API tools faq
paste
rnayak

4460 Panda Bootlog

rnayak
Jun 14th, 2012
79
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.00 KB | None | 0 0
raw download clone embed print report
  1. ## Booting kernel from Legacy Image at 80000000 ...
  2. Image Name: Linux-3.5.0-rc2-10691-gd563c0b
  3. Image Type: ARM Linux Kernel Image (uncompressed)
  4. Data Size: 3812552 Bytes = 3.6 MiB
  5. Load Address: 80008000
  6. Entry Point: 80008000
  7. Verifying Checksum ... OK
  8. Loading Kernel Image ... OK
  9. OK
  10.  
  11. Starting kernel ...
  12.  
  13. Uncompressing Linux... done, booting the kernel.
  14. [ 0.000000] Booting Linux on physical CPU 0
  15. [ 0.000000] Linux version 3.5.0-rc2-10691-gd563c0b (a0131687@ula0131687) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #1 SMP Thu Jun 14 16:49:06 IS2
  16. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
  17. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  18. [ 0.000000] Machine: OMAP4 Panda board
  19. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  20. [ 0.000000] OMAP4460 ES1.1
  21. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c14b4000 s11520 r8192 d13056 u32768
  22. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840
  23. [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait earlyprintk
  24. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  25. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  26. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  27. [ 0.000000] Memory: 759MB 264MB = 1023MB total
  28. [ 0.000000] Memory: 1025496k/1025496k available, 23080k reserved, 270336K highmem
  29. [ 0.000000] Virtual kernel memory layout:
  30. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  31. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  32. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  33. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  34. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  35. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  36. [ 0.000000] .text : 0xc0008000 - 0xc0660484 (6498 kB)
  37. [ 0.000000] .init : 0xc0661000 - 0xc06afd00 ( 316 kB)
  38. [ 0.000000] .data : 0xc06b0000 - 0xc0747d30 ( 608 kB)
  39. [ 0.000000] .bss : 0xc0747d54 - 0xc0ca0508 (5474 kB)
  40. [ 0.000000] Hierarchical RCU implementation.
  41. [ 0.000000] NR_IRQS:474
  42. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  43. [ 0.000000] omap_hwmod: counter_32k: missing clockdomain for sys_32k_ck.
  44. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  45. [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
  46. [ 0.000000] Console: colour dummy device 80x30
  47. [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  48. [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
  49. [ 0.000000] ... MAX_LOCK_DEPTH: 48
  50. [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
  51. [ 0.000000] ... CLASSHASH_SIZE: 4096
  52. [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
  53. [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
  54. [ 0.000000] ... CHAINHASH_SIZE: 16384
  55. [ 0.000000] memory used by lock dependency info: 3695 kB
  56. [ 0.000000] per task-struct memory footprint: 1152 bytes
  57. [ 0.062438] Calibrating delay loop... 1392.74 BogoMIPS (lpj=5439488)
  58. [ 0.062469] pid_max: default: 32768 minimum: 301
  59. [ 0.063079] Security Framework initialized
  60. [ 0.063293] Mount-cache hash table entries: 512
  61. [ 0.067565] CPU: Testing write buffer coherency: ok
  62. [ 0.068206] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  63. [ 0.068298] smp_twd: clock not found: -2
  64. [ 0.109313] Calibrating local timer... 341.48MHz.
  65. [ 0.109588] Setting up static identity map for 0x804a57e0 - 0x804a5850
  66. [ 0.109649] L310 cache controller enabled
  67. [ 0.109680] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1048576 B
  68. [ 0.112365] CPU1: Booted secondary processor
  69. [ 0.178161] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  70. [ 0.178222] CPU1: Unknown IPI message 0x1
  71. [ 0.178405] Brought up 2 CPUs
  72. [ 0.178436] SMP: Total of 2 processors activated (2755.07 BogoMIPS).
  73. [ 0.188995] omap_hwmod: debugss: missing clockdomain for trace_clk_div_ck.
  74. [ 0.188995] omap_hwmod: dma_system: missing clockdomain for l3_div_ck.
  75. [ 0.193756] omap_hwmod: usb_host_fs: _wait_target_disable failed
  76. [ 0.196472] omap_hwmod: aess: _wait_target_disable failed
  77. [ 0.199279] omap_hwmod: sl2if: cannot be enabled for reset (3)
  78. [ 0.203460] omap_hwmod: mcpdm: cannot be enabled for reset (3)
  79. [ 0.209045] dummy:
  80. [ 0.210418] NET: Registered protocol family 16
  81. [ 0.211120] GPMC revision 6.0
  82. [ 0.211212] gpmc: irq-52 could not claim: err -22
  83. [ 0.217803] OMAP GPIO hardware version 0.1
  84. [ 0.226348] omap_mux_init: Add partition: #1: core, flags: 2
  85. [ 0.228088] omap_mux_init: Add partition: #2: wkup, flags: 2
  86. [ 0.228271] error setting wl12xx data: -38
  87. [ 0.297851] usbhs_omap: alias fck already exists
  88. [ 0.303009] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  89. [ 0.303039] hw-breakpoint: maximum watchpoint size is 4 bytes.
  90. [ 0.313476] OMAP DMA hardware revision 0.0
  91. [ 0.351135] bio: create slab <bio-0> at 0
  92. [ 0.353149] vwl1271: 1800 mV
  93. [ 0.356475] SCSI subsystem initialized
  94. [ 0.357910] usbcore: registered new interface driver usbfs
  95. [ 0.358215] usbcore: registered new interface driver hub
  96. [ 0.358581] usbcore: registered new device driver usb
  97. [ 0.368988] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz
  98. [ 0.371826] Skipping twl internal clock init and using bootloader value (unknown osc rate)
  99. [ 0.372985] twl 1-0048: PIH (irq 39) chaining IRQs 352..372
  100. [ 0.374969] VUSB: 3300 mV normal standby
  101. [ 0.376159] vdd_mpu: 500 <--> 1500 mV normal
  102. [ 0.377319] vdd_iva: 500 <--> 1500 mV normal
  103. [ 0.378540] vdd_core: 500 <--> 1500 mV normal
  104. [ 0.379974] V1V8: 1800 mV normal standby
  105. [ 0.381134] V2V1: 2100 mV normal standby
  106. [ 0.382415] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
  107. [ 0.383880] VPP: 1800 <--> 2500 mV at 1900 mV normal standby
  108. [ 0.385742] VCXIO: 1800 mV normal standby
  109. [ 0.385833] VCXIO: supplied by V2V1
  110. [ 0.388122] VDAC: 1800 mV normal standby
  111. [ 0.388183] VDAC: supplied by V2V1
  112. [ 0.389984] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
  113. [ 0.391479] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
  114. [ 0.392822] CLK32KG:
  115. [ 0.393981] VANA: 2100 mV normal standby
  116. [ 0.406921] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz
  117. [ 0.422180] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz
  118. [ 0.437438] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz
  119. [ 0.442291] Switching to clocksource 32k_counter
  120. [ 0.510375] usbhs_omap usbhs_omap: ehci_logic_fck failed:-2
  121. [ 0.512512] NET: Registered protocol family 2
  122. [ 0.513305] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  123. [ 0.514831] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  124. [ 0.517974] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
  125. [ 0.539550] TCP: Hash tables configured (established 131072 bind 65536)
  126. [ 0.539672] TCP: reno registered
  127. [ 0.539733] UDP hash table entries: 512 (order: 3, 40960 bytes)
  128. [ 0.540100] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
  129. [ 0.540985] NET: Registered protocol family 1
  130. [ 0.542053] RPC: Registered named UNIX socket transport module.
  131. [ 0.542083] RPC: Registered udp transport module.
  132. [ 0.542083] RPC: Registered tcp transport module.
  133. [ 0.542083] RPC: Registered tcp NFSv4.1 backchannel transport module.
  134. [ 0.542694] NetWinder Floating Point Emulator V0.97 (double precision)
  135. [ 0.710327] highmem bounce pool size: 64 pages
  136. [ 0.710998] VFS: Disk quotas dquot_6.5.2
  137. [ 0.711212] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  138. [ 0.712341] NFS: Registering the id_resolver key type
  139. [ 0.712646] Key type id_resolver registered
  140. [ 0.713348] jffs2: version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc.
  141. [ 0.714141] msgmni has been set to 1474
  142. [ 0.716369] io scheduler noop registered
  143. [ 0.716369] io scheduler deadline registered
  144. [ 0.716522] io scheduler cfq registered (default)
  145. [ 0.717895] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  146. [ 0.721862] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
  147. [ 0.722991] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
  148. [ 0.723785] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
  149. [ 1.486785] console [ttyO2] enabled
  150. [ 1.491394] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
  151. [ 1.519134] brd: module loaded
  152. [ 1.534118] loop: module loaded
  153. [ 1.541229] mtdoops: mtd device (mtddev=name/number) must be supplied
  154. [ 1.548461] OneNAND driver initializing
  155. [ 1.560607] usbcore: registered new interface driver asix
  156. [ 1.566589] usbcore: registered new interface driver cdc_ether
  157. [ 1.573120] usbcore: registered new interface driver smsc95xx
  158. [ 1.579742] usbcore: registered new interface driver net1080
  159. [ 1.586029] usbcore: registered new interface driver cdc_subset
  160. [ 1.592651] usbcore: registered new interface driver zaurus
  161. [ 1.598907] usbcore: registered new interface driver cdc_ncm
  162. [ 1.605743] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  163. [ 2.614562] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  164. [ 2.622100] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
  165. [ 2.630371] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
  166. [ 2.645843] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  167. [ 2.652648] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  168. [ 2.659820] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  169. [ 2.667419] usb usb1: Product: OMAP-EHCI Host Controller
  170. [ 2.673004] usb usb1: Manufacturer: Linux 3.5.0-rc2-10691-gd563c0b ehci_hcd
  171. [ 2.680328] usb usb1: SerialNumber: ehci-omap.0
  172. [ 2.687499] hub 1-0:1.0: USB hub found
  173. [ 2.691558] hub 1-0:1.0: 3 ports detected
  174. [ 2.724456] usbcore: registered new interface driver cdc_wdm
  175. [ 2.730407] Initializing USB Mass Storage driver...
  176. [ 2.735931] usbcore: registered new interface driver usb-storage
  177. [ 2.742248] USB Mass Storage support registered.
  178. [ 2.747833] usbcore: registered new interface driver libusual
  179. [ 2.754211] usbcore: registered new interface driver usbtest
  180. [ 2.761108] mousedev: PS/2 mouse device common for all mice
  181. [ 2.769866] twl_rtc twl_rtc: Power up reset detected.
  182. [ 2.776031] twl_rtc twl_rtc: Enabling TWL-RTC
  183. [ 2.784088] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  184. [ 2.790618] genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq 363
  185. [ 2.799499] twl_rtc twl_rtc: IRQ is not free.
  186. [ 2.806518] twl_rtc: probe of twl_rtc failed with error -22
  187. [ 2.812713] i2c /dev entries driver
  188. [ 2.818908] Driver for 1-wire Dallas network protocol.
  189. [ 2.826568] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  190. [ 2.836029] omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
  191. [ 2.888244] omap_hsmmc omap_hsmmc.4: Failed to get debounce clk
  192. [ 3.010040] usbcore: registered new interface driver usbhid
  193. [ 3.015960] usbhid: USB HID core driver
  194. [ 3.019989] oprofile: hardware counters not available
  195. [ 3.025299] oprofile: using timer interrupt.
  196. [ 3.030334] TCP: cubic registered
  197. [ 3.033813] Initializing XFRM netlink socket
  198. [ 3.038604] NET: Registered protocol family 17
  199. [ 3.043334] NET: Registered protocol family 15
  200. [ 3.048278] Key type dns_resolver registered
  201. [ 3.052886] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  202. [ 3.067108] omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0).
  203. [ 3.075653] mmc1: card claims to support voltages below the defined range. These will be ignored.
  204. [ 3.076538] omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0).
  205. [ 3.076538] Power Management for TI OMAP4.
  206. [ 3.076690] ThumbEE CPU extension supported.
  207. [ 3.104583] VANA: incomplete constraints, leaving on
  208. [ 3.110260] CLK32KG: incomplete constraints, leaving on
  209. [ 3.116912] VDAC: incomplete constraints, leaving on
  210. [ 3.122955] VUSB: incomplete constraints, leaving on
  211. [ 3.129119] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  212. [ 3.138916] Waiting for root device /dev/mmcblk0p2...
  213. [ 3.148193] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
  214. [ 3.155609] mmc1: new SDIO card at address 0001
  215. [ 3.318084] mmc0: host does not support reading read-only switch. assuming write-enable.
  216. [ 3.328613] mmc0: new high speed SD card at address e624
  217. [ 3.335601] mmcblk0: mmc0:e624 SD02G 1.89 GiB
  218. [ 3.343597] mmcblk0: p1 p2
  219. [ 3.362731] kjournald starting. Commit interval 5 seconds
  220. [ 3.362945] EXT3-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
  221. [ 3.366241] EXT3-fs (mmcblk0p2): using internal journal
  222. [ 3.366241] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
  223. [ 3.366546] VFS: Mounted root (ext3 filesystem) on device 179:2.
  224. [ 3.366882] Freeing init memory: 312K
  225. Mounting proc : OK
  226. Mounting sysfs : OK
  227. Mounting /dev : OK
  228. Creating local mdev devices
  229. sh: /etc/mdev/mmc.sh: not found
  230. mkdir: can't create directory '/dev/input': File exists
  231.  
  232. ******************************************
  233. Starting System Init for 3430SDP-3430
  234. Release: X.x
  235. Kernel: Linux 3430SDP-3430 3.5.0-rc2-10691-gd563c0b #1 SMP Thu Jun 14 16:49:06 IST 2012 armv7l GNU/Linux
  236. ******************************************
  237. Saving kernel ring buffer : OK
  238. Mounting devpts : OK
  239. Setting up networking
  240. Configuring lo : OK
  241. Configuring eth0 : ifconfig: eth0: error fetching interface information: Device not found
  242. ifup: can't open '/etc/network/interfaces': No such file or directory
  243. Failed
  244. Starting syslogd : OK
  245. Starting klogd : OK
  246. Mounting filesystems : OK
  247. mount: mounting none on /proc/bus/usb/ failed: No such file or directory
  248.  
  249. Please press Enter to activate this console.
  250. #
  251. #
  252. #
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!