SHARE
TWEET

4.19.20 patched, 1000_800

a guest Mar 9th, 2019 74 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. TIM-1.0
  2. WTMI-devel-18.12.0-a0a1cb8
  3. WTMI: system early-init
  4. CPU VDD voltage default value: 1.155V
  5. NOTICE:  Booting Trusted Firmware
  6. NOTICE:  BL1: v1.5(release):1f8ca7e (Marvell-devel-18.12.2)
  7. NOTICE:  BL1: Built : 09:47:03, Feb 20 2019
  8. NOTICE:  BL1: Booting BL2
  9. NOTICE:  BL2: v1.5(release):1f8ca7e (Marvell-devel-18.12.2)
  10. NOTICE:  BL2: Built : 09:47:04, Feb 20 2019
  11. NOTICE:  BL1: Booting BL31
  12. NOTICE:  BL31: v1.5(release):1f8ca7e (Marvell-devel-18.12.2)
  13. NOTICE:  BL31: Built : 09:4
  14.  
  15. U-Boot 2018.03-devel-18.12.3-gc9aa92c-armbian (Feb 20 2019 - 09:45:04 +0100)
  16.  
  17. Model: Marvell Armada 3720 Community Board ESPRESSOBin
  18.        CPU     1000 [MHz]
  19.        L2      800 [MHz]
  20.        TClock  200 [MHz]
  21.        DDR     800 [MHz]
  22. DRAM:  1 GiB
  23. Comphy chip #0:
  24. Comphy-0: USB3          5 Gbps    
  25. Comphy-1: PEX0          2.5 Gbps  
  26. Comphy-2: SATA0         6 Gbps    
  27. SATA link 0 timeout.
  28. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
  29. flags: ncq led only pmp fbss pio slum part sxs
  30. PCIE-0: Link down
  31. MMC:   sdhci@d0000: 0, sdhci@d8000: 1
  32. Loading Environment from SPI Flash... SF: Detected w25q32dw with page size 256 Bytes, erase size 4 KiB, total 4 MiB
  33. OK
  34. Model: Marvell Armada 3720 Community Board ESPRESSOBin
  35. Net:   eth0: neta@30000 [PRIME]
  36. Hit any key to stop autoboot:  0
  37. starting USB...
  38. USB0:   Register 2000104 NbrPorts 2
  39. Starting the controller
  40. USB XHCI 1.00
  41. USB1:   USB EHCI 1.00
  42. scanning bus 0 for devices... 2 USB Device(s) found
  43. scanning bus 1 for devices... 1 USB Device(s) found
  44.        scanning usb for storage devices... 1 Storage Device(s) found
  45. /
  46. ** Unrecognized filesystem type **
  47. ## Executing script at 06d00000
  48. Wrong image format for "source" command
  49. /boot/
  50. ** Unrecognized filesystem type **
  51. ## Executing script at 06d00000
  52. Wrong image format for "source" command
  53. scanning bus for devices...
  54.  
  55. Device 0: unknown device
  56. /
  57. ** Bad device scsi 0 **
  58. ## Executing script at 06d00000
  59. Wrong image format for "source" command
  60. /boot/
  61. ** Bad device scsi 0 **
  62. ## Executing script at 06d00000
  63. Wrong image format for "source" command
  64. /
  65. Card did not respond to voltage select!
  66. ** Bad device mmc 1 **
  67. ## Executing script at 06d00000
  68. Wrong image format for "source" command
  69. /boot/
  70. Card did not respond to voltage select!
  71. ** Bad device mmc 1 **
  72. ## Executing script at 06d00000
  73. Wrong image format for "source" command
  74. /
  75. ** File not found /boot.scr **
  76. ## Executing script at 06d00000
  77. Wrong image format for "source" command
  78. /boot/
  79. 1120 bytes read in 13 ms (84 KiB/s)
  80. ## Executing script at 06d00000
  81. 221 bytes read in 5 ms (43 KiB/s)
  82. 16421376 bytes read in 712 ms (22 MiB/s)
  83. 4403814 bytes read in 196 ms (21.4 MiB/s)
  84. ** File not found /boot/dtb/marvell/armada-3720-community.dtb **
  85. 8942 bytes read in 8 ms (1.1 MiB/s)
  86. ## Loading init Ramdisk from Legacy Image at 01100000 ...
  87.    Image Name:   uInitrd
  88.    Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
  89.    Data Size:    4403750 Bytes = 4.2 MiB
  90.    Load Address: 00000000
  91.    Entry Point:  00000000
  92.    Verifying Checksum ... OK
  93. ## Flattened Device Tree blob at 06000000
  94.    Booting using the fdt blob at 0x6000000
  95.    Loading Ramdisk to 3f1f7000, end 3f62a226 ... OK
  96.    Using Device Tree in place at 0000000006000000, end 00000000060052ed
  97.  
  98. Starting kernel ...
  99.  
  100. [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  101. [    0.000000] Linux version 4.19.20-mvebu64 (root@ubuntu) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.76 SMP PREEMPT Sat Mar 9 17:05:30 CET 2019
  102. [    0.000000] Machine model: Globalscale Marvell ESPRESSOBin Board
  103. [    0.000000] earlycon: ar3700_uart0 at MMIO 0x00000000d0012000 (options '')
  104. [    0.000000] bootconsole [ar3700_uart0] enabled
  105. [    4.281651] Internal error: synchronous parity or ECC error: 86000018 [#1] PREEMPT SMP
  106. [    4.286957] Modules linked in:
  107. [    4.290096] CPU: 0 PID: 131 Comm: kworker/0:2 Not tainted 4.19.20-mvebu64 #5.76
  108. [    4.297617] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT)
  109. [    4.304261] Workqueue: events_freezable mmc_rescan
  110. [    4.309177] pstate: 40000085 (nZcv daIf -PAN -UAO)
  111. [    4.314107] pc : rpm_suspend+0x30/0x4d0
  112. [    4.318048] lr : __pm_runtime_suspend+0x5c/0x98
  113. [    4.322704] sp : ffffff800994bc70
  114. [    4.326110] x29: ffffff800994bc70 x28: 0000000000000000
  115. [    4.331575] x27: ffffff8008f79000 x26: ffffff8008118000
  116. [    4.337040] x25: 0000000000000000 x24: 0000000000000001
  117. [    4.342506] x23: ffffff8008c638d0 x22: 0000000000000000
  118. [    4.347971] x21: 000000000000000d x20: 000000000000000d
  119. [    4.353437] x19: ffffffc03fae7010 x18: ffffffffffffffff
  120. [    4.358902] x17: 0000000000000001 x16: 0000000000000000
  121. [    4.364369] x15: 0000000000000400 x14: 0000000000000400
  122. [    4.369834] x13: 0000000000000000 x12: 0000000000000001
  123. [    4.375300] x11: 0000000000000000 x10: 0000000000000910
  124. [    4.380765] x9 : ffffff800994b970 x8 : ffffffc03ffbc2c0
  125. [    4.386231] x7 : ffffffc03f1d03b8 x6 : ffffffc03f1d03e0
  126. [    4.391696] x5 : 0000000000000000 x4 : 0000000000000001
  127. [    4.397162] x3 : 0000000000000000 x2 : 0000000000000000
  128. [    4.402628] x1 : 000000000000000d x0 : ffffffc03fae7010
  129. [    4.408095] Process kworker/0:2 (pid: 131, stack limit = 0x(____ptrval____))
  130. [    4.415351] Call trace:
  131. [    4.417862]  rpm_suspend+0x30/0x4d0
  132. [    4.421445]  __pm_runtime_suspend+0x5c/0x98
  133. [    4.425746]  mmc_release_host+0x88/0xb8
  134. [    4.429692]  mmc_attach_sd+0xc8/0x168
  135. [    4.433452]  mmc_rescan+0x2c8/0x368
  136. [    4.437041]  process_one_work+0x1e0/0x330
  137. [    4.441159]  worker_thread+0x40/0x460
  138. [    4.444922]  kthread+0x128/0x130
  139. [    4.448238]  ret_from_fork+0x10/0x1c
  140. [    4.451911] Code: a9046bf9 f0ffcd3a a90573fb 9000405b (911b2361)
  141. [    4.458184] ---[ end trace f470e3ece0c4599b ]---
  142. [    4.462978] note: kworker/0:2[131] exited with preempt_count 1
  143. [    4.565539] ata1: SATA link down (SStatus 0 SControl 300)
  144. [    4.579809] Freeing unused kernel memory: 640K
  145. [    4.581916] Run /init as init process
  146. [    4.588774] WARNING: CPU: 0 PID: 0 at kernel/time/clockevents.c:319 clockevents_program_event+0x70/0x130
  147. [    4.595690] Modules linked in:
  148. [    4.598831] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G      D           4.19.20-mvebu64 #5.76
  149. [    4.607426] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT)
  150. [    4.614058] pstate: 20000085 (nzCv daIf -PAN -UAO)
  151. [    4.618986] pc : clockevents_program_event+0x70/0x130
  152. [    4.624184] lr : tick_program_event+0x54/0x98
  153. [    4.628661] sp : ffffff8008f73dc0
  154. [    4.632066] x29: ffffff8008f73dc0 x28: 0000000007ed0018
  155. [    4.637532] x27: 0000000000000040 x26: ffffff8008f79000
  156. [    4.642997] x25: ffffff8008f95dc0 x24: 0000000000000040
  157. [    4.648462] x23: ffffffc03ffbe7c0 x22: ffffffc03ffbe800
  158. [    4.653928] x21: 0000000000000001 x20: ffffff80090334f0
  159. [    4.659393] x19: ffffffc03ffc6900 x18: ffffff8008f8f8a0
  160. [    4.664859] x17: 0000000000000001 x16: 0000000000000019
  161. [    4.670324] x15: 00000000000000cc x14: 00000000000000cc
  162. [    4.675791] x13: 0000000000000400 x12: 0000000000000000
  163. [    4.681257] x11: 000000000000000a x10: 0000000000000910
  164. [    4.686722] x9 : ffffff8008f79300 x8 : ffffff8008f793a0
  165. [    4.692188] x7 : ffffff8008f793f0 x6 : 0000000009c4232d
  166. [    4.697654] x5 : ffffff80090334f0 x4 : 0000000111b45c00
  167. [    4.703119] x3 : ffffff80090334f0 x2 : 0000000000000001
  168. [    4.708584] x1 : ffffff80090334f0 x0 : ffffffc03ffc6900
  169. [    4.714050] Call trace:
  170. [    4.716562]  clockevents_program_event+0x70/0x130
  171. [    4.721399]  tick_program_event+0x54/0x98
  172. [    4.725521]  hrtimer_reprogram+0xb0/0xc0
  173. [    4.729554]  tick_nohz_idle_stop_tick+0x1c4/0x240
  174. [    4.734392]  do_idle+0x1c4/0x298
  175. [    4.737706]  cpu_startup_entry+0x24/0x28
  176. [    4.741741]  rest_init+0xd0/0xe0
  177. [    4.745057]  start_kernel+0x3ec/0x418
  178. [    4.748815] ---[ end trace f470e3ece0c4599c ]---
  179. [    4.753568] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
  180. [    4.762612] Mem abort info:
  181. [    4.765480]   ESR = 0x86000005
  182. [    4.768617]   Exception class = IABT (current EL), IL = 32 bits
  183. [    4.774709]   SET = 0, FnV = 0
  184. [    4.777845]   EA = 0, S1PTW = 0
  185. [    4.781071] [0000000000000000] user address but active_mm is swapper
  186. [    4.787614] Internal error: Oops: 86000005 [#2] PREEMPT SMP
  187. [    4.793346] Modules linked in:
  188. [    4.796485] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G      D W         4.19.20-mvebu64 #5.76
  189. [    4.805084] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT)
  190. [    4.811715] pstate: 20000085 (nzCv daIf -PAN -UAO)
  191. [    4.816642] pc :           (null)
  192. [    4.820046] lr :           (null)
  193. [    4.823451] sp : ffffff8008f73e80
  194. [    4.826856] x29: ffffffc03ffbed08 x28: 0000000007ed0018
  195. [    4.832322] x27: 0000000000000040 x26: ffffff8008f79000
  196. [    4.837788] x25: ffffff8008f95dc0 x24: ffffff8008f799dc
  197. [    4.843253] x23: ffffff8008f6c9c0 x22: 00000001113a4a00
  198. [    4.848719] x21: ffffff8008f79000 x20: 0000000111b45c00
  199. [    4.854184] x19: 0000000111b45c00 x18: ffffff8008f8f8a0
  200. [    4.859650] x17: 0000000000000001 x16: 0000000000000019
  201. [    4.865115] x15: 00000000000000cc x14: 00000000000000cc
  202. [    4.870581] x13: 0000000000000400 x12: 0000000000000000
  203. [    4.876046] x11: 000000000000000a x10: 0000000000000910
  204. [    4.881513] x9 : ffffff8008f79300 x8 : ffffff8008f793a0
  205. [    4.886978] x7 : ffffff8008f793f0 x6 : 0000000009c4232d
  206. [    4.892444] x5 : ffffff80090334f0 x4 : 0000000111b45c00
  207. [    4.897909] x3 : ffffff80090334f0 x2 : 0000000000000001
  208. [    4.903374] x1 : ffffff80090334f0 x0 : 00000000000000e2
  209. [    4.908842] Process swapper/0 (pid: 0, stack limit = 0x(____ptrval____))
  210. [    4.915739] Call trace:
  211. [    4.918248]            (null)
  212. [    4.921300] Code: bad PC value
  213. [    4.924438] ---[ end trace f470e3ece0c4599d ]---
  214. [    4.929183] Kernel panic - not syncing: Attempted to kill the idle task!
  215. [    4.936080] SMP: stopping secondary CPUs
  216. [    5.980113] SMP: failed to stop secondary CPUs 0-1
  217. [    5.982183] Kernel Offset: disabled
  218. [    5.985767] CPU features: 0x0,2080200c
  219. [    5.989619] Memory Limit: none
  220. [    5.992758] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top