'94 Chevy K5 Blazer Chop

2018-07-21 22:25:57 ★ Enzo Reyes brings his tool box closer to the vehicle, grabbing an air wrench and setting it aside.
2018-07-21 22:27:10 ★ Enzo Reyes picks up the air wrench and slides on a 1/2 socket onto it, stepping into the vehicle.
2018-07-21 22:27:24 ★ Enzo Reyes starts to use the air wrench to remove the bolts holding together the dashboard of-
2018-07-21 22:27:27 ★ the vehicle.      ((Enzo Reyes))
2018-07-21 22:27:41 ★ Enzo Reyes removes all the bolts around the bottom and top end, along with those aroudn the centre-
2018-07-21 22:27:49 ★ console, making sure he didn't miss a single bolt.      ((Enzo Reyes))
2018-07-21 22:28:06 ★ Enzo Reyes steps out and picks up a 1/2 and 9/16 wrench, walking towards the front of the vehicle.
2018-07-21 22:28:17 ★ Enzo Reyes removes a plastic cover revealing the vehicles battery.
2018-07-21 22:28:35 ★ Enzo Reyes uses the 1/2 and 9/16 wrenches simultaneously to take off the + and - cables from-
2018-07-21 22:28:44 ★ the battery, leaving the vehicle without any electricity.      ((Enzo Reyes))
2018-07-21 22:29:05 ★ Enzo Reyes steps back into the vehicle, starting to remove the plastic dashboard components from-
2018-07-21 22:29:09 ★ the vehicle, tossing them out the car.      ((Enzo Reyes))
2018-07-21 22:29:52 ★ Enzo Reyes picks up his wire cutter and starts cutting away on any suspicious wiring, mostly -
2018-07-21 22:29:59 ★ unconnecting any wire he sees.      ((Enzo Reyes))
2018-07-21 22:30:17 ★ Enzo Reyes eyes the fusebox and removes every single fuse from the box, tossing them onto the floor.
2018-07-21 22:30:45 ★ Enzo Reyes starts to disassemble the old ECU from the vehicle, deconnecting it and throwing it away.

2018-07-23 18:55:27 ★ The Blazer would be on a ramp.      ((Enzo Reyes))
2018-07-23 18:55:40 ★ Enzo Reyes slips on a pair of industrial work gloves.
2018-07-23 18:57:37 ★ Enzo Reyes brings his toolbox next to the ramp, setting it down as he'd kneel next to it, opening it.
2018-07-23 18:57:57 ★ Brandishes various tools inside the toolbox, pretty much everything a mechanic would need.      ((Enzo Reyes))
2018-07-23 18:58:20 ★ Enzo Reyes reaches into the toolbox, grabbing a flathead and a phillips screwdriver, stepping up to-
2018-07-23 18:58:23 ★ the front of the vehicle.      ((Enzo Reyes))
2018-07-23 18:58:52 ★ Enzo Reyes pops the hood up and leans into the vehicle, reaching towards the left headlight from-
2018-07-23 18:58:54 ★ within.      ((Enzo Reyes))
2018-07-23 18:59:19 ★ Enzo Reyes uses his flathead screwdriver to disassemble the screws holding the front left headlight-
2018-07-23 18:59:24 ★ attached to the vehicle.      ((Enzo Reyes))
2018-07-23 18:59:34 ★ Enzo Reyes removes the screws and pops the headlight out forwards slightly.
2018-07-23 18:59:56 ★ Enzo Reyes steps off from leaning over the hood as he'd grab the popped out headlight, using-
2018-07-23 19:00:31 ★ the flathead screwdriver to force off some metal clips off of the large rubber wiring -      ((Enzo Reyes))
2018-07-23 19:00:38 ★ on the backside of the headlight.      ((Enzo Reyes))
2018-07-23 19:00:45 ★ Enzo Reyes removes it to reveal the main wiring.
