Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000 / 01-01 00:00:00.000][0] Initializing cgroup subsys cpu
- <6>[ 0.000000 / 01-01 00:00:00.000][0] Initializing cgroup subsys cpuacct
- <5>[ 0.000000 / 01-01 00:00:00.000][0] Linux version 3.10.49-gf53c0f6 (<email omitted>) (gcc version 4.9.x-google 20140827 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 1 11:08:54 CET 2016
- <4>[ 0.000000 / 01-01 00:00:00.000][0] CPU: AArch64 Processor [410fd033] revision 3
- <6>[ 0.000000 / 01-01 00:00:00.000][0] Machine: Qualcomm Technologies, Inc. MSM8992 PPLUS TMO US
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: Found secure_region@0, memory base 0x0000000000000000, size 300 MiB, limit 0xffffffffffffffff
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: Found qsecom_region@0, memory base 0x0000000000000000, size 24 MiB, limit 0xffffffffffffffff
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: Found audio_region@0, memory base 0x0000000000000000, size 4 MiB, limit 0xffffffffffffffff
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: Found removed_regions@0, memory base 0x0000000005a00000, size 24 MiB, limit 0xffffffffffffffff
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: Found cont_splash_mem@0, memory base 0x0000000003400000, size 12 MiB, limit 0xffffffffffffffff
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: Found peripheral_region@0, memory base 0x0000000007400000, size 28 MiB, limit 0xffffffffffffffff
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: Found modem_region@0, memory base 0x0000000009000000, size 100 MiB, limit 0xffffffffffffffff
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: Found ramoops_region@0ff00000, memory base 0x000000000ff00000, size 1 MiB, limit 0xffffffffffffffff
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: Found crash_fb_mem@4000000, memory base 0x0000000004000000, size 12 MiB, limit 0xffffffffffffffff
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: CMA: reserved 300 MiB at 0x00000000e5400000 for secure_mem
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: CMA: reserved 24 MiB at 0x00000000e3c00000 for qseecom_mem
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: CMA: reserved 4 MiB at 0x00000000e3800000 for audio_mem
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: CMA: reserved 24 MiB at 0x0000000005a00000 for memory_hole
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: CMA: reserved 12 MiB at 0x0000000003400000 for cont_splash_mem
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: CMA: reserved 28 MiB at 0x0000000007400000 for peripheral_mem
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: CMA: reserved 100 MiB at 0x0000000009000000 for modem_mem
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: CMA: reserved 1 MiB at 0x000000000ff00000 for ramoops_mem
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: CMA: reserved 12 MiB at 0x0000000004000000 for crash_fb_mem
- <6>[ 0.000000 / 01-01 00:00:00.000][0] cma: CMA: reserved 16 MiB at 0x00000000e2800000 for default region
- <7>[ 0.000000 / 01-01 00:00:00.000][0] On node 0 totalpages: 976640
- <7>[ 0.000000 / 01-01 00:00:00.000][0] DMA zone: 13888 pages used for memmap
- <7>[ 0.000000 / 01-01 00:00:00.000][0] DMA zone: 0 pages reserved
- <7>[ 0.000000 / 01-01 00:00:00.000][0] DMA zone: 976640 pages, LIFO batch:31
- <6>[ 0.000000 / 01-01 00:00:00.000][0] PERCPU: Embedded 17 pages/cpu @ffffffc0e2601000 s39104 r8192 d22336 u69632
- <7>[ 0.000000 / 01-01 00:00:00.000][0] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096
- <7>[ 0.000000 / 01-01 00:00:00.000][0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
- <4>[ 0.000000 / 01-01 00:00:00.000][0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 962752
- <5>[ 0.000000 / 01-01 00:00:00.000][0] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 boot_cpus=0-5 lge.rev=rev_10 lge.battid=SW3800_VC0 lge.bootreason=Reboot_by_PowerKey maxcpus boot_cpus=0-5 kswitch cc_mode=0 lge.device_color=BK androidboot.bl_unlock_complete=true androidboot.dlcomplete=0 gpt model.name=LG-H901 bootcable.type=400MA androidboot.ddr_size=4160749568 androidboot.ddr_info=0x1f000306 fakebattery=disable lge.bootreasoncode=0x77665501 lge.hreset=off lge.dic_rev=3 fips_allow_others=1 fips_panic=0 fips=0 androidboot.bootdevice=f9824900.sdhci androidboot.serialno=<private info omitted> lge.signed_image=false lge.dsv_id=DW androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_lgd_lg4945_1440p_mipi0_cmd:1:qcom,mdss_dsi_lgd_lg4945_1440p_mipi1_cmd
- <6>[ 0.000000 / 01-01 00:00:00.000][0] BOARD : LGE rev_10
- <6>[ 0.000000 / 01-01 00:00:00.000][0] CCMODE: CC mode disabled
- <6>[ 0.000000 / 01-01 00:00:00.000][0] androidboot.dlcomplete = 0
- <6>[ 0.000000 / 01-01 00:00:00.000][0] LGE REBOOT REASON: 77665501
- <6>[ 0.000000 / 01-01 00:00:00.000][0] lge_lgd_sic4945_rev is 3
- <6>[ 0.000000 / 01-01 00:00:00.000][0] FIPS: non-FIPS algorithms in FIPS mode allowed
- <6>[ 0.000000 / 01-01 00:00:00.000][0] FIPS: panic on test fail disabled
- <6>[ 0.000000 / 01-01 00:00:00.000][0] FIPS: FIPS capability disabled
- <6>[ 0.000000 / 01-01 00:00:00.000][0] dsv vendor id is DW
- <6>[ 0.000000 / 01-01 00:00:00.000][0] PID hash table entries: 4096 (order: 3, 32768 bytes)
- <6>[ 0.000000 / 01-01 00:00:00.000][0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- <6>[ 0.000000 / 01-01 00:00:00.000][0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- <6>[ 0.000000 / 01-01 00:00:00.000][0] software IO TLB [mem 0xde6f8000-0xde7f8000] (1MB) mapped at [ffffffc0de6f8000-ffffffc0de7f7fff]
- <4>[ 0.000000 / 01-01 00:00:00.000][0] Memory: 3434332K/3906560K available (12319K kernel code, 905K rwdata, 5736K rodata, 2134K init, 2535K bss, 472228K reserved)
- <5>[ 0.000000 / 01-01 00:00:00.000][0] Virtual kernel memory layout:
- <5>[ 0.000000 / 01-01 00:00:00.000][0] vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
- <5>[ 0.000000 / 01-01 00:00:00.000][0] vmemmap : 0xffffffbc00000000 - 0xffffffbc03640000 ( 54 MB)
- <5>[ 0.000000 / 01-01 00:00:00.000][0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
- <5>[ 0.000000 / 01-01 00:00:00.000][0] memory : 0xffffffc000000000 - 0xffffffc0f8000000 ( 3968 MB)
- <5>[ 0.000000 / 01-01 00:00:00.000][0] .init : 0xffffffc001400000 - 0xffffffc0016158c0 ( 2135 kB)
- <5>[ 0.000000 / 01-01 00:00:00.000][0] .text : 0xffffffc000080000 - 0xffffffc0013a1c74 ( 19592 kB)
- <5>[ 0.000000 / 01-01 00:00:00.000][0] .data : 0xffffffc001616000 - 0xffffffc0016f84c0 ( 906 kB)
- <6>[ 0.000000 / 01-01 00:00:00.000][0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- <6>[ 0.000000 / 01-01 00:00:00.000][0] HMP scheduling enabled.
- <6>[ 0.000000 / 01-01 00:00:00.000][0] Preemptible hierarchical RCU implementation.
- <6>[ 0.000000 / 01-01 00:00:00.000][0] RCU dyntick-idle grace-period acceleration is enabled.
- <6>[ 0.000000 / 01-01 00:00:00.000][0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
- <6>[ 0.000000 / 01-01 00:00:00.000][0] NR_IRQS:64 nr_irqs:64 0
- <6>[ 0.000000 / 01-01 00:00:00.000][0] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
- <6>[ 0.000000 / 01-01 00:00:00.000][0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
- <6>[ 0.001471 / 01-01 00:00:00.000][0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- <6>[ 0.001494 / 01-01 00:00:00.000][0] pid_max: default: 32768 minimum: 301
- <6>[ 0.002914 / 01-01 00:00:00.000][0] Security Framework initialized
- <6>[ 0.002963 / 01-01 00:00:00.000][0] SELinux: Initializing.
- <7>[ 0.003012 / 01-01 00:00:00.000][0] SELinux: Starting in permissive mode
- <6>[ 0.003104 / 01-01 00:00:00.000][0] Mount-cache hash table entries: 256
- <6>[ 0.004220 / 01-01 00:00:00.000][0] Initializing cgroup subsys freezer
- <3>[ 0.004663 / 01-01 00:00:00.000][0] /cpus/cpu@0: Missing clock-frequency property
- <3>[ 0.004684 / 01-01 00:00:00.000][0] /cpus/cpu@1: Missing clock-frequency property
- <3>[ 0.004704 / 01-01 00:00:00.000][0] /cpus/cpu@2: Missing clock-frequency property
- <3>[ 0.004724 / 01-01 00:00:00.000][0] /cpus/cpu@3: Missing clock-frequency property
- <3>[ 0.004745 / 01-01 00:00:00.000][0] /cpus/cpu@100: Missing clock-frequency property
- <3>[ 0.004766 / 01-01 00:00:00.000][0] /cpus/cpu@101: Missing clock-frequency property
- <6>[ 0.010775 / 01-01 00:00:00.010][0] ftrace: Allocated trace_printk buffers
- <6>[ 0.018961 / 01-01 00:00:00.010][0] MSM Memory Dump base table set up
- <6>[ 0.019005 / 01-01 00:00:00.010][0] MSM Memory Dump apps data table set up
- <6>[ 0.020073 / 01-01 00:00:00.020][0] panic-handler: reserved[@0x4000000+@0xc00000)
- <6>[ 0.021214 / 01-01 00:00:00.020][0] msm8992: configuring clocks for the A57 cluster
- <4>[ 0.021273 / 01-01 00:00:00.020][0] msm8992: finished configuring A57 cluster clocks.
- <5>[ 0.030158 / 01-01 00:00:00.030][1] CPU1: Booted secondary processor
- <5>[ 0.040183 / 01-01 00:00:00.040][2] CPU2: Booted secondary processor
- <5>[ 0.050216 / 01-01 00:00:00.050][3] CPU3: Booted secondary processor
- <5>[ 0.060253 / 01-01 00:00:00.060][4] CPU4: Booted secondary processor
- <5>[ 0.070284 / 01-01 00:00:00.070][5] CPU5: Booted secondary processor
- <6>[ 0.070514 / 01-01 00:00:00.070][0] Brought up 6 CPUs
- <6>[ 0.070612 / 01-01 00:00:00.070][0] SMP: Total of 6 processors activated.
- <6>[ 0.097800 / 01-01 00:00:00.090][0] pinctrl core: initialized pinctrl subsystem
- <6>[ 0.098248 / 01-01 00:00:00.090][0] regulator-dummy: no parameters
- <6>[ 0.113905 / 01-01 00:00:00.110][0] NET: Registered protocol family 16
- <6>[ 0.118127 / 01-01 00:00:00.110][1] DMA: preallocated 256 KiB pool for atomic allocations
- <6>[ 0.178949 / 01-01 00:00:00.170][1] msm_watchdog f9017000.qcom,wdt: wdog absent resource not present
- <6>[ 0.179267 / 01-01 00:00:00.170][1] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
- <3>[ 0.182545 / 01-01 00:00:00.180][1] spmi_pmic_arb fc4cf000.qcom,spmi: PMIC Arb Version-1 0x20000002
- <6>[ 0.194228 / 01-01 00:00:00.190][1] cma: Assigned CMA region at 0 to 0.qcom,dsp_sharedmem device
- <6>[ 0.194532 / 01-01 00:00:00.190][1] cma: Assigned CMA region at 0 to 0.qcom,sensors_sharedmem device
- <6>[ 0.194735 / 01-01 00:00:00.190][1] cma: Assigned CMA region at 0 to fdce0000.qcom,venus device
- <6>[ 0.195039 / 01-01 00:00:00.190][1] cma: Assigned CMA region at 0 to fc880000.qcom,mss device
- <6>[ 0.195296 / 01-01 00:00:00.190][1] cma: Assigned CMA region at 0 to fe200000.qcom,lpass device
- <6>[ 0.198636 / 01-01 00:00:00.190][1] cma: Assigned CMA region at 0 to audio_heap.67 device
- <6>[ 0.198811 / 01-01 00:00:00.190][1] cma: Assigned CMA region at 0 to adsp_heap.68 device
- <6>[ 0.231509 / 01-01 00:00:00.230][1] console [pstore-1] enabled
- <6>[ 0.231535 / 01-01 00:00:00.230][1] ramoops: attached 0x80000@0xff00000, ecc: 0/0
- <6>[ 0.233453 / 01-01 00:00:00.230][1] vdso: 2 pages (1 code, 1 data) at base ffffffc00161d000
- <3>[ 0.234101 / 01-01 00:00:00.230][1] msm_mpm_dev_probe(): Cannot get clk resource for XO
- <6>[ 0.234143 / 01-01 00:00:00.230][1] platform fc4281d0.qcom,mpm: Driver mpm-v2 requests probe deferral
- <6>[ 0.234755 / 01-01 00:00:00.230][1] smd_open() before smd_init()
- <6>[ 0.234790 / 01-01 00:00:00.230][1] platform qcom,rpm-smd.63: Driver rpm-smd requests probe deferral
- <3>[ 0.238184 / 01-01 00:00:00.230][2] smd_channel_probe_now: allocation table not initialized
- <3>[ 0.239048 / 01-01 00:00:00.230][2] smd_channel_probe_now: allocation table not initialized
- <6>[ 0.244539 / 01-01 00:00:00.240][2] pm8994_s8: 700 <--> 1180 mV at 1000 mV
- <6>[ 0.244706 / 01-01 00:00:00.240][2] spm_regulator_probe: name=pm8994_s8, range=LV, voltage=1000000 uV, mode=AUTO, step rate=2400 uV/us
- <6>[ 0.244914 / 01-01 00:00:00.240][2] pm8994_s11: 700 <--> 1225 mV at 1000 mV
- <6>[ 0.245057 / 01-01 00:00:00.240][2] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=1000000 uV, mode=AUTO, step rate=2400 uV/us
- <6>[ 0.245520 / 01-01 00:00:00.240][2] cpr_efuse_init: apc0_corner: efuse_addr = 0x00000000fc4bc000 (len=0x1000)
- <6>[ 0.245606 / 01-01 00:00:00.240][2] cpr_fuse_is_setting_expected: apc0_corner: [row:62] = 0x1e009b2160 @48:3 == 1 ?: no
- <6>[ 0.245645 / 01-01 00:00:00.240][2] cpr_read_fuse_revision: apc0_corner: fuse revision = 4
- <6>[ 0.245678 / 01-01 00:00:00.240][2] cpr_parse_speed_bin_fuse: apc0_corner: [row: 22]: 0x94800209844e6a0, speed_bits = 1
- <6>[ 0.245847 / 01-01 00:00:00.240][2] cpr_adjust_init_voltages: apc0_corner: adjusted initial voltage[2]: 870000 -> 855000 uV
- <6>[ 0.245878 / 01-01 00:00:00.240][2] cpr_adjust_init_voltages: apc0_corner: adjusted initial voltage[3]: 930000 -> 905000 uV
- <6>[ 0.245916 / 01-01 00:00:00.240][2] cpr_pvs_init: apc0_corner: pvs voltage: [870000 855000 905000 1090000] uV
- <6>[ 0.245944 / 01-01 00:00:00.240][2] cpr_pvs_init: apc0_corner: ceiling voltage: [900000 900000 1000000 1180000] uV
- <6>[ 0.245971 / 01-01 00:00:00.240][2] cpr_pvs_init: apc0_corner: floor voltage: [640000 700000 800000 850000] uV
- <6>[ 0.246332 / 01-01 00:00:00.240][2] platform f9019000.regulator: Driver qcom,cpr-regulator requests probe deferral
- <6>[ 0.246436 / 01-01 00:00:00.240][2] cpr_efuse_init: apc1_corner: efuse_addr = 0x00000000fc4bc000 (len=0x1000)
- <6>[ 0.246515 / 01-01 00:00:00.240][2] cpr_fuse_is_setting_expected: apc1_corner: [row:62] = 0x1e009b2160 @48:3 == 1 ?: no
- <6>[ 0.246551 / 01-01 00:00:00.240][2] cpr_read_fuse_revision: apc1_corner: fuse revision = 4
- <6>[ 0.246583 / 01-01 00:00:00.240][2] cpr_parse_speed_bin_fuse: apc1_corner: [row: 22]: 0x94800209844e6a0, speed_bits = 0
- <6>[ 0.246732 / 01-01 00:00:00.240][2] cpr_adjust_init_voltages: apc1_corner: adjusted initial voltage[1]: 850000 -> 880000 uV
- <6>[ 0.246763 / 01-01 00:00:00.240][2] cpr_adjust_init_voltages: apc1_corner: adjusted initial voltage[2]: 850000 -> 880000 uV
- <6>[ 0.246793 / 01-01 00:00:00.240][2] cpr_adjust_init_voltages: apc1_corner: adjusted initial voltage[3]: 930000 -> 910000 uV
- <6>[ 0.246824 / 01-01 00:00:00.240][2] cpr_adjust_init_voltages: apc1_corner: adjusted initial voltage[4]: 1090000 -> 1070000 uV
- <6>[ 0.246853 / 01-01 00:00:00.240][2] cpr_pvs_init: apc1_corner: pvs voltage: [880000 880000 910000 1070000] uV
- <6>[ 0.246880 / 01-01 00:00:00.240][2] cpr_pvs_init: apc1_corner: ceiling voltage: [900000 900000 1000000 1180000] uV
- <6>[ 0.246907 / 01-01 00:00:00.240][2] cpr_pvs_init: apc1_corner: floor voltage: [640000 640000 745000 850000] uV
- <6>[ 0.247098 / 01-01 00:00:00.240][2] platform f901a000.regulator: Driver qcom,cpr-regulator requests probe deferral
- <6>[ 0.248117 / 01-01 00:00:00.240][2] i2c-msm-v2 f9924000.i2c: probing driver i2c-msm-v2
- <3>[ 0.248231 / 01-01 00:00:00.240][2] i2c-msm-v2 f9924000.i2c: error on clk_get(core_clk):-517
- <3>[ 0.248260 / 01-01 00:00:00.240][2] i2c-msm-v2 f9924000.i2c: error probe() failed with err:-517
- <6>[ 0.248301 / 01-01 00:00:00.240][2] platform f9924000.i2c: Driver i2c-msm-v2 requests probe deferral
- <6>[ 0.248673 / 01-01 00:00:00.240][2] i2c-msm-v2 f9967000.i2c: probing driver i2c-msm-v2
- <3>[ 0.248768 / 01-01 00:00:00.240][2] i2c-msm-v2 f9967000.i2c: error on clk_get(core_clk):-517
- <3>[ 0.248795 / 01-01 00:00:00.240][2] i2c-msm-v2 f9967000.i2c: error probe() failed with err:-517
- <6>[ 0.248833 / 01-01 00:00:00.240][2] platform f9967000.i2c: Driver i2c-msm-v2 requests probe deferral
- <6>[ 0.249149 / 01-01 00:00:00.240][2] i2c-msm-v2 f9928000.i2c: probing driver i2c-msm-v2
- <3>[ 0.249242 / 01-01 00:00:00.240][2] i2c-msm-v2 f9928000.i2c: error on clk_get(core_clk):-517
- <3>[ 0.249270 / 01-01 00:00:00.240][2] i2c-msm-v2 f9928000.i2c: error probe() failed with err:-517
- <6>[ 0.249305 / 01-01 00:00:00.240][2] platform f9928000.i2c: Driver i2c-msm-v2 requests probe deferral
- <6>[ 0.250012 / 01-01 00:00:00.240][2] i2c-msm-v2 f9923000.i2c: probing driver i2c-msm-v2
- <3>[ 0.250103 / 01-01 00:00:00.240][2] i2c-msm-v2 f9923000.i2c: error on clk_get(core_clk):-517
- <3>[ 0.250131 / 01-01 00:00:00.240][2] i2c-msm-v2 f9923000.i2c: error probe() failed with err:-517
- <6>[ 0.250167 / 01-01 00:00:00.240][2] platform f9923000.i2c: Driver i2c-msm-v2 requests probe deferral
- <6>[ 0.253575 / 01-01 00:00:00.250][2] msm-thermal qcom,msm-thermal.65: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- <6>[ 0.253714 / 01-01 00:00:00.250][2] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
- <3>[ 0.253739 / 01-01 00:00:00.250][2] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
- <6>[ 0.253767 / 01-01 00:00:00.250][2] msm-thermal qcom,msm-thermal.65: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,freq-req. err=-517. KTM continues
- <3>[ 0.253794 / 01-01 00:00:00.250][2] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,freq-control-mask. err:-517
- <6>[ 0.253831 / 01-01 00:00:00.250][2] platform qcom,msm-thermal.65: Driver msm-thermal requests probe deferral
- <6>[ 0.254507 / 01-01 00:00:00.250][2] sps:sps is ready.
- <6>[ 0.257278 / 01-01 00:00:00.250][2] platform f9015000.qcom,cpu-clock-8992: Driver cpu-clock-8994 requests probe deferral
- <6>[ 0.257973 / 01-01 00:00:00.250][2] platform fc401880.qcom,rpmcc: Driver qcom,rpmcc-8992 requests probe deferral
- <6>[ 0.258519 / 01-01 00:00:00.250][2] platform fc400000.qcom,gcc: Driver qcom,gcc-8992 requests probe deferral
- <6>[ 0.259094 / 01-01 00:00:00.250][2] platform fd8c0000.qcom,mmsscc: Driver qcom,mmsscc-8992 requests probe deferral
- <3>[ 0.261068 / 01-01 00:00:00.260][0] msm_mpm_dev_probe(): Cannot get clk resource for XO
- <6>[ 0.261123 / 01-01 00:00:00.260][0] platform fc4281d0.qcom,mpm: Driver mpm-v2 requests probe deferral
- <6>[ 0.262211 / 01-01 00:00:00.260][0] pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.262727 / 01-01 00:00:00.260][0] pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.263439 / 01-01 00:00:00.260][0] pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.264161 / 01-01 00:00:00.260][0] pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.264554 / 01-01 00:00:00.260][0] pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.265110 / 01-01 00:00:00.260][0] pm8994_s3: 1300 mV normal idle
- <6>[ 0.265623 / 01-01 00:00:00.260][0] pm8994_s4: 1800 mV normal idle
- <6>[ 0.266176 / 01-01 00:00:00.260][0] pm8994_s5: 2150 mV normal idle
- <6>[ 0.266696 / 01-01 00:00:00.260][0] pm8994_s7: 1000 mV normal idle
- <6>[ 0.267216 / 01-01 00:00:00.260][0] pm8994_l1: 1000 mV normal idle
- <6>[ 0.267774 / 01-01 00:00:00.260][0] pm8994_l2: 1250 mV normal idle
- <6>[ 0.268761 / 01-01 00:00:00.260][0] pm8994_l3: 1050 mV normal idle
- <6>[ 0.269274 / 01-01 00:00:00.260][0] pm8994_l4: 1225 mV normal idle
- <6>[ 0.269819 / 01-01 00:00:00.260][0] pm8994_l6: 1800 mV normal idle
- <6>[ 0.270365 / 01-01 00:00:00.260][0] pm8994_l8: 1800 mV normal idle
- <6>[ 0.270967 / 01-01 00:00:00.270][0] pm8994_l9: 1800 mV normal idle
- <6>[ 0.271518 / 01-01 00:00:00.270][0] pm8994_l10: 1800 mV normal idle
- <6>[ 0.272028 / 01-01 00:00:00.270][0] pm8994_l11: 1200 mV normal idle
- <6>[ 0.272595 / 01-01 00:00:00.270][0] pm8994_l12: 1800 mV normal idle
- <6>[ 0.273605 / 01-01 00:00:00.270][0] pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle
- <6>[ 0.274162 / 01-01 00:00:00.270][0] pm8994_l14: 1200 mV normal idle
- <6>[ 0.275174 / 01-01 00:00:00.270][0] pm8994_l15: 1800 mV normal idle
- <6>[ 0.275716 / 01-01 00:00:00.270][0] pm8994_l16: 2700 mV normal idle
- <6>[ 0.276229 / 01-01 00:00:00.270][0] pm8994_l17: 2800 mV normal idle
- <6>[ 0.276795 / 01-01 00:00:00.270][0] pm8994_l18: 2850 mV normal idle
- <6>[ 0.277757 / 01-01 00:00:00.270][0] pm8994_l19: 3300 mV normal idle
- <6>[ 0.278318 / 01-01 00:00:00.270][0] pm8994_l20: 2950 mV normal idle
- <6>[ 0.278835 / 01-01 00:00:00.270][0] pm8994_l21: 2950 mV normal idle
- <6>[ 0.279381 / 01-01 00:00:00.270][0] pm8994_l22: 3000 <--> 3300 mV at 3000 mV normal idle
- <6>[ 0.279909 / 01-01 00:00:00.270][0] pm8994_l23: 2800 mV normal idle
- <6>[ 0.280460 / 01-01 00:00:00.270][0] pm8994_l24: 3075 <--> 3150 mV at 3075 mV normal idle
- <6>[ 0.281038 / 01-01 00:00:00.280][0] pm8994_l25: 1000 mV normal idle
- <6>[ 0.281591 / 01-01 00:00:00.280][0] pm8994_l26: 987 mV normal idle
- <6>[ 0.282098 / 01-01 00:00:00.280][0] pm8994_l27: 1000 mV normal idle
- <6>[ 0.282675 / 01-01 00:00:00.280][0] pm8994_l28: 1000 mV normal idle
- <6>[ 0.283680 / 01-01 00:00:00.280][0] pm8994_l29: 2800 mV normal idle
- <6>[ 0.284230 / 01-01 00:00:00.280][0] pm8994_l30: 1800 mV normal idle
- <6>[ 0.284896 / 01-01 00:00:00.280][0] pm8994_l32: 1800 mV normal idle
- <6>[ 0.285431 / 01-01 00:00:00.280][0] pm8994_lvs1: no parameters
- <6>[ 0.285926 / 01-01 00:00:00.280][0] pm8994_lvs2: no parameters
- <6>[ 0.286405 / 01-01 00:00:00.280][0] pmi8994_s1: 1025 mV normal idle
- <6>[ 0.286963 / 01-01 00:00:00.280][0] pmi8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.287356 / 01-01 00:00:00.280][0] pmi8994_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.287887 / 01-01 00:00:00.280][0] pmi8994_boost_5v: no parameters
- <6>[ 0.288229 / 01-01 00:00:00.280][0] pmi8994_boost_pin_ctrl: no parameters
- <6>[ 0.288724 / 01-01 00:00:00.280][0] pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
- <6>[ 0.289033 / 01-01 00:00:00.280][0] cpr_efuse_init: apc0_corner: efuse_addr = 0x00000000fc4bc000 (len=0x1000)
- <6>[ 0.289137 / 01-01 00:00:00.280][0] cpr_fuse_is_setting_expected: apc0_corner: [row:62] = 0x1e009b2160 @48:3 == 1 ?: no
- <6>[ 0.289176 / 01-01 00:00:00.280][0] cpr_read_fuse_revision: apc0_corner: fuse revision = 4
- <6>[ 0.289209 / 01-01 00:00:00.280][0] cpr_parse_speed_bin_fuse: apc0_corner: [row: 22]: 0x94800209844e6a0, speed_bits = 1
- <6>[ 0.289378 / 01-01 00:00:00.280][0] cpr_adjust_init_voltages: apc0_corner: adjusted initial voltage[2]: 870000 -> 855000 uV
- <6>[ 0.289409 / 01-01 00:00:00.280][0] cpr_adjust_init_voltages: apc0_corner: adjusted initial voltage[3]: 930000 -> 905000 uV
- <6>[ 0.289446 / 01-01 00:00:00.280][0] cpr_pvs_init: apc0_corner: pvs voltage: [870000 855000 905000 1090000] uV
- <6>[ 0.289474 / 01-01 00:00:00.280][0] cpr_pvs_init: apc0_corner: ceiling voltage: [900000 900000 1000000 1180000] uV
- <6>[ 0.289501 / 01-01 00:00:00.280][0] cpr_pvs_init: apc0_corner: floor voltage: [640000 700000 800000 850000] uV
- <6>[ 0.289902 / 01-01 00:00:00.280][0] cpr_init_cpr_efuse: apc0_corner: [row:138] = 0x74ca52d6adad5a5
- <6>[ 0.289950 / 01-01 00:00:00.280][0] cpr_init_cpr_efuse: apc0_corner: Corner[1]: ro_sel = 0, target quot = 390
- <6>[ 0.289978 / 01-01 00:00:00.280][0] cpr_init_cpr_efuse: apc0_corner: Corner[2]: ro_sel = 0, target quot = 460
- <6>[ 0.290009 / 01-01 00:00:00.280][0] cpr_init_cpr_efuse: apc0_corner: Corner[3]: ro_sel = 0, target quot = 580
- <6>[ 0.290035 / 01-01 00:00:00.280][0] cpr_init_cpr_efuse: apc0_corner: Corner[4]: ro_sel = 0, target quot = 870
- <6>[ 0.290071 / 01-01 00:00:00.280][0] cpr_adjust_target_quots: apc0_corner: Corner[1]: adjusted target quot = 320
- <6>[ 0.290100 / 01-01 00:00:00.280][0] cpr_adjust_target_quots: apc0_corner: Corner[2]: adjusted target quot = 360
- <6>[ 0.290128 / 01-01 00:00:00.280][0] cpr_adjust_target_quots: apc0_corner: Corner[3]: adjusted target quot = 480
- <6>[ 0.290226 / 01-01 00:00:00.280][0] cpr_adjust_target_quot_offsets: apc0_corner: Corner[2]: adjusted target quot = 40
- <6>[ 0.290260 / 01-01 00:00:00.280][0] cpr_adjust_target_quot_offsets: apc0_corner: Corner[4]: adjusted target quot = 390
- <6>[ 0.290355 / 01-01 00:00:00.280][0] cpr_get_corner_quot_adjustment: apc0_corner: fuse corner 2 quotient adjustment scaling factor: 0.185
- <6>[ 0.290379 / 01-01 00:00:00.280][0] cpr_get_corner_quot_adjustment: apc0_corner: fuse corner 3 quotient adjustment scaling factor: 0.641
- <6>[ 0.290403 / 01-01 00:00:00.280][0] cpr_get_corner_quot_adjustment: apc0_corner: fuse corner 4 quotient adjustment scaling factor: 0.597
- <6>[ 0.290434 / 01-01 00:00:00.280][0] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[1] = 320
- <6>[ 0.290456 / 01-01 00:00:00.280][0] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[2] = 320
- <6>[ 0.290479 / 01-01 00:00:00.280][0] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[3] = 335
- <6>[ 0.290501 / 01-01 00:00:00.280][0] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[4] = 360
- <6>[ 0.290523 / 01-01 00:00:00.280][0] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[5] = 407
- <6>[ 0.290545 / 01-01 00:00:00.280][0] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[6] = 480
- <6>[ 0.290568 / 01-01 00:00:00.280][0] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[7] = 527
- <6>[ 0.290589 / 01-01 00:00:00.280][0] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[8] = 584
- <6>[ 0.290612 / 01-01 00:00:00.280][0] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[9] = 756
- <6>[ 0.290634 / 01-01 00:00:00.280][0] cpr_get_corner_quot_adjustment: apc0_corner: adjusted quotient[10] = 870
- <6>[ 0.290767 / 01-01 00:00:00.290][0] cpr_check_allowed: apc0_corner: CPR closed loop is enabled for fuse revision 4
- <6>[ 0.290833 / 01-01 00:00:00.290][0] cpr_fill_override_voltage: apc0_corner: ceiling override voltage: [800000 800000 900000 900000 1000000 1000000 1115000 1115000 1180000 1180000] uV
- <6>[ 0.290881 / 01-01 00:00:00.290][0] cpr_fill_override_voltage: apc0_corner: floor override voltage: [640000 655000 700000 735000 800000 835000 850000 875000 950000 1000000] uV
- <6>[ 0.290990 / 01-01 00:00:00.290][0] cpr_init_cpr_parameters: apc0_corner: up threshold = 2, down threshold = 4
- <6>[ 0.291039 / 01-01 00:00:00.290][0] cpr_init_cpr_parameters: apc0_corner: CPR is enabled by default.
- <6>[ 0.291075 / 01-01 00:00:00.290][0] cpr_config: apc0_corner: Timer count: 0x17700 (for 5000 us)
- <6>[ 0.291413 / 01-01 00:00:00.290][0] apc0_corner: 0 <--> 0 mV
- <6>[ 0.291797 / 01-01 00:00:00.290][0] cpr_efuse_init: apc1_corner: efuse_addr = 0x00000000fc4bc000 (len=0x1000)
- <6>[ 0.291883 / 01-01 00:00:00.290][0] cpr_fuse_is_setting_expected: apc1_corner: [row:62] = 0x1e009b2160 @48:3 == 1 ?: no
- <6>[ 0.291921 / 01-01 00:00:00.290][0] cpr_read_fuse_revision: apc1_corner: fuse revision = 4
- <6>[ 0.291953 / 01-01 00:00:00.290][0] cpr_parse_speed_bin_fuse: apc1_corner: [row: 22]: 0x94800209844e6a0, speed_bits = 0
- <6>[ 0.292108 / 01-01 00:00:00.290][0] cpr_adjust_init_voltages: apc1_corner: adjusted initial voltage[1]: 850000 -> 880000 uV
- <6>[ 0.292139 / 01-01 00:00:00.290][0] cpr_adjust_init_voltages: apc1_corner: adjusted initial voltage[2]: 850000 -> 880000 uV
- <6>[ 0.292169 / 01-01 00:00:00.290][0] cpr_adjust_init_voltages: apc1_corner: adjusted initial voltage[3]: 930000 -> 910000 uV
- <6>[ 0.292198 / 01-01 00:00:00.290][0] cpr_adjust_init_voltages: apc1_corner: adjusted initial voltage[4]: 1090000 -> 1070000 uV
- <6>[ 0.292228 / 01-01 00:00:00.290][0] cpr_pvs_init: apc1_corner: pvs voltage: [880000 880000 910000 1070000] uV
- <6>[ 0.292255 / 01-01 00:00:00.290][0] cpr_pvs_init: apc1_corner: ceiling voltage: [900000 900000 1000000 1180000] uV
- <6>[ 0.292281 / 01-01 00:00:00.290][0] cpr_pvs_init: apc1_corner: floor voltage: [640000 640000 745000 850000] uV
- <6>[ 0.292603 / 01-01 00:00:00.290][0] cpr_init_cpr_efuse: apc1_corner: [row:140] = 0xba59d24f292b81d
- <6>[ 0.292650 / 01-01 00:00:00.290][0] cpr_init_cpr_efuse: apc1_corner: Corner[1]: ro_sel = 2, target quot = 730
- <6>[ 0.292679 / 01-01 00:00:00.290][0] cpr_init_cpr_efuse: apc1_corner: Corner[2]: ro_sel = 2, target quot = 730
- <6>[ 0.292705 / 01-01 00:00:00.290][0] cpr_init_cpr_efuse: apc1_corner: Corner[3]: ro_sel = 2, target quot = 920
- <6>[ 0.292733 / 01-01 00:00:00.290][0] cpr_init_cpr_efuse: apc1_corner: Corner[4]: ro_sel = 2, target quot = 1210
- <6>[ 0.292768 / 01-01 00:00:00.290][0] cpr_adjust_target_quots: apc1_corner: Corner[1]: adjusted target quot = 742
- <6>[ 0.292796 / 01-01 00:00:00.290][0] cpr_adjust_target_quots: apc1_corner: Corner[2]: adjusted target quot = 742
- <6>[ 0.292824 / 01-01 00:00:00.290][0] cpr_adjust_target_quots: apc1_corner: Corner[3]: adjusted target quot = 836
- <6>[ 0.292852 / 01-01 00:00:00.290][0] cpr_adjust_target_quots: apc1_corner: Corner[4]: adjusted target quot = 1186
- <6>[ 0.292905 / 01-01 00:00:00.290][0] cpr_minimum_quot_difference_adjustment: apc1_corner: Corner[2]: revised adjusted quotient = 742
- <6>[ 0.292979 / 01-01 00:00:00.290][0] cpr_adjust_target_quot_offsets: apc1_corner: Corner[3]: adjusted target quot = 94
- <6>[ 0.293008 / 01-01 00:00:00.290][0] cpr_adjust_target_quot_offsets: apc1_corner: Corner[4]: adjusted target quot = 350
- <6>[ 0.293106 / 01-01 00:00:00.290][0] cpr_get_corner_quot_adjustment: apc1_corner: fuse corner 2 quotient adjustment scaling factor: 0.000
- <6>[ 0.293130 / 01-01 00:00:00.290][0] cpr_get_corner_quot_adjustment: apc1_corner: fuse corner 3 quotient adjustment scaling factor: 0.287
- <6>[ 0.293154 / 01-01 00:00:00.290][0] cpr_get_corner_quot_adjustment: apc1_corner: fuse corner 4 quotient adjustment scaling factor: 0.405
- <6>[ 0.293185 / 01-01 00:00:00.290][0] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[1] = 742
- <6>[ 0.293207 / 01-01 00:00:00.290][0] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[2] = 742
- <6>[ 0.293230 / 01-01 00:00:00.290][0] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[3] = 742
- <6>[ 0.293251 / 01-01 00:00:00.290][0] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[4] = 742
- <6>[ 0.293274 / 01-01 00:00:00.290][0] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[5] = 742
- <6>[ 0.293296 / 01-01 00:00:00.290][0] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[6] = 781
- <6>[ 0.293318 / 01-01 00:00:00.290][0] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[7] = 809
- <6>[ 0.293340 / 01-01 00:00:00.290][0] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[8] = 836
- <6>[ 0.293363 / 01-01 00:00:00.290][0] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[9] = 953
- <6>[ 0.293385 / 01-01 00:00:00.290][0] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[10] = 992
- <6>[ 0.293407 / 01-01 00:00:00.290][0] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[11] = 1031
- <6>[ 0.293429 / 01-01 00:00:00.290][0] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[12] = 1070
- <6>[ 0.293452 / 01-01 00:00:00.290][0] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[13] = 1109
- <6>[ 0.293474 / 01-01 00:00:00.290][0] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[14] = 1132
- <6>[ 0.293496 / 01-01 00:00:00.290][0] cpr_get_corner_quot_adjustment: apc1_corner: adjusted quotient[15] = 1186
- <6>[ 0.293561 / 01-01 00:00:00.290][0] cpr_check_allowed: apc1_corner: CPR closed loop is enabled for fuse revision 4
- <6>[ 0.293625 / 01-01 00:00:00.290][0] cpr_fill_override_voltage: apc1_corner: ceiling override voltage: [900000 900000 900000 900000 900000 1000000 1000000 1000000 1115000 1115000 1115000 1115000 1115000 1115000 1180000] uV
- <6>[ 0.293679 / 01-01 00:00:00.290][0] cpr_fill_override_voltage: apc1_corner: floor override voltage: [640000 640000 665000 690000 735000 745000 770000 785000 850000 860000 880000 900000 920000 935000 1000000] uV
- <6>[ 0.293784 / 01-01 00:00:00.290][0] cpr_init_cpr_parameters: apc1_corner: up threshold = 2, down threshold = 4
- <6>[ 0.293830 / 01-01 00:00:00.290][0] cpr_init_cpr_parameters: apc1_corner: CPR is enabled by default.
- <6>[ 0.293863 / 01-01 00:00:00.290][0] cpr_config: apc1_corner: Timer count: 0x17700 (for 5000 us)
- <6>[ 0.294139 / 01-01 00:00:00.290][0] apc1_corner: 0 <--> 0 mV
- <6>[ 0.294942 / 01-01 00:00:00.290][0] i2c-msm-v2 f9924000.i2c: probing driver i2c-msm-v2
- <3>[ 0.295052 / 01-01 00:00:00.290][0] i2c-msm-v2 f9924000.i2c: error on clk_get(core_clk):-517
- <3>[ 0.295082 / 01-01 00:00:00.290][0] i2c-msm-v2 f9924000.i2c: error probe() failed with err:-517
- <6>[ 0.295127 / 01-01 00:00:00.290][0] platform f9924000.i2c: Driver i2c-msm-v2 requests probe deferral
- <6>[ 0.295570 / 01-01 00:00:00.290][0] i2c-msm-v2 f9967000.i2c: probing driver i2c-msm-v2
- <3>[ 0.295665 / 01-01 00:00:00.290][0] i2c-msm-v2 f9967000.i2c: error on clk_get(core_clk):-517
- <3>[ 0.295693 / 01-01 00:00:00.290][0] i2c-msm-v2 f9967000.i2c: error probe() failed with err:-517
- <6>[ 0.295730 / 01-01 00:00:00.290][0] platform f9967000.i2c: Driver i2c-msm-v2 requests probe deferral
- <6>[ 0.296104 / 01-01 00:00:00.290][0] i2c-msm-v2 f9928000.i2c: probing driver i2c-msm-v2
- <3>[ 0.296199 / 01-01 00:00:00.290][0] i2c-msm-v2 f9928000.i2c: error on clk_get(core_clk):-517
- <3>[ 0.296227 / 01-01 00:00:00.290][0] i2c-msm-v2 f9928000.i2c: error probe() failed with err:-517
- <6>[ 0.296264 / 01-01 00:00:00.290][0] platform f9928000.i2c: Driver i2c-msm-v2 requests probe deferral
- <6>[ 0.296669 / 01-01 00:00:00.290][0] i2c-msm-v2 f9923000.i2c: probing driver i2c-msm-v2
- <3>[ 0.296760 / 01-01 00:00:00.290][0] i2c-msm-v2 f9923000.i2c: error on clk_get(core_clk):-517
- <3>[ 0.296787 / 01-01 00:00:00.290][0] i2c-msm-v2 f9923000.i2c: error probe() failed with err:-517
- <6>[ 0.296823 / 01-01 00:00:00.290][0] platform f9923000.i2c: Driver i2c-msm-v2 requests probe deferral
- <6>[ 0.297021 / 01-01 00:00:00.290][0] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
- <6>[ 0.297058 / 01-01 00:00:00.290][0] msm-thermal qcom,msm-thermal.65: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- <6>[ 0.298039 / 01-01 00:00:00.290][0] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
- <6>[ 0.300188 / 01-01 00:00:00.290][0] platform f9015000.qcom,cpu-clock-8992: Driver cpu-clock-8994 requests probe deferral
- <6>[ 0.318627 / 01-01 00:00:00.310][0] qcom,rpmcc-8992 fc401880.qcom,rpmcc: Registered RPM clocks.
- <6>[ 0.328296 / 01-01 00:00:00.320][0] qcom,gcc-8992 fc400000.qcom,gcc: Registered GCC clocks.
- <6>[ 0.336937 / 01-01 00:00:00.330][0] qcom,mmsscc-8992 fd8c0000.qcom,mmsscc: Registered MMSS clocks.
