API tools faq
paste
igorkrnic

Untitled

igorkrnic
Jan 18th, 2013
62
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.97 KB | None | 0 0
raw download clone embed print report
  1. [ 4.678908] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 405MHz timing 1 voltage 900mV
  2. [ 4.678969] [drm] nouveau 0000:01:00.0: 3: core 520MHz shader 1238MHz memory 600MHz timing 4 voltage 1000mV
  3. [ 4.679045] [drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory 405MHz voltage 900mV
  4. [ 4.679283] [drm] nouveau 0000:01:00.0: memory controller reports 512MiB VRAM
  5. [ 4.679333] [drm] nouveau 0000:01:00.0: we calculated 1024MiB VRAM
  6. [ 4.681473] [TTM] Zone kernel: Available graphics memory: 16499200 kiB.
  7. [ 4.681522] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
  8. [ 4.681570] [TTM] Initializing pool allocator.
  9. [ 4.681623] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
  10. [ 4.681672] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
  11. [ 4.681737] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
  12. [ 4.748106] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  13. [ 4.748155] [drm] No driver support for vblank timestamp query.
  14. [ 4.852972] No connectors reported connected with modes
  15. [ 4.853021] [drm] Cannot find any crtc or sizes - going 1024x768
  16. [ 4.854697] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x310000, bo ffff880816bdb000
  17. [ 4.855114] fbcon: nouveaufb (fb0) is primary device
  18. [ 4.860425] Console: switching to colour frame buffer device 128x48
  19. [ 4.861662] fb0: nouveaufb frame buffer device
  20. [ 4.861675] drm: registered panic notifier
  21. [ 4.861690] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
  22. [ 4.874366] hda_intel: Disabling MSI
  23. [ 4.874390] snd_hda_intel 0000:01:00.1: setting latency timer to 64
  24. [ 5.740235] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
  25. [ 5.740242] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
  26. [ 5.740268] e1000e 0000:00:19.0: setting latency timer to 64
  27. [ 5.740339] e1000e 0000:00:19.0: irq 72 for MSI/MSI-X
  28. [ 6.045540] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 54:04:a6:49:65:26
  29. [ 6.045552] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
  30. [ 6.045590] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
  31. [ 6.053586] usbcore: registered new interface driver usbfs
  32. [ 6.053650] usbcore: registered new interface driver hub
  33. [ 6.053719] usbcore: registered new device driver usb
  34. [ 6.054285] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  35. [ 6.054323] ehci_hcd 0000:00:1a.0: setting latency timer to 64
  36. [ 6.054327] ehci_hcd 0000:00:1a.0: EHCI Host Controller
  37. [ 6.054355] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
  38. [ 6.054384] ehci_hcd 0000:00:1a.0: debug port 2
  39. [ 6.058259] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
  40. [ 6.058270] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfb443000
  41. [ 6.070279] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  42. [ 6.070335] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  43. [ 6.070340] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  44. [ 6.070345] usb usb1: Product: EHCI Host Controller
  45. [ 6.070348] usb usb1: Manufacturer: Linux 3.2.0-0.bpo.4-amd64 ehci_hcd
  46. [ 6.070352] usb usb1: SerialNumber: 0000:00:1a.0
  47. [ 6.071011] hub 1-0:1.0: USB hub found
  48. [ 6.071174] hub 1-0:1.0: 2 ports detected
  49. [ 6.071731] ehci_hcd 0000:00:1d.0: setting latency timer to 64
  50. [ 6.071734] ehci_hcd 0000:00:1d.0: EHCI Host Controller
  51. [ 6.072173] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  52. [ 6.072701] ehci_hcd 0000:00:1d.0: debug port 2
  53. [ 6.077051] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
  54. [ 6.077055] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfb442000
  55. [ 6.090280] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  56. [ 6.090492] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  57. [ 6.090878] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  58. [ 6.091364] usb usb2: Product: EHCI Host Controller
  59. [ 6.091840] usb usb2: Manufacturer: Linux 3.2.0-0.bpo.4-amd64 ehci_hcd
  60. [ 6.092330] usb usb2: SerialNumber: 0000:00:1d.0
  61. [ 6.093237] hub 2-0:1.0: USB hub found
  62. [ 6.093387] hub 2-0:1.0: 2 ports detected
  63. [ 6.228749] xhci_hcd 0000:06:00.0: setting latency timer to 64
  64. [ 6.228753] xhci_hcd 0000:06:00.0: xHCI Host Controller
  65. [ 6.228903] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
  66. [ 6.290413] xhci_hcd 0000:06:00.0: irq 17, io mem 0xfb300000
  67. [ 6.290604] xhci_hcd 0000:06:00.0: irq 73 for MSI/MSI-X
  68. [ 6.290608] xhci_hcd 0000:06:00.0: irq 74 for MSI/MSI-X
  69. [ 6.290611] xhci_hcd 0000:06:00.0: irq 75 for MSI/MSI-X
  70. [ 6.290614] xhci_hcd 0000:06:00.0: irq 76 for MSI/MSI-X
  71. [ 6.290618] xhci_hcd 0000:06:00.0: irq 77 for MSI/MSI-X
  72. [ 6.290621] xhci_hcd 0000:06:00.0: irq 78 for MSI/MSI-X
  73. [ 6.290625] xhci_hcd 0000:06:00.0: irq 79 for MSI/MSI-X
  74. [ 6.290628] xhci_hcd 0000:06:00.0: irq 80 for MSI/MSI-X
  75. [ 6.290724] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  76. [ 6.290952] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  77. [ 6.291417] usb usb3: Product: xHCI Host Controller
  78. [ 6.291879] usb usb3: Manufacturer: Linux 3.2.0-0.bpo.4-amd64 xhci_hcd
  79. [ 6.292346] usb usb3: SerialNumber: 0000:06:00.0
  80. [ 6.293012] xHCI xhci_add_endpoint called for root hub
  81. [ 6.293014] xHCI xhci_check_bandwidth called for root hub
  82. [ 6.293157] hub 3-0:1.0: USB hub found
  83. [ 6.293299] hub 3-0:1.0: 2 ports detected
  84. [ 6.293752] xhci_hcd 0000:06:00.0: xHCI Host Controller
  85. [ 6.294149] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
  86. [ 6.294611] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  87. [ 6.295043] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  88. [ 6.295487] usb usb4: Product: xHCI Host Controller
  89. [ 6.295930] usb usb4: Manufacturer: Linux 3.2.0-0.bpo.4-amd64 xhci_hcd
  90. [ 6.296382] usb usb4: SerialNumber: 0000:06:00.0
  91. [ 6.296990] xHCI xhci_add_endpoint called for root hub
  92. [ 6.296992] xHCI xhci_check_bandwidth called for root hub
  93. [ 6.297082] hub 4-0:1.0: USB hub found
  94. [ 6.297258] hub 4-0:1.0: 2 ports detected
  95. [ 6.362240] xhci_hcd 0000:07:00.0: setting latency timer to 64
  96. [ 6.362244] xhci_hcd 0000:07:00.0: xHCI Host Controller
  97. [ 6.362383] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
  98. [ 6.382124] usb 1-1: new high-speed USB device number 2 using ehci_hcd
  99. [ 6.423829] xhci_hcd 0000:07:00.0: irq 19, io mem 0xfb200000
  100. [ 6.424013] xhci_hcd 0000:07:00.0: irq 81 for MSI/MSI-X
  101. [ 6.424017] xhci_hcd 0000:07:00.0: irq 82 for MSI/MSI-X
  102. [ 6.424020] xhci_hcd 0000:07:00.0: irq 83 for MSI/MSI-X
  103. [ 6.424023] xhci_hcd 0000:07:00.0: irq 84 for MSI/MSI-X
  104. [ 6.424027] xhci_hcd 0000:07:00.0: irq 85 for MSI/MSI-X
  105. [ 6.424031] xhci_hcd 0000:07:00.0: irq 86 for MSI/MSI-X
  106. [ 6.424034] xhci_hcd 0000:07:00.0: irq 87 for MSI/MSI-X
  107. [ 6.424038] xhci_hcd 0000:07:00.0: irq 88 for MSI/MSI-X
  108. [ 6.424134] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  109. [ 6.424318] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  110. [ 6.424770] usb usb5: Product: xHCI Host Controller
  111. [ 6.425228] usb usb5: Manufacturer: Linux 3.2.0-0.bpo.4-amd64 xhci_hcd
  112. [ 6.425693] usb usb5: SerialNumber: 0000:07:00.0
  113. [ 6.426454] xHCI xhci_add_endpoint called for root hub
  114. [ 6.426456] xHCI xhci_check_bandwidth called for root hub
  115. [ 6.426629] hub 5-0:1.0: USB hub found
  116. [ 6.426768] hub 5-0:1.0: 2 ports detected
  117. [ 6.427176] xhci_hcd 0000:07:00.0: xHCI Host Controller
  118. [ 6.427574] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
  119. [ 6.428052] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
  120. [ 6.428486] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  121. [ 6.428945] usb usb6: Product: xHCI Host Controller
  122. [ 6.429404] usb usb6: Manufacturer: Linux 3.2.0-0.bpo.4-amd64 xhci_hcd
  123. [ 6.429869] usb usb6: SerialNumber: 0000:07:00.0
  124. [ 6.430706] xHCI xhci_add_endpoint called for root hub
  125. [ 6.430708] xHCI xhci_check_bandwidth called for root hub
  126. [ 6.430874] hub 6-0:1.0: USB hub found
  127. [ 6.431015] hub 6-0:1.0: 2 ports detected
  128. [ 6.514607] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
  129. [ 6.514760] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  130. [ 6.515850] hub 1-1:1.0: USB hub found
  131. [ 6.516055] hub 1-1:1.0: 6 ports detected
  132. [ 6.626082] usb 2-1: new high-speed USB device number 2 using ehci_hcd
  133. [ 6.699040] SCSI subsystem initialized
  134. [ 6.700834] libata version 3.00 loaded.
  135. [ 6.701441] ahci 0000:00:1f.2: version 3.0
  136. [ 6.701489] ahci 0000:00:1f.2: irq 89 for MSI/MSI-X
  137. [ 6.701533] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
  138. [ 6.701748] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
  139. [ 6.702100] ahci 0000:00:1f.2: setting latency timer to 64
  140. [ 6.704229] scsi0 : ahci
  141. [ 6.704626] scsi1 : ahci
  142. [ 6.705010] scsi2 : ahci
  143. [ 6.705413] scsi3 : ahci
  144. [ 6.705829] scsi4 : ahci
  145. [ 6.706284] scsi5 : ahci
  146. [ 6.706794] ata1: SATA max UDMA/133 abar m2048@0xfb441000 port 0xfb441100 irq 89
  147. [ 6.707006] ata2: DUMMY
  148. [ 6.707441] ata3: DUMMY
  149. [ 6.707872] ata4: DUMMY
  150. [ 6.708299] ata5: DUMMY
  151. [ 6.708718] ata6: DUMMY
  152. [ 6.709199] ahci 0000:08:00.0: irq 90 for MSI/MSI-X
  153. [ 6.709227] ahci: SSS flag set, parallel bus scan disabled
  154. [ 6.709589] ahci 0000:08:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  155. [ 6.709977] ahci 0000:08:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
  156. [ 6.710406] ahci 0000:08:00.0: setting latency timer to 64
  157. [ 6.711417] scsi6 : ahci
  158. [ 6.711786] scsi7 : ahci
  159. [ 6.712141] ata7: SATA max UDMA/133 abar m512@0xfb100000 port 0xfb100100 irq 90
  160. [ 6.712361] ata8: SATA max UDMA/133 abar m512@0xfb100000 port 0xfb100180 irq 90
  161. [ 6.762541] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
  162. [ 6.762707] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  163. [ 6.763585] hub 2-1:1.0: USB hub found
  164. [ 6.763828] hub 2-1:1.0: 8 ports detected
  165. [ 7.025930] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  166. [ 7.029933] ata7: SATA link down (SStatus 0 SControl 300)
  167. [ 7.031725] ata1.00: ATA-9: SAMSUNG HD502HM, 1AJ10206, max UDMA/100
  168. [ 7.031870] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  169. [ 7.037884] ata1.00: configured for UDMA/100
  170. [ 7.038224] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502HM 1AJ1 PQ: 0 ANSI: 5
  171. [ 7.357825] ata8: SATA link down (SStatus 0 SControl 300)
  172. [ 7.438209] iTCO_vendor_support: vendor-support=0
  173. [ 7.438811] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
  174. [ 7.439176] iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0460)
  175. [ 7.439478] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  176. [ 7.819706] FS-Cache: Loaded
  177. [ 7.822333] RPC: Registered named UNIX socket transport module.
  178. [ 7.822485] RPC: Registered udp transport module.
  179. [ 7.822813] RPC: Registered tcp transport module.
  180. [ 7.823231] RPC: Registered tcp NFSv4.1 backchannel transport module.
  181. [ 7.828318] FS-Cache: Netfs 'nfs' registered for caching
  182. [ 7.833363] aufs: module is from the staging directory, the quality is unknown, you have been warned.
  183. [ 7.834418] aufs 3.2-20120827
  184. [ 7.981634] e1000e 0000:00:19.0: irq 72 for MSI/MSI-X
  185. [ 8.037524] e1000e 0000:00:19.0: irq 72 for MSI/MSI-X
  186. [ 8.038321] ADDRCONF(NETDEV_UP): eth0: link is not ready
  187. [ 10.878112] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
  188. [ 10.878949] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  189. [ 15.072551] aufs test_add:261:mount[689]: uid/gid/perm /tmp/rootro 0/0/0755, 0/0/01777
  190. [ 15.432681] udev[734]: starting version 164
  191. [ 16.366535] sshd (1206): /proc/1206/oom_adj is deprecated, please use /proc/1206/oom_score_adj instead.
  192. [ 21.432436] eth0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!