Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [root@freenas /mnt/lager1/homes/tore]# smartctl -a /dev/ada1
- smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.14 (AF)
- Device Model: ST3000DM001-1ER166
- Serial Number: W5005NNP
- LU WWN Device Id: 5 000c50 07853514a
- Firmware Version: CC43
- User Capacity: 3,000,592,982,016 bytes [3.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Wed Apr 25 08:33:15 2018 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- See vendor-specific Attribute list for marginal Attributes.
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 80) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 330) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x1085) SCT Status supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 106 099 006 Pre-fail Always - 173474512
- 3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 41
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 32
- 7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always - 8811474005
- 9 Power_On_Hours 0x0032 067 067 000 Old_age Always - 29572
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 41
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 188 Command_Timeout 0x0032 087 087 000 Old_age Always - 19 19 19
- 189 High_Fly_Writes 0x003a 098 098 000 Old_age Always - 2
- 190 Airflow_Temperature_Cel 0x0022 057 045 045 Old_age Always In_the_past 43 (Min/Max 31/43)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 34
- 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 131
- 194 Temperature_Celsius 0x0022 043 055 000 Old_age Always - 43 (0 20 0 0 0)
- 197 Current_Pending_Sector 0x0012 085 085 000 Old_age Always - 2464
- 198 Offline_Uncorrectable 0x0010 085 085 000 Old_age Offline - 2464
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 29572h+12m+56.319s
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 15592600404
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 336932848805
- SMART Error Log Version: 1
- ATA Error Count: 1
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 1 occurred at disk power-on lifetime: 23336 hours (972 days + 8 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 04 71 03 80 04 11 40
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- ea 00 00 00 00 00 40 00 13d+22:49:17.258 FLUSH CACHE EXT
- 61 00 08 ff ff ff 4f 00 13d+22:49:17.257 WRITE FPDMA QUEUED
- 61 00 08 ff ff ff 4f 00 13d+22:49:17.257 WRITE FPDMA QUEUED
- 61 00 08 88 03 40 40 00 13d+22:49:17.257 WRITE FPDMA QUEUED
- 61 00 08 88 01 40 40 00 13d+22:49:17.257 WRITE FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 70 -
- # 2 Short offline Completed without error 00% 58 -
- # 3 Short offline Completed without error 00% 46 -
- # 4 Short offline Completed without error 00% 34 -
- # 5 Short offline Completed without error 00% 22 -
- # 6 Short offline Completed without error 00% 10 -
- # 7 Short offline Completed without error 00% 7 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement