gagz' dd-wrt mipsralink 4.9.17 (+{glibc,bash}/-{musl,bZbox})

previous logs:
1 https://pastebin.com/gyzLGKEs first successful mips32 compile
2 https://pastebin.com/nHzYRDps copied over missing libc files/tidied up (missed copying c++ over in this one)
3 https://pastebin.com/AzFHxnPD libqmi (glib 2.52 and util-linux 2.29 upgraded as well)
4 https://pastebin.com/Cyh8eivj minidlna update
5 https://pastebin.com/L9w8arvC gudev added
6 https://pastebin.com/h2xFLf2V php7 updates etc
7 https://pastebin.com/bHPpZrRx updated ar71xx for 4.9 (also did it for ar934x platform ["wasp"--mips74k])
8 https://pastebin.com/zsdTjjKQ status update on the firmware (not really exclusive to the AC55U, just packing it using mkimage vs lzma-loader etc).
9 https://pastebin.com/qNMiWkD9 failure of AC55U due to sensitive MTD flash partitioning (likely due to shoe-horning of AR7134 devicetree file for QCA9558)
10 https://pastebin.com/1BPUmMzx just an update to glibc 2.29 and using the latest 4.9 committed by brainslayer to ensure we're all on teh same page.
11 https://pastebin.com/9jrT1gkP raw bootlog from the r6700v2/r6800/r6900v2. included so people can observe how the u-boot and "stage  code seem to be "together"; that is, the u-boot seems to be customised to deal with the sercomm utilities (no mtdparts, but there is an sc_nand).
12 https://pastebin.com/TJHeu9VC discussing the sercomm boot tools and such.
13 https://pastebin.com/uadhgmvS just showing the boot log (without initramfs enabled).
14 https://pastebin.com/jNmY4y9D was just sharing the observation about initrd that wasn't really useful to the problem
15 https://pastebin.com/EUeDuLHZ briefly discussing the boot and problem with the dtb (device tree binary) not being "seen" by the kernel
16 https://pastebin.com/K7yuBYfv just a nothingness update (talking about clocksource driver being picked up when disabling the devicetree node calls in mt7621.c)
17 https://pastebin.com/LAewauYh discussing the devicetree hack created by The oh-so-clever Crispy One John Crispin (blogic), and how it must be used instead of the "appended_dtb" kernel configuration options. also pointed out the resulting file system driver issue
18 https://pastebin.com/uMBaREgn expressing my justified frustration at being unable to mount the bloody filesystem, which is/was likely caused by the network devices having "priority" on the CPU cores, thereby creating a "lock' that can only be opened with the drivers.
----

ladies and gentlemen,

today i present to you a nearly-booting R6700v2/r6800V2/r6900fw with the RALINK SDK suite of drivers. that is, no net_mediatek_soc/ethernet driver, and a return to the esteemed RAETH driver.

i am delighted that after spending a large amount of time integrating the RALINK drivers into the fw, that i got the proportional results. that is, as you guys can see below, both radios boot up and are identified as MT7615 (both of which can do 5GHZ).

it seems that an initrd is required to complete the boot, which i am excited to figure out.

shout out to all the guys on freenode for your love and support!!

now without further ado....

#mipslinux#mipslinux#mipslinux#mipslinux#mipslinux#mipslinux#mipslinux#mipslinux#mipslinux#mipslinux#mipslinux#mipslinux#mipslinux#mipslinux#mipslinux

***************************************************
    Sercomm Boot Version 1.0.1.0

***************************************************
Enter NMRP_main
Trying Eth0 (10/100-M)

 Waitting for RX_DMA_BUSY status Start... done


 ETH_STATE_ACTIVE!!
NMRP_FLASH_SIZE_buffer --> 03000000.
NMRP:LISTENING
### No NMRP Server found ###
check upgrade flag
read flag 05400000
## Booting image at bc200000 ...
   Image Name:   Linux Kernel Image
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    3852470 Bytes =  3.7 MB
   Load Address: 81001000
   Entry Point:  8164a638
...........................................................   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 8164a638) ...
## Giving linux memsize in MB, 256

Starting kernel ...

Linux version 4.9.47-rc1 (Gagan@GagansMacPro) (gcc version 7.2.0 (GCC) ) #169 SMP PREEMPT Wed Sep 6 19:21:25 MDT 2017
SoC Type: MediaTek MT7621 ver:1 eco:3
bootconsole [early0] enabled
CPU0 revision is: 0001992f (MIPS 1004Kc)
MIPS: machine is Mediatek MT7621
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
VPE topology {2,2} total 4
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Zone ranges:
  Normal   [mem 0x0000000000000000-0x000000000fffffff]
  HighMem  empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x000000000fffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat 819f1820, node_mem_map 81af1000
  Normal zone: 512 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 65536 pages, LIFO batch:15
percpu: Embedded 13 pages/cpu @81cff000 s23312 r8192 d21744 u53248
pcpu-alloc: s23312 r8192 d21744 u53248 alloc=13*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: console=ttyS0,57600 rootfstype=squashfs stacktrace debug mtdparts=MT7621-NAND:1M(boot)ro,1M(part_map)ro,4M(kernel),64M(rootfs),-(reserved)ro
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 12288 bytes
log_buf_len min size: 16384 bytes
log_buf_len: 32768 bytes
early log buf free: 14208(86%)
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Writing ErrCtl register=000000f0
Readback ErrCtl register=000000f0
Memory: 231996K/262144K available (6466K kernel code, 1270K rwdata, 2452K rodata, 296K init, 684K bss, 30148K reserved, 0K cma-reserved, 0K highmem)
Preemptible hierarchical RCU implementation.
        Build-time adjustment of leaf fanout to 32.
NR_IRQS:256
clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
pid_max: default: 4096 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Performance counters: mips/1004K PMU enabled, 2 32-bit counters available to each CPU, irq 17
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
CPU1 revision is: 0001992f (MIPS 1004Kc)
Synchronize counters for CPU 1:
done.
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
CPU2 revision is: 0001992f (MIPS 1004Kc)
Synchronize counters for CPU 2:
done.
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
CPU3 revision is: 0001992f (MIPS 1004Kc)
Synchronize counters for CPU 3:
done.
Brought up 4 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
rt2880-pinmux pinctrl: try to register 61 pins ...
pinctrl core: registered pin 0 (io0) on rt2880-pinmux
pinctrl core: registered pin 1 (io1) on rt2880-pinmux
pinctrl core: registered pin 2 (io2) on rt2880-pinmux
pinctrl core: registered pin 3 (io3) on rt2880-pinmux
pinctrl core: registered pin 4 (io4) on rt2880-pinmux
pinctrl core: registered pin 5 (io5) on rt2880-pinmux
pinctrl core: registered pin 6 (io6) on rt2880-pinmux
pinctrl core: registered pin 7 (io7) on rt2880-pinmux
pinctrl core: registered pin 8 (io8) on rt2880-pinmux
pinctrl core: registered pin 9 (io9) on rt2880-pinmux
pinctrl core: registered pin 10 (io10) on rt2880-pinmux
pinctrl core: registered pin 11 (io11) on rt2880-pinmux
pinctrl core: registered pin 12 (io12) on rt2880-pinmux
pinctrl core: registered pin 13 (io13) on rt2880-pinmux
pinctrl core: registered pin 14 (io14) on rt2880-pinmux
pinctrl core: registered pin 15 (io15) on rt2880-pinmux
pinctrl core: registered pin 16 (io16) on rt2880-pinmux
pinctrl core: registered pin 17 (io17) on rt2880-pinmux
pinctrl core: registered pin 18 (io18) on rt2880-pinmux
pinctrl core: registered pin 19 (io19) on rt2880-pinmux
pinctrl core: registered pin 20 (io20) on rt2880-pinmux
pinctrl core: registered pin 21 (io21) on rt2880-pinmux
pinctrl core: registered pin 22 (io22) on rt2880-pinmux
pinctrl core: registered pin 23 (io23) on rt2880-pinmux
pinctrl core: registered pin 24 (io24) on rt2880-pinmux
pinctrl core: registered pin 25 (io25) on rt2880-pinmux
pinctrl core: registered pin 26 (io26) on rt2880-pinmux
pinctrl core: registered pin 27 (io27) on rt2880-pinmux
pinctrl core: registered pin 28 (io28) on rt2880-pinmux
pinctrl core: registered pin 29 (io29) on rt2880-pinmux
pinctrl core: registered pin 30 (io30) on rt2880-pinmux
pinctrl core: registered pin 31 (io31) on rt2880-pinmux
pinctrl core: registered pin 32 (io32) on rt2880-pinmux
pinctrl core: registered pin 33 (io33) on rt2880-pinmux
pinctrl core: registered pin 34 (io34) on rt2880-pinmux
pinctrl core: registered pin 35 (io35) on rt2880-pinmux
pinctrl core: registered pin 36 (io36) on rt2880-pinmux
pinctrl core: registered pin 37 (io37) on rt2880-pinmux
pinctrl core: registered pin 38 (io38) on rt2880-pinmux
pinctrl core: registered pin 39 (io39) on rt2880-pinmux
pinctrl core: registered pin 40 (io40) on rt2880-pinmux
pinctrl core: registered pin 41 (io41) on rt2880-pinmux
pinctrl core: registered pin 42 (io42) on rt2880-pinmux
pinctrl core: registered pin 43 (io43) on rt2880-pinmux
pinctrl core: registered pin 44 (io44) on rt2880-pinmux
pinctrl core: registered pin 45 (io45) on rt2880-pinmux
pinctrl core: registered pin 46 (io46) on rt2880-pinmux
pinctrl core: registered pin 47 (io47) on rt2880-pinmux
pinctrl core: registered pin 48 (io48) on rt2880-pinmux
pinctrl core: registered pin 49 (io49) on rt2880-pinmux
pinctrl core: registered pin 50 (io50) on rt2880-pinmux
pinctrl core: registered pin 51 (io51) on rt2880-pinmux
pinctrl core: registered pin 52 (io52) on rt2880-pinmux
pinctrl core: registered pin 53 (io53) on rt2880-pinmux
pinctrl core: registered pin 54 (io54) on rt2880-pinmux
pinctrl core: registered pin 55 (io55) on rt2880-pinmux
pinctrl core: registered pin 56 (io56) on rt2880-pinmux
pinctrl core: registered pin 57 (io57) on rt2880-pinmux
pinctrl core: registered pin 58 (io58) on rt2880-pinmux
pinctrl core: registered pin 59 (io59) on rt2880-pinmux
pinctrl core: registered pin 60 (io60) on rt2880-pinmux
pinctrl core: add 5 pinctrl maps
rt2880-pinmux pinctrl: found group selector 1 for i2c
rt2880-pinmux pinctrl: found group selector 3 for uart2
rt2880-pinmux pinctrl: found group selector 2 for uart3
rt2880-pinmux pinctrl: found group selector 8 for rgmii2
rt2880-pinmux pinctrl: found group selector 10 for sdhci
rt2880-pinmux pinctrl: request pin 3 (io3) for pinctrl
rt2880-pinmux pinctrl: request pin 4 (io4) for pinctrl
rt2880-pinmux pinctrl: request pin 9 (io9) for pinctrl
rt2880-pinmux pinctrl: request pin 10 (io10) for pinctrl
rt2880-pinmux pinctrl: request pin 11 (io11) for pinctrl
rt2880-pinmux pinctrl: request pin 12 (io12) for pinctrl
rt2880-pinmux pinctrl: request pin 5 (io5) for pinctrl
rt2880-pinmux pinctrl: request pin 6 (io6) for pinctrl
rt2880-pinmux pinctrl: request pin 7 (io7) for pinctrl
rt2880-pinmux pinctrl: request pin 8 (io8) for pinctrl
rt2880-pinmux pinctrl: request pin 22 (io22) for pinctrl
rt2880-pinmux pinctrl: request pin 23 (io23) for pinctrl
rt2880-pinmux pinctrl: request pin 24 (io24) for pinctrl
rt2880-pinmux pinctrl: request pin 25 (io25) for pinctrl
rt2880-pinmux pinctrl: request pin 26 (io26) for pinctrl
rt2880-pinmux pinctrl: request pin 27 (io27) for pinctrl
rt2880-pinmux pinctrl: request pin 28 (io28) for pinctrl
rt2880-pinmux pinctrl: request pin 29 (io29) for pinctrl
rt2880-pinmux pinctrl: request pin 30 (io30) for pinctrl
rt2880-pinmux pinctrl: request pin 31 (io31) for pinctrl
rt2880-pinmux pinctrl: request pin 32 (io32) for pinctrl
rt2880-pinmux pinctrl: request pin 33 (io33) for pinctrl
rt2880-pinmux pinctrl: request pin 41 (io41) for pinctrl
rt2880-pinmux pinctrl: request pin 42 (io42) for pinctrl
rt2880-pinmux pinctrl: request pin 43 (io43) for pinctrl
rt2880-pinmux pinctrl: request pin 44 (io44) for pinctrl
rt2880-pinmux pinctrl: request pin 45 (io45) for pinctrl
rt2880-pinmux pinctrl: request pin 46 (io46) for pinctrl
rt2880-pinmux pinctrl: request pin 47 (io47) for pinctrl
rt2880-pinmux pinctrl: request pin 48 (io48) for pinctrl
rt2880-pinmux pinctrl: failed to lookup the sleep state
FPU Affinity set after 11720 emulations
pinctrl core: add 1 pinctrl maps
rt2880-pinmux pinctrl: found group selector 6 for pcie
rt2880-pinmux pinctrl: request pin 19 (io19) for 1e140000.pcie
pull PCIe RST: RALINK_RSTCTRL = 0
release PCIe RST: RALINK_RSTCTRL = 7000000
***** Xtal 40MHz *****
release PCIe RST: RALINK_RSTCTRL = 7000000
Port 0 N_FTS = 1b102800
Port 1 N_FTS = 1b102800
Port 2 N_FTS = 1b102800
PCIE2 no card, disable it(RST&CLK)
 -> 21007f2
PCIE0 enabled
PCIE1 enabled
PCI host bridge /pcie@1e140000 ranges:
 MEM 0x0000000060000000..0x000000006fffffff
  IO 0x000000001e160000..0x000000001e16ffff
PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
mt7621_gpio 1e000600.gpio: registering 32 gpios
mt7621_gpio 1e000600.gpio: registering 32 gpios
mt7621_gpio 1e000600.gpio: registering 32 gpios
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
pci_bus 0000:00: root bus resource [io  0xffffffff]
pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
pci 0000:00:00.0: supports D1
pci 0000:00:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff]
pci 0000:00:01.0: supports D1
pci 0000:00:01.0: PME# supported from D0 D1 D3hot
pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
pci 0000:02:00.0: [14c3:7615] type 00 class 0x000280
pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 02]
pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
BAR0 at slot 0 = 0
bus=0x0, slot = 0x0
BAR0 at slot 1 = 0
bus=0x0, slot = 0x1
bus=0x1, slot = 0x0, irq=0x0
bus=0x2, slot = 0x1, irq=0x0
clocksource: Switched to clocksource GIC
random: fast init done
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 128 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
NET: Registered protocol family 1
PCI: CLS 80 bytes, default 32
4 CPUs re-calibrate udelay(lpj = 2924544)
alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
workingset: timestamp_bits=30 max_order=16 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
io scheduler noop registered
io scheduler deadline registered (default)
serial8250_init
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250 serial8250: no of_node; not parsing pinctrl DT
console [ttyS0] disabled
1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
console [ttyS0] enabled
console [ttyS0] enabled
bootconsole [early0] disabled
bootconsole [early0] disabled
ralink_gpio: unable to register character device
MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
Allocate 16 byte aligned buffer: 81a5a0c0
Enable NFI Clock
# MTK NAND # : Use HW ECC
Device found in MTK table, ID: c2f1, EXT_ID: 809502
Support this Device in MTK table! c2f1
[NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
nand: Macronix MX30UF1G18AC 128MiB 1.8V
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Scanning device for bad blocks
Bad eraseblock 640 at 0x000005000000
Bad eraseblock 641 at 0x000005020000
Bad eraseblock 642 at 0x000005040000
Bad eraseblock 643 at 0x000005060000
Bad eraseblock 644 at 0x000005080000
Bad eraseblock 645 at 0x0000050a0000
Bad eraseblock 646 at 0x0000050c0000
Bad eraseblock 647 at 0x0000050e0000
Bad eraseblock 648 at 0x000005100000
Bad eraseblock 649 at 0x000005120000
Bad eraseblock 650 at 0x000005140000
Bad eraseblock 651 at 0x000005160000
Bad eraseblock 652 at 0x000005180000
Bad eraseblock 653 at 0x0000051a0000
Bad eraseblock 654 at 0x0000051c0000
Bad eraseblock 655 at 0x0000051e0000
Bad eraseblock 656 at 0x000005200000
Bad eraseblock 657 at 0x000005220000
Bad eraseblock 658 at 0x000005240000
Bad eraseblock 659 at 0x000005260000
Bad eraseblock 660 at 0x000005280000
Bad eraseblock 661 at 0x0000052a0000
Bad eraseblock 662 at 0x0000052c0000
Bad eraseblock 663 at 0x0000052e0000
5 cmdlinepart partitions found on MTD device MT7621-NAND
Creating 5 MTD partitions on "MT7621-NAND":
0x000000000000-0x000000100000 : "boot"
0x000000100000-0x000000200000 : "part_map"
0x000000200000-0x000000600000 : "kernel"
0x000000600000-0x000004600000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
 magic 73717368 vs 73717368
mtd: partition "ddwrt" created automatically, ofs=2160000, len=24A0000
0x000002160000-0x000004600000 : "ddwrt"
0x000004600000-0x000008000000 : "reserved"
[mtk_nand] probe successfully!
Signature matched and data read!
load_fact_bbt success 1023
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
GMAC1_MAC_ADRH -- : 0x0000000c
GMAC1_MAC_ADRL -- : 0x4328801c
Ralink APSoC Ethernet Driver Initilization. v3.1  512 rx/tx descriptors allocated, mtu = 1500!
GMAC1_MAC_ADRH -- : 0x0000000c
GMAC1_MAC_ADRL -- : 0x4328801a
PROC INIT OK!
register mt_drv
mt_drv 0000:01:00.0: no of_node; not parsing pinctrl DT


=== pAd = c0101000, size = 3653456 ===

<-- RTMPAllocAdapterBlock, Status=0
get_wdev_by_idx: invalid idx(0)
pAd->PciHif.CSRBaseAddress =0xc0000000, csr_addr=0xc0000000!
get_wdev_by_idx: invalid idx(0)
RTMPInitPCIeDevice():device_id=0x7615
DriverOwn()::Try to Clear FW Own...
DriverOwn()::Success to clear FW Own
mt_pci_chip_cfg(): HWVer=0x8a10, FWVer=0x8a10, pAd->ChipID=0x7615
mt_pci_chip_cfg(): HIF_SYS_REV=0x76150001
RtmpChipOpsHook(493): Not support for HIF_MT yet! MACVersion=0x0
mt7615_init()-->
Use 1st ePAeLNA default bin.
Use 0st /etc/mtk/mt7615/R6800_5G_EEPROM_20170105.bin default bin.
<--mt7615_init()
ChipOpsMCUHook
cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
cut_through_token_list_init(): 8f464b88,8f464b88
cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
cut_through_token_list_init(): 8f464b98,8f464b98
<-- RTMPAllocTxRxRingMemory, Status=0
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
80211> RFICType= 3, NumOfChan= 58
80211> Number of rate = 12
80211> CurTxPower = 0 dBm
80211> TxStream = 1
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
80211> CFG80211_Register with max interface 8
get_wdev_by_idx: invalid idx(0)
pci probe count=1
mt_drv 0000:02:00.0: no of_node; not parsing pinctrl DT


=== pAd = c0581000, size = 3653456 ===

<-- RTMPAllocAdapterBlock, Status=0
get_wdev_by_idx: invalid idx(0)
pAd->PciHif.CSRBaseAddress =0xc0480000, csr_addr=0xc0480000!
get_wdev_by_idx: invalid idx(0)
RTMPInitPCIeDevice():device_id=0x7615
DriverOwn()::Try to Clear FW Own...
DriverOwn()::Success to clear FW Own
mt_pci_chip_cfg(): HWVer=0x8a10, FWVer=0x8a10, pAd->ChipID=0x7615
mt_pci_chip_cfg(): HIF_SYS_REV=0x76150001
RtmpChipOpsHook(493): Not support for HIF_MT yet! MACVersion=0x0
mt7615_init()-->
Use 2nd ePAeLNA default bin.
Use 1st /etc/mtk/mt7615/R6800_5G_EEPROM_20170105.bin default bin.
<--mt7615_init()
ChipOpsMCUHook
cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
cut_through_token_list_init(): 8eea7308,8eea7308
cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
cut_through_token_list_init(): 8eea7318,8eea7318
<-- RTMPAllocTxRxRingMemory, Status=0
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
80211> RFICType= 3, NumOfChan= 58
80211> Number of rate = 12
80211> CurTxPower = 0 dBm
80211> TxStream = 1
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
get_wdev_by_idx: invalid idx(0)
80211> CFG80211_Register with max interface 8
get_wdev_by_idx: invalid idx(0)
pci probe count=2
xhci-mtk 1e1c0000.xhci: xHCI Host Controller
xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x00210010
xhci-mtk 1e1c0000.xhci: irq 21, io mem 0x1e1c0000
usb usb1: no of_node; not parsing pinctrl DT
hub 1-0:1.0: no of_node; not parsing pinctrl DT
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci-mtk 1e1c0000.xhci: xHCI Host Controller
xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: no of_node; not parsing pinctrl DT
hub 2-0:1.0: no of_node; not parsing pinctrl DT
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
Ralink APSoC Hardware Watchdog Timer
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
u32 classifier
    Performance counters on
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
ctnetlink v0.93: registering with nfnetlink.
ipip: IPv4 and MPLS over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
NET: Registered protocol family 17
Bridge firewalling registered
8021q: 802.1Q VLAN Support v1.8
nvram driver (major 251) installed
hctosys: unable to open rtc device (rtc0)
Please be patient, while System loads ...
VFS: Cannot open root device "(null)" or unknown-block(31,3): error -2
Please append a correct "root=" boot option; here are the available partitions:
1f00            1024 mtdblock0  (driver?)
1f01            1024 mtdblock1  (driver?)
1f02            4096 mtdblock2  (driver?)
1f03           65536 mtdblock3  (driver?)
1f04           37504 mtdblock4  (driver?)
1f05           59392 mtdblock5  (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,3)
---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,3)