2018-07-23 19:00:58 ★ Enzo Reyes disconnects the wiring plugs from the headlight to be able to completely remove the-
2018-07-23 19:01:05 ★ headlight from the vehicle, setting it aside.      ((Enzo Reyes))
2018-07-23 19:01:54 ★ Enzo Reyes would also proceed to use the flathead screwdriver to pry off the metal clasps holding-
2018-07-23 19:02:04 ★ the blinker from the left side of the fender.      ((Enzo Reyes))
2018-07-23 19:02:19 ★ Enzo Reyes disconnects the electric wiring and takes out the front right blinker.
2018-07-23 19:02:36 ★ Enzo Reyes shifts himself to the right side of the vehicle, front  -- uses his screwdrivers to once-
2018-07-23 19:02:55 ★ more remove the screws holding the headlight in place, from within.      ((Enzo Reyes))
2018-07-23 19:03:07 ★ Enzo Reyes pushes the headlight out slightly and would use the flathead screwdriver to remove-
2018-07-23 19:03:28 ★ the rubber wiring cap in order to reveal the electric wiring of the headlight.      ((Enzo Reyes))
2018-07-23 19:03:44 ★ Enzo Reyes proceeds to disconnect the electric wiring of the headlight thus making it possible-
2018-07-23 19:03:54 ★ to completely take out the headlight and set it aside.      ((Enzo Reyes))
2018-07-23 19:04:19 ★ Using his flathead screwdriver, Enzo would remove the front right blinker from the vehicle-      ((Enzo Reyes))
2018-07-23 19:04:31 ★ also disconnecting the electric wiring from it before tossing the part aside.      ((Enzo Reyes))
2018-07-23 19:04:51 ★ Enzo Reyes moves towards the toolbox as he'd lean forwards and reach inside it -- grabbing ahold-
2018-07-23 19:05:03 ★ of a1/2 key along with a 9/16 key and a small hammer.      ((Enzo Reyes))
2018-07-23 19:06:16 ★ Enzo Reyes reaches under the vehicle towards the front bumper, banging it to the side, front inside-
2018-07-23 19:06:33 ★ using the small hammer rather gently, only to shift it aside slightly and make it possible-      ((Enzo Reyes))
2018-07-23 19:06:46 ★ to remove it afterwards due to the slight damage it has.      ((Enzo Reyes))
2018-07-23 19:07:04 ★ Enzo Reyes would use the same actions on the other side of the bumper, administrating -
2018-07-23 19:07:12 ★ 3 light bangs with the small hammer.      ((Enzo Reyes))
2018-07-23 19:07:26 ★ Enzo Reyes proceeds to reach up with the 1/2 key, placing it onto each bolt and holding it firmly-
2018-07-23 19:07:55 ★ whilst using the 9/16 key to turn the nuts of each bolt counter-clockwise - thus removing-      ((Enzo Reyes))
2018-07-23 19:08:09 ★ the nut from the bolts, sliding the bolts out.      ((Enzo Reyes))
2018-07-23 19:08:29 ★ Enzo Reyes continues to do these actions until he takes out each bolt holding the bumper attached-
2018-07-23 19:08:34 ★ to the car's body.      ((Enzo Reyes))
2018-07-23 19:08:52 ★ Enzo Reyes grabs ahold firmly of the bumper, pulling on it forcefully to unattach it from the vehicle-
2018-07-23 19:09:05 ★ placing it aside afterwards gently against the wall.      ((Enzo Reyes))
2018-07-23 19:09:37 ★ Enzo Reyes walks up to the air compressor and turns it on, connect an air wrench to its air hose.
2018-07-23 19:10:44 ★ Enzo Reyes pops on a 5/8 socket accessory onto the air wrench.
2018-07-23 19:11:08 ★ Enzo Reyes walks up to the front of the vehicle once more, reaching from within to the bolts holding-
2018-07-23 19:11:15 ★ the grill attached.      ((Enzo Reyes))
2018-07-23 19:11:28 ★ Enzo Reyes places the air wrench and socket onto each bolt, pressing down on the trigger to loosen-
2018-07-23 19:11:41 ★ them completely and removing them afterwards, letting them fall down onto the ground.      ((Enzo Reyes))
2018-07-23 19:14:17 ★ After removing every bolt, Enzo pulls off the grill and sets it aside, next to the other -      ((Enzo Reyes))
2018-07-23 19:14:18 ★ parts.      ((Enzo Reyes))
2018-07-23 19:15:03 ★ Enzo Reyes changes out the socket on the air wrench with a much larger one, 7/8" one.
2018-07-23 19:15:28 ★ Enzo Reyes picks up the crowbar from nearby and places it inbetween the hood and engine -
2018-07-23 19:15:46 ★ propping it forcefully to hold the hood up as Enzo proceeds to disassemble it.      ((Enzo Reyes))
2018-07-23 19:16:01 ★ Enzo Reyes climbs up onto the ramp and sits up onto the engine, bringing his air wrench with him.
2018-07-23 19:16:24 ★ Enzo Reyes uses the tool on the hood, loosening the 4 large bolts on each side of the hood which-
2018-07-23 19:16:32 ★ are holding the hinges connected to the actual metal hood.      ((Enzo Reyes))
2018-07-23 19:16:50 ★ Enzo Reyes places one hand up against the hood just incase before compeltely slidding out each-
2018-07-23 19:16:56 ★ bolt from the hood's hinges.      ((Enzo Reyes))
2018-07-23 19:17:17 ★ Enzo Reyes slowly moves back and steps off the hood of the vehicle, removing the crobar aswell-
2018-07-23 19:17:39 ★ as he'd let the hood fall down, unattached from the hinges, falling shut on top of the engin      ((Enzo Reyes))
2018-07-23 19:17:43 ★ -engine.      ((Enzo Reyes))
2018-07-23 19:17:59 ★ Enzo Reyes proceeds to extend both his arms across the side of the hood, forcefully slidding it off-
2018-07-23 19:18:12 ★ the vehicle while emitting a few grunts, letting it fall onto the ground and pulling it -      ((Enzo Reyes))
2018-07-23 19:18:24 ★ aside to the nearby wall where he'd prop it up.      ((Enzo Reyes))
2018-07-23 19:19:13 ★ Enzo Reyes uses the incorporated jacks on the ramp to raise the car up slightly only to leave it -
2018-07-23 19:19:22 ★ hovering off the ramp, making it able to remove the wheels.      ((Enzo Reyes))
2018-07-23 19:31:10 ★ Enzo Reyes switches the socket on the air wrench with a 3/4" one.
2018-07-23 19:31:52 ★ Enzo Reyes moves infront of the front right wheel, placing the socket individually on each nut -
2018-07-23 19:31:58 ★ , using the wrench to remove it.      ((Enzo Reyes))
2018-07-23 19:32:06 ★ Enzo Reyes moves infront of the front left wheel, placing the socket individually on each nut -
2018-07-23 19:32:10 ★ using the wrench to remove it.      ((Enzo Reyes))
2018-07-23 19:32:21 ★ Enzo Reyes moves infront of the back left wheel, placing the socket individually on each nut -
2018-07-23 19:32:24 ★ using the wrench to remove it.      ((Enzo Reyes))
2018-07-23 19:32:28 ★ Enzo Reyes moves infront of the back right wheel, placing the socket individually on each nut -
2018-07-23 19:32:30 ★ using the wrench to remove it.      ((Enzo Reyes))
2018-07-23 19:32:53 ★ Enzo Reyes grabs ahold of each one of the four wheels individually, taking them off the vehicle -
2018-07-23 19:33:17 ★ dropping them onto the ground and rolling them aside, stacking them on top of eachother.      ((Enzo Reyes))
2018-07-23 19:34:00 ★ Enzo Reyes grabs a large metal pan, slidding it under the vehicle, directly under the engine's oil-
2018-07-23 19:34:01 ★ tank.      ((Enzo Reyes))
2018-07-23 19:34:54 ★ Enzo Reyes grabs ahold of a monkey wrench, adjusting it's size accordingly to fit onto the plug -
2018-07-23 19:35:05 ★ underneath the engine.      ((Enzo Reyes))
2018-07-23 19:35:24 ★ Enzo Reyes carefully removes the plug, letting all the engine oil spill out of the engine tank and into
2018-07-23 19:35:36 ★ the large metal pan below, filling it up almost all the way.      ((Enzo Reyes))
2018-07-23 19:35:49 ★ Enzo Reyes proceeds to slide the metal pan away, slowly to not spill any oil.
2018-07-23 19:36:11 ★ Enzo Reyes grabs a socket wrench with a 3/4 socket and a 5/8 wrench, moving under the vehicle.
2018-07-23 19:36:34 ★ Enzo Reyes reaches up to the connecting axle from the transmission to the back differential-
2018-07-23 19:36:57 ★ Enzo Reyes uses the 5/8 wrench on the two bolts holding the axle attached on each side -
2018-07-23 19:37:08 ★ removing them carefully and placing the aside before grabbing the socket wrench with-      ((Enzo Reyes))
2018-07-23 19:37:27 ★ the 3/4 socket, using it rather rapidly to loosen the rest of the bolts to completely -      ((Enzo Reyes))
2018-07-23 19:37:39 ★ release the axle from the transmission and differential, quickly dropping his tools.      ((Enzo Reyes))
2018-07-23 19:38:08 ★ Enzo Reyes instinctively reaches up to the axle, holding it from falling down before gently lowering it
2018-07-23 19:38:11 ★ onto the ground nearby.      ((Enzo Reyes))
2018-07-23 19:40:42 ★ Enzo Reyes fiddles around the transmission using only his hands to feel onto any electronic-
2018-07-23 19:40:58 ★ wiring/cables connected to the transmission.      ((Enzo Reyes))
2018-07-23 19:41:22 ★ Enzo Reyes disconnects any and every wire found, allowing the transmission to be freely pulled out-
2018-07-23 19:41:25 ★ when the time comes.      ((Enzo Reyes))
2018-07-23 19:41:50 ★ Enzo Reyes uses his air wrench once more to loosen up and remove the bolts holding up the-
2018-07-23 19:42:16 ★ metal panel underneath the clutch, creating more room for the engine removal.      ((Enzo Reyes))
2018-07-23 19:42:32 ★ Enzo Reyes steps up to the front of the vehicle and grabs his toolbox, placing up next to him onto-
2018-07-23 19:42:42 ★ the fender of the truck.      ((Enzo Reyes))
2018-07-23 19:43:00 ★ Enzo Reyes sits down on the other side, on the fender, giving him easy access to the engine.
2018-07-23 19:44:52 ★ Enzo Reyes grabs ahold of a long flathead screwdriver and forces off the rubber ring off from the-
2018-07-23 19:45:15 ★ alternator, proceeding to do the same for the ring on the water pump and lastly engine.      ((Enzo Reyes))
2018-07-23 19:45:32 ★ Enzo Reyes picks up a socket wrench with a 5/8 socket along with a wrench of the same size.
2018-07-23 19:46:05 ★ Enzo Reyes uses the tools simultanesouly to disconnect the alternator from it's pedestal.
2018-07-23 19:46:34 ★ Enzo Reyes proceeds to use a small phillips screwdriver to disconnect the electric wiring ontop -
2018-07-23 19:46:43 ★ of the alternator before competely removing it from the engine.      ((Enzo Reyes))
2018-07-23 19:47:10 ★ Enzo Reyes uses a small wrench, 7/16" in size, to completely loosen the bolts ontop of the vehicle-
2018-07-23 19:47:48 ★ air filter, slidding it off afterwards before proceeding to remove the inner filter from the      ((Enzo Reyes))
2018-07-23 19:47:58 ★ inside, throwing it away.      ((Enzo Reyes))
2018-07-23 19:48:15 ★ Enzo Reyes uses his flathead screwdriver to loosen the rubber tubes connecting the engine to the-
2018-07-23 19:48:38 ★ cooling system, radiator, he'd do so by removing the thin metal rings around each-      ((Enzo Reyes))
2018-07-23 19:48:43 ★ end of the rubber tubes.      ((Enzo Reyes))
2018-07-23 19:49:02 ★ Enzo Reyes forcefully pops off the tubes, letting any anti-freeze water drip out onto the floor.
2018-07-23 19:49:31 ★ Enzo Reyes proceeds to also loosen the two metal tubes connecting the oil to the radiator.
2018-07-23 19:49:55 ★ Enzo Reyes would do so by opening the end of the tubes with a monkey wrench of the according size-
2018-07-23 19:50:03 ★ around 15/16" to 1".      ((Enzo Reyes))
2018-07-23 19:50:26 ★ Enzo Reyes uses a flatheadscrewdriver to disconnecting the electric wiring connecting the starter-
2018-07-23 19:50:42 ★ to the engine, pulling out the plugs which don't require any tools aswell.      ((Enzo Reyes))
2018-07-23 19:51:09 ★ Enzo Reyes hops off the truck and walks towards the engine jack, bringing it closer to the vehicle-
2018-07-23 19:51:24 ★ and raising the hook whilst positioning it directly above the engine.      ((Enzo Reyes))
2018-07-23 19:51:42 ★ Enzo Reyes attaches the 3 hooks to the engine firmly locking them in place.
2018-07-23 19:52:00 ★ Enzo Reyes steps under the vehicle and reaches up with his air wrench , using a long extension -
2018-07-23 19:52:20 ★ accessory along with a 13/16" socket, proceeding to remove each of the 3 bolts on-      ((Enzo Reyes))
2018-07-23 19:52:30 ★ either side of the engine, disconnecting it from the vehicle's chassis.      ((Enzo Reyes))
2018-07-23 19:52:51 ★ Enzo Reyes moves towards the engine jack and starts to slowly pump on the level, raising the-
2018-07-23 19:53:01 ★ engine up from the vehicle's chasis.      ((Enzo Reyes))
2018-07-23 19:53:20 ★ Once reaching desired height, Enzo starts pulling on the jack, then switching -      ((Enzo Reyes))
2018-07-23 19:53:34 ★ inbetween actions, pumping the lever and pulling on the jack as needed to be safely and -      ((Enzo Reyes))
2018-07-23 19:53:46 ★ successfully remove the engine+transmission from the vehicle's chasis.      ((Enzo Reyes))
2018-07-23 19:55:23 ★ Enzo Reyes moves towards left side of the vehicle, where the front wheel would have been.
2018-07-23 19:55:46 ★ Enzo Reyes picks up a small flathead scrwedriver and pries off the slim air tube connected to the-
2018-07-23 19:55:48 ★ brake caliper.      ((Enzo Reyes))
2018-07-23 19:56:07 ★ Enzo Reyes proceeds to grab a 9/16" wrench and removes the two bolts holding the caliper's oil tube-
2018-07-23 19:56:09 ★ attached to it.      ((Enzo Reyes))
2018-07-23 19:56:28 ★ Enzo Reyes proceeds to pick up a socket wrench using a 5/8 socket, starting to remove and -
2018-07-23 19:56:48 ★ unattach the bolts connecting the brake caliper to the brake disk, completely removing-      ((Enzo Reyes))
2018-07-23 19:56:54 ★ the caliper from the vehicle afterwards and setting it aside.      ((Enzo Reyes))