Advertisement
Guest User

Untitled

a guest
Sep 22nd, 2015
109
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.19.0-15-generic] (local build)
  2. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model:     PLEXTOR PX-256M6M
  6. Serial Number:    P02430111202
  7. LU WWN Device Id: 0 000000 000000000
  8. Add. Product Id:  HM802070
  9. Firmware Version: 1.01
  10. User Capacity:    256,060,514,304 bytes [256 GB]
  11. Sector Size:      512 bytes logical/physical
  12. Rotation Rate:    Solid State Device
  13. Device is:        Not in smartctl database [for details use: -P showall]
  14. ATA Version is:   ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a
  15. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  16. Local Time is:    Tue Sep 22 21:16:28 2015 UTC
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status:  (0x00) Offline data collection activity
  25.                     was never started.
  26.                     Auto Offline Data Collection: Disabled.
  27. Self-test execution status:      (   0) The previous self-test routine completed
  28.                     without error or no self-test has ever
  29.                     been run.
  30. Total time to complete Offline
  31. data collection:        (   10) seconds.
  32. Offline data collection
  33. capabilities:            (0x15) SMART execute Offline immediate.
  34.                     No Auto Offline data collection support.
  35.                     Abort Offline collection upon new
  36.                     command.
  37.                     No Offline surface scan supported.
  38.                     Self-test supported.
  39.                     No Conveyance Self-test supported.
  40.                     No Selective Self-test supported.
  41. SMART capabilities:            (0x0003) Saves SMART data before entering
  42.                     power-saving mode.
  43.                     Supports SMART auto save timer.
  44. Error logging capability:        (0x01) Error logging supported.
  45.                     General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time:    (   1) minutes.
  48. Extended self-test routine
  49. recommended polling time:    (  10) minutes.
  50. SCT capabilities:          (0x003d) SCT Status supported.
  51.                     SCT Error Recovery Control supported.
  52.                     SCT Feature Control supported.
  53.                     SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 1
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  58.   1 Raw_Read_Error_Rate     0x002f   100   100   000    Pre-fail  Always       -       0
  59.   5 Reallocated_Sector_Ct   0x0003   100   100   000    Pre-fail  Always       -       0
  60.   9 Power_On_Hours          0x0002   100   100   000    Old_age   Always       -       588
  61.  12 Power_Cycle_Count       0x0003   100   100   000    Pre-fail  Always       -       745
  62. 170 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
  63. 171 Unknown_Attribute       0x0003   100   100   000    Pre-fail  Always       -       0
  64. 172 Unknown_Attribute       0x0003   100   100   000    Pre-fail  Always       -       0
  65. 173 Unknown_Attribute       0x0003   100   100   000    Pre-fail  Always       -       9706
  66. 174 Unknown_Attribute       0x0003   100   100   000    Pre-fail  Always       -       39
  67. 175 Program_Fail_Count_Chip 0x0003   000   000   000    Pre-fail  Always       -       0
  68. 176 Erase_Fail_Count_Chip   0x0003   100   100   000    Pre-fail  Always       -       0
  69. 177 Wear_Leveling_Count     0x0003   100   100   000    Pre-fail  Always       -       9706
  70. 178 Used_Rsvd_Blk_Cnt_Chip  0x0003   100   100   000    Pre-fail  Always       -       0
  71. 179 Used_Rsvd_Blk_Cnt_Tot   0x0003   000   000   000    Pre-fail  Always       -       0
  72. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033   100   100   000    Pre-fail  Always       -       1344
  73. 181 Program_Fail_Cnt_Total  0x0003   100   100   000    Pre-fail  Always       -       0
  74. 182 Erase_Fail_Count_Total  0x0003   100   100   000    Pre-fail  Always       -       0
  75. 183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
  76. 184 End-to-End_Error        0x0033   056   056   000    Pre-fail  Always       -       5832793
  77. 187 Reported_Uncorrect      0x0003   100   100   000    Pre-fail  Always       -       0
  78. 188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       9
  79. 192 Power-Off_Retract_Count 0x0003   100   100   000    Pre-fail  Always       -       39
  80. 195 Hardware_ECC_Recovered  0x0003   100   100   000    Pre-fail  Always       -       0
  81. 196 Reallocated_Event_Count 0x0003   100   100   000    Pre-fail  Always       -       0
  82. 198 Offline_Uncorrectable   0x0003   100   100   000    Pre-fail  Always       -       0
  83. 199 UDMA_CRC_Error_Count    0x0003   100   100   000    Pre-fail  Always       -       25
  84. 232 Available_Reservd_Space 0x0003   100   100   010    Pre-fail  Always       -       0
  85. 233 Media_Wearout_Indicator 0x0003   100   100   000    Pre-fail  Always       -       1213
  86. 241 Total_LBAs_Written      0x0003   100   100   000    Pre-fail  Always       -       48210
  87. 242 Total_LBAs_Read         0x0003   100   100   000    Pre-fail  Always       -       67740
  88.  
  89. SMART Error Log Version: 0
  90. No Errors Logged
  91.  
  92. SMART Self-test log structure revision number 1
  93. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  94.  
  95. Selective Self-tests/Logging not supported
  96.  
  97. smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.19.0-15-generic] (local build)
  98. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  99.  
  100. === START OF INFORMATION SECTION ===
  101. Device Model:     PLEXTOR PX-256M6M
  102. Serial Number:    P02430111218
  103. LU WWN Device Id: 0 000000 000000000
  104. Add. Product Id:  HM802070
  105. Firmware Version: 1.01
  106. User Capacity:    256,060,514,304 bytes [256 GB]
  107. Sector Size:      512 bytes logical/physical
  108. Rotation Rate:    Solid State Device
  109. Device is:        Not in smartctl database [for details use: -P showall]
  110. ATA Version is:   ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a
  111. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  112. Local Time is:    Tue Sep 22 21:16:33 2015 UTC
  113. SMART support is: Available - device has SMART capability.
  114. SMART support is: Enabled
  115.  
  116. === START OF READ SMART DATA SECTION ===
  117. SMART overall-health self-assessment test result: PASSED
  118.  
  119. General SMART Values:
  120. Offline data collection status:  (0x00) Offline data collection activity
  121.                     was never started.
  122.                     Auto Offline Data Collection: Disabled.
  123. Self-test execution status:      (   0) The previous self-test routine completed
  124.                     without error or no self-test has ever
  125.                     been run.
  126. Total time to complete Offline
  127. data collection:        (   10) seconds.
  128. Offline data collection
  129. capabilities:            (0x15) SMART execute Offline immediate.
  130.                     No Auto Offline data collection support.
  131.                     Abort Offline collection upon new
  132.                     command.
  133.                     No Offline surface scan supported.
  134.                     Self-test supported.
  135.                     No Conveyance Self-test supported.
  136.                     No Selective Self-test supported.
  137. SMART capabilities:            (0x0003) Saves SMART data before entering
  138.                     power-saving mode.
  139.                     Supports SMART auto save timer.
  140. Error logging capability:        (0x01) Error logging supported.
  141.                     General Purpose Logging supported.
  142. Short self-test routine
  143. recommended polling time:    (   1) minutes.
  144. Extended self-test routine
  145. recommended polling time:    (  10) minutes.
  146. SCT capabilities:          (0x003d) SCT Status supported.
  147.                     SCT Error Recovery Control supported.
  148.                     SCT Feature Control supported.
  149.                     SCT Data Table supported.
  150.  
  151. SMART Attributes Data Structure revision number: 1
  152. Vendor Specific SMART Attributes with Thresholds:
  153. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  154.   1 Raw_Read_Error_Rate     0x002f   100   100   000    Pre-fail  Always       -       0
  155.   5 Reallocated_Sector_Ct   0x0003   100   100   000    Pre-fail  Always       -       0
  156.   9 Power_On_Hours          0x0002   100   100   000    Old_age   Always       -       586
  157.  12 Power_Cycle_Count       0x0003   100   100   000    Pre-fail  Always       -       745
  158. 170 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
  159. 171 Unknown_Attribute       0x0003   100   100   000    Pre-fail  Always       -       0
  160. 172 Unknown_Attribute       0x0003   100   100   000    Pre-fail  Always       -       0
  161. 173 Unknown_Attribute       0x0003   100   100   000    Pre-fail  Always       -       9583
  162. 174 Unknown_Attribute       0x0003   100   100   000    Pre-fail  Always       -       39
  163. 175 Program_Fail_Count_Chip 0x0003   000   000   000    Pre-fail  Always       -       0
  164. 176 Erase_Fail_Count_Chip   0x0003   100   100   000    Pre-fail  Always       -       0
  165. 177 Wear_Leveling_Count     0x0003   100   100   000    Pre-fail  Always       -       9583
  166. 178 Used_Rsvd_Blk_Cnt_Chip  0x0003   100   100   000    Pre-fail  Always       -       0
  167. 179 Used_Rsvd_Blk_Cnt_Tot   0x0003   000   000   000    Pre-fail  Always       -       0
  168. 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033   100   100   000    Pre-fail  Always       -       1248
  169. 181 Program_Fail_Cnt_Total  0x0003   100   100   000    Pre-fail  Always       -       0
  170. 182 Erase_Fail_Count_Total  0x0003   100   100   000    Pre-fail  Always       -       0
  171. 183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
  172. 184 End-to-End_Error        0x0033   100   100   000    Pre-fail  Always       -       0
  173. 187 Reported_Uncorrect      0x0003   100   100   000    Pre-fail  Always       -       0
  174. 188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
  175. 192 Power-Off_Retract_Count 0x0003   100   100   000    Pre-fail  Always       -       39
  176. 195 Hardware_ECC_Recovered  0x0003   100   100   000    Pre-fail  Always       -       0
  177. 196 Reallocated_Event_Count 0x0003   100   100   000    Pre-fail  Always       -       0
  178. 198 Offline_Uncorrectable   0x0003   100   100   000    Pre-fail  Always       -       0
  179. 199 UDMA_CRC_Error_Count    0x0003   100   100   000    Pre-fail  Always       -       0
  180. 232 Available_Reservd_Space 0x0003   100   100   010    Pre-fail  Always       -       0
  181. 233 Media_Wearout_Indicator 0x0003   100   100   000    Pre-fail  Always       -       1197
  182. 241 Total_LBAs_Written      0x0003   100   100   000    Pre-fail  Always       -       47724
  183. 242 Total_LBAs_Read         0x0003   100   100   000    Pre-fail  Always       -       66354
  184.  
  185. SMART Error Log Version: 0
  186. No Errors Logged
  187.  
  188. SMART Self-test log structure revision number 1
  189. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  190.  
  191. Selective Self-tests/Logging not supported
Advertisement
Advertisement
Advertisement
RAW Paste Data Copied
Advertisement