[ 4832.805763] em28xx 1-3:1.0: dvb set to isoc mode.
[ 4832.861545] em28xx 1-3:1.0: chip ID is em28174
[ 4834.048968] em28xx 1-3:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xfa790dca
[ 4834.048971] em28xx 1-3:1.0: EEPROM info:
[ 4834.048972] em28xx 1-3:1.0:  microcode start address = 0x0004, boot configuration = 0x01
[ 4834.056453] em28xx 1-3:1.0:  AC97 audio (5 sample rates)
[ 4834.056455] em28xx 1-3:1.0:  500mA max power
[ 4834.056457] em28xx 1-3:1.0:  Table at offset 0x27, strings=0x0a72, 0x187c, 0x086a
[ 4834.111440] em28xx 1-3:1.0: Identified as Hauppauge WinTV-dualHD 01595 ATSC/QAM (card=100)
[ 4834.112495] tveeprom: Hauppauge model 204101, rev B2I6, serial# 13811222
[ 4834.112497] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
[ 4834.112498] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[ 4834.112499] tveeprom: audio processor is None (idx 0)
[ 4834.112500] tveeprom: has no radio, has IR receiver, has no IR transmitter
[ 4834.112504] em28xx 1-3:1.0: dvb ts2 set to isoc mode.
[ 4834.312801] usbcore: registered new interface driver em28xx
[ 4834.315864] em28xx 1-3:1.0: Binding DVB extension
[ 4834.321960] i2c i2c-8: Added multiplexed i2c bus 11
[ 4834.321963] lgdt3306a 8-0059: LG Electronics LGDT3306A successfully identified
[ 4834.323967] si2157 11-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
[ 4834.323990] dvbdev: DVB: registering new adapter (1-3:1.0)
[ 4834.323994] em28xx 1-3:1.0: DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3306A VSB/QAM Frontend)...
[ 4834.326755] em28xx 1-3:1.0: DVB extension successfully initialized
[ 4834.326758] em28xx 1-3:1.0: Binding DVB extension
[ 4834.333732] i2c i2c-10: Added multiplexed i2c bus 12
[ 4834.333734] lgdt3306a 10-000e: LG Electronics LGDT3306A successfully identified
[ 4834.335584] si2157 12-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached
[ 4834.335608] dvbdev: DVB: registering new adapter (1-3:1.0)
[ 4834.335612] em28xx 1-3:1.0: DVB: registering adapter 1 frontend 0 (LG Electronics LGDT3306A VSB/QAM Frontend)...
[ 4834.338024] em28xx 1-3:1.0: DVB extension successfully initialized
[ 4834.338026] em28xx: Registered (Em28xx dvb Extension) extension
[ 4834.340518] em28xx 1-3:1.0: Registering input extension
[ 4834.340630] Registered IR keymap rc-hauppauge
[ 4834.340778] rc rc0: 1-3:1.0 IR as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/rc/rc0
[ 4834.340828] input: 1-3:1.0 IR as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/rc/rc0/input65
[ 4834.341903] em28xx 1-3:1.0: Input extension successfully initialized
[ 4834.341906] em28xx 1-3:1.0: Remote control support is not available for this card.
[ 4834.341908] em28xx: Registered (Em28xx Input Extension) extension
[ 4840.813250] si2157 11-0060: found a 'Silicon Labs Si2157-A30'
[ 4840.863656] si2157 11-0060: firmware version: 3.0.5