 °C,60 °C,65 °C,70 °C,75 °C",,"ACPI Active Trip Point - the point in which the OS will turn the processor fan on Low."
  93. 422,High Fan Speed ,,100,"ACPI Active Trip Point - Value must be between 0(Fan off) - 100(Max Fan speed). This is the speed at which fan will run when fan on High Fan speed."
  94. 425,High Fan Speed Temperature,"40 °C,45 °C,50 °C,55 °C,60 °C,65 °C,70 °C,75 °C",,"ACPI Active Trip Point - the point in which the OS will turn the processor fan on High."
  95. 426,Throttle On Temperature,"40 °C,45 °C,50 °C,55 °C,60 °C,65 °C,70 °C,75 °C,80 °C,85 °C,90 °C",,"Set the CPU temperature point of Throttle On"
  96. 427, TC1,,2,"Thermal constant TC1 for the ACPI Passive Cooling ( CPU Throttle On ) Formula."
  97. 428, TC2,,5,"Thermal constant TC2 for the ACPI Passive Cooling ( CPU Throttle On ) Formula."
  98. 429, TSP,,10,"It represents in tenths of a second how often the OS will read the temperature when Passive Cooling is enabled."
  99. 430,ME SMBus Thermal Reporting,"Disabled,Enabled",,"Enable/Disable ME SMBus Thermal Reporting Configuration"
  100. 431,SMBus Buffer Length,"1,2,5,9,10,14,20",,"SMBus Block Read Message Length for EC"
  101. 432,Thermal Reporting EC PEC,"Disabled,Enabled",,"Enable Packet Error Checking(PEC) for SMBus Block Read"
  102. 433,Slots with TS on DIMM's,"No TS on DIMM,Slot DIMM0,Slot DIMM1,Slot DIMM0 and DIMM1",,"Enable Temperature Reporting for Slots with TS on DIMM. NOTE:DIMM0 is the one closer to CPU"
  103. 434,CPU Temp Read,"Disabled,Enabled",,"CPU Temperature Read Enable"
  104. 435,CPU Energy Read,"Disabled,Enabled",,"CPU Energy Read Enable"
  105. 437,PCH Temp Read,"Disabled,Enabled",,"PCH Temperature Read Enable"
  106. 438,TS on DIMM,"Disabled,Enabled",,"Enable/Disable Thermal Sensor on DIMM"
  107. 439,DIMM1 TS READ,"Disabled,Enabled",,"DIMM1 Thermal Sensor Read Enable"
  108. 440,DIMM2 TS READ,"Disabled,Enabled",,"DIMM2 Thermal Sensor Read Enable"
  109. 441,DIMM3 TS READ,"Disabled,Enabled",,"DIMM3 Thermal Sensor Read Enable"
  110. 442,DIMM4 TS READ,"Disabled,Enabled",,"DIMM4 Thermal Sensor Read Enable"
  111. 443,Thermal Device,"Disabled,Enabled",,"Thermal Device (D31F6) Enable/Disable"
  112. 444,Alert Enable Lock,"Disabled,Enabled",,"Lock all Alert Enable settings"
  113. 445,PCH Alert,"Disabled,Enabled",,"PCH Alert pin enable"
  114. 446,DIMM Alert,"Disabled,Enabled",,"DIMM Alert pin enable"
  115. Form 577 (InsydeH2O Setup Utility),,,,
  116. Cpu Thermal Configuration,,,,
  117. 459,DTS,"Disabled,Enabled,Critical Reporting",,"Enables CPU Digitial Thermal Sensor function.Out of Spec: ACPI Thermal Managemnet uses EC reported temperature values and DTS SMM is used to handle Out of Spec condition."
  118. 461,Bi-Directional PROCHOT#,"Disabled,Enabled",,"When a processor thermal sensor trips(either core),the PROCHOT# will be driven.If bi-directional is enable ,external agents can drive PROCHOT# to throttle."
  119. 458,ACPI 3.0 T-States,"Disabled,Enabled",,"Enable/Disable ACPI 3.0 T-States."
  120. Form 37 (InsydeH2O Setup Utility),,,,
  121. Video Configuration,,,,
  122. 486,Special Features,"Disabled,Enabled",,"Enable Switch Graphic Function"
  123. Form 592 (InsydeH2O Setup Utility),,,,
  124. Internal Graphic Device,,,,
  125. 403,Internal Graphics Device,"Auto,Enabled,Disabled",,"Enable IGD "
  126. 404,RC6 (Render Standby),"Disabled,Enabled",,"Graphic Render C-State(RC6) is a technique designed to optimize the average power to the graphics render engine during times of idleness of the render engine."
  127. 522,Deep Render Standby,"Disabled,Enabled",,"Configure Deep Render Standby"
  128. 405,IGD - Gtt Size,"1 MB,2 MB",,"Select the Gtt size"
  129. 407,IGD - Aperture Size,"128 MB,256 MB,512 MB",,"Select the Aperture Size "
  130. 408,IGD - DVMT Pre-Allocated,"0 MB,32 MB,64 MB,96 MB,128 MB,160 MB,192 MB,224 MB,256 MB,288 MB,320 MB,352 MB,384 MB,416 MB,448 MB,480 MB,512 MB,1024 MB",,"Select DVMT5.0 Pre-Allocated(Fixed) Graphics Memory size used by the Internal Graphics Device."
  131. 409,IGD - DVMT Size,"128 MB,256 MB,MAX",," Select the size of DVMT 5.0 that the Internal Graphics Device will use"
  132. 410,IGD - Boot Type,"VBIOS Default,CRT,EFP,LFP,EFP3,EFP2,LFP2",,"Select the Video Device that will be activated during POST"
  133. 411,IGD - Boot Type 2,"Disabled,CRT,EFP,LFP,EFP3,EFP2,LFP2",,"Select Secondary Display Device"
  134. 410,IGD - Boot Type,"VBT Default,CRT,LFP,EFP,EFP2,EFP3",,"Select the Video Device that will be activated during POST"
  135. 411,IGD - Boot Type 2,"Disabled,CRT,LFP,EFP,EFP2,EFP3",,"Select Secondary Display Device"
  136. 412,IGD - LCD Panel Type,"640x480 LVDS,800x600 LVDS,1024x768 LVDS1,1280x1024 LVDS,1400x1050 LVDS1,1400x1050 LVDS2,1600x1200 LVDS,1366x768 LVDS,1680x1050 LVDS,1920x1200 LVDS,1440x900 LVDS,1600x900 LVDS,1024x768 LVDS2,1280x800 LVDS,1920x1080 LVDS,2048x1536 LVDS",,"Select the Panel used by the Internal Graphics Device by selecting the appropriate setup item"
  137. 413,Backlight Control,"PWM Inverted,PWM Normal,GMBUS Inverted,GMBUS Normal",,"Backlight Control Setting"
  138. 414,IGD - TV,"VBIOS Default,NTSC,PAL,SECAM",,"Select the TV standard used by the Internal Graphics Device"
  139. 415,IGD - Gfx Low Power Mode,"Disabled,Enabled",,"This option is applicable for SFF only."
