No Triangle

(1) Make sure you have eg30Plus 1.1 flashed http://chris41g.devphone.org/eg30Plus-1.1.0.0.tar You must have the "CWM Manager" http://chris41g.devphone.org/CWMManager.apk app available.

(2) Make sure you have the same version of eg30Plus extracted until you have the zImage file. (ZIP --> extract --> TAR --> extract --> zImage).

(3) Push the zImage file to /sdcard/external_sd/ . It must still be called zImage !

(4) Download the original Samsung signed stock kernel (the "pulled" kernel from bubby323)

(5) Reboot into download mode (adb reboot download, or boot the device with home and volume-down pressed)

(6) Fire up ODIN, and flash the Samsung kernel

(7) Boot the device with the stock kernel. CWM Manager will still be available.

(8) Start CWM Manager, select Flash Kernel, and select the zImage from eg30Plus you previously put on your SD-card. The kernel will flash and the device will reboot.

(9) You will now notice you no longer have the warning triangle during boot, but you are actually running eg30Plus...

(10) In the future, if you only use the Flash Kernel option inside CWM Manager instead of ODIN, the triangle will not return, neither will your flash counter increase. But keep in mind, that CWM Manager can only handle a direct "zImage" if you are NOT running a kernel with full busybox support (this is currently needed for flashing kernels out of .TAR and .ZIP files)