Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] microcode: microcode updated early to revision 0x2a, date = 2018-01-18
- [ 0.000000] Linux version 4.15.12-1-ARCH (builduser@heftig-2806) (gcc version 7.3.1 20180312 (GCC)) #1 SMP PREEMPT Wed Mar 21 15:14:56 UTC 2018
- [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=887cc9d4-9612-4443-a8b6-e763acd8a099 rw quiet
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
- [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
- [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000968d9fff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000968da000-0x00000000971d9fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000971da000-0x000000009c8eefff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000009c8ef000-0x000000009cddefff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000009cddf000-0x000000009cfbefff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009fffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001deffffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] random: fast init done
- [ 0.000000] SMBIOS 2.7 present.
- [ 0.000000] DMI: Acer Aspire VN7-571G /Aspire VN7-571G , BIOS V1.16 08/06/2015
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x1df000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-E7FFF write-protect
- [ 0.000000] E8000-EFFFF write-combining
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
- [ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back
- [ 0.000000] 2 base 009D000000 mask 7FFF000000 uncachable
- [ 0.000000] 3 base 009E000000 mask 7FFE000000 uncachable
- [ 0.000000] 4 base 00FFA00000 mask 7FFFE00000 write-protect
- [ 0.000000] 5 base 00FFC00000 mask 7FFFC00000 write-protect
- [ 0.000000] 6 base 0100000000 mask 7F00000000 write-back
- [ 0.000000] 7 base 01DF000000 mask 7FFF000000 uncachable
- [ 0.000000] 8 base 01E0000000 mask 7FE0000000 uncachable
- [ 0.000000] 9 disabled
- [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
- [ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ (ptrval)]
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] BRK [0x8263a000, 0x8263afff] PGTABLE
- [ 0.000000] BRK [0x8263b000, 0x8263bfff] PGTABLE
- [ 0.000000] BRK [0x8263c000, 0x8263cfff] PGTABLE
- [ 0.000000] BRK [0x8263d000, 0x8263dfff] PGTABLE
- [ 0.000000] BRK [0x8263e000, 0x8263efff] PGTABLE
- [ 0.000000] BRK [0x8263f000, 0x8263ffff] PGTABLE
- [ 0.000000] BRK [0x82640000, 0x82640fff] PGTABLE
- [ 0.000000] BRK [0x82641000, 0x82641fff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x36e97000-0x37742fff]
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
- [ 0.000000] ACPI: XSDT 0x000000009CFC9188 0000CC (v01 ACRSYS ACRPRDCT 00000001 01000013)
- [ 0.000000] ACPI: FACP 0x000000009CFF2000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: DSDT 0x000000009CFD9000 0120BA (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
- [ 0.000000] ACPI: FACS 0x000000009CFB8000 000040
- [ 0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: UEFI 0x000000009CFFC000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
- [ 0.000000] ACPI: SSDT 0x000000009CFF8000 0031AA (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
- [ 0.000000] ACPI: MSDM 0x000000009CFF7000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: ASF! 0x000000009CFF6000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: ASPT 0x000000009CFF5000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: BOOT 0x000000009CFF4000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: DBGP 0x000000009CFF3000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: HPET 0x000000009CFF1000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: LPIT 0x000000009CFF0000 000094 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
- [ 0.000000] ACPI: APIC 0x000000009CFEF000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: MCFG 0x000000009CFEE000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: WDAT 0x000000009CFED000 000224 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: SSDT 0x000000009CFD7000 001440 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000)
- [ 0.000000] ACPI: SSDT 0x000000009CFEC000 000539 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
- [ 0.000000] ACPI: SSDT 0x000000009CFD6000 000B74 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
- [ 0.000000] ACPI: SSDT 0x000000009CFD0000 005BEB (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
- [ 0.000000] ACPI: SSDT 0x000000009CFCC000 00359E (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
- [ 0.000000] ACPI: DMAR 0x000000009CFCB000 0000B0 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
- [ 0.000000] ACPI: FPDT 0x000000009CFCA000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001deffffff]
- [ 0.000000] NODE_DATA(0) allocated [mem 0x1deffb000-0x1deffdfff]
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- [ 0.000000] Normal [mem 0x0000000100000000-0x00000001deffffff]
- [ 0.000000] Device empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
- [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000968d9fff]
- [ 0.000000] node 0: [mem 0x00000000971da000-0x000000009c8eefff]
- [ 0.000000] node 0: [mem 0x000000009cfff000-0x000000009cffffff]
- [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001deffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001deffffff]
- [ 0.000000] On node 0 totalpages: 1552269
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 9920 pages used for memmap
- [ 0.000000] DMA32 zone: 634864 pages, LIFO batch:31
- [ 0.000000] Normal zone: 14272 pages used for memmap
- [ 0.000000] Normal zone: 913408 pages, LIFO batch:31
- [ 0.000000] Reserved but unavailable: 99 pages
- [ 0.000000] Reserving Intel graphics memory at 0x000000009e000000-0x000000009fffffff
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x968da000-0x971d9fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x9c8ef000-0x9cddefff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x9cddf000-0x9cfbefff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9fffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
- [ 0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
- [ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] percpu: Embedded 45 pages/cpu @ (ptrval) s147456 r8192 d28672 u524288
- [ 0.000000] pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1527992
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=887cc9d4-9612-4443-a8b6-e763acd8a099 rw quiet
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 6012256K/6209076K available (10252K kernel code, 1250K rwdata, 3224K rodata, 1432K init, 632K bss, 196820K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Kernel/User page tables isolation: enabled
- [ 0.000000] ftrace: allocating 31424 entries in 123 pages
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
- [ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 20736, nr_irqs: 728, preallocated irqs: 16
- [ 0.000000] Offload RCU callbacks from CPUs: .
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] ACPI: Core revision 20170831
- [ 0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded
- [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
- [ 0.000000] hpet clockevent registered
- [ 0.000000] APIC: Switch to symmetric I/O mode setup
- [ 0.000000] DMAR: Host address width 39
- [ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
- [ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
- [ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
- [ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
- [ 0.000000] DMAR: RMRR base: 0x0000009cd84000 end: 0x0000009cda3fff
- [ 0.000000] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
- [ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
- [ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
- [ 0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
- [ 0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
- [ 0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode
- [ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
- [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.005000] tsc: Fast TSC calibration using PIT
- [ 0.006000] tsc: Detected 2194.862 MHz processor
- [ 0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.72 BogoMIPS (lpj=2194862)
- [ 0.006000] pid_max: default: 32768 minimum: 301
- [ 0.006000] Security Framework initialized
- [ 0.006000] Yama: becoming mindful.
- [ 0.008043] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.008657] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.008690] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.008711] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.008915] CPU: Physical Processor ID: 0
- [ 0.008916] CPU: Processor Core ID: 0
- [ 0.008921] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- [ 0.008922] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.008927] mce: CPU supports 7 MCE banks
- [ 0.008935] CPU0: Thermal monitoring enabled (TM1)
- [ 0.008947] process: using mwait in idle threads
- [ 0.008950] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
- [ 0.008951] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
- [ 0.008952] Spectre V2 : Mitigation: Full generic retpoline
- [ 0.008953] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
- [ 0.008953] Spectre V2 : Enabling Restricted Speculation for firmware calls
- [ 0.009053] Freeing SMP alternatives memory: 24K
- [ 0.010063] TSC deadline timer enabled
- [ 0.010065] smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4)
- [ 0.014007] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
- [ 0.014052] ... version: 3
- [ 0.014053] ... bit width: 48
- [ 0.014053] ... generic registers: 4
- [ 0.014055] ... value mask: 0000ffffffffffff
- [ 0.014055] ... max period: 00007fffffffffff
- [ 0.014056] ... fixed-purpose events: 3
- [ 0.014057] ... event mask: 000000070000000f
- [ 0.016003] Hierarchical SRCU implementation.
- [ 0.022161] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
- [ 0.024002] smp: Bringing up secondary CPUs ...
- [ 0.033012] x86: Booting SMP configuration:
- [ 0.033013] .... node #0, CPUs: #1 #2 #3
- [ 0.054488] smp: Brought up 1 node, 4 CPUs
- [ 0.054488] smpboot: Max logical packages: 1
- [ 0.054488] smpboot: Total of 4 processors activated (17558.89 BogoMIPS)
- [ 0.055245] devtmpfs: initialized
- [ 0.055245] x86/mm: Memory block size: 128MB
- [ 0.055597] PM: Registering ACPI NVS region [mem 0x9cddf000-0x9cfbefff] (1966080 bytes)
- [ 0.056065] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
- [ 0.056065] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.056067] pinctrl core: initialized pinctrl subsystem
- [ 0.056159] RTC time: 2:51:33, date: 03/28/18
- [ 0.056264] NET: Registered protocol family 16
- [ 0.056421] cpuidle: using governor ladder
- [ 0.056421] cpuidle: using governor menu
- [ 0.056421] Simple Boot Flag at 0x44 set to 0x1
- [ 0.056421] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.056421] ACPI: bus type PCI registered
- [ 0.056421] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.056421] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.058014] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.058021] PCI: Using configuration type 1 for base access
- [ 0.058224] mtrr: your CPUs had inconsistent variable MTRR settings
- [ 0.058225] mtrr: probably your BIOS does not setup all CPUs.
- [ 0.058226] mtrr: corrected configuration.
- [ 0.060039] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.060039] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.060072] ACPI: Added _OSI(Module Device)
- [ 0.060074] ACPI: Added _OSI(Processor Device)
- [ 0.060074] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.060075] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.060700] ACPI: Executed 19 blocks of module-level executable AML code
- [ 0.068743] ACPI Error: No handler for Region [RAM_] (000000005c256b5d) [EmbeddedControl] (20170831/evregion-166)
- [ 0.068753] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20170831/exfldio-299)
- [ 0.068761] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._REG, AE_NOT_EXIST (20170831/psparse-550)
- [ 0.068951] ACPI Error: No handler for Region [RAM_] (000000005c256b5d) [EmbeddedControl] (20170831/evregion-166)
- [ 0.068956] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20170831/exfldio-299)
- [ 0.068962] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._REG, AE_NOT_EXIST (20170831/psparse-550)
- [ 0.073099] ACPI: Dynamic OEM Table Load:
- [ 0.073107] ACPI: SSDT 0xFFFFA02B56FFE000 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20130117)
- [ 0.073813] ACPI: Dynamic OEM Table Load:
- [ 0.073820] ACPI: SSDT 0xFFFFA02B56EA9800 0005AA (v02 PmRef ApIst 00003000 INTL 20130117)
- [ 0.074576] ACPI: Dynamic OEM Table Load:
- [ 0.074582] ACPI: SSDT 0xFFFFA02B56802C00 000119 (v02 PmRef ApCst 00003000 INTL 20130117)
- [ 0.076530] ACPI: EC: EC started
- [ 0.076531] ACPI: EC: interrupt blocked
- [ 0.077656] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
- [ 0.077658] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2f, EC_CMD/EC_SC=0x66, EC_DATA=0x62
- [ 0.077660] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
- [ 0.077661] ACPI: Interpreter enabled
- [ 0.077706] ACPI: (supports S0 S3 S4 S5)
- [ 0.077707] ACPI: Using IOAPIC for interrupt routing
- [ 0.077747] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.078646] ACPI: Enabled 8 GPEs in block 00 to 7F
- [ 0.079740] ACPI: Power Resource [PG00] (on)
- [ 0.080345] ACPI: Power Resource [PG01] (on)
- [ 0.080937] ACPI: Power Resource [PG02] (on)
- [ 0.097879] ACPI: Power Resource [PC05] (on)
- [ 0.103970] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
- [ 0.103977] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.105435] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
- [ 0.105437] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
- [ 0.106685] PCI host bridge to bus 0000:00
- [ 0.106688] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- [ 0.106690] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 0.106692] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 0.106693] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
- [ 0.106695] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfe113fff window]
- [ 0.106697] pci_bus 0000:00: root bus resource [bus 00-fe]
- [ 0.106706] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
- [ 0.107092] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
- [ 0.107105] pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc2ffffff 64bit]
- [ 0.107111] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.107116] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
- [ 0.107521] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
- [ 0.107532] pci 0000:00:03.0: reg 0x10: [mem 0xc4310000-0xc4313fff 64bit]
- [ 0.107929] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
- [ 0.107949] pci 0000:00:14.0: reg 0x10: [mem 0xc4300000-0xc430ffff 64bit]
- [ 0.108010] pci 0000:00:14.0: PME# supported from D3hot D3cold
- [ 0.108372] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
- [ 0.108395] pci 0000:00:16.0: reg 0x10: [mem 0xc4319000-0xc431901f 64bit]
- [ 0.108465] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.108821] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
- [ 0.108841] pci 0000:00:1b.0: reg 0x10: [mem 0xc4314000-0xc4317fff 64bit]
- [ 0.108900] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.109295] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
- [ 0.109365] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.109795] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
- [ 0.109866] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 0.110302] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
- [ 0.110372] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 0.110799] pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
- [ 0.110870] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- [ 0.111310] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
- [ 0.111848] pci 0000:00:1d.0: reg 0x10: [mem 0xc431d000-0xc431d3ff]
- [ 0.114306] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.114668] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
- [ 0.115138] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
- [ 0.115154] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
- [ 0.115161] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
- [ 0.115167] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
- [ 0.115174] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
- [ 0.115181] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
- [ 0.115188] pci 0000:00:1f.2: reg 0x24: [mem 0xc431c000-0xc431c7ff]
- [ 0.115225] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.115572] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
- [ 0.115589] pci 0000:00:1f.3: reg 0x10: [mem 0xc4318000-0xc43180ff 64bit]
- [ 0.115608] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
- [ 0.115983] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
- [ 0.116017] pci 0000:00:1f.6: reg 0x10: [mem 0xc431b000-0xc431bfff 64bit]
- [ 0.116504] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.116573] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.116603] pci 0000:02:00.0: reg 0x10: [io 0x4000-0x40ff]
- [ 0.116631] pci 0000:02:00.0: reg 0x18: [mem 0xc4200000-0xc4200fff 64bit]
- [ 0.116649] pci 0000:02:00.0: reg 0x20: [mem 0xc4000000-0xc4003fff 64bit pref]
- [ 0.116748] pci 0000:02:00.0: supports D1 D2
- [ 0.116749] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.118025] pci 0000:00:1c.2: PCI bridge to [bus 02]
- [ 0.118028] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
- [ 0.118031] pci 0000:00:1c.2: bridge window [mem 0xc4200000-0xc42fffff]
- [ 0.118036] pci 0000:00:1c.2: bridge window [mem 0xc4000000-0xc40fffff 64bit pref]
- [ 0.118108] pci 0000:03:00.0: [168c:0034] type 00 class 0x028000
- [ 0.118162] pci 0000:03:00.0: reg 0x10: [mem 0xc4100000-0xc417ffff 64bit]
- [ 0.118243] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
- [ 0.118359] pci 0000:03:00.0: supports D1 D2
- [ 0.118360] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.122026] pci 0000:00:1c.3: PCI bridge to [bus 03]
- [ 0.122031] pci 0000:00:1c.3: bridge window [mem 0xc4100000-0xc41fffff]
- [ 0.122100] pci 0000:04:00.0: [10de:139a] type 00 class 0x030200
- [ 0.122132] pci 0000:04:00.0: reg 0x10: [mem 0xc3000000-0xc3ffffff]
- [ 0.122149] pci 0000:04:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
- [ 0.122168] pci 0000:04:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
- [ 0.122180] pci 0000:04:00.0: reg 0x24: [io 0x3000-0x307f]
- [ 0.122193] pci 0000:04:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
- [ 0.126025] pci 0000:00:1c.4: PCI bridge to [bus 04]
- [ 0.126028] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
- [ 0.126031] pci 0000:00:1c.4: bridge window [mem 0xc3000000-0xc3ffffff]
- [ 0.126036] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
- [ 0.129600] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
- [ 0.129679] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 0.129755] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.129831] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 0.129905] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 0.129981] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 0.130064] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.130142] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
- [ 0.130639] ACPI: EC: interrupt unblocked
- [ 0.130647] ACPI: EC: event unblocked
- [ 0.130654] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2f, EC_CMD/EC_SC=0x66, EC_DATA=0x62
- [ 0.130656] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
- [ 0.130732] pci 0000:00:02.0: vgaarb: setting as boot VGA device
- [ 0.130732] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
- [ 0.130732] pci 0000:00:02.0: vgaarb: bridge control possible
- [ 0.130732] vgaarb: loaded
- [ 0.145928] EDAC MC: Ver: 3.0.0
- [ 0.147025] PCI: Using ACPI for IRQ routing
- [ 0.151000] PCI: pci_cache_line_size set to 64 bytes
- [ 0.151000] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
- [ 0.151000] e820: reserve RAM buffer [mem 0x968da000-0x97ffffff]
- [ 0.151000] e820: reserve RAM buffer [mem 0x9c8ef000-0x9fffffff]
- [ 0.151000] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
- [ 0.151000] e820: reserve RAM buffer [mem 0x1df000000-0x1dfffffff]
- [ 0.151000] NetLabel: Initializing
- [ 0.151000] NetLabel: domain hash size = 128
- [ 0.151000] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 0.151000] NetLabel: unlabeled traffic allowed by default
- [ 0.152309] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.152316] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.155019] clocksource: Switched to clocksource hpet
- [ 0.165063] VFS: Disk quotas dquot_6.6.0
- [ 0.165079] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.165156] pnp: PnP ACPI init
- [ 0.165419] system 00:00: [io 0xffff] has been reserved
- [ 0.165422] system 00:00: [io 0xffff] has been reserved
- [ 0.165424] system 00:00: [io 0xffff] has been reserved
- [ 0.165426] system 00:00: [io 0x1800-0x18fe] could not be reserved
- [ 0.165428] system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved
- [ 0.165434] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.165495] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.165545] system 00:02: [io 0x1854-0x1857] has been reserved
- [ 0.165549] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 0.165666] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.166292] system 00:04: [mem 0xfe106000-0xfe106fff] has been reserved
- [ 0.166297] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.167396] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.167398] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 0.167400] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.167401] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 0.167403] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.167405] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.167407] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
- [ 0.167409] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 0.167411] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
- [ 0.167413] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 0.167415] system 00:05: [mem 0xa0010000-0xa001ffff] has been reserved
- [ 0.167416] system 00:05: [mem 0xa0000000-0xa000ffff] has been reserved
- [ 0.167421] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.167796] pnp: PnP ACPI: found 6 devices
- [ 0.173903] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 0.173908] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
- [ 0.173910] pci 0000:04:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
- [ 0.173920] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
- [ 0.173923] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
- [ 0.173925] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
- [ 0.173947] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa02fffff]
- [ 0.173952] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0300000-0xa04fffff 64bit pref]
- [ 0.173955] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
- [ 0.173957] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.173960] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
- [ 0.173964] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa02fffff]
- [ 0.173967] pci 0000:00:1c.0: bridge window [mem 0xa0300000-0xa04fffff 64bit pref]
- [ 0.173973] pci 0000:00:1c.2: PCI bridge to [bus 02]
- [ 0.173975] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
- [ 0.173979] pci 0000:00:1c.2: bridge window [mem 0xc4200000-0xc42fffff]
- [ 0.173982] pci 0000:00:1c.2: bridge window [mem 0xc4000000-0xc40fffff 64bit pref]
- [ 0.173988] pci 0000:03:00.0: BAR 6: assigned [mem 0xc4180000-0xc418ffff pref]
- [ 0.173990] pci 0000:00:1c.3: PCI bridge to [bus 03]
- [ 0.173994] pci 0000:00:1c.3: bridge window [mem 0xc4100000-0xc41fffff]
- [ 0.174007] pci 0000:04:00.0: BAR 6: no space for [mem size 0x00080000 pref]
- [ 0.174009] pci 0000:04:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
- [ 0.174011] pci 0000:00:1c.4: PCI bridge to [bus 04]
- [ 0.174013] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
- [ 0.174017] pci 0000:00:1c.4: bridge window [mem 0xc3000000-0xc3ffffff]
- [ 0.174020] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
- [ 0.174026] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
- [ 0.174028] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
- [ 0.174030] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 0.174031] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xdfffffff window]
- [ 0.174033] pci_bus 0000:00: resource 8 [mem 0xfe000000-0xfe113fff window]
- [ 0.174035] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
- [ 0.174036] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa02fffff]
- [ 0.174038] pci_bus 0000:01: resource 2 [mem 0xa0300000-0xa04fffff 64bit pref]
- [ 0.174040] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
- [ 0.174041] pci_bus 0000:02: resource 1 [mem 0xc4200000-0xc42fffff]
- [ 0.174043] pci_bus 0000:02: resource 2 [mem 0xc4000000-0xc40fffff 64bit pref]
- [ 0.174045] pci_bus 0000:03: resource 1 [mem 0xc4100000-0xc41fffff]
- [ 0.174046] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
- [ 0.174048] pci_bus 0000:04: resource 1 [mem 0xc3000000-0xc3ffffff]
- [ 0.174050] pci_bus 0000:04: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
- [ 0.174228] NET: Registered protocol family 2
- [ 0.174389] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.174506] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.174624] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.174658] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.174681] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.174734] NET: Registered protocol family 1
- [ 0.174747] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 0.174860] pci 0000:00:14.0: can't derive routing for PCI INT A
- [ 0.174862] pci 0000:00:14.0: PCI INT A: no GSI
- [ 0.188157] PCI: CLS 64 bytes, default 64
- [ 0.188192] Unpacking initramfs...
- [ 0.319235] Freeing initrd memory: 8880K
- [ 0.319263] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.319267] software IO TLB [mem 0x988ef000-0x9c8ef000] (64MB) mapped at [000000007ff7997a-00000000fec2a604]
- [ 0.319384] Scanning for low memory corruption every 60 seconds
- [ 0.319899] Initialise system trusted keyrings
- [ 0.319909] Key type blacklist registered
- [ 0.319966] workingset: timestamp_bits=44 max_order=21 bucket_order=0
- [ 0.321033] zbud: loaded
- [ 0.322870] Key type asymmetric registered
- [ 0.322871] Asymmetric key parser 'x509' registered
- [ 0.322897] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 0.322935] io scheduler noop registered
- [ 0.322936] io scheduler deadline registered
- [ 0.322979] io scheduler cfq registered (default)
- [ 0.322981] io scheduler mq-deadline registered
- [ 0.322982] io scheduler kyber registered
- [ 0.323011] io scheduler bfq registered
- [ 0.323922] pcieport 0000:00:1c.0: Signaling PME with IRQ 42
- [ 0.323940] pcieport 0000:00:1c.2: Signaling PME with IRQ 43
- [ 0.323955] pcieport 0000:00:1c.3: Signaling PME with IRQ 44
- [ 0.323971] pcieport 0000:00:1c.4: Signaling PME with IRQ 45
- [ 0.323989] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
- [ 0.324059] vesafb: mode is 1366x768x32, linelength=5504, pages=0
- [ 0.324060] vesafb: scrolling: redraw
- [ 0.324062] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 0.324073] vesafb: framebuffer at 0xd0000000, mapped to 0x00000000f3d78d89, using 4160k, total 4160k
- [ 0.424056] Console: switching to colour frame buffer device 170x48
- [ 0.523752] fb0: VESA VGA frame buffer device
- [ 0.523773] intel_idle: MWAIT substates: 0x11142120
- [ 0.523774] intel_idle: v0.4.1 model 0x3D
- [ 0.523965] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 0.524045] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
- [ 0.524068] ACPI: Lid Switch [LID0]
- [ 0.524104] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
- [ 0.524125] ACPI: Sleep Button [SLPB]
- [ 0.524158] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- [ 0.524176] ACPI: Power Button [PWRF]
- [ 0.525054] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
- [ 0.525143] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.525145] ACPI: Thermal Zone [TZS0] (49 C)
- [ 0.525426] thermal LNXTHERM:01: registered as thermal_zone1
- [ 0.525427] ACPI: Thermal Zone [TZS1] (37 C)
- [ 0.525636] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.526667] intel_pstate: Intel P-state driver initializing
- [ 0.526904] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.527466] NET: Registered protocol family 10
- [ 0.536765] Segment Routing with IPv6
- [ 0.536817] NET: Registered protocol family 17
- [ 0.537447] RAS: Correctable Errors collector initialized.
- [ 0.537515] microcode: sig=0x306d4, pf=0x40, revision=0x2a
- [ 0.537653] microcode: Microcode Update Driver: v2.2.
- [ 0.537685] sched_clock: Marking stable (537637903, 0)->(536822076, 815827)
- [ 0.538223] registered taskstats version 1
- [ 0.538237] Loading compiled-in X.509 certificates
- [ 0.538276] zswap: loaded using pool lzo/zbud
- [ 0.542093] Key type big_key registered
- [ 0.543037] Magic number: 10:633:865
- [ 0.543099] hctosys: unable to open rtc device (rtc0)
- [ 0.545290] Freeing unused kernel memory: 1432K
- [ 0.545292] Write protecting the kernel read-only data: 16384k
- [ 0.545921] Freeing unused kernel memory: 2016K
- [ 0.548634] Freeing unused kernel memory: 872K
- [ 0.613440] i8042: PNP: PS/2 Controller [PNP0303:KBD0] at 0x60,0x64 irq 1
- [ 0.613442] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- [ 0.614687] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.623457] ACPI: bus type USB registered
- [ 0.623516] usbcore: registered new interface driver usbfs
- [ 0.623529] usbcore: registered new interface driver hub
- [ 0.623557] usbcore: registered new device driver usb
- [ 0.626117] SCSI subsystem initialized
- [ 0.631109] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.633927] ehci-pci: EHCI PCI platform driver
- [ 0.634016] libata version 3.00 loaded.
- [ 0.634205] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 0.634213] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
- [ 0.634227] ehci-pci 0000:00:1d.0: debug port 2
- [ 0.638125] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- [ 0.638146] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc431d000
- [ 0.645020] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 0.645067] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.645069] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.645070] usb usb1: Product: EHCI Host Controller
- [ 0.645072] usb usb1: Manufacturer: Linux 4.15.12-1-ARCH ehci_hcd
- [ 0.645073] usb usb1: SerialNumber: 0000:00:1d.0
- [ 0.645198] hub 1-0:1.0: USB hub found
- [ 0.645204] hub 1-0:1.0: 2 ports detected
- [ 0.645392] ahci 0000:00:1f.2: version 3.0
- [ 0.655729] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
- [ 0.655733] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
- [ 0.656317] scsi host0: ahci
- [ 0.656579] scsi host1: ahci
- [ 0.656646] ata1: SATA max UDMA/133 abar m2048@0xc431c000 port 0xc431c100 irq 46
- [ 0.656648] ata2: SATA max UDMA/133 abar m2048@0xc431c000 port 0xc431c180 irq 46
- [ 0.656904] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
- [ 0.656906] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
- [ 0.656937] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 0.656946] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
- [ 0.658065] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
- [ 0.658071] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
- [ 0.658240] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.658243] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.658245] usb usb2: Product: xHCI Host Controller
- [ 0.658248] usb usb2: Manufacturer: Linux 4.15.12-1-ARCH xhci-hcd
- [ 0.658250] usb usb2: SerialNumber: 0000:00:14.0
- [ 0.658440] hub 2-0:1.0: USB hub found
- [ 0.658458] hub 2-0:1.0: 11 ports detected
- [ 0.658526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
- [ 0.659541] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 0.659546] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
- [ 0.659602] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
- [ 0.659605] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.659607] usb usb3: Product: xHCI Host Controller
- [ 0.659609] usb usb3: Manufacturer: Linux 4.15.12-1-ARCH xhci-hcd
- [ 0.659612] usb usb3: SerialNumber: 0000:00:14.0
- [ 0.659782] hub 3-0:1.0: USB hub found
- [ 0.659794] hub 3-0:1.0: 4 ports detected
- [ 0.965781] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 0.965810] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 0.966796] ata1.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
- [ 0.966802] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 0.967844] ata1.00: configured for UDMA/133
- [ 0.968269] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-22J 1A01 PQ: 0 ANSI: 5
- [ 0.969252] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8HC, 1.00, max UDMA/100
- [ 0.969276] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 0.976839] ata2.00: configured for UDMA/100
- [ 0.982647] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8HC 1.00 PQ: 0 ANSI: 5
- [ 0.985067] usb 2-1: new full-speed USB device number 2 using xhci_hcd
- [ 1.014666] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
- [ 1.014670] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 1.014686] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.014689] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.014715] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.046525] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.046528] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.046707] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 1.061613] sda: sda1 sda2 sda3 sda4
- [ 1.062083] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.097796] usb 1-1: New USB device found, idVendor=8087, idProduct=8001
- [ 1.097800] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.098146] hub 1-1:1.0: USB hub found
- [ 1.098206] hub 1-1:1.0: 8 ports detected
- [ 1.113135] usb 2-1: New USB device found, idVendor=09da, idProduct=7c3b
- [ 1.113143] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.113149] usb 2-1: Product: USB Device
- [ 1.113154] usb 2-1: Manufacturer: COMPANY
- [ 1.118470] hidraw: raw HID events driver (C) Jiri Kosina
- [ 1.123000] usbcore: registered new interface driver usbhid
- [ 1.123002] usbhid: USB HID core driver
- [ 1.123965] input: COMPANY USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:09DA:7C3B.0001/input/input4
- [ 1.175199] hid-generic 0003:09DA:7C3B.0001: input,hidraw0: USB HID v1.11 Keyboard [COMPANY USB Device] on usb-0000:00:14.0-1/input0
- [ 1.175322] input: COMPANY USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:09DA:7C3B.0002/input/input5
- [ 1.175362] hid-generic 0003:09DA:7C3B.0002: input,hidraw1: USB HID v1.11 Mouse [COMPANY USB Device] on usb-0000:00:14.0-1/input1
- [ 1.175568] input: COMPANY USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:09DA:7C3B.0003/input/input6
- [ 1.227619] hid-generic 0003:09DA:7C3B.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [COMPANY USB Device] on usb-0000:00:14.0-1/input2
- [ 1.375070] tsc: Refined TSC clocksource calibration: 2194.918 MHz
- [ 1.375078] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa37202099, max_idle_ns: 440795206796 ns
- [ 1.375082] usb 1-1.5: new full-speed USB device number 3 using ehci-pci
- [ 1.454265] usb 1-1.5: New USB device found, idVendor=04ca, idProduct=300d
- [ 1.454268] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.518090] usb 1-1.7: new high-speed USB device number 4 using ehci-pci
- [ 1.606010] usb 1-1.7: New USB device found, idVendor=04f2, idProduct=b469
- [ 1.606012] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.606014] usb 1-1.7: Product: HD WebCam
- [ 1.606016] usb 1-1.7: Manufacturer: Chicony Electronics Co.,Ltd.
- [ 1.672089] usb 1-1.8: new high-speed USB device number 5 using ehci-pci
- [ 1.750958] usb 1-1.8: New USB device found, idVendor=0bda, idProduct=0129
- [ 1.750961] usb 1-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.750962] usb 1-1.8: Product: USB2.0-CRW
- [ 1.750964] usb 1-1.8: Manufacturer: Generic
- [ 1.750965] usb 1-1.8: SerialNumber: 20100201396000000
- [ 1.756459] usbcore: registered new interface driver rtsx_usb
- [ 1.838590] random: crng init done
- [ 2.042141] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.383233] clocksource: Switched to clocksource tsc
- [ 3.437971] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.545146] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
- [ 3.557289] systemd[1]: Detected architecture x86-64.
- [ 3.576707] systemd[1]: Set hostname to <jarvis>.
- [ 5.015884] systemd[1]: Created slice User and Session Slice.
- [ 5.016093] systemd[1]: Listening on Journal Socket.
- [ 5.017410] systemd[1]: Mounting Kernel Debug File System...
- [ 5.017794] systemd[1]: Created slice system-getty.slice.
- [ 5.019445] systemd[1]: Listening on Process Core Dump Socket.
- [ 5.075397] systemd[1]: Reached target Login Prompts.
- [ 5.075441] systemd[1]: Reached target Swap.
- [ 5.327961] EXT4-fs (sda4): re-mounted. Opts: data=ordered
- [ 5.764469] systemd-journald[213]: Received request to flush runtime journal from PID 1
- [ 8.621092] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
- [ 8.651870] i801_smbus 0000:00:1f.3: SPD Write Disable is set
- [ 8.651905] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
- [ 8.793712] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 8.810317] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
- [ 8.810320] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
- [ 8.810321] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
- [ 8.810323] wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
- [ 8.810422] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
- [ 8.818507] Linux agpgart interface v0.103
- [ 8.833410] ACPI: Battery Slot [BAT0] (battery present)
- [ 8.855127] i2c_hid i2c-SYN1B7F:00: i2c-SYN1B7F:00 supply vdd not found, using dummy regulator
- [ 8.984409] rtc_cmos 00:01: RTC can wake from S4
- [ 8.984421] rtc_cmos: probe of 00:01 failed with error -16
- [ 9.003549] ACPI: AC Adapter [ADP1] (off-line)
- [ 9.387438] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 9.389769] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 9.543118] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 9.543129] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
- [ 9.546996] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x000000004626c2e0, 30:65:ec:86:20:72, XID 0c000800 IRQ 49
- [ 9.546999] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 9.634370] [drm] Memory usable by graphics device = 4096M
- [ 9.634374] checking generic (d0000000 410000) vs hw (d0000000 10000000)
- [ 9.634375] fb: switching to inteldrmfb from VESA VGA
- [ 9.634396] Console: switching to colour dummy device 80x25
- [ 9.634519] [drm] Replacing VGA console driver
- [ 9.640099] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 9.640101] [drm] Driver supports precise vblank timestamp query.
- [ 9.642132] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 9.663419] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
- [ 9.663584] Bluetooth: Core ver 2.22
- [ 9.663602] NET: Registered protocol family 31
- [ 9.663603] Bluetooth: HCI device and connection manager initialized
- [ 9.663608] Bluetooth: HCI socket layer initialized
- [ 9.663611] Bluetooth: L2CAP socket layer initialized
- [ 9.663621] Bluetooth: SCO socket layer initialized
- [ 9.665455] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 9.666064] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
- [ 9.666240] [Firmware Bug]: ACPI(PXSX) defines _DOD but not _DOS
- [ 9.666260] ACPI: Video Device [PXSX] (multi-head: yes rom: yes post: no)
- [ 9.666310] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4f/LNXVIDEO:01/input/input8
- [ 9.666436] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
- [ 9.675845] fbcon: inteldrmfb (fb0) is primary device
- [ 9.694765] input: PC Speaker as /devices/platform/pcspkr/input/input9
- [ 9.698390] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
- [ 9.698392] cfg80211: failed to load regulatory.db
- [ 9.806364] usbcore: registered new interface driver btusb
- [ 9.825077] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
- [ 9.825077] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
- [ 9.825078] RAPL PMU: hw unit of domain package 2^-14 Joules
- [ 9.825079] RAPL PMU: hw unit of domain dram 2^-14 Joules
- [ 9.825079] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
- [ 9.828394] usbcore: registered new interface driver ath3k
- [ 9.954278] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
- [ 9.954352] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
- [ 9.954419] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
- [ 9.954488] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
- [ 9.954553] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
- [ 10.029876] ath: phy0: ASPM enabled: 0x43
- [ 10.029878] ath: EEPROM regdomain: 0x6a
- [ 10.029878] ath: EEPROM indicates we should expect a direct regpair map
- [ 10.029880] ath: Country alpha2 being used: 00
- [ 10.029880] ath: Regpair used: 0x6a
- [ 10.034171] acer_wmi: Acer Laptop ACPI-WMI Extras
- [ 10.034199] acer_wmi: Function bitmap for Communication Button: 0x801
- [ 10.037577] input: Acer WMI hotkeys as /devices/virtual/input/input15
- [ 10.062739] intel-spi intel-spi: s25fl064k (8192 Kbytes)
- [ 10.238455] AVX2 version of gcm_enc/dec engaged.
