Advertisement
lancethepants

Untitled

Dec 11th, 2020
59
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.53 KB | None | 0 0
  1. === START OF INFORMATION SECTION ===
  2. Model Family: Seagate Barracuda 3.5
  3. Device Model: ST4000DM005-2DP166
  4. Serial Number: ZDH1B3DW
  5. LU WWN Device Id: 5 000c50 0a2a9896c
  6. Firmware Version: 0001
  7. User Capacity: 4,000,787,030,016 bytes [4.00 TB]
  8. Sector Sizes: 512 bytes logical, 4096 bytes physical
  9. Rotation Rate: 5980 rpm
  10. Form Factor: 3.5 inches
  11. Device is: In smartctl database [for details use: -P show]
  12. ATA Version is: ACS-3 T13/2161-D revision 5
  13. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
  14. Local Time is: Fri Dec 11 07:37:30 2020 MST
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: PASSED
  20.  
  21. General SMART Values:
  22. Offline data collection status: (0x82) Offline data collection activity
  23. was completed without error.
  24. Auto Offline Data Collection: Enabled.
  25. Self-test execution status: ( 0) The previous self-test routine completed
  26. without error or no self-test has ever
  27. been run.
  28. Total time to complete Offline
  29. data collection: ( 591) seconds.
  30. Offline data collection
  31. capabilities: (0x7b) SMART execute Offline immediate.
  32. Auto Offline data collection on/off support.
  33. Suspend Offline collection upon new
  34. command.
  35. Offline surface scan supported.
  36. Self-test supported.
  37. Conveyance Self-test supported.
  38. Selective Self-test supported.
  39. SMART capabilities: (0x0003) Saves SMART data before entering
  40. power-saving mode.
  41. Supports SMART auto save timer.
  42. Error logging capability: (0x01) Error logging supported.
  43. General Purpose Logging supported.
  44. Short self-test routine
  45. recommended polling time: ( 1) minutes.
  46. Extended self-test routine
  47. recommended polling time: ( 649) minutes.
  48. Conveyance self-test routine
  49. recommended polling time: ( 2) minutes.
  50. SCT capabilities: (0x10a5) SCT Status supported.
  51. SCT Data Table supported.
  52.  
  53. SMART Attributes Data Structure revision number: 10
  54. Vendor Specific SMART Attributes with Thresholds:
  55. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  56. 1 Raw_Read_Error_Rate 0x000f 070 064 006 Pre-fail Always - 10841104
  57. 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0
  58. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 68
  59. 5 Reallocated_Sector_Ct 0x0033 099 099 010 Pre-fail Always - 0
  60. 7 Seek_Error_Rate 0x000f 090 060 045 Pre-fail Always - 1059518434
  61. 9 Power_On_Hours 0x0032 065 065 000 Old_age Always - 31509 (192 0 0)
  62. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  63. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 68
  64. 183 Runtime_Bad_Block 0x0032 091 091 000 Old_age Always - 9
  65. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  66. 187 Reported_Uncorrect 0x0032 076 076 000 Old_age Always - 24
  67. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 0 0 3
  68. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  69. 190 Airflow_Temperature_Cel 0x0022 069 060 040 Old_age Always - 31 (Min/Max 29/37)
  70. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  71. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 222
  72. 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 299907
  73. 194 Temperature_Celsius 0x0022 031 040 000 Old_age Always - 31 (0 16 0 0 0)
  74. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  75. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  76. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  77. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 12903h+08m+37.304s
  78. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 36657192505
  79. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 209858790409
  80.  
  81. SMART Error Log Version: 1
  82. ATA Error Count: 24 (device log contains only the most recent five errors)
  83. CR = Command Register [HEX]
  84. FR = Features Register [HEX]
  85. SC = Sector Count Register [HEX]
  86. SN = Sector Number Register [HEX]
  87. CL = Cylinder Low Register [HEX]
  88. CH = Cylinder High Register [HEX]
  89. DH = Device/Head Register [HEX]
  90. DC = Device Command Register [HEX]
  91. ER = Error register [HEX]
  92. ST = Status register [HEX]
  93. Powered_Up_Time is measured from power on, and printed as
  94. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  95. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  96.  
  97. Error 24 occurred at disk power-on lifetime: 31273 hours (1303 days + 1 hours)
  98. When the command that caused the error occurred, the device was active or idle.
  99.  
  100. After command completion occurred, registers were:
  101. ER ST SC SN CL CH DH
  102. -- -- -- -- -- -- --
  103. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  104.  
  105. Commands leading to the command that caused the error were:
  106. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  107. -- -- -- -- -- -- -- -- ---------------- --------------------
  108. 60 00 00 ff ff ff 4f 00 14d+05:58:54.688 READ FPDMA QUEUED
  109. 60 00 00 ff ff ff 4f 00 14d+05:58:51.123 READ FPDMA QUEUED
  110. 60 00 00 ff ff ff 4f 00 14d+05:58:51.075 READ FPDMA QUEUED
  111. 60 00 00 ff ff ff 4f 00 14d+05:58:50.998 READ FPDMA QUEUED
  112. 60 00 00 ff ff ff 4f 00 14d+05:58:50.548 READ FPDMA QUEUED
  113.  
  114. Error 23 occurred at disk power-on lifetime: 31273 hours (1303 days + 1 hours)
  115. When the command that caused the error occurred, the device was active or idle.
  116.  
  117. After command completion occurred, registers were:
  118. ER ST SC SN CL CH DH
  119. -- -- -- -- -- -- --
  120. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  121.  
  122. Commands leading to the command that caused the error were:
  123. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  124. -- -- -- -- -- -- -- -- ---------------- --------------------
  125. 60 00 00 ff ff ff 4f 00 14d+05:58:45.721 READ FPDMA QUEUED
  126. 60 00 00 ff ff ff 4f 00 14d+05:58:45.698 READ FPDMA QUEUED
  127. 60 00 00 ff ff ff 4f 00 14d+05:58:45.698 READ FPDMA QUEUED
  128. 60 00 00 ff ff ff 4f 00 14d+05:58:45.697 READ FPDMA QUEUED
  129. 60 00 00 ff ff ff 4f 00 14d+05:58:45.697 READ FPDMA QUEUED
  130.  
  131. Error 22 occurred at disk power-on lifetime: 31273 hours (1303 days + 1 hours)
  132. When the command that caused the error occurred, the device was active or idle.
  133.  
  134. After command completion occurred, registers were:
  135. ER ST SC SN CL CH DH
  136. -- -- -- -- -- -- --
  137. 40 53 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
  138.  
  139. Commands leading to the command that caused the error were:
  140. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  141. -- -- -- -- -- -- -- -- ---------------- --------------------
  142. 61 00 00 ff ff ff 4f 00 14d+05:58:42.061 WRITE FPDMA QUEUED
  143. 60 00 00 ff ff ff 4f 00 14d+05:58:38.571 READ FPDMA QUEUED
  144. 60 00 00 ff ff ff 4f 00 14d+05:58:38.562 READ FPDMA QUEUED
  145. 61 00 00 ff ff ff 4f 00 14d+05:58:38.066 WRITE FPDMA QUEUED
  146. 61 00 00 ff ff ff 4f 00 14d+05:58:38.066 WRITE FPDMA QUEUED
  147.  
  148. Error 21 occurred at disk power-on lifetime: 31273 hours (1303 days + 1 hours)
  149. When the command that caused the error occurred, the device was active or idle.
  150.  
  151. After command completion occurred, registers were:
  152. ER ST SC SN CL CH DH
  153. -- -- -- -- -- -- --
  154. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  155.  
  156. Commands leading to the command that caused the error were:
  157. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  158. -- -- -- -- -- -- -- -- ---------------- --------------------
  159. 60 00 00 ff ff ff 4f 00 14d+05:58:37.228 READ FPDMA QUEUED
  160. 60 00 00 ff ff ff 4f 00 14d+05:58:33.709 READ FPDMA QUEUED
  161. 60 00 00 ff ff ff 4f 00 14d+05:58:33.662 READ FPDMA QUEUED
  162. 60 00 00 ff ff ff 4f 00 14d+05:58:33.662 READ FPDMA QUEUED
  163. 61 00 08 ff ff ff 4f 00 14d+05:58:33.661 WRITE FPDMA QUEUED
  164.  
  165. Error 20 occurred at disk power-on lifetime: 31273 hours (1303 days + 1 hours)
  166. When the command that caused the error occurred, the device was active or idle.
  167.  
  168. After command completion occurred, registers were:
  169. ER ST SC SN CL CH DH
  170. -- -- -- -- -- -- --
  171. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  172.  
  173. Commands leading to the command that caused the error were:
  174. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  175. -- -- -- -- -- -- -- -- ---------------- --------------------
  176. 60 00 00 ff ff ff 4f 00 14d+05:57:35.173 READ FPDMA QUEUED
  177. 60 00 00 ff ff ff 4f 00 14d+05:57:34.916 READ FPDMA QUEUED
  178. 60 00 00 ff ff ff 4f 00 14d+05:57:34.908 READ FPDMA QUEUED
  179. 60 00 00 ff ff ff 4f 00 14d+05:57:34.901 READ FPDMA QUEUED
  180. 60 00 00 ff ff ff 4f 00 14d+05:57:34.442 READ FPDMA QUEUED
  181.  
  182. SMART Self-test log structure revision number 1
  183. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  184. # 1 Short offline Completed without error 00% 31489 -
  185.  
  186. SMART Selective self-test log data structure revision number 1
  187. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  188. 1 0 0 Not_testing
  189. 2 0 0 Not_testing
  190. 3 0 0 Not_testing
  191. 4 0 0 Not_testing
  192. 5 0 0 Not_testing
  193. Selective self-test flags (0x0):
  194. After scanning selected spans, do NOT read-scan remainder of disk.
  195. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement