SHARE
TWEET

uswrt rtl8672

Pteridium Jan 30th, 2013 819 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. persist 2011.06-rc2 (Sep 19 2012 - 13:00:55)
  2.  
  3. Board: RTL8672 mips CPU: RTL8672 proc_id=0xcf01
  4. DRAM:  32 MiB
  5. *** Warning - bad CRC, using default environment
  6.  
  7. In:    serial
  8. Out:   serial
  9. Err:   serial
  10.  
  11.  
  12. persist 2011.06-rc2 (Sep 19 2012 - 13:00:55)
  13.  
  14. Board: RTL8672 mips CPU: RTL8672 proc_id=0xcf01
  15. DRAM:  32 MiB
  16. *** Warning - bad CRC, using default environment
  17.  
  18. In:    serial
  19. Out:   serial
  20. Err:   serial
  21. Wrong Image Format for bootm command
  22. ERROR: can't get kernel image!
  23. RTL8672 #
  24. RTL8672 #
  25. RTL8672 #
  26. RTL8672 #
  27. RTL8672 # à€þü<ÿü?ÿÀ€ÿþÿàüøþøÿÿ?ÿþÿþÿü
  28. RTL8672 #
  29. RTL8672 #
  30. RTL8672 #
  31. RTL8672 #
  32. RTL8672 #
  33. RTL8672 # printenv
  34. addmisc=setenv bootargs 'console=ttyS0,115200 mem=32M root=/dev/sda1 rootdelay=10'
  35. addmtd=setenv bootargs 'console=ttyS0,115200 mem=32M root=31:3'
  36. baudrate=115200
  37. bootargs=console=ttyS0,115200 mem=32M root=/dev/sda1 rootdelay=10
  38. bootcmd=run addmisc; bootm 0xBD040000
  39. bootdelay=6
  40. bootfile=/tftpboot/vmlinux
  41. bootmtd=run addmtd; bootm 0xBD040000
  42. ethaddr=00:C0:01:00:00:01
  43. ipaddr=2.2.2.1
  44. load=tftp 80500000 ${u-boot}
  45. serverip=2.2.2.4
  46. stderr=serial
  47. stdin=serial
  48. stdout=serial
  49. upbootldr=sf probe 0xbd000000; mw 0x81000000 0 0x20000; tftpboot 0x81000000 2.2.2.4:boot.owrt.bin; s
  50. f erase 0xbd000000 ${filesize}; sf write 0x81000000 0xbd000000 ${filesize};
  51. upfw=sf probe 0xbd000000; mw 0x81000000 0 0x100000;tftpboot 0x81000000 2.2.2.4:z.img;sf erase 0xBD04
  52. 0000 ${filesize};sf write 0x81000000 0xBD040000 ${filesize};
  53.  
  54. Environment size: 843/65532 bytes
  55. RTL8672 # run upfw
  56. TFTP from server 2.2.2.4; our IP address is 2.2.2.1
  57. Filename 'z.img'.
  58. Load address: 0x81000000
  59. Loading: #################################################################
  60.          #################################################################
  61.          #################################################################
  62.          ################################
  63. done
  64. Bytes transferred = 3324784 (32bb70 hex)
  65. ....................................................................................................
  66. ....................................................................................................
  67. ....................................................................................................
  68. ....................................................................................................
  69. ....................................................................................................
  70. ....................................................................................................
  71. ....................................................................................................
  72. ....................................................................................................
  73. ............
  74. ....................................................................................................
  75. ....................................................................................................
  76. ....................................................................................................
  77. ....................................................................................................
  78. ....................................................................................................
  79. ....................................................................................................
  80. ....................................................................................................
  81. ....................................................................................................
  82. ............
  83. RTL8672 # reboot
  84. Unknown command 'reboot' - try 'help'
  85. RTL8672 # reset
  86.  
  87.  
  88. persist 2011.06-rc2 (Sep 19 2012 - 13:00:55)
  89.  
