API tools faq
paste
Guest User

Turris Omnia boot log with "Re-flash router" procedure fail

a guest
Sep 15th, 2018
222
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 47.57 KB | None | 0 0
raw download clone embed print report
  1.  
  2. U-Boot SPL 2015.10-rc2 (Aug 18 2016 - 20:43:35)
  3. High speed PHY - Version: 2.0
  4. SERDES0 card detect: PEX
  5.  
  6. Initialize Turris board topology
  7. Detected Device ID 6820
  8. board SerDes lanes topology details:
  9. | Lane # | Speed | Type |
  10. --------------------------------
  11. | 0 | 5 | PCIe0 |
  12. | 1 | 5 | USB3 HOST0 |
  13. | 2 | 5 | PCIe1 |
  14. | 3 | 5 | USB3 HOST1 |
  15. | 4 | 5 | PCIe2 |
  16. | 5 | 0 | SGMII2 |
  17. --------------------------------
  18. poll_op_execute: TIMEOUT
  19. :** Link is Gen1, check the EP capability
  20. PCIe, Idx 0: remains Gen1
  21. :** Link is Gen1, check the EP capability
  22. PCIe, Idx 1: remains Gen1
  23. PCIe, Idx 2: detected no link
  24. High speed PHY - Ended Successfully
  25. DDR3 Training Sequence - Ver TIP-1.29.0
  26. Memory config in EEPROM: 0x01
  27. DDR3 Training Sequence - Switching XBAR Window to FastPath Window
  28. DDR3 Training Sequence - Ended Successfully
  29.  
  30.  
  31.  
  32. U-Boot 2015.10-rc2 (Aug 18 2016 - 20:43:35 +0200), Build: jenkins-omnia-master-23
  33.  
  34.  
  35. SoC: MV88F6820-A0
  36.  
  37. Watchdog enabled
  38.  
  39. I2C: ready
  40.  
  41. SPI: ready
  42.  
  43. DRAM: 1 GiB (ECC not enabled)
  44.  
  45. Enabling Armada 385 watchdog.
  46.  
  47. Disabling MCU startup watchdog.
  48.  
  49. Regdomain set to **
  50.  
  51. MMC: mv_sdh: 0
  52.  
  53. SF: Detected S25FL164K with page size 256 Bytes, erase size 64 KiB, total 8 MiB
  54.  
  55. *** Warning - bad CRC, using default environment
  56.  
  57.  
  58. PCI:
  59.  
  60. 00:01.0 - 168c:002e - Network controller
  61.  
  62. PCI:
  63.  
  64. 01:00.0 - 11ab:6820 - Memory controller
  65.  
  66. 01:01.0 - 168c:003c - Network controller
  67.  
  68. Model: Marvell Armada 385 GP
  69.  
  70. Board: Turris Omnia SN: XXXXXXXXXXXXXXXX
  71.  
  72. Regdomain set to **
  73.  
  74. SCSI: MVEBU SATA INIT
  75.  
  76. SATA link 0 timeout.
  77.  
  78. SATA link 1 timeout.
  79.  
  80. AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  81.  
  82. flags: 64bit ncq led only pmp fbss pio slum part sxs
  83.  
  84. Net: neta2
  85.  
  86. Hit any key to stop autoboot: 3  2  1  0
  87.  
  88. Setting bus to 1
  89.  
  90. BOOT RESCUE
  91.  
  92. SF: Detected S25FL164K with page size 256 Bytes, erase size 64 KiB, total 8 MiB
  93.  
  94. device 0 offset 0x100000, size 0x700000
  95.  
  96. SF: 7340032 bytes @ 0x100000 Read: OK
  97.  
  98. Kernel image @ 0x1000000 [ 0x000000 - 0x689b30 ]
  99.  
  100.  
  101. Starting kernel ...
  102.  
  103.  
  104. [ 0.000000] Booting Linux on physical CPU 0x0
  105. [ 0.000000] Linux version 4.4.13-369554f06f5670aea91212be2c6d6e58-7 (beast@slave01) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49274) ) #4 SMP Thu Aug 18 20:46:34 CEST 2016
  106. [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
  107. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  108. [ 0.000000] Machine model: Turris Omnia
  109. [ 0.000000] Memory policy: Data cache writealloc
  110. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef7d1000 s13952 r8192 d22912 u45056
  111. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608
  112. [ 0.000000] Kernel command line: earlyprintk console=ttyS0,115200 rootfstype=btrfs rootdelay=2 root=b301 rootflags=subvol=@,commit=5 rw omniarescue=3
  113. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  114. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  115. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  116. [ 0.000000] Memory: 1028732K/1048576K available (4730K kernel code, 144K rwdata, 676K rodata, 4912K init, 182K bss, 19844K reserved, 0K cma-reserved, 262144K highmem)
  117. [ 0.000000] Virtual kernel memory layout:
  118. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  119. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  120. [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
  121. [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  122. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  123. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  124. [ 0.000000] .text : 0xc0008000 - 0xc054fe6c (5408 kB)
  125. [ 0.000000] .init : 0xc0550000 - 0xc0a1c000 (4912 kB)
  126. [ 0.000000] .data : 0xc0a1c000 - 0xc0a40274 ( 145 kB)
  127. [ 0.000000] .bss : 0xc0a40274 - 0xc0a6dc38 ( 183 kB)
  128. [ 0.000000] Hierarchical RCU implementation.
  129. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  130. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  131. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  132. [ 0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
  133. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  134. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  135. [ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
  136. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  137. [ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
  138. [ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
  139. [ 0.000000] Switching to timer-based delay loop, resolution 40ns
  140. [ 0.000003] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
  141. [ 0.000009] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
  142. [ 0.000148] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
  143. [ 0.000155] pid_max: default: 32768 minimum: 301
  144. [ 0.000203] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  145. [ 0.000208] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  146. [ 0.000418] CPU: Testing write buffer coherency: ok
  147. [ 0.000522] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  148. [ 0.000534] Setting up static identity map for 0x8280 - 0x82d8
  149. [ 0.000611] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
  150. [ 0.000691] mvebu-pmsu: Initializing Power Management Service Unit
  151. [ 0.001114] Booting CPU 1
  152. [ 0.001280] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  153. [ 0.001310] Brought up 2 CPUs
  154. [ 0.001316] SMP: Total of 2 processors activated (100.00 BogoMIPS).
  155. [ 0.001319] CPU: All CPU(s) started in SVC mode.
  156. [ 0.002990] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  157. [ 0.003045] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  158. [ 0.003062] xor: measuring software checksum speed
  159. [ 0.099898] arm4regs : 2788.000 MB/sec
  160. [ 0.199900] 8regs : 1859.200 MB/sec
  161. [ 0.299899] 32regs : 1669.200 MB/sec
  162. [ 0.299902] xor: using function: arm4regs (2788.000 MB/sec)
  163. [ 0.299908] pinctrl core: initialized pinctrl subsystem
  164. [ 0.300235] NET: Registered protocol family 16
  165. [ 0.300731] DMA: preallocated 256 KiB pool for atomic coherent allocations
  166. [ 0.329922] cpuidle: using governor ladder
  167. [ 0.332549] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
  168. [ 0.332558] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
  169. [ 0.530192] raid6: int32x1 gen() 155 MB/s
  170. [ 0.699909] raid6: int32x1 xor() 202 MB/s
  171. [ 0.869910] raid6: int32x2 gen() 255 MB/s
  172. [ 1.039908] raid6: int32x2 xor() 229 MB/s
  173. [ 1.209982] raid6: int32x4 gen() 284 MB/s
  174. [ 1.379976] raid6: int32x4 xor() 190 MB/s
  175. [ 1.549973] raid6: int32x8 gen() 371 MB/s
  176. [ 1.719939] raid6: int32x8 xor() 214 MB/s
  177. [ 1.719943] raid6: using algorithm int32x8 gen() 371 MB/s
  178. [ 1.719945] raid6: .... xor() 214 MB/s, rmw enabled
  179. [ 1.719948] raid6: using intx1 recovery algorithm
  180. [ 1.720527] clocksource: Switched to clocksource armada_370_xp_clocksource
  181. [ 1.720881] NET: Registered protocol family 2
  182. [ 1.721116] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  183. [ 1.721155] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  184. [ 1.721215] TCP: Hash tables configured (established 8192 bind 8192)
  185. [ 1.721250] UDP hash table entries: 512 (order: 2, 16384 bytes)
  186. [ 1.721272] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  187. [ 1.721376] NET: Registered protocol family 1
  188. [ 2.855299] futex hash table entries: 512 (order: 3, 32768 bytes)
  189. [ 2.855611] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  190. [ 2.855616] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  191. [ 2.855922] bounce: pool size: 64 pages
  192. [ 2.855952] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  193. [ 2.855957] io scheduler noop registered
  194. [ 2.855961] io scheduler deadline registered (default)
  195. [ 2.856324] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
  196. [ 2.856646] irq: Cannot allocate irq_descs @ IRQ48, assuming pre-allocated
  197. [ 2.856795] irq: Cannot allocate irq_descs @ IRQ80, assuming pre-allocated
  198. [ 2.857117] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
  199. [ 2.857125] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
  200. [ 2.857131] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
  201. [ 2.857136] pci_bus 0000:00: root bus resource [bus 00-ff]
  202. [ 2.857429] PCI: bus0: Fast back to back transfers disabled
  203. [ 2.857435] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  204. [ 2.857442] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  205. [ 2.857447] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  206. [ 2.857709] PCI: bus1: Fast back to back transfers disabled
  207. [ 2.857968] PCI: bus2: Fast back to back transfers disabled
  208. [ 2.858027] PCI: bus3: Fast back to back transfers enabled
  209. [ 2.858088] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
  210. [ 2.858095] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0200000-0xe04fffff]
  211. [ 2.858102] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit]
  212. [ 2.858113] pci 0000:00:01.0: PCI bridge to [bus 01]
  213. [ 2.858119] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
  214. [ 2.858126] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0200000-0xe03fffff 64bit]
  215. [ 2.858137] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0400000-0xe040ffff pref]
  216. [ 2.858142] pci 0000:00:02.0: PCI bridge to [bus 02]
  217. [ 2.858147] pci 0000:00:02.0: bridge window [mem 0xe0200000-0xe04fffff]
  218. [ 2.858153] pci 0000:00:03.0: PCI bridge to [bus 03]
  219. [ 2.858261] mv_xor f1060800.xor: Marvell shared XOR driver
  220. [ 2.890863] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
  221. [ 2.890955] mv_xor f1060900.xor: Marvell shared XOR driver
  222. [ 2.930802] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
  223. [ 2.930943] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  224. [ 2.931238] console [ttyS0] disabled
  225. [ 2.951313] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 15625000) is a 16550A
  226. [ 3.706139] console [ttyS0] enabled
  227. [ 3.729855] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 23, base_baud = 15625000) is a 16550A
  228. [ 3.739549] m25p80 spi0.0: s25fl164k (8192 Kbytes)
  229. [ 3.745813] 2 ofpart partitions found on MTD device spi0.0
  230. [ 3.751324] Creating 2 MTD partitions on "spi0.0":
  231. [ 3.756128] 0x000000000000-0x000000100000 : "U-Boot"
  232. [ 3.761438] 0x000000100000-0x000000800000 : "Rescue system"
  233. [ 3.767693] libphy: Fixed MDIO Bus: probed
  234. [ 3.772023] libphy: orion_mdio_bus: probed
  235. [ 3.778112] mvneta f1030000.ethernet eth0: Using hardware mac address d8:58:d7:00:4c:35
  236. [ 3.786903] mvneta f1034000.ethernet eth1: Using hardware mac address d8:58:d7:00:4c:36
  237. [ 3.795717] mvneta f1070000.ethernet eth2: Using hardware mac address d8:58:d7:00:4c:37
  238. [ 3.803965] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
  239. [ 4.320633] i2c /dev entries driver
  240. [ 4.324870] at24 1-0054: 8192 byte 24c64 EEPROM, writable, 1 bytes/write
  241. [ 4.331645] i2c i2c-0: Added multiplexed i2c bus 1
  242. [ 4.336512] i2c i2c-0: Added multiplexed i2c bus 2
  243. [ 4.341391] i2c i2c-0: Added multiplexed i2c bus 3
  244. [ 4.346254] i2c i2c-0: Added multiplexed i2c bus 4
  245. [ 4.351126] i2c i2c-0: Added multiplexed i2c bus 5
  246. [ 4.355987] i2c i2c-0: Added multiplexed i2c bus 6
  247. [ 4.360857] i2c i2c-0: Added multiplexed i2c bus 7
  248. [ 4.365749] i2c i2c-0: Added multiplexed i2c bus 8
  249. [ 4.370559] pca954x 0-0070: registered 8 multiplexed busses for I2C mux pca9547
  250. [ 4.378015] sdhci: Secure Digital Host Controller Interface driver
  251. [ 4.384215] sdhci: Copyright(c) Pierre Ossman
  252. [ 4.388728] sdhci-pxav3 f10d8000.sdhci: No vmmc regulator found
  253. [ 4.394671] sdhci-pxav3 f10d8000.sdhci: No vqmmc regulator found
  254. [ 4.440535] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
  255. [ 4.447978] sdhci-pltfm: SDHCI platform and OF driver helper
  256. [ 4.462934] NET: Registered protocol family 10
  257. [ 4.467849] NET: Registered protocol family 17
  258. [ 4.472326] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  259. [ 4.484966] 8021q: 802.1Q VLAN Support v1.8
  260. [ 4.489205] Registering SWP/SWPB emulation handler
  261. [ 4.494572] Btrfs loaded
  262. [ 4.497671] mvsw61xx 10.mvsw61xx: Found MV88E6176 at f1072004.mdio-mi:10
  263. [ 4.504426] mvsw61xx 10.mvsw61xx: Using indirect addressing
  264. [ 4.504516] mmc0: MAN_BKOPS_EN bit is not set
  265. [ 4.507544] mmc0: new high speed MMC card at address 0001
  266. [ 4.510598] mmcblk0: mmc0:0001 H8G4a’ 7.28 GiB
  267. [ 4.510671] mmcblk0boot0: mmc0:0001 H8G4a’ partition 1 4.00 MiB
  268. [ 4.510740] mmcblk0boot1: mmc0:0001 H8G4a’ partition 2 4.00 MiB
  269. [ 4.510813] mmcblk0rpmb: mmc0:0001 H8G4a’ partition 3 4.00 MiB
  270. [ 4.511452] mmcblk0: p1
  271. [ 4.585562] armada38x-rtc f10a3800.rtc: setting system clock to 2018-09-15 15:01:35 UTC (1537023695)
  272. [ 4.597432] Freeing unused kernel memory: 4912K (c0550000 - c0a1c000)
  273. modprobe grace
  274. modprobe libata
  275. [ 4.670156] SCSI subsystem initialized
  276. modprobe async_raid6_rec[ 4.682153] async_tx: api initialized (async)
  277. ov
  278. modprobe nls_base
  279. modprobe sha256_generic
  280. modprobe mac8021[ 4.692070] Loading modules backported from Linux version master-2015-12-03-0-g1677f62
  281. 1
  282. [ 4.700425] Backport generated by backports.git backports-20151120-0-g906a6b3
  283. [ 4.719910] cfg80211: World regulatory domain updated:
  284. [ 4.725076] cfg80211: DFS Master region: unset
  285. [ 4.729440] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  286. [ 4.739231] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  287. [ 4.747259] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  288. [ 4.756677] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  289. [ 4.764707] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  290. [ 4.774220] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  291. [ 4.783727] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  292. [ 4.791844] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  293. [ 4.799866] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  294. modprobe fuse
  295. [ 4.812276] fuse init (API version 7.23)
  296. modprobe dm-region-hash
  297. [ 4.821550] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [email protected]
  298. modprobe xfs
  299. [ 4.897532] SGI XFS with security attributes, no debug enabled
  300. modprobe orion_wdt
  301. [ 4.905796] orion_wdt: Initial timeout 171 sec
  302. modprobe md4
  303. modprobe mvsdio
  304. modprobe cifs
  305. modprobe cryptodev
  306. [ 4.930810] cryptodev: driver 1.8 loaded.
  307. modprobe async_xor
  308. modprobe ahci_mvebu
  309. [ 4.940194] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  310. [ 4.949307] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  311. [ 4.958759] scsi host0: ahci-mvebu
  312. [ 4.962348] scsi host1: ahci-mvebu
  313. [ 4.965850] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 44
  314. [ 4.973809] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 44
  315. [ 5.330527] ata1: SATA link down (SStatus 0 SControl 300)
  316. [ 5.335956] ata2: SATA link down (SStatus 0 SControl 300)
  317. modprobe marvell-cesa
  318. [ 5.344640] marvell-cesa f1090000.crypto: CESA device successfully registered
  319. modprobe libcrc32c
  320. modprobe fat
  321. modprobe dm-crypt
  322. modprobe algif_hash
  323. [ 5.360586] NET: Registered protocol family 38
  324. modprobe sunrpc
  325. [ 5.377479] RPC: Registered named UNIX socket transport module.
  326. [ 5.383438] RPC: Registered udp transport module.
  327. [ 5.388151] RPC: Registered tcp transport module.
  328. [ 5.392880] RPC: Registered tcp NFSv4.1 backchannel transport module.
  329. modprobe nfs
  330. modprobe af_alg
  331. modprobe algif_skcipher
  332. modprobe dm-mod
  333. modprobe nls_utf8
  334. modprobe vfat
  335. modprobe nfsv3
  336. modprobe raid1
  337. [ 5.426379] md: raid1 personality registered for level 1
  338. modprobe sd_mod
  339. modprobe loop
  340. [ 5.438680] loop: module loaded
  341. modprobe ahci_platform
  342. modprobe libahci_platform
  343. modprobe md5
  344. modprobe multipath
  345. [ 5.449630] md: multipath personality registered for level -4
  346. modprobe usb-storage
  347. [ 5.465200] usbcore: registered new interface driver usbfs
  348. [ 5.470768] usbcore: registered new interface driver hub
  349. [ 5.476126] usbcore: registered new device driver usb
  350. [ 5.482386] usbcore: registered new interface driver usb-storage
  351. modprobe nls_cp437
  352. modprobe des_generic
  353. modprobe lockd
  354. modprobe usb-common
  355. modprobe hwmon
  356. modprobe seqiv
  357. modprobe async_pq
  358. modprobe armada_thermal
  359. modprobe dm-mirror
  360. modprobe ehci-orion
  361. [ 5.519774] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  362. [ 5.526641] ehci-orion: EHCI orion driver
  363. [ 5.530799] orion-ehci f1058000.usb: EHCI Host Controller
  364. [ 5.536221] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
  365. [ 5.543900] orion-ehci f1058000.usb: irq 39, io mem 0xf1058000
  366. [ 5.560534] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
  367. [ 5.566718] hub 1-0:1.0: USB hub found
  368. [ 5.570489] hub 1-0:1.0: 1 port detected
  369. modprobe gf128mul
  370. modprobe cbc
  371. modprobe cfg80211
  372. modprobe thermal_sys
  373. modprobe xhci-pci
  374. modprobe async_memcpy
  375. modprobe hmac
  376. modprobe authenc
  377. modprobe md-mod
  378. modprobe sha512_generic
  379. modprobe dm-log
  380. modprobe xts
  381. modprobe ehci-hcd
  382. modprobe usbcore
  383. modprobe aead
  384. modprobe crypto_null
  385. modprobe ath
  386. modprobe linear
  387. [ 5.609928] md: linear personality registered for level -1
  388. modprobe raid10
  389. [ 5.618336] md: raid10 personality registered for level 10
  390. modprobe libahci
  391. modprobe raid0
  392. [ 5.627611] md: raid0 personality registered for level 0
  393. modprobe compat
  394. modprobe xhci-hcd
  395. modprobe xhci-plat-hcd
  396. [ 5.638309] xhci-hcd f10f0000.usb3: xHCI Host Controller
  397. [ 5.643873] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
  398. [ 5.651501] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
  399. [ 5.660065] xhci-hcd f10f0000.usb3: irq 46, io mem 0xf10f0000
  400. [ 5.666112] hub 2-0:1.0: USB hub found
  401. [ 5.669885] hub 2-0:1.0: 1 port detected
  402. [ 5.673957] xhci-hcd f10f0000.usb3: xHCI Host Controller
  403. [ 5.679286] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
  404. [ 5.686869] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
  405. [ 5.695216] hub 3-0:1.0: USB hub found
  406. [ 5.698986] hub 3-0:1.0: 1 port detected
  407. [ 5.703088] xhci-hcd f10f8000.usb3: xHCI Host Controller
  408. [ 5.708420] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
  409. [ 5.716033] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
  410. [ 5.724612] xhci-hcd f10f8000.usb3: irq 47, io mem 0xf10f8000
  411. [ 5.730630] hub 4-0:1.0: USB hub found
  412. [ 5.734402] hub 4-0:1.0: 1 port detected
  413. [ 5.738426] xhci-hcd f10f8000.usb3: xHCI Host Controller
  414. [ 5.743775] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
  415. [ 5.751320] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
  416. [ 5.759641] hub 5-0:1.0: USB hub found
  417. [ 5.763432] hub 5-0:1.0: 1 port detected
  418. modprobe ehci-platform
  419. [ 5.769689] ehci-platform: EHCI generic platform driver
  420. modprobe exportfs
  421. modprobe async_tx
  422. modprobe block2mtd
  423. modprobe ecb
  424. modprobe exfat
  425. [ 5.786440] exFAT: Version 1.2.9
  426. modprobe raid456
  427. [ 5.795605] md: raid6 personality registered for level 6
  428. [ 5.800973] md: raid5 personality registered for level 5
  429. [ 5.806296] md: raid4 personality registered for level 4
  430. modprobe scsi_mod
  431. MODE=3
  432. Mode: Reflash...
  433. [ 5.990532] usb 2-1: new high-speed USB device number 2 using xhci-hcd
  434. [ 11.110541] usb 2-1: device descriptor read/64, error -110
  435. [ 11.361071] usb-storage 2-1:1.0: USB Mass Storage device detected
  436. [ 11.367301] scsi host2: usb-storage 2-1:1.0
  437. [ 12.370794] scsi 2:0:0:0: Direct-Access General UDisk 5.00 PQ: 0 ANSI: 2
  438. [ 12.379337] sd 2:0:0:0: [sda] 7782400 512-byte logical blocks: (3.98 GB/3.71 GiB)
  439. [ 12.386969] sd 2:0:0:0: [sda] Write Protect is off
  440. [ 12.391908] sd 2:0:0:0: [sda] No Caching mode page found
  441. [ 12.397233] sd 2:0:0:0: [sda] Assuming drive cache: write through
  442. [ 12.455174] sd 2:0:0:0: [sda] Attached SCSI removable disk
  443. No medkit image found. Exit to shell.
  444. Doing sysrq rebo[ 16.105431] sysrq: SysRq : ot as busybox onChanging Loglevel
  445. e doesn't work
  446. [ 16.111290] sysrq: Loglevel set to 0
  447. [
  448. U-Boot SPL 2015.10-rc2 (Aug 18 2016 - 20:43:35)
  449. High speed PHY - Version: 2.0
  450. SERDES0 card detect: PEX
  451.  
  452. Initialize Turris board topology
  453. Detected Device ID 6820
  454. board SerDes lanes topology details:
  455. | Lane # | Speed | Type |
  456. --------------------------------
  457. | 0 | 5 | PCIe0 |
  458. | 1 | 5 | USB3 HOST0 |
  459. | 2 | 5 | PCIe1 |
  460. | 3 | 5 | USB3 HOST1 |
  461. | 4 | 5 | PCIe2 |
  462. | 5 | 0 | SGMII2 |
  463. --------------------------------
  464. poll_op_execute: TIMEOUT
  465. :** Link is Gen1, check the EP capability
  466. PCIe, Idx 0: remains Gen1
  467. :** Link is Gen1, check the EP capability
  468. PCIe, Idx 1: remains Gen1
  469. PCIe, Idx 2: detected no link
  470. High speed PHY - Ended Successfully
  471. DDR3 Training Sequence - Ver TIP-1.29.0
  472. Memory config in EEPROM: 0x01
  473. DDR3 Training Sequence - Switching XBAR Window to FastPath Window
  474. DDR3 Training Sequence - Ended Successfully
  475.  
  476.  
  477.  
  478. U-Boot 2015.10-rc2 (Aug 18 2016 - 20:43:35 +0200), Build: jenkins-omnia-master-23
  479.  
  480.  
  481. SoC: MV88F6820-A0
  482.  
  483. Watchdog enabled
  484.  
  485. I2C: ready
  486.  
  487. SPI: ready
  488.  
  489. DRAM: 1 GiB (ECC not enabled)
  490.  
  491. Enabling Armada 385 watchdog.
  492.  
  493. Disabling MCU startup watchdog.
  494.  
  495. Regdomain set to **
  496.  
  497. MMC: mv_sdh: 0
  498.  
  499. SF: Detected S25FL164K with page size 256 Bytes, erase size 64 KiB, total 8 MiB
  500.  
  501. *** Warning - bad CRC, using default environment
  502.  
  503.  
  504. PCI:
  505.  
  506. 00:01.0 - 168c:002e - Network controller
  507.  
  508. PCI:
  509.  
  510. 01:00.0 - 11ab:6820 - Memory controller
  511.  
  512. 01:01.0 - 168c:003c - Network controller
  513.  
  514. Model: Marvell Armada 385 GP
  515.  
  516. Board: Turris Omnia SN: XXXXXXXXXXXXXXXX
  517.  
  518. Regdomain set to **
  519.  
  520. SCSI: MVEBU SATA INIT
  521.  
  522. SATA link 0 timeout.
  523.  
  524. SATA link 1 timeout.
  525.  
  526. AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  527.  
  528. flags: 64bit ncq led only pmp fbss pio slum part sxs
  529.  
  530. Net: neta2
  531.  
  532. Hit any key to stop autoboot: 3  2  1  0
  533.  
  534. Setting bus to 1
  535.  
  536. BOOT eMMC FS
  537.  
  538. BtrFS init: Max node or leaf size 4096
  539.  
  540. 2422192 bytes read in 344 ms (6.7 MiB/s)
  541.  
  542. BtrFS init: Max node or leaf size 4096
  543.  
  544. 16772 bytes read in 171 ms (95.7 KiB/s)
  545.  
  546. Kernel image @ 0x1000000 [ 0x000000 - 0x24f5b0 ]
  547.  
  548. ## Flattened Device Tree blob at 02000000
  549.  
  550. Booting using the fdt blob at 0x2000000
  551.  
  552. Loading Device Tree to 0fff8000, end 0ffff183 ... OK
  553.  
  554.  
  555. Starting kernel ...
  556.  
  557.  
  558. [ 0.000000] Booting Linux on physical CPU 0x0
  559. [ 0.000000] Initializing cgroup subsys cpuset
  560. [ 0.000000] Initializing cgroup subsys cpu
  561. [ 0.000000] Initializing cgroup subsys cpuacct
  562. [ 0.000000] Linux version 4.4.13-05df79f63527051ea0071350f86faf76-7 (beast@slave01) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49274) ) #1 SMP Mon Sep 5 13:01:10 CEST 2016
  563. [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
  564. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  565. [ 0.000000] Machine model: Turris Omnia
  566. [ 0.000000] Memory policy: Data cache writealloc
  567. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef6d1000 s13696 r8192 d23168 u45056
  568. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260416
  569. [ 0.000000] Kernel command line: earlyprintk console=ttyS0,115200 rootfstype=btrfs rootdelay=2 root=b301 rootflags=subvol=@,commit=5 rw cfg80211.freg=**
  570. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  571. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  572. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  573. [ 0.000000] Memory: 1031400K/1048576K available (5074K kernel code, 167K rwdata, 1248K rodata, 260K init, 203K bss, 17176K reserved, 0K cma-reserved, 262144K highmem)
  574. [ 0.000000] Virtual kernel memory layout:
  575. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  576. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  577. [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
  578. [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  579. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  580. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  581. [ 0.000000] .text : 0xc0008000 - 0xc0634e6c (6324 kB)
  582. [ 0.000000] .init : 0xc0635000 - 0xc0676000 ( 260 kB)
  583. [ 0.000000] .data : 0xc0676000 - 0xc069fcc4 ( 168 kB)
  584. [ 0.000000] .bss : 0xc069fcc4 - 0xc06d2cbc ( 204 kB)
  585. [ 0.000000] Hierarchical RCU implementation.
  586. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  587. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  588. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  589. [ 0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
  590. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  591. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  592. [ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
  593. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  594. [ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
  595. [ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
  596. [ 0.000000] Switching to timer-based delay loop, resolution 40ns
  597. [ 0.000003] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
  598. [ 0.000010] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
  599. [ 0.000153] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
  600. [ 0.000160] pid_max: default: 32768 minimum: 301
  601. [ 0.000212] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  602. [ 0.000217] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  603. [ 0.000479] Initializing cgroup subsys io
  604. [ 0.000487] Initializing cgroup subsys memory
  605. [ 0.000499] Initializing cgroup subsys devices
  606. [ 0.000504] Initializing cgroup subsys freezer
  607. [ 0.000511] Initializing cgroup subsys net_cls
  608. [ 0.000520] CPU: Testing write buffer coherency: ok
  609. [ 0.000628] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  610. [ 0.000651] Setting up static identity map for 0x8280 - 0x82d8
  611. [ 0.000738] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
  612. [ 0.000826] mvebu-pmsu: Initializing Power Management Service Unit
  613. [ 0.001291] Booting CPU 1
  614. [ 0.001457] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  615. [ 0.001486] Brought up 2 CPUs
  616. [ 0.001492] SMP: Total of 2 processors activated (100.00 BogoMIPS).
  617. [ 0.001495] CPU: All CPU(s) started in SVC mode.
  618. [ 0.003259] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  619. [ 0.003335] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  620. [ 0.003391] xor: measuring software checksum speed
  621. [ 0.099897] arm4regs : 2788.000 MB/sec
  622. [ 0.199898] 8regs : 1846.400 MB/sec
  623. [ 0.299897] 32regs : 1670.000 MB/sec
  624. [ 0.299901] xor: using function: arm4regs (2788.000 MB/sec)
  625. [ 0.299915] pinctrl core: initialized pinctrl subsystem
  626. [ 0.300336] NET: Registered protocol family 16
  627. [ 0.300854] DMA: preallocated 256 KiB pool for atomic coherent allocations
  628. [ 0.321481] cpuidle: using governor ladder
  629. [ 0.324115] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
  630. [ 0.324123] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
  631. [ 0.520207] raid6: int32x1 gen() 155 MB/s
  632. [ 0.689957] raid6: int32x1 xor() 213 MB/s
  633. [ 0.860084] raid6: int32x2 gen() 255 MB/s
  634. [ 1.029926] raid6: int32x2 xor() 229 MB/s
  635. [ 1.199953] raid6: int32x4 gen() 284 MB/s
  636. [ 1.369956] raid6: int32x4 xor() 190 MB/s
  637. [ 1.539924] raid6: int32x8 gen() 369 MB/s
  638. [ 1.709910] raid6: int32x8 xor() 214 MB/s
  639. [ 1.709913] raid6: using algorithm int32x8 gen() 369 MB/s
  640. [ 1.709916] raid6: .... xor() 214 MB/s, rmw enabled
  641. [ 1.709919] raid6: using intx1 recovery algorithm
  642. [ 1.710640] clocksource: Switched to clocksource armada_370_xp_clocksource
  643. [ 1.711070] NET: Registered protocol family 2
  644. [ 1.711349] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  645. [ 1.711388] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  646. [ 1.711478] TCP: Hash tables configured (established 8192 bind 8192)
  647. [ 1.711518] UDP hash table entries: 512 (order: 2, 16384 bytes)
  648. [ 1.711539] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  649. [ 1.711639] NET: Registered protocol family 1
  650. [ 1.712100] futex hash table entries: 512 (order: 3, 32768 bytes)
  651. [ 1.712563] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  652. [ 1.712571] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  653. [ 1.713007] bounce: pool size: 64 pages
  654. [ 1.713040] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  655. [ 1.713050] io scheduler noop registered
  656. [ 1.713056] io scheduler deadline registered (default)
  657. [ 1.713439] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
  658. [ 1.713770] irq: Cannot allocate irq_descs @ IRQ48, assuming pre-allocated
  659. [ 1.713921] irq: Cannot allocate irq_descs @ IRQ80, assuming pre-allocated
  660. [ 1.714253] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
  661. [ 1.714262] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
  662. [ 1.714267] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
  663. [ 1.714272] pci_bus 0000:00: root bus resource [bus 00-ff]
  664. [ 1.714559] PCI: bus0: Fast back to back transfers disabled
  665. [ 1.714565] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  666. [ 1.714572] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  667. [ 1.714577] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  668. [ 1.714837] PCI: bus1: Fast back to back transfers disabled
  669. [ 1.715092] PCI: bus2: Fast back to back transfers disabled
  670. [ 1.715150] PCI: bus3: Fast back to back transfers enabled
  671. [ 1.715212] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
  672. [ 1.715219] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0200000-0xe04fffff]
  673. [ 1.715226] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit]
  674. [ 1.715237] pci 0000:00:01.0: PCI bridge to [bus 01]
  675. [ 1.715242] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
  676. [ 1.715250] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0200000-0xe03fffff 64bit]
  677. [ 1.715260] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0400000-0xe040ffff pref]
  678. [ 1.715265] pci 0000:00:02.0: PCI bridge to [bus 02]
  679. [ 1.715270] pci 0000:00:02.0: bridge window [mem 0xe0200000-0xe04fffff]
  680. [ 1.715275] pci 0000:00:03.0: PCI bridge to [bus 03]
  681. [ 1.715383] mv_xor f1060800.xor: Marvell shared XOR driver
  682. [ 1.740915] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
  683. [ 1.741003] mv_xor f1060900.xor: Marvell shared XOR driver
  684. [ 1.780918] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
  685. [ 1.781064] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  686. [ 1.781954] console [ttyS0] disabled
  687. [ 1.802030] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 15625000) is a 16550A
  688. [ 2.592088] console [ttyS0] enabled
  689. [ 2.615809] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 23, base_baud = 15625000) is a 16550A
  690. [ 2.625571] m25p80 spi0.0: s25fl164k (8192 Kbytes)
  691. [ 2.630430] 2 ofpart partitions found on MTD device spi0.0
  692. [ 2.635940] Creating 2 MTD partitions on "spi0.0":
  693. [ 2.640751] 0x000000000000-0x000000100000 : "U-Boot"
  694. [ 2.646059] 0x000000100000-0x000000800000 : "Rescue system"
  695. [ 2.652345] libphy: Fixed MDIO Bus: probed
  696. [ 2.656660] libphy: orion_mdio_bus: probed
  697. [ 2.661899] mvneta f1030000.ethernet eth0: Using hardware mac address d8:58:d7:00:4c:35
  698. [ 2.670698] mvneta f1034000.ethernet eth1: Using hardware mac address d8:58:d7:00:4c:36
  699. [ 2.679468] mvneta f1070000.ethernet eth2: Using hardware mac address d8:58:d7:00:4c:37
  700. [ 2.687719] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
  701. [ 3.200744] i2c /dev entries driver
  702. [ 3.204998] at24 1-0054: 8192 byte 24c64 EEPROM, writable, 1 bytes/write
  703. [ 3.211780] i2c i2c-0: Added multiplexed i2c bus 1
  704. [ 3.216644] i2c i2c-0: Added multiplexed i2c bus 2
  705. [ 3.221522] i2c i2c-0: Added multiplexed i2c bus 3
  706. [ 3.226384] i2c i2c-0: Added multiplexed i2c bus 4
  707. [ 3.231263] i2c i2c-0: Added multiplexed i2c bus 5
  708. [ 3.236124] i2c i2c-0: Added multiplexed i2c bus 6
  709. [ 3.240997] i2c i2c-0: Added multiplexed i2c bus 7
  710. [ 3.247804] i2c i2c-0: Added multiplexed i2c bus 8
  711. [ 3.252621] pca954x 0-0070: registered 8 multiplexed busses for I2C mux pca9547
  712. [ 3.260110] sdhci: Secure Digital Host Controller Interface driver
  713. [ 3.266314] sdhci: Copyright(c) Pierre Ossman
  714. [ 3.270834] sdhci-pxav3 f10d8000.sdhci: No vmmc regulator found
  715. [ 3.276768] sdhci-pxav3 f10d8000.sdhci: No vqmmc regulator found
  716. [ 3.320632] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
  717. [ 3.328084] sdhci-pltfm: SDHCI platform and OF driver helper
  718. [ 3.343164] NET: Registered protocol family 10
  719. [ 3.348128] NET: Registered protocol family 17
  720. [ 3.352615] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  721. [ 3.365272] Bridge firewalling registered
  722. [ 3.369292] 8021q: 802.1Q VLAN Support v1.8
  723. [ 3.373556] Registering SWP/SWPB emulation handler
  724. [ 3.378955] Btrfs loaded
  725. [ 3.382136] mvsw61xx 10.mvsw61xx: Found MV88E6176 at f1072004.mdio-mi:10
  726. [ 3.388855] mvsw61xx 10.mvsw61xx: Using indirect addressing
  727. [ 3.413560] mmc0: MAN_BKOPS_EN bit is not set
  728. [ 3.420956] mmc0: new high speed MMC card at address 0001
  729. [ 3.426589] mmcblk0: mmc0:0001 H8G4a’ 7.28 GiB
  730. [ 3.431221] mmcblk0boot0: mmc0:0001 H8G4a’ partition 1 4.00 MiB
  731. [ 3.437163] armada38x-rtc f10a3800.rtc: setting system clock to 2018-09-15 15:01:56 UTC (1537023716)
  732. [ 3.446394] mmcblk0boot1: mmc0:0001 H8G4a’ partition 2 4.00 MiB
  733. [ 3.452442] Waiting 2 sec before mounting root device...
  734. [ 3.452461] mmcblk0rpmb: mmc0:0001 H8G4a’ partition 3 4.00 MiB
  735. [ 3.464506] mmcblk0: p1
  736. [ 5.470855] UBIFS error (pid: 1): cannot open "ubi0:rootfs", error -19
  737. [ 5.479663] BTRFS: device fsid 8eaaeecd-1cc1-4ce7-8875-740440bf28d6 devid 1 transid 541294 /dev/root
  738. [ 5.489611] BTRFS info (device mmcblk0p1): disk space caching is enabled
  739. [ 5.496338] BTRFS: has skinny extents
  740. [ 5.508304] BTRFS: detected SSD devices, enabling SSD mode
  741. [ 5.540641] VFS: Mounted root (btrfs filesystem) on device 0:13.
  742. [ 5.546778] Freeing unused kernel memory: 260K (c0635000 - c0676000)
  743. [ 5.599661] init: Console is alive
  744. [ 5.949862] usbcore: registered new interface driver usbfs
  745. [ 5.955421] usbcore: registered new interface driver hub
  746. [ 5.960786] usbcore: registered new device driver usb
  747. [ 5.968208] exFAT: Version 1.2.9
  748. [ 5.990284] JFS: nTxBlock = 8059, nTxLock = 64478
  749. [ 6.065967] SGI XFS with security attributes, no debug enabled
  750. [ 6.076706] SCSI subsystem initialized
  751. [ 6.090672] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  752. [ 6.097538] ehci-platform: EHCI generic platform driver
  753. [ 6.103187] ehci-orion: EHCI orion driver
  754. [ 6.107307] orion-ehci f1058000.usb: EHCI Host Controller
  755. [ 6.112740] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
  756. [ 6.120385] orion-ehci f1058000.usb: irq 39, io mem 0xf1058000
  757. [ 6.140647] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
  758. [ 6.146837] hub 1-0:1.0: USB hub found
  759. [ 6.150607] hub 1-0:1.0: 1 port detected
  760. [ 6.155699] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  761. [ 6.164796] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  762. [ 6.174239] scsi host0: ahci-mvebu
  763. [ 6.177805] scsi host1: ahci-mvebu
  764. [ 6.181328] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 44
  765. [ 6.189264] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 44
  766. [ 6.540626] ata1: SATA link down (SStatus 0 SControl 300)
  767. [ 6.546052] ata2: SATA link down (SStatus 0 SControl 300)
  768. [ 6.552483] uhci_hcd: USB Universal Host Controller Interface driver
  769. [ 6.559463] orion_wdt: Initial timeout 171 sec
  770. [ 6.567872] xhci-hcd f10f0000.usb3: xHCI Host Controller
  771. [ 6.573226] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
  772. [ 6.580826] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
  773. [ 6.589389] xhci-hcd f10f0000.usb3: irq 46, io mem 0xf10f0000
  774. [ 6.595412] hub 2-0:1.0: USB hub found
  775. [ 6.599183] hub 2-0:1.0: 1 port detected
  776. [ 6.603224] xhci-hcd f10f0000.usb3: xHCI Host Controller
  777. [ 6.608557] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
  778. [ 6.616131] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
  779. [ 6.624460] hub 3-0:1.0: USB hub found
  780. [ 6.628229] hub 3-0:1.0: 1 port detected
  781. [ 6.632330] xhci-hcd f10f8000.usb3: xHCI Host Controller
  782. [ 6.637662] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
  783. [ 6.645263] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
  784. [ 6.653832] xhci-hcd f10f8000.usb3: irq 47, io mem 0xf10f8000
  785. [ 6.659820] hub 4-0:1.0: USB hub found
  786. [ 6.663598] hub 4-0:1.0: 1 port detected
  787. [ 6.667621] xhci-hcd f10f8000.usb3: xHCI Host Controller
  788. [ 6.672956] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
  789. [ 6.680484] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
  790. [ 6.688812] hub 5-0:1.0: USB hub found
  791. [ 6.692586] hub 5-0:1.0: 1 port detected
  792. [ 6.697942] usbcore: registered new interface driver usb-storage
  793. [ 6.920627] usb 2-1: new high-speed USB device number 2 using xhci-hcd
  794. [ 7.616229] init: - preinit -
  795. Press the [f] key and hit [enter] to enter failsafe mode
  796. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  797. [ 10.666907] mount_root: mounting /dev/root
  798. [ 10.671904] BTRFS info (device mmcblk0p1): disk space caching is enabled
  799. [ 10.679097] mount_root: loading kmods from internal overlay
  800. [ 10.890352] block: attempting to load /etc/config/fstab
  801. [ 10.896751] block: extroot: not configured
  802. [ 10.903399] procd: - early -
  803. [ 11.004448] random: jshn urandom read with 27 bits of entropy available
  804. Failed to connect to ubus
  805. Failed to connect to ubus
  806. [ 11.473253] procd: - watchdog -
  807. [ 11.476632] procd: - ubus -
  808. [ 12.040639] usb 2-1: device descriptor read/64, error -110
  809. [ 12.291176] usb-storage 2-1:1.0: USB Mass Storage device detected
  810. [ 12.301715] scsi host2: usb-storage 2-1:1.0
  811. [ 12.480003] procd: - init -
  812. Please press Enter to activate this console.
  813. [ 12.538378] marvell-cesa f1090000.crypto: CESA device successfully registered
  814. [ 12.549052] NET: Registered protocol family 38
  815. [ 12.567520] md: linear personality registered for level -1
  816. [ 12.573608] md: raid0 personality registered for level 0
  817. [ 12.579714] md: raid1 personality registered for level 1
  818. [ 12.586109] md: raid10 personality registered for level 10
  819. [ 12.592034] async_tx: api initialized (async)
  820. [ 12.599878] md: raid6 personality registered for level 6
  821. [ 12.605236] md: raid5 personality registered for level 5
  822. [ 12.610558] md: raid4 personality registered for level 4
  823. [ 12.618128] FS-Cache: Loaded
  824. [ 12.621502] md: multipath personality registered for level -4
  825. [ 12.628663] NET: Registered protocol family 8
  826. [ 12.633051] NET: Registered protocol family 20
  827. [ 12.642261] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [email protected]
  828. [ 12.653277] Key type dns_resolver registered
  829. [ 12.661298] NET: Registered protocol family 33
  830. [ 12.665755] Key type rxrpc registered
  831. [ 12.669423] Key type rxrpc_s registered
  832. [ 12.677415] kAFS: Red Hat AFS client v0.1 registering.
  833. [ 12.682633] FS-Cache: Netfs 'afs' registered for caching
  834. [ 12.724881] RPC: Registered named UNIX socket transport module.
  835. [ 12.730845] RPC: Registered udp transport module.
  836. [ 12.735558] RPC: Registered tcp transport module.
  837. [ 12.740270] RPC: Registered tcp NFSv4.1 backchannel transport module.
  838. [ 12.751868] ntfs: driver 2.1.32 [Flags: R/O MODULE].
  839. [ 12.762408] RxRPC: Registered security type 2 'rxkad'
  840. [ 12.779727] tun: Universal TUN/TAP device driver, 1.6
  841. [ 12.784819] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  842. [ 12.795325] sit: IPv6 over IPv4 tunneling driver
  843. [ 12.801071] gre: GRE over IPv4 demultiplexor driver
  844. [ 12.806694] ip_gre: GRE over IPv4 tunneling driver
  845. [ 12.829302] Installing knfsd (copyright (C) 1996 [email protected]).
  846. [ 12.837483] PPP generic driver version 2.4.2
  847. [ 12.844094] ip6_tables: (C) 2000-2006 Netfilter Core Team
  848. [ 12.852993] cryptodev: driver 1.8 loaded.
  849. [ 12.860100] Loading modules backported from Linux version master-2015-12-03-0-g1677f62
  850. [ 12.868066] Backport generated by backports.git backports-20151120-0-g906a6b3
  851. [ 12.890943] cfg80211: World regulatory domain updated:
  852. [ 12.896099] cfg80211: DFS Master region: unset
  853. [ 12.900463] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  854. [ 12.910278] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  855. [ 12.918340] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  856. [ 12.927770] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  857. [ 12.935801] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  858. [ 12.945322] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  859. [ 12.954839] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  860. [ 12.962959] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  861. [ 12.970988] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  862. [ 12.997320] pci 0000:00:02.0: enabling device (0140 -> 0142)
  863. [ 13.003372] ath10k_pci 0000:02:00.0: pci irq msi interrupts 1 irq_mode 0 reset_mode 0
  864. [ 13.184114] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
  865. [ 13.194502] ath10k_pci 0000:02:00.0: Falling back to user helper
  866. [ 13.204288] firmware ath10k!cal-pci-0000:02:00.0.bin: firmware_loading_store: map pages failed
  867. [ 13.220856] ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
  868. [ 13.230102] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
  869. [ 13.239742] ath10k_pci 0000:02:00.0: firmware ver 10.2.4.70-2 api 5 features no-p2p crc32 b722ec09
  870. [ 13.288869] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
  871. [ 13.299338] ath10k_pci 0000:02:00.0: Falling back to user helper
  872. [ 13.309142] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
  873. [ 13.318107] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
  874. [ 14.447169] ath10k_pci 0000:02:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
  875. [ 14.534513] cfg80211: Regulatory domain changed to country: US
  876. [ 14.539226] u32 classifier
  877. [ 14.539228] input device check on
  878. [ 14.539228] Actions configured
  879. [ 14.550189] cfg80211: DFS Master region: FCC
  880. [ 14.554394] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  881. [ 14.564173] cfg80211: (2402000 KHz - 2467000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
  882. [ 14.572200] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
  883. [ 14.581705] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
  884. [ 14.591211] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
  885. [ 14.599319] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
  886. [ 14.607344] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  887. [ 14.615738] Mirror/redirect action on
  888. [ 14.624558] netem: version 1.3
  889. [ 14.635060] fuse init (API version 7.23)
  890. [ 14.650219] usbcore: registered new interface driver cdc_wdm
  891. [ 14.659152] Ebtables v2.0 registered
  892. [ 14.664093] ip_tables: (C) 2000-2006 Netfilter Core Team
  893. [ 14.676089] nf_conntrack version 0.5.0 (16119 buckets, 64476 max)
  894. [ 14.864134] Netfilter messages via NETLINK v0.30.
  895. [ 14.869708] PPP MPPE Compression module registered
  896. [ 14.875064] NET: Registered protocol family 24
  897. [ 14.883168] usbcore: registered new interface driver ums-alauda
  898. [ 14.889936] usbcore: registered new interface driver ums-cypress
  899. [ 14.896868] usbcore: registered new interface driver ums-datafab
  900. [ 14.903687] usbcore: registered new interface driver ums-freecom
  901. [ 14.910551] usbcore: registered new interface driver ums-isd200
  902. [ 14.917423] usbcore: registered new interface driver ums-jumpshot
  903. [ 14.924329] usbcore: registered new interface driver ums-karma
  904. [ 14.931366] usbcore: registered new interface driver ums-sddr09
  905. [ 14.938208] usbcore: registered new interface driver ums-sddr55
  906. [ 14.945215] usbcore: registered new interface driver ums-usbat
  907. [ 14.957110] usbcore: registered new interface driver usbserial
  908. [ 14.963012] usbcore: registered new interface driver usbserial_generic
  909. [ 14.969580] usbserial: USB Serial support registered for generic
  910. [ 14.980207] xt_time: kernel timezone is -0000
  911. [ 14.998397] usbcore: registered new interface driver cdc_ether
  912. [ 15.008634] ctnetlink v0.93: registering with nfnetlink.
  913. [ 15.017430] usbcore: registered new interface driver qmi_wwan
  914. [ 15.024391] usbcore: registered new interface driver rndis_host
  915. [ 15.038871] pci 0000:00:01.0: enabling device (0140 -> 0142)
  916. [ 15.144380] ieee80211 phy1: Atheros AR9287 Rev:2 mem=0xf1ca0000, irq=108
  917. [ 15.152829] usbcore: registered new interface driver option
  918. [ 15.158466] usbserial: USB Serial support registered for GSM modem (1-port)
  919. Router Turris successfully started.
  920.  
  921.  
  922.  
  923. BusyBox v1.23.2 (2016-09-05 13:26:40 CEST) built-in shell (ash)
  924.  
  925. _______ _ _ _____ _____ _____ _____
  926. |__ __|| | | || __ \ | __ \ |_ _| / ____|
  927. | | | | | || |__) || |__) | | | | (___
  928. | | | | | || _ / | _ / | | \___ \
  929. | | | |__| || | \ \ | | \ \ _| |_ ____) |
  930. |_| \____/ |_| \_\|_| \_\|_____||_____/
  931.  
  932.  
  933.  
  934. root@turris:/#
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!