- [ 10.238455] AES CTR mode by8 optimization enabled
- [ 10.344704] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
- [ 10.344708] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 10.344711] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
- [ 10.344713] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
- [ 10.344714] snd_hda_codec_realtek hdaudioC1D0: inputs:
- [ 10.344717] snd_hda_codec_realtek hdaudioC1D0: Mic=0x12
- [ 10.371118] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 10.371667] ieee80211 phy0: Atheros AR9462 Rev:3 mem=0xffffab3801c00000, irq=19
- [ 10.374501] Creating 1 MTD partitions on "intel-spi":
- [ 10.374505] 0x000000000000-0x000000800000 : "BIOS"
- [ 10.386686] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
- [ 10.617485] input: SYN1B7F:00 06CB:7406 Touchpad as /devices/pci0000:00/INT3433:00/i2c-0/i2c-SYN1B7F:00/0018:06CB:7406.0004/input/input18
- [ 10.617561] hid-multitouch 0018:06CB:7406.0004: input,hidraw3: I2C HID v1.00 Mouse [SYN1B7F:00 06CB:7406] on i2c-SYN1B7F:00
- [ 10.782003] r8169 0000:02:00.0 enp2s0: renamed from eth0
- [ 10.784941] Console: switching to colour frame buffer device 170x48
- [ 10.805553] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- [ 11.251131] media: Linux media interface: v0.10
- [ 11.293165] Linux video capture interface: v2.00
- [ 11.335480] mousedev: PS/2 mouse device common for all mice
- [ 11.484251] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b469)
- [ 11.491896] uvcvideo 1-1.7:1.0: Entity type for entity Extension 4 was not initialized!
- [ 11.491899] uvcvideo 1-1.7:1.0: Entity type for entity Extension 3 was not initialized!
- [ 11.491902] uvcvideo 1-1.7:1.0: Entity type for entity Processing 2 was not initialized!
- [ 11.491904] uvcvideo 1-1.7:1.0: Entity type for entity Camera 1 was not initialized!
- [ 11.491997] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.7/1-1.7:1.0/input/input23
- [ 11.492093] usbcore: registered new interface driver uvcvideo
- [ 11.492094] USB Video Class driver (1.1.1)
- [ 11.496061] intel_rapl: Found RAPL domain package
- [ 11.496063] intel_rapl: Found RAPL domain core
- [ 11.496064] intel_rapl: Found RAPL domain uncore
- [ 11.496065] intel_rapl: Found RAPL domain dram
- [ 11.496067] intel_rapl: RAPL package 0 domain package locked by BIOS
- [ 11.496072] intel_rapl: RAPL package 0 domain dram locked by BIOS
- [ 12.680764] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
- [ 13.037224] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
- [ 23.375161] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 23.462595] r8169 0000:02:00.0 enp2s0: link down
- [ 23.462660] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 23.509527] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 23.521857] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 23.536411] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 25.006954] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 27.148581] ipmi message handler version 39.2
- [ 27.155387] ipmi device interface
- [ 27.326972] nvidia: loading out-of-tree module taints kernel.
- [ 27.326979] nvidia: module license 'NVIDIA' taints kernel.
- [ 27.326980] Disabling lock debugging due to kernel taint
- [ 27.345565] nvidia-nvlink: Nvlink Core is being initialized, major device number 240
- [ 27.345858] nvidia 0000:04:00.0: enabling device (0106 -> 0107)
- [ 27.346187] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.42 Sat Mar 3 04:10:22 PST 2018 (using threaded interrupts)
- [ 27.703205] bbswitch: version 0.8
- [ 27.703213] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
- [ 27.703218] bbswitch: Found discrete VGA device 0000:04:00.0: \_SB_.PCI0.RP05.PXSX
- [ 27.703230] ACPI Warning: \_SB.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
- [ 27.703373] bbswitch: detected an Optimus _DSM function
- [ 27.703382] bbswitch: Succesfully loaded. Discrete card 0000:04:00.0 is on
- [ 88.449267] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 92.336001] wlp3s0: authenticate with ea:28:5d:67:fd:e0
- [ 92.352866] wlp3s0: send auth to ea:28:5d:67:fd:e0 (try 1/3)
- [ 92.431055] wlp3s0: authenticated
- [ 92.432073] wlp3s0: associate with ea:28:5d:67:fd:e0 (try 1/3)
- [ 92.451509] wlp3s0: RX AssocResp from ea:28:5d:67:fd:e0 (capab=0x411 status=0 aid=1)
- [ 92.451646] wlp3s0: associated
- [ 94.948482] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
- [ 2353.590448] systemd: 38 output lines suppressed due to ratelimiting
- [ 2353.594611] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
- [ 2353.606244] systemd[1]: Detected architecture x86-64.
- [ 2373.037044] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
- [ 2420.129362] systemd[1]: Reloading.
- [ 3175.998597] TemplateCpp[13125]: segfault at 70 ip 00005622a7c55c5e sp 00007ffee66b4180 error 4 in TemplateCpp[5622a7776000+9f8000]
- [ 3266.539465] perf: interrupt took too long (3193 > 3128), lowering kernel.perf_event_max_sample_rate to 62000
- [ 3390.580697] TemplateCpp[13581]: segfault at 0 ip 00005624ed1cae86 sp 00007ffd10262df0 error 4 in TemplateCpp[5624ecdb1000+9f8000]
- [ 6684.002698] perf: interrupt took too long (3997 > 3991), lowering kernel.perf_event_max_sample_rate to 50000
- [ 8684.577847] wlp3s0: deauthenticating from ea:28:5d:67:fd:e0 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 8685.062136] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 8685.323159] PM: suspend entry (deep)
- [ 8685.323359] PM: Syncing filesystems ... done.
- [ 8686.978495] Freezing user space processes ... (elapsed 0.003 seconds) done.
- [ 8686.982393] OOM killer disabled.
- [ 8686.982396] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 8686.984063] Suspending console(s) (use no_console_suspend to debug)
- [ 8686.996411] sd 0:0:0:0: [sda] Synchronizing SCSI cache
- [ 8686.996580] sd 0:0:0:0: [sda] Stopping disk
- [ 8687.704604] ACPI: Preparing to enter system sleep state S3
- [ 8687.729428] ACPI: EC: event blocked
- [ 8687.729431] ACPI: EC: EC stopped
- [ 8687.729433] PM: Saving platform NVS memory
- [ 8687.729480] Disabling non-boot CPUs ...
- [ 8687.749355] smpboot: CPU 1 is now offline
- [ 8687.764512] smpboot: CPU 2 is now offline
- [ 8687.777121] smpboot: CPU 3 is now offline
- [ 8687.781849] ACPI: Low-level resume complete
- [ 8687.781944] ACPI: EC: EC started
- [ 8687.781945] PM: Restoring platform NVS memory
- [ 8687.790549] Enabling non-boot CPUs ...
- [ 8687.790586] x86: Booting SMP configuration:
- [ 8687.790588] smpboot: Booting Node 0 Processor 1 APIC 0x2
- [ 8687.792790] cache: parent cpu1 should not be sleeping
- [ 8687.792980] CPU1 is up
- [ 8687.793006] smpboot: Booting Node 0 Processor 2 APIC 0x1
- [ 8687.795252] cache: parent cpu2 should not be sleeping
- [ 8687.795450] CPU2 is up
- [ 8687.795487] smpboot: Booting Node 0 Processor 3 APIC 0x3
- [ 8687.797466] cache: parent cpu3 should not be sleeping
- [ 8687.797868] CPU3 is up
- [ 8687.806710] ACPI: Waking up from system sleep state S3
- [ 8687.935011] ACPI: EC: event unblocked
- [ 8687.935193] ath: phy0: ASPM enabled: 0x43
- [ 8687.935625] ACPI: button: The lid device is not compliant to SW_LID.
- [ 8687.945240] sd 0:0:0:0: [sda] Starting disk
- [ 8687.973285] r8169 0000:02:00.0 enp2s0: link down
- [ 8688.154580] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci
- [ 8688.156720] usb 2-1: reset full-speed USB device number 2 using xhci_hcd
- [ 8688.232908] usb 1-1.5: device firmware changed
- [ 8688.256365] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 8688.275826] ata2.00: configured for UDMA/100
- [ 8688.296559] usb 1-1.7: reset high-speed USB device number 4 using ehci-pci
- [ 8688.440625] usb 1-1.8: reset high-speed USB device number 5 using ehci-pci
- [ 8688.521780] OOM killer enabled.
- [ 8688.521783] Restarting tasks ...
- [ 8688.525170] pci_bus 0000:01: Allocating resources
- [ 8688.525201] pci_bus 0000:02: Allocating resources
- [ 8688.525232] pci_bus 0000:03: Allocating resources
- [ 8688.525260] pcieport 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
- [ 8688.525271] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
- [ 8688.525285] pci_bus 0000:04: Allocating resources
- [ 8688.525334] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xa0500000-0xa06fffff 64bit pref]
- [ 8688.525347] pcieport 0000:00:1c.3: BAR 13: assigned [io 0x6000-0x6fff]
- [ 8688.526510] usb 1-1.5: USB disconnect, device number 3
- [ 8688.527066] pci_bus 0000:01: Allocating resources
- [ 8688.527096] pci_bus 0000:02: Allocating resources
- [ 8688.527111] pci_bus 0000:03: Allocating resources
- [ 8688.527128] pci_bus 0000:04: Allocating resources
- [ 8688.528103] done.
- [ 8688.540902] PM: suspend exit
- [ 8688.565776] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 8688.596486] usb 1-1.5: new full-speed USB device number 6 using ehci-pci
- [ 8688.603007] r8169 0000:02:00.0 enp2s0: link down
- [ 8688.603063] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 8688.603875] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 8688.613693] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 8688.628252] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 8688.654866] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 8688.680409] usb 1-1.5: New USB device found, idVendor=04ca, idProduct=300d
- [ 8688.680416] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 8690.752573] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 8690.894457] ata1.00: configured for UDMA/133
- [ 8691.264643] usb 1-1.5: USB disconnect, device number 6
- [ 8691.437491] usb 1-1.5: new full-speed USB device number 7 using ehci-pci
- [ 8696.869505] usb 1-1.5: device descriptor read/64, error -110
- [ 8702.516919] usb 1-1.5: New USB device found, idVendor=04ca, idProduct=300d
- [ 8702.516926] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 8714.904087] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 8718.740715] wlp3s0: authenticate with ea:28:5d:67:fd:e0
- [ 8718.754366] wlp3s0: send auth to ea:28:5d:67:fd:e0 (try 1/3)
- [ 8718.757983] wlp3s0: authenticated
- [ 8718.758483] wlp3s0: associate with ea:28:5d:67:fd:e0 (try 1/3)
- [ 8718.762514] wlp3s0: RX AssocResp from ea:28:5d:67:fd:e0 (capab=0x411 status=0 aid=3)
- [ 8718.762680] wlp3s0: associated
- [ 8718.995957] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
- [ 8799.663695] Chrome_~dThread[8912]: segfault at 0 ip 00007f6487bc5afd sp 00007f6481b73b00 error 6 in libxul.so (deleted)[7f64877d1000+4c15000]
- [ 8799.664207] Chrome_~dThread[8859]: segfault at 0 ip 00007fdf037c5afd sp 00007fdefd773b00 error 6 in libxul.so (deleted)[7fdf033d1000+4c15000]
- [ 8799.664329] Chrome_~dThread[14964]: segfault at 0 ip 00007f54999c6aed sp 00007f5493974b00 error 6
- [ 8799.664332] Chrome_~dThread[9372]: segfault at 0 ip 00007f9bb95c5afd sp 00007f9bb3573b00 error 6
- [ 8799.664334] in libxul.so[7f54995d2000+4c14000]
- [ 8799.664338] in libxul.so (deleted)[7f9bb91d1000+4c15000]
- [10716.933264] TemplateCpp[16829]: segfault at 70 ip 000055b470c6dcc4 sp 00007ffe181f01f0 error 4 in TemplateCpp[55b47078e000+9f8000]
- [13340.052764] perf: interrupt took too long (5008 > 4996), lowering kernel.perf_event_max_sample_rate to 39000
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement