API tools faq
paste
Advertisement
Guest User

Before Updates

a guest
Apr 10th, 2022
130
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 51.61 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2022.04.10 19:46:31 =~=~=~=~=~=~=~=~=~=~=~=
  2.  
  3. U-Boot SPL 2021.04-armbian (May 06 2021 - 18:28:08 +0000)
  4. DRAM: 1024 MiB
  5. Trying to boot from MMC1
  6. NOTICE: BL31: v2.2(debug):a04808c-dirty
  7. NOTICE: BL31: Built : 18:28:00, May 6 2021
  8. NOTICE: BL31: Detected Allwinner H6 SoC (1728)
  9. NOTICE: BL31: Found U-Boot DTB at 0xc085598, model: OrangePi One Plus
  10. INFO: ARM GICv2 driver initialized
  11. NOTICE: PMIC: Probing AXP805
  12. NOTICE: PMIC: AXP805 detected
  13. INFO: BL31: Platform setup done
  14. INFO: BL31: Initializing runtime services
  15. INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
  16. INFO: BL31: Preparing for EL3 exit to normal world
  17. INFO: Entry point address = 0x4a000000
  18. INFO: SPSR = 0x3c9
  19.  
  20.  
  21. U-Boot 2021.04-armbian (May 06 2021 - 18:28:08 +0000) Allwinner Technology
  22.  
  23. CPU: Allwinner H6 (SUN50I)
  24. Model: OrangePi One Plus
  25. DRAM: 1 GiB
  26. MMC: mmc@4020000: 0
  27. Loading Environment from FAT... Unable to use mmc 0:1... In: serial@5000000
  28. Out: serial@5000000
  29. Err: serial@5000000
  30. Net: No ethernet found.
  31. starting USB...
  32. Bus usb@5101000: USB EHCI 1.00
  33. Bus usb@5101400: USB OHCI 1.0
  34. Bus usb@5311000: USB EHCI 1.00
  35. Bus usb@5311400: USB OHCI 1.0
  36. scanning bus usb@5101000 for devices... 1 USB Device(s) found
  37. scanning bus usb@5101400 for devices... 1 USB Device(s) found
  38. scanning bus usb@5311000 for devices... 1 USB Device(s) found
  39. scanning bus usb@5311400 for devices... 1 USB Device(s) found
  40. scanning usb for storage devices... 0 Storage Device(s) found
  41. Autoboot in 1 seconds, press <Space> to stop
  42. switch to partitions #0, OK
  43. mmc0 is current device
  44. Scanning mmc 0:1...
  45. Found U-Boot script /boot/boot.scr
  46. 3202 bytes read in 3 ms (1 MiB/s)
  47. ## Executing script at 4fc00000
  48. U-boot loaded from SD
  49. Boot script loaded from mmc
  50. 203 bytes read in 3 ms (65.4 KiB/s)
  51. 35013 bytes read in 11 ms (3 MiB/s)
  52. 4191 bytes read in 8 ms (510.7 KiB/s)
  53. Applying kernel provided DT fixup script (sun50i-h6-fixup.scr)
  54. ## Executing script at 45000000
  55. 15228836 bytes read in 1528 ms (9.5 MiB/s)
  56. 21792776 bytes read in 2223 ms (9.3 MiB/s)
  57. Moving Image from 0x40080000 to 0x40200000, end=41730000
  58. ## Loading init Ramdisk from Legacy Image at 4fe00000 ...
  59. Image Name: uInitrd
  60. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  61. Data Size: 15228772 Bytes = 14.5 MiB
  62. Load Address: 00000000
  63. Entry Point: 00000000
  64. Verifying Checksum ... OK
  65. ## Flattened Device Tree blob at 4fa00000
  66. Booting using the fdt blob at 0x4fa00000
  67. EHCI failed to shut down host controller.
  68. Loading Ramdisk to 4917a000, end 49ffff64 ... OK
  69. Loading Device Tree to 0000000049109000, end 0000000049179fff ... OK
  70.  
  71. Starting kernel ...
  72.  
  73. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  74. [ 0.000000] Linux version 5.10.34-sunxi64 (root@hirsute) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #21.05.1 SMP Fri May 7 15:50:19 UTC 2021
  75. [ 0.000000] Machine model: OrangePi One Plus
  76. [ 0.000000] cma: Reserved 128 MiB at 0x0000000078000000
  77. [ 0.000000] NUMA: No NUMA configuration found
  78. [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff]
  79. [ 0.000000] NUMA: NODE_DATA [mem 0x77dd5100-0x77dd6fff]
  80. [ 0.000000] Zone ranges:
  81. [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
  82. [ 0.000000] DMA32 empty
  83. [ 0.000000] Normal empty
  84. [ 0.000000] Movable zone start for each node
  85. [ 0.000000] Early memory node ranges
  86. [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
  87. [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
  88. [ 0.000000] psci: probing for conduit method from DT.
  89. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  90. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  91. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  92. [ 0.000000] psci: SMC Calling Convention v1.1
  93. [ 0.000000] percpu: Embedded 22 pages/cpu s50584 r8192 d31336 u90112
  94. [ 0.000000] Detected VIPT I-cache on CPU0
  95. [ 0.000000] CPU features: detected: ARM erratum 845719
  96. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
  97. [ 0.000000] Policy zone: DMA
  98. [ 0.000000] Kernel command line: root=UUID=f3ac882e-1afb-4743-a26d-d9f18fd90a69 rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 consoleblank=0 loglevel=7 ubootpart=05d56c7c-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cgroup_enable=memory swapaccount=1
  99. [ 0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
  100. [ 0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
  101. [ 0.000000] printk: log_buf_len min size: 16384 bytes
  102. [ 0.000000] printk: log_buf_len: 32768 bytes
  103. [ 0.000000] printk: early log buf free: 14128(86%)
  104. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  105. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
  106. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  107. [ 0.000000] Memory: 860248K/1048576K available (13566K kernel code, 1058K rwdata, 4104K rodata, 2496K init, 352K bss, 57256K reserved, 131072K cma-reserved)
  108. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  109. [ 0.000000] rcu: Hierarchical RCU implementation.
  110. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  111. [ 0.000000] Tracing variant of Tasks RCU enabled.
  112. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  113. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  114. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  115. [ 0.000000] GIC: Using split EOI/Deactivate mode
  116. [ 0.000000] random: get_random_bytes called from start_kernel+0x368/0x51c with crng_init=0
  117. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  118. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  119. [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  120. [ 0.000313] Console: colour dummy device 80x25
  121. [ 0.000716] printk: console [tty1] enabled
  122. [ 0.000806] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  123. [ 0.000832] pid_max: default: 32768 minimum: 301
  124. [ 0.000931] LSM: Security Framework initializing
  125. [ 0.000965] Yama: becoming mindful.
  126. [ 0.001057] AppArmor: AppArmor initialized
  127. [ 0.001114] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
  128. [ 0.001137] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
  129. [ 0.002757] rcu: Hierarchical SRCU implementation.
  130. [ 0.003683] smp: Bringing up secondary CPUs ...
  131. [ 0.004463] Detected VIPT I-cache on CPU1
  132. [ 0.004528] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  133. [ 0.005151] Detected VIPT I-cache on CPU2
  134. [ 0.005193] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  135. [ 0.005758] Detected VIPT I-cache on CPU3
  136. [ 0.005792] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  137. [ 0.005867] smp: Brought up 1 node, 4 CPUs
  138. [ 0.005929] SMP: Total of 4 processors activated.
  139. [ 0.005942] CPU features: detected: 32-bit EL0 Support
  140. [ 0.005955] CPU features: detected: CRC32 instructions
  141. [ 0.022323] CPU: All CPU(s) started at EL2
  142. [ 0.022361] alternatives: patching kernel code
  143. [ 0.023751] devtmpfs: initialized
  144. [ 0.030088] Registered cp15_barrier emulation handler
  145. [ 0.030124] Registered setend emulation handler
  146. [ 0.030300] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  147. [ 0.030330] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  148. [ 0.034778] pinctrl core: initialized pinctrl subsystem
  149. [ 0.035953] NET: Registered protocol family 16
  150. [ 0.037907] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
  151. [ 0.038042] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  152. [ 0.038194] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  153. [ 0.038295] audit: initializing netlink subsys (disabled)
  154. [ 0.038473] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1
  155. [ 0.038981] thermal_sys: Registered thermal governor 'fair_share'
  156. [ 0.038986] thermal_sys: Registered thermal governor 'bang_bang'
  157. [ 0.039002] thermal_sys: Registered thermal governor 'step_wise'
  158. [ 0.039014] thermal_sys: Registered thermal governor 'user_space'
  159. [ 0.039454] cpuidle: using governor menu
  160. [ 0.039745] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  161. [ 0.039848] ASID allocator initialised with 65536 entries
  162. [ 0.040007] Serial: AMBA PL011 UART driver
  163. [ 0.060426] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  164. [ 0.060460] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  165. [ 0.060475] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  166. [ 0.060490] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  167. [ 0.062278] cryptd: max_cpu_qlen set to 1000
  168. [ 0.132240] raid6: neonx8 gen() 1637 MB/s
  169. [ 0.200294] raid6: neonx8 xor() 1227 MB/s
  170. [ 0.268369] raid6: neonx4 gen() 1675 MB/s
  171. [ 0.336433] raid6: neonx4 xor() 1211 MB/s
  172. [ 0.404500] raid6: neonx2 gen() 1591 MB/s
  173. [ 0.472569] raid6: neonx2 xor() 1115 MB/s
  174. [ 0.540641] raid6: neonx1 gen() 1389 MB/s
  175. [ 0.608706] raid6: neonx1 xor() 952 MB/s
  176. [ 0.676772] raid6: int64x8 gen() 1133 MB/s
  177. [ 0.744846] raid6: int64x8 xor() 596 MB/s
  178. [ 0.812922] raid6: int64x4 gen() 1264 MB/s
  179. [ 0.880990] raid6: int64x4 xor() 643 MB/s
  180. [ 0.949066] raid6: int64x2 gen() 1077 MB/s
  181. [ 1.017130] raid6: int64x2 xor() 568 MB/s
  182. [ 1.085223] raid6: int64x1 gen() 802 MB/s
  183. [ 1.153281] raid6: int64x1 xor() 416 MB/s
  184. [ 1.153293] raid6: using algorithm neonx4 gen() 1675 MB/s
  185. [ 1.153305] raid6: .... xor() 1211 MB/s, rmw enabled
  186. [ 1.153316] raid6: using neon recovery algorithm
  187. [ 1.154236] iommu: Default domain type: Translated
  188. [ 1.154564] SCSI subsystem initialized
  189. [ 1.154761] usbcore: registered new interface driver usbfs
  190. [ 1.154809] usbcore: registered new interface driver hub
  191. [ 1.154854] usbcore: registered new device driver usb
  192. [ 1.155147] pps_core: LinuxPPS API ver. 1 registered
  193. [ 1.155161] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  194. [ 1.155189] PTP clock support registered
  195. [ 1.155793] Advanced Linux Sound Architecture Driver Initialized.
  196. [ 1.156397] NetLabel: Initializing
  197. [ 1.156411] NetLabel: domain hash size = 128
  198. [ 1.156421] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  199. [ 1.156503] NetLabel: unlabeled traffic allowed by default
  200. [ 1.156923] clocksource: Switched to clocksource arch_sys_counter
  201. [ 1.157145] VFS: Disk quotas dquot_6.6.0
  202. [ 1.157214] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  203. [ 1.157835] AppArmor: AppArmor Filesystem Enabled
  204. [ 1.164411] NET: Registered protocol family 2
  205. [ 1.165045] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
  206. [ 1.165087] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
  207. [ 1.165175] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
  208. [ 1.165326] TCP: Hash tables configured (established 8192 bind 8192)
  209. [ 1.165449] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  210. [ 1.165493] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  211. [ 1.165671] NET: Registered protocol family 1
  212. [ 1.166225] RPC: Registered named UNIX socket transport module.
  213. [ 1.166242] RPC: Registered udp transport module.
  214. [ 1.166253] RPC: Registered tcp transport module.
  215. [ 1.166264] RPC: Registered tcp NFSv4.1 backchannel transport module.
  216. [ 1.166467] Trying to unpack rootfs image as initramfs...
  217. [ 1.935750] Freeing initrd memory: 14868K
  218. [ 1.936781] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  219. [ 1.942582] Initialise system trusted keyrings
  220. [ 1.942654] Key type blacklist registered
  221. [ 1.942793] workingset: timestamp_bits=44 max_order=18 bucket_order=0
  222. [ 1.948246] zbud: loaded
  223. [ 1.949757] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  224. [ 1.950473] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  225. [ 1.952517] integrity: Platform Keyring initialized
  226. [ 1.999673] xor: automatically using best checksumming function 32regs
  227. [ 1.999689] async_tx: api initialized (async)
  228. [ 1.999706] Key type asymmetric registered
  229. [ 1.999717] Asymmetric key parser 'x509' registered
  230. [ 1.999762] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  231. [ 1.999881] io scheduler mq-deadline registered
  232. [ 1.999896] io scheduler kyber registered
  233. [ 2.000010] io scheduler bfq registered
  234. [ 2.005263] sun50i-h6-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
  235. [ 2.016864] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
  236. [ 2.022024] cacheinfo: Unable to detect cache hierarchy for CPU 0
  237. [ 2.026860] loop: module loaded
  238. [ 2.028161] libphy: Fixed MDIO Bus: probed
  239. [ 2.028946] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  240. [ 2.028972] ehci-platform: EHCI generic platform driver
  241. [ 2.029418] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  242. [ 2.029442] ohci-platform: OHCI generic platform driver
  243. [ 2.030038] usbcore: registered new interface driver usb-storage
  244. [ 2.030515] mousedev: PS/2 mouse device common for all mice
  245. [ 2.031351] sun6i-rtc 7000000.rtc: registered as rtc0
  246. [ 2.031397] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:10 UTC (10)
  247. [ 2.031415] sun6i-rtc 7000000.rtc: RTC enabled
  248. [ 2.031519] i2c /dev entries driver
  249. [ 2.032373] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  250. [ 2.033738] sdhci: Secure Digital Host Controller Interface driver
  251. [ 2.033762] sdhci: Copyright(c) Pierre Ossman
  252. [ 2.033793] Synopsys Designware Multimedia Card Interface Driver
  253. [ 2.034380] sdhci-pltfm: SDHCI platform and OF driver helper
  254. [ 2.034534] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator
  255. [ 2.035168] ledtrig-cpu: registered to indicate activity on CPUs
  256. [ 2.035679] sun8i-ce 1904000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
  257. [ 2.035926] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  258. [ 2.036051] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  259. [ 2.036146] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  260. [ 2.036257] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  261. [ 2.036344] sun8i-ce 1904000.crypto: Register cbc(aes)
  262. [ 2.036486] sun8i-ce 1904000.crypto: Register ecb(aes)
  263. [ 2.036596] sun8i-ce 1904000.crypto: Register cbc(des3_ede)
  264. [ 2.036701] sun8i-ce 1904000.crypto: Register ecb(des3_ede)
  265. [ 2.036808] sun8i-ce 1904000.crypto: Register md5
  266. [ 2.036956] sun8i-ce 1904000.crypto: Register sha1
  267. [ 2.037070] sun8i-ce 1904000.crypto: Register sha224
  268. [ 2.037178] sun8i-ce 1904000.crypto: Register sha256
  269. [ 2.037283] sun8i-ce 1904000.crypto: Register sha384
  270. [ 2.037387] sun8i-ce 1904000.crypto: Register sha512
  271. [ 2.037491] sun8i-ce 1904000.crypto: Register stdrng
  272. [ 2.038166] sun8i-ce 1904000.crypto: CryptoEngine Die ID 0
  273. [ 2.038671] hid: raw HID events driver (C) Jiri Kosina
  274. [ 2.038805] usbcore: registered new interface driver usbhid
  275. [ 2.038819] usbhid: USB HID core driver
  276. [ 2.039545] random: fast init done
  277. [ 2.041085] random: crng init done
  278. [ 2.041408] NET: Registered protocol family 10
  279. [ 2.076273] Segment Routing with IPv6
  280. [ 2.076388] NET: Registered protocol family 17
  281. [ 2.076546] 8021q: 802.1Q VLAN Support v1.8
  282. [ 2.076702] 9pnet: Installing 9P2000 support
  283. [ 2.076779] Key type dns_resolver registered
  284. [ 2.077344] registered taskstats version 1
  285. [ 2.077365] Loading compiled-in X.509 certificates
  286. [ 2.081187] Loaded X.509 cert 'Build time autogenerated kernel key: bce3175d28c2f4ae5f78b85a0c8ebfe367ef589e'
  287. [ 2.084027] zswap: loaded using pool zstd/z3fold
  288. [ 2.084277] Key type ._fscrypt registered
  289. [ 2.084292] Key type .fscrypt registered
  290. [ 2.084303] Key type fscrypt-provisioning registered
  291. [ 2.085375] Btrfs loaded, crc32c=crc32c-generic
  292. [ 2.102037] Key type encrypted registered
  293. [ 2.102080] AppArmor: AppArmor sha1 policy hashing enabled
  294. [ 2.102126] ima: No TPM chip found, activating TPM-bypass!
  295. [ 2.102163] ima: Allocated hash algorithm: sha1
  296. [ 2.102199] ima: No architecture policies found
  297. [ 2.102251] evm: Initialising EVM extended attributes:
  298. [ 2.102264] evm: security.selinux
  299. [ 2.102274] evm: security.SMACK64
  300. [ 2.102283] evm: security.SMACK64EXEC
  301. [ 2.102292] evm: security.SMACK64TRANSMUTE
  302. [ 2.102301] evm: security.SMACK64MMAP
  303. [ 2.102311] evm: security.apparmor
  304. [ 2.102319] evm: security.ima
  305. [ 2.102328] evm: security.capability
  306. [ 2.102337] evm: HMAC attrs: 0x1
  307. [ 2.115464] sun8i-mixer 1100000.mixer: Adding to iommu group 0
  308. [ 2.120725] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
  309. [ 2.121223] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator
  310. [ 2.121770] printk: console [ttyS0] disabled
  311. [ 2.121863] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 31, base_baud = 1500000) is a 16550A
  312. [ 3.450557] printk: console [ttyS0] enabled
  313. [ 3.455812] sun4i-drm display-engine: Adding to iommu group 0
  314. [ 3.480471] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800010e14668)
  315. [ 3.488242] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800010e18990)
  316. [ 3.496339] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800010e0f890)
  317. [ 3.504752] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator
  318. [ 3.512933] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY)
  319. [ 3.523104] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver
  320. [ 3.530930] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800010e139a0)
  321. [ 3.538873] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
  322. [ 3.718822] Console: switching to colour frame buffer device 128x48
  323. [ 3.741897] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device
  324. [ 3.753210] sun50i_cpufreq_nvmem: Using CPU speed bin speed0
  325. [ 3.760038] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version
  326. [ 3.760150] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
  327. [ 3.767056] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PD regulator
  328. [ 3.782888] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
  329. [ 3.790025] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
  330. [ 3.798693] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
  331. [ 3.806010] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 70
  332. [ 3.813057] sun50i-h6-pinctrl 300b000.pinctrl: pin-70 (300b000.pinctrl:70) status -517
  333. [ 3.823599] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PD regulator
  334. [ 3.823859] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
  335. [ 3.830925] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
  336. [ 3.830934] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
  337. [ 3.855446] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
  338. [ 3.862782] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 70
  339. [ 3.869832] sun50i-h6-pinctrl 300b000.pinctrl: pin-70 (300b000.pinctrl:70) status -517
  340. [ 3.880347] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PD regulator
  341. [ 3.880605] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
  342. [ 3.887680] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
  343. [ 3.903537] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
  344. [ 3.912409] of_cfs_init
  345. [ 3.915059] of_cfs_init: OK
  346. [ 3.923764] ALSA device list:
  347. [ 3.932413] No soundcards found.
  348. [ 3.942759] Freeing unused kernel memory: 2496K
  349. [ 3.957005] Run /init as init process
  350. [ 4.300476] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
  351. [ 4.313346] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 70
  352. [ 4.325840] sun50i-h6-pinctrl 300b000.pinctrl: pin-70 (300b000.pinctrl:70) status -517
  353. [ 4.326516] panfrost 1800000.gpu: clock rate = 432000000
  354. [ 4.343543] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PD regulator
  355. [ 4.350162] panfrost 1800000.gpu: bus_clock rate = 100000000
  356. [ 4.362763] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
  357. [ 4.374014] panfrost 1800000.gpu: [drm:panfrost_devfreq_init [panfrost]] *ERROR* Couldn't set OPP regulators
  358. [ 4.386264] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
  359. [ 4.416323] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
  360. [ 4.432870] axp20x-i2c 1-0036: AXP20x variant AXP806 found
  361. [ 4.433150] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PD regulator
  362. [ 4.437758] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
  363. [ 4.437767] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 70
  364. [ 4.437773] sun50i-h6-pinctrl 300b000.pinctrl: pin-70 (300b000.pinctrl:70) status -517
  365. [ 4.441054] panfrost 1800000.gpu: clock rate = 432000000
  366. [ 4.441078] panfrost 1800000.gpu: bus_clock rate = 100000000
  367. [ 4.441183] panfrost 1800000.gpu: [drm:panfrost_devfreq_init [panfrost]] *ERROR* Couldn't set OPP regulators
  368. [ 4.441368] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PD regulator
  369. [ 4.441374] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
  370. [ 4.441380] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
  371. [ 4.443390] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
  372. [ 4.445922] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
  373. [ 4.456618] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 96
  374. [ 4.456628] sun50i-h6-pinctrl 300b000.pinctrl: pin-96 (5020000.ethernet) status -517
  375. [ 4.456637] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 96 (PD0) from group PD0 on device 300b000.pinctrl
  376. [ 4.456652] dwmac-sun8i 5020000.ethernet: Error applying setting, reverse things back
  377. [ 4.469163] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 70
  378. [ 4.658737] sun50i-h6-pinctrl 300b000.pinctrl: pin-70 (300b000.pinctrl:70) status -517
  379. [ 4.672875] input: axp20x-pek as /devices/platform/soc/7081400.i2c/i2c-1/1-0036/axp221-pek/input/input0
  380. [ 4.675118] panfrost 1800000.gpu: clock rate = 432000000
  381. [ 4.698384] panfrost 1800000.gpu: bus_clock rate = 100000000
  382. [ 4.709522] panfrost 1800000.gpu: [drm:panfrost_devfreq_init [panfrost]] *ERROR* Couldn't set OPP regulators
  383. [ 4.725089] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PD regulator
  384. [ 4.737749] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
  385. [ 4.750211] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
  386. [ 4.765278] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
  387. [ 4.765424] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PD regulator
  388. [ 4.792132] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 96
  389. [ 4.804512] sun50i-h6-pinctrl 300b000.pinctrl: pin-96 (5020000.ethernet) status -517
  390. [ 4.817698] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 96 (PD0) from group PD0 on device 300b000.pinctrl
  391. [ 4.834114] dwmac-sun8i 5020000.ethernet: Error applying setting, reverse things back
  392. [ 4.847950] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
  393. [ 4.860903] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 70
  394. [ 4.873588] sun50i-h6-pinctrl 300b000.pinctrl: pin-70 (300b000.pinctrl:70) status -517
  395. [ 4.888408] vdd-cpu: supplied by vcc-5v
  396. [ 4.890132] panfrost 1800000.gpu: clock rate = 432000000
  397. [ 4.909347] panfrost 1800000.gpu: bus_clock rate = 100000000
  398. [ 4.920908] panfrost 1800000.gpu: [drm:panfrost_devfreq_init [panfrost]] *ERROR* Couldn't set OPP regulators
  399. [ 4.936968] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PD regulator
  400. [ 4.937073] vdd-gpu: supplied by vcc-5v
  401. [ 4.950139] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 102
  402. [ 4.972849] sun50i-h6-pinctrl 300b000.pinctrl: pin-102 (300b000.pinctrl:102) status -517
  403. [ 4.987228] vdd-sys: Bringing 900000uV into 960000-960000uV
  404. [ 4.988308] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
  405. [ 4.988446] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PD regulator
  406. [ 4.988452] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 96
  407. [ 4.988458] sun50i-h6-pinctrl 300b000.pinctrl: pin-96 (5020000.ethernet) status -517
  408. [ 4.988465] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 96 (PD0) from group PD0 on device 300b000.pinctrl
  409. [ 4.988470] dwmac-sun8i 5020000.ethernet: Error applying setting, reverse things back
  410. [ 4.999341] vdd-sys: supplied by vcc-5v
  411. [ 5.093139] vcc-dram: supplied by vcc-5v
  412. [ 5.103622] vcc-pl: supplied by vcc-5v
  413. [ 5.113706] vcc-ac200: Bringing 700000uV into 3300000-3300000uV
  414. [ 5.125984] vcc-ac200: supplied by vcc-5v
  415. [ 5.136284] vcc25-dram: Bringing 700000uV into 3300000-3300000uV
  416. [ 5.148804] vcc25-dram: supplied by vcc-5v
  417. [ 5.159689] vcc-bias-pll: supplied by vcc-5v
  418. [ 5.170348] vcc-efuse-pcie-hdmi-io: supplied by vcc-5v
  419. [ 5.181736] vcc-dcxoio: Bringing 700000uV into 1800000-1800000uV
  420. [ 5.194266] vcc-dcxoio: supplied by vcc-5v
  421. [ 5.204729] bldo4: supplied by vcc-5v
  422. [ 5.214781] vcc-3v3: supplied by vcc-5v
  423. [ 5.224772] vcc-wifi-1: Bringing 700000uV into 3300000-3300000uV
  424. [ 5.236819] vcc-wifi-1: supplied by vcc-5v
  425. [ 5.246905] vcc-wifi-2: Bringing 700000uV into 3300000-3300000uV
  426. [ 5.258887] vcc-wifi-2: supplied by vcc-5v
  427. [ 5.268630] sw: supplied by regulator-dummy
  428. [ 5.278626] axp20x-i2c 1-0036: AXP20X driver loaded
  429. [ 5.291450] ehci-platform 5101000.usb: EHCI Host Controller
  430. [ 5.302498] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 1
  431. [ 5.315670] ehci-platform 5101000.usb: irq 34, io mem 0x05101000
  432. [ 5.340990] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00
  433. [ 5.352792] phy id_det change to host
  434. done.
  435.  
  436. [ 5.362074] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  437. [ 5.376019] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  438. [ 5.376028] usb usb1: Product: EHCI Host Controller
  439. [ 5.376033] usb usb1: Manufacturer: Linux 5.10.34-sunxi64 ehci_hcd
  440. [ 5.376037] usb usb1: SerialNumber: 5101000.usb
  441. [ 5.376798] hub 1-0:1.0: USB hub found
  442. [ 5.430190] hub 1-0:1.0: 1 port detected
  443. [ 5.431576] ehci-platform 5311000.usb: EHCI Host Controller
  444. [ 5.431600] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 2
  445. [ 5.431747] ehci-platform 5311000.usb: irq 36, io mem 0x05311000
  446. [ 5.456987] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00
  447. Begin: Mounting root file system ... Begin: Running /scripts/loc[ 5.491516] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  448. al-top ... done.
  449.  
  450. Begin: Running /scripts/local-premount ... Sc[ 5.491523] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  451. anning for Btrfs filesystems
  452.  
  453. done.
  454.  
  455. Begin: Waiting for root f[ 5.491528] usb usb2: Product: EHCI Host Controller
  456. ile system ... [ 5.491533] usb usb2: Manufacturer: Linux 5.10.34-sunxi64 ehci_hcd
  457. [ 5.491537] usb usb2: SerialNumber: 5311000.usb
  458. [ 5.492110] hub 2-0:1.0: USB hub found
  459. [ 5.557942] hub 2-0:1.0: 1 port detected
  460. [ 5.573100] ohci-platform 5101400.usb: Generic Platform OHCI controller
  461. [ 5.573140] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 3
  462. [ 5.573283] ohci-platform 5101400.usb: irq 35, io mem 0x05101400
  463. [ 5.637128] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
  464. [ 5.655608] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  465. [ 5.668132] usb usb3: Product: Generic Platform OHCI controller
  466. [ 5.679353] usb usb3: Manufacturer: Linux 5.10.34-sunxi64 ohci_hcd
  467. [ 5.690867] usb usb3: SerialNumber: 5101400.usb
  468. [ 5.701300] hub 3-0:1.0: USB hub found
  469. [ 5.710405] hub 3-0:1.0: 1 port detected
  470. [ 5.720792] ohci-platform 5311400.usb: Generic Platform OHCI controller
  471. [ 5.732871] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 4
  472. [ 5.746181] ohci-platform 5311400.usb: irq 37, io mem 0x05311400
  473. [ 5.821180] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
  474. [ 5.834932] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  475. [ 5.847626] usb usb4: Product: Generic Platform OHCI controller
  476. [ 5.859011] usb usb4: Manufacturer: Linux 5.10.34-sunxi64 ohci_hcd
  477. [ 5.870693] usb usb4: SerialNumber: 5311400.usb
  478. [ 5.880923] phy id_det change to host
  479. [ 5.890420] hub 4-0:1.0: USB hub found
  480. [ 5.899666] hub 4-0:1.0: 1 port detected
  481. [ 5.910291] usb_phy_generic usb_phy_generic.4.auto: supply vcc not found, using dummy regulator
  482. [ 6.097247] musb-hdrc musb-hdrc.5.auto: MUSB HDRC host driver
  483. [ 6.108506] musb-hdrc musb-hdrc.5.auto: new USB bus registered, assigned bus number 5
  484. [ 6.122050] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  485. [ 6.135739] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  486. [ 6.148326] usb usb5: Product: MUSB HDRC host driver
  487. [ 6.158601] usb usb5: Manufacturer: Linux 5.10.34-sunxi64 musb-hcd
  488. [ 6.170129] usb usb5: SerialNumber: musb-hdrc.5.auto
  489. [ 6.180989] hub 5-0:1.0: USB hub found
  490. [ 6.190128] hub 5-0:1.0: 1 port detected
  491. [ 6.200876] panfrost 1800000.gpu: clock rate = 432000000
  492. [ 6.211664] panfrost 1800000.gpu: bus_clock rate = 100000000
  493. [ 6.223281] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0
  494. [ 6.236382] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400
  495. [ 6.249882] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7
  496. [ 6.272451] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1
  497. [ 6.285212] [drm] Initialized panfrost 1.1.0 20180908 for 1800000.gpu on minor 1
  498. [ 6.299105] vcc-gmac-3v3: supplied by vcc-ac200
  499. [ 6.310527] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found
  500. [ 6.322611] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found
  501. [ 6.334430] dwmac-sun8i 5020000.ethernet: supply phy-io not found, using dummy regulator
  502. [ 6.348521] dwmac-sun8i 5020000.ethernet: PTP uses main clock
  503. [ 6.360014] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 50000)
  504. [ 6.375136] usb 4-1: new low-speed USB device number 2 using ohci-platform
  505. Begin: Running /scripts/local-block ... done.
  506.  
  507. [ 6.493166] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported
  508. [ 6.506307] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported
  509. [ 6.519331] dwmac-sun8i 5020000.ethernet: COE Type 2
  510. [ 6.529886] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported
  511. [ 6.542143] dwmac-sun8i 5020000.ethernet: Normal descriptors
  512. [ 6.553164] dwmac-sun8i 5020000.ethernet: Chain mode enabled
  513. [ 6.564625] libphy: stmmac: probed
  514. [ 6.594108] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
  515. [ 6.609173] sunxi-mmc 4020000.mmc: Got CD GPIO
  516. [ 6.644720] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
  517. [ 6.670976] usb 4-1: New USB device found, idVendor=13ba, idProduct=0018, bcdDevice= 0.01
  518. [ 6.684871] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  519. [ 6.694390] mmc0: host does not support reading read-only switch, assuming write-enable
  520. [ 6.697660] usb 4-1: Product: Barcode Reader
  521. [ 6.713333] mmc0: new high speed SDHC card at address 59b4
  522. [ 6.729014] input: Barcode Reader as /devices/platform/soc/5311400.usb/usb4/4-1/4-1:1.0/0003:13BA:0018.0001/input/input1
  523. [ 6.733984] mmcblk0: mmc0:59b4 USDU1 14.7 GiB
  524. [ 6.761918] mmcblk0: p1
  525. [ 6.809621] hid-generic 0003:13BA:0018.0001: input,hidraw0: USB HID v1.10 Keyboard [Barcode Reader ] on usb-5311400.usb-1/input0
  526. [ 6.840606] input: Barcode Reader Mouse as /devices/platform/soc/5311400.usb/usb4/4-1/4-1:1.1/0003:13BA:0018.0002/input/input2
  527. [ 6.865582] input: Barcode Reader System Control as /devices/platform/soc/5311400.usb/usb4/4-1/4-1:1.1/0003:13BA:0018.0002/input/input3
  528. [ 6.949363] input: Barcode Reader Consumer Control as /devices/platform/soc/5311400.usb/usb4/4-1/4-1:1.1/0003:13BA:0018.0002/input/input4
  529. [ 6.975779] hid-generic 0003:13BA:0018.0002: input,hidraw1: USB HID v1.10 Mouse [Barcode Reader ] on usb-5311400.usb-1/input1
  530. Begin: Running /scripts/local-block ... done.
  531.  
  532. done.
  533.  
  534. Begin: Will now check root file system ... fsck from util-linux 2.33.1
  535.  
  536. [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
  537.  
  538. /dev/mmcblk0p1: recovering journal
  539.  
  540. /dev/mmcblk0p1: Clearing orphaned inode 189567 (uid=1000, gid=1000, mode=0100644, size=420)
  541.  
  542. /dev/mmcblk0p1: Clearing orphaned inode 189580 (uid=1000, gid=1000, mode=0100644, size=420)
  543.  
  544. /dev/mmcblk0p1: clean, 176374/1106368 files, 1700874/3840000 blocks
  545.  
  546. done.
  547.  
  548. [ 8.848640] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
  549. done.
  550.  
  551. Begin: Running /scripts/local-bottom ... done.
  552.  
  553. Begin: Running /scripts/init-bottom ... done.
  554.  
  555. [ 9.915421] systemd[1]: System time before build time, advancing clock.
  556. [ 9.957587] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  557. [ 9.994508] systemd[1]: Detected architecture arm64.
  558.  
  559.  
  560. Welcome to Armbian 21.05.4 Buster!
  561.  
  562.  
  563.  
  564. [ 10.045095] systemd[1]: Set hostname to <orangepioneplus>.
  565. [ 10.670800] systemd[1]: /lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid → /run/samba/winbindd.pid; please update the unit file accordingly.
  566. [ 10.769862] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
  567. [ 10.819484] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
  568. [ 10.985054] systemd[1]: Reached target Remote File Systems.
  569. [ OK ] Reached target Remote File Systems.
  570.  
  571. [ 11.000520] systemd[1]: Listening on Journal Socket (/dev/log).
  572. [ OK ] Listening on Journal Socket (/dev/log).
  573.  
  574. [ 11.024010] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  575. [ OK ] Set up automount Arbitrary Executable File Formats File System Automount Point.[ 11.053435] systemd[1]: Created slice system-serial\x2dgetty.slice.
  576.  
  577.  
  578. [ OK ] Created slice system-serial\x2dgetty.slice.
  579.  
  580. [ OK ] Created slice system-getty.slice.
  581.  
  582. [ OK ] Created slice User and Session Slice.
  583.  
  584. [ OK ] Listening on initctl Compatibility Named Pipe.
  585.  
  586. [ OK ] Reached target Slices.
  587.  
  588. [ OK ] Reached target Swap.
  589.  
  590. [ OK ] Listening on Journal Audit Socket.
  591.  
  592. [ OK ] Listening on udev Kernel Socket.
  593.  
  594. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  595.  
  596. [ OK ] Reached target System Time Synchronized.
  597.  
  598. [ OK ] Listening on Journal Socket.
  599.  
  600. Starting Nameserver information manager...
  601.  
  602. Mounting POSIX Message Queue File System...
  603.  
  604. Mounting Kernel Debug File System...
  605.  
  606. Starting Load Kernel Modules...
  607.  
  608. Mounting Huge Pages File System...
  609.  
  610. Starting Create list of required static device nodes for the current kernel...
  611.  
  612. [ OK ] Listening on fsck to fsckd communication Socket.
  613.  
  614. Starting Set the console keyboard layout...
  615.  
  616. [ OK ] Listening on Syslog Socket.
  617.  
  618. [ OK ] Listening on udev Control Socket.
  619.  
  620. Starting udev Coldplug all Devices...
  621.  
  622. Starting Restore / save the current clock...
  623.  
  624. Starting Remount Root and Kernel File Systems...
  625.  
  626. [ OK ] Mounted POSIX Message Queue File System.
  627.  
  628. [ OK ] Mounted Kernel Debug File System.
  629.  
  630. [ OK ] Started Load Kernel Modules.
  631.  
  632. [ OK ] Mounted Huge Pages File System.
  633.  
  634. [ OK ] Started Create list of required static device nodes for the current kernel.
  635.  
  636. Mounting Kernel Configuration File System...
  637.  
  638. Starting Apply Kernel Variables...
  639.  
  640. [ OK ] Started Nameserver information manager.
  641.  
  642. [ OK ] Mounted Kernel Configuration File System.
  643.  
  644. [ OK ] Started Restore / save the current clock.
  645.  
  646. [ 11.425538] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
  647. [ OK ] Started Remount Root and Kernel File Systems.
  648.  
  649. Starting Load/Save Random Seed...
  650.  
  651. Starting Create System Users...
  652.  
  653. [ OK ] Started Apply Kernel Variables.
  654.  
  655. [ OK ] Started Load/Save Random Seed.
  656.  
  657. [ OK ] Started Create System Users.
  658.  
  659. Starting Create Static Device Nodes in /dev...
  660.  
  661. [ OK ] Started udev Coldplug all Devices.
  662.  
  663. Starting Helper to synchronize boot up for ifupdown...
  664.  
  665. [ OK ] Started Create Static Device Nodes in /dev.
  666.  
  667. Starting udev Kernel Device Manager...
  668.  
  669. [ OK ] Started Helper to synchronize boot up for ifupdown.
  670.  
  671. [ OK ] Started Set the console keyboard layout.
  672.  
  673. [ OK ] Reached target Local File Systems (Pre).
  674.  
  675. Mounting /tmp...
  676.  
  677. [ OK ] Mounted /tmp.
  678.  
  679. [ OK ] Reached target Local File Systems.
  680.  
  681. Starting Armbian ZRAM config...
  682.  
  683. Starting Enable support for additional executable binary formats...
  684.  
  685. Starting Load AppArmor profiles...
  686.  
  687. Starting Set console font and keymap...
  688.  
  689. Starting Tell Plymouth To Write Out Runtime Data...
  690.  
  691. Mounting Arbitrary Executable File Formats File System...
  692.  
  693. [ OK ] Started Set console font and keymap.
  694.  
  695. [ OK ] Mounted Arbitrary Executable File Formats File System.
  696.  
  697. [ OK ] Started Tell Plymouth To Write Out Runtime Data.
  698.  
  699. [ OK ] Started Enable support for additional executable binary formats.
  700.  
  701. [ OK ] Started udev Kernel Device Manager.
  702.  
  703. Starting Show Plymouth Boot Screen...
  704.  
  705. [ 12.301999] audit: type=1400 audit(1649633662.960:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=383 comm="apparmor_parser"
  706. [ 12.327783] audit: type=1400 audit(1649633662.972:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=382 comm="apparmor_parser"
  707. [ 12.353727] audit: type=1400 audit(1649633662.972:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=382 comm="apparmor_parser"
  708. [ 12.380827] audit: type=1400 audit(1649633662.992:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/chronyd" pid=380 comm="apparmor_parser"
  709. [ 12.408205] audit: type=1400 audit(1649633663.004:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=381 comm="apparmor_parser"
  710. [ 12.436745] audit: type=1400 audit(1649633663.012:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=394 comm="apparmor_parser"
  711. [ 12.466010] audit: type=1400 audit(1649633663.044:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=400 comm="apparmor_parser"
  712. [ 12.466026] audit: type=1400 audit(1649633663.044:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=400 comm="apparmor_parser"
  713. [ 12.466037] audit: type=1400 audit(1649633663.044:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=400 comm="apparmor_parser"
  714. [ OK ] Started Show Plymouth Boot Screen.
  715.  
  716. [ OK ] Reached target Local Encrypted Volumes.
  717.  
  718. [ OK ] Started Forward Password Requests to Plymouth Directory Watch.
  719.  
  720. [ 12.918826] audit: type=1400 audit(1649633663.576:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=393 comm="apparmor_parser"
  721. [ 12.994091] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 912000 KHz, changing to: 1080000 KHz
  722. [ OK ] Started Load AppArmor profiles.
  723.  
  724. [ 13.100818] zram: Added device: zram0
  725. [ 13.109196] zram: Added device: zram1
  726. [ 13.112381] mc: Linux media interface: v0.10
  727. [ 13.117599] zram: Added device: zram2
  728. Starting Raise network interfaces...
  729.  
  730. [ 13.166878] videodev: Linux video capture interface: v2.00
  731. [ OK ] Found device /dev/ttyS0.
  732.  
  733. [ 13.436992] Registered IR keymap rc-empty
  734. [ 13.445312] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0
  735. [ 13.449759] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned.
  736. [ 13.456713] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter
  737. [ 13.484502] cedrus 1c0e000.video-codec: Adding to iommu group 0
  738. [ 13.485716] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input5
  739. [ 13.506566] cedrus 1c0e000.video-codec: Device registered as /dev/video0
  740. [ 13.510799] sunxi-ir 7040000.ir: initialized sunXi IR driver
  741. [ 13.525099] zram0: detected capacity change from 0 to 516448256
  742. Starting Tell Plymouth To Write Out Runtime Data...
  743.  
  744. Starting Show Plymouth Boot Screen...
  745.  
  746. [ 13.661133] Adding 504340k swap on /dev/zram0. Priority:5 extents:1 across:504340k SSFS
  747. [ OK ] Created slice system-zram\x2dsetup.slice.
  748.  
  749. [ OK ] Started Tell Plymouth To Write Out Runtime Data.
  750.  
  751. [ OK ] Started Show Plymouth Boot Screen.
  752.  
  753. [ 13.847032] zram1: detected capacity change from 0 to 52428800
  754. [ OK ] Started Raise network interfaces.
  755.  
  756. [ OK ] Started Armbian ZRAM config.
  757.  
  758. Starting Armbian memory supported logging...
  759.  
  760. [ 13.987735] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard
  761. [ 13.999529] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
  762. [ 16.388512] systemd[1]: Started Armbian memory supported logging.
  763. [ OK ] Started Armbian memory supported lo[ 16.403368] systemd[1]: Starting Journal Service...
  764. gging.
  765.  
  766. Starting Journal Service...
  767.  
  768. [ 16.540717] systemd[1]: Started Journal Service.
  769. [ OK ] Started Journal Service.
  770.  
  771. Starting Flush Journal to Persistent Storage...
  772.  
  773. [ 16.587198] systemd-journald[636]: Received request to flush runtime journal from PID 1
  774. [ OK ] Started Flush Journal to Persistent Storage.
  775.  
  776. Starting Create Volatile Files and Directories...
  777.  
  778. [ OK ] Started Create Volatile Files and Directories.
  779.  
  780. [ OK ] Started Entropy daemon using the HAVEGE algorithm.
  781.  
  782. Starting Update UTMP about System Boot/Shutdown...
  783.  
  784. [ OK ] Started Update UTMP about System Boot/Shutdown.
  785.  
  786. [ OK ] Reached target System Initialization.
  787.  
  788. Starting Armbian hardware optimization...
  789.  
  790. [ OK ] Started CUPS Scheduler.
  791.  
  792. [ OK ] Reached target Paths.
  793.  
  794. [ OK ] Started Daily man-db regeneration.
  795.  
  796. [ OK ] Listening on D-Bus System Message Bus Socket.
  797.  
  798. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  799.  
  800. [ OK ] Started Daily Cleanup of Temporary Directories.
  801.  
  802. [ OK ] Listening on CUPS Scheduler.
  803.  
  804. [ OK ] Reached target Sockets.
  805.  
  806. [ OK ] Started Daily apt download activities.
  807.  
  808. [ OK ] Started Daily apt upgrade and clean activities.
  809.  
  810. [ OK ] Started Daily rotation of log files.
  811.  
  812. [ OK ] Reached target Timers.
  813.  
  814. Starting Armbian hardware monitoring...
  815.  
  816. [ OK ] Started Armbian hardware monitoring.
  817.  
  818. [ OK ] Started Armbian hardware optimization.
  819.  
  820. [ OK ] Reached target Basic System.
  821.  
  822. Starting Login Service...
  823.  
  824. [ OK ] Started CUPS Scheduler.
  825.  
  826. Starting LSB: Load kernel modules needed to enable cpufreq scaling...
  827.  
  828. Starting Disk Manager...
  829.  
  830. Starting Resets System Activity Data Collector...
  831.  
  832. Starting Modem Manager...
  833.  
  834. [ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon.
  835.  
  836. Starting Setup zram based device zram2...
  837.  
  838. Starting Avahi mDNS/DNS-SD Stack...
  839.  
  840. Starting System Logging Service...
  841.  
  842. [ OK ] Started D-Bus System Message Bus.
  843.  
  844. Starting WPA supplicant...
  845.  
  846. Starting Network Manager...
  847.  
  848. Starting rng-tools.service...
  849.  
  850. Starting Setup zram based device zram0...
  851.  
  852. [ OK ] Started Regular background program processing daemon.
  853.  
  854. Starting Setup zram based device zram1...
  855.  
  856. Starting Dispatcher daemon for systemd-networkd...
  857.  
  858. [ OK ] Started Resets System Activity Data Collector.
  859.  
  860. [ OK ] Started Login Service.
  861.  
  862. [ OK ] Started System Logging Service.
  863.  
  864. [ OK ] Started rng-tools.service.
  865.  
  866. [ OK ] Started Setup zram based device zram2.
  867.  
  868. [ OK ] Started Setup zram based device zram0.
  869.  
  870. [ OK ] Started Setup zram based device zram1.
  871.  
  872. [ OK ] Started Avahi mDNS/DNS-SD Stack.
  873.  
  874. [ OK ] Started WPA supplicant.
  875.  
  876. [ OK ] Started Make remote CUPS printers available locally.
  877.  
  878. Starting Authorization Manager...
  879.  
  880. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
  881.  
  882. Starting LSB: set CPUFreq kernel parameters...
  883.  
  884. [ OK ] Started LSB: set CPUFreq kernel parameters.
  885.  
  886. Starting LSB: Set sysfs variables from /etc/sysfs.conf...
  887.  
  888. [ OK ] Started Network Manager.
  889.  
  890. [ OK ] Reached target Network.
  891.  
  892. Starting Permit User Sessions...
  893.  
  894. Starting OpenBSD Secure Shell server...
  895.  
  896. [ OK ] Reached target Network is Online.
  897.  
  898. Starting LSB: Advanced IEEE 802.11 management daemon...
  899.  
  900. Starting LSB: exim Mail Transport Agent...
  901.  
  902. Starting Samba NMB Daemon...
  903.  
  904. Starting chrony, an NTP client/server...
  905.  
  906. Starting /etc/rc.local Compatibility...
  907.  
  908. Starting OpenVPN service...
  909.  
  910. [ OK ] Started Unattended Upgrades Shutdown.
  911.  
  912. [ OK ] Started vnStat network traffic monitor.
  913.  
  914. [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
  915.  
  916. [ OK ] Started Permit User Sessions.
  917.  
  918. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
  919.  
  920. [ OK ] Started /etc/rc.local Compatibility.
  921.  
  922. [ OK ] Started OpenVPN service.
  923.  
  924. [ OK ] Started Authorization Manager.
  925.  
  926. Starting Hostname Service...
  927.  
  928. Starting Light Display Manager...
  929.  
  930. Starting Hold until boot process finishes up...
  931.  
  932. [ OK ] Started OpenBSD Secure Shell server.
  933.  
  934. [ OK ] Started chrony, an NTP client/server.
  935.  
  936. [ OK ] Started Hostname Service.
  937.  
  938. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  939.  
  940. Starting Network Manager Script Dispatcher Service...
  941.  
  942. [ OK ] Started Disk Manager.
  943.  
  944. [ OK ] Started Network Manager Script Dispatcher Service.
  945.  
  946. [ 20.622892] dwmac-sun8i 5020000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
  947. [ 20.636988] dwmac-sun8i 5020000.ethernet eth0: No Safety Features support found
  948. [ 20.646627] dwmac-sun8i 5020000.ethernet eth0: No MAC Management Counters available
  949. [ 20.656642] dwmac-sun8i 5020000.ethernet eth0: PTP not supported by HW
  950. [ 20.665899] dwmac-sun8i 5020000.ethernet eth0: configuring for phy/rgmii-id link mode
  951. [ 24.773917] dwmac-sun8i 5020000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  952. [ 24.782275] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  953. [ 24.938731] broken atomic modeset userspace detected, disabling atomic
  954.  
  955.  
  956. Armbian 21.05.4 Buster ttyS0
  957.  
  958. orangepioneplus login: [ 31.277814] fuse: init (API version 7.32)
  959.  
  960.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!