API tools faq
paste
Latrina

Untitled

Latrina
Nov 8th, 2021
70
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.19 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
  2. [ 0.000000] Linux version 5.10.61-0-rpi4 (buildozer@build-3-14-aarch64) (gcc (Alpine 10.3.1_git20210424) 10.3.1 20210424, GNU ld (GNU Binutils) 2.35.2) #1-Alpine SMP PREEMPT Thu Aug 26 22:38:20 UTC 2021
  3. [ 0.000000] random: fast init done
  4. [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4
  5. [ 0.000000] efi: UEFI not found.
  6. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000002a800000, size 64 MiB
  7. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  8. [ 0.000000] Zone ranges:
  9. [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
  10. [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
  11. [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
  12. [ 0.000000] Movable zone start for each node
  13. [ 0.000000] Early memory node ranges
  14. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
  15. [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
  16. [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
  17. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
  18. [ 0.000000] percpu: Embedded 32 pages/cpu s91096 r8192 d31784 u131072
  19. [ 0.000000] Detected PIPT I-cache on CPU0
  20. [ 0.000000] CPU features: detected: Spectre-v2
  21. [ 0.000000] CPU features: detected: Spectre-v4
  22. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  23. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028848
  24. [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:D6:35:2E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=/dev/nfs nfsroot=172.12.1.57:/zfs/netboot/node0,vers=3,proto=tcp rw ip=dhcp rootfstype=nfs rootwait cgroup_memory=1 cgroup_enable=memory
  25. [ 0.000000] cgroup: Enabling memory control group subsystem
  26. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
  27. [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  28. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  29. [ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
  30. [ 0.000000] Memory: 7927128K/8245248K available (10944K kernel code, 1944K rwdata, 3944K rodata, 2560K init, 1251K bss, 252584K reserved, 65536K cma-reserved)
  31. [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x28/0x4c0 with crng_init=1
  32. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  33. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  34. [ 0.000000] rcu: RCU event tracing is enabled.
  35. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  36. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  37. [ 0.000000] Tracing variant of Tasks RCU enabled.
  38. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  39. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  40. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  41. [ 0.000000] GIC: Using split EOI/Deactivate mode
  42. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  43. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  44. [ 0.000003] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  45. [ 0.000115] Console: colour dummy device 80x25
  46. [ 0.000313] printk: console [tty1] enabled
  47. [ 0.000345] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
  48. [ 0.000362] pid_max: default: 32768 minimum: 301
  49. [ 0.000456] LSM: Security Framework initializing
  50. [ 0.000604] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  51. [ 0.000669] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  52. [ 0.002022] rcu: Hierarchical SRCU implementation.
  53. [ 0.002528] EFI services will not be available.
  54. [ 0.002764] smp: Bringing up secondary CPUs ...
  55. [ 0.003179] Detected PIPT I-cache on CPU1
  56. [ 0.003218] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
  57. [ 0.003683] Detected PIPT I-cache on CPU2
  58. [ 0.003702] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
  59. [ 0.004198] Detected PIPT I-cache on CPU3
  60. [ 0.004217] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
  61. [ 0.004276] smp: Brought up 1 node, 4 CPUs
  62. [ 0.004293] SMP: Total of 4 processors activated.
  63. [ 0.004302] CPU features: detected: 32-bit EL0 Support
  64. [ 0.004310] CPU features: detected: CRC32 instructions
  65. [ 0.004319] CPU features: detected: 32-bit EL1 Support
  66. [ 0.017718] CPU: All CPU(s) started at EL2
  67. [ 0.017755] alternatives: patching kernel code
  68. [ 0.018771] devtmpfs: initialized
  69. [ 0.023268] Enabled cp15_barrier support
  70. [ 0.023302] Enabled setend support
  71. [ 0.023585] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  72. [ 0.023612] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  73. [ 0.024966] pinctrl core: initialized pinctrl subsystem
  74. [ 0.026269] DMI not present or invalid.
  75. [ 0.026487] NET: Registered protocol family 16
  76. [ 0.027690] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
  77. [ 0.027801] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  78. [ 0.028176] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  79. [ 0.028234] audit: initializing netlink subsys (disabled)
  80. [ 0.028377] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1
  81. [ 0.029735] thermal_sys: Registered thermal governor 'step_wise'
  82. [ 0.030066] cpuidle: using governor menu
  83. [ 0.030187] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  84. [ 0.030266] ASID allocator initialised with 65536 entries
  85. [ 0.030399] Serial: AMBA PL011 UART driver
  86. [ 0.044859] bcm2835-mbox fe00b880.mailbox: mailbox enabled
  87. [ 0.052107] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-08-03T18:14:56, variant start
  88. [ 0.056109] raspberrypi-firmware soc:firmware: Firmware hash is 40787ee5905644f639a2a0f6e00ae12e517a2211
  89. [ 0.086963] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
  90. [ 0.088873] vgaarb: loaded
  91. [ 0.089165] SCSI subsystem initialized
  92. [ 0.089329] usbcore: registered new interface driver usbfs
  93. [ 0.089365] usbcore: registered new interface driver hub
  94. [ 0.089423] usbcore: registered new device driver usb
  95. [ 0.089598] usb_phy_generic phy: supply vcc not found, using dummy regulator
  96. [ 0.090726] clocksource: Switched to clocksource arch_sys_counter
  97. [ 0.500422] VFS: Disk quotas dquot_6.6.0
  98. [ 0.500484] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  99. [ 0.500566] FS-Cache: Loaded
  100. [ 0.500701] CacheFiles: Loaded
  101. [ 0.506029] NET: Registered protocol family 2
  102. [ 0.506635] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  103. [ 0.509031] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
  104. [ 0.509134] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
  105. [ 0.509322] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
  106. [ 0.510204] TCP: Hash tables configured (established 65536 bind 65536)
  107. [ 0.510408] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
  108. [ 0.510475] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
  109. [ 0.510703] NET: Registered protocol family 1
  110. [ 0.511236] RPC: Registered named UNIX socket transport module.
  111. [ 0.511247] RPC: Registered udp transport module.
  112. [ 0.511255] RPC: Registered tcp transport module.
  113. [ 0.511262] RPC: Registered tcp NFSv4.1 backchannel transport module.
  114. [ 0.511276] PCI: CLS 0 bytes, default 64
  115. [ 0.511398] Trying to unpack rootfs image as initramfs...
  116. [ 0.668600] Freeing initrd memory: 5548K
  117. [ 0.669490] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  118. [ 0.669709] kvm [1]: IPA Size Limit: 44 bits
  119. [ 0.670186] kvm [1]: vgic interrupt IRQ9
  120. [ 0.670306] kvm [1]: Hyp mode initialized successfully
  121. [ 0.672281] Initialise system trusted keyrings
  122. [ 0.672424] workingset: timestamp_bits=46 max_order=21 bucket_order=0
  123. [ 0.675027] zbud: loaded
  124. [ 0.675947] FS-Cache: Netfs 'nfs' registered for caching
  125. [ 0.676247] NFS: Registering the id_resolver key type
  126. [ 0.676270] Key type id_resolver registered
  127. [ 0.676278] Key type id_legacy registered
  128. [ 0.676334] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  129. [ 0.676344] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  130. [ 0.676948] Key type asymmetric registered
  131. [ 0.676960] Asymmetric key parser 'x509' registered
  132. [ 0.677054] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  133. [ 0.677157] io scheduler mq-deadline registered
  134. [ 0.677167] io scheduler kyber registered
  135. [ 0.680027] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
  136. [ 0.680052] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
  137. [ 0.680084] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
  138. [ 0.680118] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
  139. [ 0.736784] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
  140. [ 0.737045] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
  141. [ 0.737059] pci_bus 0000:00: root bus resource [bus 00-ff]
  142. [ 0.737070] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
  143. [ 0.737113] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
  144. [ 0.737215] pci 0000:00:00.0: PME# supported from D0 D3hot
  145. [ 0.738761] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  146. [ 0.739023] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
  147. [ 0.739113] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
  148. [ 0.739385] pci 0000:01:00.0: PME# supported from D0 D3hot
  149. [ 0.756000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  150. [ 0.756027] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
  151. [ 0.756040] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
  152. [ 0.756062] pci 0000:00:00.0: PCI bridge to [bus 01]
  153. [ 0.756074] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
  154. [ 0.756492] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.
  155. [ 0.756512] bcm2708_fb: probe of soc:fb failed with error -2
  156. [ 0.759443] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
  157. [ 0.761730] iproc-rng200 fe104000.rng: hwrng registered
  158. [ 0.762126] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  159. [ 0.763047] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
  160. [ 0.763367] cacheinfo: Unable to detect cache hierarchy for CPU 0
  161. [ 0.770385] brd: module loaded
  162. [ 0.777559] loop: module loaded
  163. [ 0.778863] Loading iSCSI transport class v2.0-870.
  164. [ 0.787757] libphy: Fixed MDIO Bus: probed
  165. [ 0.792804] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
  166. [ 0.802781] libphy: bcmgenet MII bus: probed
  167. [ 0.854998] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
  168. [ 0.857607] usbcore: registered new interface driver r8152
  169. [ 0.857839] usbcore: registered new interface driver lan78xx
  170. [ 0.858043] usbcore: registered new interface driver smsc95xx
  171. [ 0.905722] pci 0000:00:00.0: enabling device (0000 -> 0002)
  172. [ 0.905920] xhci_hcd 0000:01:00.0: xHCI Host Controller
  173. [ 0.905972] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  174. [ 0.906703] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
  175. [ 0.907969] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  176. [ 0.908000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  177. [ 0.908025] usb usb1: Product: xHCI Host Controller
  178. [ 0.908046] usb usb1: Manufacturer: Linux 5.10.61-0-rpi4 xhci-hcd
  179. [ 0.908066] usb usb1: SerialNumber: 0000:01:00.0
  180. [ 0.909071] hub 1-0:1.0: USB hub found
  181. [ 0.909189] hub 1-0:1.0: 1 port detected
  182. [ 0.910083] xhci_hcd 0000:01:00.0: xHCI Host Controller
  183. [ 0.910119] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  184. [ 0.910154] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
  185. [ 0.910536] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
  186. [ 0.910564] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  187. [ 0.910588] usb usb2: Product: xHCI Host Controller
  188. [ 0.910608] usb usb2: Manufacturer: Linux 5.10.61-0-rpi4 xhci-hcd
  189. [ 0.910628] usb usb2: SerialNumber: 0000:01:00.0
  190. [ 0.911581] hub 2-0:1.0: USB hub found
  191. [ 0.911667] hub 2-0:1.0: 4 ports detected
  192. [ 0.913784] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  193. [ 0.914840] usbcore: registered new interface driver uas
  194. [ 0.915097] usbcore: registered new interface driver usb-storage
  195. [ 0.915460] mousedev: PS/2 mouse device common for all mice
  196. [ 0.918792] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  197. [ 0.923341] sdhci: Secure Digital Host Controller Interface driver
  198. [ 0.923377] sdhci: Copyright(c) Pierre Ossman
  199. [ 0.924028] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
  200. [ 0.924808] sdhci-pltfm: SDHCI platform and OF driver helper
  201. [ 0.929233] ledtrig-cpu: registered to indicate activity on CPUs
  202. [ 0.930409] hid: raw HID events driver (C) Jiri Kosina
  203. [ 0.931122] usbcore: registered new interface driver usbhid
  204. [ 0.931149] usbhid: USB HID core driver
  205. [ 0.931608] ashmem: initialized
  206. [ 0.940294] Initializing XFRM netlink socket
  207. [ 0.940449] Key type dns_resolver registered
  208. [ 0.940918] registered taskstats version 1
  209. [ 0.940953] Loading compiled-in X.509 certificates
  210. [ 0.941415] Key type ._fscrypt registered
  211. [ 0.941439] Key type .fscrypt registered
  212. [ 0.941457] Key type fscrypt-provisioning registered
  213. [ 0.952235] uart-pl011 fe201000.serial: there is not valid maps for state default
  214. [ 0.952492] uart-pl011 fe201000.serial: cts_event_workaround enabled
  215. [ 0.952616] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2
  216. [ 2.251158] printk: console [ttyAMA0] enabled
  217. [ 2.263027] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  218. [ 2.271311] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
  219. [ 2.277411] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
  220. [ 2.311872] of_cfs_init
  221. [ 2.314455] of_cfs_init: OK
  222. [ 2.336053] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  223. [ 2.343227] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  224. [ 2.347588] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
  225. [ 2.350383] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  226. [ 2.364646] Freeing unused kernel memory: 2560K
  227. [ 2.372235] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  228. [ 2.379409] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  229. [ 2.386814] usb 1-1: new high-speed USB device number 2 using xhci_hcd
  230. [ 2.390925] Run /init as init process
  231. [ 2.456569] mmc1: new high speed SDIO card at address 0001
  232. [ 2.461900] Alpine Init 3.5.0-r0
  233. [ 2.467027] Loading boot drivers...
  234. [ 2.485844] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  235. [ 2.492986] Loading boot drivers: ok.
  236. [ 2.500567] Mounting root...
  237. [ 2.541569] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
  238. [ 2.550311] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  239. [ 2.558893] usb 1-1: Product: USB2.0 Hub
  240. [ 2.566785] hub 1-1:1.0: USB hub found
  241. [ 2.572307] hub 1-1:1.0: 4 ports detected
  242. [ 8.108373] Mounting root: failed.
  243. [ 33.758783] vcc-sd: disabling
  244.  
  245. FATAL: read zero bytes from port
  246. term_exitfunc: reset failed for dev UNKNOWN: Input/output error
  247. admin@gentoo ~ $
  248.  
  249.  
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!