- <6>[ 0.338071 / 01-01 00:00:00.330][0] i2c-msm-v2 f9924000.i2c: probing driver i2c-msm-v2
- <3>[ 0.338210 / 01-01 00:00:00.330][0] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- <6>[ 0.338236 / 01-01 00:00:00.330][0] i2c-msm-v2 f9924000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- <6>[ 0.340409 / 01-01 00:00:00.330][1] i2c-msm-v2 f9967000.i2c: probing driver i2c-msm-v2
- <3>[ 0.340549 / 01-01 00:00:00.330][1] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- <6>[ 0.340575 / 01-01 00:00:00.330][1] i2c-msm-v2 f9967000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
- <6>[ 0.343709 / 01-01 00:00:00.340][1] i2c-msm-v2 f9928000.i2c: probing driver i2c-msm-v2
- <3>[ 0.343858 / 01-01 00:00:00.340][1] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- <6>[ 0.343882 / 01-01 00:00:00.340][1] i2c-msm-v2 f9928000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- <6>[ 0.345332 / 01-01 00:00:00.340][1] i2c-msm-v2 f9923000.i2c: probing driver i2c-msm-v2
- <3>[ 0.345473 / 01-01 00:00:00.340][1] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- <6>[ 0.345497 / 01-01 00:00:00.340][1] i2c-msm-v2 f9923000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- <6>[ 0.347381 / 01-01 00:00:00.340][1] cpu-clock-8994 f9015000.qcom,cpu-clock-8992: using A53 speed bin 1 and pvs_ver 0
- <6>[ 0.347439 / 01-01 00:00:00.340][1] cpu-clock-8994 f9015000.qcom,cpu-clock-8992: using A57 speed bin 0(155713568) and pvs_ver 0
- <6>[ 0.381735 / 01-01 00:00:00.380][2] bio: create slab <bio-0> at 0
- <3>[ 0.385048 / 01-01 00:00:00.380][2] mpm_counter: can't find DT node
- <6>[ 0.385108 / 01-01 00:00:00.380][2] socinfo_print: v10, id=251, ver=1.0, raw_id=2409, raw_ver=0, hw_plat=101, hw_plat_ver=11
- <6>[ 0.385108 / 01-01 00:00:00.380][2] accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=0 serial_number=10166624
- <6>[ 0.385995 / 01-01 00:00:00.380][2] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr ffffff8000480000
- <6>[ 0.386247 / 01-01 00:00:00.380][2] Physical OCMEM zone layout:
- <6>[ 0.386274 / 01-01 00:00:00.380][2] zone graphics : 0xfec00000 - 0xfec7ffff ( 512 KB)
- <6>[ 0.386300 / 01-01 00:00:00.380][2] zone video : 0xfec80000 - 0xfecfffff ( 512 KB)
- <6>[ 0.388746 / 01-01 00:00:00.380][2] shared_mem: Unlocked memory 0x00000000e3800000 of size 400000
- <6>[ 0.389006 / 01-01 00:00:00.380][2] shared_mem: Unlocked memory 0x00000000e5400000 of size 12c00000
- <4>[ 0.389611 / 01-01 00:00:00.380][2] init_bcm_wifi: wifi_dma_qos is added
- <4>[ 0.390991 / 01-01 00:00:00.390][2] brcm_init_wlan_mem: WIFI MEM Allocated
- <6>[ 0.391020 / 01-01 00:00:00.390][2] bcm_wifi_init_mem successfully
- <6>[ 0.391097 / 01-01 00:00:00.390][2] bcm_wifi_init_gpio: gpio_wlan_power : 991
- <6>[ 0.391166 / 01-01 00:00:00.390][2] bcm_wifi_init_gpio: gpio_wlan_hostwake : 942
- <6>[ 0.420996 / 01-01 00:00:00.420][2] bcm_wifi_init_gpio successfully
- <0>[ 0.421024 / 01-01 00:00:00.420][2] drv probe : 380 wifi_bcm_lge 40
- <6>[ 0.421854 / 01-01 00:00:00.420][2] dummy_vreg: no parameters
- <6>[ 0.423041 / 01-01 00:00:00.420][2] vgaarb: loaded
- <5>[ 0.424903 / 01-01 00:00:00.420][2] SCSI subsystem initialized
- <6>[ 0.425161 / 01-01 00:00:00.420][2] usbcore: registered new interface driver usbfs
- <6>[ 0.425233 / 01-01 00:00:00.420][2] usbcore: registered new interface driver hub
- <6>[ 0.425512 / 01-01 00:00:00.420][2] usbcore: registered new device driver usb
- <6>[ 0.425698 / 01-01 00:00:00.420][2] media: Linux media interface: v0.10
- <6>[ 0.425757 / 01-01 00:00:00.420][2] Linux video capture interface: v2.00
- <6>[ 0.425816 / 01-01 00:00:00.420][2] pps_core: LinuxPPS API ver. 1 registered
- <6>[ 0.425840 / 01-01 00:00:00.420][2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <<email omitted>>
- <6>[ 0.425880 / 01-01 00:00:00.420][2] PTP clock support registered
- <6>[ 0.429473 / 01-01 00:00:00.420][2] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
- <3>[ 0.429643 / 01-01 00:00:00.420][2] ION-heap mm: Cannot specify alignment for this type of heap
- <6>[ 0.429758 / 01-01 00:00:00.420][2] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
- <6>[ 0.429918 / 01-01 00:00:00.420][2] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
- <6>[ 0.430069 / 01-01 00:00:00.420][2] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
- <6>[ 0.430265 / 01-01 00:00:00.420][2] ION heap system created
- <6>[ 0.430464 / 01-01 00:00:00.420][4] ION heap kmalloc created
- <6>[ 0.430498 / 01-01 00:00:00.420][4] ION heap mm created at 0x00000000e5400000 with size 12c00000
- <6>[ 0.430516 / 01-01 00:00:00.420][4] ION heap adsp created at 0x00000000e5400000 with size 12c00000
- <6>[ 0.430531 / 01-01 00:00:00.420][4] ION heap qsecom created at 0x00000000e3c00000 with size 1800000
- <6>[ 0.430545 / 01-01 00:00:00.420][4] ION heap audio created at 0x00000000e3800000 with size 400000
- <3>[ 0.431108 / 01-01 00:00:00.430][4] msm_bus_fabric_init_driver
- <3>[ 0.431364 / 01-01 00:00:00.430][4] msm_bus_device fc460000.ad-hoc-bus: Dev 1024
- <6>[ 0.431385 / 01-01 00:00:00.430][4] msm_bus_device fc460000.ad-hoc-bus: Util-fact is missing, default to 100
- <6>[ 0.431395 / 01-01 00:00:00.430][4] msm_bus_device fc460000.ad-hoc-bus: Vrail-comp is missing, default to 100
- <3>[ 0.431482 / 01-01 00:00:00.430][4] msm_bus_device fc460000.ad-hoc-bus: Dev 0
- <6>[ 0.431498 / 01-01 00:00:00.430][4] msm_bus_device fc460000.ad-hoc-bus: Vrail-comp is missing, default to 100
- <3>[ 0.431546 / 01-01 00:00:00.430][4] msm_bus_device fc460000.ad-hoc-bus: Dev 4096
- <6>[ 0.431561 / 01-01 00:00:00.430][4] msm_bus_device fc460000.ad-hoc-bus: Util-fact is missing, default to 100
- <6>[ 0.431571 / 01-01 00:00:00.430][4] msm_bus_device fc460000.ad-hoc-bus: Vrail-comp is missing, default to 100
- <3>[ 0.431619 / 01-01 00:00:00.430][4] msm_bus_device fc460000.ad-hoc-bus: Dev 2048
- <6>[ 0.431634 / 01-01 00:00:00.430][4] msm_bus_device fc460000.ad-hoc-bus: Vrail-comp is missing, default to 100
- <3>[ 0.431686 / 01-01 00:00:00.430][4] msm_bus_device fc460000.ad-hoc-bus: Dev 5120
- <6>[ 0.431701 / 01-01 00:00:00.430][4] msm_bus_device fc460000.ad-hoc-bus: Util-fact is missing, default to 100
- <6>[ 0.431711 / 01-01 00:00:00.430][4] msm_bus_device fc460000.ad-hoc-bus: Vrail-comp is missing, default to 100
- <3>[ 0.431754 / 01-01 00:00:00.430][4] msm_bus_device fc460000.ad-hoc-bus: Dev 6144
- <3>[ 0.435060 / 01-01 00:00:00.430][4] msm_bus_init_clk: Valid node clk node 1024 ctx 0
- <3>[ 0.435069 / 01-01 00:00:00.430][4] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid node clk node 0 ctx 0
- <3>[ 0.435122 / 01-01 00:00:00.430][4] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0
- <3>[ 0.435190 / 01-01 00:00:00.430][4] msm_bus_init_clk: Valid node clk node 4096 ctx 1msm_bus_init_clk: Valid node clk node 2048 ctx 0
- <3>[ 0.435256 / 01-01 00:00:00.430][4] msm_bus_init_clk: Valid node clk node 2048 ctx 1msm_bus_init_clk: Valid node clk node 5120 ctx 0
- <3>[ 0.435299 / 01-01 00:00:00.430][4] msm_bus_init_clk: Valid node clk node 5120 ctx 1msm_bus_init_clk: Valid node clk node 6144 ctx 0
- <3>[ 0.435342 / 01-01 00:00:00.430][4] msm_bus_init_clk: Valid node clk node 6144 ctx 1msm_bus_fabric_init: Skip Fab init for virtual device 6144
- <3>[ 0.436709 / 01-01 00:00:00.430][4] msm_bus_init_clk: Valid node clk node 604 ctx 0msm_bus_dev_init_qos: Skipping QOS init for 10039
- <3>[ 0.445418 / 01-01 00:00:00.440][4] msm_bus_dev_init_qos: Skipping QOS init for 58msm_bus_dev_init_qos: Skipping QOS init for 89
- <3>[ 0.445436 / 01-01 00:00:00.440][4] msm_bus_dev_init_qos: Skipping QOS init for 68msm_bus_dev_init_qos: Skipping QOS init for 604
- <3>[ 0.447213 / 01-01 00:00:00.440][4] ipa ipa_uc_state_check:241 uC interface not initialized
- <6>[ 0.448896 / 01-01 00:00:00.440][4] sps:BAM 0x00000000fd4c4000 is registered.
- <3>[ 0.449438 / 01-01 00:00:00.440][4] ipa ipa_uc_state_check:241 uC interface not initialized
- <6>[ 0.449511 / 01-01 00:00:00.440][4] sps:BAM 0x00000000fd4c4000 (va:0xffffff8000420000) enabled: ver:0x24, number of pipes:20
- <3>[ 0.451464 / 01-01 00:00:00.450][4] ipa ipa_uc_state_check:241 uC interface not initialized
- <3>[ 0.453701 / 01-01 00:00:00.450][4] ipa ipa_uc_state_check:241 uC interface not initialized
- <6>[ 0.456603 / 01-01 00:00:00.450][4] IPA driver initialization was successful.
- <6>[ 0.457306 / 01-01 00:00:00.450][4] PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
- <6>[ 0.457424 / 01-01 00:00:00.450][4] PMIC@SID2: PMI8994 v2.0.4 options: 0, 0, 0, 0
- <6>[ 0.457699 / 01-01 00:00:00.450][4] gdsc_venus: no parameters
- <6>[ 0.457905 / 01-01 00:00:00.450][4] gdsc_venus_core0: fast normal
- <6>[ 0.458071 / 01-01 00:00:00.450][4] gdsc_venus_core1: fast normal
- <6>[ 0.458287 / 01-01 00:00:00.450][4] gdsc_camss_top: no parameters
- <6>[ 0.458476 / 01-01 00:00:00.450][4] gdsc_mdss: no parameters
- <6>[ 0.458672 / 01-01 00:00:00.450][4] gdsc_jpeg: no parameters
- <6>[ 0.458689 / 01-01 00:00:00.450][4] gdsc_jpeg: supplied by gdsc_camss_top
- <6>[ 0.458867 / 01-01 00:00:00.450][4] gdsc_vfe: no parameters
- <6>[ 0.458884 / 01-01 00:00:00.450][4] gdsc_vfe: supplied by gdsc_camss_top
- <6>[ 0.459086 / 01-01 00:00:00.450][4] gdsc_cpp: no parameters
- <6>[ 0.459102 / 01-01 00:00:00.450][4] gdsc_cpp: supplied by gdsc_camss_top
- <6>[ 0.459283 / 01-01 00:00:00.450][4] gdsc_oxili_gx: no parameters
- <6>[ 0.459372 / 01-01 00:00:00.450][4] gdsc_oxili_gx: supplied by pmi8994_s2_corner
- <6>[ 0.459559 / 01-01 00:00:00.450][4] gdsc_oxili_cx: no parameters
- <6>[ 0.459705 / 01-01 00:00:00.450][4] gdsc_pcie_0: no parameters
- <6>[ 0.459864 / 01-01 00:00:00.450][4] gdsc_usb30: no parameters
- <6>[ 0.460750 / 01-01 00:00:00.450][4] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
- <6>[ 0.463298 / 01-01 00:00:00.460][4] dsi_pll_clock_register_20nm: Registered DSI PLL clocks successfully
- <6>[ 0.463346 / 01-01 00:00:00.460][4] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
- <6>[ 0.463393 / 01-01 00:00:00.460][4] mdss_pll_util_resource_parse: dfps not enabled!
- <3>[ 0.463404 / 01-01 00:00:00.460][4] mdss_pll_probe: Unable to get the pll 1 base resource
- <6>[ 0.463658 / 01-01 00:00:00.460][4] dsi_pll_clock_register_20nm: Registered DSI PLL clocks successfully
- <6>[ 0.463686 / 01-01 00:00:00.460][4] mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
- <3>[ 0.463698 / 01-01 00:00:00.460][4] mdss_pll_probe: Unable to get the cell-index rc=-22
- <6>[ 0.463736 / 01-01 00:00:00.460][4] mdss_pll_util_resource_parse: dfps not enabled!
- <0>[ 0.594431 / 01-01 00:00:00.590][4] drv probe : 460 mdss_pll 130
- <6>[ 0.596005 / 01-01 00:00:00.590][4] msm_iommu fda64000.qcom,iommu: device jpeg_iommu (model: 0) mapped at ffffff80005c0000, with 3 ctx banks
- <6>[ 0.596980 / 01-01 00:00:00.590][4] msm_iommu fdc84000.qcom,iommu: device venus_iommu (model: 0) mapped at ffffff80005e0000, with 5 ctx banks
- <6>[ 0.598020 / 01-01 00:00:00.590][4] msm_iommu fdb10000.qcom,iommu: device kgsl_iommu (model: 0) mapped at ffffff80006a0000, with 3 ctx banks
- <6>[ 0.598812 / 01-01 00:00:00.590][4] msm_iommu_dev_v1: vfe_iommu: Keeping vfe non-secure
- <6>[ 0.598829 / 01-01 00:00:00.590][4] msm_iommu fda44000.qcom,iommu: device vfe_iommu (model: 0) mapped at ffffff80006c0000, with 3 ctx banks
- <6>[ 0.599548 / 01-01 00:00:00.590][4] msm_iommu fda84000.qcom,iommu: device cpp_iommu (model: 0) mapped at ffffff80006e0000, with 3 ctx banks
- <6>[ 0.600239 / 01-01 00:00:00.590][4] msm_iommu fd9b4000.qcom,iommu: device mdp_iommu (model: 0) mapped at ffffff8000700000, with 3 ctx banks
- <6>[ 0.601953 / 01-01 00:00:00.600][4] msm_iommu_ctx fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
- <6>[ 0.602058 / 01-01 00:00:00.600][4] msm_iommu_ctx fda6d000.qcom,iommu-ctx: context jpeg_dma using bank 1
- <6>[ 0.602157 / 01-01 00:00:00.600][4] msm_iommu_ctx fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
- <6>[ 0.602266 / 01-01 00:00:00.600][4] msm_iommu_ctx fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
- <6>[ 0.602382 / 01-01 00:00:00.600][4] msm_iommu_ctx fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
- <6>[ 0.602479 / 01-01 00:00:00.600][4] msm_iommu_ctx fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
- <6>[ 0.602579 / 01-01 00:00:00.600][4] msm_iommu_ctx fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
- <6>[ 0.602673 / 01-01 00:00:00.600][4] msm_iommu_ctx fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
- <6>[ 0.602782 / 01-01 00:00:00.600][4] msm_iommu_ctx fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
- <6>[ 0.602875 / 01-01 00:00:00.600][4] msm_iommu_ctx fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
- <6>[ 0.602980 / 01-01 00:00:00.600][4] msm_iommu_ctx fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
- <6>[ 0.603087 / 01-01 00:00:00.600][4] msm_iommu_ctx fda4c000.qcom,iommu-ctx: context vfe using bank 0
- <6>[ 0.603180 / 01-01 00:00:00.600][4] msm_iommu_ctx fda4d000.qcom,iommu-ctx: context cpp using bank 1
- <6>[ 0.603273 / 01-01 00:00:00.600][4] msm_iommu_ctx fda4e000.qcom,iommu-ctx: context vfe_secure using bank 2
- <6>[ 0.603385 / 01-01 00:00:00.600][4] msm_iommu_ctx fda8c000.qcom,iommu-ctx: context cpp_0 using bank 0
- <6>[ 0.603492 / 01-01 00:00:00.600][4] msm_iommu_ctx fda8d000.qcom,iommu-ctx: context cpp_1 using bank 1
- <6>[ 0.603588 / 01-01 00:00:00.600][4] msm_iommu_ctx fda8e000.qcom,iommu-ctx: context cpp_2 using bank 2
- <6>[ 0.603697 / 01-01 00:00:00.600][4] msm_iommu_ctx fd9bc000.qcom,iommu-ctx: context mdp_0 using bank 0
- <6>[ 0.603803 / 01-01 00:00:00.600][4] msm_iommu_ctx fd9bd000.qcom,iommu-ctx: context mdp_1 using bank 1
- <6>[ 0.603907 / 01-01 00:00:00.600][4] msm_iommu_ctx fd9be000.qcom,iommu-ctx: context mdp_2 using bank 2
- <6>[ 0.605285 / 01-01 00:00:00.600][4] Advanced Linux Sound Architecture Driver Initialized.
- <6>[ 0.605625 / 01-01 00:00:00.600][4] Bluetooth: Core ver 2.16
- <6>[ 0.605666 / 01-01 00:00:00.600][4] NET: Registered protocol family 31
- <6>[ 0.605675 / 01-01 00:00:00.600][4] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.605691 / 01-01 00:00:00.600][4] Bluetooth: HCI socket layer initialized
- <6>[ 0.605705 / 01-01 00:00:00.600][4] Bluetooth: L2CAP socket layer initialized
- <6>[ 0.605738 / 01-01 00:00:00.600][4] Bluetooth: SCO socket layer initialized
- <6>[ 0.605917 / 01-01 00:00:00.600][4] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 0.605941 / 01-01 00:00:00.600][4] cfg80211: World regulatory domain updated:
- <6>[ 0.605951 / 01-01 00:00:00.600][4] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- <6>[ 0.605961 / 01-01 00:00:00.600][4] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.605971 / 01-01 00:00:00.600][4] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.605980 / 01-01 00:00:00.600][4] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.605989 / 01-01 00:00:00.600][4] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.605998 / 01-01 00:00:00.600][4] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.606007 / 01-01 00:00:00.600][4] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.606016 / 01-01 00:00:00.600][4] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- <6>[ 0.606025 / 01-01 00:00:00.600][4] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
- <1>[ 0.606190 / 01-01 00:00:00.600][4] pcie:pcie_init.
- <6>[ 0.608606 / 01-01 00:00:00.600][4] Switching to clocksource arch_sys_counter
- <6>[ 0.627032 / 01-01 00:00:00.609][4] bcl_peripheral:bcl_perph_init BCL Initialized
- <3>[ 0.629529 / 01-01 00:00:00.619][4] MAX_CPUs : 6
- <3>[ 0.629546 / 01-01 00:00:00.619][4] csiblings[0] = 0x0
- <3>[ 0.629555 / 01-01 00:00:00.619][4] csiblings[1] = 0x0
- <3>[ 0.629564 / 01-01 00:00:00.619][4] csiblings[2] = 0x0
- <3>[ 0.629572 / 01-01 00:00:00.619][4] csiblings[3] = 0x0
- <3>[ 0.629581 / 01-01 00:00:00.619][4] csiblings[4] = 0x1
- <3>[ 0.629589 / 01-01 00:00:00.619][4] csiblings[5] = 0x1
- <3>[ 0.629598 / 01-01 00:00:00.619][4] lcluster_cores : 4, bcluster_cores : 2
- <6>[ 0.629820 / 01-01 00:00:00.619][4] NET: Registered protocol family 2
- <6>[ 0.630165 / 01-01 00:00:00.619][4] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
- <6>[ 0.630414 / 01-01 00:00:00.619][4] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- <6>[ 0.630695 / 01-01 00:00:00.619][4] TCP: Hash tables configured (established 32768 bind 32768)
- <6>[ 0.630786 / 01-01 00:00:00.619][4] TCP: reno registered
- <6>[ 0.630800 / 01-01 00:00:00.619][4] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- <6>[ 0.630841 / 01-01 00:00:00.619][4] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- <6>[ 0.631050 / 01-01 00:00:00.619][4] NET: Registered protocol family 1
- <7>[ 0.631082 / 01-01 00:00:00.619][4] PCI: CLS 0 bytes, default 64
- <6>[ 0.631285 / 01-01 00:00:00.619][4] Trying to unpack rootfs image as initramfs...
- <6>[ 0.661583 / 01-01 00:00:00.649][4] Freeing initrd memory: 1208K (ffffffc002200000 - ffffffc00232e000)
- <5>[ 0.664935 / 01-01 00:00:00.649][4] Initialise module verification
- <6>[ 0.664982 / 01-01 00:00:00.649][4] audit: initializing netlink socket (disabled)
- <5>[ 0.665023 / 01-01 00:00:00.649][4] type=2000 audit(0.649:1): initialized
- <4>[ 0.667301 / 01-01 00:00:00.649][4] error setting kswapd cpu affinity mask
- <6>[ 0.670108 / 01-01 00:00:00.659][4] Registering sdcardfs 0.1
- <6>[ 0.670179 / 01-01 00:00:00.659][4] fuse init (API version 7.23)
- <6>[ 0.670324 / 01-01 00:00:00.659][4] msgmni has been set to 7390
- <7>[ 0.670365 / 01-01 00:00:00.659][4] SELinux: Registering netfilter hooks
- <6>[ 0.672948 / 01-01 00:00:00.659][4] FIPS: running power-on self-tests
- <5>[ 0.672973 / 01-01 00:00:00.659][4] Key type asymmetric registered
- <5>[ 0.672984 / 01-01 00:00:00.659][4] Asymmetric key parser 'x509' registered
- <6>[ 0.673074 / 01-01 00:00:00.659][4] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- <6>[ 0.673088 / 01-01 00:00:00.659][4] io scheduler noop registered
- <6>[ 0.673097 / 01-01 00:00:00.659][4] io scheduler deadline registered
- <6>[ 0.673110 / 01-01 00:00:00.659][4] io scheduler row registered
- <6>[ 0.673163 / 01-01 00:00:00.659][4] io scheduler cfq registered (default)
- <6>[ 0.677117 / 01-01 00:00:00.659][4] platform qcom,smp2pgpio-ssr-smp2p-2-in.13: Driver smp2pgpio requests probe deferral
- <6>[ 0.677213 / 01-01 00:00:00.659][4] platform qcom,smp2pgpio-ssr-smp2p-2-out.14: Driver smp2pgpio requests probe deferral
- <6>[ 0.677291 / 01-01 00:00:00.659][4] platform qcom,smp2pgpio-ssr-smp2p-1-in.15: Driver smp2pgpio requests probe deferral
- <6>[ 0.677368 / 01-01 00:00:00.659][4] platform qcom,smp2pgpio-ssr-smp2p-1-out.16: Driver smp2pgpio requests probe deferral
- <6>[ 0.678142 / 01-01 00:00:00.659][4] [LCD][LM3697] lm3697_probe: i2c probe start
- <6>[ 0.678380 / 01-01 00:00:00.659][4] [LM3697] lm3697_parse_dt gpio: 940, max_current: 19, min: 1, default: 46, max: 255, pwm : 0 , blmap_size : 256
- <6>[ 0.678391 / 01-01 00:00:00.659][4] [LCD][LM3697] lm3697_probe: gpio = 940
- <3>[ 0.678648 / 01-01 00:00:00.659][4] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
- <3>[ 0.678673 / 01-01 00:00:00.659][4] mdss_mdp_probe+0x268/0xe20->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
- <4>[ 0.678731 / 01-01 00:00:00.669][4] mdss_mdp_parse_dt_hw_settings: MDSS VBIF settings not found
- <6>[ 0.678824 / 01-01 00:00:00.669][4] mdss_mdp_pipe_addr_setup: type:1 ftchid:1 xinid:0 num:0 ndx:0x1 prio:0
- <6>[ 0.678834 / 01-01 00:00:00.669][4] mdss_mdp_pipe_addr_setup: type:1 ftchid:4 xinid:4 num:1 ndx:0x2 prio:1
- <6>[ 0.678843 / 01-01 00:00:00.669][4] mdss_mdp_pipe_addr_setup: type:1 ftchid:7 xinid:8 num:2 ndx:0x4 prio:2
- <6>[ 0.678857 / 01-01 00:00:00.669][4] mdss_mdp_pipe_addr_setup: type:2 ftchid:16 xinid:1 num:3 ndx:0x8 prio:3
- <6>[ 0.678866 / 01-01 00:00:00.669][4] mdss_mdp_pipe_addr_setup: type:2 ftchid:17 xinid:5 num:4 ndx:0x10 prio:4
- <6>[ 0.678875 / 01-01 00:00:00.669][4] mdss_mdp_pipe_addr_setup: type:2 ftchid:18 xinid:9 num:5 ndx:0x20 prio:5
- <6>[ 0.678890 / 01-01 00:00:00.669][4] mdss_mdp_pipe_addr_setup: type:3 ftchid:10 xinid:2 num:6 ndx:0x40 prio:6
- <6>[ 0.678900 / 01-01 00:00:00.669][4] mdss_mdp_pipe_addr_setup: type:3 ftchid:13 xinid:10 num:7 ndx:0x80 prio:7
- <3>[ 0.678920 / 01-01 00:00:00.669][4] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
- <6>[ 0.678964 / 01-01 00:00:00.669][4] mdss_mdp_pipe_addr_setup: type:4 ftchid:-1 xinid:7 num:10 ndx:0x400 prio:0
- <6>[ 0.678973 / 01-01 00:00:00.669][4] mdss_mdp_parse_dt_pipe: dedicated vp cursors detected, num=1
- <3>[ 0.679109 / 01-01 00:00:00.669][4] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
- <3>[ 0.679122 / 01-01 00:00:00.669][4] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-cmd : u32 array read
- <6>[ 0.679139 / 01-01 00:00:00.669][4] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-clk-levels : doesn't exist in device tree
- <3>[ 0.679421 / 01-01 00:00:00.669][4] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
- <3>[ 0.679887 / 01-01 00:00:00.669][4] getpath: Cannot locate src dev 36
- <3>[ 0.679898 / 01-01 00:00:00.669][4] register_client_adhoc:Failed to find path.src 36 dest 627<4>[ 0.679911 / 01-01 00:00:00.669][4] mdss_mdp_bus_scale_register: reg_bus_client register failed
- <6>[ 0.680185 / 01-01 00:00:00.669][4] xlog_status: enable:0, panic:0, dump:2
- <6>[ 0.681442 / 01-01 00:00:00.669][4] mdss_mdp_probe: mdss version = 0x100a0000, bootloader display is on
- <6>[ 0.682695 / 01-01 00:00:00.669][4] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- <6>[ 0.682961 / 01-01 00:00:00.669][4] lgd_qhd_command_dsi_panel_set_voltage: vpnl_touch voltage is modified. min=3300000 max=3300000 DDIC rev=3
- <3>[ 0.682998 / 01-01 00:00:00.669][4] lge_mdss_dsi_seperate_panel_api_init: dtsi#:25, header#:24
- <6>[ 0.683015 / 01-01 00:00:00.669][4] mdss_dsi_panel_init: Panel Name = LGD SIC LG4945 INCELL 1440p Dual 0 cmd mode dsi panel
- <6>[ 0.683026 / 01-01 00:00:00.669][4] lgd_qhd_command_mdss_dsi_panel_init: panel_type is LGD_LG4945_INCELL_CMD_PANEL
- <6>[ 0.683035 / 01-01 00:00:00.669][4] panel_type is 4
- <6>[ 0.683205 / 01-01 00:00:00.669][4] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_lgd_lg4945_1440p_mipi0_cmd" (ffffffc0dd6a3898)
- <3>[ 0.683230 / 01-01 00:00:00.669][4] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
- <3>[ 0.683279 / 01-01 00:00:00.669][4] mdss_dsi_clk_div_config: forcing mdss_dsi lanes to 1
- <3>[ 0.683289 / 01-01 00:00:00.669][4] mdss_dsi_clk_div_config: requested Lanes, 0 & BPP, 2, not supported
- <3>[ 0.683299 / 01-01 00:00:00.669][4] mdss_dsi_clk_refresh: unable to initialize the clk dividers
- <3>[ 0.683457 / 01-01 00:00:00.669][4] mdss_dsi_parse_dcs_cmds: failed, key=lge,mdss-dsi-clk_on-command
- <3>[ 0.683470 / 01-01 00:00:00.669][4] mdss_dsi_parse_dcs_cmds: failed, key=lge,mdss-dsi-clk_off-command
- <6>[ 0.683547 / 01-01 00:00:00.669][4] lgd_qhd_command_mdss_panel_parse_dt: parse img tune 0 cmd = 0xB0
- <6>[ 0.683561 / 01-01 00:00:00.669][4] lgd_qhd_command_mdss_panel_parse_dt: parse img tune 1 cmd = 0xB0
- <3>[ 0.683597 / 01-01 00:00:00.669][4] mdss_dsi_parse_dcs_cmds: failed, key=mode-change-cmds-proximity-u3-to-u2-rev3
- <6>[ 0.683611 / 01-01 00:00:00.669][4] mdss_dsi_parse_panel_features: partial_update_enabled=1
- <6>[ 0.683627 / 01-01 00:00:00.669][4] mdss_dsi_parse_panel_features: ulps feature disabled
- <6>[ 0.683638 / 01-01 00:00:00.669][4] mdss_dsi_parse_panel_features: ulps during suspend feature enabled
- <6>[ 0.683650 / 01-01 00:00:00.669][4] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
- <3>[ 0.683673 / 01-01 00:00:00.669][4] mdss_dsi_parse_panel_features:1456, Disp_en gpio not specified
- <6>[ 0.683689 / 01-01 00:00:00.669][4] mdss_dsi_panel_init: Continuous splash enabled
- <3>[ 0.684003 / 01-01 00:00:00.669][4] dsi_panel_device_register:2197, Disp_en gpio not specified
- <3>[ 0.684015 / 01-01 00:00:00.669][4] dsi_panel_device_register:2205, TE gpio not specified
- <6>[ 0.684025 / 01-01 00:00:00.669][4] dsi_panel_device_register: bklt_en gpio not specified
- <6>[ 0.684076 / 01-01 00:00:00.669][4] lgd_qhd_command_dsi_panel_device_register: dsv_vendor = DW
- <6>[ 0.684145 / 01-01 00:00:00.669][4] lgd_qhd_command_dsi_panel_device_register vddio_en = 988
- <6>[ 0.684155 / 01-01 00:00:00.669][4] lgd_qhd_command_dsi_panel_device_register dsv_ena = 967, dsv_enb = 0, dsv_manufacturer = 3
- <6>[ 0.684388 / 01-01 00:00:00.669][4] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff80005bc000 ctrl_size=260 phy_base=ffffff80005be500 phy_size=280
- <6>[ 0.684400 / 01-01 00:00:00.669][4] mdss_dsi_retrieve_ctrl_resources: phy_regulator_base=ffffff80005dc780 phy_regulator_size=30
- <6>[ 0.685005 / 01-01 00:00:00.669][4] mdss_dsi_panel_power_ctrl: cur_power_state=0 req_power_state=1
- <6>[ 0.698730 / 01-01 00:00:00.689][4] lgd_sic_qhd_command_mdss_dsi_panel_reset: enable = 1, ndx = 0
- <6>[ 0.698992 / 01-01 00:00:00.689][4] mdss_register_panel: adding framebuffer device fd994000.qcom,mdss_dsi
- <6>[ 0.699294 / 01-01 00:00:00.689][4] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
- <3>[ 0.699314 / 01-01 00:00:00.689][4] mdss_dsi_pinctrl_init: failed to get pinctrl
- <4>[ 0.699323 / 01-01 00:00:00.689][4] mdss_dsi_ctrl_probe: failed to get pin resources
- <6>[ 0.699380 / 01-01 00:00:00.689][4] lgd_qhd_command_dsi_panel_set_voltage: vpnl_touch voltage is modified. min=3300000 max=3300000 DDIC rev=3
- <6>[ 0.699408 / 01-01 00:00:00.689][4] mdss_dsi_panel_init: Panel Name = LGD SIC LG4945 INCELL 1440p Dual 1 cmd mode dsi panel
- <6>[ 0.699420 / 01-01 00:00:00.689][4] lgd_qhd_command_mdss_dsi_panel_init: panel_type is LGD_LG4945_INCELL_CMD_PANEL
- <6>[ 0.699429 / 01-01 00:00:00.689][4] panel_type is 4
- <6>[ 0.699470 / 01-01 00:00:00.689][4] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_lgd_lg4945_1440p_mipi1_cmd" (ffffffc0dd6a3898)
- <3>[ 0.699492 / 01-01 00:00:00.689][4] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
- <3>[ 0.699541 / 01-01 00:00:00.689][4] mdss_dsi_clk_div_config: forcing mdss_dsi lanes to 1
- <3>[ 0.699550 / 01-01 00:00:00.689][4] mdss_dsi_clk_div_config: requested Lanes, 0 & BPP, 2, not supported
- <3>[ 0.699559 / 01-01 00:00:00.689][4] mdss_dsi_clk_refresh: unable to initialize the clk dividers
- <3>[ 0.699717 / 01-01 00:00:00.689][4] mdss_dsi_parse_dcs_cmds: failed, key=lge,mdss-dsi-clk_on-command
- <3>[ 0.699729 / 01-01 00:00:00.689][4] mdss_dsi_parse_dcs_cmds: failed, key=lge,mdss-dsi-clk_off-command
- <6>[ 0.699811 / 01-01 00:00:00.689][4] lgd_qhd_command_mdss_panel_parse_dt: parse img tune 0 cmd = 0xB0
- <6>[ 0.699825 / 01-01 00:00:00.689][4] lgd_qhd_command_mdss_panel_parse_dt: parse img tune 1 cmd = 0xB0
- <3>[ 0.699860 / 01-01 00:00:00.689][4] mdss_dsi_parse_dcs_cmds: failed, key=mode-change-cmds-proximity-u3-to-u2-rev3
- <6>[ 0.699873 / 01-01 00:00:00.689][4] mdss_dsi_parse_panel_features: partial_update_enabled=1
- <6>[ 0.699890 / 01-01 00:00:00.689][4] mdss_dsi_parse_panel_features: ulps feature disabled
- <6>[ 0.699901 / 01-01 00:00:00.689][4] mdss_dsi_parse_panel_features: ulps during suspend feature enabled
- <6>[ 0.699911 / 01-01 00:00:00.689][4] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
- <3>[ 0.699933 / 01-01 00:00:00.689][4] mdss_dsi_parse_panel_features:1456, Disp_en gpio not specified
- <6>[ 0.699949 / 01-01 00:00:00.689][4] mdss_dsi_panel_init: Continuous splash enabled
- <3>[ 0.700296 / 01-01 00:00:00.689][4] dsi_panel_device_register:2197, Disp_en gpio not specified
- <3>[ 0.700308 / 01-01 00:00:00.689][4] dsi_panel_device_register:2205, TE gpio not specified
- <6>[ 0.700318 / 01-01 00:00:00.689][4] dsi_panel_device_register: bklt_en gpio not specified
- <6>[ 0.700382 / 01-01 00:00:00.689][4] lgd_qhd_command_dsi_panel_device_register: dsv_vendor = DW
- <6>[ 0.700458 / 01-01 00:00:00.689][4] lgd_qhd_command_dsi_panel_device_register vddio_en = 988
- <6>[ 0.700467 / 01-01 00:00:00.689][4] lgd_qhd_command_dsi_panel_device_register dsv_ena = 967, dsv_enb = 0, dsv_manufacturer = 3
- <6>[ 0.700698 / 01-01 00:00:00.689][4] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8000684000 ctrl_size=260 phy_base=ffffff8000686500 phy_size=280
- <6>[ 0.700708 / 01-01 00:00:00.689][4] mdss_dsi_retrieve_ctrl_resources: phy_regulator_base=ffffff8000688780 phy_regulator_size=30
- <6>[ 0.701162 / 01-01 00:00:00.689][4] mdss_dsi_panel_power_ctrl: cur_power_state=0 req_power_state=1
- <6>[ 0.701176 / 01-01 00:00:00.689][4] lgd_sic_qhd_command_mdss_dsi_panel_reset: enable = 1, ndx = 1
- <3>[ 0.701466 / 01-01 00:00:00.689][4] panel_debug_register_base: debugfs_create_file: offset fail
- <6>[ 0.702091 / 01-01 00:00:00.689][4] mdss_dsi_status_init: DSI status check interval:5000
- <3>[ 0.703035 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_data: id=0
- <3>[ 0.703047 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_HPD_PM'
- <3>[ 0.703060 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_gpio_data: no gpio
- <3>[ 0.703069 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_DDC_PM'
- <3>[ 0.703079 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_gpio_data: no gpio
- <3>[ 0.703087 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_CORE_PM'
- <3>[ 0.703096 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_gpio_data: no gpio
- <3>[ 0.703105 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_CEC_PM'
- <3>[ 0.703113 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_gpio_data: no gpio
- <3>[ 0.703122 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_HPD_PM'
- <3>[ 0.703140 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_vreg_data: hpd-gdsc min=0, max=0, enable=0 disable=0
- <3>[ 0.703150 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_DDC_PM'
- <3>[ 0.703161 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_vreg_data: no vreg
- <3>[ 0.703168 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_CORE_PM'
- <3>[ 0.703184 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_vreg_data: core-vdda min=1800000, max=1800000, enable=300000 disable=0
- <3>[ 0.703196 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_vreg_data: core-vcc min=1800000, max=1800000, enable=0 disable=0
- <3>[ 0.703205 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_CEC_PM'
- <3>[ 0.703216 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_vreg_data: no vreg
- <3>[ 0.703224 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_HPD_PM'
- <3>[ 0.703234 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_DDC_PM'
- <3>[ 0.703242 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_clk_data: no clk
- <3>[ 0.703251 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_CORE_PM'
- <3>[ 0.703260 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_CEC_PM'
- <3>[ 0.703268 / 01-01 00:00:00.689][4] hdmi_tx_get_dt_clk_data: no clk
- <6>[ 0.703979 / 01-01 00:00:00.689][4] hdmi_tx_init_resource: 'core_physical': start = 0xffffff8000692000, len=0x38c
- <3>[ 0.703989 / 01-01 00:00:00.689][4] msm_dss_get_res_byname: 'phy_physical' resource not found
- <3>[ 0.704009 / 01-01 00:00:00.689][4] hdmi_tx_probe+0xf5c/0x16c4->msm_dss_ioremap_byname: 'phy_physical' msm_dss_get_res_byname failed
- <3>[ 0.704018 / 01-01 00:00:00.689][4] hdmi_tx_init_resource: 'phy_physical' remap failed or not available
- <6>[ 0.704027 / 01-01 00:00:00.689][4] hdmi_tx_init_resource: 'phy_physical': start = 0x (null), len=0x0
- <6>[ 0.704039 / 01-01 00:00:00.689][4] hdmi_tx_init_resource: 'qfprom_physical': start = 0xffffff8000698000, len=0x6fff
- <3>[ 0.704318 / 01-01 00:00:00.689][4] hdmi_tx_check_capability: Features <HDMI:ON, HDCP:ON>
- <3>[ 0.704330 / 01-01 00:00:00.689][4] hdmi_tx_check_capability: Device is HDCP enabled
- <6>[ 0.705036 / 01-01 00:00:00.689][0] mdss_register_panel: adding framebuffer device fd9a0000.qcom,hdmi_tx
- <3>[ 0.705400 / 01-01 00:00:00.689][0] hdmi_tx_probe: Add child devices.
- <6>[ 0.706478 / 01-01 00:00:00.689][0] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.17
- <6>[ 0.707798 / 01-01 00:00:00.689][0] mdss_fb_register: FrameBuffer[0] 1440x2720 registered successfully!
- <6>[ 0.707814 / 01-01 00:00:00.689][0] mdss_fb_parse_dt_split: device tree split left=0 right=0
- <4>[ 0.707909 / 01-01 00:00:00.689][0] mdss_mdp_get_ad: AD not supported on display num 0 hw config
- <4>[ 0.707920 / 01-01 00:00:00.689][0] mdss_mdp_pp_resume: Failed to get AD info, err = -1
- <4>[ 0.707933 / 01-01 00:00:00.689][0] mdss_mdp_pp_resume: invalid dspp_num
- <6>[ 0.708481 / 01-01 00:00:00.689][0] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
- <3>[ 0.708540 / 01-01 00:00:00.689][0] hdmi_tx_panel_event_handler: event = 14 suspend=0, hpd_feature=0
- <3>[ 0.708568 / 01-01 00:00:00.689][0] hdmi_tx_sysfs_create: sysfs group ffffffc0db542410
- <3>[ 0.708646 / 01-01 00:00:00.689][0] hdmi_tx_init_features: HDCP feature initialized
- <3>[ 0.708748 / 01-01 00:00:00.699][0] mdss_mdp_splash_parse_dt: splash mem child node is not present
- <6>[ 0.708844 / 01-01 00:00:00.699][0] mdss_fb_register: FrameBuffer[2] 640x480 registered successfully!
- <3>[ 0.708894 / 01-01 00:00:00.699][0] mdss_mdp_splash_parse_dt: splash mem child node is not present
- <3>[ 0.709029 / 01-01 00:00:00.699][1] [anx7816] anx7816_i2c_probe start
- <6>[ 0.709312 / 01-01 00:00:00.699][1] [anx7816] gpio p_dwn : 866, reset : 947, irq : 879, gpio_cbl_det 865
- <6>[ 0.709334 / 01-01 00:00:00.699][1] [anx7816] v10 is regulator and avdd33-en-gpio 867
- <6>[ 0.709445 / 01-01 00:00:00.699][1] anx7816 init gpio
- <3>[ 0.710024 / 01-01 00:00:00.699][2] msm_hdmi_register_slimport: success
- <6>[ 0.710039 / 01-01 00:00:00.699][2] [anx7816] anx7816_i2c_probe end
- <4>[ 0.710089 / 01-01 00:00:00.699][2] i2c-core: driver [anx7816] using legacy suspend method
- <4>[ 0.710100 / 01-01 00:00:00.699][2] i2c-core: driver [anx7816] using legacy resume method
- <3>[ 0.711804 / 01-01 00:00:00.699][0] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
- <5>[ 0.713679 / 01-01 00:00:00.699][0] msm_rpm_log_probe: OK
- <3>[ 0.716830 / 01-01 00:00:00.699][0] subsys-pil-tz fe200000.qcom,lpass: [adsp]: Error getting proxy unvoting gpio
- <6>[ 0.716902 / 01-01 00:00:00.699][0] platform fe200000.qcom,lpass: Driver subsys-pil-tz requests probe deferral
- <3>[ 0.718337 / 01-01 00:00:00.699][4] pil-q6v5-mss fc880000.qcom,mss: [modem]: Error getting proxy unvoting gpio
- <6>[ 0.718529 / 01-01 00:00:00.699][4] platform fc880000.qcom,mss: Driver pil-q6v5-mss requests probe deferral
- <6>[ 0.720393 / 01-01 00:00:00.709][4] bootlog_probe: start 0x348e
- <6>[ 0.720406 / 01-01 00:00:00.709][4] bootlog_probe: size 0x1fff4
- <6>[ 0.720415 / 01-01 00:00:00.709][4] -------------------------------------------------
- <6>[ 0.720424 / 01-01 00:00:00.709][4] below logs are got from bootloader
- <6>[ 0.720432 / 01-01 00:00:00.709][4] -------------------------------------------------
- <6>[ 0.720441 / 01-01 00:00:00.709][4]
- <6>[ 0.720459 / 01-01 00:00:00.709][4] [0] welcome to lk
- <6>[ 0.720468 / 01-01 00:00:00.709][4]
- <6>[ 0.720487 / 01-01 00:00:00.709][4] [10] platform_init()
- <6>[ 0.720522 / 01-01 00:00:00.709][4] [10] Configured XPU violations to be fatal errors
- <6>[ 0.720540 / 01-01 00:00:00.709][4] [10] target_init()
- <6>[ 0.720564 / 01-01 00:00:00.709][4] [40] SDHC Running in HS400 mode
- <6>[ 0.720625 / 01-01 00:00:00.709][4] [40] [FS] tuned_phase_cnt: 15 tuned_phases = [ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 13, 14, 15, ]
- <6>[ 0.720664 / 01-01 00:00:00.709][4] [40] [FS] sdhci_msm_execute_tuning: Tuned Phase: 0x00000005
- <6>[ 0.720702 / 01-01 00:00:00.709][4] [40] [FS] sdhci_msm_execute_tuning: READ CDR_PHASE(0x5)
- <6>[ 0.720729 / 01-01 00:00:00.709][4] [50] Done initialization of the card
- <6>[ 0.720759 / 01-01 00:00:00.709][4] [60] [KSwitch] ftm kill switch item value=
- <6>[ 0.720807 / 01-01 00:00:00.709][4] [60] [KSwitch] (kswitch_load_flag): ftm kill switch item has invalid format
- <6>[ 0.720853 / 01-01 00:00:00.709][4] [60] bootmode_set_board_revision: board revision value is 11 from smem
- <6>[ 0.720892 / 01-01 00:00:00.709][4] [60] bootmode_set_lcd_maker_id: lcd maker id is 0 from smem
- <6>[ 0.720911 / 01-01 00:00:00.709][4] [60] batt_info = 187
- <6>[ 0.720954 / 01-01 00:00:00.709][4] [60] bootmode_set_cable: usb cable type/port type is 8/0 from smem
- <6>[ 0.721000 / 01-01 00:00:00.709][4] [60] sbl_log_init : sbl_log=0x707f3c0, log_size=3136, delta_time=2457049
- <6>[ 0.721027 / 01-01 00:00:00.709][4] S - Authentication Time, 70698 us
- <6>[ 0.721049 / 01-01 00:00:00.709][4] S - DDR Frequency, 931 MHz
- <6>[ 0.721066 / 01-01 00:00:00.709][4] B - 2472757 -
- <6>[ 0.721101 / 01-01 00:00:00.709][4] e Boot(Power On Reset), D - Delta, S - Statistic
- <6>[ 0.721131 / 01-01 00:00:00.709][4] B - 512217 - Earjack Debugger Detected
- <6>[ 0.721165 / 01-01 00:00:00.709][4] S - QC_IMAGE_VERSION_STRING=BOOT.BF.2.3-00366
- <6>[ 0.721192 / 01-01 00:00:00.709][4] S - IMAGE_VARIANT_STRING=ESAAANAZA
- <6>[ 0.721221 / 01-01 00:00:00.709][4] S - OEM_IMAGE_VERSION_STRING=LGEACI5R7
- <6>[ 0.721245 / 01-01 00:00:00.709][4] S - Boot Config, 0x000003c1
- <6>[ 0.721268 / 01-01 00:00:00.709][4] S - Core 0 Frequency, 0 MHz
- <6>[ 0.721292 / 01-01 00:00:00.709][4] B - 479277 - SBL1, Start
- <6>[ 0.721329 / 01-01 00:00:00.709][4] B - 536708 - scatterload_region && ram_init, Start
- <6>[ 0.721366 / 01-01 00:00:00.709][4] D - 6740 - scatterload_region && ram_init, Delta
- <6>[ 0.721395 / 01-01 00:00:00.709][4] B - 562084 - boot_flash_init, Start
- <6>[ 0.721425 / 01-01 00:00:00.709][4] D - 30 - boot_flash_init, Delta
- <6>[ 0.721460 / 01-01 00:00:00.709][4] B - 562633 - sbl1_ddr_set_default_params, Start
- <6>[ 0.721495 / 01-01 00:00:00.709][4] D - 488 - sbl1_ddr_set_default_params, Delta
- <6>[ 0.721530 / 01-01 00:00:00.709][4] B - 571814 - boot_config_data_table_init, Start
- <6>[ 0.721572 / 01-01 00:00:00.709][4] D - 30 - boot_config_data_table_init, Delta - (0 Bytes)
- <6>[ 0.721599 / 01-01 00:00:00.709][4] B - 581940 - Image Load, Start
- <6>[ 0.721637 / 01-01 00:00:00.709][4] D - 40626 - PMIC Image Loaded, Delta - (32280 Bytes)
- <6>[ 0.721666 / 01-01 00:00:00.709][4] B - 624030 - pm_device_init, Start
- <6>[ 0.721709 / 01-01 00:00:00.709][4] B - 624792 - PON REASON:2>PM0:0x2000000200a0 PM1:0x2000200a0
- <6>[ 0.721737 / 01-01 00:00:00.709][4] D - 38094 - pm_device_init, Delta
- <6>[ 0.721765 / 01-01 00:00:00.709][4] B - 662704 - pm_driver_init, Start
- <6>[ 0.721793 / 01-01 00:00:00.709][4] D - 14091 - pm_driver_init, Delta
- <6>[ 0.721820 / 01-01 00:00:00.709][4] B - 677161 - vsense_init, Start
- <6>[ 0.721847 / 01-01 00:00:00.709][4] D - 0 - vsense_init, Delta
- <6>[ 0.721873 / 01-01 00:00:00.709][4] B - 680424 - cpr_init, Start
- <6>[ 0.721900 / 01-01 00:00:00.709][4] D - 11071 - cpr_init, Delta
- <6>[ 0.721930 / 01-01 00:00:00.709][4] B - 694332 - Pre_DDR_clock_init, Start
- <6>[ 0.721961 / 01-01 00:00:00.709][4] D - 335 - Pre_DDR_clock_init, Delta
- <6>[ 0.722004 / 01-01 00:00:00.709][4] B - 699731 - boot_log_ddr_info::ver=1503311121, ch=0x3, cs=0x3
- <6>[ 0.722051 / 01-01 00:00:00.709][4] B - 704184 - boot_log_ddr_info::sk hynix ddr, rev_id1=0x3, rev_id1=0x0
- <6>[ 0.722081 / 01-01 00:00:00.709][4] D - 11041 - boot_log_ddr_info, Delta
- <6>[ 0.722111 / 01-01 00:00:00.709][4] B - 715225 - do ddr sanity test, Start
- <6>[ 0.722142 / 01-01 00:00:00.709][4] D - 61 - do ddr sanity test, Delta
- <6>[ 0.722171 / 01-01 00:00:00.709][4] B - 721721 - do_ddr_training, Start
- <6>[ 0.722200 / 01-01 00:00:00.709][4] D - 8326 - do_ddr_training, Delta
- <6>[ 0.722226 / 01-01 00:00:00.709][4] B - 734470 - clock_init, Start
- <6>[ 0.722253 / 01-01 00:00:00.709][4] D - 183 - clock_init, Delta
- <6>[ 0.722283 / 01-01 00:00:00.709][4] B - 1820697 - device will be power off
- <6>[ 0.722309 / 01-01 00:00:00.709][4] B - 1823320 - Image Load, Start
- <6>[ 0.722346 / 01-01 00:00:00.709][4] D - 30 - APDP Image Loaded, Delta - (0 Bytes)
- <6>[ 0.722372 / 01-01 00:00:00.709][4] B - 1826675 - Image Load, Start
- <6>[ 0.722410 / 01-01 00:00:00.709][4] D - 12353 - QHEE Image Loaded, Delta - (89152 Bytes)
- <6>[ 0.722436 / 01-01 00:00:00.709][4] B - 1839058 - Image Load, Start
- <6>[ 0.722475 / 01-01 00:00:00.709][4] D - 55876 - QSEE Image Loaded, Delta - (550752 Bytes)
- <6>[ 0.722503 / 01-01 00:00:00.709][4] B - 1894965 - Qsee Execution, Start
- <6>[ 0.722531 / 01-01 00:00:00.709][4] D - 98911 - Qsee Execution, Delta
- <6>[ 0.722552 / 01-01 00:00:00.709][4] B - 1996072 - usb: SDP
- <6>[ 0.722579 / 01-01 00:00:00.709][4] B - 2012481 - Image Load, Start
- <6>[ 0.722619 / 01-01 00:00:00.709][4] D - 33398 - RPM Image Loaded, Delta - (186056 Bytes)
- <6>[ 0.722651 / 01-01 00:00:00.709][4] B - 2046153 - Signal PBL to Jump to RPM FW
- <6>[ 0.722678 / 01-01 00:00:00.709][4] B - 2048898 - Image Load, Start
- <6>[ 0.722714 / 01-01 00:00:00.709][4] D - 2745 - WDT Image Loaded, Delta - (0 Bytes)
- <6>[ 0.722743 / 01-01 00:00:00.709][4] B - 2057072 - read_usb_cable_type, s
- <6>[ 0.722777 / 01-01 00:00:00.709][4] B - 2141100 - boot_power_longkey_check, start
- <6>[ 0.722805 / 01-01 00:00:00.709][4] B - 2141130 - Restart cause restart
- <6>[ 0.722836 / 01-01 00:00:00.709][4] D - 1220 - boot_power_longkey, Delta
- <6>[ 0.722861 / 01-01 00:00:00.709][4] B - 2146925 - revision = 11
- <6>[ 0.722898 / 01-01 00:00:00.709][4] B - 2348866 - max17050 : charger_pres=1 batt_id=187
- <6>[ 0.722947 / 01-01 00:00:00.709][4] B - 2349567 - max17050:[CMP]vcell=3890 ocv=3880 tol=80 recal=10 creset=0
- <6>[ 0.722977 / 01-01 00:00:00.709][4] B - 2353959 - BootTempCheck():temp 37
- <6>[ 0.723003 / 01-01 00:00:00.709][4] B - 2357497 - Image Load, Start
- <6>[ 0.723043 / 01-01 00:00:00.709][4] D - 88633 - APPSBL Image Loaded, Delta - (908888 Bytes)
- <6>[ 0.723077 / 01-01 00:00:00.709][4] B - 2446161 - sbl1_efs_handle_cookies, Start
- <6>[ 0.723110 / 01-01 00:00:00.709][4] D - 488 - sbl1_efs_handle_cookies, Delta
- <6>[ 0.723139 / 01-01 00:00:00.709][4] B - 2453450 - RPM sync cookie updated
- <6>[ 0.723162 / 01-01 00:00:00.709][4] B - 2457049 - SBL1, End
- <6>[ 0.723184 / 01-01 00:00:00.709][4] D - 1980060 - SBL1, Delta
- <6>[ 0.723225 / 01-01 00:00:00.709][4] S - Flash Throughput, 13000 KB/s (1772356 Bytes, 127450 us)
- <6>[ 0.723262 / 01-01 00:00:00.709][4] [60] Waiting for the RPM to populate smd channel table
- <6>[ 0.723288 / 01-01 00:00:00.709][4] [60] restart_reason = 0x77665501
- <6>[ 0.723321 / 01-01 00:00:00.709][4] [60] lge_panel_config_pre_init : funtion called
- <6>[ 0.723348 / 01-01 00:00:00.709][4] [60] Not able to search the panel:
- <6>[ 0.723377 / 01-01 00:00:00.709][4] [60] ## LGD_LG4945_QHD_DUALDSI_CMD_PANEL
- <6>[ 0.723413 / 01-01 00:00:00.709][4] [60] init_panel_data LGD_LG4945_QHD_DUALDSI_CMD_PANEL
- <6>[ 0.723443 / 01-01 00:00:00.709][4] [110] target_dsv_ctrl: DSV_VENDOR_ID = 3
- <6>[ 0.723478 / 01-01 00:00:00.709][4] [160] dsi_pll_20nm_enable_seq: DSI PLL lock Success
- <6>[ 0.723508 / 01-01 00:00:00.709][4] [180] hallic_get_status : hall ic disabled
- <6>[ 0.723549 / 01-01 00:00:00.709][4] [180] display_lge_image_on_screen : do not use hall ic (pplus)
- <6>[ 0.723579 / 01-01 00:00:00.709][4] [180] pm8x41_get_is_cold_boot: Warm boot
- <6>[ 0.723617 / 01-01 00:00:00.709][4] [180] display_lge_image_on_screen: chargerlogo mode check
- <6>[ 0.723666 / 01-01 00:00:00.709][4] [180] display_lge_image_on_screen: cold_boot=0, pon1=160, key=0, cable_type=8
- <6>[ 0.723685 / 01-01 00:00:00.709][4] [240] lglogo_image.
- <6>[ 0.723708 / 01-01 00:00:00.709][4] [240] Config MIPI_CMD_PANEL.
- <6>[ 0.723737 / 01-01 00:00:00.709][4] [270] [SIC] panel version [0x21830038]
- <6>[ 0.723760 / 01-01 00:00:00.709][4] [270] [SIC] rev 3[0x30000]
- <6>[ 0.723790 / 01-01 00:00:00.709][4] [270] [SIC] vpnl(ldo22) voltage = 3300000
- <6>[ 0.723818 / 01-01 00:00:00.709][4] [270] [SIC] change register value[0x0F]
- <6>[ 0.723847 / 01-01 00:00:00.709][4] [270] [SIC] change register value[0x88]
- <6>[ 0.723876 / 01-01 00:00:00.709][4] [270] [SIC] change register value[0x04]
- <6>[ 0.723904 / 01-01 00:00:00.709][4] [270] [SIC] change register value[0x0A]
- <6>[ 0.723933 / 01-01 00:00:00.709][4] [270] [SIC] change register value[0x8C]
- <6>[ 0.723956 / 01-01 00:00:00.709][4] [360] Turn on MIPI_CMD_PANEL.
- <6>[ 0.723974 / 01-01 00:00:00.709][4] [380] PIF_DETECT:8
- <6>[ 0.723994 / 01-01 00:00:00.709][4] [400] LM3697_write_reg
- <6>[ 0.724014 / 01-01 00:00:00.709][4] [400] LM3697_write_reg
- <6>[ 0.724034 / 01-01 00:00:00.709][4] [400] LM3697_write_reg
- <6>[ 0.724054 / 01-01 00:00:00.709][4] [400] LM3697_write_reg
- <6>[ 0.724074 / 01-01 00:00:00.709][4] [400] LM3697_write_reg
- <6>[ 0.724095 / 01-01 00:00:00.709][4] [400] LM3697_write_reg
- <6>[ 0.724114 / 01-01 00:00:00.709][4] [400] LM3697_write_reg
- <6>[ 0.724140 / 01-01 00:00:00.709][4] [400] LM3697 read reg, level = 46
- <6>[ 0.724161 / 01-01 00:00:00.709][4] [400] 0 : ftm_get_item.
- <6>[ 0.724193 / 01-01 00:00:00.709][4] [400] BKcom.lge.systemui.theme.white : color.
- <6>[ 0.724211 / 01-01 00:00:00.709][4] [400] BK : color.
- <6>[ 0.724242 / 01-01 00:00:00.709][4] [410] target_home_key: should be implemented
- <6>[ 0.724291 / 01-01 00:00:00.709][4] [410] selectmode_get_current_key_info: vol_up=0, vol_down=0, power=0, home=0
- <6>[ 0.724335 / 01-01 00:00:00.709][4] [410] selectmode_check_usb_cable: with usb cable. not factory cable
- <6>[ 0.724372 / 01-01 00:00:00.709][4] [410] target_selectmode_init: selectmode_get_mode()=0
- <6>[ 0.724388 / 01-01 00:00:00.709][4] [410] SM_NONE
- <6>[ 0.724409 / 01-01 00:00:00.709][4] [410] webdload status:0
- <6>[ 0.724430 / 01-01 00:00:00.709][4] [410] webdload status:0
- <6>[ 0.724472 / 01-01 00:00:00.709][4] [410] bootcmd_add_pair: value changed from to rev_10 at lge.rev
- <6>[ 0.724518 / 01-01 00:00:00.709][4] [410] bootcmd_add_pair: value changed from to SW3800_VC0 at lge.battid
- <6>[ 0.724560 / 01-01 00:00:00.709][4] [410] bootmode_set_ddr_info: DDR Size info 4160749568 from smem
- <6>[ 0.724600 / 01-01 00:00:00.709][4] [410] bootmode_set_ddr_info: DDR MR info 0x1f000306 from smem
- <6>[ 0.724637 / 01-01 00:00:00.709][4] [420] [CCAudit] Start-up BOOT MODE = Reboot_by_PowerKey
- <6>[ 0.724689 / 01-01 00:00:00.709][4] [420] bootcmd_add_pair: value changed from to Reboot_by_PowerKey at lge.bootreason
- <6>[ 0.724710 / 01-01 00:00:00.709][4] [420] MSM8992 ver : 0x1
- <6>[ 0.724727 / 01-01 00:00:00.709][4] [420] get_qem = 0
- <6>[ 0.724744 / 01-01 00:00:00.709][4] [430] get_qem = 0
- <6>[ 0.724786 / 01-01 00:00:00.709][4] [430] bootcmd_add_pair: value changed from to 0-5 at boot_cpus
- <6>[ 0.724804 / 01-01 00:00:00.709][4] [430] dic_rev_id=3
- <6>[ 0.724829 / 01-01 00:00:00.709][4] [430] [LAF] boot_into_laf = 0
- <6>[ 0.724860 / 01-01 00:00:00.709][4] [430] Unable to locate /bootselect partition
- <6>[ 0.724889 / 01-01 00:00:00.709][4] [430] [KSwitch] check kill switch feature
- <6>[ 0.724930 / 01-01 00:00:00.709][4] [430] [KSwitch] check done (do nothing): valid=true, flasg=0x0
- <6>[ 0.724952 / 01-01 00:00:00.709][4] [440] cc mode disabled~!!!
- <6>[ 0.724991 / 01-01 00:00:00.709][4] [440] bootcmd_add_pair: value changed from to 0 at cc_mode
- <6>[ 0.725016 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable in
- <6>[ 0.725037 / 01-01 00:00:00.709][4] [FOTA] : _ReadGPTHeader
- <6>[ 0.725058 / 01-01 00:00:00.709][4] [FOTA] : _ReadGPTEntry
- <6>[ 0.725100 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.725137 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 0, tz, 6180000, 100000
- <6>[ 0.725179 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.725222 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.725259 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 1, rpm, 6380000, 80000
- <6>[ 0.725301 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.725343 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.725381 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 2, modem, 800000, 5600000
- <6>[ 0.725424 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.725466 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.725505 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 3, sbl1, 6080000, 100000
- <6>[ 0.725548 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.725591 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.725627 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 4, sdi, 6280000, 80000
- <6>[ 0.725670 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.725712 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.725749 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 5, hyp, 6300000, 80000
- <6>[ 0.725792 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.725834 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.725872 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 6, pmic, 6000000, 80000
- <6>[ 0.725916 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.725958 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.726001 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 7, raw_resources, 16800000, 400000
- <6>[ 0.726045 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.726088 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.726126 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 8, aboot, 6400000, 200000
- <6>[ 0.726168 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.726211 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.726250 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 9, boot, e800000, 2800000
- <6>[ 0.726293 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.726335 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.726377 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 10, recovery, 11000000, 2800000
- <6>[ 0.726420 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.726462 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.726501 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 11, laf, b800000, 3000000
- <6>[ 0.726543 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.726585 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.726626 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 12, factory, 17000000, 2e00000
- <6>[ 0.726668 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.726710 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.726749 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 16, fota, 1a000000, a00000
- <6>[ 0.726792 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.726835 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.726875 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 17, pmicbak, 6700000, 80000
- <6>[ 0.726917 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.726960 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.727000 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 18, tzbak, 6800000, 100000
- <6>[ 0.727042 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.727084 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.727124 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 19, rpmbak, 6900000, 80000
- <6>[ 0.727166 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.727209 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.727249 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 20, sbl1bak, 6600000, 100000
- <6>[ 0.727291 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.727333 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.727372 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 21, hypbak, 6780000, 80000
- <6>[ 0.727415 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.727457 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.727496 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 22, sdibak, 6b80000, 80000
- <6>[ 0.727540 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.727582 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.727627 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 23, raw_resourcesbak, 16c00000, 400000
- <6>[ 0.727670 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.727712 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.727753 / 01-01 00:00:00.709][4] [FOTA] : _SetUAPartitionTable : 24, abootbak, 6980000, 200000
- <6>[ 0.727795 / 01-01 00:00:00.709][4] [FOTA] : --------------------------------------------------------
- <6>[ 0.727825 / 01-01 00:00:00.709][4] [FOTA] : _Initialize : 6a400000, 6a460000
- <6>[ 0.727867 / 01-01 00:00:00.709][4] [FOTA] : IStoragePart_GetPhysicalAddress : uiLogical - 6a400000
- <6>[ 0.727908 / 01-01 00:00:00.709][4] [FOTA] : IStoragePart_GetPhysicalAddress : uiLogical - 6a440000
- <6>[ 0.727926 / 01-01 00:00:00.709][4] [450] get_qem = 0
- <6>[ 0.727947 / 01-01 00:00:00.709][4] [450] Enter normal mode
- <6>[ 0.727971 / 01-01 00:00:00.709][4] [450] boot from boot partition
- <6>[ 0.727996 / 01-01 00:00:00.709][4] [450] xboot offset : 0x4A200000
- <6>[ 0.728034 / 01-01 00:00:00.709][4] [450] use_signed_kernel=0, is_unlocked=1, is_tampered=0.
- <6>[ 0.728064 / 01-01 00:00:00.709][4] [450] Loading boot image (28061696): start
- <6>[ 0.728094 / 01-01 00:00:00.709][4] [550] Loading boot image (28061696): done
- <6>[ 0.728125 / 01-01 00:00:00.709][4] --------------------------------------------
- <6>[ 0.728133 / 01-01 00:00:00.709][4]
- <6>[ 0.728164 / 01-01 00:00:00.709][4] Bootloader STATE : Bootloader UnLock!!
- <6>[ 0.728172 / 01-01 00:00:00.709][4]
- <6>[ 0.728203 / 01-01 00:00:00.709][4] --------------------------------------------
- <6>[ 0.728235 / 01-01 00:00:00.709][4] [820] DTB Total entry: 10, DTB version: 2
- <6>[ 0.728295 / 01-01 00:00:00.709][4] [820] Using DTB entry 0x000000fb/00000000/0x00000b65/0 for device 0x000000fb/00010000/0x00000b65/0
- <6>[ 0.728346 / 01-01 00:00:00.709][4] [820] Using pmic info 0x20009/0x2000a/0x0/0x0 for device 0x20009/0x2000a/0x0/0x0
- <6>[ 0.728372 / 01-01 00:00:00.709][4] [820] ksut_tmus_msm8992 is loaded
- <6>[ 0.728391 / 01-01 00:00:00.709][4] [830] No unlock key!
- <6>[ 0.728430 / 01-01 00:00:00.709][4] [830] [CCAudit] Enter the boot_linux for kernel startup,,,
- <6>[ 0.728454 / 01-01 00:00:00.709][4] [830] bootcmd: lge.rev=rev_10
- <6>[ 0.728481 / 01-01 00:00:00.709][4] [830] bootcmd: lge.battid=SW3800_VC0
- <6>[ 0.728515 / 01-01 00:00:00.709][4] [830] bootcmd: lge.bootreason=Reboot_by_PowerKey
- <6>[ 0.728536 / 01-01 00:00:00.709][4] [830] bootcmd: maxcpus
- <6>[ 0.728560 / 01-01 00:00:00.709][4] [830] bootcmd: boot_cpus=0-5
- <6>[ 0.728579 / 01-01 00:00:00.709][4] [830] bootcmd: kswitch
- <6>[ 0.728601 / 01-01 00:00:00.709][4] [830] bootcmd: cc_mode=0
- <6>[ 0.728627 / 01-01 00:00:00.709][4] [830] bootcmd: lge.device_color=BK
- <6>[ 0.728662 / 01-01 00:00:00.709][4] [830] bootcmd: androidboot.bl_unlock_complete=true
- <6>[ 0.728725 / 01-01 00:00:00.719][4] [830] bootcmd: androidboot.dlcomplete=0
- <6>[ 0.728744 / 01-01 00:00:00.719][4] [830] bootcmd: gpt
- <6>[ 0.728770 / 01-01 00:00:00.719][4] [830] bootcmd: model.name=LG-H901
- <6>[ 0.728796 / 01-01 00:00:00.719][4] [830] bootcmd: bootcable.type=400MA
- <6>[ 0.728828 / 01-01 00:00:00.719][4] [830] bootcmd: androidboot.ddr_size=4160749568
- <6>[ 0.728861 / 01-01 00:00:00.719][4] [830] bootcmd: androidboot.ddr_info=0x1f000306
- <6>[ 0.728888 / 01-01 00:00:00.719][4] [830] bootcmd: fakebattery=disable
- <6>[ 0.728920 / 01-01 00:00:00.719][4] [830] bootcmd: lge.bootreasoncode=0x77665501
- <6>[ 0.728943 / 01-01 00:00:00.719][4] [830] bootcmd: lge.hreset=off
- <6>[ 0.728967 / 01-01 00:00:00.719][4] [830] bootcmd: lge.dic_rev=3
- <6>[ 0.728994 / 01-01 00:00:00.719][4] [830] bootcmd: fips_allow_others=1
- <6>[ 0.729018 / 01-01 00:00:00.719][4] [830] bootcmd: fips_panic=0
- <6>[ 0.729037 / 01-01 00:00:00.719][4] [830] bootcmd: fips=0
- <6>[ 0.729068 / 01-01 00:00:00.719][4] [840] hallic_get_status : hall ic disabled
- <6>[ 0.729102 / 01-01 00:00:00.719][4] [840] update_cmdline : do not use hall ic (pplus)
- <6>[ 0.729132 / 01-01 00:00:00.719][4] [840] pm8x41_get_is_cold_boot: Warm boot
- <6>[ 0.729177 / 01-01 00:00:00.719][4] [840] target_pause_for_battery_charge : pon_reason is 160 cold_boot:0
- <6>[ 0.729200 / 01-01 00:00:00.719][4] [840] PON_PON_PBL_STATUS:0x80
- <6>[ 0.729223 / 01-01 00:00:00.719][4] [840] PON_PON_REASON1:0xa0
- <6>[ 0.729248 / 01-01 00:00:00.719][4] [840] PON_WARM_RESET_REASON1:0x2
- <6>[ 0.729274 / 01-01 00:00:00.719][4] [840] PON_WARM_RESET_REASON2:0x0
- <6>[ 0.729296 / 01-01 00:00:00.719][4] [840] PON_POFF_REASON1:0x0
- <6>[ 0.729319 / 01-01 00:00:00.719][4] [840] PON_POFF_REASON2:0x20
- <6>[ 0.729344 / 01-01 00:00:00.719][4] [840] PON_SOFT_RESET_REASON1:0x0
- <6>[ 0.729369 / 01-01 00:00:00.719][4] [840] PON_SOFT_RESET_REASON2:0x0
- <6>[ 0.729392 / 01-01 00:00:00.719][4] [840] TEMP_ALARM_STATUS1:0x80
- <6>[ 0.729420 / 01-01 00:00:00.719][4] [840] SMBCHG_USB_CHGPTH_INT_RT_STS:0x4
- <6>[ 0.729591 / 01-01 00:00:00.719][4] [840] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 boot_cpus=0-5 lge.rev=rev_10 lge.battid=SW3800_VC0 lge.bootreason=Reboot_by_PowerKey maxcpus boot_cpus=0-5 k[840] bootcmd_list_deinit : remove all bootcmd_arg
- <6>[ 0.729619 / 01-01 00:00:00.719][4] [840] Updating device tree: start
- <6>[ 0.729644 / 01-01 00:00:00.719][4] [860] Updating device tree: done
- <6>[ 0.729666 / 01-01 00:00:00.719][4] [860] Channel alloc freed
- <6>[ 0.729690 / 01-01 00:00:00.719][4] [870] Turn off MIPI_CMD_PANEL.
- <6>[ 0.729728 / 01-01 00:00:00.719][4] [870] Continuous splash enabled, keeping panel alive.
- <6>[ 0.729784 / 01-01 00:00:00.719][4] [870] booting linux @ 0x80000, ramdisk @ 0x2200000 (1240669), tags/device tree @ 0x2000000
- <6>[ 0.729811 / 01-01 00:00:00.719][4] [870] Jumping to kernel via monitor
- <6>[ 0.729820 / 01-01 00:00:00.719][4]
- <6>[ 0.729829 / 01-01 00:00:00.719][4] bootlog_probe: token (null)
- <6>[ 0.729836 / 01-01 00:00:00.719][4] -------------------------------------------------
- <4>[ 0.729850 / 01-01 00:00:00.719][4] Trying to free nonexistent resource <000000000ffc0000-000000000ffdffff>
- <6>[ 0.732357 / 01-01 00:00:00.719][4] [QFUSE]lge_qfprom_probe : qfprom init
- <3>[ 0.734050 / 01-01 00:00:00.719][4] sps: BAM device 0x00000000f9944000 is not registered yet.
- <6>[ 0.734070 / 01-01 00:00:00.719][4] sps:BAM 0x00000000f9944000 is registered.
- <6>[ 0.736402 / 01-01 00:00:00.719][4] f995e000.uart: ttyHS0 at MMIO 0xf995e000 (irq = 146) is a MSM HS UART
- <6>[ 0.739002 / 01-01 00:00:00.729][4] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
- <3>[ 0.739046 / 01-01 00:00:00.729][4] AXI: get_pdata(): Error: Client name not found
- <3>[ 0.739056 / 01-01 00:00:00.729][4] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
- <3>[ 0.739067 / 01-01 00:00:00.729][4] msm_serial_hsl_probe: Bus scaling is disabled
- <6>[ 0.739124 / 01-01 00:00:00.729][4] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
- <6>[ 0.739712 / 01-01 00:00:00.729][4] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
- <3>[ 0.739750 / 01-01 00:00:00.729][4] AXI: get_pdata(): Error: Client name not found
- <3>[ 0.739759 / 01-01 00:00:00.729][4] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
- <3>[ 0.739768 / 01-01 00:00:00.729][4] msm_serial_hsl_probe: Bus scaling is disabled
- <6>[ 0.739811 / 01-01 00:00:00.729][4] f9961000.serial: ttyHSL1 at MMIO 0xf9961000 (irq = 149) is a MSM
- <6>[ 0.740124 / 01-01 00:00:00.729][4] msm_serial_hsl_init: driver initialized
- <6>[ 0.743049 / 01-01 00:00:00.729][4] lge_bypass_init
- <6>[ 0.743095 / 01-01 00:00:00.729][4] lge_bypass_init: success
- <6>[ 0.743105 / 01-01 00:00:00.729][4] DM_APP: lge_dm_tty_init
- <6>[ 0.747671 / 01-01 00:00:00.729][4] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
- <6>[ 0.751561 / 01-01 00:00:00.739][4] brd: module loaded
- <6>[ 0.752700 / 01-01 00:00:00.739][4] loop: module loaded
- <3>[ 0.753112 / 01-01 00:00:00.739][4] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x800000
- <4>[ 0.753145 / 01-01 00:00:00.739][4] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
- <4>[ 0.753154 / 01-01 00:00:00.739][4] QSEECOM: qseecom_probe: Device does not support PFEQSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
- <6>[ 0.753179 / 01-01 00:00:00.739][4] QSEECOM: qseecom_probe: no-clock-support=0x1QSEECOM: qseecom_probe: secure app region addr=0x5a00000 size=0x1000000
- <6>[ 0.761606 / 01-01 00:00:00.749][4] IrRC: uei,reset-gpio: 915
- <4>[ 0.762304 / 01-01 00:00:00.749][4] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- <4>[ 0.762317 / 01-01 00:00:00.749][4] i2c-core: driver [tabla-i2c-core] using legacy resume method
- <4>[ 0.762373 / 01-01 00:00:00.749][4] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
- <4>[ 0.762382 / 01-01 00:00:00.749][4] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
- <6>[ 0.762438 / 01-01 00:00:00.749][4] p1_dsv_probe start
- <6>[ 0.763093 / 01-01 00:00:00.749][4] 907, platform_data.irq_gpio
- <6>[ 0.763103 / 01-01 00:00:00.749][4] 908, platform_data.en_gpio
- <6>[ 0.763112 / 01-01 00:00:00.749][4] 917, platform_data.wake_gpio
- <6>[ 0.818747 / 01-01 00:00:00.809][4] requesting IRQ 503
- <6>[ 0.818909 / 01-01 00:00:00.809][4] bcm2079x_probe, probing bcm2079x driver exited successfully
- <0>[ 0.818920 / 01-01 00:00:00.809][4] bus probe : 754 bcm2079x 55
- <6>[ 0.820500 / 01-01 00:00:00.809][4] SCSI Media Changer driver v0.25
- <4>[ 0.821469 / 01-01 00:00:00.809][4] spi_qsd f9966000.spi: using default bus_num -1
- <6>[ 0.825165 / 01-01 00:00:00.809][1] sps:BAM 0x00000000f9944000 (va:0xffffff8000820000) enabled: ver:0x17, number of pipes:24
- <4>[ 0.826347 / 01-01 00:00:00.809][1] spi_qsd f9925000.spi: using default bus_num -1
- <6>[ 0.826645 / 01-01 00:00:00.809][2] spi_master spi32765: will run message pump with realtime priority
- <3>[ 0.827673 / 01-01 00:00:00.809][2] sps: BAM device 0x00000000f9904000 is not registered yet.
- <6>[ 0.827701 / 01-01 00:00:00.819][4] sps:BAM 0x00000000f9904000 is registered.
- <6>[ 0.835217 / 01-01 00:00:00.819][4] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 0.835235 / 01-01 00:00:00.819][4] tun: (C) 1999-2004 Max Krasnyansky <<email omitted>>
- <6>[ 0.835336 / 01-01 00:00:00.819][4] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
- <6>[ 0.835346 / 01-01 00:00:00.819][4] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
- <6>[ 0.835406 / 01-01 00:00:00.819][4] PPP generic driver version 2.4.2
- <6>[ 0.835528 / 01-01 00:00:00.819][4] PPP BSD Compression module registered
- <6>[ 0.835540 / 01-01 00:00:00.819][4] PPP Deflate Compression module registered
- <6>[ 0.835571 / 01-01 00:00:00.819][4] PPP MPPE Compression module registered
- <6>[ 0.835582 / 01-01 00:00:00.819][4] NET: Registered protocol family 24
- <6>[ 0.835682 / 01-01 00:00:00.819][4] usbcore: registered new interface driver asix
- <6>[ 0.835730 / 01-01 00:00:00.819][4] usbcore: registered new interface driver ax88179_178a
- <6>[ 0.835757 / 01-01 00:00:00.819][4] usbcore: registered new interface driver cdc_ether
- <6>[ 0.835780 / 01-01 00:00:00.819][4] usbcore: registered new interface driver net1080
- <6>[ 0.835802 / 01-01 00:00:00.819][4] usbcore: registered new interface driver cdc_subset
- <6>[ 0.835945 / 01-01 00:00:00.819][4] usbcore: registered new interface driver zaurus
- <6>[ 0.836076 / 01-01 00:00:00.819][4] usbcore: registered new interface driver cdc_ncm
- <6>[ 0.836417 / 01-01 00:00:00.819][4] NET: Registered protocol family 27
- <6>[ 0.836753 / 01-01 00:00:00.819][4] msm_sharedmem: sharedmem_register_qmi: qmi init successful
- <6>[ 0.837884 / 01-01 00:00:00.819][4] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
- <6>[ 0.838596 / 01-01 00:00:00.819][4] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
- <6>[ 0.838875 / 01-01 00:00:00.829][4] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
- <6>[ 0.839088 / 01-01 00:00:00.829][4] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_sensor'
- <3>[ 0.841360 / 01-01 00:00:00.829][4] msm-usb-hsphy f92f8800.hsphy: set notify_set_hostmode
- <0>[ 0.885289 / 01-01 00:00:00.869][4] drv probe : 836 msm-dwc3 40
- <6>[ 0.885873 / 01-01 00:00:00.869][4] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 0.885886 / 01-01 00:00:00.869][4] ehci-pci: EHCI PCI platform driver
- <6>[ 0.885918 / 01-01 00:00:00.869][4] ehci-msm: Qualcomm On-Chip EHCI Host Controller
- <6>[ 0.886199 / 01-01 00:00:00.869][4] ehci-msm2: Qualcomm EHCI Host Controller
- <6>[ 0.886952 / 01-01 00:00:00.869][4] usbcore: registered new interface driver cdc_acm
- <6>[ 0.886961 / 01-01 00:00:00.869][4] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>[ 0.887015 / 01-01 00:00:00.869][4] usbcore: registered new interface driver ccid_bridge
- <6>[ 0.887086 / 01-01 00:00:00.869][4] ccid_bridge_init: success
- <6>[ 0.887120 / 01-01 00:00:00.869][4] usbcore: registered new interface driver usb-storage
- <6>[ 0.887143 / 01-01 00:00:00.869][4] usbcore: registered new interface driver ums-alauda
- <6>[ 0.887166 / 01-01 00:00:00.869][4] usbcore: registered new interface driver ums-cypress
- <6>[ 0.887187 / 01-01 00:00:00.869][4] usbcore: registered new interface driver ums-datafab
- <6>[ 0.887208 / 01-01 00:00:00.869][4] usbcore: registered new interface driver ums-freecom
- <6>[ 0.887230 / 01-01 00:00:00.869][4] usbcore: registered new interface driver ums-isd200
- <6>[ 0.887254 / 01-01 00:00:00.869][4] usbcore: registered new interface driver ums-jumpshot
- <6>[ 0.887277 / 01-01 00:00:00.869][4] usbcore: registered new interface driver ums-karma
- <6>[ 0.887301 / 01-01 00:00:00.869][4] usbcore: registered new interface driver ums-sddr09
- <6>[ 0.887324 / 01-01 00:00:00.869][4] usbcore: registered new interface driver ums-sddr55
- <6>[ 0.887346 / 01-01 00:00:00.869][4] usbcore: registered new interface driver ums-usbat
- <6>[ 0.887424 / 01-01 00:00:00.869][4] usbcore: registered new interface driver usbserial
- <6>[ 0.887449 / 01-01 00:00:00.869][4] usbcore: registered new interface driver qc_csvt
- <6>[ 0.887471 / 01-01 00:00:00.869][4] usbserial: USB Serial support registered for qc_csvt
- <6>[ 0.887495 / 01-01 00:00:00.869][4] usbcore: registered new interface driver usb_ehset_test
- <6>[ 0.887804 / 01-01 00:00:00.869][4] u_lgeusb init
- <6>[ 0.888812 / 01-01 00:00:00.879][4] mousedev: PS/2 mouse device common for all mice
- <6>[ 0.889357 / 01-01 00:00:00.879][4] usbcore: registered new interface driver xpad
- <6>[ 0.890596 / 01-01 00:00:00.879][4] [Touch] touch_spi_probe
- <6>[ 0.890596 / 01-01 00:00:00.879][4] , platform ptr = (null)
- <6>[ 0.890617 / 01-01 00:00:00.879][4] [Touch] platform device register
- <6>[ 0.890792 / 01-01 00:00:00.879][4] [Touch] start dev.of_node
- <6>[ 0.890892 / 01-01 00:00:00.879][4] [Touch] fw_image - 0:sic/pplus/L0L57P1_1_44.img
- <6>[ 0.890901 / 01-01 00:00:00.879][4] [Touch] fw_image - 1:sic/pplus/L0L57P1_1_35.img
- <6>[ 0.890911 / 01-01 00:00:00.879][4] [Touch] end dev.of_node
- <6>[ 0.890922 / 01-01 00:00:00.879][4] [Touch] touch_set_device, data:ffffffc0db09cc18
- <6>[ 0.890930 / 01-01 00:00:00.879][4] [Touch] touch_gpio_init - pin:899, name:touch_reset
- <6>[ 0.890947 / 01-01 00:00:00.879][4] [Touch] touch_gpio_direction_output - pin:899, value:0
- <6>[ 0.890959 / 01-01 00:00:00.879][4] [Touch] touch_gpio_init - pin:900, name:touch_int
- <6>[ 0.890970 / 01-01 00:00:00.879][4] [Touch] touch_gpio_direction_input - pin:900
- <6>[ 0.890980 / 01-01 00:00:00.879][4] [Touch] touch_gpio_init - pin:-2, name:touch_make_id
- <6>[ 0.890988 / 01-01 00:00:00.879][4] [Touch] touch_gpio_direction_input - pin:-2
- <6>[ 0.891023 / 01-01 00:00:00.879][4] [Touch] regulator "vdd" not exist
- <6>[ 0.891037 / 01-01 00:00:00.879][4] [Touch] regulator "vio" not exist
- <6>[ 0.891513 / 01-01 00:00:00.879][4] [Touch] pinctrl set active
- <6>[ 0.893316 / 01-01 00:00:00.879][4] [Touch] lg4945_power, off
- <6>[ 0.893330 / 01-01 00:00:00.879][4] [Touch] touch_gpio_direction_output - pin:899, value:0
- <6>[ 0.894362 / 01-01 00:00:00.879][4] [Touch] lg4945_power, on
- <6>[ 0.894372 / 01-01 00:00:00.879][4] [Touch] touch_gpio_direction_output - pin:899, value:1
- <6>[ 0.894486 / 01-01 00:00:00.879][4] [Touch] touch_init_input 1439-2719-255-15-15-1-10
- <6>[ 0.894582 / 01-01 00:00:00.879][4] input: touch_dev as /devices/virtual/input/input0
- <3>[ 0.894882 / 01-01 00:00:00.879][4] lcd_notifier_callback: TOUCH_EVENT_REGISTER_DONE received ndx: 0 [1]
- <3>[ 0.894896 / 01-01 00:00:00.879][4] lcd_notifier_callback: TOUCH_EVENT_REGISTER_DONE received ndx: 1 [1]
- <3>[ 0.894908 / 01-01 00:00:00.879][4] [Touch E] [lg4945_notify 1131] 3 is not supported
- <6>[ 0.895058 / 01-01 00:00:00.879][4] [Touch] watch_fontdata_attr_init font_buffer(64 KB) malloc
- <6>[ 0.895078 / 01-01 00:00:00.879][4] [Touch] hw_reset_delay : 90 ms
- <6>[ 0.895099 / 01-01 00:00:00.879][4] [Touch] platform device registered ...
- <6>[ 0.895637 / 01-01 00:00:00.879][4] [FINGERPRINT] [fpc_btp_get_of_pdata] enter
- <6>[ 0.895649 / 01-01 00:00:00.879][4] [FINGERPRINT] [fpc_btp_regulator_init] enter!!
- <6>[ 0.895957 / 01-01 00:00:00.879][4] [FINGERPRINT] [fpc_btp_regulator_set] power on!!
- <6>[ 0.895969 / 01-01 00:00:00.879][4] [FINGERPRINT] [fpc_btp_reset_init] enter
- <6>[ 0.895979 / 01-01 00:00:00.879][4] [FINGERPRINT] [fpc_btp_reset_init] Assign HW reset -> GPIO916
- <6>[ 0.895996 / 01-01 00:00:00.879][4] [FINGERPRINT] [fpc_btp_cs_init] enter
- <6>[ 0.896005 / 01-01 00:00:00.879][4] [FINGERPRINT] [fpc_btp_cs_init] Assign CS -> GPIO965
- <6>[ 0.896018 / 01-01 00:00:00.879][4] [FINGERPRINT] [fpc_btp_irq_init] enter
- <6>[ 0.896027 / 01-01 00:00:00.879][4] [FINGERPRINT] [fpc_btp_irq_init] Assign IRQ -> GPIO914
- <6>[ 0.899983 / 01-01 00:00:00.889][4] [FINGERPRINT] [fpc_btp_verify_hw_id] enter
- <6>[ 0.899995 / 01-01 00:00:00.889][4] [FINGERPRINT] [fpc_btp_get_hwid] enter
- <6>[ 0.900129 / 01-01 00:00:00.889][4] [FINGERPRINT] [fpc_btp_verify_hw_id] HWID: 0x111
- <6>[ 0.900902 / 01-01 00:00:00.889][4] input: fingerprint as /devices/virtual/input/lge_fingerprint
- <6>[ 0.900979 / 01-01 00:00:00.889][4] [FINGERPRINT] [fpc_btp_probe] done!!
- <6>[ 0.901254 / 01-01 00:00:00.889][4] qcom,qpnp-rtc qpnp-rtc-ffffffc0dc98cc00: rtc core: registered qpnp_rtc as rtc0
- <6>[ 0.901443 / 01-01 00:00:00.889][4] i2c /dev entries driver
- <6>[ 0.904952 / 01-01 00:00:00.889][4] platform fdc00000.qcom,vidc: Driver msm_vidc_v4l2 requests probe deferral
- <3>[ 0.911882 / 01-01 00:00:00.899][4] adp1660 i2c_add_driver success
- <3>[ 0.912879 / 01-01 00:00:00.899][4] msm_flash_lm3642_init entry
- <3>[ 0.913776 / 01-01 00:00:00.899][4] msm_eeprom_platform_probe qcom,eeprom-name imx234_eeprom, rc 0
- <6>[ 0.922724 / 01-01 00:00:00.909][4] msm_cci_init:879: hw_version = 0x10020001
- <3>[ 0.922788 / 01-01 00:00:00.909][4] msm_eeprom_platform_probe: lge_get_board_revno = 11
- <6>[ 0.978709 / 01-01 00:00:00.969][0] [Touch] touch_ic_init Start
- <6>[ 0.978734 / 01-01 00:00:00.969][0] [Touch] lg4945_init: charger_state = 0x00
- <6>[ 0.978941 / 01-01 00:00:00.969][0] sps:BAM 0x00000000f9904000 (va:0xffffff8000a00000) enabled: ver:0x17, number of pipes:24
- <6>[ 0.979415 / 01-01 00:00:00.969][1] [Touch] version : v1.44, chip : 6, protocol : 3
- <6>[ 0.979415 / 01-01 00:00:00.969][1] [Touch] revision: 3
- <6>[ 0.979415 / 01-01 00:00:00.969][1] [Touch] product id : L0L57P1
- <6>[ 0.979415 / 01-01 00:00:00.969][1] [Touch] flash boot : idle, done, crc : ok
- <6>[ 0.980211 / 01-01 00:00:00.969][1] [Touch] resume ts->lpwg.screen
- <6>[ 0.980405 / 01-01 00:00:00.969][1] [Touch] lg4945_lpwg_control mode = 0
- <6>[ 0.980612 / 01-01 00:00:00.969][1] [Touch] swipe disable
- <6>[ 0.980623 / 01-01 00:00:00.969][1] [Touch] lg4945_tc_driving = 3
- <6>[ 0.980824 / 01-01 00:00:00.969][1] [Touch] IC Mode = 3
- <6>[ 1.008709 / 01-01 00:00:00.999][1] [Touch] watch_init
- <6>[ 1.010395 / 01-01 00:00:00.999][1] [Touch] ext_watch_check_font_download:start
- <6>[ 1.010406 / 01-01 00:00:00.999][1] [Touch] ext_watch_check_font_download : font data is not
- <6>[ 1.010417 / 01-01 00:00:00.999][1] [Touch] skip font download, ret:-12
- <6>[ 1.010460 / 01-01 00:00:00.999][1] [Touch] get fwpath from def_fwpath : sic/pplus/L0L57P1_1_44.img
- <6>[ 1.010473 / 01-01 00:00:00.999][1] [Touch] fwpath[sic/pplus/L0L57P1_1_44.img]
- <6>[ 1.010488 / 01-01 00:00:00.999][1] [Touch] fw size:69632, data: ffffffc000eec678
- <6>[ 1.010502 / 01-01 00:00:00.999][1] [Touch] bin-ver: 1.44 (L0L57P1), dev-ver: 1.44 -> update: 0, force_fwup: 0
- <3>[ 1.010516 / 01-01 00:00:00.999][1] [Touch E] [touch_upgrade_work_func 270] failed to upgrade (ret: -1)
- <6>[ 1.036497 / 01-01 00:00:01.019][2] msm_eeprom_platform_probe: imx234_eeprom : eeprom data checksum success!
- <3>[ 1.036510 / 01-01 00:00:01.019][2] msm_eeprom_platform_probe:main_sensor_id 0x1
- <3>[ 1.043104 / 01-01 00:00:01.029][2] msm_eeprom_platform_probe X
- <0>[ 1.043119 / 01-01 00:00:01.029][2] drv probe : 905 qcom,eeprom 129
- <3>[ 1.043907 / 01-01 00:00:01.029][2] msm_eeprom_i2c_probe qcom,eeprom-name ov5670_eeprom, rc 0
- <3>[ 1.051069 / 01-01 00:00:01.039][2] i2c-msm-v2 f9924000.i2c: msm_bus_scale_register_client(mstr-id:86):0x11 (ok)
- <6>[ 1.177329 / 01-01 00:00:01.159][2] msm_eeprom_i2c_probe: ov5670_eeprom : eeprom data checksum success!
- <0>[ 1.184044 / 01-01 00:00:01.169][2] bus probe : 1035 msm_eeprom 140
- <3>[ 1.184121 / 01-01 00:00:01.169][2] msm_ois_init_module:1035 Enter
- <3>[ 1.185176 / 01-01 00:00:01.169][2] msm_ois_platform_probe:894 Enter
- <3>[ 1.185190 / 01-01 00:00:01.169][2] msm_ois_platform_probe:909 cell-index 0, rc 0
- <3>[ 1.185203 / 01-01 00:00:01.169][2] msm_ois_platform_probe:918 qcom,cci-master 0, rc 0
- <3>[ 1.185293 / 01-01 00:00:01.169][2] msm_ois_platform_probe:994 Exit
- <3>[ 1.186960 / 01-01 00:00:01.169][2] imx234_init_module:HW rev = 11
- <3>[ 1.187947 / 01-01 00:00:01.169][2] imx234_platform_probe: E
- <3>[ 1.188052 / 01-01 00:00:01.169][2] msm_sensor_get_sub_module_index qcom,tcs cell index 997, rc 0
- <3>[ 1.188066 / 01-01 00:00:01.169][2] msm_sensor_get_sub_module_index:325 src_node NULL
- <3>[ 1.188609 / 01-01 00:00:01.169][2] msm_sensor_platform_probe sensor name imx234
- <6>[ 1.223514 / 01-01 00:00:01.209][0] msm_cci_init:879: hw_version = 0x10020001
- <3>[ 1.223731 / 01-01 00:00:01.209][0] msm_sensor_match_id: read id: 0x240 expected id 0x240:
- <3>[ 1.223744 / 01-01 00:00:01.209][0] msm_sensor_power_up for imx234
- <3>[ 1.223755 / 01-01 00:00:01.209][0] msm_sensor_platform_probe imx234 probe succeeded
- <3>[ 1.224004 / 01-01 00:00:01.209][0] msm_sensor_power_down for imx234
- <3>[ 1.244973 / 01-01 00:00:01.229][0] imx234_platform_probe: X
- <0>[ 1.244988 / 01-01 00:00:01.229][0] drv probe : 1179 qcom,imx234 57
- <6>[ 1.245029 / 01-01 00:00:01.229][0] ov5670w_init_module:132
- <3>[ 1.246538 / 01-01 00:00:01.229][0] msm_sensor_get_sub_module_index:309 src_node NULL
- <3>[ 1.246553 / 01-01 00:00:01.229][0] msm_sensor_get_sub_module_index:325 src_node NULL
- <3>[ 1.246778 / 01-01 00:00:01.229][0] msm_sensor_platform_probe sensor name ov5670w
- <6>[ 1.253705 / 01-01 00:00:01.239][0] msm_cci_init:879: hw_version = 0x10020001
- <3>[ 1.253921 / 01-01 00:00:01.239][0] msm_sensor_match_id: read id: 0x5670 expected id 0x5670:
- <3>[ 1.253933 / 01-01 00:00:01.239][0] msm_sensor_power_up for ov5670w
- <3>[ 1.253944 / 01-01 00:00:01.239][0] msm_sensor_platform_probe ov5670w probe succeeded
- <3>[ 1.254188 / 01-01 00:00:01.239][0] msm_sensor_power_down for ov5670w
- <6>[ 1.260544 / 01-01 00:00:01.249][0] ov5670_init_module:130
- <3>[ 1.262065 / 01-01 00:00:01.249][0] msm_sensor_get_sub_module_index:309 src_node NULL
- <3>[ 1.262082 / 01-01 00:00:01.249][0] msm_sensor_get_sub_module_index:325 src_node NULL
- <3>[ 1.269447 / 01-01 00:00:01.259][0] msm_sensor_match_id: read id: 0x5670 expected id 0x5670:
- <3>[ 1.269463 / 01-01 00:00:01.259][0] msm_sensor_power_up for ov5670
- <3>[ 1.269475 / 01-01 00:00:01.259][0] msm_sensor_i2c_probe ov5670 probe succeeded
- <3>[ 1.269714 / 01-01 00:00:01.259][0] msm_sensor_power_down for ov5670
- <6>[ 1.276721 / 01-01 00:00:01.259][0] MSM-CPP msm_cpp_get_clk_info:3454 clk_rate[0] = -1
- <6>[ 1.276736 / 01-01 00:00:01.259][0] MSM-CPP msm_cpp_get_clk_info:3454 clk_rate[1] = 465000000
- <6>[ 1.276746 / 01-01 00:00:01.259][0] MSM-CPP msm_cpp_get_clk_info:3454 clk_rate[2] = -1
- <6>[ 1.276758 / 01-01 00:00:01.259][0] MSM-CPP msm_cpp_get_clk_info:3454 clk_rate[3] = -1
- <6>[ 1.276769 / 01-01 00:00:01.259][0] MSM-CPP msm_cpp_get_clk_info:3454 clk_rate[4] = 465000000
- <6>[ 1.276780 / 01-01 00:00:01.259][0] MSM-CPP msm_cpp_get_clk_info:3454 clk_rate[5] = -1
- <6>[ 1.276791 / 01-01 00:00:01.259][0] MSM-CPP msm_cpp_get_clk_info:3454 clk_rate[6] = -1
- <3>[ 1.276804 / 01-01 00:00:01.259][0] MSM-CPP cpp_probe:3576 Bus master 0
- <6>[ 1.290285 / 01-01 00:00:01.279][1] MSM-CPP cpp_init_hardware:1102 CPP HW Version: 0x50010000
- <3>[ 1.290302 / 01-01 00:00:01.279][1] MSM-CPP cpp_init_hardware:1123 stream_cnt:0
- <3>[ 1.294775 / 01-01 00:00:01.279][0] __msm_jpeg_init:1525] Jpeg Device id 0
- <3>[ 1.294982 / 01-01 00:00:01.279][0] __msm_jpeg_init:1525] Jpeg Device id 3<6>[ 1.295891 / 01-01 00:00:01.279][0] usbcore: registered new interface driver uvcvideo
- <6>[ 1.295904 / 01-01 00:00:01.279][0] USB Video Class driver (1.1.1)
- <6>[ 1.296280 / 01-01 00:00:01.279][0] smb1351_parallel_charger_probe: smb1351 parallel successfully probed.
- <6>[ 1.296645 / 01-01 00:00:01.279][0] lge_battery_id lge,battery-id.89: LGE Battery ID Checker started
- <6>[ 1.296676 / 01-01 00:00:01.279][0] Battery was read in sbl is = 187
- <6>[ 1.297209 / 01-01 00:00:01.279][0] FG: fg_of_init: Using external sense
- <6>[ 1.298870 / 01-01 00:00:01.289][0] FG: fg_probe: probe success
- <6>[ 1.298892 / 01-01 00:00:01.289][0] FG: update_iterm: current = -400, converted_raw = f5c3, data = c3 f5
- <6>[ 1.299021 / 01-01 00:00:01.289][0] FG: update_cutoff_voltage: voltage = 3200, converted_raw = 51eb, data = eb 51
- <6>[ 1.299139 / 01-01 00:00:01.289][0] FG: update_irq_volt_empty: voltage = 2500, converted_raw = 0000
- <6>[ 1.299544 / 01-01 00:00:01.289][0] FG: fg_set_resume_soc: setting resume-soc to f2
- <6>[ 1.300528 / 01-01 00:00:01.289][0] FG: bcl_trim_workaround: workaround not applied, tp_rev = 18
- <6>[ 1.301310 / 01-01 00:00:01.289][0] FG: fg_8994_hw_init: set default value to esr filter
- <3>[ 1.301684 / 01-01 00:00:01.289][0] qpnp-smbcharger qpnp-smbcharger-ffffffc0dc98f000: node /soc/qcom,spmi@fc4c0000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
- <6>[ 1.301715 / 01-01 00:00:01.289][0] SMBCHG: smb_parse_dt: parallel usb thr: 1000, 9v thr: 1000
- <6>[ 1.301836 / 01-01 00:00:01.289][0] smbcharger_charger_otg: no parameters
- <6>[ 1.301961 / 01-01 00:00:01.289][0] smbcharger_external_otg: no parameters
- <6>[ 1.302110 / 01-01 00:00:01.289][0] smbcharger_external_otg: supplied by pmi8994_boost_5v
- <6>[ 1.302234 / 01-01 00:00:01.289][0] SMBCHG: smbchg_hw_init: Charger Revision DIG: 2.0; ANA: 1.1
- <6>[ 1.302654 / 01-01 00:00:01.289][0] SMBCHG: smbchg_hw_init: set vfloat to 4400
- <6>[ 1.302702 / 01-01 00:00:01.289][0] SMBCHG: smbchg_hw_init: set tcc (100) to 0x02
- <6>[ 1.328709 / 01-01 00:00:01.319][1] SMBCHG: smbchg_primary_usb_en: usb enabled, susp = 00, en? = 1, reason = 01
- <6>[ 1.328724 / 01-01 00:00:01.319][1] SMBCHG: smbchg_dc_en: dc enabled, susp = 00, en? = 1, reason = 01
- <6>[ 1.328807 / 01-01 00:00:01.319][1] SMBCHG: smbchg_set_dc_current_max: dc current set to 700 mA
- <6>[ 1.328890 / 01-01 00:00:01.319][1] SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 1600, set to 1600
- <6>[ 1.329137 / 01-01 00:00:01.319][1] SMBCHG: determine_initial_status: chg_chgr_sts : 0x85
- <6>[ 1.329158 / 01-01 00:00:01.319][1] SMBCHG: determine_initial_status: chg_rt_sts : 0x10
- <6>[ 1.329177 / 01-01 00:00:01.319][1] SMBCHG: determine_initial_status: batt_rt_sts : 0x00
- <6>[ 1.329198 / 01-01 00:00:01.319][1] SMBCHG: batt_pres_handler: triggered: 0x00
- <6>[ 1.329332 / 01-01 00:00:01.319][1] SMBCHG: batt_hot_handler: triggered: 0x00
- <6>[ 1.329343 / 01-01 00:00:01.319][1] SMBCHG: batt_warm_handler: triggered: 0x00
- <6>[ 1.329353 / 01-01 00:00:01.319][1] SMBCHG: batt_cool_handler: triggered: 0x00
- <6>[ 1.329364 / 01-01 00:00:01.319][1] SMBCHG: batt_cold_handler: triggered: 0x00
- <6>[ 1.329460 / 01-01 00:00:01.319][1] SMBCHG: chg_term_handler: triggered: 0x10
- <6>[ 1.329565 / 01-01 00:00:01.319][1] SMBCHG: chg_term_handler: enable_irq_wake failed[-22]
- <6>[ 1.329588 / 01-01 00:00:01.319][1] SMBCHG: usbid_change_handler: triggered
- <6>[ 1.358715 / 01-01 00:00:01.349][1] SMBCHG: is_otg_present: USBID = 0x0fff, too high to be ground
- <6>[ 1.358894 / 01-01 00:00:01.349][1] SMBCHG: src_detect_handler: chip->usb_present = 0 usb_present = 1 src_detect = 1
- <6>[ 1.358907 / 01-01 00:00:01.349][1] SMBCHG: handle_usb_insertion: triggered
- <6>[ 1.358931 / 01-01 00:00:01.349][1] SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
- <3>[ 1.359441 / 01-01 00:00:01.349][1] i2c-msm-v2 f9923000.i2c: msm_bus_scale_register_client(mstr-id:86):0x12 (ok)
- <6>[ 1.359972 / 01-01 00:00:01.349][1] smb1351_float_voltage_set: set float voltage = 4450
- <6>[ 1.361023 / 01-01 00:00:01.349][1] smb1351_fastchg_current_set: fastchg limit=1000 setting 00
- <6>[ 1.362599 / 01-01 00:00:01.349][1] SMBCHG: smbchg_update_bmd_work: smbchg_update_bmd_work = 1
- <6>[ 1.362672 / 01-01 00:00:01.349][1] SMBCHG: handle_usb_insertion: triggered
- <6>[ 1.362882 / 01-01 00:00:01.349][1] SMBCHG: smbchg_update_bmd_work: smbchg_update_bmd_work = 1
- <6>[ 1.362693 / 01-01 00:00:01.349][0] SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
- <3>[ 1.366717 / 01-01 00:00:01.349][0] qpnp-smbcharger qpnp-smbcharger-ffffffc0dc98f000: node /soc/qcom,spmi@fc4c0000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
- <6>[ 1.367520 / 01-01 00:00:01.349][0] qpnp-smbcharger qpnp-smbcharger-ffffffc0dc98f000: SMBCHG successfully probed batt=1 dc = 0 usb = 1
- <0>[ 1.367535 / 01-01 00:00:01.349][0] drv probe : 1292 qpnp-smbcharger 65
- <6>[ 1.367707 / 01-01 00:00:01.349][0] [MAX17050] max17050_probe : ----- Start-----
- <6>[ 1.367720 / 01-01 00:00:01.349][0] [MAX17050] max17050_probe : LGC profile
- <6>[ 1.367738 / 01-01 00:00:01.349][0] [MAX17050] max17050_parse_dt : <Battery ID> cell_info n = 0
- <6>[ 1.367807 / 01-01 00:00:01.349][0] [MAX17050] max17050_parse_dt : Platform data : rcomp = 0x3b, tempco = 0x192c, ichgterm = 0x280, vempty = 0xa05f, full_design = 0x16ac rescale_soc =9400, rescale_factor =0
- <6>[ 1.367904 / 01-01 00:00:01.349][0] [MAX17050] max17050_new_custom_model_write : Model_data Start
- <6>[ 1.368331 / 01-01 00:00:01.349][0] [MAX17050] max17050_new_custom_model_write :[CMP] recal_flag = 0 creset_flag = 0
- <6>[ 1.368706 / 01-01 00:00:01.359][0] [MAX17050] max17050_new_custom_model_write : STATUS = 0x8008
- <6>[ 1.368718 / 01-01 00:00:01.359][0] [MAX17050] max17050_new_custom_model_write : IC Non-Power-On-Reset state.
- <6>[ 1.368729 / 01-01 00:00:01.359][0] [MAX17050] max17050_model_data_write_work : NON-POWER_ON reset. Proceed Booting.
- <6>[ 1.368744 / 01-01 00:00:01.359][0] [MAX17050] max17050_model_data_write_work : use_ext_temp = 1
- <6>[ 1.369911 / 01-01 00:00:01.359][1] [MAX17050] max17050_probe : () ----- End -----
- <6>[ 1.371201 / 01-01 00:00:01.359][1] Wireless: unified_wlc_probe: [WLC] probe start
- <6>[ 1.371920 / 01-01 00:00:01.359][1] Wireless: unified_wlc_hw_init: [WLC] unified_wlc_hw_init
- <6>[ 1.371978 / 01-01 00:00:01.359][1] Wireless: unified_wlc_probe: [WLC] probe done
- <6>[ 1.372552 / 01-01 00:00:01.359][1] [IDTP9017] Start
- <6>[ 1.372761 / 01-01 00:00:01.359][1] Get wlc_active_n_gpio : 974
- <6>[ 1.372783 / 01-01 00:00:01.359][1] Get wlc_full_chg_gpio : 854
- <6>[ 1.372802 / 01-01 00:00:01.359][1] Get wlc_off_gpio : 857
- <3>[ 1.372813 / 01-01 00:00:01.359][1] Not exist die_shdn_off paramaeter
- <3>[ 1.372823 / 01-01 00:00:01.359][1] Not exist die_shdn_off paramaeter
- <3>[ 1.372833 / 01-01 00:00:01.359][1] Not exist die_shdn_off paramaeter
- <3>[ 1.372843 / 01-01 00:00:01.359][1] Not exist die_shdn_off paramaeter
- <3>[ 1.372853 / 01-01 00:00:01.359][1] Not exist die_shdn_hys paramaeter
- <3>[ 1.372864 / 01-01 00:00:01.359][1] Not exist tmep_off paramaeter
- <3>[ 1.372874 / 01-01 00:00:01.359][1] Not exist temp_hys paramaeter
- <6>[ 1.372933 / 01-01 00:00:01.359][1] Get limit_current : 700
- <6>[ 1.372945 / 01-01 00:00:01.359][1] Get out_voltage : 6500
- <6>[ 1.372966 / 01-01 00:00:01.359][1] Already set wlc_full_chg_gpio
- <6>[ 1.372978 / 01-01 00:00:01.359][1] Already set wlc_off_gpio
- <6>[ 1.372991 / 01-01 00:00:01.359][1] [IDTP9017] Complete IDTP9017 probe
- <6>[ 1.375355 / 01-01 00:00:01.359][1] [CC] charger_contr_probe start
- <6>[ 1.375400 / 01-01 00:00:01.359][1] [ChargerController] Present wireless current =700
- <6>[ 1.375720 / 01-01 00:00:01.359][1] cable_type = 8, batt_present = 1, pseudo_batt_info.mode = 0
- <6>[ 1.375744 / 01-01 00:00:01.359][1] [CC] change batt_temp[20], batt_temp_state[0], change batt_volt[3999], batt_volt_state[0]
- <6>[ 1.375756 / 01-01 00:00:01.359][1] [CC] charger_contr_probe done
- <6>[ 1.389619 / 01-01 00:00:01.379][1] [MAX17050] [MAX17050_PRINT_INFO]=F_cap=2902,recap=1586,Ibatt=-44,Iavg=-23,Empty=6143,Vbatt=3900,OCV=3880,SoC=58,AfterSoCRep=580,Raw=546,AfterSocVF=584,Raw=549,Rcomp0=0x3B,temp=0,learn=0x2633
- <6>[ 1.401148 / 01-01 00:00:01.389][2] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-<email omitted>
- <6>[ 1.401169 / 01-01 00:00:01.389][2] device-mapper: req-crypt: dm-req-crypt successfully initalized.
- <6>[ 1.401169 / 01-01 00:00:01.389][2]
- <6>[ 1.401189 / 01-01 00:00:01.389][2] Bluetooth: BlueSleep Mode Driver Ver 1.2
- <6>[ 1.401675 / 01-01 00:00:01.389][2] Bluetooth: bt_host_wake 973, bt_ext_wake 983
- <6>[ 1.401714 / 01-01 00:00:01.389][2] Bluetooth: host_wake_irq 448, polarity 0
- <6>[ 1.402800 / 01-01 00:00:01.389][2] cpuidle: using governor ladder
- <6>[ 1.402814 / 01-01 00:00:01.389][2] cpuidle: using governor menu
- <6>[ 1.402847 / 01-01 00:00:01.389][2] sdhci: Secure Digital Host Controller Interface driver
- <6>[ 1.402857 / 01-01 00:00:01.389][2] sdhci: Copyright(c) Pierre Ossman
- <6>[ 1.402867 / 01-01 00:00:01.389][2] sdhci-pltfm: SDHCI platform and OF driver helper
- <6>[ 1.408301 / 01-01 00:00:01.389][2] mmc0: no vqmmc regulator found
- <6>[ 1.408330 / 01-01 00:00:01.389][2] mmc0: no vmmc regulator found
- <6>[ 1.408526 / 01-01 00:00:01.389][2] mmc0: SDHCI controller on f9824900.sdhci [f9824900.sdhci] using 32-bit ADMA
- <6>[ 1.408942 / 01-01 00:00:01.399][1] [MAX17050] max17050_monitor_work : POLLING_FOR_COMPARE
- <6>[ 1.454251 / 01-01 00:00:01.439][1] [LGE][MMC][mmc_rescan ( ) START!] mmc0
- <0>[ 1.454261 / 01-01 00:00:01.439][2] drv probe : 1395 sdhci_msm 50
- <6>[ 1.471536 / 01-01 00:00:01.459][2] mmc1: no vqmmc regulator found
- <6>[ 1.471567 / 01-01 00:00:01.459][2] mmc1: no vmmc regulator found
- <6>[ 1.471761 / 01-01 00:00:01.459][2] mmc1: SDHCI controller on f98a4900.sdhci [f98a4900.sdhci] using 32-bit ADMA
- <6>[ 1.478816 / 01-01 00:00:01.469][1] msm-dwc3 f9200000.ssusb: charger type: USB_SDP_CHARGER
- <6>[ 1.480321 / 01-01 00:00:01.469][1] lge_pm_get_cable_info : adc_read-1800000
- <3>[ 1.480334 / 01-01 00:00:01.469][1]
- <3>[ 1.480334 / 01-01 00:00:01.469][1]
- <3>[ 1.480334 / 01-01 00:00:01.469][1] [PM]Cable detected: 1800000(OPEN)(1800, 500)
- <3>[ 1.480334 / 01-01 00:00:01.469][1]
- <6>[ 1.480404 / 01-01 00:00:01.469][1] dwc3 f9200000.dwc3: Avail curr from USB = 500
- <6>[ 1.480412 / 01-01 00:00:01.469][2] [Touch] NOTIFY_CONNECTION!
- <6>[ 1.480414 / 01-01 00:00:01.469][2] [Touch] TA Type: 1
- <6>[ 1.480422 / 01-01 00:00:01.469][2] [Touch] lg4945_connect: write charger_state = 0x01
- <6>[ 1.480486 / 01-01 00:00:01.469][1] [CC] update usb online. cc->online = 0, online = 1.
- <6>[ 1.480496 / 01-01 00:00:01.469][1] [CC] Present iusb current =500
- <6>[ 1.480507 / 01-01 00:00:01.469][1] [CC] After update_pm_psy_status (iusb=500)(CC=0)(org=0)(wlc=0)
- <6>[ 1.480517 / 01-01 00:00:01.469][1] [CC] USB PSY changed by original dwc (500)
- <6>[ 1.480538 / 01-01 00:00:01.469][1] [CC] OTP scenario enabled
- <6>[ 1.480553 / 01-01 00:00:01.469][1] [CC] USB Current Set!
- <6>[ 1.480569 / 01-01 00:00:01.469][1] [CC] Set iUSB usb current value = 500
- <6>[ 1.480582 / 01-01 00:00:01.469][1] [CC] Ibat max = 2000, OTP = -1, thermal = -1, set current = (0) -> (2000)
- <6>[ 1.480598 / 01-01 00:00:01.469][1] SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 2000
- <6>[ 1.480632 / 01-01 00:00:01.469][1] SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
- <6>[ 1.480684 / 01-01 00:00:01.469][1] SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 2000, set to 2000
- <6>[ 1.480707 / 01-01 00:00:01.469][1] [CC] After update_pm_psy_status (iusb=500)(CC=500)(org=500)(wlc=0)
- <6>[ 1.480725 / 01-01 00:00:01.469][1] [CC] USB Current Set!
- <0>[ 1.514256 / 01-01 00:00:01.499][2] drv probe : 1446 sdhci_msm 59
- <6>[ 1.514934 / 01-01 00:00:01.499][2] sdhci_msm f9864900.sdhci: No vreg data found for vdd
- <6>[ 1.529473 / 01-01 00:00:01.519][2] mmc2: no vqmmc regulator found
- <6>[ 1.529504 / 01-01 00:00:01.519][2] mmc2: no vmmc regulator found
- <6>[ 1.529699 / 01-01 00:00:01.519][2] mmc2: SDHCI controller on f9864900.sdhci [f9864900.sdhci] using 32-bit ADMA
- <3>[ 1.529783 / 01-01 00:00:01.519][2] mmc2: mmc_add_host: device_disable_async_suspend
- <6>[ 1.541471 / 01-01 00:00:01.529][1] mmc0: BKOPS_EN bit = 3
- <6>[ 1.541485 / 01-01 00:00:01.529][1] [mmc_read_ext_csd]cmdq_depth = 31 , cmdq_support = 1
- <6>[ 1.551003 / 01-01 00:00:01.539][1] [FS] mmc0: sdhci_msm_execute_tuning: finally setting the tuning phase to 5
- <6>[ 1.559299 / 01-01 00:00:01.549][1] mmc0: new HS400 MMC card at address 0001
- <6>[ 1.559311 / 01-01 00:00:01.549][1] [LGE][MMC][mmc_add_card ( )] mmc_hostname:mmc0, type:MMC
- <6>[ 1.560073 / 01-01 00:00:01.549][2] mmcblk0: mmc0:0001 DF4064 58.2 GiB
- <6>[ 1.560552 / 01-01 00:00:01.549][2] mmcblk0rpmb: mmc0:0001 DF4064 partition 3 4.00 MiB
- <6>[ 1.563525 / 01-01 00:00:01.549][2] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54
- <6>[ 1.566418 / 01-01 00:00:01.549][2] [LGE][MMC][mmc_add_card ( )] device_add & uevent posting complete!
- <3>[ 1.574308 / 01-01 00:00:01.559][2] mmc2: sdhci_msm_probe: device_disable_async_suspend
- <0>[ 1.574324 / 01-01 00:00:01.559][2] drv probe : 1506 sdhci_msm 59
- <6>[ 1.577030 / 01-01 00:00:01.559][2] hidraw: raw HID events driver (C) Jiri Kosina
- <6>[ 1.578539 / 01-01 00:00:01.559][2] usbcore: registered new interface driver usbhid
- <6>[ 1.578550 / 01-01 00:00:01.559][2] usbhid: USB HID core driver
- <6>[ 1.578903 / 01-01 00:00:01.569][2] zram: Created 1 device(s) ...
- <6>[ 1.579296 / 01-01 00:00:01.569][2] ashmem: initialized
- <6>[ 1.579390 / 01-01 00:00:01.569][2] logger: created 256K log 'log_main'
- <6>[ 1.579467 / 01-01 00:00:01.569][2] logger: created 256K log 'log_events'
- <6>[ 1.579547 / 01-01 00:00:01.569][2] logger: created 256K log 'log_radio'
- <6>[ 1.579626 / 01-01 00:00:01.569][2] logger: created 256K log 'log_system'
- <6>[ 1.579702 / 01-01 00:00:01.569][2] logger: created 256K log 'log_ccaudit'
- <6>[ 1.580389 / 01-01 00:00:01.569][2] sps:BAM 0x00000000f9304000 is registered.
- <6>[ 1.581087 / 01-01 00:00:01.569][2] qcom,qpnp-power-on qpnp-power-on-ffffffc0dc98b400: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
- <6>[ 1.581116 / 01-01 00:00:01.569][2] qcom,qpnp-power-on qpnp-power-on-ffffffc0dc98b400: PMIC@SID0: Power-off reason: Triggered from UVLO (Under Voltage Lock Out)
- <6>[ 1.581326 / 01-01 00:00:01.569][2] input: qpnp_pon as /devices/virtual/input/input2
- <6>[ 1.582150 / 01-01 00:00:01.569][2] qcom,qpnp-power-on qpnp-power-on-ffffffc0dc98dc00: No PON config. specified
- <6>[ 1.582193 / 01-01 00:00:01.569][2] qcom,qpnp-power-on qpnp-power-on-ffffffc0dc98dc00: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
- <6>[ 1.582217 / 01-01 00:00:01.569][2] qcom,qpnp-power-on qpnp-power-on-ffffffc0dc98dc00: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
- <6>[ 1.582407 / 01-01 00:00:01.569][2] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
- <6>[ 1.584252 / 01-01 00:00:01.569][2] pft [pft_init]: Drivr initialized successfully Feb 1 2016 11:07:57.n
- <6>[ 1.587885 / 01-01 00:00:01.569][2] clock-cpu-8994: OPP tables populated (cpu 3 and 5)
- <6>[ 1.587905 / 01-01 00:00:01.569][2] clock_cpu: a53: OPP voltage for 384000000: 800000
- <6>[ 1.587916 / 01-01 00:00:01.569][2] clock_cpu: a53: OPP voltage for 1440000000: 1090000
- <6>[ 1.587927 / 01-01 00:00:01.569][2] clock_cpu: a57: OPP voltage for 384000000: 880000
- <6>[ 1.587938 / 01-01 00:00:01.569][2] clock_cpu: a57: OPP voltage for 1824000000: 1070000
- <6>[ 1.589185 / 01-01 00:00:01.579][2] bimc-bwmon fc388000.qcom,cpu-bwmon: BW HWmon governor registered.
- <3>[ 1.590741 / 01-01 00:00:01.579][2] devfreq qcom,cpubw.27: Couldn't update frequency transition information.
- <3>[ 1.590914 / 01-01 00:00:01.579][2] devfreq qcom,mincpubw.28: Couldn't update frequency transition information.
- <6>[ 1.592238 / 01-01 00:00:01.579][2] mckernelapi : Mobicore API module initialized!
- <6>[ 1.592286 / 01-01 00:00:01.579][2] MobiCore mcd: MobiCore Driver, Build: Mon Feb 1 10:50:27 2016
- <6>[ 1.592297 / 01-01 00:00:01.579][2] MobiCore mcd: MobiCore mcDrvModuleApi version is 1.1
- <6>[ 1.592307 / 01-01 00:00:01.579][2] MobiCore mcd: MobiCore t-base-301B-Android-QC-64M-TZBSPv3-V007-17_17
- <6>[ 1.592980 / 01-01 00:00:01.579][2] usbcore: registered new interface driver snd-usb-audio
- <4>[ 1.594923 / 01-01 00:00:01.579][2] es9018_probe !!!!!!!!!!
- <6>[ 1.594955 / 01-01 00:00:01.579][2] es9018-codec 5-0048: es9018_populate_get_pdata: reset gpio 877
- <6>[ 1.594976 / 01-01 00:00:01.579][2] es9018-codec 5-0048: es9018_populate_get_pdata: hph switch 876
- <6>[ 1.594995 / 01-01 00:00:01.579][2] es9018-codec 5-0048: es9018_populate_get_pdata: power gpio 871
- <4>[ 1.595097 / 01-01 00:00:01.579][2] snd_soc_register_codec ret = 0
- <6>[ 1.601791 / 01-01 00:00:01.589][1] [LGE][MMC][mmc_rescan ( ) START!] mmc1
- <6>[ 1.604073 / 01-01 00:00:01.589][2] msm-compr-dsp qcom,msm-compr-dsp.41: msm_compr_probe: dev name qcom,msm-compr-dsp.41
- <6>[ 1.604501 / 01-01 00:00:01.589][2] msm-pcm-lpa qcom,msm-pcm-lpa.37: msm_pcm_probe: dev name qcom,msm-pcm-lpa.37
- <6>[ 1.605316 / 01-01 00:00:01.589][2] platform qcom,msm-voip-dsp.43: Driver msm-voip-dsp requests probe deferral
- <6>[ 1.605731 / 01-01 00:00:01.589][2] platform qcom,msm-pcm-voice.44: Driver msm-pcm-voice requests probe deferral
- <6>[ 1.620771 / 01-01 00:00:01.609][2] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
- <4>[ 1.620838 / 01-01 00:00:01.609][2] msm8994_asoc_machine_probe : mbhc_cfg.mbhc_det_gpio - 930
- <3>[ 1.622562 / 01-01 00:00:01.609][2] msm8994-asoc-snd fe034000.sound: ASoC: platform (null) not registered
- <6>[ 1.622610 / 01-01 00:00:01.609][2] platform fe034000.sound: Driver msm8994-asoc-snd requests probe deferral
- <6>[ 1.623421 / 01-01 00:00:01.609][2] netem: version 1.3
- <6>[ 1.623437 / 01-01 00:00:01.609][2] u32 classifier
- <6>[ 1.623447 / 01-01 00:00:01.609][2] Actions configured
- <6>[ 1.623459 / 01-01 00:00:01.609][2] Netfilter messages via NETLINK v0.30.
- <6>[ 1.623514 / 01-01 00:00:01.609][2] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- <6>[ 1.623765 / 01-01 00:00:01.609][2] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 1.623825 / 01-01 00:00:01.609][2] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 1.623835 / 01-01 00:00:01.609][2] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 1.624015 / 01-01 00:00:01.609][2] xt_time: kernel timezone is -0000
- <6>[ 1.624039 / 01-01 00:00:01.609][2] 939-23012-001-quicksec-vpnclient-for-android-3.3.1-2811-b2567729009d-2015-01-30_13-36-53
- <6>[ 1.624048 / 01-01 00:00:01.609][2] vpnclient kernel spd loaded.
- <6>[ 1.624218 / 01-01 00:00:01.609][2] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.624350 / 01-01 00:00:01.609][2] arp_tables: (C) 2002 David S. Miller
- <6>[ 1.624390 / 01-01 00:00:01.609][2] TCP: bic registered
- <6>[ 1.624400 / 01-01 00:00:01.609][2] TCP: cubic registered
- <6>[ 1.624410 / 01-01 00:00:01.609][2] Initializing XFRM netlink socket
- <6>[ 1.624627 / 01-01 00:00:01.609][2] NET: Registered protocol family 10
- <7>[ 1.625050 / 01-01 00:00:01.609][2] now = 4294937458, schedule = 4294949494, rounded schedule = 4294949594 => 4294949494
- <6>[ 1.625130 / 01-01 00:00:01.609][2] mip6: Mobile IPv6
- <6>[ 1.625157 / 01-01 00:00:01.609][2] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.625247 / 01-01 00:00:01.609][2] sit: IPv6 over IPv4 tunneling driver
- <6>[ 1.625509 / 01-01 00:00:01.609][2] NET: Registered protocol family 17
- <6>[ 1.625532 / 01-01 00:00:01.609][2] NET: Registered protocol family 15
- <5>[ 1.625570 / 01-01 00:00:01.609][2] Bridge firewalling registered
- <6>[ 1.625584 / 01-01 00:00:01.609][2] Ebtables v2.0 registered
- <6>[ 1.625771 / 01-01 00:00:01.609][4] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 1.625795 / 01-01 00:00:01.609][4] Bluetooth: RFCOMM socket layer initialized
- <6>[ 1.625802 / 01-01 00:00:01.609][4] Bluetooth: RFCOMM ver 1.11
- <6>[ 1.625812 / 01-01 00:00:01.609][4] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 1.625819 / 01-01 00:00:01.609][4] Bluetooth: BNEP filters: protocol multicast
- <6>[ 1.625831 / 01-01 00:00:01.609][4] Bluetooth: BNEP socket layer initialized
- <6>[ 1.625839 / 01-01 00:00:01.609][4] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 1.625850 / 01-01 00:00:01.609][4] Bluetooth: HIDP socket layer initialized
- <6>[ 1.625871 / 01-01 00:00:01.609][4] l2tp_core: L2TP core driver, V2.0
- <6>[ 1.625882 / 01-01 00:00:01.609][4] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- <6>[ 1.642183 / 01-01 00:00:01.629][0] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
- <4>[ 1.642238 / 01-01 00:00:01.629][0] msm8994_asoc_machine_probe : mbhc_cfg.mbhc_det_gpio - 930
- <3>[ 1.642270 / 01-01 00:00:01.629][0] msm8994_asoc_machine_probe: hph_aud_sw request failed, ret:-16
- <3>[ 1.644126 / 01-01 00:00:01.629][0] msm8994-asoc-snd fe034000.sound: ASoC: CODEC tomtom_codec not registered
- <6>[ 1.644174 / 01-01 00:00:01.629][0] platform fe034000.sound: Driver msm8994-asoc-snd requests probe deferral
- <5>[ 1.644664 / 01-01 00:00:01.629][4] Registering SWP/SWPB emulation handler
- <5>[ 1.644798 / 01-01 00:00:01.629][4] Loading module verification certificates
- <5>[ 1.645953 / 01-01 00:00:01.629][4] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 89f6b311b3f914a5e1a8ca0bdac0c636c6f7557b'
- <5>[ 1.646490 / 01-01 00:00:01.629][4] Key type encrypted registered
- <6>[ 1.648659 / 01-01 00:00:01.629][0] monitor-thermal lge,monitor-thermal.82: LGE monitor thermal Initialized
- <6>[ 1.649044 / 01-01 00:00:01.639][4] power_sysfs_parse_dt : Total sysfs node is 53
- <6>[ 1.649058 / 01-01 00:00:01.639][4] power_sysfs_parse_dt : xo_therm path is mandatory
- <6>[ 1.649068 / 01-01 00:00:01.639][4] power_sysfs_parse_dt : batt_therm path is mandatory
- <6>[ 1.649094 / 01-01 00:00:01.639][4] power_sysfs_parse_dt : health path is mandatory
- <6>[ 1.649110 / 01-01 00:00:01.639][4] power_sysfs_parse_dt : status path is mandatory
- <6>[ 1.649407 / 01-01 00:00:01.639][4] power_sysfs_make_path : pa_therm1 user node didn't have kernel node
- <6>[ 1.649436 / 01-01 00:00:01.639][4] power_sysfs_make_path : ac_online user node didn't have kernel node
- <6>[ 1.649459 / 01-01 00:00:01.639][4] power_sysfs_make_path : iusb_control user node didn't have kernel node
- <6>[ 1.649492 / 01-01 00:00:01.639][4] power_sysfs_make_path : speed_bin user node didn't have kernel node
- <6>[ 1.649499 / 01-01 00:00:01.639][4] power_sysfs_make_path : pvs_bin user node didn't have kernel node
- <6>[ 1.649526 / 01-01 00:00:01.639][4] power_sysfs_probe : Success Power sysfs Init
- <6>[ 1.649704 / 01-01 00:00:01.639][4] regulator-dummy: disabling
- <6>[ 1.661610 / 01-01 00:00:01.649][1] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
- <4>[ 1.661676 / 01-01 00:00:01.649][1] msm8994_asoc_machine_probe : mbhc_cfg.mbhc_det_gpio - 930
- <3>[ 1.661710 / 01-01 00:00:01.649][1] msm8994_asoc_machine_probe: hph_aud_sw request failed, ret:-16
- <3>[ 1.663554 / 01-01 00:00:01.649][1] msm8994-asoc-snd fe034000.sound: ASoC: CODEC tomtom_codec not registered
- <6>[ 1.663606 / 01-01 00:00:01.649][1] platform fe034000.sound: Driver msm8994-asoc-snd requests probe deferral
- <6>[ 1.665301 / 01-01 00:00:01.649][0] RNDIS_IPA module is loaded.
- <6>[ 1.666342 / 01-01 00:00:01.649][0] android_usb fe80f0c8.android_usb: device tree enabled
- <6>[ 1.666583 / 01-01 00:00:01.649][0] file system registered
- <6>[ 1.666619 / 01-01 00:00:01.649][0] mbim_init: initialize 1 instances
- <6>[ 1.666669 / 01-01 00:00:01.649][0] mbim_init: Initialized 1 ports
- <6>[ 1.666679 / 01-01 00:00:01.649][0] mbim_bam_setup: no_ports:1
- <6>[ 1.666794 / 01-01 00:00:01.649][0] mbim_bam_setup: Initialized 1 ports
- <6>[ 1.667430 / 01-01 00:00:01.649][0] rndis_qc_init: initialize rndis QC instance
- <6>[ 1.667677 / 01-01 00:00:01.649][0] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 1.667689 / 01-01 00:00:01.649][0] android_usb gadget: Number of LUNs=1
- <6>[ 1.667700 / 01-01 00:00:01.649][0] lun0: LUN: removable file: (no medium)
- <6>[ 1.667918 / 01-01 00:00:01.649][0] evp_setup: evp_setup:
- <6>[ 1.667934 / 01-01 00:00:01.649][0] evp_get_product_string: evp_get_product_string: evp convert string, maxV=07E, minV=03C, feature=08
- <6>[ 1.667946 / 01-01 00:00:01.649][0] evp_get_product_string: evp_get_product_string: strings_evp = Maxim EVP gr8rFiV8US07E03C08
- <6>[ 1.667960 / 01-01 00:00:01.649][0] android_usb gadget: android_usb ready
- <3>[ 1.671420 / 01-01 00:00:01.659][0] hallic_dev switch registration success
- <6>[ 1.671613 / 01-01 00:00:01.659][0] input: gpio-keys as /devices/soc.0/gpio_keys.88/input/input3
- <6>[ 1.672602 / 01-01 05:54:07.500][0] qcom,qpnp-rtc qpnp-rtc-ffffffc0dc98cc00: setting system clock to 2015-01-01 05:54:07 UTC (1420091647)
- <6>[ 1.672614 / 01-01 05:54:07.500][0] spich: spich_init
- <4>[ 1.672661 / 01-01 05:54:07.500][0] STM spich_probe(1043)
- <4>[ 1.672677 / 01-01 05:54:07.500][0] spich_probe name = contexthub
- <4>[ 1.672733 / 01-01 05:54:07.500][0] STM spich_init_instance(191)
- <4>[ 1.672749 / 01-01 05:54:07.500][0] STM post delay=0
- <6>[ 1.672816 / 01-01 05:54:07.500][0] spich spi32766.2: spich_init_instance: contexthub,ap2sh=855
- <6>[ 1.672854 / 01-01 05:54:07.500][0] spich spi32766.2: spich_init_instance: contexthub,sh2ap=852
- <6>[ 1.672880 / 01-01 05:54:07.500][0] spich spi32766.2: spich_init_instance: contexthub,boot0=858
- <6>[ 1.672917 / 01-01 05:54:07.500][0] spich spi32766.2: spich_init_instance: contexthub,nrst=856
- <6>[ 1.672942 / 01-01 05:54:07.500][0] spich spi32766.2: spich_init_instance: contexthub,wakeup=859
- <6>[ 1.672999 / 01-01 05:54:07.500][0] spich spi32766.2: spich_init_instance: contexthub,ldoen=861
- <6>[ 1.673050 / 01-01 05:54:07.500][0] spich spi32766.2: spich_init_instance: contexthub,cs0=933
- <6>[ 1.673086 / 01-01 05:54:07.500][0] spich spi32766.2: spich_init_instance: contexthub,cs2=946
- <4>[ 1.674981 / 01-01 05:54:07.500][1] STM Firmware image name = stm/LGESENSORHUB.BIN size = 18824
- <4>[ 1.674996 / 01-01 05:54:07.500][1] STM StmResetHub START status : 2
- <6>[ 1.676248 / 01-01 05:54:07.500][3] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
- <4>[ 1.676326 / 01-01 05:54:07.500][3] msm8994_asoc_machine_probe : mbhc_cfg.mbhc_det_gpio - 930
- <3>[ 1.676362 / 01-01 05:54:07.500][3] msm8994_asoc_machine_probe: hph_aud_sw request failed, ret:-16
- <4>[ 1.678045 / 01-01 05:54:07.500][1] STM StmResetHub END status : 2
- <4>[ 1.678055 / 01-01 05:54:07.500][1] STM StmResetHub START status : 1
- <3>[ 1.678259 / 01-01 05:54:07.500][3] msm8994-asoc-snd fe034000.sound: ASoC: CODEC tomtom_codec not registered
- <6>[ 1.678310 / 01-01 05:54:07.500][3] platform fe034000.sound: Driver msm8994-asoc-snd requests probe deferral
- <4>[ 1.681102 / 01-01 05:54:07.500][1] STM StmResetHub END status : 1
- <4>[ 1.681116 / 01-01 05:54:07.500][1] STM communication_check(282)
- <6>[ 1.689215 / 01-01 05:54:07.509][4] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
- <4>[ 1.689267 / 01-01 05:54:07.509][4] msm8994_asoc_machine_probe : mbhc_cfg.mbhc_det_gpio - 930
- <3>[ 1.689294 / 01-01 05:54:07.509][4] msm8994_asoc_machine_probe: hph_aud_sw request failed, ret:-16
- <3>[ 1.690869 / 01-01 05:54:07.509][4] msm8994-asoc-snd fe034000.sound: ASoC: CODEC tomtom_codec not registered
- <6>[ 1.690906 / 01-01 05:54:07.509][4] platform fe034000.sound: Driver msm8994-asoc-snd requests probe deferral
- <4>[ 1.748823 / 01-01 05:54:07.569][1] STM finish sending sync.
- <4>[ 1.760818 / 01-01 05:54:07.579][1] STM fw header : STM 18792 20150817 v102
- <4>[ 1.760829 / 01-01 05:54:07.579][1] STM firmware header exist !!!!
- <4>[ 1.760840 / 01-01 05:54:07.579][1] STM StmFlashRead(254) addr = 8004968 size=32
- <4>[ 1.762165 / 01-01 05:54:07.579][1] STM stm header : STM 18792 20150817 v102
- <4>[ 1.762175 / 01-01 05:54:07.579][1] STM stm header exist !!!!
- <4>[ 1.762184 / 01-01 05:54:07.579][1] STM both header exist!!!
- <4>[ 1.762194 / 01-01 05:54:07.579][1] STM firmware is already latest version
- <4>[ 1.762205 / 01-01 05:54:07.579][1] STM StmResetHub START status : 3
- <4>[ 1.762232 / 01-01 05:54:07.579][1] STM download firmware done
- <0>[ 1.762247 / 01-01 05:54:07.579][1] drv probe : 1663 spich 89
- <6>[ 1.765553 / 01-01 05:54:07.579][1] [BOOT_CAUSE] 131232, warm_reset = 1
- <6>[ 1.765566 / 01-01 05:54:07.579][1] [SMPL_CNT] ===> not smpl boot!!!!!
- <6>[ 1.772180 / 01-01 05:54:07.589][2] msm_thermal:interrupt_mode_init Interrupt mode init
- <6>[ 1.773544 / 01-01 05:54:07.589][4] lmh_lite:lmh_parse_sensor Registering sensor:[THRM_57-0]
- <6>[ 1.773722 / 01-01 05:54:07.589][2] lmh_lite:lmh_parse_sensor Registering sensor:[THRM_57-1]
- <6>[ 1.773873 / 01-01 05:54:07.589][2] lmh_lite:lmh_parse_sensor Registering sensor:[THRM_53-0]
- <6>[ 1.774007 / 01-01 05:54:07.589][2] lmh_lite:lmh_parse_sensor Registering sensor:[THRM_53-1]
- <6>[ 1.774133 / 01-01 05:54:07.589][2] lmh_lite:lmh_parse_sensor Registering sensor:[THRM_53-2]
- <6>[ 1.774261 / 01-01 05:54:07.589][2] lmh_lite:lmh_parse_sensor Registering sensor:[THRM_53-3]
- <6>[ 1.775249 / 01-01 05:54:07.589][0] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
- <4>[ 1.775399 / 01-01 05:54:07.589][0] msm8994_asoc_machine_probe : mbhc_cfg.mbhc_det_gpio - 930
- <3>[ 1.775475 / 01-01 05:54:07.589][0] msm8994_asoc_machine_probe: hph_aud_sw request failed, ret:-16
- <3>[ 1.777685 / 01-01 05:54:07.589][0] msm8994-asoc-snd fe034000.sound: ASoC: CODEC tomtom_codec not registered
- <6>[ 1.777732 / 01-01 05:54:07.589][0] platform fe034000.sound: Driver msm8994-asoc-snd requests probe deferral
- <6>[ 1.780506 / 01-01 05:54:07.599][4] rmnet_ipa started initialization
- <6>[ 1.780532 / 01-01 05:54:07.599][4] IPA SSR support = True
- <6>[ 1.780552 / 01-01 05:54:07.599][4] IPA ipa-loaduC = True
- <6>[ 1.787907 / 01-01 05:54:07.599][5] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
- <4>[ 1.787956 / 01-01 05:54:07.599][5] msm8994_asoc_machine_probe : mbhc_cfg.mbhc_det_gpio - 930
- <3>[ 1.787984 / 01-01 05:54:07.599][5] msm8994_asoc_machine_probe: hph_aud_sw request failed, ret:-16
- <3>[ 1.789615 / 01-01 05:54:07.609][5] msm8994-asoc-snd fe034000.sound: ASoC: CODEC tomtom_codec not registered
- <6>[ 1.789655 / 01-01 05:54:07.609][5] platform fe034000.sound: Driver msm8994-asoc-snd requests probe deferral
- <6>[ 1.791901 / 01-01 05:54:07.609][0] rmnet_ipa completed initialization
- <6>[ 1.800584 / 01-01 05:54:07.619][0] qcom,cc-debug-8992 fc401880.qcom,cc-debug: Registered debug mux.
- <6>[ 1.801721 / 01-01 05:54:07.619][0] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
- <4>[ 1.802964 / 01-01 05:54:07.619][2] dhd_module_init in
- <4>[ 1.803200 / 01-01 05:54:07.619][2] found wifi platform device bcmdhd_wlan
- <4>[ 1.803915 / 01-01 05:54:07.619][2] Power-up adapter 'DHD generic adapter'
- <4>[ 1.803948 / 01-01 05:54:07.619][2] wifi_platform_set_power = 1
- <6>[ 1.803982 / 01-01 05:54:07.619][1] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
- <6>[ 1.804003 / 01-01 05:54:07.619][0] mmc2: slot status change detected (0 -> 1), GPIO_ACTIVE_HIGH
- <4>[ 1.804086 / 01-01 05:54:07.619][1] msm8994_asoc_machine_probe : mbhc_cfg.mbhc_det_gpio - 930
- <3>[ 1.804124 / 01-01 05:54:07.619][1] msm8994_asoc_machine_probe: hph_aud_sw request failed, ret:-16
- <3>[ 1.805943 / 01-01 05:54:07.619][1] msm8994-asoc-snd fe034000.sound: ASoC: CODEC tomtom_codec not registered
- <6>[ 1.805979 / 01-01 05:54:07.619][1] platform fe034000.sound: Driver msm8994-asoc-snd requests probe deferral
- <6>[ 1.817050 / 01-01 05:54:07.629][1] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
- <4>[ 1.817107 / 01-01 05:54:07.629][1] msm8994_asoc_machine_probe : mbhc_cfg.mbhc_det_gpio - 930
- <3>[ 1.817139 / 01-01 05:54:07.629][1] msm8994_asoc_machine_probe: hph_aud_sw request failed, ret:-16
- <3>[ 1.818977 / 01-01 05:54:07.639][1] msm8994-asoc-snd fe034000.sound: ASoC: CODEC tomtom_codec not registered
- <6>[ 1.819019 / 01-01 05:54:07.639][1] platform fe034000.sound: Driver msm8994-asoc-snd requests probe deferral
- <6>[ 1.840757 / 01-01 05:54:07.659][0] [FS] mmc1: sdhci_msm_execute_tuning: finally setting the tuning phase to 4
- <6>[ 1.840965 / 01-01 05:54:07.659][0] mmc1: new ultra high speed SDR104 SDXC card at address e624
- <6>[ 1.840976 / 01-01 05:54:07.659][0] [LGE][MMC][mmc_add_card ( )] mmc_hostname:mmc1, type:SDXC
- <6>[ 1.841265 / 01-01 05:54:07.659][0] mmcblk1: mmc1:e624 SL200 183 GiB
- <6>[ 1.867335 / 01-01 05:54:07.679][1] mmcblk1: p1
- <6>[ 1.867579 / 01-01 05:54:07.679][1] [LGE][MMC][mmc_add_card ( )] device_add & uevent posting complete!
- <6>[ 1.871443 / 01-01 05:54:07.689][2] [LGE][MMC][mmc_rescan ( ) START!] mmc2
- <3>[ 1.871462 / 01-01 05:54:07.689][2] mmc2: mmc_suspend_host: enter
- <3>[ 1.875665 / 01-01 05:54:07.689][2] mmc2: mmc_suspend_host: exit
- <3>[ 1.875717 / 01-01 05:54:07.689][2] mmc2: mmc_resume_host: enter
- <3>[ 1.875728 / 01-01 05:54:07.689][2] mmc2: mmc_resume_host: exit
- <6>[ 1.880324 / 01-01 05:54:07.699][0] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
- <4>[ 1.880385 / 01-01 05:54:07.699][0] msm8994_asoc_machine_probe : mbhc_cfg.mbhc_det_gpio - 930
- <3>[ 1.880418 / 01-01 05:54:07.699][0] msm8994_asoc_machine_probe: hph_aud_sw request failed, ret:-16
- <3>[ 1.882200 / 01-01 05:54:07.699][0] msm8994-asoc-snd fe034000.sound: ASoC: CODEC tomtom_codec not registered
- <6>[ 1.882240 / 01-01 05:54:07.699][0] platform fe034000.sound: Driver msm8994-asoc-snd requests probe deferral
- <3>[ 1.888723 / 01-01 05:54:07.709][0] ipa ipa_uc_state_check:246 uC is not loaded
- <6>[ 1.944768 / 01-01 05:54:07.759][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 11
- <4>[ 1.948515 / 01-01 05:54:07.759][0] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
- <6>[ 1.948558 / 01-01 05:54:07.759][0] mmc2: new ultra high speed SDR104 SDIO card at address 0001
- <6>[ 1.948569 / 01-01 05:54:07.759][0] [LGE][MMC][mmc_add_card ( )] mmc_hostname:mmc2, type:SDIO
- <6>[ 1.948756 / 01-01 05:54:07.769][0] [LGE][MMC][mmc_add_card ( )] device_add & uevent posting complete!
- <3>[ 1.948768 / 01-01 05:54:07.769][0] mmc2: mmc_add_card: device_disable_async_suspend
- <3>[ 1.953973 / 01-01 05:54:07.769][4] bcm_wifi_set_power: wifi power successed to pull up
- <4>[ 1.953985 / 01-01 05:54:07.769][4] wifi_platform_bus_enumerate device present 1
- <4>[ 1.953993 / 01-01 05:54:07.769][4] bcm_wifi_carddetect: There is no callback for notify
- <6>[ 1.960009 / 01-01 05:54:07.779][2] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
- <4>[ 1.960075 / 01-01 05:54:07.779][2] msm8994_asoc_machine_probe : mbhc_cfg.mbhc_det_gpio - 930
- <3>[ 1.960110 / 01-01 05:54:07.779][2] msm8994_asoc_machine_probe: hph_aud_sw request failed, ret:-16
- <3>[ 1.961932 / 01-01 05:54:07.779][2] msm8994-asoc-snd fe034000.sound: ASoC: CODEC tomtom_codec not registered
- <6>[ 1.961973 / 01-01 05:54:07.779][2] platform fe034000.sound: Driver msm8994-asoc-snd requests probe deferral
- <4>[ 1.970166 / 01-01 05:54:07.789][4] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
- <4>[ 1.970250 / 01-01 05:54:07.789][4] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
- <4>[ 1.970258 / 01-01 05:54:07.789][4] bus num (host idx)=2, slot num (rca)=1
- <4>[ 1.970265 / 01-01 05:54:07.789][4] found adapter info 'DHD generic adapter'
- <4>[ 1.970293 / 01-01 05:54:07.789][4] alloc static buf at ffffffc0dc500000!
- <4>[ 1.975148 / 01-01 05:54:07.789][4] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2
- <4>[ 1.976028 / 01-01 05:54:07.789][4] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000
- <4>[ 1.976109 / 01-01 05:54:07.789][4] wifi_platform_prealloc: failed to alloc static mem section 7
- <4>[ 1.976124 / 01-01 05:54:07.789][4] wifi_platform_get_mac_addr
- <6>[ 1.976135 / 01-01 05:54:07.789][4] [bcm_wifi_get_mac_addr] Exiting. MyMac : 0 : 90 : 4c : 1f : 3a : e
- <4>[ 1.976458 / 01-01 05:54:07.789][4] wl_create_event_handler(): thread:wl_event_handler:14a started
- <6>[ 1.976469 / 01-01 05:54:07.789][1] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xffffffc0db146c10
- <4>[ 1.976598 / 01-01 05:54:07.789][4] dhd_attach(): thread:dhd_watchdog_thread:14b started
- <4>[ 1.976662 / 01-01 05:54:07.789][4] dhd_attach(): thread:dhd_dpc:14c started
- <4>[ 1.976730 / 01-01 05:54:07.789][4] dhd_attach(): thread:dhd_rxf:14d started
- <4>[ 1.976741 / 01-01 05:54:07.789][4] dhd_deferred_work_init: work queue initialized
- <4>[ 1.977045 / 01-01 05:54:07.789][4] Dongle Host Driver, version 1.201.54.8 (r)
- <4>[ 1.977045 / 01-01 05:54:07.789][4] Compiled in drivers/net/wireless/bcmdhd on Feb 1 2016 at 11:06:24
- <4>[ 1.977294 / 01-01 05:54:07.789][4] Register interface [wlan0] MAC: 00:90:4c:5e:97:ee
- <4>[ 1.977294 / 01-01 05:54:07.789][4]
- <4>[ 1.977309 / 01-01 05:54:07.789][4] dhd_prot_ioctl : bus is down. we have nothing to do
- <4>[ 1.977318 / 01-01 05:54:07.789][4] dhd_wl_ioctl: WLC_IOCTL: cmd: 3, ret = -1
- <4>[ 1.977427 / 01-01 05:54:07.789][4] wifi_platform_set_power = 0
- <3>[ 1.977438 / 01-01 05:54:07.789][4] bcm_wifi_set_power: wifi power successed to pull down
- <0>[ 1.977470 / 01-01 05:54:07.789][4] drv probe : 1795 bcmdhd_wlan 173
- <6>[ 1.977478 / 01-01 05:54:07.789][0] mmc2: slot status change detected (1 -> 0), GPIO_ACTIVE_HIGH
- <6>[ 1.977492 / 01-01 05:54:07.789][0] [LGE][MMC][mmc_rescan ( ) START!] mmc2
- <4>[ 1.977540 / 01-01 05:54:07.789][4] dhd_module_init out
- <6>[ 1.977549 / 01-01 05:54:07.789][4] clock_late_init: Removing enables held for handed-off clocks
- <6>[ 1.981664 / 01-01 05:54:07.799][2] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
- <4>[ 1.981742 / 01-01 05:54:07.799][2] msm8994_asoc_machine_probe : mbhc_cfg.mbhc_det_gpio - 930
- <3>[ 1.981781 / 01-01 05:54:07.799][2] msm8994_asoc_machine_probe: hph_aud_sw request failed, ret:-16
- <3>[ 1.983638 / 01-01 05:54:07.799][2] msm8994-asoc-snd fe034000.sound: ASoC: CODEC tomtom_codec not registered
- <6>[ 1.983684 / 01-01 05:54:07.799][2] platform fe034000.sound: Driver msm8994-asoc-snd requests probe deferral
- <6>[ 1.987027 / 01-01 05:54:07.799][4] ALSA device list:
- <6>[ 1.987037 / 01-01 05:54:07.799][4] No soundcards found.
- <3>[ 1.987084 / 01-01 05:54:07.799][4] Warning: unable to open an initial console.
- <6>[ 1.987123 / 01-01 05:54:07.799][4] Freeing unused kernel memory: 84K (ffffffc001600000 - ffffffc001615000)
- <5>[ 1.987131 / 01-01 05:54:07.799][4] [CCAudit] Run init process for OS startup
- <7>[ 1.990316 / 01-01 05:54:07.809][4] SELinux: 2048 avtab hash slots, 8120 rules.
- <7>[ 1.992004 / 01-01 05:54:07.809][4] SELinux: 2048 avtab hash slots, 8120 rules.
- <7>[ 1.992025 / 01-01 05:54:07.809][4] SELinux: 1 users, 2 roles, 647 types, 0 bools, 1 sens, 1024 cats
- <7>[ 1.992034 / 01-01 05:54:07.809][4] SELinux: 86 classes, 8120 rules
- <7>[ 1.992856 / 01-01 05:54:07.809][4] SELinux: Completing initialization.
- <7>[ 1.992864 / 01-01 05:54:07.809][4] SELinux: Setting up existing superblocks.
- <7>[ 1.992879 / 01-01 05:54:07.809][4] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <7>[ 1.992893 / 01-01 05:54:07.809][4] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- <7>[ 1.992945 / 01-01 05:54:07.809][4] SELinux: initialized (dev bdev, type bdev), not configured for labeling
- <7>[ 1.992958 / 01-01 05:54:07.809][4] SELinux: initialized (dev proc, type proc), uses genfs_contexts
- <7>[ 1.992980 / 01-01 05:54:07.809][4] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 1.992997 / 01-01 05:54:07.809][4] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- <6>[ 1.994755 / 01-01 05:54:07.809][2] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
- <4>[ 1.994825 / 01-01 05:54:07.809][2] msm8994_asoc_machine_probe : mbhc_cfg.mbhc_det_gpio - 930
- <3>[ 1.994857 / 01-01 05:54:07.809][2] msm8994_asoc_machine_probe: hph_aud_sw request failed, ret:-16
- <3>[ 1.996731 / 01-01 05:54:07.809][2] msm8994-asoc-snd fe034000.sound: ASoC: CODEC tomtom_codec not registered
- <6>[ 1.996781 / 01-01 05:54:07.809][2] platform fe034000.sound: Driver msm8994-asoc-snd requests probe deferral
- <7>[ 2.001245 / 01-01 05:54:07.819][4] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- <7>[ 2.001259 / 01-01 05:54:07.819][4] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- <7>[ 2.001269 / 01-01 05:54:07.819][4] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
- <7>[ 2.001282 / 01-01 05:54:07.819][4] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- <7>[ 2.001302 / 01-01 05:54:07.819][4] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- <7>[ 2.001363 / 01-01 05:54:07.819][4] SELinux: initialized (dev configfs, type configfs), not configured for labeling
- <7>[ 2.001374 / 01-01 05:54:07.819][4] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 2.001399 / 01-01 05:54:07.819][4] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <6>[ 2.008789 / 01-01 05:54:07.829][1] [WLC_STATUS] Not Connected WLC
- <5>[ 2.122558 / 01-01 05:54:07.939][0] type=1403 audit(1420091647.939:2): policy loaded auid=4294967295 ses=4294967295
- <5>[ 2.130830 / 01-01 05:54:07.949][4] type=1404 audit(1420091647.949:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
- <11>[ 2.404226 / 01-01 05:54:08.219][4] init: /init.qcom.rc: 390: invalid command 'lge_chcon_recursive'
- <11>[ 2.404248 / 01-01 05:54:08.219][4] init: /init.qcom.rc: 391: invalid command 'lge_chcon_recursive'
- <11>[ 2.404485 / 01-01 05:54:08.219][4] init: /init.qcom.rc: 834: user option requires a user id
- <11>[ 2.407931 / 01-01 05:54:08.219][0] init: invalid uid 'fm_radio'
- <11>[ 2.408108 / 01-01 05:54:08.219][0] init: invalid line ueventd.rc line for '*/'
- <6>[ 2.549096 / 01-01 05:54:08.369][4] [CC] changed battery_status_charger = (0) -> (1)
- <3>[ 2.549111 / 01-01 05:54:08.369][4]
- <3>[ 2.549111 / 01-01 05:54:08.369][4] get_prop_fuelgauge_capacity: fg_psy == NULL
- <6>[ 2.550025 / 01-01 05:54:08.369][5] [CC] charge_type = 3
- <11>[ 2.749106 / 01-01 05:54:08.569][1] init: /dev/hw_random not found
- <6>[ 2.749209 / 01-01 05:54:08.569][1] keychord: using input dev qpnp_pon for fevent
- <6>[ 2.749223 / 01-01 05:54:08.569][1] keychord: using input dev gpio-keys for fevent
- <7>[ 2.749844 / 01-01 05:54:08.569][1] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- <7>[ 2.750129 / 01-01 05:54:08.569][1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 2.751544 / 01-01 05:54:08.569][1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 2.751698 / 01-01 05:54:08.569][1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 2.752894 / 01-01 05:54:08.569][1] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- <7>[ 2.754191 / 01-01 05:54:08.569][1] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
- <11>[ 2.756581 / 01-01 05:54:08.569][1] init: /dev/hw_random not found
- <4>[ 2.853553 / 01-01 05:54:08.669][1] EXT4-fs (mmcblk0p51): Ignoring removed nomblk_io_submit option
- <6>[ 2.857597 / 01-01 05:54:08.669][1] EXT4-fs (mmcblk0p51): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- <7>[ 2.857633 / 01-01 05:54:08.669][1] SELinux: initialized (dev mmcblk0p51, type ext4), uses xattr
- <14>[ 2.857721 / 01-01 05:54:08.669][1] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/system,/system,ext4)=0
- <14>[ 2.858533 / 01-01 05:54:08.669][1] fs_mgr: Not running /system/bin/e2fsck on /dev/block/bootdevice/by-name/system (executable not in system image)
- <6>[ 2.862458 / 01-01 05:54:08.679][0] EXT4-fs (mmcblk0p51): mounted filesystem with ordered data mode. Opts: barrier=1
- <7>[ 2.862486 / 01-01 05:54:08.679][0] SELinux: initialized (dev mmcblk0p51, type ext4), uses xattr
- <14>[ 2.862542 / 01-01 05:54:08.679][0] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/system,target=/system,type=ext4)=0
- <4>[ 2.866762 / 01-01 05:54:08.679][1] EXT4-fs (mmcblk0p53): Ignoring removed nomblk_io_submit option
- <7>[ 2.873728 / 01-01 05:54:08.689][1] EXT4-fs (mmcblk0p53): ext4_orphan_cleanup: deleting unreferenced inode 156110
- <6>[ 2.874141 / 01-01 05:54:08.689][1] EXT4-fs (mmcblk0p53): 1 orphan inode deleted
- <6>[ 2.874154 / 01-01 05:54:08.689][1] EXT4-fs (mmcblk0p53): recovery complete
- <6>[ 2.899098 / 01-01 05:54:08.719][1] EXT4-fs (mmcblk0p53): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- <7>[ 2.899133 / 01-01 05:54:08.719][1] SELinux: initialized (dev mmcblk0p53, type ext4), uses xattr
- <14>[ 2.899215 / 01-01 05:54:08.719][1] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=0
- <14>[ 2.903495 / 01-01 05:54:08.719][1] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata
- <6>[ 2.990632 / 01-01 05:54:08.809][0] SMBCHG: smbchg_cc_esr_wa_check: ESR count is not zero, skipping
- <6>[ 2.990656 / 01-01 05:54:08.809][0] SMBCHG: smbchg_external_power_changed: changed current_limit = 500
- <6>[ 2.990687 / 01-01 05:54:08.809][0] SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
- <6>[ 2.990699 / 01-01 05:54:08.809][0] SMBCHG: smbchg_primary_usb_en: usb enabled, susp = 00, en? = 1, reason = 04
- <6>[ 2.990841 / 01-01 05:54:08.809][0] SMBCHG: smbchg_set_usb_current_max: usb current set to 500 mA
- <6>[ 2.990852 / 01-01 05:54:08.809][0] SMBCHG: smbchg_set_thermal_limited_usb_current_max: AICL = 1500, ICL = 500
- <6>[ 2.990888 / 01-01 05:54:08.809][0] SMBCHG: smbchg_is_parallel_usb_ok: SDP adapter, skipping
- <6>[ 2.991840 / 01-01 05:54:08.809][0] [CC] changed batt_status_cc = (0) -> (1)
- <6>[ 2.991851 / 01-01 05:54:08.809][0] [CC] chg_wake_locked
- <6>[ 2.994162 / 01-01 05:54:08.809][0] [CC] charge_type = 3
- <6>[ 2.996808 / 01-01 05:54:08.809][0] [CC] charge_type = 3
- <14>[ 3.008000 / 01-01 05:54:08.819][0] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- <14>[ 3.008053 / 01-01 05:54:08.819][0] e2fsck: /dev/block/bootdevice/by-name/userdata: clean, 1692/3440640 files, 796762/13742848 blocks
- <6>[ 3.020872 / 01-01 05:54:08.839][1] EXT4-fs (mmcblk0p53): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,errors=continue
- <7>[ 3.020907 / 01-01 05:54:08.839][1] SELinux: initialized (dev mmcblk0p53, type ext4), uses xattr
- <14>[ 3.020990 / 01-01 05:54:08.839][1] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0
- <4>[ 3.023820 / 01-01 05:54:08.839][1] EXT4-fs (mmcblk0p52): Ignoring removed nomblk_io_submit option
- <7>[ 3.026546 / 01-01 05:54:08.839][1] SELinux: initialized (dev mmcblk0p52, type ext4), uses xattr
- <14>[ 3.026623 / 01-01 05:54:08.839][1] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/cache,/cache,ext4)=0
- <14>[ 3.027319 / 01-01 05:54:08.839][1] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/cache
- <14>[ 3.044662 / 01-01 05:54:08.859][0] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- <14>[ 3.044708 / 01-01 05:54:08.859][0] e2fsck: /dev/block/bootdevice/by-name/cache: clean, 17/78880 files, 10382/315392 blocks
- <7>[ 3.053606 / 01-01 05:54:08.869][1] SELinux: initialized (dev mmcblk0p52, type ext4), uses xattr
- <14>[ 3.053670 / 01-01 05:54:08.869][1] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/cache,target=/cache,type=ext4)=0
- <7>[ 3.057514 / 01-01 05:54:08.869][1] SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr
- <14>[ 3.057589 / 01-01 05:54:08.869][1] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/persist,target=/persist,type=ext4)=0
- <7>[ 3.066909 / 01-01 05:54:08.879][1] SELinux: initialized (dev mmcblk0p1, type vfat), uses mountpoint labeling
- <14>[ 3.066947 / 01-01 05:54:08.879][1] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/modem,target=/firmware,type=vfat)=0
- <7>[ 3.070266 / 01-01 05:54:08.889][1] SELinux: initialized (dev mmcblk0p43, type ext4), uses xattr
- <14>[ 3.070338 / 01-01 05:54:08.889][1] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/sns,target=/sns,type=ext4)=0
- <7>[ 3.073875 / 01-01 05:54:08.889][1] SELinux: initialized (dev mmcblk0p42, type ext4), uses xattr
- <14>[ 3.073948 / 01-01 05:54:08.889][1] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/drm,target=/persist-lg,type=ext4)=0
- <7>[ 3.082286 / 01-01 05:54:08.899][1] SELinux: initialized (dev mmcblk0p44, type ext4), uses xattr
- <6>[ 3.082322 / 01-01 05:54:08.899][1] SELinux: Context u:object_r:mpt_file:s0 is not valid (left unmapped).
- <14>[ 3.082369 / 01-01 05:54:08.899][1] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/mpt,target=/mpt,type=ext4)=0
- <7>[ 3.088758 / 01-01 05:54:08.909][1] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
- <6>[ 3.249332 / 01-01 05:54:09.069][1] SELinux: Context u:object_r:sns_file:s0 is not valid (left unmapped).
- <11>[ 3.261006 / 01-01 05:54:09.079][1] init: Detected MSM SOC ID=251 SOC VER=11 BOARD TYPE=�va������T�����Ha������Ѐ�����
- <6>[ 3.277395 / 01-01 05:54:09.089][1] subsys-pil-tz fe200000.qcom,lpass: adsp: loading from 0x0000000007400000 to 0x0000000008800000
- <6>[ 3.503930 / 01-01 05:54:09.319][4] subsys-pil-tz fe200000.qcom,lpass: adsp: Brought out of reset
- <6>[ 3.545858 / 01-01 05:54:09.359][0] subsys-pil-tz fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received
- <6>[ 3.545883 / 01-01 05:54:09.359][0] subsys-pil-tz fe200000.qcom,lpass: Subsystem error monitoring/handling services are up
- <3>[ 3.546191 / 01-01 05:54:09.359][0] L-Notify: Generel: 7
- <6>[ 3.563644 / 01-01 05:54:09.379][2] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
- <4>[ 3.563841 / 01-01 05:54:09.379][2] msm8994_asoc_machine_probe : mbhc_cfg.mbhc_det_gpio - 930
- <3>[ 3.563948 / 01-01 05:54:09.379][2] msm8994_asoc_machine_probe: hph_aud_sw request failed, ret:-16
- <11>[ 3.564754 / 01-01 05:54:09.379][4] init: cannot find '/system/bin/pnpmgr', disabling 'pnpmgr'
- <11>[ 3.564926 / 01-01 05:54:09.379][4] init: Warning! Service conn_init needs a SELinux domain defined; please fix!
- <3>[ 3.565925 / 01-01 05:54:09.379][2] msm8994-asoc-snd fe034000.sound: ASoC: CODEC tomtom_codec not registered
- <6>[ 3.565986 / 01-01 05:54:09.379][2] platform fe034000.sound: Driver msm8994-asoc-snd requests probe deferral
- <6>[ 3.566131 / 01-01 05:54:09.379][4] msm_thermal:store_cc_enabled Core control disabled
- <6>[ 3.566227 / 01-01 05:54:09.379][4] msm_thermal:store_cc_enabled Core control enabled
- <6>[ 3.576739 / 01-01 05:54:09.389][0] apr_tal:Q6 Is Up
- <6>[ 3.576758 / 01-01 05:54:09.389][5] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
- <4>[ 3.576832 / 01-01 05:54:09.389][5] msm8994_asoc_machine_probe : mbhc_cfg.mbhc_det_gpio - 930
- <3>[ 3.576866 / 01-01 05:54:09.389][5] msm8994_asoc_machine_probe: hph_aud_sw request failed, ret:-16
- <3>[ 3.578571 / 01-01 05:54:09.389][5] msm8994-asoc-snd fe034000.sound: ASoC: CODEC tomtom_codec not registered
- <6>[ 3.578620 / 01-01 05:54:09.389][5] platform fe034000.sound: Driver msm8994-asoc-snd requests probe deferral
- <11>[ 3.588962 / 01-01 05:54:09.409][4] init: cannot find '/system/bin/memlock', disabling 'memlock'
- <6>[ 3.589428 / 01-01 05:54:09.409][5] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
- <4>[ 3.589549 / 01-01 05:54:09.409][5] msm8994_asoc_machine_probe : mbhc_cfg.mbhc_det_gpio - 930
- <3>[ 3.589592 / 01-01 05:54:09.409][5] msm8994_asoc_machine_probe: hph_aud_sw request failed, ret:-16
- <11>[ 3.590916 / 01-01 05:54:09.409][4] init: cannot find '/system/bin/btpd', disabling 'btpd'
- <3>[ 3.591322 / 01-01 05:54:09.409][5] msm8994-asoc-snd fe034000.sound: ASoC: CODEC tomtom_codec not registered
- <6>[ 3.591366 / 01-01 05:54:09.409][5] platform fe034000.sound: Driver msm8994-asoc-snd requests probe deferral
- <11>[ 3.593309 / 01-01 05:54:09.409][4] init: property 'persist.fuse_sdcard' doesn't exist while expanding '${persist.fuse_sdcard}'
- <11>[ 3.593326 / 01-01 05:54:09.409][4] init: cannot expand '${persist.fuse_sdcard}' while assigning to 'ro.fuse_sdcard'
- <6>[ 3.594011 / 01-01 05:54:09.409][4] android_usb android0: gadget enable(0)
- <3>[ 3.594023 / 01-01 05:54:09.409][4] enable_store: android_usb: already disabled
- <6>[ 3.594272 / 01-01 05:54:09.409][4] android_usb android0: LGE-USB request function list: mtp,adb
- <6>[ 3.594316 / 01-01 05:54:09.409][4] android_usb android0: gadget enable(1)
- <6>[ 3.597313 / 01-01 05:54:09.409][1] read descriptors
- <6>[ 3.597334 / 01-01 05:54:09.409][1] read strings
- <6>[ 3.597362 / 01-01 05:54:09.409][1] mtp_bind_config
- <6>[ 3.660811 / 01-01 05:54:09.479][0] sps:BAM 0x00000000fe104000 (va:0xffffff80016c0000) enabled: ver:0x17, number of pipes:31
- <6>[ 3.662241 / 01-01 05:54:09.479][2] tomtom-slim tomtom-slim-pgd: Platform data from device tree
- <6>[ 3.662372 / 01-01 05:54:09.479][2] tomtom-slim tomtom-slim-pgd: cdc-vdd-buck: vol=[2150000 2150000]uV, curr=[650000]uA, ond 0
- <6>[ 3.662412 / 01-01 05:54:09.479][2] tomtom-slim tomtom-slim-pgd: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
- <6>[ 3.662442 / 01-01 05:54:09.479][2] tomtom-slim tomtom-slim-pgd: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
- <6>[ 3.662472 / 01-01 05:54:09.479][2] tomtom-slim tomtom-slim-pgd: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
- <6>[ 3.662506 / 01-01 05:54:09.479][2] tomtom-slim tomtom-slim-pgd: cdc-vdd-a-1p2v: vol=[1200000 1200000]uV, curr=[2000]uA, ond 0
- <6>[ 3.662537 / 01-01 05:54:09.479][2] tomtom-slim tomtom-slim-pgd: cdc-vddcx-1: vol=[1200000 1200000]uV, curr=[33000]uA, ond 0
- <6>[ 3.662571 / 01-01 05:54:09.479][2] tomtom-slim tomtom-slim-pgd: cdc-vddcx-2: vol=[1200000 1200000]uV, curr=[33000]uA, ond 0
- <3>[ 3.662708 / 01-01 05:54:09.479][2] extcodec_get_pinctrl: Unable to get pinctrl handle
- <6>[ 3.660828 / 01-01 05:54:09.539][0] sps:BAM 0x00000000fe104000 is registered.
- <6>[ 3.718919 / 01-01 05:54:09.539][0] slimbus:1 laddr:0xcd, EAPC:0x1:0x30<6>[ 3.719054 / 01-01 05:54:09.539][0] tomtom-slim tomtom-slim-pgd: wcd9xxx_slim_device_up: slim device up
- <6>[ 3.719199 / 01-01 05:54:09.539][0] slimbus:1 laddr:0xcc, EAPC:0x0:0x30
- <6>[ 3.724668 / 01-01 05:54:09.539][0] tomtom-slim tomtom-slim-pgd: wcd9xxx_check_codec_type: detected tomtom_codec, major 0x105, minor 0x1, ver 0x2
- <6>[ 3.724685 / 01-01 05:54:09.539][0] wcd9xxx_core_res_init: num_irqs = 32, num_irq_regs = 4
- <0>[ 3.726508 / 01-01 05:54:09.539][0] drv probe : 3653 tomtom-slim 64
- <6>[ 3.732411 / 01-01 05:54:09.549][0] android_work: android_work: sent uevent USB_STATE=CONNECTED
- <6>[ 3.738110 / 01-01 05:54:09.549][1] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: hdmi audio support present
- <4>[ 3.738229 / 01-01 05:54:09.549][1] msm8994_asoc_machine_probe : mbhc_cfg.mbhc_det_gpio - 930
- <3>[ 3.738282 / 01-01 05:54:09.549][1] msm8994_asoc_machine_probe: hph_aud_sw request failed, ret:-16
- <6>[ 3.741100 / 01-01 05:54:09.559][1] tomtom_codec tomtom_codec: tomtom_codec_probe()
- <6>[ 3.762996 / 01-01 05:54:09.579][0] android_usb gadget: high-speed config #1: fe80f0c8.android_usb
- <6>[ 3.763177 / 01-01 05:54:09.579][0] [CC] After update_pm_psy_status (iusb=500)(CC=500)(org=500)(wlc=0)
- <6>[ 3.763200 / 01-01 05:54:09.579][0] [CC] USB Current Set!
- <6>[ 3.766081 / 01-01 05:54:09.579][0] [CC] charge_type = 3
- <4>[ 3.772332 / 01-01 05:54:09.589][0] msm-pcm-routing qcom,msm-pcm-routing.40: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
- <3>[ 3.772353 / 01-01 05:54:09.589][0] msm-pcm-routing qcom,msm-pcm-routing.40: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
- <3>[ 3.772830 / 01-01 05:54:09.589][0] msm-pcm-routing qcom,msm-pcm-routing.40: ASoC: no source widget found for SLIM_0_TX
- <3>[ 3.772847 / 01-01 05:54:09.589][0] msm-pcm-routing qcom,msm-pcm-routing.40: ASoC: Failed to add route SLIM_0_TX -> SLIM_0_TX -> QUAT_MI2S_RX Port Mixer
- <3>[ 3.793662 / 01-01 05:54:09.609][4] msm-pcm-routing qcom,msm-pcm-routing.40: ASoC: mux SLIM_0_RX AANC MUX has no paths
- <4>[ 3.794611 / 01-01 05:54:09.609][4] msm-pcm-routing qcom,msm-pcm-routing.40: ASoC: Failed to create TERT_MI2S_UL_HL debugfs file
- <3>[ 3.815891 / 01-01 05:54:09.629][4] i2c-msm-v2 f9967000.i2c: msm_bus_scale_register_client(mstr-id:84):0x22 (ok)
- <6>[ 3.818134 / 01-01 05:54:09.629][4] es9018-codec 5-0048: es9018_codec_probe(): entry
- <6>[ 3.818147 / 01-01 05:54:09.629][4] es9018-codec 5-0048: es9018_codec_probe(): codec->name = es9018-codec.5-0048
- <4>[ 3.818154 / 01-01 05:54:09.629][4] es9018_codec_probe !!!!!!!!!!
- <6>[ 3.818162 / 01-01 05:54:09.629][4] es9018-codec 5-0048: es9018_codec_probe(): exit
- <6>[ 3.818774 / 01-01 05:54:09.639][0] android_work: android_work: sent uevent USB_STATE=CONFIGURED
- <3>[ 3.818985 / 01-01 05:54:09.639][4] msm-dai-q6-dev qcom,msm-dai-q6-sb-2-rx.193: ASoC: no source widget found for SLIMBUS_2_RX
- <3>[ 3.818996 / 01-01 05:54:09.639][4] msm-dai-q6-dev qcom,msm-dai-q6-sb-2-rx.193: ASoC: Failed to add route SLIMBUS_2_RX -> direct -> Slimbus2 Playback
- <3>[ 3.819020 / 01-01 05:54:09.639][4] msm-dai-q6-dev qcom,msm-dai-q6-sb-2-tx.194: ASoC: no sink widget found for SLIMBUS_2_TX
- <3>[ 3.819028 / 01-01 05:54:09.639][4] msm-dai-q6-dev qcom,msm-dai-q6-sb-2-tx.194: ASoC: Failed to add route Slimbus2 Capture -> direct -> SLIMBUS_2_TX
- <6>[ 3.820610 / 01-01 05:54:09.639][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- <6>[ 3.821061 / 01-01 05:54:09.639][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
- <7>[ 3.822358 / 01-01 05:54:09.639][1] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
- <6>[ 3.822851 / 01-01 05:54:09.639][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> CS-VOICE mapping ok
- <6>[ 3.823127 / 01-01 05:54:09.639][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> VoIP mapping ok
- <6>[ 3.823510 / 01-01 05:54:09.639][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
- <6>[ 3.823771 / 01-01 05:54:09.639][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
- <6>[ 3.824010 / 01-01 05:54:09.639][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> PRI_MI2S_TX_HOSTLESS mapping ok
- <6>[ 3.824229 / 01-01 05:54:09.639][4] msm8994-asoc-snd fe034000.sound: msm-stub-rx <-> com,msm-dai-q6-afe-proxy-rx.206 mapping ok
- <6>[ 3.824454 / 01-01 05:54:09.639][4] msm8994-asoc-snd fe034000.sound: msm-stub-tx <-> qcom,msm-dai-q6-afe-proxy-tx.20 mapping ok
- <6>[ 3.824893 / 01-01 05:54:09.639][4] compress asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
- <6>[ 3.825158 / 01-01 05:54:09.639][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
- <6>[ 3.825415 / 01-01 05:54:09.639][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> SLIMBUS1_HOSTLESS mapping ok
- <6>[ 3.825682 / 01-01 05:54:09.639][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> SLIMBUS3_HOSTLESS mapping ok
- <6>[ 3.825927 / 01-01 05:54:09.639][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> SLIMBUS4_HOSTLESS mapping ok
- <6>[ 3.826179 / 01-01 05:54:09.639][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> VoLTE mapping ok
- <6>[ 3.827402 / 01-01 05:54:09.639][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
- <6>[ 3.827641 / 01-01 05:54:09.639][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> LSM1 mapping ok
- <6>[ 3.828060 / 01-01 05:54:09.639][4] compress asoc: snd-soc-dummy-dai <-> MultiMedia7 mapping ok
- <6>[ 3.828487 / 01-01 05:54:09.639][4] compress asoc: snd-soc-dummy-dai <-> MultiMedia10 mapping ok
- <6>[ 3.828788 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia8 mapping ok
- <6>[ 3.829053 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> QCHAT mapping ok
- <6>[ 3.829291 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
- <6>[ 3.829542 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> Voice2 mapping ok
- <6>[ 3.829793 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> INT_HFP_BT_HOSTLESS mapping ok
- <6>[ 3.830155 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia6 mapping ok
- <6>[ 3.830423 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: tomtom_vifeedback <-> qcom,msm-dai-q6-sb-4-tx.198 mapping ok
- <6>[ 3.830689 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: tomtom_rx2 <-> qcom,msm-dai-q6-sb-2-rx.193 mapping ok
- <6>[ 3.830997 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: tomtom_tx2 <-> qcom,msm-dai-q6-sb-2-tx.194 mapping ok
- <6>[ 3.831277 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> LSM2 mapping ok
- <6>[ 3.831587 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> LSM3 mapping ok
- <6>[ 3.831872 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> LSM4 mapping ok
- <6>[ 3.832188 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> LSM5 mapping ok
- <6>[ 3.832480 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> LSM6 mapping ok
- <6>[ 3.832800 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> LSM7 mapping ok
- <6>[ 3.833080 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> LSM8 mapping ok
- <6>[ 3.833503 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia9 mapping ok
- <6>[ 3.833804 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> VoWLAN mapping ok
- <6>[ 3.834279 / 01-01 05:54:09.649][4] compress asoc: snd-soc-dummy-dai <-> MultiMedia11 mapping ok
- <6>[ 3.834772 / 01-01 05:54:09.649][4] compress asoc: snd-soc-dummy-dai <-> MultiMedia12 mapping ok
- <6>[ 3.835221 / 01-01 05:54:09.649][4] compress asoc: snd-soc-dummy-dai <-> MultiMedia13 mapping ok
- <6>[ 3.835730 / 01-01 05:54:09.649][4] compress asoc: snd-soc-dummy-dai <-> MultiMedia14 mapping ok
- <6>[ 3.836198 / 01-01 05:54:09.649][4] compress asoc: snd-soc-dummy-dai <-> MultiMedia15 mapping ok
- <6>[ 3.836657 / 01-01 05:54:09.649][4] compress asoc: snd-soc-dummy-dai <-> MultiMedia16 mapping ok
- <6>[ 3.836950 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: tomtom_mad1 <-> CPE_LSM_NOHOST mapping ok
- <6>[ 3.837362 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
- <6>[ 3.837675 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: msm-stub-rx <-> qcom,msm-dai-q6-int-fm-rx.202 mapping ok
- <6>[ 3.837960 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: msm-stub-tx <-> qcom,msm-dai-q6-int-fm-tx.203 mapping ok
- <6>[ 3.838226 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: msm-stub-rx <-> qcom,msm-dai-q6-be-afe-pcm-rx.2 mapping ok
- <6>[ 3.838454 / 01-01 05:54:09.649][4] msm8994-asoc-snd fe034000.sound: msm-stub-tx <-> qcom,msm-dai-q6-be-afe-pcm-tx.2 mapping ok
- <6>[ 3.838757 / 01-01 05:54:09.659][4] msm8994-asoc-snd fe034000.sound: msm-stub-rx <-> qcom,msm-pri-auxpcm.54 mapping ok
- <6>[ 3.839007 / 01-01 05:54:09.659][4] msm8994-asoc-snd fe034000.sound: msm-stub-tx <-> qcom,msm-pri-auxpcm.54 mapping ok
- <6>[ 3.839252 / 01-01 05:54:09.659][4] msm8994-asoc-snd fe034000.sound: msm-stub-rx <-> qcom,msm-sec-auxpcm.55 mapping ok
- <6>[ 3.839463 / 01-01 05:54:09.659][4] msm8994-asoc-snd fe034000.sound: msm-stub-tx <-> qcom,msm-sec-auxpcm.55 mapping ok
- <6>[ 3.839669 / 01-01 05:54:09.659][4] msm_audrx_init: dev_nameqcom,msm-dai-q6-sb-0-rx.189
- <6>[ 3.932756 / 01-01 05:54:09.749][3] 'opened /dev/adsprpc-smd c 219 0'
- <6>[ 3.989307 / 01-01 05:54:09.809][3] warning: `msm_irqbalance' uses 32-bit capabilities (legacy support in use)
- <38>[ 4.027749 / 01-01 05:54:09.839][2] logd.auditd: start
- <6>[ 4.086616 / 01-01 05:54:09.899][0] msm8994-asoc-snd fe034000.sound: tomtom_rx1 <-> qcom,msm-dai-q6-sb-0-rx.189 mapping ok
- <6>[ 4.086994 / 01-01 05:54:09.899][1] msm_thermal:set_enabled enabled = 0
- <6>[ 4.087197 / 01-01 05:54:09.899][0] msm8994-asoc-snd fe034000.sound: tomtom_tx1 <-> qcom,msm-dai-q6-sb-0-tx.190 mapping ok
- <6>[ 4.087503 / 01-01 05:54:09.899][0] msm8994-asoc-snd fe034000.sound: tomtom_rx1 <-> qcom,msm-dai-q6-sb-1-rx.191 mapping ok
- <6>[ 4.087706 / 01-01 05:54:09.899][0] msm8994-asoc-snd fe034000.sound: tomtom_tx1 <-> qcom,msm-dai-q6-sb-1-tx.192 mapping ok
- <6>[ 4.087935 / 01-01 05:54:09.899][0] msm8994-asoc-snd fe034000.sound: tomtom_rx1 <-> qcom,msm-dai-q6-sb-3-rx.195 mapping ok
- <6>[ 4.088383 / 01-01 05:54:09.899][1] msm8994-asoc-snd fe034000.sound: tomtom_tx1 <-> qcom,msm-dai-q6-sb-3-tx.196 mapping ok
- <6>[ 4.088667 / 01-01 05:54:09.899][1] msm8994-asoc-snd fe034000.sound: tomtom_rx1 <-> qcom,msm-dai-q6-sb-4-rx.197 mapping ok
- <6>[ 4.089073 / 01-01 05:54:09.909][1] msm8994-asoc-snd fe034000.sound: msm-stub-tx <-> qcom,msm-dai-q6-incall-record-t mapping ok
- <6>[ 4.089295 / 01-01 05:54:09.909][3] msm8994-asoc-snd fe034000.sound: msm-stub-tx <-> qcom,msm-dai-q6-incall-record-r mapping ok
- <6>[ 4.089562 / 01-01 05:54:09.909][3] msm8994-asoc-snd fe034000.sound: tomtom_mad1 <-> qcom,msm-dai-q6-sb-5-tx.199 mapping ok
- <6>[ 4.090095 / 01-01 05:54:09.909][3] msm8994-asoc-snd fe034000.sound: msm-stub-rx <-> qcom,msm-dai-q6-incall-music-rx mapping ok
- <6>[ 4.090403 / 01-01 05:54:09.909][3] msm8994-asoc-snd fe034000.sound: msm-stub-rx <-> qcom,msm-dai-q6-incall-music-2- mapping ok
- <6>[ 4.103423 / 01-01 05:54:09.919][3] msm8994-asoc-snd fe034000.sound: msm-stub-tx <-> qcom,msm-dai-q6-mi2s-prim.212 mapping ok
- <6>[ 4.103768 / 01-01 05:54:09.919][3] msm8994-asoc-snd fe034000.sound: msm_hdmi_audio_codec_rx_dai <-> qcom,msm-dai-q6-hdmi.48 mapping ok
- <6>[ 4.104517 / 01-01 05:54:09.919][3] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- <6>[ 4.105293 / 01-01 05:54:09.919][3] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- <6>[ 4.106129 / 01-01 05:54:09.919][3] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- <6>[ 4.106914 / 01-01 05:54:09.919][3] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- <6>[ 4.107629 / 01-01 05:54:09.919][3] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- <6>[ 4.108421 / 01-01 05:54:09.919][3] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- <6>[ 4.109232 / 01-01 05:54:09.929][3] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- <6>[ 4.110026 / 01-01 05:54:09.929][3] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- <6>[ 4.110794 / 01-01 05:54:09.929][3] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- <6>[ 4.111666 / 01-01 05:54:09.929][3] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- <6>[ 4.112498 / 01-01 05:54:09.929][1] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- <6>[ 4.113277 / 01-01 05:54:09.929][1] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- <6>[ 4.114149 / 01-01 05:54:09.929][1] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- <6>[ 4.114535 / 01-01 05:54:09.929][1] msm8994-asoc-snd fe034000.sound: tas2552-amplifier <-> qcom,msm-dai-q6-mi2s-quat.213 mapping ok
- <6>[ 4.114856 / 01-01 05:54:09.929][1] msm8994-asoc-snd fe034000.sound: tas2552-amplifier <-> qcom,msm-dai-q6-mi2s-quat.213 mapping ok
- <6>[ 4.115597 / 01-01 05:54:09.929][1] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
- <6>[ 4.116189 / 01-01 05:54:09.929][1] msm8994-asoc-snd fe034000.sound: snd-soc-dummy-dai <-> QUAT_MI2S_RX_HOSTLESS mapping ok
- <6>[ 4.116430 / 01-01 05:54:09.929][1] msm8994-asoc-snd fe034000.sound: es9018-hifi <-> qcom,msm-dai-q6-mi2s-tert.214 mapping ok
- <6>[ 4.124490 / 01-01 05:54:09.939][1] input: msm8994-tomtom-snd-card Button Jack as /devices/soc.0/fe034000.sound/sound/card0/input4
- <6>[ 4.124598 / 01-01 05:54:09.939][1] keychord: using input dev msm8994-tomtom-snd-card Button Jack for fevent
- <6>[ 4.124718 / 01-01 05:54:09.939][1] input: msm8994-tomtom-snd-card Headset Jack as /devices/soc.0/fe034000.sound/sound/card0/input5
- <6>[ 4.125468 / 01-01 05:54:09.939][1] msm8994-asoc-snd fe034000.sound: property qcom,us-euro-gpios not detected in node /soc/sound
- <6>[ 4.136885 / 01-01 05:54:09.949][1] msm8994-asoc-snd fe034000.sound: msm8994_asoc_machine_probe: done.
- <0>[ 4.136907 / 01-01 05:54:09.949][1] drv probe : 3729 msm8994-asoc-snd 398
- <11>[ 4.247378 / 02-05 17:24:47.049][0] init: no such service 'ipacm-diag'
- <11>[ 4.261943 / 02-05 17:24:47.069][1] init: no such service 'ipacm'
- <6>[ 4.452404 / 02-05 17:24:47.259][0] FG: comp_temp_by_chg_current: fg_temp = 300 comp_temp1 = 290 comp_temp2 = 290 delta1 = -10 delta2 = 0 avg_chg_curr = -17 now_chg_curr = -17 batt_charging = 1
- <6>[ 4.452444 / 02-05 17:24:47.259][0] FG: update_temp_data: batt temp was changed !! 0 => 290
- <6>[ 4.453271 / 02-05 17:24:47.259][0] FG: update_battery_type: use battery type : LGE_BL51YF_LGC_3000mAh
- <6>[ 4.453316 / 02-05 17:24:47.259][0] of_batterydata_get_best_profile: LGE_BL51YF_LGC_3000mAh found
- <4>[ 4.476738 / 02-05 17:24:47.279][5] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time
- <4>[ 4.503160 / 02-05 17:24:47.309][5] QSEECOM: qseecom_load_app: App with id 3 (keymaste) now loaded
- <4>[ 4.510909 / 02-05 17:24:47.319][1] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time
- <3>[ 4.527619 / 02-05 17:24:47.329][4] scm_call failed: func id 0x32000101, arginfo: 0x3, args: 0x1a5c, 0x1f07c, 0xe3d00000, 0x0, ret: -2, syscall returns: 0xffffffda, 0x0, 0x0
- <3>[ 4.527637 / 02-05 17:24:47.329][4] QSEECOM: qseecom_load_app: scm_call to load app failed
- <3>[ 4.527653 / 02-05 17:24:47.329][4] QSEECOM: qseecom_ioctl: failed load_app request: -22
- <12>[ 4.555591 / 02-05 17:24:47.359][1] healthd: charger_controller: Unknown power supply type
- <3>[ 4.556342 / 02-05 17:24:47.359][3] devfreq qcom,kgsl-busmon.18: Couldn't update frequency transition information.
- <3>[ 4.697194 / 02-05 17:24:47.499][4] msm_ois_subdev_ioctl:546 Enter
- <3>[ 4.697211 / 02-05 17:24:47.499][4] msm_ois_subdev_ioctl:547 msm_ois_subdev_ioctl:547 o_ctrl ffffffc0dc5c7800 argp ffffffc0d85e7d60
- <3>[ 4.697220 / 02-05 17:24:47.499][4] msm_ois_get_subdev_id:472 Enter
- <3>[ 4.697227 / 02-05 17:24:47.499][4] msm_ois_get_subdev_id:482 subdev_id 0
- <3>[ 4.697235 / 02-05 17:24:47.499][4] msm_ois_get_subdev_id:483 Exit
- <3>[ 4.697249 / 02-05 17:24:47.499][4] msm_ois_close:516 Enter
- <3>[ 4.697257 / 02-05 17:24:47.499][4] msm_ois_close:532 Exit
- <3>[ 4.697279 / 02-05 17:24:47.499][4] msm_proxy_get_subdev_id:145 Enter
- <6>[ 4.697417 / 02-05 17:24:47.499][4] msm_csid_init: CSID_VERSION = 0x30010000
- <6>[ 4.700782 / 02-05 17:24:47.509][4] msm_csid_init: CSID_VERSION = 0x30010000
- <6>[ 4.703372 / 02-05 17:24:47.509][4] msm_csid_init: CSID_VERSION = 0x30010000
- <3>[ 4.713879 / 02-05 17:24:47.519][4] hdmi_tx_sysfs_wta_hpd:
- <3>[ 4.713894 / 02-05 17:24:47.519][4] hdmi_tx_sysfs_wta_hpd: HPD is already off
- <3>[ 4.713949 / 02-05 17:24:47.519][4] hdmi_tx_sysfs_wta_vendor_name: 'LGE'
- <3>[ 4.713987 / 02-05 17:24:47.519][4] hdmi_tx_sysfs_wta_product_description: 'pplus_tmo_us'
- <6>[ 4.714046 / 02-05 17:24:47.519][4] mdss_fb_blank_sub: + mdss_fb_open+0x228/0x30c fb0 mode:0
- <6>[ 4.714075 / 02-05 17:24:47.519][4] is_fake_u3: value:0, buf:0
- <6>[ 4.714075 / 02-05 17:24:47.519][4]
- <6>[ 4.714088 / 02-05 17:24:47.519][4] [PowerMode] lge_lg4945_panel_mode_switch: switch u0 to u3
- <3>[ 4.714320 / 02-05 17:24:47.519][0] lge_lg4945_panel_mode_cmd_send: Panel off state. Ignore mode change cmd 10
- <6>[ 4.714346 / 02-05 17:24:47.519][0] [Touch] LCD_EVENT_LCD_MODE!
- <6>[ 4.714356 / 02-05 17:24:47.519][0] [Touch] lcd_mode: 3 (prev: 3)
- <6>[ 4.714369 / 02-05 17:24:47.519][0] mdss_fb_blank_sub: -
- <6>[ 4.714420 / 02-05 17:24:47.519][0] mdss_fb_blank_sub: + mdss_fb_blank+0x130/0x144 fb0 mode:0
- <6>[ 4.714448 / 02-05 17:24:47.519][0] is_fake_u3: value:0, buf:0
- <6>[ 4.714448 / 02-05 17:24:47.519][0]
- <3>[ 4.714452 / 02-05 17:24:47.519][0] Not supported mode switch! u3 -> req blank:0
- <6>[ 4.714455 / 02-05 17:24:47.519][0] [Touch] FB_RESUME Start
- <6>[ 4.714458 / 02-05 17:24:47.519][0] [Touch] FB_RESUME End
- <6>[ 4.714482 / 02-05 17:24:47.519][3] [Touch] touch_ic_init Start
- <6>[ 4.714496 / 02-05 17:24:47.519][3] [Touch] lg4945_init: charger_state = 0x01
- <6>[ 4.715220 / 02-05 17:24:47.519][0] [Touch] version : v1.44, chip : 6, protocol : 3
- <6>[ 4.715220 / 02-05 17:24:47.519][0] [Touch] revision: 3
- <6>[ 4.715220 / 02-05 17:24:47.519][0] [Touch] product id : L0L57P1
- <6>[ 4.715220 / 02-05 17:24:47.519][0] [Touch] flash boot : idle, done, crc : ok
- <6>[ 4.716622 / 02-05 17:24:47.519][0] [Touch] resume ts->lpwg.screen
- <6>[ 4.716920 / 02-05 17:24:47.519][0] [Touch] lg4945_lpwg_control mode = 0
- <6>[ 4.717190 / 02-05 17:24:47.519][0] [Touch] swipe disable
- <6>[ 4.717202 / 02-05 17:24:47.519][0] [Touch] lg4945_tc_driving = 3
- <6>[ 4.717475 / 02-05 17:24:47.519][0] [Touch] IC Mode = 3
- <3>[ 4.722098 / 02-05 17:24:47.529][1] hdmi_tx_sysfs_rda_s3d_mode: '0'
- <6>[ 4.735201 / 02-05 17:24:47.539][5] mdss_fb_blank_sub: + mdss_fb_blank+0x130/0x144 fb0 mode:0
- <6>[ 4.735232 / 02-05 17:24:47.539][5] is_fake_u3: value:0, buf:0
- <6>[ 4.735232 / 02-05 17:24:47.539][5]
- <3>[ 4.735235 / 02-05 17:24:47.539][5] Not supported mode switch! u3 -> req blank:0
- <6>[ 4.735238 / 02-05 17:24:47.539][5] [Touch] FB_RESUME Start
- <6>[ 4.736330 / 02-05 17:24:47.539][2] subsys-restart: __subsystem_get(): Changing subsys fw_name to modem
- <6>[ 4.736593 / 02-05 17:24:47.539][0] IPA received MPSS BEFORE_POWERUP
- <3>[ 4.736976 / 02-05 17:24:47.539][1] ipa ipa_uc_state_check:246 uC is not loaded
- <6>[ 4.738732 / 02-05 17:24:47.549][0] [Touch] watch_init
- <6>[ 4.738944 / 02-05 17:24:47.549][2] IPA BEFORE_POWERUP handling is complete
- <6>[ 4.741618 / 02-05 17:24:47.549][2] [Touch] ext_watch_check_font_download:start
- <6>[ 4.741621 / 02-05 17:24:47.549][2] [Touch] ext_watch_check_font_download : font data is not
- <6>[ 4.741640 / 02-05 17:24:47.549][2] [Touch] skip font download, ret:-12
- <6>[ 4.741640 / 02-05 17:24:47.549][2] [Touch] touch_ic_init End
- <6>[ 4.741653 / 02-05 17:24:47.549][2] [Touch] FB_RESUME End
- <6>[ 4.741678 / 02-05 17:24:47.549][0] [Touch] touch_ic_init Start
- <6>[ 4.741682 / 02-05 17:24:47.549][0] [Touch] lg4945_init: charger_state = 0x01
- <3>[ 4.741873 / 02-05 17:24:47.549][2] hdmi_tx_sysfs_wta_hpd:
- <6>[ 4.742226 / 02-05 17:24:47.549][1] [Touch] version : v1.44, chip : 6, protocol : 3
- <6>[ 4.742226 / 02-05 17:24:47.549][1] [Touch] revision: 3
- <6>[ 4.742226 / 02-05 17:24:47.549][1] [Touch] product id : L0L57P1
- <6>[ 4.742226 / 02-05 17:24:47.549][1] [Touch] flash boot : idle, done, crc : ok
- <6>[ 4.743184 / 02-05 17:24:47.549][2] [Touch] resume ts->lpwg.screen
- <6>[ 4.743463 / 02-05 17:24:47.549][2] [Touch] lg4945_lpwg_control mode = 0
- <6>[ 4.743687 / 02-05 17:24:47.549][2] [Touch] swipe disable
- <6>[ 4.743697 / 02-05 17:24:47.549][2] [Touch] lg4945_tc_driving = 3
- <6>[ 4.743924 / 02-05 17:24:47.549][2] [Touch] IC Mode = 3
- <6>[ 4.746854 / 02-05 17:24:47.549][3] pil-q6v5-mss fc880000.qcom,mss: modem: loading from 0x0000000009000000 to 0x000000000f400000
- <6>[ 4.768738 / 02-05 17:24:47.579][0] [Touch] watch_init
- <6>[ 4.771718 / 02-05 17:24:47.579][3] [Touch] ext_watch_check_font_download:start
- <6>[ 4.771738 / 02-05 17:24:47.579][3] [Touch] ext_watch_check_font_download : font data is not
- <6>[ 4.771748 / 02-05 17:24:47.579][3] [Touch] skip font download, ret:-12
- <6>[ 4.771757 / 02-05 17:24:47.579][3] [Touch] touch_ic_init End
- <6>[ 4.775426 / 02-05 17:24:47.579][3] pil-q6v5-mss fc880000.qcom,mss: MBA: loading from 0x00000000e2d00000 to 0x00000000e2e00000
- <6>[ 4.820236 / 02-05 17:24:47.629][2] MSM-CPP cpp_init_hardware:1102 CPP HW Version: 0x50010000
- <3>[ 4.820261 / 02-05 17:24:47.629][2] MSM-CPP cpp_init_hardware:1123 stream_cnt:0
- <6>[ 4.839884 / 02-05 17:24:47.649][2] MSM-CPP cpp_load_fw:1260 MC Bootloader Version: 0x312e3176
- <6>[ 4.845090 / 02-05 17:24:47.649][0] MSM-CPP cpp_load_fw:1273 CPP FW Version: 0x1008001e
- <6>[ 4.850181 / 02-05 17:24:47.659][1] pil-q6v5-mss fc880000.qcom,mss: MBA boot done
- <4>[ 4.952554 / 02-05 17:24:47.759][3] audit: audit_lost=1 audit_rate_limit=20 audit_backlog_limit=64
- <3>[ 4.952575 / 02-05 17:24:47.759][3] audit: rate limit exceeded
- <6>[ 5.018944 / 02-05 17:24:47.829][1] [CC] current batt_temp[29], batt_temp_state[0], current batt_volt[3851], batt_volt_state[0]
- <7>[ 5.460652 / 02-05 17:24:48.269][1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 5.679137 / 02-05 17:24:48.489][1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <3>[ 5.766450 / 02-05 17:24:48.569][0] mdss_mdp_config_cx_voltage: mdss_mdp_config_cx_voltage: Initialized rpm_kvp structure
- <6>[ 5.767976 / 02-05 17:24:48.569][0] mdss_dsi_on+: ctrl=ffffffc0dbcea018 ndx=0 cur_power_state=1
- <6>[ 5.768066 / 02-05 17:24:48.569][0] mdss_dsi_on-:
- <6>[ 5.768082 / 02-05 17:24:48.569][0] mdss_dsi_on+: ctrl=ffffffc0dbceb018 ndx=1 cur_power_state=1
- <6>[ 5.768093 / 02-05 17:24:48.569][0] mdss_dsi_on-:
- <6>[ 5.768203 / 02-05 17:24:48.569][0] mdss_dsi_unblank+: ctrl=ffffffc0dbcea018 ndx=0 cur_blank_state=1 ctrl_state=3
- <6>[ 5.785821 / 02-05 17:24:48.589][0] mdss_dsi_unblank-:
- <6>[ 5.786093 / 02-05 17:24:48.589][0] mdss_dsi_unblank+: ctrl=ffffffc0dbceb018 ndx=1 cur_blank_state=1 ctrl_state=3
- <6>[ 5.791351 / 02-05 17:24:48.599][0] mdss_dsi_unblank-:
- <6>[ 5.914141 / 02-05 17:24:48.719][0] FG: fg_batt_profile_init: Battery profiles same, using default
- <6>[ 5.914179 / 02-05 17:24:48.719][0] FG: update_chg_iterm: current = -100, converted_raw = fd71, data = 71 fd
- <6>[ 6.171808 / 02-05 17:24:48.979][0] pil-q6v5-mss fc880000.qcom,mss: modem: Brought out of reset
- <6>[ 6.297221 / 02-05 17:24:49.099][0] pil-q6v5-mss fc880000.qcom,mss: modem: Power/Clock ready interrupt received
- <6>[ 6.297251 / 02-05 17:24:49.099][0] pil-q6v5-mss fc880000.qcom,mss: Subsystem error monitoring/handling services are up
- <6>[ 6.297718 / 02-05 17:24:49.099][2] IPA received MPSS AFTER_POWERUP
- <6>[ 6.297732 / 02-05 17:24:49.099][2] IPA AFTER_POWERUP handling is complete
- <3>[ 6.298385 / 02-05 17:24:49.099][0] M-Notify: General: 7
- <6>[ 6.362723 / 02-05 17:24:49.169][0] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service
- <6>[ 6.471330 / 02-05 17:24:49.279][0] apr_tal:Modem Is Up
- <3>[ 6.474123 / 02-05 17:24:49.279][1] diag: In diag_dci_write_proc, invalid data 0xffffffc0db629000, peripheral: 0, len: 527
- <6>[ 6.487548 / 02-05 17:24:49.289][3] Sending QMI_IPA_INIT_MODEM_DRIVER_REQ_V01
- <3>[ 6.487701 / 02-05 17:24:49.289][0] ipa-wan handle_indication_req:139 not send indication
- <3>[ 6.492270 / 02-05 17:24:49.299][0] ipa ipa_uc_wdi_event_log_info_handler:324 WDI stats ofst=0x26f44
- <3>[ 6.492298 / 02-05 17:24:49.299][0] ipa ipa_uc_response_hdlr:388 IPA uC loaded
- <6>[ 6.492613 / 02-05 17:24:49.299][0] QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 response received
- <6>[ 8.829398 / 02-05 17:24:51.639][0] FG: update_cc_cv_setpoint: Wrote 1b 6f to address 4f8 for CC_CV setpoint
- <3>[ 9.144822 / 02-05 17:24:51.949][4] camera_v4l2_open: msm_create_session id=1
- <3>[ 9.144858 / 02-05 17:24:51.949][4] msm_create_command_ack_q: session_id = 1, stream_id = 0
- <6>[ 9.147754 / 02-05 17:24:51.949][0] msm_csid_init: CSID_VERSION = 0x30010000
- <6>[ 9.163785 / 02-05 17:24:51.969][2] MSM-CPP cpp_init_hardware:1102 CPP HW Version: 0x50010000
- <3>[ 9.163825 / 02-05 17:24:51.969][2] MSM-CPP cpp_init_hardware:1123 stream_cnt:0
- <6>[ 9.184680 / 02-05 17:24:51.989][0] MSM-CPP cpp_load_fw:1260 MC Bootloader Version: 0x312e3176
- <6>[ 9.190789 / 02-05 17:24:51.999][0] MSM-CPP cpp_load_fw:1273 CPP FW Version: 0x1008001e
- <6>[ 9.200228 / 02-05 17:24:52.009][1] msm_cci_init:879: hw_version = 0x10020001
- <3>[ 9.200768 / 02-05 17:24:52.009][1] msm_sensor_match_id: read id: 0x240 expected id 0x240:
- <3>[ 9.200780 / 02-05 17:24:52.009][1] msm_sensor_power_up for imx234
- <3>[ 9.210626 / 02-05 17:24:52.019][2] qpnp_flash_led_brightness_set: 819: name = led:flash_0, val = 0
- <3>[ 9.210658 / 02-05 17:24:52.019][2] qpnp_flash_led_brightness_set: 819: name = led:flash_1, val = 0
- <3>[ 9.210672 / 02-05 17:24:52.019][2] qpnp_flash_led_brightness_set: 819: name = led:torch_0, val = 0
- <3>[ 9.210685 / 02-05 17:24:52.019][2] qpnp_flash_led_brightness_set: 819: name = led:torch_1, val = 0
- <3>[ 9.215706 / 02-05 17:24:52.019][1] msm_ois_subdev_ioctl:546 Enter
- <3>[ 9.215733 / 02-05 17:24:52.019][1] msm_ois_subdev_ioctl:547 msm_ois_subdev_ioctl:547 o_ctrl ffffffc0dc5c7800 argp ffffffc0c8243cc0
- <3>[ 9.215745 / 02-05 17:24:52.019][1] msm_ois_config:334 Enter
- <3>[ 9.215755 / 02-05 17:24:52.019][1] msm_ois_config:335 msm_ois_config type 6
- <3>[ 9.215765 / 02-05 17:24:52.019][1] msm_ois_power_up:573 msm_ois_power_up called
- <3>[ 9.215776 / 02-05 17:24:52.019][1] msm_ois_power_up:582 Exit
- <3>[ 9.215785 / 02-05 17:24:52.019][1] msm_ois_config:464 Exit
- <3>[ 9.215797 / 02-05 17:24:52.019][1] msm_ois_subdev_ioctl:546 Enter
- <3>[ 9.215808 / 02-05 17:24:52.019][1] msm_ois_subdev_ioctl:547 msm_ois_subdev_ioctl:547 o_ctrl ffffffc0dc5c7800 argp ffffffc0c8243cc0
- <3>[ 9.215817 / 02-05 17:24:52.019][1] msm_ois_config:334 Enter
- <3>[ 9.215827 / 02-05 17:24:52.019][1] msm_ois_config:335 msm_ois_config type 0
- <3>[ 9.215836 / 02-05 17:24:52.019][1] msm_ois_init:209 Enter
- <4>[ 9.216438 / 02-05 17:24:52.019][1] msm_ois_init : LGIT onsemi i2c shift addr 0x24!
- <3>[ 9.216450 / 02-05 17:24:52.019][1] msm_ois_init:265 Exit
- <3>[ 9.216460 / 02-05 17:24:52.019][1] msm_ois_config:464 Exit
- <3>[ 9.216598 / 02-05 17:24:52.019][1] msm_init_proxy:677 msm_init_proxy ENTER!
- <3>[ 9.217026 / 02-05 17:24:52.019][1] msm_init_proxy:683 init proxy alive!
- <3>[ 9.217370 / 02-05 17:24:52.019][1] msm_init_proxy:692 Model ID : 0xB4, REVISION ID : 0x3
- <3>[ 9.217381 / 02-05 17:24:52.019][1] msm_init_proxy:694 not calibrated!
- <3>[ 9.222602 / 02-05 17:24:52.029][1] msm_ois_subdev_ioctl:546 Enter
- <3>[ 9.222620 / 02-05 17:24:52.029][1] msm_ois_subdev_ioctl:547 msm_ois_subdev_ioctl:547 o_ctrl ffffffc0dc5c7800 argp ffffffc0c82efcc0
- <3>[ 9.222631 / 02-05 17:24:52.029][1] msm_ois_config:334 Enter
- <3>[ 9.222640 / 02-05 17:24:52.029][1] msm_ois_config:335 msm_ois_config type 3
- <3>[ 9.222650 / 02-05 17:24:52.029][1] lgit_init_set_onsemi_ois Enter
- <3>[ 9.222666 / 02-05 17:24:52.029][1] lgit_init_set_onsemi_ois: ois_on! ver:0
- <3>[ 9.225956 / 02-05 17:24:52.029][1] lc898122a_e2p_data_read start
- <3>[ 9.238589 / 02-05 17:24:52.039][1] lc898122a_e2p_data_read end
- <3>[ 9.238618 / 02-05 17:24:52.039][1] System version: c0, Filter Version: 6
- <3>[ 9.242158 / 02-05 17:24:52.049][1] msm_init_proxy:803 KSY module ID : 1
- <3>[ 9.242369 / 02-05 17:24:52.049][1] msm_init_proxy:815 inot read offset = -3 from eeprom
- <3>[ 9.248063 / 02-05 17:24:52.049][1] lc898122a_init_servo Liner Module
- <3>[ 9.261110 / 02-05 17:24:52.069][1] msm_proxy_thread_start:599 msm_proxy_thread_start
- <3>[ 9.261835 / 02-05 17:24:52.069][2] msm_proxy_thread_start:612 INIT_WORK done!
- <3>[ 9.261858 / 02-05 17:24:52.069][2] msm_proxy_thread_start:615 queue_work done!
- <3>[ 9.262038 / 02-05 17:24:52.069][2] msm_tcs_power_up:435 msm_tcs_power_up called
- <3>[ 9.262050 / 02-05 17:24:52.069][2] msm_tcs_power_up:443 Exit
- <3>[ 9.262068 / 02-05 17:24:52.069][2] msm_tcs_init:470 Enter
- <3>[ 9.267446 / 02-05 17:24:52.069][1] msm_tcs_init:483 exit
- <3>[ 9.309719 / 02-05 17:24:52.119][0] pause_tcs:282 pause_workqueue = 1
- <3>[ 9.310349 / 02-05 17:24:52.119][2] tcs stop Reading(CLR)
- <3>[ 9.388509 / 02-05 17:24:52.189][2] lgit_init_set_onsemi_ois OIS_VER_RELEASE
- <3>[ 9.406906 / 02-05 17:24:52.209][1] lgit_init_set_onsemi_ois End
- <3>[ 9.406936 / 02-05 17:24:52.209][1] msm_ois_config:464 Exit
- <3>[ 9.408696 / 02-05 17:24:52.219][2] camera_v4l2_close: close stream_id=0
- <3>[ 9.408929 / 02-05 17:24:52.219][2] msm_post_event : timeout cannot be negative Line 780
- <3>[ 9.408944 / 02-05 17:24:52.219][2] msm_delete_command_ack_q: session_id = 1, stream_id = 0
- <3>[ 9.408957 / 02-05 17:24:52.219][2] msm_destroy_session: session_id = 1
- <3>[ 9.410632 / 02-05 17:24:52.219][2] camera_v4l2_open: msm_create_session id=2
- <3>[ 9.410657 / 02-05 17:24:52.219][2] msm_create_command_ack_q: session_id = 2, stream_id = 0
- <3>[ 9.416028 / 02-05 17:24:52.219][3] msm_proxy_thread_end:622 msm_proxy_thread_end
- <3>[ 9.416060 / 02-05 17:24:52.219][3] stop_proxy:572 stop_proxy!
- <3>[ 9.418769 / 02-05 17:24:52.229][0] get_proxy:568 end workqueue!
- <3>[ 9.419888 / 02-05 17:24:52.229][1] stop_proxy:578 destroy_workqueue!
- <3>[ 9.427014 / 02-05 17:24:52.229][2] ipa-wan ipa_wwan_ioctl:1281 dev(rmnet_data0) register to IPA
- <3>[ 9.428730 / 02-05 17:24:52.239][0] get_tcs:257 end workqueue!
- <3>[ 9.428819 / 02-05 17:24:52.239][1] stop_tcs:270 destroy_workqueue!
- <3>[ 9.428848 / 02-05 17:24:52.239][1] msm_tcs_power_down:450 Enter
- <3>[ 9.428857 / 02-05 17:24:52.239][2] ipa-wan ipa_wwan_ioctl:1281 dev(rmnet_data1) register to IPA
- <3>[ 9.428868 / 02-05 17:24:52.239][1] msm_tcs_power_down:463 Exit
- <3>[ 9.428950 / 02-05 17:24:52.239][1] stop_proxy:572 stop_proxy!
- <3>[ 9.428981 / 02-05 17:24:52.239][1] msm_ois_subdev_ioctl:546 Enter
- <3>[ 9.428999 / 02-05 17:24:52.239][1] msm_ois_subdev_ioctl:547 msm_ois_subdev_ioctl:547 o_ctrl ffffffc0dc5c7800 argp ffffffc0ba4e3cc0
- <3>[ 9.429016 / 02-05 17:24:52.239][1] msm_ois_config:334 Enter
- <3>[ 9.429028 / 02-05 17:24:52.239][1] msm_ois_config:335 msm_ois_config type 2
- <3>[ 9.429044 / 02-05 17:24:52.239][1] msm_ois_power_down:179 Enter
- <3>[ 9.429937 / 02-05 17:24:52.239][0] msm_ois_power_down:201 Exit
- <3>[ 9.429950 / 02-05 17:24:52.239][0] msm_ois_config:464 Exit
- <3>[ 9.430109 / 02-05 17:24:52.239][1] ipa-wan ipa_wwan_ioctl:1281 dev(rmnet_data2) register to IPA
- <3>[ 9.430249 / 02-05 17:24:52.239][0] msm_ois_close:516 Enter
- <3>[ 9.430264 / 02-05 17:24:52.239][0] msm_ois_close:532 Exit
- <3>[ 9.431247 / 02-05 17:24:52.239][2] ipa-wan ipa_wwan_ioctl:1281 dev(rmnet_data3) register to IPA
- <3>[ 9.431355 / 02-05 17:24:52.239][0] qpnp_flash_led_brightness_set: 819: name = led:flash_0, val = 0
- <3>[ 9.431466 / 02-05 17:24:52.239][0] qpnp_flash_led_brightness_set: 819: name = led:flash_1, val = 0
- <3>[ 9.431500 / 02-05 17:24:52.239][0] qpnp_flash_led_brightness_set: 819: name = led:torch_0, val = 0
- <3>[ 9.431529 / 02-05 17:24:52.239][0] qpnp_flash_led_brightness_set: 819: name = led:torch_1, val = 0
- <3>[ 9.432567 / 02-05 17:24:52.239][1] ipa-wan ipa_wwan_ioctl:1281 dev(rmnet_data4) register to IPA
- <3>[ 9.433234 / 02-05 17:24:52.239][0] msm_sensor_power_down for imx234
- <3>[ 9.434387 / 02-05 17:24:52.239][1] ipa-wan ipa_wwan_ioctl:1281 dev(rmnet_data5) register to IPA
- <3>[ 9.435498 / 02-05 17:24:52.239][1] ipa-wan ipa_wwan_ioctl:1281 dev(rmnet_data6) register to IPA
- <3>[ 9.436629 / 02-05 17:24:52.239][0] ipa-wan ipa_wwan_ioctl:1281 dev(rmnet_data7) register to IPA
- <6>[ 9.490442 / 02-05 17:24:52.299][2] msm_csid_init: CSID_VERSION = 0x30010000
- <6>[ 9.507851 / 02-05 17:24:52.309][0] MSM-CPP cpp_init_hardware:1102 CPP HW Version: 0x50010000
- <3>[ 9.507885 / 02-05 17:24:52.309][0] MSM-CPP cpp_init_hardware:1123 stream_cnt:0
- <6>[ 9.513146 / 02-05 17:24:52.319][0] msm_cci_init:879: hw_version = 0x10020001
- <3>[ 9.513415 / 02-05 17:24:52.319][1] msm_sensor_match_id: read id: 0x5670 expected id 0x5670:
- <3>[ 9.513429 / 02-05 17:24:52.319][1] msm_sensor_power_up for ov5670w
- <6>[ 9.530325 / 02-05 17:24:52.339][2] MSM-CPP cpp_load_fw:1260 MC Bootloader Version: 0x312e3176
- <6>[ 9.536789 / 02-05 17:24:52.339][2] MSM-CPP cpp_load_fw:1273 CPP FW Version: 0x1008001e
- <3>[ 9.643427 / 02-05 17:24:52.449][0] camera_v4l2_close: close stream_id=0
- <3>[ 9.643689 / 02-05 17:24:52.449][1] msm_post_event : timeout cannot be negative Line 780
- <3>[ 9.643703 / 02-05 17:24:52.449][1] msm_delete_command_ack_q: session_id = 2, stream_id = 0
- <3>[ 9.643713 / 02-05 17:24:52.449][1] msm_destroy_session: session_id = 2
- <3>[ 9.644334 / 02-05 17:24:52.449][1] camera_v4l2_open: msm_create_session id=3
- <3>[ 9.644353 / 02-05 17:24:52.449][1] msm_create_command_ack_q: session_id = 3, stream_id = 0
- <3>[ 9.665869 / 02-05 17:24:52.469][0] msm_sensor_power_down for ov5670w
- <6>[ 9.729588 / 02-05 17:24:52.539][1] msm_csid_init: CSID_VERSION = 0x30010000
- <6>[ 9.745107 / 02-05 17:24:52.549][0] MSM-CPP cpp_init_hardware:1102 CPP HW Version: 0x50010000
- <3>[ 9.745141 / 02-05 17:24:52.549][0] MSM-CPP cpp_init_hardware:1123 stream_cnt:0
- <3>[ 9.752951 / 02-05 17:24:52.559][2] msm_sensor_match_id: read id: 0x5670 expected id 0x5670:
- <3>[ 9.753000 / 02-05 17:24:52.559][2] msm_sensor_power_up for ov5670
- <6>[ 9.766930 / 02-05 17:24:52.569][1] MSM-CPP cpp_load_fw:1260 MC Bootloader Version: 0x312e3176
- <6>[ 9.772770 / 02-05 17:24:52.579][1] MSM-CPP cpp_load_fw:1273 CPP FW Version: 0x1008001e
- <3>[ 9.908635 / 02-05 17:24:52.709][1] camera_v4l2_close: close stream_id=0
- <3>[ 9.909079 / 02-05 17:24:52.719][3] msm_post_event : timeout cannot be negative Line 780
- <3>[ 9.909094 / 02-05 17:24:52.719][3] msm_delete_command_ack_q: session_id = 3, stream_id = 0
- <3>[ 9.909105 / 02-05 17:24:52.719][3] msm_destroy_session: session_id = 3
- <12>[ 9.910595 / 02-05 17:24:52.719][3] avc: denied { set } for property=persist.camera.preview.count scontext=u:r:mediaserver:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service
- <11>[ 9.910627 / 02-05 17:24:52.719][3] init: sys_prop: permission denied uid:1013 name:persist.camera.preview.count
- <3>[ 9.921811 / 02-05 17:24:52.729][1] msm_sensor_power_down for ov5670
- <3>[ 10.110137 / 02-05 17:24:52.919][4] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
- <6>[ 10.112673 / 02-05 17:24:52.919][4] es9018_get_left_volume_enum(): Left Volume= -0 db
- <6>[ 10.112728 / 02-05 17:24:52.919][4] es9018_get_right_volume_enum(): Right Volume= -0 db
- <6>[ 10.112772 / 02-05 17:24:52.919][4] es9018_get_master_volume_enum(): Master Volume= -0 db
- <6>[ 10.112814 / 02-05 17:24:52.919][4] es9018_get_filter_enum(): ucontrol = 2
- <6>[ 10.112856 / 02-05 17:24:52.919][4] es9018_get_power_state_enum(): power state = 0
- <6>[ 10.112865 / 02-05 17:24:52.919][4] es9018_get_power_state_enum(): ucontrol = 0
- <3>[ 10.113306 / 02-05 17:24:52.919][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.113432 / 02-05 17:24:52.919][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.113545 / 02-05 17:24:52.919][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.113626 / 02-05 17:24:52.919][4] msm_compr_audio_effects_config_get: stream or effects inactive
- <3>[ 10.113906 / 02-05 17:24:52.919][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.113986 / 02-05 17:24:52.919][4] msm_compr_audio_effects_config_get: stream or effects inactive
- <3>[ 10.114223 / 02-05 17:24:52.919][4] msm_compr_audio_effects_config_get: stream or effects inactive
- <3>[ 10.114556 / 02-05 17:24:52.919][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.114643 / 02-05 17:24:52.919][4] msm_compr_audio_effects_config_get: stream or effects inactive
- <3>[ 10.114914 / 02-05 17:24:52.919][4] msm_compr_audio_effects_config_get: stream or effects inactive
- <3>[ 10.115585 / 02-05 17:24:52.919][4] msm_compr_audio_effects_config_get: stream or effects inactive
- <3>[ 10.116558 / 02-05 17:24:52.919][4] msm_compr_audio_effects_config_get: stream or effects inactive
- <3>[ 10.117345 / 02-05 17:24:52.919][4] msm_compr_audio_effects_config_get: stream or effects inactive
- <3>[ 10.118053 / 02-05 17:24:52.919][4] msm_compr_audio_effects_config_get: stream or effects inactive
- <3>[ 10.118537 / 02-05 17:24:52.919][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.119328 / 02-05 17:24:52.929][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.119454 / 02-05 17:24:52.929][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.119570 / 02-05 17:24:52.929][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.119737 / 02-05 17:24:52.929][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.119921 / 02-05 17:24:52.929][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.120039 / 02-05 17:24:52.929][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.120160 / 02-05 17:24:52.929][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.120360 / 02-05 17:24:52.929][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.120557 / 02-05 17:24:52.929][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.120762 / 02-05 17:24:52.929][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.120982 / 02-05 17:24:52.929][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.121110 / 02-05 17:24:52.929][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.121227 / 02-05 17:24:52.929][4] msm_pcm_volume_ctl_get substream runtime not found
- <3>[ 10.121351 / 02-05 17:24:52.929][4] msm_pcm_volume_ctl_get substream runtime not found
- <5>[ 10.198917 / 02-05 17:24:53.009][1] pet_watchdog
- <6>[ 10.301808 / 02-05 17:24:53.109][0] [CC] charge_type = 3
- <12>[ 10.302980 / 02-05 17:24:53.109][3] healthd: charger_controller: Unknown power supply type
- <12>[ 10.306128 / 02-05 17:24:53.109][3] healthd: charger_controller: Unknown power supply type
- <6>[ 11.459954 / 02-05 17:24:54.269][1] [MAX17050] [MAX17050_PRINT_INFO]=F_cap=2902,recap=1584,Ibatt=1076,Iavg=454,Empty=154,Vbatt=3776,OCV=3880,SoC=57,AfterSoCRep=579,Raw=545,AfterSocVF=584,Raw=549,Rcomp0=0x3B,temp=29,learn=0x2633
- <6>[ 11.469763 / 02-05 17:24:54.279][1] [MAX17050] [CMP] c_soc=57 b_soc=58 c_vfocv=3880 b_vfocv=3880 tol=80
- <6>[ 11.492602 / 02-05 17:24:54.299][1] [CC] charge_type = 3
- <12>[ 11.496659 / 02-05 17:24:54.299][1] healthd: charger_controller: Unknown power supply type
- <6>[ 11.755736 / 02-05 17:24:54.559][0] [CC] charge_type = 3
- <12>[ 15.308658 / 02-05 17:24:58.109][1] healthd: charger_controller: Unknown power supply type
- <6>[ 15.678810 / 02-05 18:24:58.489][0] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
- <6>[ 15.678834 / 02-05 18:24:58.489][0] lowmemorykiller: oom_adj 0 => oom_score_adj 0
- <6>[ 15.678843 / 02-05 18:24:58.489][0] lowmemorykiller: oom_adj 1 => oom_score_adj 58
- <6>[ 15.678853 / 02-05 18:24:58.489][0] lowmemorykiller: oom_adj 2 => oom_score_adj 117
- <6>[ 15.678862 / 02-05 18:24:58.489][0] lowmemorykiller: oom_adj 3 => oom_score_adj 176
- <6>[ 15.678872 / 02-05 18:24:58.489][0] lowmemorykiller: oom_adj 9 => oom_score_adj 529
- <6>[ 15.678881 / 02-05 18:24:58.489][0] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
- <6>[ 17.795837 / 02-05 18:25:00.599][1] acc_open
- <6>[ 17.795870 / 02-05 18:25:00.599][1] acc_release
- <6>[ 18.053090 / 02-05 18:25:00.859][0] [LGE VIBRATOR] qpnp_hap_play play : 1 voltage : 2088
- <6>[ 18.054067 / 02-05 18:25:00.859][0] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 18.133274 / 02-05 18:25:00.939][0] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 18.958743 / 02-05 18:25:01.769][3] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=82, cal_value=227
- <4>[ 18.958998 / 02-05 18:25:01.769][2]
- <4>[ 18.958998 / 02-05 18:25:01.769][2] Dongle Host Driver, version 1.201.54.8 (r)
- <4>[ 18.958998 / 02-05 18:25:01.769][2] Compiled in drivers/net/wireless/bcmdhd on Feb 1 2016 at 11:06:24
- <4>[ 18.959024 / 02-05 18:25:01.769][2] wl_android_wifi_on in
- <4>[ 18.959036 / 02-05 18:25:01.769][2] wifi_platform_set_power = 1
- <6>[ 18.959093 / 02-05 18:25:01.769][0] mmc2: slot status change detected (0 -> 1), GPIO_ACTIVE_HIGH
- <6>[ 18.959137 / 02-05 18:25:01.769][3] [LGE][MMC][mmc_rescan ( ) START!] mmc2
- <6>[ 19.047150 / 02-05 18:25:01.849][1] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=80, cal_value=215
- <6>[ 19.063787 / 02-05 18:25:01.869][0] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=77, cal_value=197
- <6>[ 19.080713 / 02-05 18:25:01.889][2] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=74, cal_value=179
- <6>[ 19.097596 / 02-05 18:25:01.899][2] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=70, cal_value=161
- <3>[ 19.109071 / 02-05 18:25:01.919][5] bcm_wifi_set_power: wifi power successed to pull up
- <6>[ 19.114311 / 02-05 18:25:01.919][3] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=67, cal_value=149
- <6>[ 19.131186 / 02-05 18:25:01.939][2] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=66, cal_value=145
- <6>[ 19.195938 / 02-05 18:25:01.999][1] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 11
- <4>[ 19.202877 / 02-05 18:25:02.009][0] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2
- <4>[ 19.203762 / 02-05 18:25:02.009][0] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000
- <4>[ 19.204068 / 02-05 18:25:02.009][0] dhdsdio_download_firmware: firmware path=/system/etc/firmware/fw_bcmdhd.bin, nvram path=/system/etc/wifi/bcmdhd.cal
- <6>[ 19.454093 / 02-05 18:25:02.259][1] [FS] mmc1: sdhci_msm_execute_tuning: finally setting the tuning phase to 4
- <4>[ 19.549748 / 02-05 18:25:02.359][1] audit: audit_lost=67 audit_rate_limit=20 audit_backlog_limit=64
- <3>[ 19.550114 / 02-05 18:25:02.359][1] audit: rate limit exceeded
- <6>[ 19.590899 / 02-05 18:25:02.399][3] mtp_open
- <4>[ 19.688281 / 02-05 18:25:02.489][5] sdioh_request_buffer: [1] doing memory copy buf=ffffffc0ba54c000, len=2011
- <4>[ 19.693377 / 02-05 18:25:02.499][5] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
- <4>[ 19.780858 / 02-05 18:25:02.589][5] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
- <4>[ 19.782197 / 02-05 18:25:02.589][5] wifi_platform_get_mac_addr
- <4>[ 19.785104 / 02-05 18:25:02.589][5] Firmware up: op_mode=0x0005, MAC=00:90:4c:1f:3a:0e
- <4>[ 19.795781 / 02-05 18:25:02.599][5] dhd_wl_ioctl: WLC_SET_VAR: txbf, ret = -23
- <4>[ 19.795791 / 02-05 18:25:02.599][5] dhd_preinit_ioctls Set txbf failed -23
- <4>[ 19.800191 / 02-05 18:25:02.609][5] dhd_wl_ioctl: WLC_SET_VAR: pspretend_threshold, ret = -23
- <4>[ 19.800203 / 02-05 18:25:02.609][5] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23
- <4>[ 19.817496 / 02-05 18:25:02.619][5] Firmware version = wl0: Sep 5 2015 02:05:46 version 7.45.60.9 (C0 Station/P2P feature) FWID 01-407030d0
- <4>[ 19.821878 / 02-05 18:25:02.629][5] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
- <4>[ 19.822954 / 02-05 18:25:02.629][5] dhd_wl_ioctl: WLC_GET_VAR: pfnlbest, ret = -14
- <4>[ 19.824324 / 02-05 18:25:02.629][5] dhd_preinit_config : config path : /data/misc/wifi/config
- <4>[ 19.824356 / 02-05 18:25:02.629][5] dhd_preinit_proc: Change Macaddr = 64:BC:0C:80:AF:81
- <6>[ 20.132842 / 02-05 18:25:02.939][1] CFGP2P-INFO2) wl_cfgp2p_add_p2p_disc_if : P2P interface registered
- <6>[ 20.134538 / 02-05 18:25:02.939][2] evrc_in_open:session id 1: NT mode encoder success
- <6>[ 20.134559 / 02-05 18:25:02.939][2] evrc_in_open:session id 1: success
- <6>[ 20.137149 / 02-05 18:25:02.939][0] audio_in_release: session id 1
- <6>[ 20.151633 / 02-05 18:25:02.959][1] qcelp_in_open:session id 1: NT mode encoder success
- <6>[ 20.151654 / 02-05 18:25:02.959][1] qcelp_in_open:session id 1: success
- <6>[ 20.159381 / 02-05 18:25:02.969][1] audio_in_release: session id 1
- <4>[ 20.161728 / 02-05 18:25:02.969][0] WLC_E_IF: NO_IF set, event Ignored
- <6>[ 20.175539 / 02-05 18:25:02.979][3] msm_vidc: info: Opening video instance: ffffffc0d4d9e000, 0
- <6>[ 20.185320 / 02-05 18:25:02.989][1] subsys-pil-tz fdce0000.qcom,venus: venus: loading from 0x0000000008800000 to 0x0000000008d00000
- <5>[ 20.218969 / 02-05 18:25:03.029][1] pet_watchdog
- <6>[ 20.274824 / 02-05 18:25:03.079][1] subsys-pil-tz fdce0000.qcom,venus: venus: Brought out of reset
- <6>[ 20.303500 / 02-05 18:25:03.109][2] msm_vidc: info: Closed video instance: ffffffc0d4d9e000
- <6>[ 20.305242 / 02-05 18:25:03.109][2] msm_vidc: info: Opening video instance: ffffffc0ba7ee000, 0
- <6>[ 20.308940 / 02-05 18:25:03.119][0] msm_vidc: info: Closed video instance: ffffffc0ba7ee000
- <6>[ 20.310225 / 02-05 18:25:03.119][1] msm_vidc: info: Opening video instance: ffffffc0d0a1e000, 0
- <6>[ 20.315357 / 02-05 18:25:03.119][0] msm_vidc: info: Closed video instance: ffffffc0d0a1e000
- <6>[ 20.316459 / 02-05 18:25:03.119][1] msm_vidc: info: Opening video instance: ffffffc0d0a1e000, 0
- <6>[ 20.320101 / 02-05 18:25:03.129][0] msm_vidc: info: Closed video instance: ffffffc0d0a1e000
- <6>[ 20.332974 / 02-05 18:25:03.139][0] audio_open:wmadec success mode[1]session[1]
- <6>[ 20.341557 / 02-05 18:25:03.149][3] audio_open:wmapro decoder open success, session_id = 1
- <6>[ 20.349847 / 02-05 18:25:03.159][0] audio_open:wmapro decoder open success, session_id = 1
- <6>[ 20.444606 / 02-05 18:25:03.249][1] msm_vidc: info: Opening video instance: ffffffc0d0a1e000, 1
- <6>[ 20.455901 / 02-05 18:25:03.259][2] msm_vidc: info: Closed video instance: ffffffc0d0a1e000
- <6>[ 20.457617 / 02-05 18:25:03.259][2] msm_vidc: info: Opening video instance: ffffffc0a7fde000, 1
- <6>[ 20.475175 / 02-05 18:25:03.279][2] msm_vidc: info: Closed video instance: ffffffc0a7fde000
- <6>[ 20.476951 / 02-05 18:25:03.279][2] msm_vidc: info: Opening video instance: ffffffc0d0a18000, 1
- <6>[ 20.484978 / 02-05 18:25:03.289][5] msm_vidc: info: Closed video instance: ffffffc0d0a18000
- <6>[ 20.486824 / 02-05 18:25:03.289][3] msm_vidc: info: Opening video instance: ffffffc0d4d9c000, 1
- <6>[ 20.494376 / 02-05 18:25:03.299][4] msm_vidc: info: Closed video instance: ffffffc0d4d9c000
- <6>[ 20.496359 / 02-05 18:25:03.299][2] msm_vidc: info: Opening video instance: ffffffc0a7fda000, 1
- <6>[ 20.501868 / 02-05 18:25:03.309][2] msm_vidc: info: Closed video instance: ffffffc0a7fda000
- <6>[ 20.503124 / 02-05 18:25:03.309][3] msm_vidc: info: Opening video instance: ffffffc0a76fe000, 1
- <6>[ 20.512810 / 02-05 18:25:03.319][1] msm_vidc: info: Closed video instance: ffffffc0a76fe000
- <6>[ 20.514489 / 02-05 18:25:03.319][1] msm_vidc: info: Opening video instance: ffffffc0a6c4c000, 1
- <6>[ 20.518967 / 02-05 18:25:03.329][0] msm_vidc: info: Closed video instance: ffffffc0a6c4c000
- <6>[ 20.520118 / 02-05 18:25:03.329][2] msm_vidc: info: Opening video instance: ffffffc0a7632000, 1
- <6>[ 20.529147 / 02-05 18:25:03.339][3] msm_vidc: info: Closed video instance: ffffffc0a7632000
- <6>[ 20.530653 / 02-05 18:25:03.339][3] msm_vidc: info: Opening video instance: ffffffc0a6cac000, 1
- <6>[ 20.540678 / 02-05 18:25:03.349][3] SELinux: Context u:object_r:multimedia_data_file:s0 is not valid (left unmapped).
- <6>[ 20.549449 / 02-05 18:25:03.359][3] msm_vidc: info: Closed video instance: ffffffc0a6cac000
- <6>[ 20.550720 / 02-05 18:25:03.359][3] msm_vidc: info: Opening video instance: ffffffc0a7636000, 1
- <6>[ 20.556356 / 02-05 18:25:03.359][5] msm_vidc: info: Closed video instance: ffffffc0a7636000
- <6>[ 20.559904 / 02-05 18:25:03.369][3] msm_vidc: info: Opening video instance: ffffffc0a6caa000, 1
- <6>[ 20.570517 / 02-05 18:25:03.379][3] msm_vidc: info: Closed video instance: ffffffc0a6caa000
- <6>[ 20.574128 / 02-05 18:25:03.379][0] msm_vidc: info: Opening video instance: ffffffc0da554000, 1
- <6>[ 20.581347 / 02-05 18:25:03.389][1] msm_vidc: info: Closed video instance: ffffffc0da554000
- <6>[ 20.583464 / 02-05 18:25:03.389][1] msm_vidc: info: Opening video instance: ffffffc0a76fa000, 1
- <4>[ 20.589425 / 02-05 18:25:03.399][1] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- <7>[ 20.589502 / 02-05 18:25:03.399][1] SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
- <6>[ 20.595630 / 02-05 18:25:03.399][1] msm_vidc: info: Closed video instance: ffffffc0a76fa000
- <6>[ 20.597421 / 02-05 18:25:03.399][1] msm_vidc: info: Opening video instance: ffffffc0da556000, 1
- <6>[ 20.608075 / 02-05 18:25:03.409][0] msm_vidc: info: Closed video instance: ffffffc0da556000
- <6>[ 20.621450 / 02-05 18:25:03.429][1] CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
- <4>[ 20.622961 / 02-05 18:25:03.429][2] dhd_set_suspend: Remove extra suspend setting
- <7>[ 20.756761 / 02-05 18:25:03.559][0] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
- <12>[ 21.805500 / 02-05 18:25:04.609][0] avc: granted { set } for property=net.cdma.ruim.operator.numeric scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
- <6>[ 22.213582 / 02-05 18:25:05.019][2] msm_thermal:store_cc_enabled Core control disabled
- <6>[ 22.214922 / 02-05 18:25:05.019][2] mode_store: bcl disabled
- <12>[ 22.222345 / 02-05 18:25:05.029][2] healthd: charger_controller: Unknown power supply type
- <6>[ 22.223164 / 02-05 18:25:05.029][2] hotplug_mask_store: bcl hotplug mask updated to 0
- <6>[ 22.227366 / 02-05 18:25:05.029][0] hotplug_soc_mask_store: bcl soc hotplug mask updated to 0
- <6>[ 22.228821 / 02-05 18:25:05.039][0] mode_store: bcl enabled
- <4>[ 22.230421 / 02-05 18:25:05.039][5] IRQ32 no longer affine to CPU5
- <4>[ 22.230438 / 02-05 18:25:05.039][5] IRQ33 no longer affine to CPU5
- <4>[ 22.230448 / 02-05 18:25:05.039][5] IRQ34 no longer affine to CPU5
- <4>[ 22.230458 / 02-05 18:25:05.039][5] IRQ36 no longer affine to CPU5
- <4>[ 22.230467 / 02-05 18:25:05.039][5] IRQ37 no longer affine to CPU5
- <4>[ 22.230476 / 02-05 18:25:05.039][5] IRQ38 no longer affine to CPU5
- <4>[ 22.230484 / 02-05 18:25:05.039][5] IRQ39 no longer affine to CPU5
- <4>[ 22.230493 / 02-05 18:25:05.039][5] IRQ41 no longer affine to CPU5
- <4>[ 22.230501 / 02-05 18:25:05.039][5] IRQ42 no longer affine to CPU5
- <4>[ 22.230509 / 02-05 18:25:05.039][5] IRQ43 no longer affine to CPU5
- <5>[ 22.231439 / 02-05 18:25:05.039][0] CPU5: shutdown
- <12>[ 22.240032 / 02-05 18:25:05.049][0] healthd: charger_controller: Unknown power supply type
- <5>[ 22.240437 / 02-05 18:25:05.049][5] CPU5: Booted secondary processor
- <12>[ 22.243289 / 02-05 18:25:05.049][1] healthd: charger_controller: Unknown power supply type
- <6>[ 22.245122 / 02-05 18:25:05.049][0] msm_thermal:store_cc_enabled Core control enabled
- <6>[ 22.258031 / 02-05 18:25:05.059][0] mode_store: bcl disabled
- <6>[ 22.259814 / 02-05 18:25:05.069][0] hotplug_mask_store: bcl hotplug mask updated to 0
- <6>[ 22.260652 / 02-05 18:25:05.069][0] hotplug_soc_mask_store: bcl soc hotplug mask updated to 0
- <12>[ 22.261328 / 02-05 18:25:05.069][2] healthd: charger_controller: Unknown power supply type
- <6>[ 22.264747 / 02-05 18:25:05.069][0] mode_store: bcl enabled
- <12>[ 22.264985 / 02-05 18:25:05.069][2] healthd: charger_controller: Unknown power supply type
- <12>[ 22.277186 / 02-05 18:25:05.079][2] healthd: charger_controller: Unknown power supply type
- <3>[ 22.492851 / 02-05 18:25:05.299][2] devbw qcom,cpubw.27: dev_pm_opp_get_opp_count: device OPP not found (-19)
- <6>[ 23.357262 / 02-05 18:25:06.159][3] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=67, cal_value=149
- <6>[ 23.390498 / 02-05 18:25:06.199][1] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=68, cal_value=153
- <6>[ 23.406989 / 02-05 18:25:06.209][2] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=69, cal_value=157
- <6>[ 23.440174 / 02-05 18:25:06.249][1] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=70, cal_value=161
- <6>[ 23.457006 / 02-05 18:25:06.259][3] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=71, cal_value=165
- <6>[ 23.558733 / 02-05 18:25:06.369][2] msm_perf: IO changed to 1
- <12>[ 22.143816 / 02-05 18:25:06.379][3] Boot completed
- <6>[ 23.578075 / 02-05 18:25:06.379][3] CFG80211-TRACE) wl_escan_handler : SCAN COMPLETED: scanned AP count=8
- <6>[ 24.319773 / 02-05 18:25:07.129][1] [Touch] 1 finger pressed:<0>( 724,2240, 46)
- <6>[ 24.386646 / 02-05 18:25:07.189][1] [Touch] finger released:<0>( 724,2240, 45)
- <6>[ 24.397418 / 02-05 18:25:07.199][1] [LGE VIBRATOR] qpnp_hap_play play : 1 voltage : 2088
- <6>[ 24.407425 / 02-05 18:25:07.209][1] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 24.460223 / 02-05 18:25:07.269][1] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 24.521091 / 02-05 18:25:07.329][1] [Touch] 1 finger pressed:<0>( 768,2229, 44)
- <6>[ 24.587966 / 02-05 18:25:07.389][1] [Touch] finger released:<0>( 768,2229, 44)
- <6>[ 24.591902 / 02-05 18:25:07.399][1] [LGE VIBRATOR] qpnp_hap_play play : 1 voltage : 2088
- <6>[ 24.602034 / 02-05 18:25:07.409][1] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 24.654819 / 02-05 18:25:07.459][1] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 24.688627 / 02-05 18:25:07.489][1] [Touch] 1 finger pressed:<0>( 772,2240, 45)
- <6>[ 24.755747 / 02-05 18:25:07.559][1] [Touch] finger released:<0>( 772,2240, 48)
- <6>[ 24.759636 / 02-05 18:25:07.569][0] [LGE VIBRATOR] qpnp_hap_play play : 1 voltage : 2088
- <6>[ 24.769630 / 02-05 18:25:07.579][0] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 24.798707 / 02-05 18:25:07.609][0] msm_perf: IO changed to 0
- <6>[ 24.822487 / 02-05 18:25:07.629][0] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 24.861829 / 02-05 18:25:07.669][0] msm8994_quat_mi2s_snd_startup: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0 bit width =2 sample rate =48000
- <6>[ 25.359332 / 02-05 18:25:08.169][1] [Touch] 1 finger pressed:<0>( 767,2254, 46)
- <6>[ 25.426128 / 02-05 18:25:08.229][0] [Touch] finger released:<0>( 767,2254, 46)
- <6>[ 25.430626 / 02-05 18:25:08.239][2] [LGE VIBRATOR] qpnp_hap_play play : 1 voltage : 2088
- <6>[ 25.440650 / 02-05 18:25:08.249][2] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 25.494359 / 02-05 18:25:08.299][2] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 25.644264 / 02-05 18:25:08.449][1] [Touch] 1 finger pressed:<0>(1074,2240, 48)
- <6>[ 25.694622 / 02-05 18:25:08.499][1] [Touch] finger released:<0>(1074,2240, 48)
- <6>[ 25.699180 / 02-05 18:25:08.509][2] [LGE VIBRATOR] qpnp_hap_play play : 1 voltage : 2088
- <6>[ 25.709177 / 02-05 18:25:08.519][2] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 25.765179 / 02-05 18:25:08.569][2] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 28.875269 / 02-05 18:25:11.679][2] msm8994_quat_mi2s_snd_shutdown: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0
- <6>[ 30.035782 / 02-05 18:25:12.839][1] [Touch] 1 finger pressed:<0>( 878,1490, 45)
- <6>[ 30.102386 / 02-05 18:25:12.909][1] [Touch] finger released:<0>( 878,1490, 44)
- <6>[ 30.134259 / 02-05 18:25:12.939][0] msm8994_quat_mi2s_snd_startup: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0 bit width =2 sample rate =48000
- <5>[ 30.238787 / 02-05 18:25:13.049][1] pet_watchdog
- <6>[ 28.897485 / 02-05 18:25:13.449][0] msm8994_quat_mi2s_snd_shutdown Quaternary MI2S Clock is Disabled
- <6>[ 30.646090 / 02-05 18:25:13.449][0] CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
- <6>[ 30.655612 / 02-05 18:25:13.459][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 31.539787 / 02-05 18:25:14.349][1] [MAX17050] [MAX17050_PRINT_INFO]=F_cap=2902,recap=1580,Ibatt=487,Iavg=531,Empty=168,Vbatt=3831,OCV=3878,SoC=57,AfterSoCRep=578,Raw=544,AfterSocVF=582,Raw=548,Rcomp0=0x3B,temp=29,learn=0x2633
- <6>[ 31.544133 / 02-05 18:25:14.349][0] [Touch] 1 finger pressed:<0>( 755,1685, 42)
- <6>[ 31.594505 / 02-05 18:25:14.399][1] [Touch] finger released:<0>( 755,1685, 47)
- <6>[ 32.800916 / 02-05 18:25:15.609][1] [Touch] 1 finger pressed:<0>( 867,1515, 45)
- <6>[ 32.884585 / 02-05 18:25:15.689][1] [Touch] finger released:<0>( 874,1515, 43)
- <6>[ 33.270354 / 02-05 18:25:16.079][1] [Touch] 1 finger pressed:<0>(1224,1709, 41)
- <6>[ 33.337577 / 02-05 18:25:16.139][1] [Touch] finger released:<0>(1224,1709, 47)
- <6>[ 34.251228 / 02-05 18:25:17.059][0] CFG80211-TRACE) wl_escan_handler : SCAN COMPLETED: scanned AP count=9
- <6>[ 34.363137 / 02-05 18:25:17.169][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <4>[ 34.368135 / 02-05 18:25:17.169][1] dhd_wl_ioctl: WLC_IOCTL: cmd: 23, ret = -17
- <6>[ 34.411508 / 02-05 18:25:17.219][1] CFG80211-INFO2) wl_cfg80211_connect : Connectting witha0:1b:29:b8:4d:f2 channel (11) ssid "NUMERICABLE-6FC3", len (16)
- <6>[ 34.411508 / 02-05 18:25:17.219][1]
- <4>[ 34.464495 / 02-05 18:25:17.269][0] wl_bss_connect_done succeeded with a0:1b:29:b8:4d:f2
- <4>[ 34.465410 / 02-05 18:25:17.269][0] ETHER_TYPE_802_1X [RX]: ver 1, type 3, replay 1
- <4>[ 34.475051 / 02-05 18:25:17.279][0] dhdcdc_set_ioctl: SET PM to 0
- <6>[ 34.476734 / 02-05 18:25:17.279][0] cfg80211: Calling CRDA for country: FR
- <6>[ 34.477293 / 02-05 18:25:17.279][0] cfg80211: Regulatory domain changed to country: FR
- <6>[ 34.477339 / 02-05 18:25:17.279][0] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- <6>[ 34.477379 / 02-05 18:25:17.279][0] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- <6>[ 34.477418 / 02-05 18:25:17.279][0] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
- <6>[ 34.477456 / 02-05 18:25:17.279][0] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
- <6>[ 34.477494 / 02-05 18:25:17.279][0] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm)
- <6>[ 34.477532 / 02-05 18:25:17.279][0] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- <4>[ 34.482195 / 02-05 18:25:17.289][0] wl_bss_connect_done succeeded with a0:1b:29:b8:4d:f2
- <4>[ 34.495577 / 02-05 18:25:17.299][0] ETHER_TYPE_802_1X [RX]: ver 1, type 3, replay 2
- <4>[ 34.543437 / 02-05 18:25:17.349][2] dhd_set_suspend: Remove extra suspend setting
- <4>[ 34.551856 / 02-05 18:25:17.359][0] dhdcdc_set_ioctl: SET PM to 0
- <6>[ 34.553151 / 02-05 18:25:17.359][0] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : DHCP session starts
- <4>[ 34.638941 / 02-05 18:25:17.449][0] dhd_pno_get_for_batch: Batching SCAN mode is not enabled
- <4>[ 34.640570 / 02-05 18:25:17.449][0] dhd_pno_stop_for_batch : PNO BATCH MODE is not enabled
- <4>[ 34.640635 / 02-05 18:25:17.449][0] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL
- <4>[ 34.640671 / 02-05 18:25:17.449][0] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL
- <6>[ 35.041686 / 02-05 18:25:17.849][1] [CC] current batt_temp[29], batt_temp_state[0], current batt_volt[3893], batt_volt_state[0]
- <6>[ 35.451896 / 02-05 18:25:18.259][1] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : DHCP is complete
- <4>[ 35.462554 / 02-05 18:25:18.269][0] dhdcdc_set_ioctl: SET PM to 2
- <6>[ 36.510371 / 02-05 18:25:19.967][2] msm8994_quat_mi2s_snd_shutdown: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0
- <6>[ 39.391795 / 02-05 18:25:22.847][3] BluetoothAdapte[5682]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x83000006
- <1>[ 39.391819 / 02-05 18:25:22.847][3] pgd = ffffffc094485000
- <6>[ 36.532812 / 02-05 18:25:22.847][3] msm8994_quat_mi2s_snd_shutdown Quaternary MI2S Clock is Disabled
- <1>[ 39.391830 / 02-05 18:25:22.847][3] [00000000] *pgd=0000000094486003, *pmd=0000000000000000
- <4>[ 39.391847 / 02-05 18:25:22.847][3]
- <4>[ 39.391861 / 02-05 18:25:22.847][3] CPU: 3 PID: 5682 Comm: BluetoothAdapte Not tainted 3.10.49-gf53c0f6 #1
- <4>[ 39.391873 / 02-05 18:25:22.847][3] task: ffffffc0b2065200 ti: ffffffc0939a8000 task.ti: ffffffc0939a8000
- <4>[ 39.391885 / 02-05 18:25:22.847][3] PC is at 0x0
- <4>[ 39.391894 / 02-05 18:25:22.847][3] LR is at 0xef2011cb
- <4>[ 39.391905 / 02-05 18:25:22.847][3] pc : [<0000000000000000>] lr : [<00000000ef2011cb>] pstate: 600e0010
- <4>[ 39.391915 / 02-05 18:25:22.847][3] sp : 00000000ef1059b8
- <4>[ 39.391924 / 02-05 18:25:22.847][3] x12: 00000000f6e85301
- <4>[ 39.391934 / 02-05 18:25:22.847][3] x11: 0000000012d814a0 x10: 0000000000000000
- <4>[ 39.391946 / 02-05 18:25:22.847][3] x9 : 00000000f49f4000 x8 : 0000000012d57b00
- <4>[ 39.391958 / 02-05 18:25:22.847][3] x7 : 0000000000000000 x6 : 00000000f365e12a
- <4>[ 39.391980 / 02-05 18:25:22.847][3] x5 : 00000000000102e8 x4 : 00000000eec28ac0
- <4>[ 39.391993 / 02-05 18:25:22.847][3] x3 : 00000000ef266380 x2 : 00000000ef255674
- <4>[ 39.392005 / 02-05 18:25:22.847][3] x1 : 0000000000000000 x0 : 00000000f3611dc8
- <4>[ 39.392016 / 02-05 18:25:22.847][3]
- <6>[ 39.544603 / 02-05 18:25:22.997][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 39.582888 / 02-05 18:25:23.037][0] FG: update_temp_data: batt temp was changed !! 290 => 304
- <5>[ 40.271611 / 02-05 18:25:23.727][1] pet_watchdog
- <6>[ 43.565538 / 02-05 18:25:27.017][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 46.619805 / 02-05 18:25:30.077][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 49.650814 / 02-05 18:25:33.107][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <5>[ 50.282780 / 02-05 18:25:33.737][1] pet_watchdog
- <6>[ 50.527097 / 02-05 18:25:33.987][1] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=72, cal_value=169
- <6>[ 50.543187 / 02-05 18:25:33.997][1] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=73, cal_value=173
- <6>[ 50.576322 / 02-05 18:25:34.027][1] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=74, cal_value=179
- <6>[ 51.621738 / 02-05 18:25:35.077][1] [MAX17050] [MAX17050_PRINT_INFO]=F_cap=2902,recap=1580,Ibatt=-358,Iavg=-117,Empty=6143,Vbatt=3922,OCV=3878,SoC=57,AfterSoCRep=578,Raw=544,AfterSocVF=582,Raw=548,Rcomp0=0x3B,temp=29,learn=0x2633
- <6>[ 52.623986 / 02-05 18:25:36.077][3] BluetoothAdapte[6936]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x83000006
- <1>[ 52.624042 / 02-05 18:25:36.077][3] pgd = ffffffc099ebd000
- <1>[ 52.624076 / 02-05 18:25:36.077][3] [00000000] *pgd=0000000099ebe003, *pmd=0000000000000000
- <4>[ 52.624128 / 02-05 18:25:36.077][3]
- <4>[ 52.624172 / 02-05 18:25:36.077][3] CPU: 3 PID: 6936 Comm: BluetoothAdapte Not tainted 3.10.49-gf53c0f6 #1
- <4>[ 52.624209 / 02-05 18:25:36.077][3] task: ffffffc08fabd200 ti: ffffffc082050000 task.ti: ffffffc082050000
- <4>[ 52.624245 / 02-05 18:25:36.077][3] PC is at 0x0
- <4>[ 52.624277 / 02-05 18:25:36.077][3] LR is at 0xef2011cb
- <4>[ 52.624311 / 02-05 18:25:36.077][3] pc : [<0000000000000000>] lr : [<00000000ef2011cb>] pstate: 600e0010
- <4>[ 52.624343 / 02-05 18:25:36.077][3] sp : 00000000ef1059b8
- <4>[ 52.624374 / 02-05 18:25:36.077][3] x12: 00000000f6e85301
- <4>[ 52.624402 / 02-05 18:25:36.077][3] x11: 0000000012d86480 x10: 0000000000000000
- <4>[ 52.624440 / 02-05 18:25:36.077][3] x9 : 00000000f49f4000 x8 : 0000000012d57ae0
- <4>[ 52.624477 / 02-05 18:25:36.077][3] x7 : 0000000000000000 x6 : 00000000f365e12a
- <4>[ 52.624512 / 02-05 18:25:36.077][3] x5 : 00000000000102e8 x4 : 00000000eec28ac0
- <4>[ 52.624548 / 02-05 18:25:36.077][3] x3 : 00000000ef266380 x2 : 00000000ef255674
- <4>[ 52.624584 / 02-05 18:25:36.077][3] x1 : 0000000000000000 x0 : 00000000f3611dc8
- <4>[ 52.624617 / 02-05 18:25:36.077][3]
- <6>[ 52.676258 / 02-05 18:25:36.127][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 54.528582 / 02-05 18:25:37.977][3] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=75, cal_value=185
- <6>[ 54.563547 / 02-05 18:25:38.017][3] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=76, cal_value=191
- <6>[ 55.500938 / 02-05 18:25:38.957][0] CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
- <6>[ 55.514151 / 02-05 18:25:38.967][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 11
- <4>[ 55.520214 / 02-05 18:25:38.977][0] dhdcdc_set_ioctl: SET PM to 2
- <6>[ 59.175554 / 02-05 18:25:42.627][0] CFG80211-TRACE) wl_escan_handler : SCAN COMPLETED: scanned AP count=6
- <5>[ 60.302286 / 02-05 18:25:43.757][1] pet_watchdog
- <6>[ 61.741143 / 02-05 18:25:45.197][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 61.760743 / 02-05 18:25:45.217][0] [XO_THERM] Result:35 Raw:31736
- <6>[ 61.762160 / 02-05 18:25:45.217][0] [BOARD_THERM] Result:296 Raw:36765
- <6>[ 61.762197 / 02-05 18:25:45.217][0] [VS_THERM] Result:321
- <6>[ 62.244317 / 02-05 18:25:45.697][1] [CC] [C], USB_PRESENT, WIRELESS_PRESENT, USB_TYPE, CABLE_INFO, USBIN_VOL, BATT_FAKE, BATT_TEMP, BATT_SOC, BATT_VOL, PMI_IUSB_SET, PMI_IUSB_AICL, PMI_IBAT_SET, TOTAL_IBAT_NOW
- <6>[ 62.244414 / 02-05 18:25:45.697][1] [CC] [I], 1, 0, USB, OPEN, 4956, FAKE_OFF, 30, 57, 3924, 500, 0, 2000, 134
- <6>[ 62.248434 / 02-05 18:25:45.697][1] [CC] charge_type = 3
- <12>[ 62.259998 / 02-05 18:25:45.717][1] healthd: charger_controller: Unknown power supply type
- <6>[ 64.770536 / 02-05 18:25:48.227][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 65.120714 / 02-05 18:25:48.577][1] [CC] current batt_temp[30], batt_temp_state[0], current batt_volt[3921], batt_volt_state[0]
- <6>[ 65.676921 / 02-05 18:25:49.127][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 65.708567 / 02-05 18:25:49.157][2] BluetoothAdapte[6994]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x83000006
- <1>[ 65.708590 / 02-05 18:25:49.157][2] pgd = ffffffc0820d3000
- <1>[ 65.708601 / 02-05 18:25:49.157][2] [00000000] *pgd=000000008340f003, *pmd=0000000000000000
- <4>[ 65.708613 / 02-05 18:25:49.157][2]
- <4>[ 65.708628 / 02-05 18:25:49.157][2] CPU: 2 PID: 6994 Comm: BluetoothAdapte Not tainted 3.10.49-gf53c0f6 #1
- <4>[ 65.708639 / 02-05 18:25:49.157][2] task: ffffffc08fa60000 ti: ffffffc082018000 task.ti: ffffffc082018000
- <4>[ 65.708651 / 02-05 18:25:49.157][2] PC is at 0x0
- <4>[ 65.708660 / 02-05 18:25:49.157][2] LR is at 0xef2011cb
- <4>[ 65.708717 / 02-05 18:25:49.167][2] pc : [<0000000000000000>] lr : [<00000000ef2011cb>] pstate: 600e0010
- <4>[ 65.708727 / 02-05 18:25:49.167][2] sp : 00000000ef1059b8
- <4>[ 65.708736 / 02-05 18:25:49.167][2] x12: 00000000f6e85301
- <4>[ 65.708746 / 02-05 18:25:49.167][2] x11: 0000000012d844a0 x10: 0000000000000000
- <4>[ 65.708757 / 02-05 18:25:49.167][2] x9 : 00000000f49f4000 x8 : 0000000012d57ae0
- <4>[ 65.708769 / 02-05 18:25:49.167][2] x7 : 0000000000000000 x6 : 00000000f365e12a
- <4>[ 65.708780 / 02-05 18:25:49.167][2] x5 : 00000000000102e8 x4 : 00000000eec28ac0
- <4>[ 65.708792 / 02-05 18:25:49.167][2] x3 : 00000000ef266380 x2 : 00000000ef255674
- <4>[ 65.708803 / 02-05 18:25:49.167][2] x1 : 0000000000000000 x0 : 00000000f3611dc8
- <4>[ 65.708814 / 02-05 18:25:49.167][2]
- <5>[ 70.322191 / 02-05 18:25:53.777][1] pet_watchdog
- <6>[ 70.817571 / 02-05 18:25:54.267][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 71.512022 / 02-05 18:25:54.967][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 71.700734 / 02-05 18:25:55.157][1] [MAX17050] [MAX17050_PRINT_INFO]=F_cap=2902,recap=1581,Ibatt=-211,Iavg=-216,Empty=6143,Vbatt=3913,OCV=3878,SoC=57,AfterSoCRep=578,Raw=544,AfterSocVF=582,Raw=548,Rcomp0=0x3B,temp=30,learn=0x2633
- <6>[ 73.290634 / 02-05 18:25:56.747][1] [Touch] 1 finger pressed:<0>(1226,1526, 45)
- <6>[ 73.372650 / 02-05 18:25:56.827][3] [Touch] finger released:<0>(1232,1533, 49)
- <6>[ 73.419655 / 02-05 18:25:56.877][0] msm8994_quat_mi2s_snd_startup: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0 bit width =2 sample rate =48000
- <6>[ 73.839582 / 02-05 18:25:57.297][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 75.016839 / 02-05 18:25:58.467][1] [Touch] 1 finger pressed:<0>(1286,1555, 47)
- <6>[ 75.066088 / 02-05 18:25:58.517][1] [Touch] finger released:<0>(1286,1555, 45)
- <6>[ 75.505731 / 02-05 18:25:58.957][0] CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
- <6>[ 75.518378 / 02-05 18:25:58.967][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 75.635801 / 02-05 18:25:59.087][1] [Touch] 1 finger pressed:<0>( 729,2401, 46)
- <6>[ 75.642738 / 02-05 18:25:59.097][2] [LGE VIBRATOR] qpnp_hap_play play : 1 voltage : 2088
- <6>[ 75.652731 / 02-05 18:25:59.107][2] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 75.701575 / 02-05 18:25:59.157][1] [Touch] finger released:<0>( 730,2400, 43)
- <6>[ 75.705830 / 02-05 18:25:59.157][2] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 75.729664 / 02-05 18:25:59.187][0] CFG80211-TRACE) wl_escan_handler : SCAN COMPLETED: scanned AP count=1
- <6>[ 76.858147 / 02-05 18:26:00.307][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 77.143323 / 02-05 18:26:00.597][1] [Touch] 1 finger pressed:<0>( 186,1232, 46)
- <6>[ 77.209514 / 02-05 18:26:00.667][1] [Touch] finger released:<0>( 186,1232, 44)
- <6>[ 78.483721 / 02-05 18:26:01.937][2] [Touch] 1 finger pressed:<0>( 962,1826, 42)
- <6>[ 78.542568 / 02-05 18:26:01.997][2] BluetoothAdapte[7060]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x83000006
- <1>[ 78.542595 / 02-05 18:26:01.997][2] pgd = ffffffc082bc8000
- <1>[ 78.542607 / 02-05 18:26:01.997][2] [00000000] *pgd=0000000082bc7003, *pmd=0000000000000000
- <4>[ 78.542622 / 02-05 18:26:01.997][2]
- <4>[ 78.542638 / 02-05 18:26:01.997][2] CPU: 2 PID: 7060 Comm: BluetoothAdapte Not tainted 3.10.49-gf53c0f6 #1
- <4>[ 78.542652 / 02-05 18:26:01.997][2] task: ffffffc0820edc40 ti: ffffffc096290000 task.ti: ffffffc096290000
- <4>[ 78.542665 / 02-05 18:26:01.997][2] PC is at 0x0
- <4>[ 78.542676 / 02-05 18:26:01.997][2] LR is at 0xef2011cb
- <4>[ 78.542688 / 02-05 18:26:01.997][2] pc : [<0000000000000000>] lr : [<00000000ef2011cb>] pstate: 600e0010
- <4>[ 78.542698 / 02-05 18:26:01.997][2] sp : 00000000ef1059b8
- <4>[ 78.542709 / 02-05 18:26:01.997][2] x12: 00000000f6e85301
- <4>[ 78.542719 / 02-05 18:26:01.997][2] x11: 0000000012d8c4a0 x10: 0000000000000000
- <4>[ 78.542733 / 02-05 18:26:01.997][2] x9 : 00000000f49f4000 x8 : 0000000012d58a60
- <4>[ 78.542748 / 02-05 18:26:01.997][2] x7 : 0000000000000000 x6 : 00000000f365e12a
- <4>[ 78.542761 / 02-05 18:26:01.997][2] x5 : 00000000000102e8 x4 : 00000000eec28ac0
- <4>[ 78.542775 / 02-05 18:26:01.997][2] x3 : 00000000ef266380 x2 : 00000000ef255674
- <4>[ 78.542788 / 02-05 18:26:01.997][2] x1 : 0000000000000000 x0 : 00000000f3611dc8
- <4>[ 78.542802 / 02-05 18:26:01.997][2]
- <6>[ 78.600830 / 02-05 18:26:02.057][1] [Touch] finger released:<0>( 965,1826, 44)
- <5>[ 80.338970 / 02-05 18:26:03.797][1] pet_watchdog
- <6>[ 81.067483 / 02-05 18:26:04.517][1] [Touch] 1 finger pressed:<0>( 698,1761, 45)
- <6>[ 81.131143 / 02-05 18:26:04.587][1] [Touch] finger released:<0>( 698,1761, 44)
- <6>[ 82.205969 / 02-05 18:26:05.657][1] [Touch] 1 finger pressed:<0>( 244,1243, 48)
- <6>[ 82.270654 / 02-05 18:26:05.727][3] [Touch] finger released:<0>( 244,1242, 45)
- <6>[ 82.893532 / 02-05 18:26:06.347][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 85.453172 / 02-05 18:26:08.907][2] msm8994_quat_mi2s_snd_shutdown: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0
- <6>[ 85.923602 / 02-05 18:26:09.377][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 86.311508 / 02-05 18:26:09.767][1] [Touch] 1 finger pressed:<0>(1096, 122, 46)
- <6>[ 86.528360 / 02-05 18:26:09.977][1] [Touch] finger released:<0>(1043, 685, 45)
- <6>[ 87.149420 / 02-05 18:26:10.607][1] [Touch] 1 finger pressed:<0>(1006, 158, 52)
- <6>[ 87.314993 / 02-05 18:26:10.767][1] [Touch] finger released:<0>( 948, 565, 45)
- <6>[ 87.847069 / 02-05 18:26:11.297][0] FG: update_temp_data: batt temp was changed !! 304 => 297
- <6>[ 88.272297 / 02-05 18:26:11.727][1] [Touch] 1 finger pressed:<0>( 468,1868, 44)
- <6>[ 88.338360 / 02-05 18:26:11.787][1] [Touch] finger released:<0>( 469,1866, 46)
- <6>[ 88.383116 / 02-05 18:26:11.837][0] msm8994_quat_mi2s_snd_startup: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0 bit width =2 sample rate =48000
- <6>[ 88.570981 / 02-05 18:26:12.027][1] [Touch] 1 finger pressed:<0>( 803, 99, 58)
- <6>[ 88.705184 / 02-05 18:26:12.157][1] [Touch] finger released:<0>( 756, 641, 45)
- <6>[ 89.125897 / 02-05 18:26:12.577][1] [Touch] 1 finger pressed:<0>(1133, 127, 44)
- <6>[ 89.292585 / 02-05 18:26:12.747][2] [Touch] finger released:<0>(1040, 673, 45)
- <6>[ 89.781069 / 02-05 18:26:13.237][1] [Touch] 1 finger pressed:<0>( 625,2612, 44)
- <6>[ 89.795380 / 02-05 18:26:13.247][1] [LGE VIBRATOR] qpnp_hap_play play : 1 voltage : 2088
- <6>[ 89.805691 / 02-05 18:26:13.257][1] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 89.858518 / 02-05 18:26:13.307][1] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 89.879016 / 02-05 18:26:13.337][1] [Touch] finger released:<0>( 646,2611, 46)
- <6>[ 90.315384 / 02-05 18:26:13.767][1] [Touch] 1 finger pressed:<0>( 866, 289, 48)
- <5>[ 90.359731 / 02-05 18:26:13.817][1] pet_watchdog
- <6>[ 90.532576 / 02-05 18:26:13.987][2] [Touch] finger released:<0>( 874,1038, 45)
- <6>[ 90.820682 / 02-05 18:26:14.277][1] [Touch] 1 finger pressed:<0>( 884, 154, 45)
- <6>[ 91.152425 / 02-05 18:26:14.607][1] [Touch] finger released:<0>( 892,1209, 44)
- <6>[ 91.500393 / 02-05 18:26:14.957][5] BluetoothAdapte[7322]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x83000006
- <1>[ 91.500413 / 02-05 18:26:14.957][5] pgd = ffffffc099f05000
- <6>[ 85.476333 / 02-05 18:26:14.957][5] msm8994_quat_mi2s_snd_shutdown Quaternary MI2S Clock is Disabled
- <1>[ 91.500423 / 02-05 18:26:14.957][5] [00000000] *pgd=00000000a6f3c003, *pmd=0000000000000000
- <4>[ 91.500441 / 02-05 18:26:14.957][5]
- <4>[ 91.500453 / 02-05 18:26:14.957][5] CPU: 5 PID: 7322 Comm: BluetoothAdapte Not tainted 3.10.49-gf53c0f6 #1
- <4>[ 91.500464 / 02-05 18:26:14.957][5] task: ffffffc09bd58a40 ti: ffffffc082024000 task.ti: ffffffc082024000
- <4>[ 91.500474 / 02-05 18:26:14.957][5] PC is at 0x0
- <4>[ 91.500482 / 02-05 18:26:14.957][5] LR is at 0xef2011cb
- <4>[ 91.500491 / 02-05 18:26:14.957][5] pc : [<0000000000000000>] lr : [<00000000ef2011cb>] pstate: 600e0010
- <4>[ 91.500498 / 02-05 18:26:14.957][5] sp : 00000000ef1059b8
- <4>[ 91.500506 / 02-05 18:26:14.957][5] x12: 00000000f6e85301
- <4>[ 91.500517 / 02-05 18:26:14.957][5] x11: 0000000012d864a0 x10: 0000000000000000
- <4>[ 91.500529 / 02-05 18:26:14.957][5] x9 : 00000000f49f4000 x8 : 0000000012d57c20
- <4>[ 91.500542 / 02-05 18:26:14.957][5] x7 : 0000000000000000 x6 : 00000000f365e12a
- <4>[ 91.500555 / 02-05 18:26:14.957][5] x5 : 00000000000102e8 x4 : 00000000eec28ac0
- <4>[ 91.500567 / 02-05 18:26:14.957][5] x3 : 00000000ef266380 x2 : 00000000ef255674
- <4>[ 91.500579 / 02-05 18:26:14.957][5] x1 : 0000000000000000 x0 : 00000000f3611dc8
- <4>[ 91.500591 / 02-05 18:26:14.957][5]
- <6>[ 91.520342 / 02-05 18:26:14.977][1] [Touch] 1 finger pressed:<0>( 276, 160, 44)
- <6>[ 91.790619 / 02-05 18:26:15.247][1] [MAX17050] [MAX17050_PRINT_INFO]=F_cap=2902,recap=1582,Ibatt=332,Iavg=-158,Empty=6143,Vbatt=3847,OCV=3878,SoC=57,AfterSoCRep=579,Raw=545,AfterSocVF=582,Raw=548,Rcomp0=0x3B,temp=30,learn=0x2633
- <6>[ 91.805313 / 02-05 18:26:15.257][1] [Touch] finger released:<0>( 345, 934, 42)
- <6>[ 92.394412 / 02-05 18:26:15.847][1] [Touch] 1 finger pressed:<0>( 467, 500, 47)
- <6>[ 92.543486 / 02-05 18:26:15.997][1] [Touch] finger released:<0>( 501,1465, 44)
- <6>[ 93.069744 / 02-05 18:26:16.527][2] msm8994_quat_mi2s_snd_shutdown: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0
- <6>[ 93.835162 / 02-05 18:26:17.287][1] [Touch] 1 finger pressed:<0>( 455, 978, 46)
- <6>[ 93.885221 / 02-05 18:26:17.337][1] [Touch] finger released:<0>( 455, 978, 47)
- <6>[ 93.918007 / 02-05 18:26:17.367][0] msm8994_quat_mi2s_snd_startup: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0 bit width =2 sample rate =48000
- <6>[ 93.092252 / 02-05 18:26:17.387][1] msm8994_quat_mi2s_snd_shutdown Quaternary MI2S Clock is Disabled
- <6>[ 93.938078 / 02-05 18:26:17.387][1] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : DHCP is complete
- <4>[ 93.980964 / 02-05 18:26:17.437][1] dhd_pno_get_for_batch: Batching SCAN mode is not enabled
- <4>[ 93.982101 / 02-05 18:26:17.437][1] dhd_pno_stop_for_batch : PNO BATCH MODE is not enabled
- <6>[ 93.986121 / 02-05 18:26:17.437][1] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : DHCP is complete
- <4>[ 94.090352 / 02-05 18:26:17.547][0] WLC_E_IF: NO_IF set, event Ignored
- <6>[ 94.091864 / 02-05 18:26:17.547][0] CFG80211-INFO2) wl_cfg80211_disconnect : Reason 3
- <6>[ 94.093560 / 02-05 18:26:17.547][3] CFG80211-INFO2) wl_is_linkdown : Link down Reason : WLC_E_LINK
- <4>[ 94.093588 / 02-05 18:26:17.547][3] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from a0:1b:29:b8:4d:f2
- <6>[ 94.098560 / 02-05 18:26:17.547][0] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- <6>[ 94.099152 / 02-05 18:26:17.557][0] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 94.103503 / 02-05 18:26:17.557][0] cfg80211: World regulatory domain updated:
- <6>[ 94.103536 / 02-05 18:26:17.557][0] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- <6>[ 94.103548 / 02-05 18:26:17.557][0] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- <6>[ 94.103559 / 02-05 18:26:17.557][0] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- <6>[ 94.103570 / 02-05 18:26:17.557][0] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- <6>[ 94.103582 / 02-05 18:26:17.557][0] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- <6>[ 94.103593 / 02-05 18:26:17.557][0] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- <6>[ 94.103605 / 02-05 18:26:17.557][0] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- <6>[ 94.103616 / 02-05 18:26:17.557][0] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- <6>[ 94.103627 / 02-05 18:26:17.557][0] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
- <6>[ 94.254274 / 02-05 18:26:17.707][1] [Touch] 1 finger pressed:<0>( 681,2337, 44)
- <6>[ 94.360765 / 02-05 18:26:17.817][0] CFGP2P-INFO2) wl_cfgp2p_del_p2p_disc_if : P2P interface unregistered
- <4>[ 94.360789 / 02-05 18:26:17.817][0] wl_android_wifi_off in
- <4>[ 94.361398 / 02-05 18:26:17.817][0] wifi_platform_set_power = 0
- <3>[ 94.361424 / 02-05 18:26:17.817][0] bcm_wifi_set_power: wifi power successed to pull down
- <6>[ 94.361456 / 02-05 18:26:17.817][0] mmc2: slot status change detected (1 -> 0), GPIO_ACTIVE_HIGH
- <6>[ 94.361485 / 02-05 18:26:17.817][0] [LGE][MMC][mmc_rescan ( ) START!] mmc2
- <6>[ 94.404235 / 02-05 18:26:17.857][1] [Touch] finger released:<0>( 879, 682, 46)
- <6>[ 94.841409 / 02-05 18:26:18.297][1] [Touch] 1 finger pressed:<0>( 871, 972, 45)
- <6>[ 94.974994 / 02-05 18:26:18.427][1] [Touch] finger released:<0>(1010, 172, 42)
- <6>[ 95.045821 / 02-05 18:26:18.497][1] [CC] current batt_temp[29], batt_temp_state[0], current batt_volt[3898], batt_volt_state[0]
- <4>[ 95.079031 / 02-05 18:26:18.537][0] [cancun] cpu 0 tl to 95, gpu:450000000 online:6
- <6>[ 95.193360 / 02-05 18:26:18.647][1] [Touch] 1 finger pressed:<0>(1006, 85, 48)
- <6>[ 95.680510 / 02-05 18:26:19.137][1] [Touch] finger released:<0>( 935,1487, 48)
- <6>[ 95.864828 / 02-05 18:26:19.317][1] [Touch] 1 finger pressed:<0>(1184, 43, 43)
- <4>[ 96.080286 / 02-05 18:26:19.537][0] [cancun] recover tl value, gpu:300000000
- <6>[ 96.282400 / 02-05 18:26:19.737][1] [Touch] finger released:<0>(1019, 907, 44)
- <6>[ 96.434870 / 02-05 18:26:19.887][1] [Touch] 1 finger pressed:<0>(1075, 152, 46)
- <6>[ 96.700432 / 02-05 18:26:20.157][1] [Touch] finger released:<0>( 995, 849, 44)
- <6>[ 96.853166 / 02-05 18:26:20.307][1] [Touch] 1 finger pressed:<0>(1013, 203, 46)
- <6>[ 97.069623 / 02-05 18:26:20.527][1] [Touch] finger released:<0>( 985, 738, 43)
- <6>[ 97.134216 / 02-05 18:26:20.587][0] msm8994_quat_mi2s_snd_shutdown: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0
- <6>[ 97.202954 / 02-05 18:26:20.657][1] [Touch] 1 finger pressed:<0>(1033, 101, 49)
- <6>[ 97.505616 / 02-05 18:26:20.957][1] [Touch] finger released:<0>( 998, 982, 44)
- <6>[ 97.690460 / 02-05 18:26:21.147][1] [Touch] 1 finger pressed:<0>( 878,1125, 45)
- <6>[ 97.859666 / 02-05 18:26:21.317][1] [Touch] finger released:<0>(1018, 263, 44)
- <4>[ 98.058835 / 02-05 18:26:21.517][0] [cancun] cpu 0 tl to 95, gpu:450000000 online:6
- <6>[ 98.193427 / 02-05 18:26:21.647][1] [Touch] 1 finger pressed:<0>( 681, 64, 45)
- <6>[ 98.377561 / 02-05 18:26:21.827][1] [Touch] finger released:<0>(1180, 31, 45)
- <6>[ 98.596971 / 02-05 18:26:22.057][2] [Touch] 1 finger pressed:<0>( 931, 109, 45)
- <6>[ 98.698070 / 02-05 18:26:22.147][1] [Touch] finger released:<0>( 775, 161, 46)
- <6>[ 98.831648 / 02-05 18:26:22.287][1] [Touch] 1 finger pressed:<0>( 841, 83, 46)
- <6>[ 98.914849 / 02-05 18:26:22.367][0] [Touch] finger released:<0>( 958, 67, 43)
- <4>[ 98.948689 / 02-05 18:26:22.397][0] [cancun] recover tl value, gpu:300000000
- <6>[ 99.032144 / 02-05 18:26:22.487][2] [Touch] 1 finger pressed:<0>(1195, 22, 45)
- <6>[ 99.099564 / 02-05 18:26:22.557][1] [Touch] finger released:<0>(1142, 34, 46)
- <6>[ 99.518426 / 02-05 18:26:22.977][1] [Touch] 1 finger pressed:<0>(1177,1548, 43)
- <6>[ 99.600109 / 02-05 18:26:23.057][1] [Touch] finger released:<0>(1180,1549, 48)
- <6>[ 99.626920 / 02-05 18:26:23.077][0] msm8994_quat_mi2s_snd_startup: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0 bit width =2 sample rate =48000
- <6>[ 100.053109 / 02-05 18:26:23.507][1] [Touch] 1 finger pressed:<0>( 798,2318, 47)
- <6>[ 100.062772 / 02-05 18:26:23.517][2] [LGE VIBRATOR] qpnp_hap_play play : 1 voltage : 2088
- <6>[ 100.072986 / 02-05 18:26:23.527][2] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 100.119231 / 02-05 18:26:23.577][3] [Touch] finger released:<0>( 799,2316, 44)
- <6>[ 100.126022 / 02-05 18:26:23.577][2] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <5>[ 100.381049 / 02-05 18:26:23.837][1] pet_watchdog
- <6>[ 101.178946 / 02-05 18:26:24.637][1] [Touch] 1 finger pressed:<0>( 285,1317, 43)
- <6>[ 101.226078 / 02-05 18:26:24.677][3] [Touch] finger released:<0>( 285,1317, 49)
- <6>[ 102.082764 / 02-05 18:26:25.537][1] [Touch] 1 finger pressed:<0>( 961,1907, 45)
- <6>[ 102.165455 / 02-05 18:26:25.617][1] [Touch] finger released:<0>( 962,1906, 43)
- <6>[ 103.239899 / 02-05 18:26:26.697][1] [Touch] 1 finger pressed:<0>( 821,1793, 47)
- <6>[ 103.304865 / 02-05 18:26:26.757][1] [Touch] finger released:<0>( 821,1793, 43)
- <6>[ 103.588570 / 02-05 18:26:27.037][1] [Touch] 1 finger pressed:<0>(1129, 112, 46)
- <6>[ 103.756936 / 02-05 18:26:27.207][1] [Touch] finger released:<0>(1037, 707, 46)
- <6>[ 104.109062 / 02-05 18:26:27.567][1] [Touch] 1 finger pressed:<0>( 845, 244, 47)
- <6>[ 104.242280 / 02-05 18:26:27.697][1] [Touch] finger released:<0>( 730, 832, 46)
- <6>[ 104.678193 / 02-05 18:26:28.127][1] [Touch] 1 finger pressed:<0>( 550, 535, 55)
- <6>[ 104.795256 / 02-05 18:26:28.247][0] [Touch] finger released:<0>( 665,1559, 44)
- <6>[ 105.416443 / 02-05 18:26:28.867][1] [Touch] 1 finger pressed:<0>( 396, 957, 47)
- <6>[ 105.449921 / 02-05 18:26:28.907][1] [Touch] finger released:<0>( 396, 957, 46)
- <4>[ 105.546695 / 02-05 18:26:28.997][1]
- <4>[ 105.546695 / 02-05 18:26:28.997][1] Dongle Host Driver, version 1.201.54.8 (r)
- <4>[ 105.546695 / 02-05 18:26:28.997][1] Compiled in drivers/net/wireless/bcmdhd on Feb 1 2016 at 11:06:24
- <4>[ 105.546734 / 02-05 18:26:28.997][1] wl_android_wifi_on in
- <4>[ 105.546747 / 02-05 18:26:28.997][1] wifi_platform_set_power = 1
- <6>[ 105.547131 / 02-05 18:26:28.997][0] mmc2: slot status change detected (0 -> 1), GPIO_ACTIVE_HIGH
- <6>[ 105.547175 / 02-05 18:26:28.997][0] [LGE][MMC][mmc_rescan ( ) START!] mmc2
- <3>[ 105.697892 / 02-05 18:26:29.147][5] bcm_wifi_set_power: wifi power successed to pull up
- <6>[ 105.818548 / 02-05 18:26:29.267][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 11
- <4>[ 105.824656 / 02-05 18:26:29.277][0] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2
- <4>[ 105.826609 / 02-05 18:26:29.277][2] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000
- <4>[ 105.827217 / 02-05 18:26:29.277][0] dhdsdio_download_firmware: firmware path=/system/etc/firmware/fw_bcmdhd.bin, nvram path=/system/etc/wifi/bcmdhd.cal
- <4>[ 105.947879 / 02-05 18:26:29.397][1] sdioh_request_buffer: [1] doing memory copy buf=ffffffc086ce4000, len=2011
- <4>[ 105.948946 / 02-05 18:26:29.407][3] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
- <4>[ 106.034021 / 02-05 18:26:29.487][1] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
- <4>[ 106.037598 / 02-05 18:26:29.487][1] wifi_platform_get_mac_addr
- <4>[ 106.040639 / 02-05 18:26:29.497][1] Firmware up: op_mode=0x0005, MAC=00:90:4c:1f:3a:0e
- <4>[ 106.054415 / 02-05 18:26:29.507][1] dhd_wl_ioctl: WLC_SET_VAR: txbf, ret = -23
- <4>[ 106.054440 / 02-05 18:26:29.507][1] dhd_preinit_ioctls Set txbf failed -23
- <4>[ 106.057083 / 02-05 18:26:29.507][1] dhd_wl_ioctl: WLC_SET_VAR: pspretend_threshold, ret = -23
- <4>[ 106.057096 / 02-05 18:26:29.507][1] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23
- <4>[ 106.066848 / 02-05 18:26:29.517][1] Firmware version = wl0: Sep 5 2015 02:05:46 version 7.45.60.9 (C0 Station/P2P feature) FWID 01-407030d0
- <4>[ 106.068170 / 02-05 18:26:29.517][3] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
- <4>[ 106.068836 / 02-05 18:26:29.527][3] dhd_wl_ioctl: WLC_GET_VAR: pfnlbest, ret = -14
- <4>[ 106.069758 / 02-05 18:26:29.527][1] dhd_preinit_config : config path : /data/misc/wifi/config
- <4>[ 106.069814 / 02-05 18:26:29.527][1] dhd_preinit_proc: Change Macaddr = 64:BC:0C:80:AF:81
- <6>[ 97.156889 / 02-05 18:26:29.737][0] msm8994_quat_mi2s_snd_shutdown Quaternary MI2S Clock is Disabled
- <6>[ 106.281270 / 02-05 18:26:29.737][0] CFGP2P-INFO2) wl_cfgp2p_add_p2p_disc_if : P2P interface registered
- <4>[ 106.290706 / 02-05 18:26:29.747][0] WLC_E_IF: NO_IF set, event Ignored
- <4>[ 106.347918 / 02-05 18:26:29.797][2] dhd_set_suspend: Remove extra suspend setting
- <6>[ 106.398195 / 02-05 18:26:29.847][0] CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
- <6>[ 106.975076 / 02-05 18:26:30.427][1] [Touch] 1 finger pressed:<0>( 677,2012, 45)
- <6>[ 107.125372 / 02-05 18:26:30.577][1] [Touch] finger released:<0>( 587,1054, 42)
- <6>[ 107.630116 / 02-05 18:26:31.087][1] [Touch] 1 finger pressed:<0>( 781,1642, 46)
- <6>[ 107.728916 / 02-05 18:26:31.187][1] [Touch] finger released:<0>( 756, 867, 43)
- <6>[ 108.641979 / 02-05 18:26:32.097][2] msm8994_quat_mi2s_snd_shutdown: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0
- <6>[ 108.665745 / 02-05 18:26:32.807][0] msm8994_quat_mi2s_snd_shutdown Quaternary MI2S Clock is Disabled
- <6>[ 109.355671 / 02-05 18:26:32.807][0] CFG80211-TRACE) wl_escan_handler : SCAN COMPLETED: scanned AP count=1
- <4>[ 109.481055 / 02-05 18:26:32.937][1] dhd_wl_ioctl: WLC_IOCTL: cmd: 23, ret = -17
- <6>[ 109.491660 / 02-05 18:26:32.947][1] CFG80211-INFO2) wl_cfg80211_connect : Connectting witha0:1b:29:b8:4d:f2 channel (11) ssid "NUMERICABLE-6FC3", len (16)
- <6>[ 109.491660 / 02-05 18:26:32.947][1]
- <4>[ 109.543940 / 02-05 18:26:32.997][0] wl_bss_connect_done succeeded with a0:1b:29:b8:4d:f2
- <4>[ 109.544593 / 02-05 18:26:32.997][0] ETHER_TYPE_802_1X [RX]: ver 1, type 3, replay 1
- <4>[ 109.550129 / 02-05 18:26:33.007][0] dhdcdc_set_ioctl: SET PM to 0
- <6>[ 109.550934 / 02-05 18:26:33.007][0] cfg80211: Calling CRDA for country: FR
- <6>[ 109.551230 / 02-05 18:26:33.007][0] cfg80211: Regulatory domain changed to country: FR
- <6>[ 109.551254 / 02-05 18:26:33.007][0] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- <6>[ 109.551270 / 02-05 18:26:33.007][0] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- <6>[ 109.551286 / 02-05 18:26:33.007][0] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
- <6>[ 109.551298 / 02-05 18:26:33.007][0] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
- <6>[ 109.551314 / 02-05 18:26:33.007][0] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm)
- <6>[ 109.551329 / 02-05 18:26:33.007][0] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
- <4>[ 109.563664 / 02-05 18:26:33.017][0] ETHER_TYPE_802_1X [RX]: ver 1, type 3, replay 2
- <4>[ 109.598472 / 02-05 18:26:33.047][1] dhd_set_suspend: Remove extra suspend setting
- <4>[ 109.607428 / 02-05 18:26:33.057][1] dhdcdc_set_ioctl: SET PM to 0
- <6>[ 109.609046 / 02-05 18:26:33.067][1] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : DHCP session starts
- <4>[ 109.643666 / 02-05 18:26:33.097][2] wl_bss_connect_done succeeded with a0:1b:29:b8:4d:f2
- <4>[ 109.695665 / 02-05 18:26:33.147][0] dhd_pno_get_for_batch: Batching SCAN mode is not enabled
- <4>[ 109.696083 / 02-05 18:26:33.147][0] dhd_pno_stop_for_batch : PNO BATCH MODE is not enabled
- <4>[ 109.696098 / 02-05 18:26:33.147][0] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL
- <4>[ 109.696109 / 02-05 18:26:33.147][0] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL
- <5>[ 110.401054 / 02-05 18:26:33.857][1] pet_watchdog
- <6>[ 110.713142 / 02-05 18:26:34.167][2] CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : DHCP is complete
- <4>[ 110.728129 / 02-05 18:26:34.177][0] dhdcdc_set_ioctl: SET PM to 2
- <6>[ 111.860098 / 02-05 18:26:35.317][1] [MAX17050] [MAX17050_PRINT_INFO]=F_cap=2902,recap=1583,Ibatt=-210,Iavg=-123,Empty=6143,Vbatt=3912,OCV=3880,SoC=57,AfterSoCRep=579,Raw=545,AfterSocVF=584,Raw=549,Rcomp0=0x3B,temp=30,learn=0x2633
- <6>[ 115.630790 / 02-05 18:26:39.087][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 117.509890 / 02-05 18:26:40.967][0] BluetoothAdapte[7520]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x83000006
- <1>[ 117.509950 / 02-05 18:26:40.967][0] pgd = ffffffc07d3bf000
- <1>[ 117.509988 / 02-05 18:26:40.967][0] [00000000] *pgd=00000000a2770003, *pmd=0000000000000000
- <4>[ 117.510029 / 02-05 18:26:40.967][0]
- <4>[ 117.510075 / 02-05 18:26:40.967][0] CPU: 0 PID: 7520 Comm: BluetoothAdapte Not tainted 3.10.49-gf53c0f6 #1
- <4>[ 117.510114 / 02-05 18:26:40.967][0] task: ffffffc09f2d9480 ti: ffffffc07e2ec000 task.ti: ffffffc07e2ec000
- <4>[ 117.510151 / 02-05 18:26:40.967][0] PC is at 0x0
- <4>[ 117.510185 / 02-05 18:26:40.967][0] LR is at 0xef2011cb
- <4>[ 117.510220 / 02-05 18:26:40.967][0] pc : [<0000000000000000>] lr : [<00000000ef2011cb>] pstate: 600e0010
- <4>[ 117.510253 / 02-05 18:26:40.967][0] sp : 00000000ef1059b8
- <4>[ 117.510286 / 02-05 18:26:40.967][0] x12: 00000000f6e85301
- <4>[ 117.510317 / 02-05 18:26:40.967][0] x11: 0000000012d874a0 x10: 0000000000000000
- <4>[ 117.510358 / 02-05 18:26:40.967][0] x9 : 00000000f49f4000 x8 : 0000000012d57ae0
- <4>[ 117.510397 / 02-05 18:26:40.967][0] x7 : 0000000000000000 x6 : 00000000f365e12a
- <4>[ 117.510436 / 02-05 18:26:40.967][0] x5 : 00000000000102e8 x4 : 00000000eec28ac0
- <4>[ 117.510476 / 02-05 18:26:40.967][0] x3 : 00000000ef266380 x2 : 00000000ef255674
- <4>[ 117.510515 / 02-05 18:26:40.967][0] x1 : 0000000000000000 x0 : 00000000f360ddc8
- <4>[ 117.510550 / 02-05 18:26:40.967][0]
- <6>[ 118.621694 / 02-05 18:26:42.077][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <5>[ 120.422902 / 02-05 18:26:43.877][1] pet_watchdog
- <6>[ 121.922011 / 02-05 18:26:45.377][0] [XO_THERM] Result:34 Raw:31911
- <6>[ 121.923429 / 02-05 18:26:45.377][0] [BOARD_THERM] Result:295 Raw:36776
- <6>[ 121.923467 / 02-05 18:26:45.377][0] [VS_THERM] Result:316
- <7>[ 122.080047 / 02-05 18:26:45.537][2] now = 4294949504, schedule = 4294961594, rounded schedule = 4294961694 => 4294961594
- <6>[ 122.085828 / 02-05 18:26:45.537][1] [CC] [C], USB_PRESENT, WIRELESS_PRESENT, USB_TYPE, CABLE_INFO, USBIN_VOL, BATT_FAKE, BATT_TEMP, BATT_SOC, BATT_VOL, PMI_IUSB_SET, PMI_IUSB_AICL, PMI_IBAT_SET, TOTAL_IBAT_NOW
- <6>[ 122.085904 / 02-05 18:26:45.537][1] [CC] [I], 1, 0, USB, OPEN, 4960, FAKE_OFF, 29, 57, 3930, 500, 0, 2000, -123
- <6>[ 122.099031 / 02-05 18:26:45.557][1] [CC] charge_type = 3
- <12>[ 122.111834 / 02-05 18:26:45.567][2] healthd: charger_controller: Unknown power supply type
- <6>[ 124.137306 / 02-05 18:26:47.587][1] [Touch] 1 finger pressed:<0>(1128,1462, 48)
- <6>[ 124.218034 / 02-05 18:26:47.667][1] [Touch] finger released:<0>(1139,1462, 46)
- <6>[ 124.246289 / 02-05 18:26:47.697][0] msm8994_quat_mi2s_snd_startup: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0 bit width =2 sample rate =48000
- <6>[ 124.799197 / 02-05 18:26:48.257][1] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=75, cal_value=185
- <6>[ 124.816466 / 02-05 18:26:48.267][1] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=74, cal_value=179
- <6>[ 124.848953 / 02-05 18:26:48.307][1] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=73, cal_value=173
- <6>[ 124.865314 / 02-05 18:26:48.317][1] mdss_fb_set_bl_brightness: [LCD][WLED] backlight level=72, cal_value=169
- <6>[ 124.891663 / 02-05 18:26:48.347][0] [Touch] 1 finger pressed:<0>( 882,1845, 47)
- <6>[ 125.055688 / 02-05 18:26:48.507][0] [Touch] finger released:<0>( 969,1362, 44)
- <6>[ 125.119638 / 02-05 18:26:48.577][1] [CC] current batt_temp[29], batt_temp_state[0], current batt_volt[3908], batt_volt_state[0]
- <6>[ 125.845512 / 02-05 18:26:49.297][1] [Touch] 1 finger pressed:<0>(1076, 27, 44)
- <6>[ 126.046843 / 02-05 18:26:49.497][0] [Touch] finger released:<0>( 940,1008, 57)
- <6>[ 126.501403 / 02-05 18:26:49.957][2] [Touch] 1 finger pressed:<0>(1252, 190, 58)
- <6>[ 126.648077 / 02-05 18:26:50.097][1] [Touch] finger released:<0>(1128, 807, 46)
- <6>[ 127.468963 / 02-05 18:26:50.927][2] msm8994_quat_mi2s_snd_shutdown: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0
- <6>[ 127.503913 / 02-05 18:26:50.957][1] [Touch] 1 finger pressed:<0>(1073, 964, 44)
- <6>[ 127.588353 / 02-05 18:26:51.037][1] [Touch] finger released:<0>(1079, 958, 46)
- <6>[ 127.622197 / 02-05 18:26:51.077][0] msm8994_quat_mi2s_snd_startup: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0 bit width =2 sample rate =48000
- <6>[ 127.716773 / 02-05 18:26:51.167][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 128.376272 / 02-05 18:26:51.827][1] [Touch] 1 finger pressed:<0>(1178, 235, 44)
- <6>[ 128.492899 / 02-05 18:26:51.947][1] [Touch] finger released:<0>(1178, 235, 48)
- <6>[ 129.632345 / 02-05 18:26:53.087][1] [Touch] 1 finger pressed:<0>(1112,2095, 45)
- <6>[ 130.118143 / 02-05 18:26:53.567][2] [Touch] finger released:<0>(1127,1864, 48)
- <3>[ 130.393038 / 02-05 18:26:53.847][2] binder: 7637: binder_alloc_buf, no vma
- <5>[ 130.441423 / 02-05 18:26:53.897][1] pet_watchdog
- <6>[ 130.603904 / 02-05 18:26:54.057][1] [Touch] 1 finger pressed:<0>(1107,1464, 47)
- <6>[ 130.654580 / 02-05 18:26:54.107][1] [Touch] finger released:<0>(1107,1464, 47)
- <4>[ 130.759314 / 02-05 18:26:54.217][0] dhdcdc_set_ioctl: SET PM to 2
- <6>[ 127.491838 / 02-05 18:26:54.237][0] msm8994_quat_mi2s_snd_shutdown Quaternary MI2S Clock is Disabled
- <6>[ 130.785594 / 02-05 18:26:54.237][0] CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
- <6>[ 131.896450 / 02-05 18:26:55.347][2] [Touch] 1 finger pressed:<0>(1157,1728, 45)
- <6>[ 131.941713 / 02-05 18:26:55.397][1] [MAX17050] [MAX17050_PRINT_INFO]=F_cap=2902,recap=1584,Ibatt=-249,Iavg=-128,Empty=6143,Vbatt=3916,OCV=3880,SoC=58,AfterSoCRep=580,Raw=546,AfterSocVF=584,Raw=549,Rcomp0=0x3B,temp=29,learn=0x2633
- <6>[ 131.945337 / 02-05 18:26:55.397][1] [Touch] finger released:<0>(1157,1728, 47)
- <6>[ 131.973043 / 02-05 18:26:55.427][1] [CC] charge_type = 3
- <12>[ 131.980047 / 02-05 18:26:55.437][0] healthd: charger_controller: Unknown power supply type
- <6>[ 134.441600 / 02-05 18:26:57.897][0] CFG80211-TRACE) wl_escan_handler : SCAN COMPLETED: scanned AP count=4
- <6>[ 134.560947 / 02-05 18:26:58.017][1] [Touch] 1 finger pressed:<0>( 319,2690, 46)
- <6>[ 134.571876 / 02-05 18:26:58.027][1] [LGE VIBRATOR] qpnp_hap_play play : 1 voltage : 2088
- <6>[ 134.581876 / 02-05 18:26:58.037][1] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 134.634721 / 02-05 18:26:58.087][1] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 134.677183 / 02-05 18:26:58.127][1] [Touch] finger released:<0>( 318,2692, 42)
- <6>[ 135.466525 / 02-05 18:26:58.917][1] [Touch] 1 finger pressed:<0>(1080,2176, 45)
- <6>[ 135.816757 / 02-05 18:26:59.267][1] [Touch] finger released:<0>(1171,1861, 54)
- <6>[ 136.134796 / 02-05 18:26:59.587][1] [Touch] 1 finger pressed:<0>(1152,2011, 45)
- <6>[ 136.319004 / 02-05 18:26:59.777][1] [Touch] finger released:<0>(1237,1871, 45)
- <6>[ 136.771536 / 02-05 18:27:00.227][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 136.772365 / 02-05 18:27:00.227][1] [Touch] 1 finger pressed:<0>(1192,2010, 43)
- <6>[ 137.174325 / 02-05 18:27:00.627][1] [Touch] finger released:<0>(1263,1709, 45)
- <6>[ 137.443524 / 02-05 18:27:00.897][0] [Touch] 1 finger pressed:<0>(1163,2000, 44)
- <6>[ 137.576798 / 02-05 18:27:01.027][1] [Touch] finger released:<0>(1184,1871, 47)
- <6>[ 137.859984 / 02-05 18:27:01.317][2] msm8994_quat_mi2s_snd_shutdown: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0
- <6>[ 138.097060 / 02-05 18:27:01.547][1] [Touch] 1 finger pressed:<0>( 648,2263, 60)
- <6>[ 138.347178 / 02-05 18:27:01.797][1] [Touch] finger released:<0>(1193,1644, 58)
- <6>[ 138.516007 / 02-05 18:27:01.967][1] [Touch] 1 finger pressed:<0>(1075,1973, 46)
- <6>[ 138.850562 / 02-05 18:27:02.307][1] [Touch] finger released:<0>(1230,1643, 48)
- <6>[ 139.086185 / 02-05 18:27:02.537][1] [Touch] 1 finger pressed:<0>(1121,2020, 45)
- <6>[ 139.252957 / 02-05 18:27:02.707][1] [Touch] finger released:<0>(1193,1736, 55)
- <6>[ 139.488826 / 02-05 18:27:02.947][2] [Touch] 1 finger pressed:<0>(1127,1962, 48)
- <6>[ 139.655167 / 02-05 18:27:03.107][1] [Touch] finger released:<0>(1206,1675, 48)
- <6>[ 139.794952 / 02-05 18:27:03.247][3] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <5>[ 140.461235 / 02-05 18:27:03.917][1] pet_watchdog
- <6>[ 141.301321 / 02-05 18:27:04.757][1] [Touch] 1 finger pressed:<0>(1178,1670, 76)
- <6>[ 141.381759 / 02-05 18:27:04.837][1] [Touch] finger released:<0>(1139,2155, 47)
- <6>[ 142.287469 / 02-05 18:27:05.737][1] [Touch] 1 finger pressed:<0>(1188,1652, 47)
- <6>[ 142.387433 / 02-05 18:27:05.837][1] [Touch] finger released:<0>(1145,2169, 45)
- <6>[ 142.819693 / 02-05 18:27:06.277][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 143.325734 / 02-05 18:27:06.777][0] BluetoothAdapte[7744]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x83000006
- <1>[ 143.325789 / 02-05 18:27:06.777][0] pgd = ffffffc07d1de000
- <6>[ 137.882727 / 02-05 18:27:06.777][0] msm8994_quat_mi2s_snd_shutdown Quaternary MI2S Clock is Disabled
- <1>[ 143.325826 / 02-05 18:27:06.777][0] [00000000] *pgd=000000007ec9f003, *pmd=0000000000000000
- <4>[ 143.325876 / 02-05 18:27:06.777][0]
- <4>[ 143.325918 / 02-05 18:27:06.777][0] CPU: 0 PID: 7744 Comm: BluetoothAdapte Not tainted 3.10.49-gf53c0f6 #1
- <4>[ 143.325956 / 02-05 18:27:06.777][0] task: ffffffc0820ec7c0 ti: ffffffc07e954000 task.ti: ffffffc07e954000
- <4>[ 143.325991 / 02-05 18:27:06.777][0] PC is at 0x0
- <4>[ 143.326024 / 02-05 18:27:06.777][0] LR is at 0xef2011cb
- <4>[ 143.326058 / 02-05 18:27:06.777][0] pc : [<0000000000000000>] lr : [<00000000ef2011cb>] pstate: 600e0010
- <4>[ 143.326090 / 02-05 18:27:06.777][0] sp : 00000000ef1059b8
- <4>[ 143.326122 / 02-05 18:27:06.777][0] x12: 00000000f6e85301
- <4>[ 143.326151 / 02-05 18:27:06.777][0] x11: 0000000012d7f4a0 x10: 0000000000000000
- <4>[ 143.326187 / 02-05 18:27:06.777][0] x9 : 00000000f49f4000 x8 : 0000000012d57ae0
- <4>[ 143.326223 / 02-05 18:27:06.777][0] x7 : 0000000000000000 x6 : 00000000f365e12a
- <4>[ 143.326259 / 02-05 18:27:06.777][0] x5 : 00000000000102e8 x4 : 00000000eec28ac0
- <4>[ 143.326294 / 02-05 18:27:06.777][0] x3 : 00000000ef266380 x2 : 00000000ef255674
- <4>[ 143.326330 / 02-05 18:27:06.777][0] x1 : 0000000000000000 x0 : 00000000f3617dc8
- <4>[ 143.326365 / 02-05 18:27:06.777][0]
- <6>[ 144.550745 / 02-05 18:27:08.007][1] [Touch] 1 finger pressed:<0>(1178,1458, 45)
- <6>[ 144.633659 / 02-05 18:27:08.087][0] [Touch] finger released:<0>(1180,1458, 49)
- <6>[ 144.675172 / 02-05 18:27:08.127][0] msm8994_quat_mi2s_snd_startup: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0 bit width =2 sample rate =48000
- <6>[ 145.849245 / 02-05 18:27:09.307][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 146.471652 / 02-05 18:27:09.927][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 147.895517 / 02-05 18:27:11.347][2] msm8994_quat_mi2s_snd_shutdown: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0
- <6>[ 148.883032 / 02-05 18:27:12.337][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 150.032413 / 02-05 18:27:13.487][1] [Touch] 1 finger pressed:<0>( 728,2646, 47)
- <6>[ 150.045320 / 02-05 18:27:13.497][3] [LGE VIBRATOR] qpnp_hap_play play : 1 voltage : 2088
- <6>[ 150.055629 / 02-05 18:27:13.507][3] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 150.095269 / 02-05 18:27:13.547][1] [Touch] finger released:<0>( 728,2646, 46)
- <6>[ 150.109070 / 02-05 18:27:13.567][3] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 150.124723 / 02-05 18:27:13.577][0] msm8994_quat_mi2s_snd_startup: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0 bit width =2 sample rate =48000
- <5>[ 150.481677 / 02-05 18:27:13.937][1] pet_watchdog
- <6>[ 150.514766 / 02-05 18:27:13.967][2] [Touch] 1 finger pressed:<0>( 703,2418, 42)
- <6>[ 150.518426 / 02-05 18:27:13.967][2] [LGE VIBRATOR] qpnp_hap_play play : 1 voltage : 2088
- <6>[ 150.528418 / 02-05 18:27:13.977][2] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 150.564799 / 02-05 18:27:14.017][1] [Touch] finger released:<0>( 703,2418, 46)
- <6>[ 150.581302 / 02-05 18:27:14.037][2] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 147.919052 / 02-05 18:27:14.237][1] msm8994_quat_mi2s_snd_shutdown Quaternary MI2S Clock is Disabled
- <6>[ 150.787994 / 02-05 18:27:14.237][1] CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
- <6>[ 150.797377 / 02-05 18:27:14.247][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 151.006387 / 02-05 18:27:14.457][1] CFG80211-TRACE) wl_escan_handler : SCAN COMPLETED: scanned AP count=1
- <6>[ 151.438970 / 02-05 18:27:14.897][1] [Touch] 1 finger pressed:<0>( 748,2665, 45)
- <6>[ 151.451039 / 02-05 18:27:14.907][0] [LGE VIBRATOR] qpnp_hap_play play : 1 voltage : 2088
- <6>[ 151.461018 / 02-05 18:27:14.917][0] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 151.504310 / 02-05 18:27:14.957][1] [Touch] finger released:<0>( 751,2656, 48)
- <6>[ 151.513858 / 02-05 18:27:14.967][0] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 151.902882 / 02-05 18:27:15.357][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 152.021506 / 02-05 18:27:15.477][1] [MAX17050] [MAX17050_PRINT_INFO]=F_cap=2902,recap=1585,Ibatt=313,Iavg=-141,Empty=6143,Vbatt=3853,OCV=3880,SoC=58,AfterSoCRep=580,Raw=546,AfterSocVF=584,Raw=549,Rcomp0=0x3B,temp=29,learn=0x2633
- <6>[ 152.023587 / 02-05 18:27:15.477][1] [Touch] 1 finger pressed:<0>( 203,1503, 47)
- <6>[ 152.074341 / 02-05 18:27:15.527][1] [Touch] finger released:<0>( 203,1503, 47)
- <6>[ 153.669088 / 02-05 18:27:17.127][1] [Touch] 1 finger pressed:<0>( 797,1262, 46)
- <6>[ 153.799954 / 02-05 18:27:17.257][2] [Touch] finger released:<0>( 881, 681, 46)
- <6>[ 154.608034 / 02-05 18:27:18.057][1] [Touch] 1 finger pressed:<0>( 953,1906, 41)
- <6>[ 154.688984 / 02-05 18:27:18.147][1] [Touch] finger released:<0>( 953,1906, 44)
- <6>[ 154.924089 / 02-05 18:27:18.377][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 155.040020 / 02-05 18:27:18.497][1] [CC] current batt_temp[29], batt_temp_state[0], current batt_volt[3871], batt_volt_state[0]
- <6>[ 155.862219 / 02-05 18:27:19.317][1] [Touch] 1 finger pressed:<0>(1250,1874, 46)
- <6>[ 155.929486 / 02-05 18:27:19.387][1] [Touch] finger released:<0>(1250,1874, 45)
- <6>[ 156.229051 / 02-05 18:27:19.687][2] BluetoothAdapte[7798]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x83000006
- <1>[ 156.229080 / 02-05 18:27:19.687][2] pgd = ffffffc0984db000
- <1>[ 156.229093 / 02-05 18:27:19.687][2] [00000000] *pgd=000000007f3c5003, *pmd=0000000000000000
- <4>[ 156.229109 / 02-05 18:27:19.687][2]
- <4>[ 156.229127 / 02-05 18:27:19.687][2] CPU: 2 PID: 7798 Comm: BluetoothAdapte Not tainted 3.10.49-gf53c0f6 #1
- <4>[ 156.229143 / 02-05 18:27:19.687][2] task: ffffffc09bd5a900 ti: ffffffc07d5cc000 task.ti: ffffffc07d5cc000
- <4>[ 156.229159 / 02-05 18:27:19.687][2] PC is at 0x0
- <4>[ 156.229172 / 02-05 18:27:19.687][2] LR is at 0xef2011cb
- <4>[ 156.229186 / 02-05 18:27:19.687][2] pc : [<0000000000000000>] lr : [<00000000ef2011cb>] pstate: 600e0010
- <4>[ 156.229199 / 02-05 18:27:19.687][2] sp : 00000000ef1059b8
- <4>[ 156.229211 / 02-05 18:27:19.687][2] x12: 00000000f6e85301
- <4>[ 156.229222 / 02-05 18:27:19.687][2] x11: 0000000012d8c480 x10: 0000000000000000
- <4>[ 156.229238 / 02-05 18:27:19.687][2] x9 : 00000000f49f4000 x8 : 0000000012d57de0
- <4>[ 156.229252 / 02-05 18:27:19.687][2] x7 : 0000000000000000 x6 : 00000000f365e12a
- <4>[ 156.229380 / 02-05 18:27:19.687][2] x5 : 00000000000102e8 x4 : 00000000eec28ac0
- <4>[ 156.229396 / 02-05 18:27:19.687][2] x3 : 00000000ef266380 x2 : 00000000ef255674
- <4>[ 156.229411 / 02-05 18:27:19.687][2] x1 : 0000000000000000 x0 : 00000000f3611dc8
- <4>[ 156.229426 / 02-05 18:27:19.687][2]
- <6>[ 156.549274 / 02-05 18:27:20.007][1] [Touch] 1 finger pressed:<0>(1091,1903, 44)
- <6>[ 156.649213 / 02-05 18:27:20.107][1] [Touch] finger released:<0>(1093,1901, 45)
- <6>[ 158.947294 / 02-05 18:27:22.397][2] [Touch] 1 finger pressed:<0>(1145, 127, 42)
- <6>[ 159.515860 / 02-05 18:27:22.967][2] [Touch] finger released:<0>(1114, 229, 45)
- <6>[ 159.849869 / 02-05 18:27:23.307][2] msm8994_quat_mi2s_snd_shutdown: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0
- <6>[ 159.920261 / 02-05 18:27:23.377][2] [Touch] 1 finger pressed:<0>( 976,1873, 44)
- <6>[ 160.019435 / 02-05 18:27:23.477][1] [Touch] finger released:<0>( 976,1873, 43)
- <6>[ 160.057417 / 02-05 18:27:23.507][0] msm8994_quat_mi2s_snd_startup: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0 bit width =2 sample rate =48000
- <5>[ 160.500296 / 02-05 18:27:23.957][1] pet_watchdog
- <6>[ 159.872785 / 02-05 18:27:26.727][2] msm8994_quat_mi2s_snd_shutdown Quaternary MI2S Clock is Disabled
- <6>[ 163.275432 / 02-05 18:27:26.727][2] msm8994_quat_mi2s_snd_shutdown: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0
- <6>[ 163.304458 / 02-05 18:27:26.757][1] [Touch] 1 finger pressed:<0>(1222,1913, 42)
- <6>[ 163.422012 / 02-05 18:27:26.877][1] [Touch] finger released:<0>(1226,1903, 46)
- <6>[ 163.449719 / 02-05 18:27:26.907][0] msm8994_quat_mi2s_snd_startup: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0 bit width =2 sample rate =48000
- <6>[ 163.672475 / 02-05 18:27:27.127][2] [Touch] 1 finger pressed:<0>(1220, 5, 41)
- <6>[ 163.841092 / 02-05 18:27:27.297][1] [Touch] finger released:<0>(1051,1058, 42)
- <6>[ 163.977583 / 02-05 18:27:27.427][2] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 164.193338 / 02-05 18:27:27.647][0] [Touch] 1 finger pressed:<0>(1124, 162, 48)
- <6>[ 164.325188 / 02-05 18:27:27.777][0] [Touch] finger released:<0>(1019, 991, 44)
- <6>[ 164.644995 / 02-05 18:27:28.097][1] [Touch] 1 finger pressed:<0>(1118, 266, 45)
- <6>[ 164.761696 / 02-05 18:27:28.217][0] [Touch] finger released:<0>(1072,1207, 42)
- <6>[ 165.231748 / 02-05 18:27:28.687][1] [Touch] 1 finger pressed:<0>(1128, 203, 44)
- <6>[ 165.265613 / 02-05 18:27:28.717][1] [Touch] finger released:<0>(1128, 203, 40)
- <6>[ 165.968809 / 02-05 18:27:29.427][1] [Touch] 1 finger pressed:<0>( 866,1756, 46)
- <6>[ 166.068380 / 02-05 18:27:29.517][1] [Touch] finger released:<0>( 803,1050, 46)
- <6>[ 166.890800 / 02-05 18:27:30.347][1] [Touch] 1 finger pressed:<0>( 759,2206, 46)
- <6>[ 166.923856 / 02-05 18:27:30.377][1] [Touch] finger released:<0>( 759,2206, 46)
- <6>[ 167.241895 / 02-05 18:27:30.697][2] [Touch] 1 finger pressed:<0>( 758,1871, 42)
- <6>[ 167.779748 / 02-05 18:27:31.237][1] [Touch] finger released:<0>( 843,1326, 45)
- <6>[ 168.466956 / 02-05 18:27:31.917][1] [Touch] 1 finger pressed:<0>( 612,1878, 46)
- <6>[ 168.734529 / 02-05 18:27:32.187][1] [Touch] finger released:<0>( 724,1471, 42)
- <6>[ 168.935036 / 02-05 18:27:32.387][2] [Touch] 1 finger pressed:<0>( 581,2104, 45)
- <6>[ 169.019278 / 02-05 18:27:32.477][1] [Touch] finger released:<0>( 581,2104, 45)
- <6>[ 169.055454 / 02-05 18:27:32.507][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 169.344205 / 02-05 18:27:32.797][0] BluetoothAdapte[7918]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x83000006
- <1>[ 169.344246 / 02-05 18:27:32.797][0] pgd = ffffffc097e92000
- <6>[ 163.299172 / 02-05 18:27:32.797][0] msm8994_quat_mi2s_snd_shutdown Quaternary MI2S Clock is Disabled
- <1>[ 169.344267 / 02-05 18:27:32.797][0] [00000000] *pgd=000000007fcf8003, *pmd=0000000000000000
- <4>[ 169.344384 / 02-05 18:27:32.797][0]
- <4>[ 169.344405 / 02-05 18:27:32.797][0] CPU: 0 PID: 7918 Comm: BluetoothAdapte Not tainted 3.10.49-gf53c0f6 #1
- <4>[ 169.344421 / 02-05 18:27:32.797][0] task: ffffffc0a2e88000 ti: ffffffc07f11c000 task.ti: ffffffc07f11c000
- <4>[ 169.344438 / 02-05 18:27:32.797][0] PC is at 0x0
- <4>[ 169.344451 / 02-05 18:27:32.797][0] LR is at 0xef2011cb
- <4>[ 169.344465 / 02-05 18:27:32.797][0] pc : [<0000000000000000>] lr : [<00000000ef2011cb>] pstate: 600e0010
- <4>[ 169.344478 / 02-05 18:27:32.797][0] sp : 00000000ef1059b8
- <4>[ 169.344492 / 02-05 18:27:32.797][0] x12: 00000000f6e85301
- <4>[ 169.344504 / 02-05 18:27:32.797][0] x11: 0000000012d814a0 x10: 0000000000000000
- <4>[ 169.344520 / 02-05 18:27:32.797][0] x9 : 00000000f49f4000 x8 : 0000000012d57ae0
- <4>[ 169.344536 / 02-05 18:27:32.797][0] x7 : 0000000000000000 x6 : 00000000f365e12a
- <4>[ 169.344550 / 02-05 18:27:32.797][0] x5 : 00000000000102e8 x4 : 00000000eec28ac0
- <4>[ 169.344565 / 02-05 18:27:32.797][0] x3 : 00000000ef266380 x2 : 00000000ef255674
- <4>[ 169.344579 / 02-05 18:27:32.797][0] x1 : 0000000000000000 x0 : 00000000f3617dc8
- <4>[ 169.344592 / 02-05 18:27:32.797][0]
- <6>[ 169.488066 / 02-05 18:27:32.937][2] [Touch] 1 finger pressed:<0>( 730,2185, 45)
- <6>[ 169.572002 / 02-05 18:27:33.027][1] [Touch] finger released:<0>( 730,2185, 43)
- <6>[ 170.017573 / 02-05 18:27:33.467][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 170.116416 / 02-05 18:27:33.567][3] msm8994_quat_mi2s_snd_shutdown: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0
- <6>[ 170.197067 / 02-05 18:27:33.647][1] [Touch] 1 finger pressed:<0>(1239,1501, 44)
- <6>[ 170.292827 / 02-05 18:27:33.747][1] [Touch] finger released:<0>(1240,1501, 45)
- <5>[ 170.520596 / 02-05 18:27:33.977][1] pet_watchdog
- <6>[ 170.730904 / 02-05 18:27:34.187][1] [Touch] 1 finger pressed:<0>(1175,1481, 46)
- <6>[ 170.779254 / 02-05 18:27:34.237][1] [Touch] finger released:<0>(1175,1481, 43)
- <6>[ 170.140212 / 02-05 18:27:34.247][1] msm8994_quat_mi2s_snd_shutdown Quaternary MI2S Clock is Disabled
- <6>[ 170.790420 / 02-05 18:27:34.247][1] CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
- <6>[ 170.815956 / 02-05 18:27:34.267][0] msm8994_quat_mi2s_snd_startup: dai name qcom,msm-dai-q6-mi2s-quat.213 ffffffc0daaf1410 substream = subdevice #0 stream = 0 bit width =2 sample rate =48000
- <6>[ 171.199316 / 02-05 18:27:34.657][1] [Touch] 1 finger pressed:<0>( 880,2218, 45)
- <6>[ 171.248076 / 02-05 18:27:34.697][1] [Touch] finger released:<0>( 880,2218, 45)
- <6>[ 172.102407 / 02-05 18:27:35.557][1] [MAX17050] [MAX17050_PRINT_INFO]=F_cap=2902,recap=1586,Ibatt=134,Iavg=-66,Empty=6143,Vbatt=3880,OCV=3880,SoC=58,AfterSoCRep=580,Raw=546,AfterSocVF=584,Raw=549,Rcomp0=0x3B,temp=29,learn=0x2633
- <6>[ 172.171254 / 02-05 18:27:35.627][1] [Touch] 1 finger pressed:<0>( 819,1631, 44)
- <6>[ 172.187182 / 02-05 18:27:35.637][1] [Touch] finger released:<0>( 819,1631, 45)
- <6>[ 172.995331 / 02-05 18:27:36.447][1] [Touch] 1 finger pressed:<0>(1229,1641, 46)
- <6>[ 173.075315 / 02-05 18:27:36.527][1] [Touch] finger released:<0>(1229,1641, 46)
- <6>[ 174.457060 / 02-05 18:27:37.907][0] CFG80211-TRACE) wl_escan_handler : SCAN COMPLETED: scanned AP count=4
- <6>[ 174.836497 / 02-05 18:27:38.287][2] [Touch] 1 finger pressed:<0>(1188,2610, 45)
- <6>[ 174.848817 / 02-05 18:27:38.307][0] [LGE VIBRATOR] qpnp_hap_play play : 1 voltage : 2088
- <6>[ 174.858782 / 02-05 18:27:38.317][0] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 174.902228 / 02-05 18:27:38.357][1] [Touch] finger released:<0>(1189,2610, 45)
- <6>[ 174.913034 / 02-05 18:27:38.367][0] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 175.672736 / 02-05 18:27:39.127][2] [Touch] 1 finger pressed:<0>( 956,1882, 45)
- <6>[ 175.723110 / 02-05 18:27:39.177][1] [Touch] finger released:<0>( 956,1882, 47)
- <6>[ 176.060060 / 02-05 18:27:39.517][0] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 176.547975 / 02-05 18:27:39.997][1] [Touch] 1 finger pressed:<0>( 886,1921, 47)
- <6>[ 176.629557 / 02-05 18:27:40.087][1] [Touch] finger released:<0>( 889,1920, 45)
- <6>[ 178.593202 / 02-05 18:27:42.047][1] [Touch] 1 finger pressed:<0>(1222,1865, 45)
- <6>[ 178.690306 / 02-05 18:27:42.147][1] [Touch] finger released:<0>(1222,1865, 45)
- <6>[ 179.293640 / 02-05 18:27:42.747][1] [Touch] 1 finger pressed:<0>( 295,2694, 44)
- <6>[ 179.300891 / 02-05 18:27:42.757][1] [LGE VIBRATOR] qpnp_hap_play play : 1 voltage : 2088
- <6>[ 179.310896 / 02-05 18:27:42.767][1] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 179.363738 / 02-05 18:27:42.817][1] [LGE VIBRATOR] qpnp_hap_play play : 0 voltage : 2088
- <6>[ 179.394453 / 02-05 18:27:42.847][1] [Touch] finger released:<0>( 292,2687, 45)
- <6>[ 180.467160 / 02-05 18:27:43.917][1] [Touch] 1 finger pressed:<0>( 229,1425, 46)
- <6>[ 180.517543 / 02-05 18:27:43.967][1] [Touch] finger released:<0>( 229,1425, 44)
- <5>[ 180.541238 / 02-05 18:27:43.997][1] pet_watchdog
- <6>[ 181.776776 / 02-05 18:27:45.227][2] [Touch] 1 finger pressed:<0>(1162,1713, 44)
- <6>[ 181.857086 / 02-05 18:27:45.307][1] [Touch] finger released:<0>(1162,1713, 46)
- <11>[ 181.910526 / 02-05 18:27:45.367][0] init: untracked pid 8097 exited with status 0
- <6>[ 182.080182 / 02-05 18:27:45.537][0] [XO_THERM] Result:34 Raw:31825
- <6>[ 182.081470 / 02-05 18:27:45.537][0] [BOARD_THERM] Result:294 Raw:36784
- <6>[ 182.081482 / 02-05 18:27:45.537][0] [VS_THERM] Result:316
- <6>[ 182.102320 / 02-05 18:27:45.557][2] [FS] mmc2: sdhci_msm_execute_tuning: finally setting the tuning phase to 10
- <6>[ 182.241694 / 02-05 18:27:45.697][1] [CC] [C], USB_PRESENT, WIRELESS_PRESENT, USB_TYPE, CABLE_INFO, USBIN_VOL, BATT_FAKE, BATT_TEMP, BATT_SOC, BATT_VOL, PMI_IUSB_SET, PMI_IUSB_AICL, PMI_IBAT_SET, TOTAL_IBAT_NOW
- <6>[ 182.241727 / 02-05 18:27:45.697][1] [CC] [I], 1, 0, USB, OPEN, 4954, FAKE_OFF, 29, 58, 3826, 500, 0, 2000, 138
- <6>[ 182.247210 / 02-05 18:27:45.697][1] [CC] charge_type = 3
- <12>[ 182.256603 / 02-05 18:27:45.707][1] healthd: charger_controller: Unknown power supply type
- <6>[ 182.527512 / 02-05 18:27:45.977][1] [Touch] 1 finger pressed:<0>(1047,1707, 44)
- <6>[ 182.578363 / 02-05 18:27:46.027][1] [Touch] finger released:<0>(1047,1707, 43)
- <6>[ 183.668442 / 02-05 18:27:47.117][1] [Touch] 1 finger pressed:<0>( 697,1484, 46)
- <6>[ 183.735616 / 02-05 18:27:47.187][1] [Touch] finger released:<0>( 697,1484, 47)
- <6>[ 184.372861 / 02-05 18:27:47.827][1] [Touch] 1 finger pressed:<0>( 265,1463, 46)
- <6>[ 184.439744 / 02-05 18:27:47.897][1] [Touch] finger released:<0>( 265,1463, 47)
- <6>[ 185.043346 / 02-05 18:27:48.497][1] [Touch] 1 finger pressed:<0>(1202,1730, 46)
- <6>[ 185.110167 / 02-05 18:27:48.567][1] [Touch] finger released:<0>(1202,1730, 45)
- <6>[ 185.119540 / 02-05 18:27:48.577][1] [CC] current batt_temp[29], batt_temp_state[0], current batt_volt[3881], batt_volt_state[0]
Add Comment
Please, Sign In to add comment