  140. 416,Active LFP,"No LVDS,Int-LVDS,SDVO LVDS,eDP,VBIOS Default",,"Selects the Active LFP Configuration"
  141. 417,Panel Color Depth,"18 Bit,24 Bit",,"Select the LFP Panel Color Depth"
  142. Form 593 (InsydeH2O Setup Utility),,,,
  143. Pci Express Graphic,,,,
  144. 832,PCIE Reset Delay,"Disabled,50 ms,100 ms,200 ms,300 ms",,"Delay for PCIE reset. Set to longer time if PEG doesn't work."
  145. 418,ASPM,"Disabled,L0s,L1,L0sL1,Auto",,"Control ASPM support for the PEG Device."
  146. 518,PEG0 - Gen X,"Auto,Gen1,Gen2,Gen3",,"Configure PEG0 B0:D1:F0 Gen1-Gen2"
  147. 519,PEG1 - Gen X,"Auto,Gen1,Gen2,Gen3",,"Configure PEG0 B0:D1:F1 Gen1-Gen2"
  148. 520,PEG2 - Gen X,"Auto,Gen1,Gen2,Gen3",,"Configure PEG0 B0:D1:F2 Gen1-Gen2"
  149. 521,PEG3 - Gen X,"Auto,Gen1,Gen2,Gen3",,"Configure PEG0 B0:D6:F0 Gen1-Gen2"
  150. 419,ASPM L0s,"Root Port Only,Endpoint Port Only,Root&Endpoint Ports",,"Enable PCIe ASPM L0s."
  151. 406,Always Enable PEG,"Enabled,Disabled",,"To enable the PEG"
  152. 487,PowerXpress Setting,"Muxless Fixed Scheme Only,Muxless Dynamic Scheme Only,Muxless Fixed and Dynamic Scheme,Full dGPU PowerOff Dynamic Scheme,Fixed and Full dGPU PowerOff Dynamic Scheme",,"Setting Mux or Muxless"
  153. Form 594 (InsydeH2O Setup Utility),,,,
  154. SA DMI Configuration,,,,
  155. 513,DMI Link ASPM Control,"Disabled,L0s,L1,L0sL1,Auto",,"The control of Active State Power Management on NB side of the DMI Link."
  156. 514,DMI Extended Synch Control,"Disabled,Enabled",,"Enable/Disable DMI Extended Synchronization"
  157. 510,DMI Vc1 Control,"Disabled,Enabled",,"Enable/Disable DMI Vc1"
  158. 511,DMI Vcp Control,"Disabled,Enabled",,"Enable/Disable DMI Vcp"
  159. 512,DMI Vcm Control,"Disabled,Enabled",,"Enable/Disable DMI Vcm"
  160. 516,DMI Gen 2,"Disabled,Enabled,Auto",,"Enable/Disable DMI Gen 2"
  161. Form 38 (InsydeH2O Setup Utility),,,,
  162. USB Configuration,,,,
  163. 72,USB Legacy,"Disabled,Enabled",,"USB devices boot and access in DOS"
  164. 825,XHCI Pre-Boot Driver,"Disabled,Enabled",,"Enable/Disable XHCI Pre-Boot Driver support"
  165. 234,XHCI,"Disabled,Enabled,Auto,Smart Auto",,"Configure XHCI Mode"
  166. 234,XHCI,"Disabled,Enabled,Auto",,"Configure XHCI Mode"
  167. 826,HS Port Switch 1,"Disabled,Enabled",,"Allows for HS port switching between XHCI and EHCI. If disable, port is routed to EHCI. IF HS port is routed to XHCI the corresponding SS port is enable"
  168. 827,HS Port Switch 2,"Disabled,Enabled",,"Allows for HS port switching between XHCI and EHCI. If disable, port is routed to EHCI. IF HS port is routed to XHCI the corresponding SS port is enable"
  169. 828,HS Port Switch 3,"Disabled,Enabled",,"Allows for HS port switching between XHCI and EHCI. If disable, port is routed to EHCI. IF HS port is routed to XHCI the corresponding SS port is enable"
  170. 829,HS Port Switch 4,"Disabled,Enabled",,"Allows for HS port switching between XHCI and EHCI. If disable, port is routed to EHCI. IF HS port is routed to XHCI the corresponding SS port is enable"
  171. 830,XHCI Streams,"Disabled,Enabled",,"Enable/Disable XHCI Streams"
  172. 235,EHCI 1,"Disabled,Enabled",,"Enable/Disable EHCI 1"
  173. 236,EHCI 2,"Disabled,Enabled",,"Enable/Disable EHCI 2"
  174. 239,Pre-Port Control,"Disabled,Enabled",,"Enable/Disable the Per-Port Disable Control Override"
  175. 240,Usb Port0,"Disabled,Enabled",,"Enable/Disable Port 0"
  176. 241,Usb Port1,"Disabled,Enabled",,"Enable/Disable Port 1"
  177. 242,Usb Port2,"Disabled,Enabled",,"Enable/Disable Port 2"
  178. 243,Usb Port3,"Disabled,Enabled",,"Enable/Disable Port 3"
  179. 244,Usb Port4,"Disabled,Enabled",,"Enable/Disable Port 4"
  180. 245,Usb Port5,"Disabled,Enabled",,"Enable/Disable Port 5"
  181. 246,Usb Port6,"Disabled,Enabled",,"Enable/Disable Port 6"
  182. 247,Usb Port7,"Disabled,Enabled",,"Enable/Disable Port 7"
  183. 248,Usb Port8,"Disabled,Enabled",,"Enable/Disable Port 8"
  184. 249,Usb Port9,"Disabled,Enabled",,"Enable/Disable Port 9"
  185. 250,Usb Port10,"Disabled,Enabled",,"Enable/Disable Port 10"
  186. 251,Usb Port11,"Disabled,Enabled",,"Enable/Disable Port 11"
  187. 252,Usb Port12,"Disabled,Enabled",,"Enable/Disable Port 12"
  188. 253,Usb Port13,"Disabled,Enabled",,"Enable/Disable Port 13"
  189. 237,USB RMH Mode,"Disabled,Enabled",,"PCH USB Rate Matching Hubs mode"
  190. 238,USB RMH1 Enable,"Disabled,Enabled",,"Enable / Disable USB Rate Matching Hubs 1"
  191. Form 39 (InsydeH2O Setup Utility),,,,
  192. Chipset Configuration,,,,
  193. Setup Warning:,,,,
  194. Setting items on this screen to incorrect values,,,,
  195. may cause your system to malfunction!,,,,
  196. 488,CRID,"Disabled,Enabled",,"Enable / Disable : Compatible Revision ID ( CRID ) / Stepping Revision ID ( SRID )."
  197. 489,Port 80h Cycles,"LPC BUS,PCI BUS",,"Control where the port 80h cycles are sent."
  198. 490,VT-d,"Disabled,Enabled",,"Check to enable VT-d function on MCH"
  199. 472,Interrupt Remapping,"Disabled,Enabled",,"Enable/Disable Interrupt Remapping function"
  200. 779,Pass-Through DMA,"Disabled,Enabled",,"Enable/Disable Pass-Through DMA"
  201. 275,CHAP DEVICE,"Disabled,Enabled",,"Enable/Disable CHAP device (Bus 0, Dev 7)."
  202. 276,DEVICE 4,"Disabled,Enabled",,"Enable/Disable Thermal device (Bus 0, Dev 4)."
  203. 277,Scrambler,"Disabled,Enabled",,"Enable/Disable scrambling."
  204. 491,Memory Frequency,"Auto,1067,1333,1600,1867,2133",,"Memory Frequency Selections in Mhz"
  205. 492,NMode Support,"Auto,1N Mode,2N Mode",,"NMode Support Option"
  206. 493,Me Fw Image Re-Flash,"Disabled,Enabled",,"Enable /Disable Me Fw Image Re-Flash function"
  207. 494,After G3 On,"S0,S5,Last State",,"Specify what state to go to when power is re-applied after a power failure (G3 state)."
  208. 495,Board Capability,"SUS_PWR_DN_ACK,DeepSx",,"Board Capability - SUS_PWR_DN_ACK -> Send Disable to PCH. DeepSx -> Show DeepSx Policy."
  209. 496,DeepSx Power Policies,"Disable,Enable In S5,Enable In S4-S5,Enable In S3-S4-S5",,"Configure The DeepSx Mode Configuration."
  210. 805,GPIO Lockdown,"Disabled,Enabled",,"Enable/Disable GPIO Lockdown feature. GPIO registers will be READ-ONLY, when enable GPIO Lockdown."
  211. 835,RTC Lock,"Disabled,Enabled",,"Enable will lock bytes 38h-3Fh in the lower/upper 128-byte bank of RTC RAM."
  212. 831,IFR Update,"Disabled,Enabled",,"Independent FW Recovery. Note **OEM** This is only for OEM to opt-out from IFR Update but not the option for end user."
  213. 871,Max TOLUD,"Dynamic,1 GB,1.25 GB,1.5 GB,1.75 GB,2 GB,2.25 GB,2.5 GB,2.75 GB,3 GB,3.25 GB",,"Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD automatically based on largest MMIO length of installed graphic controller"
  214. 874,SATA PORT 0 Time Out(MS),,0,"Add Delay time for SATA PORT 0, Time Out 0: no delay, Time Out > 0: Max delay time equals Time out, the recommend time is: 1 to 10 MS."
  215. Form 40 (InsydeH2O Setup Utility),,,,
  216. ACPI Table/Features Control,,,,
  217. 83,FACP - RTC S4 Wakeup,"Disabled,Enabled",,"Value only for ACPI. Enable/Disable for S4 Wakeup from RTC"
  218. 84,APIC - IO APIC Mode,"Disabled,Enabled",,"This item is valid only for WIN2k and WINXP.Also,a fresh install of the OS must occur when APIC Mode is desired.Test the IO ACPI by setting item to Enable.The APIC Table will then be pointed to by the RSDT,the Local APIC will be initialized,and the proper enable bits will be set in ICH4M"
  219. 806,TCO WatchDog Support,"Disabled,Enabled",,"Enable/Disable TCO WatchDog Support"
  220. 807,WatchDog ACPI Table,"Disabled,Enabled",,"Enable/Disable to support WatchDog ACPI Table (WDAT)"
  221. Form 48 (InsydeH2O Setup Utility),,,,
  222. PCI Express Configuration,,,,
  223. 289,PCI Express Clock Gating,"Disabled,Enabled",,"PCI Express Clock Gating Enable/Disable for each root port"
  224. 288,DMI Link ASPM Control,"Disabled,Enabled",,"The control of Active State Power Management on SB side of the DMI Link."
  225. 515,DMI Extended Synch Control,"Disabled,Enabled",,"Enable/Disable DMI Extended Synchronization"
  226. Form 768 (InsydeH2O Setup Utility),,,,
  227. PCI Express Root Port 1,,,,
  228. 290,PCI Express Root Port 1,"Disabled,Enabled",,"Control the PCI Express Root Port."
  229. 298,Automatic ASPM,"Disabled,L0s,L1,L0sL1,Auto",,"Automatically enable ASPM based on reported capabilities and known issues"
  230. 306,URR,"Disabled,Enabled",,"PCI Express Unsupported Request Reporting Enable/Disable."
  231. 314,FER,"Disabled,Enabled",,"PCI Express Device Fatal Error Reporting Enable/Disable."
  232. 322,NFER,"Disabled,Enabled",,"PCI Express Device Non-Fatal Error Reporting Enable/Disable."
  233. 330,CER,"Disabled,Enabled",,"PCI Express Device Correctable Error Reporting Enable/Disable."
  234. 338,CTO,"Default,16-55 ms,65-210 ms,260-900 ms,1-3.5 ms,Disabled",,"PCI Express Completion Timer TO Enable/Disable"
  235. 354,SEFE,"Disabled,Enabled",,"Root PCI Express System Error on Fatal Error Enable/Disable."