  90. Board: RTL8672 mips CPU: RTL8672 proc_id=0xcf01
  91. DRAM:  32 MiB
  92. *** Warning - bad CRC, using default environment
  93.  
  94. In:    serial
  95. Out:   serial
  96. Err:   serial
  97. ## Booting kernel from Legacy Image at bd040000 ...
  98.    Image Name:   Multi-FW
  99.    Created:      2012-09-26   9:20:07 UTC
  100.    Image Type:   MIPS Linux Multi-File Image (uncompressed)
  101.    Data Size:    3324720 Bytes = 3.2 MiB
  102.    Load Address: 00000000
  103.    Entry Point:  00000000
  104.    Contents:
  105.       Image 0: 1824538 Bytes = 1.7 MiB
  106.       Image 1: 1500168 Bytes = 1.4 MiB
  107.    Verifying Checksum ... OK
  108. ## Loading init Ramdisk from multi component Legacy Image at bd040000 ...
  109.    Uncompressing Kernel Image ... OK
  110.  
  111. Starting kernel ...
  112.  
  113. arrow, after rtl8672 console init
  114. [    0.000000] Linux version 3.3.8 (arrow@basic) (gcc version 4.6.3 20120201 (prerelease) (Linaro GC
  115. C 4.6-2012.02) ) #13 Mon Sep 24 18:43:00 CST 2012
  116. [    0.000000] bootconsole [early0] enabled
  117. [    0.000000] CPU revision is: 0000ff00 (Mips3k)
  118. [    0.000000] Determined physical RAM map:
  119. [    0.000000]  memory: 02000000 @ 00000000 (usable)
  120. [    0.000000] User-defined physical RAM map:
  121. [    0.000000]  memory: 02000000 @ 00000000 (usable)
  122. [    0.000000] Zone PFN ranges:
  123. [    0.000000]   Normal   0x00000000 -> 0x00002000
  124. [    0.000000] Movable zone start PFN for each node
  125. [    0.000000] Early memory PFN ranges
  126. [    0.000000]     0: 0x00000000 -> 0x00002000
  127. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
  128. [    0.000000] Kernel command line:  root=/dev/mtdblock3 rootfstype=squashfs,jffs2 noinitrd console=
  129. ttyS0,115200 mem=32M panic=20 initcall_debug=0
  130. [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  131. [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  132. [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  133. [    0.000000] Checking for 'wait' instruction...  disabled.
  134. [    0.000000] Primary instruction cache 16kB, linesize 16 bytes.
  135. [    0.000000] Primary data cache 8kB, linesize 16 bytes.
  136. [    0.000000] Memory: 27456k/32768k available (3914k kernel code, 5312k reserved, 774k data, 180k i
  137. nit, 0k highmem)
  138. [    0.000000] NR_IRQS:128
  139. [    0.000000] arrow, rtl8672_clockevent_init: 93
  140. [    0.000000] arrow, rtl8672_clockevent_init: 103, pass
  141. [    0.000000] console [ttyS0] enabled, bootconsole disabled
  142. [    0.000000] console [ttyS0] enabled, bootconsole disabled
  143. [    0.010000] Calibrating delay loop... 398.13 BogoMIPS (lpj=1990656)
  144. [    0.060000] pid_max: default: 32768 minimum: 301
  145. [    0.060000] Mount-cache hash table entries: 512
  146. [    0.070000] NET: Registered protocol family 16
  147. [    0.170000] bio: create slab <bio-0> at 0
  148. [    0.190000] SCSI subsystem initialized
  149. [    0.190000] usbcore: registered new interface driver usbfs
  150. [    0.200000] usbcore: registered new interface driver hub
  151. [    0.210000] usbcore: registered new device driver usb
  152. [    0.220000] cfg80211: Calling CRDA to update world regulatory domain
  153. [    0.240000] NET: Registered protocol family 2
  154. [    0.250000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  155. [    0.260000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  156. [    0.270000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  157. [    0.270000] TCP: Hash tables configured (established 1024 bind 1024)
  158. [    0.280000] TCP reno registered
  159. [    0.280000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  160. [    0.290000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  161. [    0.300000] NET: Registered protocol family 1
  162. [    0.300000] memmap_pid load
  163. [    0.370000] VFS: Disk quotas dquot_6.5.2
  164. [    0.370000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  165. [    0.380000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  166. [    0.390000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red
  167. Hat, Inc.
  168. [    0.400000] msgmni has been set to 53
  169. [    0.400000] io scheduler noop registered
  170. [    0.410000] io scheduler deadline registered (default)
  171. [    0.420000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  172. [    0.420000] serial8250: ttyS0 at MMIO 0x0 (irq = 12) is a 16550A
  173. [    0.440000] flash device: 0x800000 at 0xbd000000
  174. [    0.460000] SFCR:0xb8001200 SFCSR:0xb8001208 SFDR:0xb800120c
  175. [    0.460000] can not get SPI chip driver!
  176. [    0.470000]
  177. [    0.470000] MXIC matched!!get SPI chip driver!
  178. [    0.480000] Creating 7 MTD partitions on "Physically mapped flash":
  179. [    0.480000] 0x000000000000-0x000000020000 : "boot"
  180. [    0.490000] 0x000000020000-0x000000040000 : "nvram"
  181. [    0.510000] 0x000000040000-0x000000600000 : "fwmtd"
  182. [    0.520000] 0x00000004004c-0x0000005fffbe : "rootfs"
  183. [    0.520000] mtd: partition "rootfs" must either start or end on erase block boundary or be smalle
  184. r than an erase block -- forcing read-only
  185. [    0.530000] mtd: partition "rootfs" set to be root filesystem
  186. [    0.540000] 0x000000600000-0x0000007c0000 : "rootfs_data"
  187. [    0.550000] 0x0000007c0000-0x0000007e0000 : "data_store"
  188. [    0.560000] 0x0000007e0000-0x000000800000 : "data_store_bk"
  189. [    0.580000] tun: Universal TUN/TAP device driver, 1.6
  190. [    0.590000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  191. [    0.590000] PPP generic driver version 2.4.2
  192. [    0.600000] NET: Registered protocol family 24
  193. [    0.610000] usbcore: registered new interface driver dm9601
  194. [    0.610000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  195. [    0.620000] usbcore: registered new interface driver usblp
  196. [    0.630000] Initializing USB Mass Storage driver...
  197. [    0.640000] usbcore: registered new interface driver usb-storage
  198. [    0.640000] USB Mass Storage support registered.
  199. [    0.650000] usbcore: registered new interface driver usbserial
  200. [    0.660000] usbserial: USB Serial Driver core
  201. [    0.660000] USB Serial support registered for ch341-uart
  202. [    0.670000] usbcore: registered new interface driver ch341
  203. [    0.680000] USB Serial support registered for GSM modem (1-port)
  204. [    0.680000] usbcore: registered new interface driver option
  205. [    0.690000] option: v0.7.2:USB Driver for GSM modems
  206. [    0.700000] Mirror/redirect action on
  207. [    0.700000] u32 classifier
  208. [    0.710000]     Performance counters on
  209. [    0.710000]     input device check on
  210. [    0.720000]     Actions configured
  211. [    0.720000] Netfilter messages via NETLINK v0.30.
  212. [    0.720000] nf_conntrack version 0.5.0 (429 buckets, 1716 max)
  213. [    0.730000] xt_time: kernel timezone is -0000
  214. [    0.740000] IPv4 over IPv4 tunneling driver
  215. [    0.740000] ip_tables: (C) 2000-2006 Netfilter Core Team
  216. [    0.750000] TCP cubic registered
  217. [    0.760000] NET: Registered protocol family 10
  218. [    0.770000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  219. [    0.770000] IPv6 over IPv4 tunneling driver
  220. [    0.780000] NET: Registered protocol family 17
  221. [    0.790000] 8021q: 802.1Q VLAN Support v1.8
  222. [    0.800000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
  223. [    0.810000] Freeing unused kernel memory: 180k freed
  224. - preinit -
  225. Press the [f] key and hit [enter] to enter failsafe mode
  226. - regular preinit -
  227. [    5.680000] JFFS2 notice: (322) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0
  228.  of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  229. switching to jffs2
  230. - init -
  231. init started: BusyBox v1.19.4 ()
  232.  
  233. Please press Enter to activate this console.
  234.  
  235.  
  236. BusyBox v1.19.4 () built-in shell (ash)
  237. Enter 'help' for a list of built-in commands.
  238.  
  239. - W I R E L E S S    F R E E D O M -
  240. - rtl8672  (v, a, t, s) MIPS go on -
  241. - persist                   create -
  242. ------------------------------------
  243. root@rtl8672:/# [   13.830000] device eth0 entered promiscuous mode
  244. [   14.010000] br-lan: port 1(eth0) entered forwarding state
  245. [   14.020000] br-lan: port 1(eth0) entered forwarding state
  246. sysinit: Loading defaults
  247.  
  248. [   16.020000] br-lan: port 1(eth0) entered forwarding state
  249. sysinit: Loading synflood protection
  250.  
  251. sysinit: Adding custom chains
  252.  
  253. sysinit: Loading zones
  254.  
  255. sysinit: Loading forwardings
  256.  
  257. sysinit: Loading rules
  258.  
  259. sysinit: Loading redirects
  260.  
  261. sysinit: Loading includes
  262.  
  263. sysinit: Optimizing conntrack
  264.  
  265. sysinit: Loading interfaces
  266.  
  267. sysinit: Generating RSA private key, 1024 bit long modulus
  268.  
  269.  
  270. root@rtl8672:/# help
  271. Built-in commands:
  272. ------------------
  273.         . : [ [[ alias bg break cd chdir command continue echo eval exec
  274.         exit export false fg getopts hash help jobs kill let local printf
  275.         pwd read readonly return set shift source test times trap true
  276.         type ulimit umask unalias unset wait
  277.  
  278. root@rtl8672:/# sysinit: Generating selfsigned certificate with subject 'C=DE;ST=Berlin;L=Berlin;CN=
  279. OpenWrt;' and validity 2001-09-09 01:46:40-2003-09-09 01:46:40
  280.  
  281.  
  282. root@rtl8672:/# sysinit: service: file '/usr/sbin/ntpd' is not executable
  283.  
  284.  
  285. root@rtl8672:/# dmesg
  286. [    0.000000] Linux version 3.3.8 (arrow@basic) (gcc version 4.6.3 20120201 (prerelease) (Linaro GC
  287. C 4.6-2012.02) ) #13 Mon Sep 24 18:43:00 CST 2012
  288. [    0.000000] bootconsole [early0] enabled
  289. [    0.000000] CPU revision is: 0000ff00 (Mips3k)
  290. [    0.000000] Determined physical RAM map:
  291. [    0.000000]  memory: 02000000 @ 00000000 (usable)
  292. [    0.000000] User-defined physical RAM map:
  293. [    0.000000]  memory: 02000000 @ 00000000 (usable)
  294. [    0.000000] Zone PFN ranges:
  295. [    0.000000]   Normal   0x00000000 -> 0x00002000
  296. [    0.000000] Movable zone start PFN for each node
  297. [    0.000000] Early memory PFN ranges
  298. [    0.000000]     0: 0x00000000 -> 0x00002000
  299. [    0.000000] On node 0 totalpages: 8192
  300. [    0.000000] free_area_init_node: node 0, pgdat 80493b40, node_mem_map 81000000
  301. [    0.000000]   Normal zone: 64 pages used for memmap
  302. [    0.000000]   Normal zone: 0 pages reserved
  303. [    0.000000]   Normal zone: 8128 pages, LIFO batch:0
  304. [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  305. [    0.000000] pcpu-alloc: [0] 0
  306. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
  307. [    0.000000] Kernel command line:  root=/dev/mtdblock3 rootfstype=squashfs,jffs2 noinitrd console=
  308. ttyS0,115200 mem=32M panic=20 initcall_debug=0
  309. [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  310. [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  311. [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  312. [    0.000000] Checking for 'wait' instruction...  disabled.
  313. [    0.000000] Primary instruction cache 16kB, linesize 16 bytes.
  314. [    0.000000] Primary data cache 8kB, linesize 16 bytes.
  315. [    0.000000] Memory: 27456k/32768k available (3914k kernel code, 5312k reserved, 774k data, 180k i
  316. nit, 0k highmem)
  317. [    0.000000] NR_IRQS:128
  318. [    0.000000] arrow, rtl8672_clockevent_init: 93
  319. [    0.000000] arrow, rtl8672_clockevent_init: 103, pass
  320. [    0.000000] console [ttyS0] enabled, bootconsole disabled
  321. [    0.010000] Calibrating delay loop... 398.13 BogoMIPS (lpj=1990656)
  322. [    0.060000] pid_max: default: 32768 minimum: 301
  323. [    0.060000] Mount-cache hash table entries: 512
  324. [    0.070000] NET: Registered protocol family 16
  325. [    0.170000] bio: create slab <bio-0> at 0
  326. [    0.190000] SCSI subsystem initialized
  327. [    0.190000] usbcore: registered new interface driver usbfs
  328. [    0.200000] usbcore: registered new interface driver hub
  329. [    0.210000] usbcore: registered new device driver usb
  330. [    0.220000] cfg80211: Calling CRDA to update world regulatory domain
  331. [    0.240000] NET: Registered protocol family 2
  332. [    0.250000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  333. [    0.260000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  334. [    0.270000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  335. [    0.270000] TCP: Hash tables configured (established 1024 bind 1024)
  336. [    0.280000] TCP reno registered
  337. [    0.280000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  338. [    0.290000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  339. [    0.300000] NET: Registered protocol family 1
  340. [    0.300000] PCI: CLS 0 bytes, default 64
  341. [    0.300000] memmap_pid load
  342. [    0.370000] VFS: Disk quotas dquot_6.5.2
  343. [    0.370000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  344. [    0.380000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  345. [    0.390000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red
  346. Hat, Inc.
  347. [    0.400000] msgmni has been set to 53
  348. [    0.400000] io scheduler noop registered
  349. [    0.410000] io scheduler deadline registered (default)
  350. [    0.420000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  351. [    0.420000] serial8250: ttyS0 at MMIO 0x0 (irq = 12) is a 16550A
  352. [    0.440000] flash device: 0x800000 at 0xbd000000
  353. [    0.460000] SFCR:0xb8001200 SFCSR:0xb8001208 SFDR:0xb800120c
  354. [    0.460000] can not get SPI chip driver!
  355. [    0.470000]
  356. [    0.470000] MXIC matched!!get SPI chip driver!
  357. [    0.480000] Creating 7 MTD partitions on "Physically mapped flash":
  358. [    0.480000] 0x000000000000-0x000000020000 : "boot"
  359. [    0.490000] 0x000000020000-0x000000040000 : "nvram"
  360. [    0.510000] 0x000000040000-0x000000600000 : "fwmtd"
  361. [    0.520000] 0x00000004004c-0x0000005fffbe : "rootfs"
  362. [    0.520000] mtd: partition "rootfs" must either start or end on erase block boundary or be smalle
  363. r than an erase block -- forcing read-only
  364. [    0.530000] mtd: partition "rootfs" set to be root filesystem
  365. [    0.540000] 0x000000600000-0x0000007c0000 : "rootfs_data"
  366. [    0.550000] 0x0000007c0000-0x0000007e0000 : "data_store"
  367. [    0.560000] 0x0000007e0000-0x000000800000 : "data_store_bk"
  368. [    0.580000] tun: Universal TUN/TAP device driver, 1.6
  369. [    0.590000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  370. [    0.590000] PPP generic driver version 2.4.2
  371. [    0.600000] NET: Registered protocol family 24
  372. [    0.610000] usbcore: registered new interface driver dm9601
  373. [    0.610000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  374. [    0.620000] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
  375. [    0.620000] usbcore: registered new interface driver usblp
  376. [    0.630000] Initializing USB Mass Storage driver...
  377. [    0.640000] usbcore: registered new interface driver usb-storage
  378. [    0.640000] USB Mass Storage support registered.
  379. [    0.650000] usbcore: registered new interface driver usbserial
  380. [    0.660000] usbserial: USB Serial Driver core
  381. [    0.660000] USB Serial support registered for ch341-uart
  382. [    0.670000] usbcore: registered new interface driver ch341
  383. [    0.680000] USB Serial support registered for GSM modem (1-port)
  384. [    0.680000] usbcore: registered new interface driver option
  385. [    0.690000] option: v0.7.2:USB Driver for GSM modems
  386. [    0.700000] Mirror/redirect action on
  387. [    0.700000] u32 classifier
  388. [    0.710000]     Performance counters on
  389. [    0.710000]     input device check on
  390. [    0.720000]     Actions configured
  391. [    0.720000] Netfilter messages via NETLINK v0.30.
  392. [    0.720000] nf_conntrack version 0.5.0 (429 buckets, 1716 max)
  393. [    0.730000] xt_time: kernel timezone is -0000
  394. [    0.740000] IPv4 over IPv4 tunneling driver
  395. [    0.740000] ip_tables: (C) 2000-2006 Netfilter Core Team
  396. [    0.750000] TCP cubic registered
  397. [    0.760000] NET: Registered protocol family 10
  398. [    0.770000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  399. [    0.770000] IPv6 over IPv4 tunneling driver
  400. [    0.780000] NET: Registered protocol family 17
  401. [    0.790000] 8021q: 802.1Q VLAN Support v1.8
  402. [    0.800000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
  403. [    0.810000] Freeing unused kernel memory: 180k freed
  404. [    5.680000] JFFS2 notice: (322) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0
  405.  of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  406. [   13.830000] device eth0 entered promiscuous mode
  407. [   14.010000] br-lan: port 1(eth0) entered forwarding state
  408. [   14.020000] br-lan: port 1(eth0) entered forwarding state
  409. [   16.020000] br-lan: port 1(eth0) entered forwarding state
  410. root@rtl8672:/# ls
  411. bin      etc      mnt      proc     root     sys      usr      www
  412. dev      lib      overlay  rom      sbin     tmp      var
  413. root@rtl8672:/# cd bin
  414. root@rtl8672:/bin# ls
  415. adsl_init      debug_piddump  ln             opkg           sync
  416. ash            df             lock           pidof          tar
  417. busybox        dmesg          login.sh       ping           touch
  418. cat            echo           ls             ping6          true
  419. chgrp          egrep          mkdir          ps             ubus
  420. chmod          false          mknod          pwd            umount
  421. chown          fgrep          mktemp         rm             uname
  422. cp             grep           mount          rmdir          vi
  423. date           gunzip         mv             sarctl         zcat
  424. dd             gzip           netmsg         sed
  425. debug_lsstack  ipcalc.sh      netstat        sh
  426. debug_memdump  kill           nice           sleep
  427. root@rtl8672:/bin# cd ..
  428. root@rtl8672:/# cd sbin
  429. root@rtl8672:/sbin# ls
  430. blkid              ifstatus           netifd             syslogd
  431. devstatus          ifup               pivot_root         sysupgrade
  432. fdisk              init               poweroff           ubusd
  433. firstboot          insmod             reboot             uci
  434. fw                 klogd              rmmod              udevtrigger
  435. halt               led.sh             route              udhcpc
  436. hotplug-call       logread            start-stop-daemon  vconfig
  437. hotplug2           lsmod              swapoff            watchdog
  438. hwclock            mkswap             swapon             wifi
  439. ifconfig           mount_root         switch_root
  440. ifdown             mtd                sysctl
  441. root@rtl8672:/sbin# cd ..
  442. root@rtl8672:/# cd /usr/sbin
  443. root@rtl8672:/usr/sbin# ls
  444. br2684ctl         dhcprelay         iptables-restore  tc
  445. brctl             dnsmasq           iptables-save     telnetd
  446. chat              dropbear          pppd              udhcpd
  447. chroot            ip                px5g              uhttpd
  448. crond             iptables          rdate
  449. root@rtl8672:/usr/sbin# cd ..
  450. root@rtl8672:/usr# ls
  451. bin    lib    sbin   share
  452. root@rtl8672:/usr# cd bin
  453. root@rtl8672:/usr/bin# ls
  454. [            dbclient     head         md5sum       qos-stop     time
  455. [[           diff         hexdump      mesg         reset        top
  456. arping       dirname      hostid       mkfifo       scp          tr
  457. awk          dropbearkey  id           nc           seq          traceroute
  458. basename     du           jshn         nslookup     sort         uniq
  459. bunzip2      env          killall      passwd       ssh          uptime
  460. bzcat        expr         killall5     pgrep        strings      wc
  461. clear        find         less         pkill        tail         wget
  462. comgt        free         logger       printf       tee          which
  463. crontab      ftpget       lsusb        qos-start    telnet       xargs
  464. cut          gcom         lua          qos-stat     test         yes
  465. root@rtl8672:/usr/bin# openssl
  466. /bin/ash: openssl: not found
  467. root@rtl8672:/usr/bin# cat /proc/cpuinfo
  468. system type             : Grass
  469. processor               : 0
  470. cpu model               : Mips3k V0.0
  471. BogoMIPS                : 398.13
  472. wait instruction        : no
  473. microsecond timers      : no
  474. tlb_entries             : 32
  475. extra interrupt vector  : no
  476. hardware watchpoint     : no
  477. ASEs implemented        :
  478. shadow register sets    : 0
  479. kscratch registers      : 0
  480. core                    : 0
  481. VCED exceptions         : not available
  482. VCEI exceptions         : not available
  483.  
  484. root@rtl8672:/usr/bin# lsmod
  485. Module                  Size  Used by    Not tainted
  486. xt_CT                   1760  0
  487. root@rtl8672:/usr/bin# cd /proc
  488. root@rtl8672:/proc# lspci
  489. /bin/ash: lspci: not found
  490. root@rtl8672:/proc# ls
  491. 1              323            890            ioports        slabinfo
  492. 101            325            97             irq            softirqs
  493. 109            340            99             kallsyms       stat
  494. 117            376            buddyinfo      kmsg           swaps
  495. 118            378            bus            loadavg        sys
  496. 138            380            cmdline        locks          sysrq-trigger
  497. 139            387            consoles       meminfo        sysvipc
  498. 140            397            cpuinfo        memmap_pid     timer_list
  499. 156            4              crypto         misc           tty
  500. 161            476            devices        modules        uptime
  501. 166            5              diskstats      mounts         version
  502. 171            6              driver         mtd            vmallocinfo
  503. 176            7              execdomains    net            vmstat
  504. 181            817            filesystems    pagetypeinfo   zoneinfo
  505. 186            827            fs             partitions
  506. 2              862            interrupts     scsi
  507. 3              869            iomem          self
  508. root@rtl8672:/proc# cat devices
  509. Character devices:
  510.   1 mem
  511.   4 ttyS
  512.   5 /dev/tty
  513.   5 /dev/console
  514.   5 /dev/ptmx
  515.  10 misc
  516.  90 mtd
  517. 101 piddump
  518. 102 memdump
  519. 108 ppp
  520. 128 ptm
  521. 136 pts
  522. 180 usb
  523. 188 ttyUSB
  524. 189 usb_device
  525.  
  526. Block devices:
  527. 259 blkext
  528.   8 sd
  529.  31 mtdblock
  530.  65 sd
  531.  66 sd
  532.  67 sd
  533.  68 sd
  534.  69 sd
  535.  70 sd
  536.  71 sd
  537. 128 sd
  538. 129 sd
  539. 130 sd
  540. 131 sd
  541. 132 sd
  542. 133 sd
  543. 134 sd
  544. 135 sd
  545. root@rtl8672:/proc#
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!
 
Top