Advertisement
Guest User

disk 2

a guest
Apr 1st, 2024
33
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 6.51 KB | None | 0 0
  1. smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-18-amd64] (local build)
  2. Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate IronWolf
  6. Device Model: ST10000VN0008-2JJ101
  7. Serial Number: ZS50XRZN
  8. LU WWN Device Id: 5 000c50 0b133cef3
  9. Add. Product Id: DELL(tm)
  10. Firmware Version: TA23
  11. User Capacity: 10,000,831,348,736 bytes [10.0 TB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Rotation Rate: 7200 rpm
  14. Form Factor: 3.5 inches
  15. Device is: In smartctl database 7.3/5319
  16. ATA Version is: ACS-3 T13/2161-D revision 5
  17. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  18. Local Time is: Mon Apr 1 15:24:41 2024 BST
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART overall-health self-assessment test result: PASSED
  24.  
  25. General SMART Values:
  26. Offline data collection status: (0x82) Offline data collection activity
  27. was completed without error.
  28. Auto Offline Data Collection: Enabled.
  29. Self-test execution status: ( 0) The previous self-test routine completed
  30. without error or no self-test has ever
  31. been run.
  32. Total time to complete Offline
  33. data collection: ( 90) seconds.
  34. Offline data collection
  35. capabilities: (0x7b) SMART execute Offline immediate.
  36. Auto Offline data collection on/off support.
  37. Suspend Offline collection upon new
  38. command.
  39. Offline surface scan supported.
  40. Self-test supported.
  41. Conveyance Self-test supported.
  42. Selective Self-test supported.
  43. SMART capabilities: (0x0003) Saves SMART data before entering
  44. power-saving mode.
  45. Supports SMART auto save timer.
  46. Error logging capability: (0x01) Error logging supported.
  47. General Purpose Logging supported.
  48. Short self-test routine
  49. recommended polling time: ( 2) minutes.
  50. Extended self-test routine
  51. recommended polling time: ( 921) minutes.
  52. Conveyance self-test routine
  53. recommended polling time: ( 3) minutes.
  54. SCT capabilities: (0x70bd) SCT Status supported.
  55. SCT Error Recovery Control supported.
  56. SCT Feature Control supported.
  57. SCT Data Table supported.
  58.  
  59. SMART Attributes Data Structure revision number: 10
  60. Vendor Specific SMART Attributes with Thresholds:
  61. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  62. 1 Raw_Read_Error_Rate 0x010f 080 070 044 Pre-fail Always - 96899206
  63. 3 Spin_Up_Time 0x0103 093 093 000 Pre-fail Always - 0
  64. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 14
  65. 5 Reallocated_Sector_Ct 0x0133 100 100 010 Pre-fail Always - 0
  66. 7 Seek_Error_Rate 0x000f 071 060 045 Pre-fail Always - 12664547
  67. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 37 (9 204 0)
  68. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  69. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 14
  70. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  71. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  72. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
  73. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  74. 190 Airflow_Temperature_Cel 0x0022 066 054 040 Old_age Always - 34 (Min/Max 33/34)
  75. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1
  76. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 10
  77. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 15
  78. 194 Temperature_Celsius 0x0022 034 046 000 Old_age Always - 34 (0 21 0 0 0)
  79. 195 Hardware_ECC_Recovered 0x001a 080 070 000 Old_age Always - 96899206
  80. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  81. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  82. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  83. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  84. 200 Pressure_Limit 0x0023 100 100 001 Pre-fail Always - 0
  85. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 35h+57m+50.390s
  86. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 209984059
  87. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 137178118
  88.  
  89. SMART Error Log Version: 1
  90. No Errors Logged
  91.  
  92. SMART Self-test log structure revision number 1
  93. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  94. # 1 Extended offline Completed without error 00% 19 -
  95. # 2 Short offline Completed without error 00% 4 -
  96. # 3 Short offline Completed without error 00% 4 -
  97. # 4 Extended offline Aborted by host 90% 4 -
  98. # 5 Short offline Completed without error 00% 1 -
  99.  
  100. SMART Selective self-test log data structure revision number 1
  101. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  102. 1 0 0 Not_testing
  103. 2 0 0 Not_testing
  104. 3 0 0 Not_testing
  105. 4 0 0 Not_testing
  106. 5 0 0 Not_testing
  107. Selective self-test flags (0x0):
  108. After scanning selected spans, do NOT read-scan remainder of disk.
  109. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement