Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- sh-3.2# dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.18.31-lineageOS (ubuntu@ubuntu) (gcc version 4.9 20150123 (prerelease) (GCC) ) #7 SMP PREEMPT Thu Apr 11 11:21:25 UTC 2019
- [ 0.000000] CPU: AArch64 Processor [511f2112] revision 2
- [ 0.000000] alternatives: detected feature GIC system register CPU interface
- [ 0.000000] Machine: Sheridan
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 48 MiB
- [ 0.000000] Reserved memory: reserved region for node 'peripheral_region@8ea00000': base 0x000000008ea00000, size 45 MiB
- [ 0.000000] Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088800000, size 98 MiB
- [ 0.000000] Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x0000000083400000, size 0 MiB
- [ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem@83401000': base 0x0000000083401000, size 35 MiB
- [ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
- [ 0.000000] Reserved memory: reserved region for node 'ramoops_mem_region': base 0x00000000af000000, size 0 MiB
- [ 0.000000] Reserved memory: reserved region for node 'tzlog_bck_region': base 0x00000000aefe8000, size 0 MiB
- [ 0.000000] Reserved memory: reserved region for node 'wdog_cpuctx_region': base 0x00000000aefea000, size 0 MiB
- [ 0.000000] Removed memory: created DMA memory pool at 0x0000000085800000, size 48 MiB
- [ 0.000000] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
- [ 0.000000] Removed memory: created DMA memory pool at 0x000000008ea00000, size 45 MiB
- [ 0.000000] Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
- [ 0.000000] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
- [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
- [ 0.000000] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
- [ 0.000000] Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
- [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
- [ 0.000000] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
- [ 0.000000] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
- [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
- [ 0.000000] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
- [ 0.000000] Removed memory: created DMA memory pool at 0x0000000088800000, size 98 MiB
- [ 0.000000] Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
- [ 0.000000] cma: Reserved 32 MiB at 0x00000000f6800000
- [ 0.000000] On node 0 totalpages: 992696
- [ 0.000000] DMA zone: 7426 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 475240 pages, LIFO batch:31
- [ 0.000000] Normal zone: 8086 pages used for memmap
- [ 0.000000] Normal zone: 517456 pages, LIFO batch:31
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: Initializing psci_cpu_init
- [ 0.000000] psci: Initializing psci_cpu_init
- [ 0.000000] psci: Initializing psci_cpu_init
- [ 0.000000] PERCPU: Embedded 13 pages/cpu @ffffffc0fe30c000 s20736 r0 d32512 u53248
- [ 0.000000] pcpu-alloc: s20736 r0 d32512 u53248 alloc=13*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 977184
- [ 0.000000] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 app_setting.use_32bit_app_setting=1 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff selinux=0 audit=0 cnsscore.pcie_link_down_panic=1 androidboot.bootdevice=624000.ufshc androidboot.serialno=ZY223LT4KZ androidboot.baseband=msm androidboot.mode=normal androidboot.device=sheridan androidboot.hwrev=0x83B0 androidboot.radio=ROW androidboot.powerup_reason=0x00004000 androidboot.bootreason=reboot msm_poweroff.download_mode=0 androidboot.fsg-id= androidboot.wifimacaddr=68:C4:4D:9E:18:C2,68:C4:4D:9E:18:C3 androidboot.btmacaddr=68:C4:4D:9E:18:C1 mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_mot_smd_546_QHD_g_cmd_v0 androidboot.bootloader=0x901A androidboot.carrier=reteu androidboot.poweroff_alarm=0 androidboot.build_vars=black androidboot.hardware.sku=XT1650-03 androidboot.secure_hardware=1 androidboot.bl_state=2 androidboot.cid=0x32 androidboot.uid=F
- [ 0.000000] audit: disabled (until reboot)
- [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes
- [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes
- [ 0.000000] log_buf_len min size: 131072 bytes
- [ 0.000000] log_buf_len: 262144 bytes
- [ 0.000000] early log buf free: 125444(95%)
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Memory: 3641428K/3970784K available (14783K kernel code, 1865K rwdata, 7972K rodata, 516K init, 3326K bss, 329356K reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] HMP scheduling enabled.
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] CPU0: found redistributor 0 region 0:0x0000000009c00000
- [ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
- [ 0.000000] MPM 1 irq mapping errored -517
- [ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
- [ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
- [ 0.000018] Switched to clocksource arch_sys_counter
- [ 0.000867] Console: colour dummy device 80x25
- [ 0.001358] console [tty0] enabled
- [ 0.002837] allocated 16777216 bytes of page_cgroup
- [ 0.002848] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.002867] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
- [ 0.002881] pid_max: default: 32768 minimum: 301
- [ 0.002941] Security Framework initialized
- [ 0.002956] Yama: becoming mindful.
- [ 0.002998] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.003009] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.003512] Initializing cgroup subsys memory
- [ 0.003535] Initializing cgroup subsys devices
- [ 0.003548] Initializing cgroup subsys freezer
- [ 0.003560] Initializing cgroup subsys net_cls
- [ 0.003570] Initializing cgroup subsys blkio
- [ 0.003580] Initializing cgroup subsys bfqio
- [ 0.003591] Initializing cgroup subsys perf_event
- [ 0.003849] /cpus/cpu@0: Unknown CPU type
- [ 0.003865] /cpus/cpu@1: Unknown CPU type
- [ 0.003877] /cpus/cpu@100: Unknown CPU type
- [ 0.003890] /cpus/cpu@101: Unknown CPU type
- [ 0.003927] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available
- [ 0.003957] EFI services will not be available.
- [ 0.004067] NOHZ: local_softirq_pending 02
- [ 0.008274] MSM Memory Dump base table set up
- [ 0.008307] MSM Memory Dump apps data table set up
- [ 0.008332] hyp_assign_table is not functional as qcom_secure_mem is not allocated.
- [ 0.009927] clock-cpu-8996: configuring clocks for the perf cluster
- [ 0.010178] cpu_clock_8996_early_init: finished CPU clock configuration
- [ 0.012200] CPU1: found redistributor 1 region 0:0x0000000009c40000
- [ 0.014190] CPU2: found redistributor 100 region 0:0x0000000009c80000
- [ 0.016003] CPU3: found redistributor 101 region 0:0x0000000009cc0000
- [ 0.016140] Brought up 4 CPUs
- [ 0.016190] SMP: Total of 4 processors activated.
- [ 0.017055] devtmpfs: initialized
- [ 0.019491] DMI not present or invalid.
- [ 0.026969] pinctrl core: initialized pinctrl subsystem
- [ 0.027329] regulator-dummy: no parameters
- [ 0.086464] NET: Registered protocol family 16
- [ 0.090096] cpuidle: using governor ladder
- [ 0.106729] cpuidle: using governor menu
- [ 0.120108] cpuidle: using governor qcom
- [ 0.121784] vdso: 2 pages (1 code @ ffffffc000eed000, 1 data @ ffffffc001760000)
- [ 0.122247] software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc07fc00000-ffffffc07fffffff]
- [ 0.123073] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.137157] qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch
- [ 0.138216] sps:sps is ready.
- [ 0.140103] irq: no irq domain found for /soc/pinctrl@01010000 !
- [ 0.141868] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
- [ 0.167708] smd_channel_probe_now: allocation table not initialized
- [ 0.168017] smd_channel_probe_now: allocation table not initialized
- [ 0.168311] smd_channel_probe_now: allocation table not initialized
- [ 0.168620] smd_channel_probe_now: allocation table not initialized
- [ 0.168888] msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
- [ 0.169673] msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
- [ 0.170496] msm_rpm_dev_probe: APSS-RPM communication over GLINK
- [ 0.178969] spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
- [ 0.180719] spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
- [ 0.184988] pmi8994_s2: 400 <--> 1015 mV at 1000 mV normal idle
- [ 0.185770] platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
- [ 0.186388] platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
- [ 0.187308] platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
- [ 0.188055] platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
- [ 0.190809] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
- [ 0.190848] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
- [ 0.190878] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- [ 0.190902] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- [ 0.191022] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
- [ 0.191036] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
- [ 0.191053] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
- [ 0.191073] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
- [ 0.196189] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
- [ 0.200012] smd_channel_probe_now: allocation table not initialized
- [ 0.200278] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
- [ 0.201049] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
- [ 0.201164] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
- [ 0.201330] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
- [ 0.201626] msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
- [ 0.203728] apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
- [ 0.204085] apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
- [ 0.204431] apcc_l3_mem_acc_corner: 0 <--> 0 mV
- [ 0.204756] gfx_mem_acc_corner: 0 <--> 0 mV
- [ 0.205178] kryo0-retention: 468 <--> 892 mV at 520 mV
- [ 0.205370] kryo0: 468 <--> 892 mV at 754 mV
- [ 0.205511] kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
- [ 0.205842] kryo1-retention: 468 <--> 892 mV at 520 mV
- [ 0.206029] kryo1: 468 <--> 892 mV at 754 mV
- [ 0.206156] kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
- [ 0.211081] platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
- [ 0.212582] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
- [ 0.231325] __of_mpm_init(): MPM driver mapping exists
- [ 0.231791] persistent_ram: persistent_ram: paddr: 00000000af000000, vaddr: ffffff8000440000, buf size = 0x1fff4
- [ 0.231840] persistent_ram: persistent_ram: paddr: 00000000af020000, vaddr: ffffff8001c00000, buf size = 0x3fff4
- [ 0.231863] persistent_ram: persistent_ram: paddr: 00000000af060000, vaddr: ffffff8000420000, buf size = 0x7f4
- [ 0.232516] console [pstore-1] enabled
- [ 0.232528] pstore: Registered ramoops as persistent store backend
- [ 0.232543] ramoops: attached 0x80000@0xaf000000, ecc: 0/0
- [ 0.238532] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
- [ 0.239376] pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.239803] pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.240221] pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- [ 0.240651] pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.241011] pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- [ 0.241435] pm8994_s3: 1300 mV normal idle
- [ 0.241843] pm8994_s4: 1800 mV normal idle
- [ 0.242251] pm8994_s5: 2150 mV normal idle
- [ 0.242655] pm8994_s7: 800 mV normal idle
- [ 0.243071] pm8994_l1: 1000 mV normal idle
- [ 0.243525] pm8994_l2: 1250 mV normal idle
- [ 0.244166] pm8994_l3: 1000 mV normal idle
- [ 0.244584] pm8994_l4: 1225 mV normal idle
- [ 0.244990] pm8994_l6: 1200 mV normal idle
- [ 0.245405] pm8994_l8: 1800 mV normal idle
- [ 0.245813] pm8994_l9: 1800 mV normal idle
- [ 0.246232] pm8994_l10: 1800 mV normal idle
- [ 0.246638] pm8994_l11: 1100 <--> 1300 mV at 1250 mV normal idle
- [ 0.247102] pm8994_l12: 1800 mV normal idle
- [ 0.247853] pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle
- [ 0.248274] pm8994_l14: 1800 mV normal idle
- [ 0.248979] pm8994_l15: 1800 mV normal idle
- [ 0.249401] pm8994_l16: 2700 mV normal idle
- [ 0.250086] pm8994_l17: 3000 mV normal idle
- [ 0.250506] pm8994_l18: 2700 <--> 2900 mV at 2700 mV normal idle
- [ 0.250865] pm8994_l18_pin_ctrl: 2700 <--> 2900 mV at 2700 mV normal idle
- [ 0.251388] pm8994_l19: 3100 mV normal idle
- [ 0.251796] pm8994_l20: 2950 mV normal idle
- [ 0.252222] pm8994_l21: 2950 mV normal idle
- [ 0.252738] pm8994_l22: 3300 mV normal idle
- [ 0.253152] pm8994_l23: 1850 mV normal idle
- [ 0.253611] pm8994_l24: 3075 mV normal idle
- [ 0.254035] pm8994_l25: 1200 mV normal idle
- [ 0.254708] pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.255069] pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.255501] pm8994_l27: 1275 mV normal idle
- [ 0.255921] pm8994_l28: 925 mV normal idle
- [ 0.256645] pm8994_l29: 2800 mV normal idle
- [ 0.257104] pm8994_l30: 1800 mV normal idle
- [ 0.257524] pm8994_l32: 1800 mV normal idle
- [ 0.257920] pm8994_lvs1: no parameters
- [ 0.260051] pm8994_lvs2: no parameters
- [ 0.260445] pmi8994_s1: 1025 mV normal idle
- [ 0.260846] pmi8994_boost_5v: no parameters
- [ 0.261180] pmi8994_boost_pin_ctrl: no parameters
- [ 0.261563] pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
- [ 0.261908] pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle
- [ 0.262121] pm8994_s11_avs_limit: 470 <--> 1140 mV
- [ 0.262244] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
- [ 0.263157] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
- [ 0.263190] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
- [ 0.263213] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
- [ 0.263235] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- [ 0.263261] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- [ 0.263668] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
- [ 0.263689] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
- [ 0.263709] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
- [ 0.263731] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
- [ 0.264204] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
- [ 0.264448] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
- [ 0.283077] qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
- [ 0.284132] vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
- [ 0.284166] vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
- [ 0.284186] vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
- [ 0.284437] vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
- [ 0.284459] vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
- [ 0.284477] vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
- [ 0.284744] cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
- [ 0.284764] cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
- [ 0.284781] cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
