[2018-10-22 00:05:04] [Output] : ★ Leon Shaw reaches down,grabbing the first set of stickers.
[2018-10-22 00:05:18] [Output] : ★ Leon Shaw holds it up,turning towards the heli, nodding a few times.
[2018-10-22 00:05:31] [Output] : ★ Leon Shaw reaches down,grabbing his heatgun,and scraper.
[2018-10-22 00:05:34] [Output] : You picked up a Viozy Triumph Angled Scraper.
[2018-10-22 00:05:34] [Output] : * Leon Shaw bends over and picks up a Viozy Triumph Angled Scraper. *
[2018-10-22 00:05:37] [Output] : You picked up a Maplin 2000W Heat Gun.
[2018-10-22 00:05:37] [Output] : * Leon Shaw bends over and picks up a Maplin 2000W Heat Gun. *
[2018-10-22 00:06:09] [Output] : ★ Leon Shaw walks to the passenger rear sliding door, laying the sticker ontop, turning on his heatgun,-
[2018-10-22 00:06:28] [Output] : ★ allowing it to warm up, while he slowly peels the rear piece off of the wrapping,      ((Leon Shaw))
[2018-10-22 00:06:57] [Output] : ★ prior to carefully starting to apply the passenger rear door sticker,unwrapping the back pi-      ((Leon Shaw))
[2018-10-22 00:07:01] [Output] : ★ piece as he does such.      ((Leon Shaw))
[2018-10-22 00:07:20] [Output] : ★ Leon Shaw would grab the heat gun, slowly heating up the edges, working his way  down.
[2018-10-22 00:08:06] [Output] : ★ Leon Shaw grabs his scraper from his pocket,slowly pushing out the bubbles to the corners.
[2018-10-22 00:08:23] [Output] : ★ Leon Shaw would have installed the door on the passenger side correctly,nodding a few times.
[2018-10-22 00:08:42] [Output] : ★ Leon Shaw grabs the wrap for the tail of the helicopter.walking with it.
[2018-10-22 00:08:58] [Output] : ★ Leon Shaw tosses the wrapping overtop the rear of the heli.
[2018-10-22 00:09:13] [Output] : ★ Leon Shaw slowly begins unwrapping the back piece,assuring his lines are strait.
[2018-10-22 00:09:37] [Output] : ★ slowly unrolling the entire length of the bottom of the sticker onto the heli-      ((Leon Shaw))
[2018-10-22 00:10:09] [Output] : ★ -prior to peeling upwards,sliding the sticker up and over to the other side.      ((Leon Shaw))
[2018-10-22 00:10:16] [Output] : ★ Leon Shaw walks to the other side of the heli rear.
[2018-10-22 00:10:40] [Output] : ★ Leon Shaw grips the wrapping, slowly pulling each side, slowly unwrapping the stickers onto the rear.
[2018-10-22 00:10:55] [Output] : ★ Leon Shaw would grab his heatgun,slowly heating up around the bubbles.
[2018-10-22 00:11:15] [Output] : ★ Leon Shaw would walk around both sides, using his rubber scraper to push the bubbles out of the decal.
[2018-10-22 00:11:25] [Output] : ★ Leon Shaw walks to the decal pile.
[2018-10-22 00:11:45] [Output] : ★ Leon Shaw grabs the driver rear sliding door, sighing, quickly walking to the door.
[2018-10-22 00:12:04] [Output] : ★ Leon Shaw grabs the corner of the sticker,slowly unwrapping it.
[2018-10-22 00:12:17] [Output] : ★ Leon Shaw places it strait on the edge of the door, slowly unwrapping downwards at a 45-
[2018-10-22 00:12:26] [Output] : ★ allowing the sticker to go on strait.      ((Leon Shaw))
[2018-10-22 00:12:42] [Output] : ★ Leon Shaw would grab his scraper,carefully pushing all remaining bubbles from the door.
[2018-10-22 00:13:03] [Output] : ★ Leon Shaw grabs the front piece of the wrap, walking towards the front of the heli.
[2018-10-22 00:13:35] [Output] : ★ Leon Shaw peels the very edge of the wrapping,slowly sticking it to the edge of the heli.
[2018-10-22 00:13:52] [Output] : ★ Leon Shaw would slowly walk around the front,unpeeling and sticking the sticker onto the edge--
[2018-10-22 00:13:56] [Output] : ★ about 2 inches worth.      ((Leon Shaw))
[2018-10-22 00:14:14] [Output] : ★ Leon Shaw walks around to the other side, slowly peeling off the rest of the sticker,assuring to be v-
[2018-10-22 00:14:21] [Output] : ★ very careful in doing so.      ((Leon Shaw))
[2018-10-22 00:14:49] [Output] : ★ Leon Shaw would grab his scraper, slowly nudging out all of the air pockets in the wrapping.
[2018-10-22 00:15:22] [Output] : ★ Leon Shaw runs over to the sticker pile,finding the passenger front door sticker.
[2018-10-22 00:15:26] [Output] : ★ Leon Shaw runs back to the heli,
[2018-10-22 00:16:24] [Output] : ★ Leon Shaw slowly unwraps some of the corner of the door piece.
[2018-10-22 00:16:36] [Output] : ★ Leon Shaw sticks it to the top of the door,using his thumb to apply it downwards.
[2018-10-22 00:17:57] [Output] : ★ Leon Shaw would continue down the door, slowly peeling away the remaining wrap.
[2018-10-22 00:18:57] [Output] : ★ Leon Shaw reaches into his pocket,removing the scraper.
[2018-10-22 00:19:22] [Output] : ★ Leon Shaw would slowly use the scraper to nudge the air pockets to the corner of the sticker,removing-
[2018-10-22 00:19:32] [Output] : ★ them,creating a smooth surface.      ((Leon Shaw))
[2018-10-22 00:19:39] [Output] : ★ Leon Shaw pockets the scraper.
[2018-10-22 00:19:48] [Output] : ★ Leon Shaw walks to the sticker pile,grabbing the driver front sticker.walking back.
[2018-10-22 00:20:46] [Output] : ★ Leon Shaw unwraps the edge of the sticker, using his thumb to slide the wrapping down.
[2018-10-22 00:21:04] [Output] : ★ apon getting to the edge of the sticker, Leon grabs the other corners, slowly rolling it out      ((Leon Shaw))
[2018-10-22 00:21:22] [Output] : ★ Leon Shaw would kneel as he continues down the chopper, as the sticker would finish peeling.
[2018-10-22 00:21:51] [Output] : ★ Leon Shaw reaches into his pocket,removing his scraper,
[2018-10-22 00:22:00] [Output] : ★ Leon Shaw would angle it,slowly pushing the bubbles out of the sticker.
[2018-10-22 00:24:37] [Output] : ★ Leon Shaw grabs the rear rotor sticker.
[2018-10-22 00:25:45] [Output] : ★ Leon Shaw slowly peels the edge of the sticker, sticking the edge of the sticker onto the rear rotor.
[2018-10-22 00:26:16] [Output] : ★ Leon Shaw slowly rolls out the sticker,slowly assuring he gets it even.
[2018-10-22 00:26:46] [Output] : ★ Leon Shaw would reach the end the sticker,slowly using his hand to stick the last bit on.
[2018-10-22 00:27:46] [Output] : ★ Leon Shaw reaches into his pocket,removing his scraper, slowly walking along the edge,pushing the -
[2018-10-22 00:28:10] [Output] : ★ bubbles out of the sticker,pushing them into the corner,removing them.      ((Leon Shaw))
[2018-10-22 00:28:35] [Output] : ★ Leon Shaw walks to the edge of the sticker pile,grabbing the last sticker.
[2018-10-22 00:28:50] [Output] : ★ Leon Shaw walks to the edge of the heli,using the rotor to boost himself onto the back.
[2018-10-22 00:29:03] [Output] : ★ Leon Shaw slowly walks along the edge of the heli, to the very top of the main rotors.
[2018-10-22 00:29:30] [Output] : ★ Leon Shaw slowly unpeels a quarter of the sticker.
[2018-10-22 00:29:59] [Output] : ★ Leon Shaw slowly begins rolling the sticker onto the heli
[2018-10-22 00:30:13] [Output] : ★ Leon Shaw walks backwards,slowly rolling out the sticker.
[2018-10-22 00:30:44] [Output] : ★ Leon Shaw continues slowly wrapping around the engines, assuring he doesnt get it un-even
[2018-10-22 00:30:56] [Output] : ★ Leon Shaw takes a deep breath, slowly peeling around the rotor.
[2018-10-22 00:31:44] [Output] : ★ Leon Shaw would slowly take steps back,as he carefully slides the stickers on.
[2018-10-22 00:32:25] [Output] : ★ Leon Shaw would finish the very top of the sticker wrap, tossing the garage aside,
[2018-10-22 00:32:31] [Output] : ★ Leon Shaw uses his hand,slowly pushing it down.
[2018-10-22 00:32:45] [Output] : ★ Leon Shaw reaches into his pocket,removing his scraper,going along the very top of the heli,removing -
[2018-10-22 00:32:55] [Output] : ★ all of the bumps and air pockets from the edges.      ((Leon Shaw))
[2018-10-22 00:33:12] [Output] : ★ Leon Shaw would slowly come to the edge of the front of the helicopter,removing the final air pocket.
[2018-10-22 00:33:20] [Output] : * Leon Shaw smiles,looking to his work. *
[2018-10-22 00:33:30] [Output] : ★ Leon Shaw carefully slides down the edge of the heli,landing on his feet.
[2018-10-22 00:33:35] [Output] : ★ helicopter would be wrapped.      ((Leon Shaw))