API tools faq
paste
frobineau

Smartctl output

frobineau
Oct 18th, 2018
169
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 33.41 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-33201808301234-generic] (local build)
  2. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Western Digital Red
  6. Device Model: WDC WD40EFRX-68WT0N0
  7. Serial Number: WD-WCC4E5NFLRU3
  8. LU WWN Device Id: 5 0014ee 262ee543f
  9. Firmware Version: 82.00A82
  10. User Capacity: 4,000,787,030,016 bytes [4.00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 5400 rpm
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: ACS-2 (minor revision not indicated)
  15. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  16. Local Time is: Thu Oct 18 08:54:16 2018 CEST
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19. AAM feature is: Unavailable
  20. APM feature is: Unavailable
  21. Rd look-ahead is: Enabled
  22. Write cache is: Enabled
  23. ATA Security is: Disabled, NOT FROZEN [SEC1]
  24.  
  25. === START OF READ SMART DATA SECTION ===
  26. SMART overall-health self-assessment test result: PASSED
  27.  
  28. General SMART Values:
  29. Offline data collection status: (0x00) Offline data collection activity
  30. was never started.
  31. Auto Offline Data Collection: Disabled.
  32. Self-test execution status: ( 0) The previous self-test routine completed
  33. without error or no self-test has ever
  34. been run.
  35. Total time to complete Offline
  36. data collection: (52020) seconds.
  37. Offline data collection
  38. capabilities: (0x7b) SMART execute Offline immediate.
  39. Auto Offline data collection on/off support.
  40. Suspend Offline collection upon new
  41. command.
  42. Offline surface scan supported.
  43. Self-test supported.
  44. Conveyance Self-test supported.
  45. Selective Self-test supported.
  46. SMART capabilities: (0x0003) Saves SMART data before entering
  47. power-saving mode.
  48. Supports SMART auto save timer.
  49. Error logging capability: (0x01) Error logging supported.
  50. General Purpose Logging supported.
  51. Short self-test routine
  52. recommended polling time: ( 2) minutes.
  53. Extended self-test routine
  54. recommended polling time: ( 520) minutes.
  55. Conveyance self-test routine
  56. recommended polling time: ( 5) minutes.
  57. SCT capabilities: (0x703d) SCT Status supported.
  58. SCT Error Recovery Control supported.
  59. SCT Feature Control supported.
  60. SCT Data Table supported.
  61.  
  62. SMART Attributes Data Structure revision number: 16
  63. Vendor Specific SMART Attributes with Thresholds:
  64. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  65. 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1043
  66. 3 Spin_Up_Time POS--K 180 174 021 - 7975
  67. 4 Start_Stop_Count -O--CK 100 100 000 - 73
  68. 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
  69. 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
  70. 9 Power_On_Hours -O--CK 082 082 000 - 13260
  71. 10 Spin_Retry_Count -O--CK 100 253 000 - 0
  72. 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
  73. 12 Power_Cycle_Count -O--CK 100 100 000 - 73
  74. 192 Power-Off_Retract_Count -O--CK 200 200 000 - 29
  75. 193 Load_Cycle_Count -O--CK 196 196 000 - 13491
  76. 194 Temperature_Celsius -O---K 117 106 000 - 35
  77. 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
  78. 197 Current_Pending_Sector -O--CK 200 200 000 - 0
  79. 198 Offline_Uncorrectable ----CK 100 253 000 - 0
  80. 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
  81. 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 50
  82. ||||||_ K auto-keep
  83. |||||__ C event count
  84. ||||___ R error rate
  85. |||____ S speed/performance
  86. ||_____ O updated online
  87. |______ P prefailure warning
  88.  
  89. General Purpose Log Directory Version 1
  90. SMART Log Directory Version 1 [multi-sector log support]
  91. Address Access R/W Size Description
  92. 0x00 GPL,SL R/O 1 Log Directory
  93. 0x01 SL R/O 1 Summary SMART error log
  94. 0x02 SL R/O 5 Comprehensive SMART error log
  95. 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
  96. 0x06 SL R/O 1 SMART self-test log
  97. 0x07 GPL R/O 1 Extended self-test log
  98. 0x09 SL R/W 1 Selective self-test log
  99. 0x10 GPL R/O 1 SATA NCQ Queued Error log
  100. 0x11 GPL R/O 1 SATA Phy Event Counters log
  101. 0x21 GPL R/O 1 Write stream error log
  102. 0x22 GPL R/O 1 Read stream error log
  103. 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  104. 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
  105. 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
  106. 0xb7 GPL,SL VS 39 Device vendor specific log
  107. 0xbd GPL,SL VS 1 Device vendor specific log
  108. 0xc0 GPL,SL VS 1 Device vendor specific log
  109. 0xc1 GPL VS 93 Device vendor specific log
  110. 0xe0 GPL,SL R/W 1 SCT Command/Status
  111. 0xe1 GPL,SL R/W 1 SCT Data Transfer
  112.  
  113. SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  114. Device Error Count: 43 (device log contains only the most recent 24 errors)
  115. CR = Command Register
  116. FEATR = Features Register
  117. COUNT = Count (was: Sector Count) Register
  118. LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
  119. LH = LBA High (was: Cylinder High) Register ] LBA
  120. LM = LBA Mid (was: Cylinder Low) Register ] Register
  121. LL = LBA Low (was: Sector Number) Register ]
  122. DV = Device (was: Device/Head) Register
  123. DC = Device Control Register
  124. ER = Error register
  125. ST = Status register
  126. Powered_Up_Time is measured from power on, and printed as
  127. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  128. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  129.  
  130. Error 43 [18] occurred at disk power-on lifetime: 13157 hours (548 days + 5 hours)
  131. When the command that caused the error occurred, the device was active or idle.
  132.  
  133. After command completion occurred, registers were:
  134. ER -- ST COUNT LBA_48 LH LM LL DV DC
  135. -- -- -- == -- == == == -- -- -- -- --
  136. 40 -- 51 00 00 00 00 00 02 e9 e0 40 00 Error: UNC at LBA = 0x0002e9e0 = 190944
  137.  
  138. Commands leading to the command that caused the error were:
  139. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  140. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  141. 60 01 00 00 08 00 00 00 02 ea 48 40 00 12d+15:42:14.157 READ FPDMA QUEUED
  142. 60 00 e0 00 00 00 00 00 02 e9 68 40 00 12d+15:42:14.157 READ FPDMA QUEUED
  143. 60 00 e0 00 08 00 00 00 02 e8 88 40 00 12d+15:42:10.216 READ FPDMA QUEUED
  144. 60 01 00 00 00 00 00 00 02 e7 88 40 00 12d+15:42:10.215 READ FPDMA QUEUED
  145. 60 01 00 00 08 00 00 00 02 e6 88 40 00 12d+15:42:07.629 READ FPDMA QUEUED
  146.  
  147. Error 42 [17] occurred at disk power-on lifetime: 11138 hours (464 days + 2 hours)
  148. When the command that caused the error occurred, the device was active or idle.
  149.  
  150. After command completion occurred, registers were:
  151. ER -- ST COUNT LBA_48 LH LM LL DV DC
  152. -- -- -- == -- == == == -- -- -- -- --
  153. 40 -- 51 00 00 00 00 00 01 c1 58 40 00 Error: UNC at LBA = 0x0001c158 = 115032
  154.  
  155. Commands leading to the command that caused the error were:
  156. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  157. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  158. 60 01 00 00 38 00 00 00 01 c1 c8 40 08 9d+11:04:59.810 READ FPDMA QUEUED
  159. 60 01 00 00 30 00 00 00 01 c0 c8 40 08 9d+11:04:59.809 READ FPDMA QUEUED
  160. 60 01 00 00 28 00 00 00 01 bf c8 40 08 9d+11:04:59.808 READ FPDMA QUEUED
  161. 60 01 00 00 20 00 00 00 01 be c8 40 08 9d+11:04:59.797 READ FPDMA QUEUED
  162. 60 01 00 00 18 00 00 00 01 bd c8 40 08 9d+11:04:59.796 READ FPDMA QUEUED
  163.  
  164. Error 41 [16] occurred at disk power-on lifetime: 10193 hours (424 days + 17 hours)
  165. When the command that caused the error occurred, the device was active or idle.
  166.  
  167. After command completion occurred, registers were:
  168. ER -- ST COUNT LBA_48 LH LM LL DV DC
  169. -- -- -- == -- == == == -- -- -- -- --
  170. 40 -- 51 00 00 00 00 00 01 d9 c8 40 00 Error: UNC at LBA = 0x0001d9c8 = 121288
  171.  
  172. Commands leading to the command that caused the error were:
  173. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  174. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  175. 60 01 00 00 a0 00 00 00 01 da c8 40 08 6d+19:57:45.564 READ FPDMA QUEUED
  176. 60 01 00 00 98 00 00 00 01 d9 c8 40 08 6d+19:57:45.564 READ FPDMA QUEUED
  177. 60 01 00 00 90 00 00 00 01 d8 c8 40 08 6d+19:57:45.174 READ FPDMA QUEUED
  178. 60 01 00 00 88 00 00 00 01 d7 c8 40 08 6d+19:57:45.174 READ FPDMA QUEUED
  179. 60 01 00 00 80 00 00 00 01 d6 c8 40 08 6d+19:57:43.996 READ FPDMA QUEUED
  180.  
  181. Error 40 [15] occurred at disk power-on lifetime: 10193 hours (424 days + 17 hours)
  182. When the command that caused the error occurred, the device was active or idle.
  183.  
  184. After command completion occurred, registers were:
  185. ER -- ST COUNT LBA_48 LH LM LL DV DC
  186. -- -- -- == -- == == == -- -- -- -- --
  187. 40 -- 51 00 00 00 00 00 01 c8 a0 40 00 Error: UNC at LBA = 0x0001c8a0 = 116896
  188.  