- [ 0.293789] qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
- [ 0.296168] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
- [ 0.296210] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
- [ 0.296232] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
- [ 0.296255] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- [ 0.296280] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- [ 0.296476] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
- [ 0.296494] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
- [ 0.296513] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
- [ 0.296534] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
- [ 0.297131] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
- [ 0.297154] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6
- [ 0.297171] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
- [ 0.297188] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
- [ 0.297204] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
- [ 0.297223] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
- [ 0.297430] cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
- [ 0.297625] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 575000 uV
- [ 0.297646] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 665000 uV
- [ 0.297664] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 775000 uV
- [ 0.297681] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 920000 uV
- [ 0.297776] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 311
- [ 0.297795] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 475, quot_offset[ 7]= 120
- [ 0.297815] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 705, quot_offset[ 7]= 230
- [ 0.297833] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 978, quot_offset[ 7]= 270
- [ 0.297964] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
- [ 0.297981] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6
- [ 0.297998] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
- [ 0.298014] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
- [ 0.298031] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
- [ 0.298051] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
- [ 0.298191] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 575000 uV
- [ 0.298209] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 665000 uV
- [ 0.298226] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 775000 uV
- [ 0.298244] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 920000 uV
- [ 0.298296] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 311
- [ 0.298315] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 475, quot_offset[ 7]= 120
- [ 0.298334] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 705, quot_offset[ 7]= 230
- [ 0.298352] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 978, quot_offset[ 7]= 270
- [ 0.298462] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
- [ 0.298478] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6
- [ 0.298494] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
- [ 0.298511] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
- [ 0.298527] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
- [ 0.298546] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
- [ 0.298755] cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
- [ 0.298980] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 575000 uV
- [ 0.299001] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 645000 uV
- [ 0.299018] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 725000 uV
- [ 0.299034] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop= 980000 uV
- [ 0.299154] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 318
- [ 0.299172] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 439, quot_offset[ 7]= 80
- [ 0.299191] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 605, quot_offset[ 7]= 165
- [ 0.299209] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1082, quot_offset[ 7]= 475
- [ 0.299684] cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
- [ 0.299844] apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
- [ 0.300088] apc0_cbf_corner: 0 <--> 0 mV at 0 mV
- [ 0.303374] cpr3_regulator_measure_aging: apcc: average quotient delta=13 (count=10)
- [ 0.303408] cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=937 uV
- [ 0.303917] apc1_corner: 0 <--> 0 mV at 0 mV
- [ 0.305379] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4
- [ 0.305406] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
- [ 0.305678] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 620000 uV
- [ 0.305698] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 665000 uV
- [ 0.305716] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 775000 uV
- [ 0.305733] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 875000 uV
- [ 0.305911] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
- [ 0.306047] gfx_corner: 0 <--> 0 mV at 0 mV
- [ 0.307376] cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
- [ 0.309430] clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu0
- [ 0.309479] clock-cpu-8996: set OPP pair (1593600000 Hz, 895000 uv) on cpu0
- [ 0.309504] clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu1
- [ 0.309548] clock-cpu-8996: set OPP pair (1593600000 Hz, 895000 uv) on cpu1
- [ 0.309575] clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu2
- [ 0.309634] clock-cpu-8996: set OPP pair (2150400000 Hz, 965000 uv) on cpu2
- [ 0.309659] clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu3
- [ 0.309716] clock-cpu-8996: set OPP pair (2150400000 Hz, 965000 uv) on cpu3
- [ 0.309858] clock-cpu-8996: set OPP pair (307200000 Hz, 620000 uv) on soc:qcom,m4m
- [ 0.309910] clock-cpu-8996: set OPP pair (1593600000 Hz, 895000 uv) on soc:qcom,m4m
- [ 0.310334] qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
- [ 0.310719] gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 550000 uV) on b00000.qcom,kgsl-3d0
- [ 0.310753] gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 875000 uV) on b00000.qcom,kgsl-3d0
- [ 0.312222] qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
- [ 0.313032] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
- [ 0.313065] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
- [ 0.313088] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
- [ 0.313111] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- [ 0.313136] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- [ 0.313494] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
- [ 0.313517] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
- [ 0.313535] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
- [ 0.313567] msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
- [ 0.314760] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
- [ 0.314787] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
- [ 0.314806] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
- [ 0.315054] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
- [ 0.315188] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.315208] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.315935] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
- [ 0.316027] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.316048] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
- [ 0.317480] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
- [ 0.317575] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.317596] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
- [ 0.319196] i2c-msm-v2 7579000.i2c: probing driver i2c-msm-v2
- [ 0.319312] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.319334] i2c-msm-v2 7579000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.357403] KPI: Bootloader start count = 62874
- [ 0.357430] KPI: Bootloader end count = 262122
- [ 0.357443] KPI: Bootloader display count = 1752737783
- [ 0.357456] KPI: Bootloader load kernel count = 4466
- [ 0.357470] KPI: Kernel MPM timestamp = 283536
- [ 0.357481] KPI: Kernel MPM Clock frequency = 32768
- [ 0.357508] socinfo_print: v0.11, id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=1, hw_plat_ver=65536
- [ 0.357782] gdsc_mmagic_bimc: no parameters
- [ 0.358539] rome_vreg: no parameters
- [ 0.358897] wlan_en_vreg: no parameters
- [ 0.359415] vreg_5p0: no parameters
- [ 0.359619] dummy_vreg: no parameters
- [ 0.360366] vbat_disp: no parameters
- [ 0.361066] vdd3_disp: no parameters
- [ 0.361122] vdd3_disp: supplied by pm8994_s4
- [ 0.361647] vgaarb: loaded
- [ 0.362864] SCSI subsystem initialized
- [ 0.363921] usbcore: registered new interface driver usbfs
- [ 0.363973] usbcore: registered new interface driver hub
- [ 0.364119] usbcore: registered new device driver usb
- [ 0.364517] soc:usb_nop_phy supply vcc not found, using dummy regulator
- [ 0.365168] media: Linux media interface: v0.10
- [ 0.365225] Linux video capture interface: v2.00
- [ 0.387454] cpufreq: driver msm up and running
- [ 0.388038] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
- [ 0.388209] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
- [ 0.388373] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
- [ 0.388685] ION heap system created
- [ 0.388788] ION heap adsp created at 0x00000000ff800000 with size 400000
- [ 0.388800] ION heap qsecom created at 0x00000000fe400000 with size 1400000
- [ 0.388810] ION heap secure_display created at 0x00000000f8800000 with size 5c00000
- [ 0.388827] ION heap secure_heap created
- [ 0.389576] msm_bus_fabric_init_driver
- [ 0.392664] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
- [ 0.392683] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
- [ 0.395403] msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
- [ 0.395853] msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
- [ 0.401384] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
- [ 0.401400] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
- [ 0.401413] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
- [ 0.401524] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- [ 0.401549] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- [ 0.401573] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- [ 0.401597] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- [ 0.401620] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- [ 0.401643] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- [ 0.401667] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- [ 0.403054] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
- [ 0.403080] qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
- [ 0.403210] input: qpnp_pon as /devices/virtual/input/input0
- [ 0.403659] pon_spare_reg: no parameters
- [ 0.403710] qcom,qpnp-power-on qpnp-power-on-12: No PON config. specified
- [ 0.403768] qcom,qpnp-power-on qpnp-power-on-12: PMIC@SID2 Power-on reason: Triggered from USB (USB charger insertion) and 'cold' boot
- [ 0.403787] qcom,qpnp-power-on qpnp-power-on-12: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
- [ 0.403946] PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
- [ 0.404036] PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
- [ 0.405152] ipa ipa2_uc_state_check:296 uC interface not initialized
- [ 0.405168] ipa ipa_sps_irq_control_all:938 EP (2) not allocated.
- [ 0.405174] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
- [ 0.407160] sps:BAM 0x0000000000684000 is registered.
- [ 0.407895] ipa ipa2_uc_state_check:296 uC interface not initialized
- [ 0.408119] sps:BAM 0x0000000000684000 (va:0xffffff8001540000) enabled: ver:0x27, number of pipes:20
- [ 0.409499] ipa ipa2_uc_state_check:296 uC interface not initialized
- [ 0.415612] ipa ipa2_uc_state_check:296 uC interface not initialized
- [ 0.417646] IPA driver initialization was successful.
- [ 0.419028] gdsc_mmagic_video: no parameters
- [ 0.419264] gdsc_mmagic_mdss: no parameters
- [ 0.419418] gdsc_mmagic_camss: no parameters
- [ 0.419662] gdsc_venus: no parameters
- [ 0.419685] gdsc_venus: supplied by gdsc_mmagic_video
- [ 0.419848] gdsc_venus_core0: fast normal
- [ 0.420116] gdsc_venus_core1: fast normal
- [ 0.420293] gdsc_camss_top: no parameters
- [ 0.420312] gdsc_camss_top: supplied by gdsc_mmagic_camss
- [ 0.420494] gdsc_vfe0: no parameters
- [ 0.420514] gdsc_vfe0: supplied by gdsc_camss_top
- [ 0.420701] gdsc_vfe1: no parameters
- [ 0.420721] gdsc_vfe1: supplied by gdsc_camss_top
- [ 0.420881] gdsc_mdss: no parameters
- [ 0.420901] gdsc_mdss: supplied by gdsc_mmagic_mdss
- [ 0.421180] gdsc_jpeg: no parameters
- [ 0.421199] gdsc_jpeg: supplied by gdsc_camss_top
- [ 0.421384] gdsc_cpp: no parameters
- [ 0.421405] gdsc_cpp: supplied by gdsc_camss_top
- [ 0.421554] gdsc_pcie_0: no parameters
- [ 0.421708] gdsc_pcie_1: no parameters
- [ 0.421848] gdsc_pcie_2: no parameters
- [ 0.422006] gdsc_usb30: no parameters
- [ 0.422137] gdsc_ufs: no parameters
- [ 0.422322] gdsc_fd: no parameters
- [ 0.422342] gdsc_fd: supplied by gdsc_camss_top
- [ 0.422521] gdsc_gpu: no parameters
- [ 0.422727] gdsc_gpu_gx: no parameters
- [ 0.423109] gdsc_gpu_gx: supplied by gfx_corner
- [ 0.423288] gdsc_hlos1_vote_aggre0_noc: no parameters
- [ 0.423581] gdsc_hlos1_vote_lpass_adsp: no parameters
- [ 0.423711] gdsc_hlos1_vote_lpass_core: no parameters
- [ 0.423871] gdsc_aggre0_noc: no parameters
- [ 0.426228] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
- [ 0.426262] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
- [ 0.428675] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
- [ 0.428768] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
- [ 0.428779] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
- [ 0.429887] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
- [ 0.430519] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
- [ 0.430567] mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
- [ 0.430577] mdss_pll_probe: Unable to get the cell-index rc=-22
- [ 0.562873] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.563728] Bluetooth: ffffffc0f98a3d20
- [ 0.563764] NET: Registered protocol family 31
- [ 0.563780] Bluetooth: ffffffc0f98a3d20
- [ 0.563792] Bluetooth: ffffffc0f98a3d00Bluetooth: ffffffc0f98a3cd0Bluetooth: ffffffc0f98a3ce0
- [ 0.564218] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.564253] cfg80211: World regulatory domain updated:
- [ 0.564262] cfg80211: DFS Master region: unset
- [ 0.564270] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 0.564288] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.564298] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.564307] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.564316] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.564326] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.564335] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.564344] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.564353] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 0.564602] pcie:pcie_init.