  236. 362,SENFE,"Disabled,Enabled",,"Root PCI Express System Error on Non-Fatal Error Enable/Disable."
  237. 370,SECE,"Disabled,Enabled",,"Root PCI Express System Error on Correctable Error Enable/Disable."
  238. 346,PME Interrupt,"Disabled,Enabled",,"Root PCI Express PME Interrupt Enable/Disable."
  239. 378,PME SCI,"Disabled,Enabled",,"PCI Express PME SCI Enable/Disable."
  240. 386,Hot Plug,"Disabled,Enabled",,"PCI Express Hot Plug Enable/Disable."
  241. 394,PCIe Speed,"Auto,Gen1,Gen2",,"Configure PCIe Speed"
  242. Form 769 (InsydeH2O Setup Utility),,,,
  243. PCI Express Root Port 2,,,,
  244. 291,PCI Express Root Port 2,"Disabled,Enabled",,"Control the PCI Express Root Port."
  245. 299,Automatic ASPM,"Disabled,L0s,L1,L0sL1,Auto",,"Automatically enable ASPM based on reported capabilities and known issues"
  246. 307,URR,"Disabled,Enabled",,"PCI Express Unsupported Request Reporting Enable/Disable."
  247. 315,FER,"Disabled,Enabled",,"PCI Express Device Fatal Error Reporting Enable/Disable."
  248. 323,NFER,"Disabled,Enabled",,"PCI Express Device Non-Fatal Error Reporting Enable/Disable."
  249. 331,CER,"Disabled,Enabled",,"PCI Express Device Correctable Error Reporting Enable/Disable."
  250. 339,CTO,"Default,16-55 ms,65-210 ms,260-900 ms,1-3.5 ms,Disabled",,"PCI Express Completion Timer TO Enable/Disable"
  251. 355,SEFE,"Disabled,Enabled",,"Root PCI Express System Error on Fatal Error Enable/Disable."
  252. 363,SENFE,"Disabled,Enabled",,"Root PCI Express System Error on Non-Fatal Error Enable/Disable."
  253. 371,SECE,"Disabled,Enabled",,"Root PCI Express System Error on Correctable Error Enable/Disable."
  254. 347,PME Interrupt,"Disabled,Enabled",,"Root PCI Express PME Interrupt Enable/Disable."
  255. 379,PME SCI,"Disabled,Enabled",,"PCI Express PME SCI Enable/Disable."
  256. 387,Hot Plug,"Disabled,Enabled",,"PCI Express Hot Plug Enable/Disable."
  257. 395,PCIe Speed,"Auto,Gen1,Gen2",,"Configure PCIe Speed"
  258. Form 770 (InsydeH2O Setup Utility),,,,
  259. PCI Express Root Port 3,,,,
  260. 292,PCI Express Root Port 3,"Disabled,Enabled",,"Control the PCI Express Root Port."
  261. 300,Automatic ASPM,"Disabled,L0s,L1,L0sL1,Auto",,"Automatically enable ASPM based on reported capabilities and known issues"
  262. 308,URR,"Disabled,Enabled",,"PCI Express Unsupported Request Reporting Enable/Disable."
  263. 316,FER,"Disabled,Enabled",,"PCI Express Device Fatal Error Reporting Enable/Disable."
  264. 324,NFER,"Disabled,Enabled",,"PCI Express Device Non-Fatal Error Reporting Enable/Disable."
  265. 332,CER,"Disabled,Enabled",,"PCI Express Device Correctable Error Reporting Enable/Disable."
  266. 340,CTO,"Default,16-55 ms,65-210 ms,260-900 ms,1-3.5 ms,Disabled",,"PCI Express Completion Timer TO Enable/Disable"
  267. 356,SEFE,"Disabled,Enabled",,"Root PCI Express System Error on Fatal Error Enable/Disable."
  268. 364,SENFE,"Disabled,Enabled",,"Root PCI Express System Error on Non-Fatal Error Enable/Disable."
  269. 372,SECE,"Disabled,Enabled",,"Root PCI Express System Error on Correctable Error Enable/Disable."
  270. 348,PME Interrupt,"Disabled,Enabled",,"Root PCI Express PME Interrupt Enable/Disable."
  271. 380,PME SCI,"Disabled,Enabled",,"PCI Express PME SCI Enable/Disable."
  272. 388,Hot Plug,"Disabled,Enabled",,"PCI Express Hot Plug Enable/Disable."
  273. 396,PCIe Speed,"Auto,Gen1,Gen2",,"Configure PCIe Speed"
  274. Form 771 (InsydeH2O Setup Utility),,,,
  275. PCI Express Root Port 4,,,,
  276. 293,PCI Express Root Port 4,"Disabled,Enabled",,"Control the PCI Express Root Port."
  277. 301,Automatic ASPM,"Disabled,L0s,L1,L0sL1,Auto",,"Automatically enable ASPM based on reported capabilities and known issues"
  278. 309,URR,"Disabled,Enabled",,"PCI Express Unsupported Request Reporting Enable/Disable."
  279. 317,FER,"Disabled,Enabled",,"PCI Express Device Fatal Error Reporting Enable/Disable."
  280. 325,NFER,"Disabled,Enabled",,"PCI Express Device Non-Fatal Error Reporting Enable/Disable."
  281. 333,CER,"Disabled,Enabled",,"PCI Express Device Correctable Error Reporting Enable/Disable."
  282. 341,CTO,"Default,16-55 ms,65-210 ms,260-900 ms,1-3.5 ms,Disabled",,"PCI Express Completion Timer TO Enable/Disable"
  283. 357,SEFE,"Disabled,Enabled",,"Root PCI Express System Error on Fatal Error Enable/Disable."
  284. 365,SENFE,"Disabled,Enabled",,"Root PCI Express System Error on Non-Fatal Error Enable/Disable."
  285. 373,SECE,"Disabled,Enabled",,"Root PCI Express System Error on Correctable Error Enable/Disable."
  286. 349,PME Interrupt,"Disabled,Enabled",,"Root PCI Express PME Interrupt Enable/Disable."
  287. 381,PME SCI,"Disabled,Enabled",,"PCI Express PME SCI Enable/Disable."
  288. 389,Hot Plug,"Disabled,Enabled",,"PCI Express Hot Plug Enable/Disable."
  289. 397,PCIe Speed,"Auto,Gen1,Gen2",,"Configure PCIe Speed"
  290. Form 772 (InsydeH2O Setup Utility),,,,
  291. PCI Express Root Port 5,,,,
  292. 294,PCI Express Root Port 5,"Disabled,Enabled",,"Control the PCI Express Root Port."
  293. 302,Automatic ASPM,"Disabled,L0s,L1,L0sL1,Auto",,"Automatically enable ASPM based on reported capabilities and known issues"
  294. 310,URR,"Disabled,Enabled",,"PCI Express Unsupported Request Reporting Enable/Disable."
  295. 318,FER,"Disabled,Enabled",,"PCI Express Device Fatal Error Reporting Enable/Disable."
  296. 326,NFER,"Disabled,Enabled",,"PCI Express Device Non-Fatal Error Reporting Enable/Disable."
  297. 334,CER,"Disabled,Enabled",,"PCI Express Device Correctable Error Reporting Enable/Disable."
  298. 342,CTO,"Default,16-55 ms,65-210 ms,260-900 ms,1-3.5 ms,Disabled",,"PCI Express Completion Timer TO Enable/Disable"
  299. 358,SEFE,"Disabled,Enabled",,"Root PCI Express System Error on Fatal Error Enable/Disable."
  300. 366,SENFE,"Disabled,Enabled",,"Root PCI Express System Error on Non-Fatal Error Enable/Disable."
  301. 374,SECE,"Disabled,Enabled",,"Root PCI Express System Error on Correctable Error Enable/Disable."
  302. 350,PME Interrupt,"Disabled,Enabled",,"Root PCI Express PME Interrupt Enable/Disable."
  303. 382,PME SCI,"Disabled,Enabled",,"PCI Express PME SCI Enable/Disable."
  304. 390,Hot Plug,"Disabled,Enabled",,"PCI Express Hot Plug Enable/Disable."
  305. 398,PCIe Speed,"Auto,Gen1,Gen2",,"Configure PCIe Speed"
  306. Form 773 (InsydeH2O Setup Utility),,,,
  307. PCI Express Root Port 6,,,,
  308. 295,PCI Express Root Port 6,"Disabled,Enabled",,"Control the PCI Express Root Port."
  309. 303,Automatic ASPM,"Disabled,L0s,L1,L0sL1,Auto",,"Automatically enable ASPM based on reported capabilities and known issues"
  310. 311,URR,"Disabled,Enabled",,"PCI Express Unsupported Request Reporting Enable/Disable."
  311. 319,FER,"Disabled,Enabled",,"PCI Express Device Fatal Error Reporting Enable/Disable."
  312. 327,NFER,"Disabled,Enabled",,"PCI Express Device Non-Fatal Error Reporting Enable/Disable."
  313. 335,CER,"Disabled,Enabled",,"PCI Express Device Correctable Error Reporting Enable/Disable."
  314. 343,CTO,"Default,16-55 ms,65-210 ms,260-900 ms,1-3.5 ms,Disabled",,"PCI Express Completion Timer TO Enable/Disable"
  315. 359,SEFE,"Disabled,Enabled",,"Root PCI Express System Error on Fatal Error Enable/Disable."
  316. 367,SENFE,"Disabled,Enabled",,"Root PCI Express System Error on Non-Fatal Error Enable/Disable."
  317. 375,SECE,"Disabled,Enabled",,"Root PCI Express System Error on Correctable Error Enable/Disable."
  318. 351,PME Interrupt,"Disabled,Enabled",,"Root PCI Express PME Interrupt Enable/Disable."
  319. 383,PME SCI,"Disabled,Enabled",,"PCI Express PME SCI Enable/Disable."
  320. 391,Hot Plug,"Disabled,Enabled",,"PCI Express Hot Plug Enable/Disable."
  321. 399,PCIe Speed,"Auto,Gen1,Gen2",,"Configure PCIe Speed"
  322. Form 774 (InsydeH2O Setup Utility),,,,
  323. PCI Express Root Port 7,,,,
  324. 296,PCI Express Root Port 7,"Disabled,Enabled",,"Control the PCI Express Root Port."
  325. 304,Automatic ASPM,"Disabled,L0s,L1,L0sL1,Auto",,"Automatically enable ASPM based on reported capabilities and known issues"
  326. 312,URR,"Disabled,Enabled",,"PCI Express Unsupported Request Reporting Enable/Disable."
  327. 320,FER,"Disabled,Enabled",,"PCI Express Device Fatal Error Reporting Enable/Disable."
  328. 328,NFER,"Disabled,Enabled",,"PCI Express Device Non-Fatal Error Reporting Enable/Disable."
  329. 336,CER,"Disabled,Enabled",,"PCI Express Device Correctable Error Reporting Enable/Disable."
  330. 344,CTO,"Default,16-55 ms,65-210 ms,260-900 ms,1-3.5 ms,Disabled",,"PCI Express Completion Timer TO Enable/Disable"
  331. 360,SEFE,"Disabled,Enabled",,"Root PCI Express System Error on Fatal Error Enable/Disable."
  332. 368,SENFE,"Disabled,Enabled",,"Root PCI Express System Error on Non-Fatal Error Enable/Disable."
  333. 376,SECE,"Disabled,Enabled",,"Root PCI Express System Error on Correctable Error Enable/Disable."
  334. 352,PME Interrupt,"Disabled,Enabled",,"Root PCI Express PME Interrupt Enable/Disable."
  335. 384,PME SCI,"Disabled,Enabled",,"PCI Express PME SCI Enable/Disable."
  336. 392,Hot Plug,"Disabled,Enabled",,"PCI Express Hot Plug Enable/Disable."
  337. 400,PCIe Speed,"Auto,Gen1,Gen2",,"Configure PCIe Speed"
  338. Form 775 (InsydeH2O Setup Utility),,,,
  339. PCI Express Root Port 8,,,,
  340. 297,PCI Express Root Port 8,"Disabled,Enabled",,"Control the PCI Express Root Port."
  341. 305,Automatic ASPM,"Disabled,L0s,L1,L0sL1,Auto",,"Automatically enable ASPM based on reported capabilities and known issues"
  342. 313,URR,"Disabled,Enabled",,"PCI Express Unsupported Request Reporting Enable/Disable."
  343. 321,FER,"Disabled,Enabled",,"PCI Express Device Fatal Error Reporting Enable/Disable."
  344. 329,NFER,"Disabled,Enabled",,"PCI Express Device Non-Fatal Error Reporting Enable/Disable."
  345. 337,CER,"Disabled,Enabled",,"PCI Express Device Correctable Error Reporting Enable/Disable."
  346. 345,CTO,"Default,16-55 ms,65-210 ms,260-900 ms,1-3.5 ms,Disabled",,"PCI Express Completion Timer TO Enable/Disable"
  347. 361,SEFE,"Disabled,Enabled",,"Root PCI Express System Error on Fatal Error Enable/Disable."
  348. 369,SENFE,"Disabled,Enabled",,"Root PCI Express System Error on Non-Fatal Error Enable/Disable."
  349. 377,SECE,"Disabled,Enabled",,"Root PCI Express System Error on Correctable Error Enable/Disable."
  350. 353,PME Interrupt,"Disabled,Enabled",,"Root PCI Express PME Interrupt Enable/Disable."
  351. 385,PME SCI,"Disabled,Enabled",,"PCI Express PME SCI Enable/Disable."
  352. 393,Hot Plug,"Disabled,Enabled",,"PCI Express Hot Plug Enable/Disable."
  353. 401,PCIe Speed,"Auto,Gen1,Gen2",,"Configure PCIe Speed"
  354. Form 7360 (InsydeH2O Setup Utility),,,,
  355. Extended ICC,,,,
  356. 786,Use WatchDog Timer For ICC,"Disabled,Enable",,"Enable Watchdog Timer operation for ICC. If enabled, Watchdog Timer will be started after ICC-related changes. This timer detects platform instability caused by wrong clock settings."
  357. 787,Turn Off Unused PCI/PCIe Clocks,"Disabled,Enable",,"Disable: all clocks turned on. Enable: clocks for empty PCI/PCIe slots will be turned off to save power. Platform must be powered off for changes to take effect."
  358. 788,Lock ICC Registers,"All registers,Static registers only",,"All registers: all ICC registers will be locked. Static only: only static ICC registers will be locked."
  359. Form 13840 (InsydeH2O Setup Utility),,,,
  360. DPTF Configuration,,,,
  361. 819,DPTF,"Disabled,Enabled",,"Enable / Disable DPTF"
  362. 822,LPM,"Disabled,Enabled",,"Enable / Disable LPM"
  363. 823,CLPM,"Disabled,Enabled,Application Specific LPM,Use the LPM setting as requested by the OS",,"Select Current Low Power Mode"
  364. 824,cTDP,"Disabled,Enabled",,"Enable / Disable cTDP"
  365. 820,Processor Thermal Device,"Disabled,SA Thermal Device,CPU Thermal Device",,"Configure Processor Thermal Device"
  366. 821,PCH Thermal Device,"Disabled,Enabled",,"Configure PCH Thermal Device"
  367. Form 7680 (InsydeH2O Setup Utility),,,,
  368. Intel(R) Smart Connect Technology Configuration,,,,
  369. 814,ISCT Configuration,"Enabled,Disabled",,"Enable/Disable Intel(R) Smart Connect Technology Configuration. "
  370. 815,ISCT Notification Control,"Enabled,Disabled",,"Enable/Disable Intel(R) Smart Connect Technology Notification Control. "
  371. 816,ISCT WLAN Power Control,"Enabled,Disabled",,"Enable/Disable Intel(R) Smart Connect Technology WLAN Power Control. "
  372. 817,ISCT WWLAN Power Control,"Enabled,Disabled",,"Enable/Disable Intel(R) Smart Connect Technology WWLAN Power Control. "
  373. 818,AOAC Wake Up from EC Control,"Enabled,Disabled",,"Enable/Disable AOAC Wake up from EC/RTC. "
  374. FormSet Power (A04A27F4-DF00-4D42-B552-39511302113D),,,,
  375. Form 1 (Power),,,,
  376. 134,Wake on PME,"Disabled,Enabled",,"Determines the action taken when the system power is off and a PCI Power Management Enable wake up event occurs."
  377. 135,Wake on Modem Ring,"Disabled,Enabled",,"Determines the action taken when the system power is off and a modem connected to the serial port is ringing."
  378. 136,Auto Wake on S5,"Disabled,By Every Day,By Day of Month",,"Auto wake on S5, By Day of Month or Fixed time of every day"
  379. 140, Day of Month,,1,"This is the help for the day field. Valid range is from 1 to 31. (Error checking will be done against month/day/year combinations that are not supported. REDUCE/INCREASE : F5/F6."
  380. 497,Wake on LAN,"Disabled,Enabled",,"ENABLE/DISABLED integrated LAN to wake the system."
  381. 873,S5 long run test,"Disabled,Enabled",,"Enable : force to enable RTC S5 wake up, even if OS disables it. Support ipwrtest to do RTC S5 wakeup."
  382. Form 64 (InsydeH2O Setup Utility),,,,
  383. Advanced CPU Control,,,,
  384. 500,AES,"Enable,Disable",,"AES(Advanced Encryption Standards)."
  385. 447,P-States(IST),"Disabled,Enabled",,"Enable processor performance states(P-States)."
  386. 448,Boot Performance Mode,"Max Battery,Max Performance",,"Select the performance state that BIOS will set before OS handoff."
  387. 449,Active Processor Cores,"All Core,1 Core,2 Core,3 Core",,"Number of Cores to enable in each processor package"
  388. 450,HT Support,"Auto,Disabled",,"Auto/Disable Hyper-Threading"
  389. 451,Use XD Capability,"Disabled,Enabled",,"XD is a CPU feature for prevent malicious buffer overflow attacks (a supporting OS is necessary)"
  390. 452,VT Support,"Enabled,Disabled",,"Virtualization Technology Enable/Disable."
  391. 453,Hardware Prefetcher,"Disabled,Enabled",,"Enable/Disable MLC (Mid Level Cache, L2 Cache) Streamer Prefetcher."
  392. 454,AdjacentCacheLine Prefet,"Disabled,Enabled",,"Enable/Disable MLC Spatail Prefetcher. (Adjacent Cache Line Prefetch)"
  393. 455,Max CPUID Value Limit,"Disabled,Enabled",,"Limit CPUID max value to 3 (if max CPUID value > 3). This setting is useless for windows OS."
  394. 464,xAPIC Mode,"Disabled,Enabled",,"Enable / Disable xAPIC Mode"
  395. 456,Local x2APIC,"Disabled,Enabled",,"Enable/Disable Local x2APIC. Some OS do not support this feature."
  396. 465,C-States,"Disabled,Enabled",,"Enable processor idle power saving states(C-States)."
  397. 466,Enhanced C-States,"Disabled,Enabled",,"Enable P-State transitions to occur in combination with C-States."
  398. 467,Enable C3,"Disabled,Enabled",,"Enable / Disable C3"
  399. 468,Enable C6,"Disabled,Enabled",,"Enable C6"
  400. 469,Enable C7,"Disabled,Enabled",,"Enable / Disable C7"
  401. 834,Enable C7s,"Disabled,Enabled",,"Enable / Disable C7s state. If enabled, BIOS will reports C7s instead of C7 to OS."
  402. 833,Enable C7r,"Disabled,Enabled",,"Enable / Disable C7r state"
  403. 470,C-State Auto Demotion,"Disabled,C1 only,C3 only,C1 and C3",,"Enable / Disable C-State Auto Demotion"
  404. 517,C-State Auto Un-demotion,"Disabled,C1 Only,C3 Only,C1 and C3",,"Enable / Disable C-State Auto Un-demotion"
  405. 505,EC Turbo Control Mode,"Disabled,Enabled",,"Enable/Disable EC Turbo Control Mode"
  406. 506,AC Brick Capacity,"90W AC Brick,65W AC Brick,75W AC Brick",,"Specify the AC Brick capacity"
  407. 507,EC Polling Period,,1,"Count 1 to 255 for a range of 10ms to 2.55 seconds (1 count = 10ms)"
  408. 508,EC Guard Band Value,,0,"Count 1 to 20 for a range of 1 watt to 20 watts"
  409. 509,EC Alogrithm Selection,,1,"Count 1 to 10 for Algorithm Selection"
  410. 457,Turbo Mode,"Disabled,Enabled",,"Enable processor Turbo Mode(requires EMTTM enabled too)."
  411. 700,Energy Efficient P-state,"Disabled,Enabled",,"Enable/Disable Energy Efficient P-state feature."
  412. 701,Turbo PWR Limit MSR Lock,"Disabled,Enabled",,"Enable/Disable locking of turbo settings."
  413. 702,Override Turbo Settings,"Disabled,Enabled",,"Enable/disable Override of various turbo settings."
  414. 703,Long Duration PWR Limit,,0,"Turbo Mode Power Limit 1 in Watts. The value may vary from 0 to Fused Value. Value 0 will programmed to fused value. Greater than fused TDP value will not be programmed."
  415. 705,Long Duration TimeWindow,,28,"Power Limit 1 Time value in seconds. Indicates the time window over which TDP value should be maintained. Value 0 will programmed to fused value."
  416. 707,Short Duration PWR Limit,"Disabled,Enabled",,"Enable/Disable Short Duration Power Limit (Power Limit 2)"
  417. 708,Short Duration PWR Limit,,0,"Turbo Mode Power Limit 2 value in Watts. Value 0 will programmed to 1.25*TDP."
  418. 710,Pri Plane Current Limit,,0,"Primary Plane refers to the IA Core power rail. This value represents the Maximum instantaneous current allowed at any given time. The value is represented in 1/8 A increments. 0 means AUTO."
  419. 712,Sec Plane Current Limit,,0,"Secondary Plane refers to the Integrated Graphics power rail. This value represents the Maximum instantaneous current allowed at any given time. The value is represented in 1/8 A increments. 0 means AUTO."
  420. Form 65 (InsydeH2O Setup Utility),,,,
  421. Platform Power Management,,,,
  422. 498,PCI Clock Run,"Disabled,Enabled",,"If Enabled,the CLKRUN# Logic will stop the PCI Clocks"
  423. Form 66 (InsydeH2O Setup Utility),,,,
  424. Config TDP Configurations,,,,
  425. 838,Configurable TDP BOOT Mode,"Nominal,Up,Down",,"Configure TDP Mode as Nominal / Up / Down"
  426. 844,Configurable TDP Lock,"Disabled,Enabled",,"Configure TDP Mode Lock sets the Lock bits on TURBO_ACTIVATION_RATIO and CONFIG_TDP_CONTROL."
  427. 845,Custom Configurable TDP,"Disabled,Enabled",,"Custom Configurable TDP Settings"
  428. Form 67 (InsydeH2O Setup Utility),,,,
  429. Custom Configurable TDP Setting,,,,
  430. 846,Custom ConfigTDP Count,,1,"Configure the number of custom ConfigTDP levels required. Note: this must be 1 if Configurable TDP Lock is enabled."
  431. 847,Custom ConfigTDP Boot Index,,0,"Configure the Index value of Custom ConfigTDP selected by default for boot. Needs to be configured with valid values from 0 to Max Custom ConfigTdp count. Note: this must be 0 if Configurable TDP Lock is enabled."
  432. Custom Setting 0,,,,
  433. 848,Long Term Power Limit,,40,"Long Term Power Limit (aka Power Limit 1) value in Watts. XE SKU: any value can be programmed. Overclocking SKU: Value must be between Max and Min Power Limits. Other SKUs: This Value must be between Min Power Limit and TDP Limit. If Value is 0, BIOS will program TDP value."
  434. 850,Short Term Power Limit,,50,"Short Term Power Limit (aka Power Limit 2) value in Watts. If the value is 0, BIOS will program this value as 1.25*TDP. Processor applies control policies such that the package power does not exceed this limit"
  435. 852,Long Term Time Window,,28,"Long Term Time Window (aka Power Limit 1 Time) value in seconds. The value may vary from 0 to 128. If the value is 0, default values will be programmed (28 sec for Mobile and 1 sec from Desktop). Indicates the time window over which TDP value should be maintained."
  436. 853,ConfigTDP Turbo Activation Ratio,,20,"Custom value for Turbo Activation Ratio. Needs to be configured with valid values from LFM to Max Turbo."
  437. 854,ConfigTDP Config TDP Control,,0,"Custom value for Config TDP Control. Needs to be configured with valid values from 0 to 2."
  438. Custom Setting 1,,,,
  439. 855,Long Term Power Limit,,40,"Long Term Power Limit (aka Power Limit 1) value in Watts. XE SKU: any value can be programmed. Overclocking SKU: Value must be between Max and Min Power Limits. Other SKUs: This Value must be between Min Power Limit and TDP Limit. If Value is 0, BIOS will program TDP value."
  440. 857,Short Term Power Limit,,50,"Short Term Power Limit (aka Power Limit 2) value in Watts. If the value is 0, BIOS will program this value as 1.25*TDP. Processor applies control policies such that the package power does not exceed this limit"
  441. 859,Long Term Time Window,,28,"Long Term Time Window (aka Power Limit 1 Time) value in seconds. The value may vary from 0 to 128. If the value is 0, default values will be programmed (28 sec for Mobile and 1 sec from Desktop). Indicates the time window over which TDP value should be maintained."
  442. 860,ConfigTDP Turbo Activation Ratio,,22,"Custom value for Turbo Activation Ratio. Needs to be configured with valid values from LFM to Max Turbo."
  443. 861,ConfigTDP Config TDP Control,,1,"Custom value for Config TDP Control. Needs to be configured with valid values from 0 to 2."
  444. Custom Setting 2,,,,
  445. 862,Long Term Power Limit,,40,"Long Term Power Limit (aka Power Limit 1) value in Watts. XE SKU: any value can be programmed. Overclocking SKU: Value must be between Max and Min Power Limits. Other SKUs: This Value must be between Min Power Limit and TDP Limit. If Value is 0, BIOS will program TDP value."
  446. 864,Short Term Power Limit,,50,"Short Term Power Limit (aka Power Limit 2) value in Watts. If the value is 0, BIOS will program this value as 1.25*TDP. Processor applies control policies such that the package power does not exceed this limit"
  447. 866,Long Term Time Window,,28,"Long Term Time Window (aka Power Limit 1 Time) value in seconds. The value may vary from 0 to 128. If the value is 0, default values will be programmed (28 sec for Mobile and 1 sec from Desktop). Indicates the time window over which TDP value should be maintained."
  448. 867,ConfigTDP Turbo Activation Ratio,,25,"Custom value for Turbo Activation Ratio. Needs to be configured with valid values from LFM to Max Turbo."
  449. 868,ConfigTDP Config TDP Control,,2,"Custom value for Config TDP Control. Needs to be configured with valid values from 0 to 2."
  450. FormSet Main (A04A27F4-DF00-4D42-B552-39511302113D),,,,
  451. Form 1 (Main),,,,
  452. 402,Graphic mode,"Integrated,Switchable",,"Graphic mode"
  453. 110,Quiet Boot,"Disabled,Enabled",,"Enabled: Customer Logo is displayed, and Summary Screen is disabled. Disabled: Customer Logo is not displayed, and Summary Screen is enabled."
  454. 111,Network Boot,"Disabled,Enabled",,"Disables or enables PXE boot to LAN."
  455. 531,F12 Boot Menu,"Disabled,Enabled",,"User could choose if to display 'Press <F12> to display Boot Menu' during POST."
  456. 530,D2D Recovery,"Disabled,Enabled",,"Disable or enable D2D Recovery."
  457. 546,Wake on LAN,"Disabled,Enabled",,"Disable or enable Wake on LAN."
  458. 547,Wake on WLAN,"Disabled,Enabled",,"Disable or enable Wake on WLAN."
  459. 57,SATA Mode,"IDE Mode,AHCI Mode",,"Set Harddisk Controller Configure Type"
  460. 533,Function Key Behavior,"Function Keys,Special Keys",,"Special keys: Function keys perform the special function by default. Hold the <Fn> key to activate F1 to F12. Function keys: Function keys activate F1 to F12 by default. Hold the <Fn> key to perform special functions. Note: Special functions are only active in Windows. F1 to F12 act as normal function keys during device boot or while in BIOS."
  461. 471,Debug Reclaim,"Enabled,Disabled",," "
  462. FormSet Security (A04A27F4-DF00-4D42-B552-39511302113D),,,,
  463. Form 1 (Security),,,,
  464. 128,User Access Level,"View Only,Limited,Full",,"Limited:Only limited fields can be changed. No Access:Prevent User access to InsydeH2O Setup.View Only:Access to InsydeH2O Setup allowed but the fields cannot be changed.Full:Any field can be changed except the Supervisor password."
  465. 161,Password on Boot:,"Enabled,Disabled",,"Enable:System will ask input password on post time. Disable:System will ask input password when go to Setup Utility"
  466. FormSet Boot (A04A27F4-DF00-4D42-B552-39511302113D),,,,
  467. Form 1 (Boot),,,,
  468. 121,Boot Mode,"UEFI,Legacy BIOS",,"Select boot type to Dual type, Legacy type or UEFI type"
  469. 589,Secure Boot:,"Enabled,Disabled",,"Enable or Disable secure boot check"
  470. 109,Quick Boot,"Enabled,Disabled",,"Allows InsydeH2O to skip certain tests while booting. This will decrease the time needed to boot the system."
  471. 110,Quiet Boot,"Enabled,Disabled",,"Enabled: Customer Logo is displayed, and Summary Screen is disabled. Disabled: Customer Logo is not displayed, and Summary Screen is enabled."
  472. 100,PXE Boot capability,"UEFI:IPv4,UEFI:IPv6,UEFI:IPv4/IPv6Legacy",,"UEFI Boot:
  473.  
  474. IPv4, IPv6, BOTH
  475.  
  476. Legacy Boot:
  477.  
  478. Legacy (Dual Boot Type)"
  479. 125,Add Boot Options,"First,Last,Auto",,"Position in Boot Order for Shell,Network and Removables"
  480. 96,ACPI Selection,"Acpi1.0B,Acpi3.0,Acpi4.0,Acpi5.0",,"Select booting to Acpi3.0/Acpi1.0B"
  481. 92,USB Boot,"Enabled,Disabled",,"Disables or enables booting to USB boot devices."
  482. 117,EFI Device First,"Disabled,Enabled",,"Determine EFI device first or legacy device first. If enable, it is EFI device first. If disable, it is Legacy device first."
  483. 586,UEFI ODD boot,"Enabled,Disabled",,"UEFI Boot support boot form ODD"
  484. 101,Windows® 8 Firmware Settings,"Disabled,Disabled",,"If enabled the system firmware does not initialize keyboard and check for firmware menu key."
  485. 101,Windows® 8 Firmware Settings,"Enabled,Disabled",,"If enabled the system firmware does not initialize key
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!