  189. Commands leading to the command that caused the error were:
  190. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  191. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  192. 60 01 00 00 28 00 00 00 01 c7 c8 40 08 6d+19:57:30.509 READ FPDMA QUEUED
  193. 60 01 00 00 20 00 00 00 01 c6 c8 40 08 6d+19:57:30.509 READ FPDMA QUEUED
  194. 60 01 00 00 18 00 00 00 01 c5 c8 40 08 6d+19:57:28.165 READ FPDMA QUEUED
  195. 60 01 00 00 10 00 00 00 01 c4 c8 40 08 6d+19:57:28.165 READ FPDMA QUEUED
  196. 60 01 00 00 08 00 00 00 01 c3 c8 40 08 6d+19:57:25.522 READ FPDMA QUEUED
  197.  
  198. Error 39 [14] occurred at disk power-on lifetime: 8577 hours (357 days + 9 hours)
  199. When the command that caused the error occurred, the device was active or idle.
  200.  
  201. After command completion occurred, registers were:
  202. ER -- ST COUNT LBA_48 LH LM LL DV DC
  203. -- -- -- == -- == == == -- -- -- -- --
  204. 40 -- 51 00 fe 00 00 00 01 d5 98 40 00 Error: UNC at LBA = 0x0001d598 = 120216
  205.  
  206. Commands leading to the command that caused the error were:
  207. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  208. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  209. 60 01 00 00 98 00 00 00 01 d5 c8 40 08 2d+14:05:50.214 READ FPDMA QUEUED
  210. 60 01 00 00 90 00 00 00 01 d4 c8 40 08 2d+14:05:50.214 READ FPDMA QUEUED
  211. 60 01 00 00 88 00 00 00 01 d3 c8 40 08 2d+14:05:47.904 READ FPDMA QUEUED
  212. 60 01 00 00 80 00 00 00 01 d2 c8 40 08 2d+14:05:47.904 READ FPDMA QUEUED
  213. 60 01 00 00 78 00 00 00 01 d1 c8 40 08 2d+14:05:45.094 READ FPDMA QUEUED
  214.  
  215. Error 38 [13] occurred at disk power-on lifetime: 8192 hours (341 days + 8 hours)
  216. When the command that caused the error occurred, the device was active or idle.
  217.  
  218. After command completion occurred, registers were:
  219. ER -- ST COUNT LBA_48 LH LM LL DV DC
  220. -- -- -- == -- == == == -- -- -- -- --
  221. 40 -- 51 00 fe 00 00 00 01 cd 18 40 00 Error: UNC at LBA = 0x0001cd18 = 118040
  222.  
  223. Commands leading to the command that caused the error were:
  224. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  225. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  226. 60 01 00 00 10 00 00 00 01 cd c8 40 08 2d+17:20:23.827 READ FPDMA QUEUED
  227. 60 01 00 00 08 00 00 00 01 cc c8 40 08 2d+17:20:23.827 READ FPDMA QUEUED
  228. 60 01 00 00 00 00 00 00 01 cb c8 40 08 2d+17:20:23.424 READ FPDMA QUEUED
  229. 60 01 00 00 f0 00 00 00 01 ca c8 40 08 2d+17:20:23.424 READ FPDMA QUEUED
  230. 60 01 00 00 e8 00 00 00 01 c9 c8 40 08 2d+17:20:22.624 READ FPDMA QUEUED
  231.  
  232. Error 37 [12] occurred at disk power-on lifetime: 7521 hours (313 days + 9 hours)
  233. When the command that caused the error occurred, the device was active or idle.
  234.  
  235. After command completion occurred, registers were:
  236. ER -- ST COUNT LBA_48 LH LM LL DV DC
  237. -- -- -- == -- == == == -- -- -- -- --
  238. 40 -- 51 00 00 00 00 00 03 61 b8 40 00 Error: UNC at LBA = 0x000361b8 = 221624
  239.  
  240. Commands leading to the command that caused the error were:
  241. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  242. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  243. 60 01 00 00 28 00 00 00 03 62 08 40 08 13d+03:04:35.771 READ FPDMA QUEUED
  244. 60 01 00 00 20 00 00 00 03 61 08 40 08 13d+03:04:35.771 READ FPDMA QUEUED
  245. 60 01 00 00 18 00 00 00 03 60 08 40 08 13d+03:04:35.770 READ FPDMA QUEUED
  246. 60 01 00 00 10 00 00 00 03 5f 08 40 08 13d+03:04:35.769 READ FPDMA QUEUED
  247. 60 01 00 00 08 00 00 00 03 5e 08 40 08 13d+03:04:35.769 READ FPDMA QUEUED
  248.  
  249. Error 36 [11] occurred at disk power-on lifetime: 7521 hours (313 days + 9 hours)
  250. When the command that caused the error occurred, the device was active or idle.
  251.  
  252. After command completion occurred, registers were:
  253. ER -- ST COUNT LBA_48 LH LM LL DV DC
  254. -- -- -- == -- == == == -- -- -- -- --
  255. 40 -- 51 00 fe 00 00 00 01 c5 d8 40 00 Error: UNC at LBA = 0x0001c5d8 = 116184
  256.  
  257. Commands leading to the command that caused the error were:
  258. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  259. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  260. 60 01 00 00 20 00 00 00 01 c5 c8 40 08 13d+03:03:58.456 READ FPDMA QUEUED
  261. 60 01 00 00 18 00 00 00 01 c4 c8 40 08 13d+03:03:58.456 READ FPDMA QUEUED
  262. 60 00 10 00 10 00 00 00 00 2b 80 40 08 13d+03:03:58.455 READ FPDMA QUEUED
  263. 60 00 08 00 08 00 00 fe 8e c4 a8 40 08 13d+03:03:58.455 READ FPDMA QUEUED
  264. 60 00 08 00 00 00 00 fe 8e c4 98 40 08 13d+03:03:58.421 READ FPDMA QUEUED
  265.  
  266. Error 35 [10] occurred at disk power-on lifetime: 7194 hours (299 days + 18 hours)
  267. When the command that caused the error occurred, the device was active or idle.
  268.  
  269. After command completion occurred, registers were:
  270. ER -- ST COUNT LBA_48 LH LM LL DV DC
  271. -- -- -- == -- == == == -- -- -- -- --
  272. 40 -- 51 00 00 00 00 00 01 e8 58 40 00 Error: UNC at LBA = 0x0001e858 = 125016
  273.  
  274. Commands leading to the command that caused the error were:
  275. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  276. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  277. 60 01 00 00 a0 00 00 00 01 e7 c8 40 08 00:44:43.188 READ FPDMA QUEUED
  278. 60 01 00 00 98 00 00 00 01 e6 c8 40 08 00:44:43.187 READ FPDMA QUEUED
  279. 60 01 00 00 90 00 00 00 01 e5 c8 40 08 00:44:43.186 READ FPDMA QUEUED
  280. 60 01 00 00 88 00 00 00 01 e4 c8 40 08 00:44:43.186 READ FPDMA QUEUED
  281. 60 01 00 00 80 00 00 00 01 e3 c8 40 08 00:44:42.796 READ FPDMA QUEUED
  282.  
  283. Error 34 [9] occurred at disk power-on lifetime: 7194 hours (299 days + 18 hours)
  284. When the command that caused the error occurred, the device was active or idle.
  285.  
  286. After command completion occurred, registers were:
  287. ER -- ST COUNT LBA_48 LH LM LL DV DC
  288. -- -- -- == -- == == == -- -- -- -- --
  289. 40 -- 51 00 fe 00 00 00 01 af f8 40 00 Error: UNC at LBA = 0x0001aff8 = 110584
  290.  
  291. Commands leading to the command that caused the error were:
  292. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  293. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  294. 60 01 00 00 b8 00 00 00 01 af c8 40 08 00:44:16.382 READ FPDMA QUEUED
  295. 60 01 00 00 b0 00 00 00 01 ae c8 40 08 00:44:16.381 READ FPDMA QUEUED
  296. 60 01 00 00 a0 00 00 00 01 ad c8 40 08 00:44:16.378 READ FPDMA QUEUED
  297. 60 01 00 00 98 00 00 00 01 ac c8 40 08 00:44:16.378 READ FPDMA QUEUED
  298. 60 01 00 00 90 00 00 00 01 ab c8 40 08 00:44:16.377 READ FPDMA QUEUED
  299.  
  300. Error 33 [8] occurred at disk power-on lifetime: 7050 hours (293 days + 18 hours)
  301. When the command that caused the error occurred, the device was active or idle.
  302.  
  303. After command completion occurred, registers were:
  304. ER -- ST COUNT LBA_48 LH LM LL DV DC
  305. -- -- -- == -- == == == -- -- -- -- --
  306. 40 -- 51 00 00 00 00 00 02 e4 00 40 00 Error: UNC at LBA = 0x0002e400 = 189440
  307.  
  308. Commands leading to the command that caused the error were:
  309. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  310. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  311. 60 01 00 00 80 00 00 00 02 e3 a8 40 08 00:10:39.581 READ FPDMA QUEUED
  312. 60 00 e0 00 78 00 00 00 02 e2 c8 40 08 00:10:39.580 READ FPDMA QUEUED
  313. 60 01 00 00 70 00 00 00 02 e1 c8 40 08 00:10:39.579 READ FPDMA QUEUED
  314. 60 01 00 00 68 00 00 00 02 e0 c8 40 08 00:10:39.579 READ FPDMA QUEUED
  315. 60 01 00 00 60 00 00 00 02 df c8 40 08 00:10:39.577 READ FPDMA QUEUED
  316.  
  317. Error 32 [7] occurred at disk power-on lifetime: 7050 hours (293 days + 18 hours)
  318. When the command that caused the error occurred, the device was active or idle.
  319.  
  320. After command completion occurred, registers were:
  321. ER -- ST COUNT LBA_48 LH LM LL DV DC
  322. -- -- -- == -- == == == -- -- -- -- --
  323. 40 -- 51 00 fe 00 00 00 01 dd 10 40 00 Error: UNC at LBA = 0x0001dd10 = 122128
  324.  
  325. Commands leading to the command that caused the error were:
  326. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  327. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  328. 60 01 00 00 c8 00 00 00 01 dc c8 40 08 00:10:34.408 READ FPDMA QUEUED
  329. 60 01 00 00 c0 00 00 00 01 db c8 40 08 00:10:34.408 READ FPDMA QUEUED
  330. 60 01 00 00 b8 00 00 00 01 da c8 40 08 00:10:34.017 READ FPDMA QUEUED
  331. 60 01 00 00 b0 00 00 00 01 d9 c8 40 08 00:10:34.017 READ FPDMA QUEUED
  332. 60 01 00 00 a8 00 00 00 01 d8 c8 40 08 00:10:34.016 READ FPDMA QUEUED
  333.  
  334. Error 31 [6] occurred at disk power-on lifetime: 6735 hours (280 days + 15 hours)
  335. When the command that caused the error occurred, the device was active or idle.
  336.  
  337. After command completion occurred, registers were:
  338. ER -- ST COUNT LBA_48 LH LM LL DV DC
  339. -- -- -- == -- == == == -- -- -- -- --
  340. 40 -- 51 00 00 00 00 00 02 e6 30 40 00 Error: UNC at LBA = 0x0002e630 = 190000
  341.  
  342. Commands leading to the command that caused the error were:
  343. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  344. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  345. 60 01 00 00 80 00 00 00 02 e6 88 40 08 4d+13:21:05.583 READ FPDMA QUEUED
  346. 60 00 e0 00 78 00 00 00 02 e5 a8 40 08 4d+13:21:05.583 READ FPDMA QUEUED
  347. 60 01 00 00 70 00 00 00 02 e4 a8 40 08 4d+13:21:05.205 READ FPDMA QUEUED
  348. 60 01 00 00 68 00 00 00 02 e3 a8 40 08 4d+13:21:04.749 READ FPDMA QUEUED
  349. 60 00 e0 00 60 00 00 00 02 e2 c8 40 08 4d+13:21:04.748 READ FPDMA QUEUED
  350.  
  351. Error 30 [5] occurred at disk power-on lifetime: 6724 hours (280 days + 4 hours)
  352. When the command that caused the error occurred, the device was active or idle.
  353.  
  354. After command completion occurred, registers were:
  355. ER -- ST COUNT LBA_48 LH LM LL DV DC
  356. -- -- -- == -- == == == -- -- -- -- --
  357. 40 -- 51 00 00 00 00 00 02 e6 20 40 00 Error: UNC at LBA = 0x0002e620 = 189984
  358.  
  359. Commands leading to the command that caused the error were:
  360. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  361. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  362. 60 00 e0 00 50 00 00 00 02 e5 a8 40 08 4d+02:19:11.074 READ FPDMA QUEUED
  363. 60 01 00 00 48 00 00 00 02 e4 a8 40 08 4d+02:19:11.073 READ FPDMA QUEUED
  364. 60 01 00 00 40 00 00 00 02 e3 a8 40 08 4d+02:19:10.606 READ FPDMA QUEUED
  365. 60 00 e0 00 38 00 00 00 02 e2 c8 40 08 4d+02:19:10.606 READ FPDMA QUEUED
  366. 60 01 00 00 30 00 00 00 02 e1 c8 40 08 4d+02:19:10.604 READ FPDMA QUEUED
  367.  
  368. Error 29 [4] occurred at disk power-on lifetime: 6724 hours (280 days + 4 hours)
  369. When the command that caused the error occurred, the device was active or idle.
  370.  
  371. After command completion occurred, registers were:
  372. ER -- ST COUNT LBA_48 LH LM LL DV DC
  373. -- -- -- == -- == == == -- -- -- -- --
  374. 40 -- 51 00 00 00 00 00 01 d5 70 40 00 Error: UNC at LBA = 0x0001d570 = 120176
  375.  
  376. Commands leading to the command that caused the error were:
  377. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  378. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  379. 60 01 00 00 a0 00 00 00 01 d5 c8 40 08 4d+02:19:00.289 READ FPDMA QUEUED
  380. 60 01 00 00 98 00 00 00 01 d4 c8 40 08 4d+02:19:00.288 READ FPDMA QUEUED
  381. 60 01 00 00 90 00 00 00 01 d3 c8 40 08 4d+02:18:58.719 READ FPDMA QUEUED
  382. 60 01 00 00 88 00 00 00 01 d2 c8 40 08 4d+02:18:58.710 READ FPDMA QUEUED
  383. 61 01 00 00 18 00 00 00 01 cf c8 40 08 4d+02:18:56.247 WRITE FPDMA QUEUED
  384.  
  385. Error 28 [3] occurred at disk power-on lifetime: 6724 hours (280 days + 4 hours)
  386. When the command that caused the error occurred, the device was active or idle.
  387.  
  388. After command completion occurred, registers were:
  389. ER -- ST COUNT LBA_48 LH LM LL DV DC
  390. -- -- -- == -- == == == -- -- -- -- --
  391. 40 -- 51 00 00 00 00 00 01 d0 c0 40 00 Error: UNC at LBA = 0x0001d0c0 = 118976
  392.  
  393. Commands leading to the command that caused the error were:
  394. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  395. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  396. 60 01 00 00 a0 00 00 00 01 d0 c8 40 08 4d+02:18:52.871 READ FPDMA QUEUED
  397. 60 01 00 00 98 00 00 00 01 cf c8 40 08 4d+02:18:52.869 READ FPDMA QUEUED
  398. 60 01 00 00 90 00 00 00 01 ce c8 40 08 4d+02:18:52.414 READ FPDMA QUEUED
  399. 60 01 00 00 88 00 00 00 01 cd c8 40 08 4d+02:18:52.413 READ FPDMA QUEUED
  400. 60 01 00 00 80 00 00 00 01 cc c8 40 08 4d+02:18:52.035 READ FPDMA QUEUED
  401.  
  402. Error 27 [2] occurred at disk power-on lifetime: 6724 hours (280 days + 4 hours)
  403. When the command that caused the error occurred, the device was active or idle.
  404.  
  405. After command completion occurred, registers were:
  406. ER -- ST COUNT LBA_48 LH LM LL DV DC
  407. -- -- -- == -- == == == -- -- -- -- --
  408. 40 -- 51 00 00 00 00 00 01 c7 38 40 00 Error: UNC at LBA = 0x0001c738 = 116536
  409.  
  410. Commands leading to the command that caused the error were:
  411. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  412. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  413. 60 01 00 00 78 00 00 00 01 c6 c8 40 08 4d+02:18:44.018 READ FPDMA QUEUED
  414. 60 01 00 00 70 00 00 00 01 c5 c8 40 08 4d+02:18:44.018 READ FPDMA QUEUED
  415. 61 01 00 00 68 00 00 00 01 c2 c8 40 08 4d+02:18:43.991 WRITE FPDMA QUEUED
  416. 60 00 10 00 60 00 00 00 00 2b 80 40 08 4d+02:18:43.991 READ FPDMA QUEUED
  417. 61 00 10 00 58 00 01 d1 c0 76 10 40 08 4d+02:18:43.991 WRITE FPDMA QUEUED
  418.  
  419. Error 26 [1] occurred at disk power-on lifetime: 6724 hours (280 days + 4 hours)
  420. When the command that caused the error occurred, the device was active or idle.
  421.  
  422. After command completion occurred, registers were:
  423. ER -- ST COUNT LBA_48 LH LM LL DV DC
  424. -- -- -- == -- == == == -- -- -- -- --
  425. 40 -- 51 00 00 00 00 00 01 c3 18 40 00 Error: UNC at LBA = 0x0001c318 = 115480
  426.  
  427. Commands leading to the command that caused the error were:
  428. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  429. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  430. 60 01 00 00 68 00 00 00 01 c2 c8 40 08 4d+02:18:37.319 READ FPDMA QUEUED
  431. 60 01 00 00 60 00 00 00 01 c1 c8 40 08 4d+02:18:36.131 READ FPDMA QUEUED
  432. 60 01 00 00 58 00 00 00 01 c0 c8 40 08 4d+02:18:36.130 READ FPDMA QUEUED
  433. 60 01 00 00 50 00 00 00 01 bf c8 40 08 4d+02:18:36.129 READ FPDMA QUEUED
  434. 60 01 00 00 48 00 00 00 01 be c8 40 08 4d+02:18:36.117 READ FPDMA QUEUED
  435.  
  436. Error 25 [0] occurred at disk power-on lifetime: 6654 hours (277 days + 6 hours)
  437. When the command that caused the error occurred, the device was active or idle.
  438.  
  439. After command completion occurred, registers were:
  440. ER -- ST COUNT LBA_48 LH LM LL DV DC
  441. -- -- -- == -- == == == -- -- -- -- --
  442. 40 -- 51 00 00 00 00 00 02 ed 50 40 00 Error: WP at LBA = 0x0002ed50 = 191824
  443.  
  444. Commands leading to the command that caused the error were:
  445. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  446. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  447. 61 00 e0 00 e8 00 00 00 02 e5 a8 40 08 1d+03:56:18.834 WRITE FPDMA QUEUED
  448. 61 01 00 00 e0 00 00 00 02 e4 a8 40 08 1d+03:56:18.834 WRITE FPDMA QUEUED
  449. 61 01 00 00 d8 00 00 00 02 e3 a8 40 08 1d+03:56:18.833 WRITE FPDMA QUEUED
  450. 61 01 00 00 d0 00 00 00 02 e7 88 40 08 1d+03:56:18.833 WRITE FPDMA QUEUED
  451. 60 01 00 00 c8 00 00 00 02 ed 48 40 08 1d+03:56:18.833 READ FPDMA QUEUED
  452.  
  453. Error 24 [23] occurred at disk power-on lifetime: 6654 hours (277 days + 6 hours)
  454. When the command that caused the error occurred, the device was active or idle.
  455.  
  456. After command completion occurred, registers were:
  457. ER -- ST COUNT LBA_48 LH LM LL DV DC
  458. -- -- -- == -- == == == -- -- -- -- --
  459. 40 -- 51 00 00 00 00 00 02 e7 c8 40 00 Error: UNC at LBA = 0x0002e7c8 = 190408
  460.  
  461. Commands leading to the command that caused the error were:
  462. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  463. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  464. 60 01 00 00 70 00 00 00 02 e7 88 40 08 1d+03:56:08.811 READ FPDMA QUEUED
  465. 60 00 10 00 58 00 00 00 00 0a 10 40 08 1d+03:56:08.811 READ FPDMA QUEUED
  466. 60 01 00 00 50 00 00 00 02 e6 88 40 08 1d+03:56:08.811 READ FPDMA QUEUED
  467. ef 00 10 00 02 00 00 00 00 00 00 a0 08 1d+03:56:08.811 SET FEATURES [Enable SATA feature]
  468. 27 00 00 00 00 00 00 00 00 00 00 e0 08 1d+03:56:08.811 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  469.  
  470. Error 23 [22] occurred at disk power-on lifetime: 6654 hours (277 days + 6 hours)
  471. When the command that caused the error occurred, the device was active or idle.
  472.  
  473. After command completion occurred, registers were:
  474. ER -- ST COUNT LBA_48 LH LM LL DV DC
  475. -- -- -- == -- == == == -- -- -- -- --
  476. 40 -- 51 00 00 00 00 00 02 e5 c0 40 00 Error: WP at LBA = 0x0002e5c0 = 189888
  477.  
  478. Commands leading to the command that caused the error were:
  479. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  480. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  481. 61 00 10 00 c8 00 01 d1 c0 76 10 40 08 1d+03:56:05.407 WRITE FPDMA QUEUED
  482. 61 00 10 00 c0 00 01 d1 c0 74 10 40 08 1d+03:56:05.395 WRITE FPDMA QUEUED
  483. 60 01 00 00 b0 00 00 00 02 e6 88 40 08 1d+03:56:05.395 READ FPDMA QUEUED
  484. 60 00 10 00 98 00 01 d1 c0 76 10 40 08 1d+03:56:05.395 READ FPDMA QUEUED
  485. 60 00 e0 00 90 00 00 00 02 e5 a8 40 08 1d+03:56:05.394 READ FPDMA QUEUED
  486.  
  487. Error 22 [21] occurred at disk power-on lifetime: 6654 hours (277 days + 6 hours)
  488. When the command that caused the error occurred, the device was active or idle.
  489.  
  490. After command completion occurred, registers were:
  491. ER -- ST COUNT LBA_48 LH LM LL DV DC
  492. -- -- -- == -- == == == -- -- -- -- --
  493. 40 -- 51 00 00 00 00 00 02 e4 f0 40 00 Error: UNC at LBA = 0x0002e4f0 = 189680
  494.  
  495. Commands leading to the command that caused the error were:
  496. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  497. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  498. 60 00 10 00 00 00 01 d1 c0 76 10 40 08 1d+03:56:02.001 READ FPDMA QUEUED
  499. 60 00 10 00 f0 00 01 d1 c0 74 10 40 08 1d+03:56:02.001 READ FPDMA QUEUED
  500. 60 00 10 00 e8 00 00 00 00 0a 10 40 08 1d+03:56:02.001 READ FPDMA QUEUED
  501. 60 00 e0 00 d8 00 00 00 02 e5 a8 40 08 1d+03:56:01.343 READ FPDMA QUEUED
  502. 60 01 00 00 c0 00 00 00 02 e4 a8 40 08 1d+03:56:01.343 READ FPDMA QUEUED
  503.  
  504. Error 21 [20] occurred at disk power-on lifetime: 6654 hours (277 days + 6 hours)
  505. When the command that caused the error occurred, the device was active or idle.
  506.  
  507. After command completion occurred, registers were:
  508. ER -- ST COUNT LBA_48 LH LM LL DV DC
  509. -- -- -- == -- == == == -- -- -- -- --
  510. 40 -- 51 00 00 00 00 00 02 e4 60 40 00 Error: UNC at LBA = 0x0002e460 = 189536
  511.  
  512. Commands leading to the command that caused the error were:
  513. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  514. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  515. 60 01 00 00 a0 00 00 00 02 e3 a8 40 08 1d+03:55:57.589 READ FPDMA QUEUED
  516. 60 00 e0 00 98 00 00 00 02 e2 c8 40 08 1d+03:55:57.589 READ FPDMA QUEUED
  517. 60 01 00 00 90 00 00 00 02 e1 c8 40 08 1d+03:55:57.588 READ FPDMA QUEUED
  518. 60 01 00 00 88 00 00 00 02 e0 c8 40 08 1d+03:55:57.587 READ FPDMA QUEUED
  519. 60 01 00 00 80 00 00 00 02 df c8 40 08 1d+03:55:57.585 READ FPDMA QUEUED
  520.  
  521. Error 20 [19] occurred at disk power-on lifetime: 6654 hours (277 days + 6 hours)
  522. When the command that caused the error occurred, the device was active or idle.
  523.  
  524. After command completion occurred, registers were:
  525. ER -- ST COUNT LBA_48 LH LM LL DV DC
  526. -- -- -- == -- == == == -- -- -- -- --
  527. 40 -- 51 00 00 00 00 00 02 d6 b0 40 00 Error: UNC at LBA = 0x0002d6b0 = 186032
  528.  
  529. Commands leading to the command that caused the error were:
  530. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  531. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  532. 60 01 00 00 50 00 00 00 02 d5 c8 40 08 1d+03:55:53.760 READ FPDMA QUEUED
  533. 60 01 00 00 48 00 00 00 02 d4 c8 40 08 1d+03:55:53.759 READ FPDMA QUEUED
  534. 60 01 00 00 40 00 00 00 02 d3 c8 40 08 1d+03:55:53.758 READ FPDMA QUEUED
  535. 60 01 00 00 38 00 00 00 02 d2 c8 40 08 1d+03:55:53.758 READ FPDMA QUEUED
  536. 60 01 00 00 30 00 00 00 02 d1 c8 40 08 1d+03:55:53.757 READ FPDMA QUEUED
  537.  
  538. SMART Extended Self-test Log Version: 1 (1 sectors)
  539. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  540. # 1 Extended offline Completed without error 00% 13260 -
  541. # 2 Conveyance offline Completed without error 00% 13248 -
  542. # 3 Short offline Completed without error 00% 13237 -
  543. # 4 Extended offline Completed without error 00% 13 -
  544. # 5 Conveyance offline Completed without error 00% 1 -
  545. # 6 Short offline Completed without error 00% 1 -
  546.  
  547. SMART Selective self-test log data structure revision number 1
  548. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  549. 1 0 0 Not_testing
  550. 2 0 0 Not_testing
  551. 3 0 0 Not_testing
  552. 4 0 0 Not_testing
  553. 5 0 0 Not_testing
  554. Selective self-test flags (0x0):
  555. After scanning selected spans, do NOT read-scan remainder of disk.
  556. If Selective self-test is pending on power-up, resume after 0 minute delay.
  557.  
  558. SCT Status Version: 3
  559. SCT Version (vendor specific): 258 (0x0102)
  560. SCT Support Level: 1
  561. Device State: Active (0)
  562. Current Temperature: 35 Celsius
  563. Power Cycle Min/Max Temperature: 29/37 Celsius
  564. Lifetime Min/Max Temperature: 3/46 Celsius
  565. Under/Over Temperature Limit Count: 0/0
  566. Vendor specific:
  567. 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  568. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  569.  
  570. SCT Temperature History Version: 2
  571. Temperature Sampling Period: 1 minute
  572. Temperature Logging Interval: 1 minute
  573. Min/Max recommended Temperature: 0/60 Celsius
  574. Min/Max Temperature Limit: -41/85 Celsius
  575. Temperature History Size (Index): 478 (131)
  576.  
  577. Index Estimated Time Temperature Celsius
  578. 132 2018-10-18 00:57 33 **************
  579. ... ..(116 skipped). .. **************
  580. 249 2018-10-18 02:54 33 **************
  581. 250 2018-10-18 02:55 34 ***************
  582. 251 2018-10-18 02:56 34 ***************
  583. 252 2018-10-18 02:57 34 ***************
  584. 253 2018-10-18 02:58 35 ****************
  585. ... ..( 17 skipped). .. ****************
  586. 271 2018-10-18 03:16 35 ****************
  587. 272 2018-10-18 03:17 34 ***************
  588. ... ..(131 skipped). .. ***************
  589. 404 2018-10-18 05:29 34 ***************
  590. 405 2018-10-18 05:30 33 **************
  591. ... ..(203 skipped). .. **************
  592. 131 2018-10-18 08:54 33 **************
  593.  
  594. SCT Error Recovery Control:
  595. Read: 70 (7.0 seconds)
  596. Write: 70 (7.0 seconds)
  597.  
  598. Device Statistics (GP/SMART Log 0x04) not supported
  599.  
  600. SATA Phy Event Counters (GP Log 0x11)
  601. ID Size Value Description
  602. 0x0001 2 0 Command failed due to ICRC error
  603. 0x0002 2 0 R_ERR response for data FIS
  604. 0x0003 2 0 R_ERR response for device-to-host data FIS
  605. 0x0004 2 0 R_ERR response for host-to-device data FIS
  606. 0x0005 2 0 R_ERR response for non-data FIS
  607. 0x0006 2 0 R_ERR response for device-to-host non-data FIS
  608. 0x0007 2 0 R_ERR response for host-to-device non-data FIS
  609. 0x0008 2 0 Device-to-host non-data FIS retries
  610. 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
  611. 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
  612. 0x000b 2 0 CRC errors within host-to-device FIS
  613. 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
  614. 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
  615. 0x8000 4 1466770 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!