- [ 0.568023] 608000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
- [ 0.570857] msm_pcie_get_resources: PCIe: RC1 can't get tcsr resource.
- [ 0.574000] Switched to clocksource arch_sys_counter
- [ 0.611774] bcl_peripheral:bcl_perph_init BCL Initialized
- [ 0.617481] NET: Registered protocol family 2
- [ 0.618179] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
- [ 0.618273] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.618597] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.618749] TCP: reno registered
- [ 0.618767] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.618794] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.619181] NET: Registered protocol family 1
- [ 0.619247] PCI: CLS 0 bytes, default 64
- [ 0.619655] Trying to unpack rootfs image as initramfs...
- [ 0.635629] Freeing initrd memory: 820K (ffffffc002c00000 - ffffffc002ccd000)
- [ 0.637983] kryo perfevents: CPU pmu for kryo-pmuv3 detected
- [ 0.643839] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.643957] Initialise system trusted keyring
- [ 0.644551] vmscan: error setting kswapd cpu affinity mask
- [ 0.647604] VFS: Disk quotas dquot_6.5.2
- [ 0.647711] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.648556] exFAT: Version 1.2.9
- [ 0.649037] Registering esdfs 0.2
- [ 0.649190] fuse init (API version 7.23)
- [ 0.649534] msgmni has been set to 7409
- [ 0.651458] Key type asymmetric registered
- [ 0.651479] Asymmetric key parser 'x509' registered
- [ 0.651491] Key type pkcs7_test registered
- [ 0.651649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- [ 0.651666] io scheduler noop registered
- [ 0.651676] io scheduler deadline registered
- [ 0.651737] io scheduler cfq registered (default)
- [ 0.651803] io scheduler bfq registered
- [ 0.651812] BFQ I/O-scheduler: v7r8
- [ 0.664442] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
- [ 0.665772] No change in context(0==0), skip
- [ 0.666888] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
- [ 0.666901] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
- [ 0.666909] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
- [ 0.666918] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
- [ 0.666944] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
- [ 0.666954] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
- [ 0.666962] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
- [ 0.666970] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
- [ 0.666988] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
- [ 0.666996] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
- [ 0.667015] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
- [ 0.667024] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
- [ 0.667036] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
- [ 0.667113] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
- [ 0.667462] xlog_status: enable:0, panic:1, dump:2
- [ 0.667663] OF: no ranges; cannot translate
- [ 0.667679] OF: no ranges; cannot translate
- [ 0.668337] OF: no ranges; cannot translate
- [ 0.668350] OF: no ranges; cannot translate
- [ 0.668503] OF: no ranges; cannot translate
- [ 0.668515] OF: no ranges; cannot translate
- [ 0.668646] OF: no ranges; cannot translate
- [ 0.668657] OF: no ranges; cannot translate
- [ 0.668839] mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00000100
- [ 0.674273] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
- [ 0.674470] mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
- [ 0.674604] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
- [ 0.674738] mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
- [ 0.677548] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 0.677829] mdss_panel_parse_panel_config_dt: BL: panel=mipi_mot_cmd_smd_QHD_546_g, manufacture_id(0xDA)= 0xB3 controller_ver(0xDB)= 0x55 controller_drv_ver(0XDC)= 0x28, full=0x00000000002855B3
- [ 0.677846] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_mot_smd_546_QHD_g_cmd_v0 panel_name:qcom,mdss_dsi_mot_smd_546_QHD_g_cmd_v0
- [ 0.677864] mdss_dsi_panel_init: Panel Name = mipi_mot_cmd_smd_QHD_546_g
- [ 0.677956] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_mot_smd_546_QHD_g_cmd_v0" (ffffffc0f98a3350)
- [ 0.677978] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 0.677989] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
- [ 0.677997] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
- [ 0.678012] mdss_dsi_parse_topology_config: cfg_node name config0 lm_split:0x0 pp_split:no
- [ 0.678097] mdss_dsi_parse_panel_features: partial_update_enabled=1
- [ 0.678110] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 0.678120] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 0.678129] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
- [ 0.678212] mdss_panel_parse_param_prop: HBM feature enabled with 2 dt cmds
- [ 0.678220] mdss_panel_parse_param_prop: HBM type = 0
- [ 0.678238] mdss_panel_parse_param_prop: ACL feature enabled with 2 dt cmds
- [ 0.678909] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
- [ 0.678963] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
- [ 0.678988] mdss_dsi_retrieve_ctrl_resources+0x164/0x1d4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
- [ 0.678999] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff800184a000 ctrl_size=400 phy_base=ffffff800184c400 phy_size=588
- [ 0.679182] dsi_panel_device_register: Continuous splash enabled
- [ 0.679809] mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
- [ 0.681037] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
- [ 0.681255] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
- [ 0.681265] mdss_dsi_pinctrl_init: failed to get pinctrl
- [ 0.681271] mdss_dsi_ctrl_probe: failed to get pin resources
- [ 0.681481] mdss_dsi_find_panel_of_node: controller 1: is not present in 0:qcom,mdss_dsi_mot_smd_546_QHD_g_cmd_v0
- [ 0.681496] mdss_dsi_panel_init: Panel Name = mipi_mot_dba_panel
- [ 0.681572] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_mot_dba_panel" (ffffffc0f98a3350)
- [ 0.681585] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-on-command
- [ 0.681594] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 0.681603] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
- [ 0.681654] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-off-command
- [ 0.681668] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 0.681677] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 0.681686] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
- [ 0.681699] mdss_dsi_parse_panel_features: ESD check disabled by bootloader panel config, bare_board = 0, esd_enable = 0
- [ 0.681737] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
- [ 0.681745] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
- [ 0.681905] mdss_dsi_parse_ctrl_params:3954 Unable to read qcom,display-id, data=0000000000000000,len=20
- [ 0.681916] mdss_dsi_parse_gpio_params:3988, TE gpio not specified
- [ 0.681924] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
- [ 0.681931] mdss_dsi_parse_gpio_params:3999, reset gpio not specified
- [ 0.681957] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
- [ 0.681977] mdss_dsi_retrieve_ctrl_resources+0x164/0x1d4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
- [ 0.681987] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8001850000 ctrl_size=400 phy_base=ffffff8001852400 phy_size=558
- [ 0.682011] dsi_panel_device_register: Continuous splash disabled
- [ 0.682507] mdss_register_panel: adding framebuffer device 996000.qcom,mdss_dsi_ctrl1
- [ 0.682757] panel_debug_register_base: debugfs_create_file: data_type fail
- [ 0.683055] mdss_dsi_ctrl_probe: Dsi Ctrl->1 initialized, DSI rev:0x10040001, PHY rev:0x2
- [ 0.684565] mdss_dsi_status_init: DSI status check interval:8000
- [ 0.686125] hdmi_tx_init_resource: 'core_physical': start = 0xffffff8001856000, len=0x50c
- [ 0.686141] hdmi_tx_init_resource: 'qfprom_physical': start = 0xffffff8001858000, len=0x6158
- [ 0.686237] hdmi_tx_init_resource: 'hdcp_physical': start = 0xffffff8001872000, len=0xfff
- [ 0.687260] mdss_register_panel: adding framebuffer device 9a0000.qcom,hdmi_tx
- [ 0.690598] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
- [ 0.691189] mdss_fb_register: FrameBuffer[0] 1440x2560 registered successfully!
- [ 0.692362] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
- [ 0.692833] mdss_fb_register: FrameBuffer[1] 854x480 registered successfully!
- [ 0.692955] mdss_mdp_splash_parse_dt: splash mem child node is not present
- [ 0.692985] mdss_fb_probe: fb2: split_mode:0 left:0 right:0
- [ 0.693081] mdss_fb_register: FrameBuffer[2] 640x480 registered successfully!
- [ 0.693482] input: HDMI CEC User or Deck Control as /devices/virtual/input/input1
- [ 0.699034] mdss_mdp_kcal_store_fb0_ctl panel name mipi_mot_cmd_smd_QHD_546_g
- [ 0.699070] mdss_mdp_kcal_store_fb0_ctl panel found...
- [ 0.699120] kcal_ctrl_init: registered
- [ 0.706681] smd_channel_probe_now: allocation table not initialized
- [ 0.717102] In memshare_probe, Memshare probe success
- [ 0.723098] l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
- [ 0.724199] msm_rpm_log_probe: OK
- [ 0.727991] subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
- [ 0.729013] subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
- [ 0.732148] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
- [ 0.734364] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0xa (ok)
- [ 0.734831] ANX7816 slimport_chip_detect : CHIPID: ANX7816
- [ 0.735396] input: qbt1000_key_input as /devices/virtual/input/input2
- [ 0.736339] mmi_unit_info (SMEM) for modem: version = 0x03, device = 'sheridan', radio = 0x0, radio_str = 'ROW', system_rev = 0x83b0, system_serial = 0xf8f514af00000000, machine = '', barcode = 'ZY223LT4KZ', baseband = '', carrier = 'reteu', pu_reason = 0x00004000
- [ 0.736458] mmi_storage_info :UFS: 32GB SAMSUNG KLUBG4G1CE-B0B1 FV=0800
- [ 0.738111] smd_channel_probe_now: allocation table not initialized
- [ 0.738555] uart_tx_gpio is not available
- [ 0.738576] uart_rx_gpio is not available
- [ 0.738583] uart_cts_gpio is not available
- [ 0.738590] uart_rfr_gpio is not available
- [ 0.739068] mod_display_register_impl: Registered impl for type: 2
- [ 0.739133] i2c-core: driver [anx7816] using legacy suspend method
- [ 0.739143] i2c-core: driver [anx7816] using legacy resume method
- [ 0.739423] sps: BAM device 0x0000000007544000 is not registered yet.
- [ 0.739585] sps:BAM 0x0000000007544000 is registered.
- [ 0.741174] 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 19, base_baud = 460800) is a MSM HS UART
- [ 0.743152] uart_tx_gpio is not available
- [ 0.743176] uart_rx_gpio is not available
- [ 0.743183] uart_cts_gpio is not available
- [ 0.743189] uart_rfr_gpio is not available
- [ 0.744779] sps: BAM device 0x0000000007584000 is not registered yet.
- [ 0.744957] sps:BAM 0x0000000007584000 is registered.
- [ 0.746203] 75b3000.uart: ttyHS5 at MMIO 0x75b3000 (irq = 419, base_baud = 460800) is a MSM HS UART
- [ 0.747666] msm_serial_hs module loaded
- [ 0.771713] brd: module loaded
- [ 0.773221] loop: module loaded
- [ 0.773467] zram: Added device: zram0
- [ 0.774616] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
- [ 0.774669] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
- [ 0.774681] QSEECOM: qseecom_probe: no-clock-support=0x1
- [ 0.774691] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
- [ 0.775168] scm_call failed: func id 0x70000006, ret: -1, syscall returns: 0x0, 0x0, 0x0
- [ 0.775178] QSEECOM: qseecom_probe: qseecom.whitelist_support = 0
- [ 0.778743] alsa-to-h2w soc:alsa_to_h2w: alsa_to_h2w_probe success
- [ 0.780135] motosh 5-0043: probe begun
- [ 0.780908] motosh 5-0043: motosh_gpio_init: wake_response currently unused
- [ 0.781693] input: sensorprocessor as /devices/virtual/input/input3
- [ 0.781753] motosh 5-0043: probe finished
- [ 0.782405] fusb302 7-0022: fusb30x_probe
- [ 0.783551] fusb_InitializeGPIO - Warning: Could not get GPIO for Debug GPIO! Error code: -2
- [ 0.789481] fusb302 7-0022: FUSB fusb30x_probe - FUSB30X Driver loaded successfully!
- [ 0.791796] hd3ss460 soc:hd3ss460: USB supply not found, deferring probe
- [ 0.792202] usb3813 7-002d: USB supply not found, deferring probe
- [ 0.793946] greybus: Registered control protocol v0.1.
- [ 0.793975] greybus: Registered svc protocol v0.1.
- [ 0.793983] greybus: Registered firmware protocol v0.1.
- [ 0.793995] greybus: Registered gb_audio_mgmt protocol v0.3.
- [ 0.794002] greybus: Registered gb_mods_audio protocol v0.3.
- [ 0.794012] greybus: Registered battery protocol v0.1.
- [ 0.794021] greybus: Registered lights protocol v0.1.
- [ 0.794031] greybus: Registered hid protocol v0.1.
- [ 0.794061] greybus: Registered raw protocol v0.1.
- [ 0.799440] muc soc:muc: probed finished
- [ 0.801027] _mods_create_dl_device for soc:muc_svc@0 [0]
- [ 0.801134] muc_attach_state: val = 0 intr = 0 b+fault = 0
- [ 0.802207] _mods_create_dl_device for mods_ap [1]
- [ 0.802381] muc_svc soc:muc_svc@0: VERSION: 0.1
- [ 0.807101] muc_attach_state: val = 0 intr = 0 b+fault = 0
- [ 0.807223] apba_firmware_callback: no firmware available
- [ 0.809850] mods_uart soc:mod_uart: mods_uart_probe: Using ttyHS5
- [ 0.810300] greybus: Registered vendor-moto protocol v0.3.
- [ 0.810312] greybus: Registered ptp protocol v0.3.
- [ 0.811870] greybus: Registered camera_ext protocol v1.1.
- [ 0.811943] greybus: Registered display protocol v0.2.
- [ 0.811954] greybus: Registered usb-ext protocol v0.1.
- [ 0.811963] greybus: Registered sensors-ext protocol v0.2.
- [ 0.812060] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- [ 0.812069] i2c-core: driver [tabla-i2c-core] using legacy resume method
- [ 0.812131] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
- [ 0.812139] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
- [ 0.812193] i2c-core: driver [tasha-i2c-core] using legacy suspend method
- [ 0.812200] i2c-core: driver [tasha-i2c-core] using legacy resume method
- [ 0.814501] Loading pn544 driver
- [ 0.815404] nfc: failed to get nfc_clk
- [ 0.815698] 7-0028 supply vdd not found, using dummy regulator
- [ 0.817400] qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
- [ 0.817428] qce 660000.qcedev: CE device = 0x0
- [ 0.817645] sps:BAM 0x0000000000644000 is registered.
- [ 0.817872] sps:BAM 0x0000000000644000 (va:0xffffff80033c0000) enabled: ver:0x27, number of pipes:16
- [ 0.817894] sps:BAM 0x0000000000644000 pipe 3 sharing violation
- [ 0.817904] sps:Failed to connect BAM 0xffffffc075fda800 pipe 3
- [ 0.817919] QCE50: qce_sps_init_ep_conn: sps_connect() fail pipe_handle=0xffffffc075fdac00, rc = -1
- [ 0.817945] sps:De-init client in connected state: 0x1535053
- [ 0.818059] qce: probe of 660000.qcedev failed with error -1
- [ 0.820524] qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
- [ 0.820558] qcrypto 660000.qcrypto: CE device = 0x0
- [ 0.820757] sps:BAM 0x0000000000644000 is registered.
- [ 0.820936] sps:BAM 0x0000000000644000 (va:0xffffff8003480000) enabled: ver:0x27, number of pipes:16
- [ 0.821219] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 159
- [ 0.826625] qcrypto 660000.qcrypto: qcrypto-ecb-aes
- [ 0.826787] qcrypto 660000.qcrypto: qcrypto-cbc-aes
- [ 0.826884] qcrypto 660000.qcrypto: qcrypto-ctr-aes
- [ 0.826989] qcrypto 660000.qcrypto: qcrypto-ecb-des
- [ 0.827066] qcrypto 660000.qcrypto: qcrypto-cbc-des
- [ 0.827158] qcrypto 660000.qcrypto: qcrypto-ecb-3des
- [ 0.827267] qcrypto 660000.qcrypto: qcrypto-cbc-3des
- [ 0.827377] qcrypto 660000.qcrypto: qcrypto-xts-aes
- [ 0.827454] qcrypto 660000.qcrypto: qcrypto-sha1
- [ 0.827530] qcrypto 660000.qcrypto: qcrypto-sha256
- [ 0.827605] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
- [ 0.827680] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
- [ 0.827763] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
- [ 0.827840] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
- [ 0.827919] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
- [ 0.828023] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
- [ 0.828109] qcrypto 660000.qcrypto: qcrypto-hmac-sha1
- [ 0.828189] qcrypto 660000.qcrypto: qcrypto-hmac-sha256
- [ 0.828264] qcrypto 660000.qcrypto: qcrypto-aes-ccm
- [ 0.828340] qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
- [ 0.831388] ICE IRQ = 31
- [ 0.831663] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
- [ 0.831717] ICE IRQ = 32
- [ 0.836875] qcom_ice_get_pdevice: found ice device ffffffc075ff4a00
- [ 0.836908] qcom_ice_get_pdevice: matching platform device ffffffc0f8263400
- [ 0.837327] scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
- [ 0.837963] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
- [ 0.837975] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
- [ 0.838940] scsi host0: ufshcd
- [ 0.842603] qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8002060000
- [ 0.848414] SCSI Media Changer driver v0.25
- [ 0.852756] sps:BAM 0x0000000007584000 (va:0xffffff80022c0000) enabled: ver:0x19, number of pipes:24
- [ 0.854536] arizona spi9.0: Mandatory DT gpio wlf,ldoena missing/malformed: -2
- [ 0.854695] LDO1: at 1200 mV
- [ 0.865970] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
- [ 0.894214] arizona spi9.0: WM5110 revision G
- [ 0.896092] arizona spi9.0: Unbalanced pm_runtime_enable!
- [ 0.898303] MICVDD: 900 <--> 3300 mV at 2500 mV
- [ 0.898465] MICVDD: supplied by pm8994_s4
- [ 0.898629] Adding alias for supply MICVDD,(null) -> MICVDD,spi9.0
- [ 0.899393] Adding alias for supply MICVDD,(null) -> MICVDD,spi9.0
- [ 0.899415] Adding alias for supply DBVDD2,(null) -> DBVDD2,spi9.0
- [ 0.899425] Adding alias for supply DBVDD3,(null) -> DBVDD3,spi9.0
- [ 0.899435] Adding alias for supply CPVDD,(null) -> CPVDD,spi9.0
- [ 0.899445] Adding alias for supply SPKVDDL,(null) -> SPKVDDL,spi9.0
- [ 0.899454] Adding alias for supply SPKVDDR,(null) -> SPKVDDR,spi9.0
- [ 0.903796] spi_qsd 75ba000.spi: init_resources: unable to get core_clk
- [ 0.904580] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
- [ 0.906092] tun: Universal TUN/TAP device driver, 1.6
- [ 0.906121] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.906481] PPP generic driver version 2.4.2
- [ 0.906629] PPP BSD Compression module registered
- [ 0.906645] PPP Deflate Compression module registered
- [ 0.906761] PPP MPPE Compression module registered
- [ 0.906781] NET: Registered protocol family 24
- [ 0.906836] Context not found
- [ 0.983017] PCI host bridge /soc/qcom,pcie@00608000 ranges:
- [ 0.983063] No bus range found for /soc/qcom,pcie@00608000, using [bus 00-ff]
- [ 0.983093] IO 0x0d200000..0x0d2fffff -> 0x0d200000
- [ 0.983110] MEM 0x0d300000..0x0dffffff -> 0x0d300000
- [ 0.993325] pci-msm 608000.qcom,pcie: PCI host bridge to bus 0001:00
- [ 0.993347] pci_bus 0001:00: root bus resource [bus 00-ff]
- [ 0.993411] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0xd200000-0xd2fffff])
- [ 0.993424] pci_bus 0001:00: root bus resource [mem 0x0d300000-0x0dffffff]
- [ 0.993494] pci 0001:00:00.0: [17cb:0104] type 01 class 0x060400
- [ 0.993602] msm_pcie_oper_conf: Read of RC1 0:0x00 + 0x0014[4] is all FFs
- [ 0.993619] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
- [ 0.993681] pci 0001:00:00.0: IOMMU is currently not supported for PCI
- [ 0.993783] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
- [ 0.993826] pci 0001:00:00.0: of_irq_parse_pci() failed with rc=-19
- [ 0.994093] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 0.994336] pci 0001:01:00.0: [168c:003e] type 00 class 0x028000
- [ 0.994502] msm_pcie_oper_conf: Read of RC1 1:0x00 + 0x0014[4] is all FFs
- [ 0.994517] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
- [ 0.994685] pci 0001:01:00.0: IOMMU is currently not supported for PCI
- [ 0.994873] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
- [ 0.995500] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
- [ 0.995614] msm_pcie_oper_conf: Read of RC1 0:0x00 + 0x0028[4] is all FFs
- [ 0.995652] pci 0001:00:00.0: BAR 8: assigned [mem 0x0d400000-0x0d5fffff]
- [ 0.995664] pci 0001:00:00.0: BAR 0: assigned [mem 0x0d300000-0x0d300fff 64bit]
- [ 0.995767] pci 0001:01:00.0: BAR 0: assigned [mem 0x0d400000-0x0d5fffff 64bit]
- [ 0.996043] pci 0001:00:00.0: PCI bridge to [bus 01]
- [ 0.996082] pci 0001:00:00.0: bridge window [mem 0x0d400000-0x0d5fffff]
- [ 0.998121] cnss soc:qcom,cnss: for AR6320 segments only will be dumped.
- [ 0.999380] cnss_probe: MAC1 from bootparams=68:C4:4D:9E:18:C2
- [ 0.999418] cnss_probe: MAC2 from boot params=68:C4:4D:9E:18:C3
- [ 1.028731] cnss: Platform driver probed successfully.
- [ 1.032381] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
- [ 1.032461] usbcore: registered new interface driver pegasus
- [ 1.032526] usbcore: registered new interface driver asix
- [ 1.032560] usbcore: registered new interface driver ax88179_178a
- [ 1.032607] usbcore: registered new interface driver cdc_ether
- [ 1.032649] usbcore: registered new interface driver net1080
- [ 1.032684] usbcore: registered new interface driver cdc_subset
- [ 1.032719] usbcore: registered new interface driver zaurus
- [ 1.032760] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
- [ 1.033113] usbcore: registered new interface driver cdc_ncm
- [ 1.034092] msm_sharedmem: sharedmem_register_qmi: qmi init successful
- [ 1.036902] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
- [ 1.046542] msm-dwc3 6a00000.ssusb: unable to get dbm device
- [ 1.046723] 7600000.hsusb supply USB3_GDSC not found, using dummy regulator
- [ 1.047600] msm-dwc3 7600000.hsusb: unable to read platform data tx fifo size
- [ 1.055001] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.055038] ehci-pci: EHCI PCI platform driver
- [ 1.055120] usbcore: registered new interface driver usb-storage
- [ 1.055142] usbcore: registered new interface driver ums-alauda
- [ 1.055160] usbcore: registered new interface driver ums-cypress
- [ 1.055179] usbcore: registered new interface driver ums-datafab
- [ 1.055198] usbcore: registered new interface driver ums-freecom
- [ 1.055216] usbcore: registered new interface driver ums-isd200
- [ 1.055234] usbcore: registered new interface driver ums-jumpshot
- [ 1.055253] usbcore: registered new interface driver ums-karma
- [ 1.055272] usbcore: registered new interface driver ums-sddr09
- [ 1.055293] usbcore: registered new interface driver ums-sddr55
- [ 1.055314] usbcore: registered new interface driver ums-usbat
- [ 1.055400] usbcore: registered new interface driver usbserial
- [ 1.055422] usbcore: registered new interface driver usb_ehset_test
- [ 1.056150] gbridge_init: gbridge_init successs.
- [ 1.056466] mousedev: PS/2 mouse device common for all mice
- [ 1.056885] usbcore: registered new interface driver xpad
- [ 1.059361] synaptics_dsx_dt_parse_modifiers: processing modifier config_modifier-aod[0]
- [ 1.059639] synaptics_dsx_i2c 8-0020: no valid patch sets found
- [ 1.059652] synaptics_dsx_dt_parse_modifiers: processing modifier config_modifier-fps[5]
- [ 1.059661] synaptics_dsx_dt_parse_modifiers: using fingerprint sensor detection
- [ 1.059672] synaptics_dsx_dt_parse_modifier: using touch clip area in fps-active
- [ 1.059845] synaptics_dsx_of_init: using gpio config
- [ 1.060153] 8-0020 supply vdd_quirk not found, using dummy regulator
- [ 1.075066] msm-dwc3 7600000.hsusb: DWC3 in low power mode
- [ 1.080824] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x14 (ok)
- [ 1.093495] synaptics_dsx_i2c 8-0020: synaptics_rmi4_cap_button_map: cap_button_map is NULL in board file
- [ 1.095860] synaptics_dsx_i2c 8-0020: F51 ctrl[0]=00
- [ 1.095870] synaptics_dsx_i2c 8-0020: F51 ctrl[4]=14
- [ 1.099725] input: synaptics_dsx_i2c as /devices/soc/75b6000.i2c/i2c-8/8-0020/input/input4
- [ 1.099882] synaptics_rmi4_query_device: Product: s3508sga, firmware id: 246de6, config id: 16071302
- [ 1.100843] synaptics_dsx_sensor_state: state change UNKNOWN -> STANDBY
- [ 1.100857] synaptics_dsx_sysfs_touchscreen: assigned minor 128
- [ 1.100977] synaptics_dsx_i2c 8-0020: Failed to register fps_notifier: -19
- [ 1.100988] ------------[ cut here ]------------
- [ 1.101013] WARNING: CPU: 3 PID: 1 at ../../../../../../kernel/motorola/msm8996/kernel/power/qos.c:626 pm_qos_add_request+0xf8/0x2bc()
- [ 1.101022] IRQ-308 not set for request with affinity flag
- [ 1.101034] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 3.18.31-lineageOS #7
- [ 1.101041] Hardware name: Sheridan (DT)
- [ 1.101050] Call trace:
- [ 1.101064] [<ffffffc000088b04>] dump_backtrace+0x0/0x23c
- [ 1.101071] [<ffffffc000088d54>] show_stack+0x14/0x1c
- [ 1.101089] [<ffffffc000ed68a0>] dump_stack+0x88/0xac
- [ 1.101098] [<ffffffc0000a0e70>] warn_slowpath_common+0x88/0xb0
- [ 1.101105] [<ffffffc0000a0f14>] warn_slowpath_fmt+0x50/0x58
- [ 1.101113] [<ffffffc0000e7d00>] pm_qos_add_request+0xf8/0x2bc
- [ 1.101129] [<ffffffc000765e8c>] synaptics_rmi4_probe+0xf44/0x10c8
- [ 1.101143] [<ffffffc0007893b8>] i2c_device_probe+0xb8/0xec
- [ 1.101155] [<ffffffc00055ecd8>] driver_probe_device+0xd4/0x224
- [ 1.101162] [<ffffffc00055eed8>] __driver_attach+0x64/0x90
- [ 1.101174] [<ffffffc00055d518>] bus_for_each_dev+0x74/0x90
- [ 1.101180] [<ffffffc00055efc0>] driver_attach+0x20/0x28
- [ 1.101188] [<ffffffc00055dd74>] bus_add_driver+0xf0/0x1c0
- [ 1.101195] [<ffffffc00055f9b4>] driver_register+0x94/0xe0
- [ 1.101204] [<ffffffc00078a280>] i2c_register_driver+0x4c/0xac
- [ 1.101218] [<ffffffc0016fc40c>] synaptics_rmi4_init+0x1c/0x24
- [ 1.101232] [<ffffffc0016bbb1c>] do_one_initcall+0x188/0x1a4
- [ 1.101240] [<ffffffc0016bbcf8>] kernel_init_freeable+0x1c0/0x25c
- [ 1.101249] [<ffffffc000ed0c2c>] kernel_init+0x14/0xd4
- [ 1.101293] ---[ end trace 2e68a5bea3c213a9 ]---
- [ 1.103906] input: hbtp_vm as /devices/virtual/input/input5
- [ 1.105127] input: fpc1020 as /devices/virtual/input/input6
- [ 1.105247] fpc1020 spi12.0: fpc1020_probe: ok
- [ 1.106438] input: qwerty as /devices/virtual/input/input7
- [ 1.106742] hb_init hb done
- [ 1.107131] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
- [ 1.107167] Current shipmode info1 is 0x88d = 0x0
- [ 1.107196] Write shipmode info1 to 0x88d with 0x0
- [ 1.107391] i2c /dev entries driver
- [ 1.130866] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
- [ 1.131528] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
- [ 1.132740] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
- [ 1.134096] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
- [ 1.135853] scsi 0:0:0:0: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
- [ 1.138018] scsi 0:0:0:1: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
- [ 1.138465] scsi 0:0:0:2: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
- [ 1.138918] scsi 0:0:0:3: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0800 PQ: 0 ANSI: 6
- [ 1.140854] sd 0:0:0:1: [sdb] 16384-byte physical blocks
- [ 1.141307] sd 0:0:0:2: [sdc] 16384-byte physical blocks
- [ 1.141909] sd 0:0:0:3: [sdd] 16384-byte physical blocks
- [ 1.142549] sd 0:0:0:0: [sda] 16384-byte physical blocks
- [ 1.143990] sd 0:0:0:2: [sdc] 16384-byte physical blocks
- [ 1.144616] sd 0:0:0:3: [sdd] 16384-byte physical blocks
- [ 1.144642] sd 0:0:0:1: [sdb] 16384-byte physical blocks
- [ 1.144986] vmem: Up and running with 4 banks of memory from [io size 0x3f07c2d9c9 pref disabled]
- [ 1.147332] sdc: sdc1 sdc2 sdc3 sdc4 sdc5 sdc6 sdc7 sdc8 sdc9
- [ 1.147684] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 sdb15 sdb16 sdb17 sdb18 sdb19 sdb20 sdb21 sdb22 sdb23 sdb24
- [ 1.147728] sdd: sdd1 sdd2
- [ 1.148828] sd 0:0:0:3: [sdd] 16384-byte physical blocks
- [ 1.150160] sd 0:0:0:0: [sda] 16384-byte physical blocks
- [ 1.150314] sd 0:0:0:2: [sdc] 16384-byte physical blocks
- [ 1.152253] sd 0:0:0:1: [sdb] 16384-byte physical blocks
- [ 1.153410] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20
- [ 1.156163] sd 0:0:0:0: [sda] 16384-byte physical blocks
- [ 1.170335] msm_eeprom_platform_probe failed 1718
- [ 1.171273] msm_eeprom_platform_probe failed 1718
- [ 1.186646] MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000
- [ 1.186716] MSM-CPP cpp_init_hardware:881 stream_cnt:0
- [ 1.201564] __msm_jpeg_init:1537] Jpeg Device id 0
- [ 1.202731] __msm_jpeg_init:1537] Jpeg Device id 2__msm_jpeg_init:1537] Jpeg Device id 3
- [ 1.208566] msm_fd_hw_set_dt_parms_by_name: Error property does not exist
- [ 1.306722] msm_fd aa4000.qcom,fd: Face detection halt timeout
- [ 1.308129] usbcore: registered new interface driver uvcvideo
- [ 1.308147] USB Video Class driver (1.1.1)
- [ 1.308157] gspca_main: v2.14.0 registered
- [ 1.309683] FG: fg_power_get_property: ESR Bad: -22 mOhm
- [ 1.309992] FG: fg_power_get_property: ESR Bad: -22 mOhm
- [ 1.310104] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
- [ 1.312286] qpnp-smbcharger qpnp-smbcharger-17: USB supply not found, deferring probe
- [ 1.316456] unable to find DT imem DLOAD mode node
- [ 1.318419] unable to find DT imem EDLOAD mode node
- [ 1.324798] lm75 7-0048: hwmon1: sensor 'tmp108'
- [ 1.325879] thermal thermal_zone1: failed to read out thermal zone 1
- [ 1.359208] device-mapper: uevent: version 1.0.3
- [ 1.359474] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
- [ 1.359620] device-mapper: req-crypt: dm-req-crypt successfully initalized.
- [ 1.359635] Bluetooth: ffffffc0f98a3d30
- [ 1.359643] Bluetooth: ffffffc0f98a3d10
- [ 1.361156] bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property
- [ 1.361307] bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
- [ 1.361318] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
- [ 1.361326] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
- [ 1.362009] sdhci: Secure Digital Host Controller Interface driver
- [ 1.362023] sdhci: Copyright(c) Pierre Ossman
- [ 1.362032] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 1.363164] qcom_ice_get_pdevice: found ice device ffffffc075ff4e00
- [ 1.363182] qcom_ice_get_pdevice: matching platform device ffffffc0f8263800
- [ 1.363845] sdhci_msm 74a4900.sdhci: sdhci_msm_probe: ICE device is not enabled
- [ 1.378245] sdhci_msm 74a4900.sdhci: No vmmc regulator found
- [ 1.378280] sdhci_msm 74a4900.sdhci: No vqmmc regulator found
- [ 1.378760] random: nonblocking pool is initialized
- [ 1.378900] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using 64-bit ADMA in legacy mode
- [ 1.417715] hidraw: raw HID events driver (C) Jiri Kosina
- [ 1.418245] usbcore: registered new interface driver usbhid
- [ 1.418263] usbhid: USB HID core driver
- [ 1.419161] ashmem: initialized
- [ 1.421235] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
- [ 1.435426] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
- [ 1.437307] arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
- [ 1.437365] arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
- [ 1.440473] m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
- [ 1.444735] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
- [ 1.444864] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
- [ 1.444974] devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
- [ 1.445084] devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
- [ 1.446144] devfreq soc:qcom,m4m: Couldn't update frequency transition information.
- [ 1.449575] usbcore: registered new interface driver snd-usb-audio
- [ 1.451370] cs35l34 7-0041: Wrong cirrus,boost-manager DT value 0
- [ 1.451387] cs35l34 7-0041: Wrong cirrus,sdout-datacfg DT value 0
- [ 1.452002] cs35l34 7-0041: Cirrus Logic CS35l34 (35a34), Revision: 00
- [ 1.455046] qpnp_pin_of_gpio_xlate: no such PMIC gpio 15 in device topology
- [ 1.455063] audio-ref-clk soc:audio_ext_clk: Looking up qcom,audio-ref-clk-gpio property in node /soc/audio_ext_clk failed -22
- [ 1.455077] audio-ref-clk: probe of soc:audio_ext_clk failed with error -22
- [ 1.458858] 7-0023 supply hs_det_vdd not found, using dummy regulator
- [ 1.459141] fsa8500 7-0023: Device ID is 0x1
- [ 1.462135] fsa8500_initialize success
- [ 1.462321] fsa8500 probed successfully
- [ 1.469808] msm-dai-q6-mi2s soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-mi2s-sec: msm_dai_q6_mi2s_platform_data_validation: Unable to get pinctrl handle
- [ 1.469832] msm-dai-q6-mi2s: probe of soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-mi2s-sec failed with error -22
- [ 1.472367] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
- [ 1.472672] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
- [ 1.472689] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 1.472843] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
- [ 1.472858] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 1.473010] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
- [ 1.473026] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 1.473182] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
- [ 1.473198] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 1.473224] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
- [ 1.473407] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
- [ 1.473422] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 1.473578] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
- [ 1.473593] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 1.473744] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
- [ 1.473760] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 1.473908] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
- [ 1.473923] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 1.473948] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
- [ 1.474096] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
- [ 1.474110] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 1.474259] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
- [ 1.474274] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 1.474431] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
- [ 1.474445] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 1.474593] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
- [ 1.474608] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 1.474633] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
- [ 1.474787] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
- [ 1.474802] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 1.474955] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
- [ 1.474970] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 1.475122] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
- [ 1.475137] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 1.475286] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
- [ 1.475302] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- [ 1.477898] msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
- [ 1.487228] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
- [ 1.488654] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
- [ 1.490522] GACT probability NOT on
- [ 1.490541] Mirror/redirect action on
- [ 1.490555] u32 classifier
- [ 1.490560] Actions configured
- [ 1.490578] Netfilter messages via NETLINK v0.30.
- [ 1.490588] nfnl_acct: registering with nfnetlink.
- [ 1.490613] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 1.490788] ctnetlink v0.93: registering with nfnetlink.
- [ 1.491161] xt_time: kernel timezone is -0000
- [ 1.491308] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.491389] arp_tables: (C) 2002 David S. Miller
- [ 1.491418] TCP: cubic registered
- [ 1.491431] Initializing XFRM netlink socket
- [ 1.491646] NET: Registered protocol family 10
- [ 1.492095] mip6: Mobile IPv6
- [ 1.492114] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.492182] sit: IPv6 over IPv4 tunneling driver
- [ 1.492408] NET: Registered protocol family 17
- [ 1.492425] NET: Registered protocol family 15
- [ 1.492454] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
- [ 1.492472] Bridge firewalling registered
- [ 1.492479] Ebtables v2.0 registered
- [ 1.492604] Bluetooth: ffffffc0f98a3ce0
- [ 1.492614] Bluetooth: ffffffc0f98a3cd0Bluetooth: ffffffc0f98a3d10Bluetooth: ffffffc0f98a3cf0Bluetooth: ffffffc0f98a3cf0Bluetooth: ffffffc0f98a3cd0Bluetooth: ffffffc0f98a3d40Bluetooth: ffffffc0f98a3d20
- [ 1.492692] l2tp_core: L2TP core driver, V2.0
- [ 1.492704] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- [ 1.492712] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
- [ 1.492728] l2tp_netlink: L2TP netlink interface
- [ 1.492746] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
- [ 1.492760] l2tp_debugfs: L2TP debugfs support
- [ 1.492767] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
- [ 1.493665] NET: Registered protocol family 27
- [ 1.497494] subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
- [ 1.499255] subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
- [ 1.500849] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
- [ 1.501505] pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
- [ 1.502592] hd3ss460 soc:hd3ss460: USB supply not found, deferring probe
- [ 1.502815] usb3813 7-002d: USB supply not found, deferring probe
- [ 1.505102] sps:BAM 0x0000000006b04000 is registered.
- [ 1.506998] smbchg_parse_peripherals: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
- [ 1.507081] smb_parse_dt: length=2
- [ 1.507089] smb_parse_dt: num stepchg entries=2
- [ 1.507097] smb_parse_dt: Step 0 max_mv = 4200 mV, max_ma = 2500 mA, taper_ma = 1800 mA
- [ 1.507106] smb_parse_dt: Step 1 max_mv = 4400 mV, max_ma = 1800 mA, taper_ma = 1500 mA
- [ 1.507116] smb_parse_dt: num chg-thermal-mitigation levels = 5
- [ 1.507124] smb_parse_dt: num charge mitigation entries = 5
- [ 1.507131] smb_parse_dt: num thermal-mitigation levels = 7
- [ 1.507138] smb_parse_dt: num mitigation entries = 7
- [ 1.507546] smb_parse_dt: length=5
- [ 1.507556] smb_parse_dt: num parallel charge entries=5
- [ 1.507625] smbcharger_charger_otg: no parameters
- [ 1.507709] smbcharger_external_otg: no parameters
- [ 1.507737] smbcharger_external_otg: supplied by pmi8994_boost_5v
- [ 1.507884] smbchg_hw_init: Couldn't set 5V USBC Voltage rc=-22
- [ 1.508411] ------------[ cut here ]------------
- [ 1.508426] WARNING: CPU: 3 PID: 266 at ../../../../../../kernel/motorola/msm8996/kernel/irq/manage.c:448 __enable_irq+0x40/0x88()
- [ 1.508433] Unbalanced enable for IRQ 138
- [ 1.508440] CPU: 3 PID: 266 Comm: kworker/3:2 Tainted: G W 3.18.31-lineageOS #7
- [ 1.508446] Hardware name: Sheridan (DT)
- [ 1.508456] Workqueue: events status_change_work
- [ 1.508464] Call trace:
- [ 1.508473] [<ffffffc000088b04>] dump_backtrace+0x0/0x23c
- [ 1.508479] [<ffffffc000088d54>] show_stack+0x14/0x1c
- [ 1.508489] [<ffffffc000ed68a0>] dump_stack+0x88/0xac
- [ 1.508495] [<ffffffc0000a0e70>] warn_slowpath_common+0x88/0xb0
- [ 1.508501] [<ffffffc0000a0f14>] warn_slowpath_fmt+0x50/0x58
- [ 1.508507] [<ffffffc0000efdc8>] __enable_irq+0x40/0x88
- [ 1.508513] [<ffffffc0000efe78>] enable_irq+0x68/0x78
- [ 1.508519] [<ffffffc0008639c8>] status_change_work+0x158/0xb0c
- [ 1.508528] [<ffffffc0000b59fc>] process_one_work+0x25c/0x438
- [ 1.508534] [<ffffffc0000b5efc>] worker_thread+0x324/0x440
- [ 1.508541] [<ffffffc0000baa60>] kthread+0xe0/0xe8
- [ 1.508547] ---[ end trace 2e68a5bea3c213aa ]---
- [ 1.534612] smbchg_request_irqs: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
- [ 1.535540] smbchg_probe: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=0
- [ 1.536317] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
- [ 1.538297] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
- [ 1.540901] usb3813 7-002d: Done probing usb3813
- [ 1.541672] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
- [ 1.543701] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
- [ 1.544897] Loading compiled-in X.509 certificates
- [ 1.547068] mod_display_register_impl: Registered impl for type: 1
- [ 1.547747] mot_dba_panel_parse_dt: failed to find mot_dba,sel-dsi-val
- [ 1.548818] fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
- [ 1.548957] adsprpc: channel link type: 0
- [ 1.552309] FG: update_esr_value: ESR: update esr from 0x4120391f391f3019 to 0x58cd4a6761c34a67
- [ 1.555848] msm-dwc3 6a00000.ssusb: DWC3 in low power mode
- [ 1.558585] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
- [ 1.560344] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
- [ 1.560840] 7-005a supply vibrator_vdd not found, using dummy regulator
- [ 1.561080] drv2605: No default calibration data
- [ 1.562774] drv260x: drv260x_init success
- [ 1.563770] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
- [ 1.563846] utags (utags_probe): Done [config]
- [ 1.563916] utags (utags_dt_init): backup storage path not provided
- [ 1.564088] utags (utags_probe): Done [hw]
- [ 1.565898] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
- [ 1.566404] RNDIS_IPA module is loaded.
- [ 1.566914] file system registered
- [ 1.566951] mbim_init: initialize 1 instances
- [ 1.567056] mbim_init: Initialized 1 ports
- [ 1.567470] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
- [ 1.568073] rndis_qc_init: initialize rndis QC instance
- [ 1.568223] Number of LUNs=8
- [ 1.568235] Mass Storage Function, version: 2009/09/11
- [ 1.568241] LUN: removable file: (no medium)
- [ 1.568255] Number of LUNs=1
- [ 1.568281] LUN: removable file: (no medium)
- [ 1.568287] Number of LUNs=1
- [ 1.568765] android_usb gadget: android_usb ready
- [ 1.569572] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
- [ 1.570796] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input8
- [ 1.570832] input input8: gpio-keys report volume_up [0x73] type 0x1 state Off
- [ 1.570979] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
- [ 1.572991] stmvl53l0_get_dt_data gpio_array[0] = 1020
- [ 1.573055] stmvl53l0_get_dt_data gpio_array[1] = 119
- [ 1.573196] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
- [ 1.573392] i2c-msm-v2 75b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:1) mode:FIFO slv_addr:0x29 MSTR_STS:0x081343c8 OPER:0x000004c0
- [ 1.573414] stmvl53l0_checkmoduleid: i2c_transfer err:-107, addr:0x29, reg:0xc0
- [ 1.574126] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
- [ 1.575711] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
- [ 1.596987] stmvl53l0_checkmoduleid: STM VL53L0 Found 2291
- [ 1.597171] input: Rear proximity sensor as /devices/virtual/input/input9
- [ 1.597390] i2c-core: driver [stmvl53l0] using legacy resume method
- [ 1.598363] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-01-01 22:20:43 UTC (80443)
- [ 1.598584] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
- [ 1.600877] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
- [ 1.601277] smb_psy_notifier_call: PSY Added/Removed run HB!
- [ 1.601307] smbchg_fg_ready: SMBCHG: FG Status: Unknown Battery
- [ 1.601315] smbchg_fg_ready: SMBCHG: FG Status: Not Ready!
- [ 1.602227] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
- [ 1.604369] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
- [ 1.605925] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
- [ 1.608327] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
- [ 1.608441] lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
- [ 1.608685] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
- [ 1.608821] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
- [ 1.608993] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
- [ 1.609156] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
- [ 1.609293] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
- [ 1.609435] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
- [ 1.609571] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
- [ 1.611015] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
- [ 1.612232] parse_cpu_levels: idx 1 545
- [ 1.612244] parse_cpu_levels: idx 2 6022
- [ 1.612250] parse_cpu_levels: idx 2 11499
- [ 1.612473] parse_cpu_levels: idx 1 545
- [ 1.612479] parse_cpu_levels: idx 2 6022
- [ 1.612484] parse_cpu_levels: idx 2 11499
- [ 1.613527] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
- [ 1.614658] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
- [ 1.615074] qcom,qpnp-flash-led qpnp-flash-led-23: Unable to acquire pinctrl
- [ 1.616367] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
- [ 1.616569] rmnet_ipa started initialization
- [ 1.616579] IPA SSR support = True
- [ 1.616584] IPA ipa-loaduC = True
- [ 1.616589] IPA SG support = True
- [ 1.617438] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
- [ 1.618583] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
- [ 1.618599] ipa ipa2_uc_state_check:301 uC is not loaded
- [ 1.619122] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
- [ 1.619465] rmnet_ipa completed initialization
- [ 1.620290] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
- [ 1.621187] mmc0: new high speed SDHC card at address 59b4
- [ 1.621427] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0x3) latency=70 (0xffffffc0338de000)
- [ 1.621444] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xc) latency=70 (0xffffffc0338de008)
- [ 1.621548] mmcblk0: mmc0:59b4 SMI 7.50 GiB
- [ 1.621813] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
- [ 1.624985] qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
- [ 1.625879] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
- [ 1.626088] LDO1: disabling
- [ 1.626132] wlan_en_vreg: disabling
- [ 1.626138] rome_vreg: disabling
- [ 1.626143] gdsc_mmagic_bimc: disabling
- [ 1.626183] kryo1-retention: disabling
- [ 1.626189] kryo0-retention: disabling
- [ 1.626194] gfx_mem_acc_corner: disabling
- [ 1.626199] apcc_l3_mem_acc_corner: disabling
- [ 1.626204] apc1_perfcl_mem_acc_corner: disabling
- [ 1.626209] apc0_pwrcl_mem_acc_corner: disabling
- [ 1.626220] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
- [ 1.626663] clock_late_init: Removing enables held for handed-off clocks
- [ 1.627355] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
- [ 1.628154] mmcblk0: p1 p2
- [ 1.629211] msm8996-asoc-snd soc:sound: populate_snd_card_dailinks(): right cs35l34 hardware present
- [ 1.630651] msm8996-asoc-snd soc:sound: ASoC: platform (null) not registered
- [ 1.630952] ALSA device list:
- [ 1.630958] No soundcards found.
- [ 1.631823] Freeing unused kernel memory: 516K (ffffffc0016bb000 - ffffffc00173c000)
- [ 1.631846] Freeing alternatives memory: 84K (ffffffc00173c000 - ffffffc001751000)
- [ 1.693429] mot_dba_get_default_resolution: invalid data
- [ 1.700095] bcl_peripheral:bcl_poll_ibat_low Invalid ibat state 1
- [ 1.873490] smbchg_force_apsd: Start APSD Rerun!
- [ 1.873644] src_detect_handler: chip->usb_present = 0 usb_present = 0
- [ 2.104200] synaptics_dsx_i2c 8-0020: fwu_scan_pdt: BL version = 6
- [ 2.117331] drv2605 7-005a: Status: Autocalibration success
- [ 2.120244] drv2605 7-005a: driver found: drv2605.
- [ 2.121654] drv2605 7-005a: probe work succeeded
- [ 2.603383] smbchg_fg_ready: SMBCHG: FG Status: Unknown Battery
- [ 2.603398] smbchg_fg_ready: SMBCHG: FG Status: Not Ready!
- [ 2.603430] bcl_peripheral:bcl_poll_vbat_high Vbat reached high clear trip. vbat:4297800
- [ 2.737028] src_detect_handler: chip->usb_present = 0 usb_present = 1
- [ 2.737184] smbchg_fg_ready: SMBCHG: FG Status: Unknown Battery
- [ 2.737193] smbchg_fg_ready: SMBCHG: FG Status: Not Ready!
- [ 2.860050] msm-dwc3 6a00000.ssusb: DWC3 exited from low power mode
- [ 2.860068] ------------[ cut here ]------------
- [ 2.860084] WARNING: CPU: 0 PID: 44 at ../../../../../../kernel/motorola/msm8996/kernel/irq/manage.c:448 __enable_irq+0x40/0x88()
- [ 2.860094] Unbalanced enable for IRQ 724
- [ 2.860104] CPU: 0 PID: 44 Comm: kworker/0:1 Tainted: G W 3.18.31-lineageOS #7
- [ 2.860112] Hardware name: Sheridan (DT)
- [ 2.860124] Workqueue: events dwc3_otg_sm_work
- [ 2.860133] Call trace:
- [ 2.860143] [<ffffffc000088b04>] dump_backtrace+0x0/0x23c
- [ 2.860152] [<ffffffc000088d54>] show_stack+0x14/0x1c
- [ 2.860163] [<ffffffc000ed68a0>] dump_stack+0x88/0xac
- [ 2.860171] [<ffffffc0000a0e70>] warn_slowpath_common+0x88/0xb0
- [ 2.860178] [<ffffffc0000a0f14>] warn_slowpath_fmt+0x50/0x58
- [ 2.860186] [<ffffffc0000efdc8>] __enable_irq+0x40/0x88
- [ 2.860194] [<ffffffc0000efe78>] enable_irq+0x68/0x78
- [ 2.860201] [<ffffffc0006d7388>] dwc3_msm_resume+0x3d8/0x418
- [ 2.860209] [<ffffffc0006d7400>] dwc3_msm_runtime_resume+0x38/0x44
- [ 2.860221] [<ffffffc0005648dc>] pm_generic_runtime_resume+0x28/0x38
- [ 2.860229] [<ffffffc0005660f4>] __rpm_callback+0x40/0x74
- [ 2.860236] [<ffffffc00056618c>] rpm_callback+0x64/0x84
- [ 2.860243] [<ffffffc00056690c>] rpm_resume+0x394/0x4d0
- [ 2.860251] [<ffffffc00056752c>] __pm_runtime_resume+0x4c/0x70
- [ 2.860258] [<ffffffc0006d6270>] dwc3_otg_sm_work+0x348/0x6c8
- [ 2.860268] [<ffffffc0000b59fc>] process_one_work+0x25c/0x438
- [ 2.860276] [<ffffffc0000b5efc>] worker_thread+0x324/0x440
- [ 2.860285] [<ffffffc0000baa60>] kthread+0xe0/0xe8
- [ 2.860292] ---[ end trace 2e68a5bea3c213ac ]---
- [ 3.740047] smbchg_fg_ready: SMBCHG: FG Status: Unknown Battery
- [ 3.740062] smbchg_fg_ready: SMBCHG: FG Status: Not Ready!
- [ 3.965981] EXT2-fs (sda20): warning: mounting unchecked fs, running e2fsck is recommended
- [ 4.113339] enable_store: android_usb: already disabled
- [ 4.118355] dwc3 6a00000.dwc3: request ffffffc033b1b900 was not queued to ep0out
- [ 4.119293] rndis_function_bind_config: rndis_function_bind_config MAC: 00:00:00:00:00:00
- [ 4.119339] android_usb gadget: using random self ethernet address
- [ 4.119358] android_usb gadget: using random host ethernet address
- [ 4.119709] rndis0: MAC 2e:41:af:8a:70:9d
- [ 4.119718] rndis0: HOST MAC f6:04:74:07:a1:70
- [ 4.153492] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
- [ 4.457194] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 4.461687] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
- [ 4.568575] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 4.743377] smbchg_fg_ready: SMBCHG: FG Status: Unknown Battery
- [ 4.743392] smbchg_fg_ready: SMBCHG: FG Status: Not Ready!
- [ 4.809809] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
- [ 4.886937] FG: fg_get_mmi_battid: Battsn unused
- [ 4.886951] qcom,qpnp-fg qpnp-fg-18: Default Serial Number SNN5972
- [ 4.886960] qcom,qpnp-fg qpnp-fg-18: Battery Match Found using default qcom,gv30-lg
- [ 4.891226] FG: fg_batt_profile_init: Battery profiles same, using default
- [ 4.894432] FG: populate_system_data: cutoff_voltage = 2999860, nom_cap_uah = 2681000 p1p2 = 43, p2p3 = 9
- [ 4.896022] FG: fg_batt_profile_init: Battery SOC: 100, V: 4293493uV
- [ 4.900906] android_work: android_work: did not send uevent (0 0 (null))
- [ 4.991323] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 5.219981] preinit: (5.21) Welcome to Sailfish OS 3.0.2.8 (Oulanka)
- [ 5.231813] preinit: (5.23) is_erase_needed: No : 0
- [ 5.254332] preinit: (5.25) get_bootstate: USER : 0
- [ 5.254909] preinit: (5.25) BOOTSTATE = USER
- [ 5.256600] preinit: (5.25) Booting to default.target
- [ 5.278835] persistent_ram: persistent_ram_annotation_merge: discarded 63
- [ 5.278864] pstore: Created annotate-ramoops
- [ 5.285030] systemd[1]: systemd 225 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
- [ 5.285366] systemd[1]: Detected architecture arm64.
- [ 5.286345] systemd[1]: Set hostname to <Sailfish>.
- [ 5.286901] systemd[1]: Initializing machine ID from random generator.
- [ 5.304894] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 5.367441] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
- [ 5.380750] systemd[1]: sys-fs-pstore.mount: Cannot create mount unit for API file system /sys/fs/pstore. Refusing.
- [ 5.393133] systemd[1]: Configuration file /lib/systemd/system/droid-late-start.service is marked executable. Please remove executable permission bits. Proceeding anyway.
- [ 5.399577] systemd[1]: Configuration file /lib/systemd/system/droid-hal-init.service is marked executable. Please remove executable permission bits. Proceeding anyway.
- [ 5.416571] systemd[1]: sys-fs-pstore.mount: Cannot add dependency job, ignoring: Unit sys-fs-pstore.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-pstore.mount' for details.
- [ 5.420486] systemd[1]: Reached target Login Prompts.
- [ 5.420883] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 5.421119] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 5.421313] systemd[1]: Reached target Swap.
- [ 5.421861] systemd[1]: Created slice Root Slice.
- [ 5.422289] systemd[1]: Created slice User and Session Slice.
- [ 5.422530] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 5.422764] systemd[1]: Listening on Journal Socket.
- [ 5.423029] systemd[1]: Listening on udev Kernel Socket.
- [ 5.423219] systemd[1]: Listening on udev Control Socket.
- [ 5.423670] systemd[1]: Created slice System Slice.
- [ 5.423902] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
- [ 5.424965] systemd[1]: Mounting Temporary Directory...
- [ 5.426306] systemd[1]: Mounting FFS mount...
- [ 5.429193] systemd[1]: Mounting Droid mount for /dev/cpuctl...
- [ 5.429544] systemd[1]: Reached target Slices.
- [ 5.432012] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 5.434640] systemd[1]: Mounting Debug File System...
- [ 5.436935] systemd[1]: Mounting Droid mount for /dev/bfqio...
- [ 5.438487] systemd[1]: Mounting Droid mount for /dev/cpuset...
- [ 5.440134] systemd[1]: Mounting Droid mount for /dev/stune...
- [ 5.444799] systemd[1]: Starting Setup Virtual Console...
- [ 5.446658] cgroup: new mount options do not match the existing superblock, will be ignored
- [ 5.447927] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 5.448845] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 5.451477] systemd[1]: Starting Journal Service...
- [ 5.456579] systemd[1]: Mounted Debug File System.
- [ 5.456969] systemd[1]: Mounted Temporary Directory.
- [ 5.457279] systemd[1]: Mounted FFS mount.
- [ 5.457574] systemd[1]: Mounted Droid mount for /dev/cpuset.
- [ 5.457877] systemd[1]: Mounted Droid mount for /dev/bfqio.
- [ 5.458426] android_work: android_work: did not send uevent (0 0 (null))
- [ 5.460941] systemd[1]: dev-cpuctl.mount: Mount process exited, code=exited status=32
- [ 5.461484] systemd[1]: Failed to mount Droid mount for /dev/cpuctl.
- [ 5.461885] systemd[1]: dev-cpuctl.mount: Unit entered failed state.
- [ 5.462823] systemd[1]: dev-stune.mount: Mount process exited, code=exited status=32
- [ 5.463308] systemd[1]: Failed to mount Droid mount for /dev/stune.
- [ 5.463790] systemd[1]: dev-stune.mount: Unit entered failed state.
- [ 5.464625] systemd[1]: Started Setup Virtual Console.
- [ 5.465653] systemd[1]: Started Create list of required static device nodes for the current kernel.
- [ 5.506444] systemd[1]: Started Remount Root and Kernel File Systems.
- [ 5.548409] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 5.625579] systemd[1]: Starting Rebuild Dynamic Linker Cache...
- [ 5.629992] systemd[1]: Starting Rebuild Hardware Database...
- [ 5.632678] systemd[1]: Starting Clean RPM db region files at each reboot...
- [ 5.635955] systemd[1]: Starting Load/Save Random Seed...
- [ 5.639111] systemd[1]: Starting Create System Users...
- [ 5.644840] systemd[1]: Started Journal Service.
- [ 5.727843] systemd-journald[806]: Received request to flush runtime journal from PID 1
- [ 5.746742] smbchg_fg_ready: SMBCHG: FG Status: GV30-LG-2630mah
- [ 5.746764] smbchg_fg_ready: SMBCHG: FG Status: Lets Charge!
- [ 5.790215] android_usb gadget: high-speed config #1: 66bf0c8.android_usb
- [ 5.790362] msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
- [ 5.790524] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
- [ 5.804647] smbchg_heartbeat_work: EB Input 0 mA, PMI Input 500 mA, USBC CL 500 mA, DC 900 mA
- [ 5.804670] smbchg_heartbeat_work: Step State = FIRST, BSW Mode OFF, EB State DISCONN
- [ 5.804682] smbchg_check_temp_state: Battery Temp State = Good
- [ 5.843435] android_work: android_work: sent uevent USB_STATE=CONFIGURED
- [ 7.113670] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:65
- [ 7.113690] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:65
- [ 7.113699] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:65
- [ 7.113707] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:65
- [ 7.973454] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 7.989390] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.011083] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.027191] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.028538] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.034141] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.036977] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.039433] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.040485] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.044100] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.047037] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.053044] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.064006] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.091472] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.095683] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.108648] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.109932] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.114850] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.124229] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.125511] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.127549] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.136387] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.146479] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.146637] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.148596] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.151166] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.161214] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.164211] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.164342] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.168054] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.170601] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.199961] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.204895] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.209330] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.209752] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.211264] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.214015] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.225600] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.229039] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.230661] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.231039] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.240480] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.253126] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.260590] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.268376] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.278681] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.279224] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.280440] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.290463] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.290753] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.297386] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.299996] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.303668] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.305638] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.313337] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.324956] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.340925] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.344373] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.346951] ufshcd 624000.ufshc: ufshcd_ioctl: User buffer is NULL!
- [ 8.531355] EXT4-fs (sda8): VFS: Can't find ext4 filesystem
- [ 8.549779] EXT4-fs (sda3): Unrecognized mount option "def" or missing value
- [ 8.550702] EXT4-fs (sdc4): mounted filesystem without journal. Opts: (null)
- [ 8.558427] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 8.609896] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
- [ 8.616111] EXT4-fs (sda15): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 8.626852] EXT4-fs (sda16): mounted filesystem with ordered data mode. Opts: (null)
- [ 9.013727] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 960000. Temp:63
- [ 9.013749] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 960000. Temp:63
- [ 9.013760] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1555200. Temp:63
- [ 9.013769] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1555200. Temp:63
- [ 9.113773] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 556800. Temp:60
- [ 9.113801] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 556800. Temp:60
- [ 9.113816] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1248000. Temp:60
- [ 9.113827] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1248000. Temp:60
- [ 9.714159] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 960000. Temp:48
- [ 9.714191] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 960000. Temp:48
- [ 9.714206] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1555200. Temp:48
- [ 9.714220] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1555200. Temp:48
- [ 11.113817] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:48
- [ 11.113845] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:48
- [ 11.113860] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:48
- [ 11.113874] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:48
- [ 11.129904] dwc3 6a00000.dwc3: request ffffffc033b1b900 was not queued to ep0out
- [ 11.132973] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
- [ 11.143476] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
- [ 11.158058] droid-hal-init: init first stage started!
- [ 11.158887] droid-hal-init: init second stage started!
- [ 11.158942] droid-hal-init: Failed to initialize property area
- [ 11.253774] rndis_function_bind_config: rndis_function_bind_config MAC: 16:F3:C4:E3:70:4F
- [ 11.253834] android_usb gadget: using random self ethernet address
- [ 11.253846] android_usb gadget: using previous host ethernet address
- [ 11.254283] rndis0: MAC a2:bb:ba:84:9c:f4
- [ 11.254297] rndis0: HOST MAC f6:04:74:07:a1:70
- [ 11.267756] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
- [ 11.313712] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:48
- [ 11.313735] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:48
- [ 11.313747] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:48
- [ 11.313757] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:48
- [ 11.360494] dwc3_gadget_suspend_interrupt(): state:0. Ignore SUSPEND.
- [ 11.469802] msm-dwc3 6a00000.ssusb: Avail curr from USB = 0
- [ 11.470140] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
- [ 11.561930] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 11.566469] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
- [ 11.671832] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 11.793831] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
- [ 11.884407] android_work: android_work: did not send uevent (0 0 (null))
- [ 11.974124] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 12.195947] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
- [ 12.287427] android_work: android_work: did not send uevent (0 0 (null))
- [ 12.372912] capability: warning: `ofonod' uses 32-bit capabilities (legacy support in use)
- [ 12.377549] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 12.596156] android_usb gadget: high-speed config #1: 66bf0c8.android_usb
- [ 12.596306] msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
- [ 12.596419] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
- [ 12.650088] android_work: android_work: sent uevent USB_STATE=CONFIGURED
- [ 12.713652] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:60
- [ 12.713671] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:60
- [ 12.713680] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:60
- [ 12.713688] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:60
- [ 13.288891] droid-hal-init: init first stage started!
- [ 13.289776] droid-hal-init: init second stage started!
- [ 13.289823] droid-hal-init: Failed to initialize property area
- [ 13.913710] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 960000. Temp:60
- [ 13.913732] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 960000. Temp:60
- [ 13.913743] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1555200. Temp:60
- [ 13.913752] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1555200. Temp:60
- [ 14.713738] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:48
- [ 14.713763] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:48
- [ 14.713776] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:48
- [ 14.713786] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:48
- [ 14.813698] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:46
- [ 14.813710] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:46
- [ 14.813719] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:46
- [ 14.813728] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:46
- [ 15.669321] droid-hal-init: init first stage started!
- [ 15.670203] droid-hal-init: init second stage started!
- [ 15.670252] droid-hal-init: Failed to initialize property area
- [ 42.843563] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
- [ 42.866731] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
- [ 42.868691] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
- [ 42.869051] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
- [ 44.013685] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:63
- [ 44.013706] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:63
- [ 44.013714] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:63
- [ 44.013722] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:63
- [ 44.585072] QDBusConnection[3619]: unhandled level 3 translation fault (11) at 0x00000018, esr 0x92000007
- [ 44.585102] pgd = ffffffc0ef44b000
- [ 44.585115] [00000018] *pgd=000000016f496003, *pud=000000016f496003, *pmd=00000001720e4003, *pte=0000000000000000
- [ 44.585166] CPU: 0 PID: 3619 Comm: QDBusConnection Tainted: G W 3.18.31-lineageOS #7
- [ 44.585182] Hardware name: Sheridan (DT)
- [ 44.585195] task: ffffffc075284980 ti: ffffffc0752b4000 task.ti: ffffffc0752b4000
- [ 44.585211] PC is at 0xf1bbfe02
- [ 44.585223] LR is at 0xf1bc0187
- [ 44.585235] pc : [<00000000f1bbfe02>] lr : [<00000000f1bc0187>] pstate: 80000030
- [ 44.585248] sp : 00000000ef95c948
- [ 44.585259] x12: 00000000ef95c964
- [ 44.585275] x11: 0000000000efffff x10: 00000000ffffffff
- [ 44.585296] x9 : 0000000000000000 x8 : 0000000000000018
- [ 44.585315] x7 : 0000000000000001 x6 : 00000000f1dc43b0
- [ 44.585335] x5 : 00000000ef600468 x4 : 00000000f1d6e280
- [ 44.585353] x3 : 00000000000effff x2 : 0000000000efffff
- [ 44.585371] x1 : 00000000000061a8 x0 : 00000000ef600468
- [ 44.613714] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:48
- [ 44.613735] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:48
- [ 44.613745] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:48
- [ 44.613755] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:48
- [ 65.978316] smbchg_heartbeat_work: EB Input 0 mA, PMI Input 500 mA, USBC CL 500 mA, DC 900 mA
- [ 65.978338] smbchg_heartbeat_work: Step State = FIRST, BSW Mode OFF, EB State DISCONN
- [ 76.005085] smbchg_heartbeat_work: EB Input 0 mA, PMI Input 500 mA, USBC CL 500 mA, DC 900 mA
- [ 76.005108] smbchg_heartbeat_work: Step State = FIRST, BSW Mode OFF, EB State DISCONN
- [ 86.031621] smbchg_heartbeat_work: EB Input 0 mA, PMI Input 500 mA, USBC CL 500 mA, DC 900 mA
- [ 86.031641] smbchg_heartbeat_work: Step State = SECOND, BSW Mode OFF, EB State DISCONN
- [ 119.745917] FG: update_esr_value: ESR: update esr from 0x58cd4a6761c34a67 to 0x4120391f391f3019
- [ 146.191654] smbchg_heartbeat_work: EB Input 0 mA, PMI Input 500 mA, USBC CL 500 mA, DC 900 mA
- [ 146.191675] smbchg_heartbeat_work: Step State = SECOND, BSW Mode OFF, EB State DISCONN
- [ 156.246626] smbchg_heartbeat_work: EB Input 0 mA, PMI Input 500 mA, USBC CL 500 mA, DC 900 mA
- [ 156.246647] smbchg_heartbeat_work: Step State = SECOND, BSW Mode OFF, EB State DISCONN
- [ 166.271694] smbchg_heartbeat_work: EB Input 0 mA, PMI Input 500 mA, USBC CL 500 mA, DC 900 mA
- [ 166.271716] smbchg_heartbeat_work: Step State = TAPER, BSW Mode OFF, EB State DISCONN
- [ 226.404957] smbchg_heartbeat_work: EB Input 0 mA, PMI Input 500 mA, USBC CL 500 mA, DC 900 mA
- [ 226.404979] smbchg_heartbeat_work: Step State = TAPER, BSW Mode OFF, EB State DISCONN
- [ 286.564950] smbchg_heartbeat_work: EB Input 0 mA, PMI Input 500 mA, USBC CL 500 mA, DC 900 mA
- [ 286.564972] smbchg_heartbeat_work: Step State = TAPER, BSW Mode OFF, EB State DISCONN
- [ 296.591721] smbchg_heartbeat_work: EB Input 0 mA, PMI Input 500 mA, USBC CL 500 mA, DC 900 mA
- [ 296.591744] smbchg_heartbeat_work: Step State = TAPER, BSW Mode OFF, EB State DISCONN
- [ 306.618504] smbchg_heartbeat_work: EB Input 0 mA, PMI Input 500 mA, USBC CL 500 mA, DC 900 mA
- [ 306.618525] smbchg_heartbeat_work: Step State = FULL, BSW Mode OFF, EB State DISCONN
- [ 366.778291] smbchg_heartbeat_work: EB Input 0 mA, PMI Input 500 mA, USBC CL 500 mA, DC 900 mA
- [ 366.778312] smbchg_heartbeat_work: Step State = FULL, BSW Mode OFF, EB State DISCONN
- sh-3.2#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement