Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ---<<BOOT>>---
- KDB: debugger backends: ddb
- KDB: current backend: ddb
- Copyright (c) 1992-2020 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 13.0-CURRENT #98 r357147:357497M: Fri Feb 7 14:30:10 +08 2020
- tsgan@beastie.mstride.com:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
- FreeBSD clang version 9.0.0 (tags/RELEASE_900/final 372316) (based on LLVM 9.0.0)
- WARNING: WITNESS option enabled, expect reduced performance.
- VT: init without driver.
- module firmware already present!
- KLD file umodem.ko is missing dependencies
- Starting CPU 1 (1)
- Starting CPU 2 (2)
- Starting CPU 3 (3)
- FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
- random: unblocking device.
- random: entropy device external interface
- MAP 3cefc000 mode 2 pages 1
- MAP 3ffa4000 mode 2 pages 1
- WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
- kbd0 at kbdmux0
- WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
- ofwbus0: <Open Firmware Device Tree>
- simplebus0: <Flattened device tree simple bus> on ofwbus0
- clk_fixed0: <Fixed clock> on ofwbus0
- rk_grf0: <RockChip General Register Files> mem 0xff100000-0xff100fff on ofwbus0
- rk3328_cru0: <Rockchip RK3328 Clock and Reset Unit> mem 0xff440000-0xff440fff on ofwbus0
- rk3328_cru0: cannot get parent at idx 6
- Cannot set frequency for clk: aclk_bus_pre, error: 34
- rk3328_cru0: Failed to set aclk_bus_pre to a frequency of 15000000
- Cannot set frequency for clk: aclk_peri_pre, error: 34
- rk3328_cru0: Failed to set aclk_peri_pre to a frequency of 15000000
- clk_fixed1: <Fixed clock> on ofwbus0
- regfix0: <Fixed Regulator> on ofwbus0
- regfix1: <Fixed Regulator> on ofwbus0
- regfix2: <Fixed Regulator> on ofwbus0
- regfix3: <Fixed Regulator> on ofwbus0
- simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff450000-0xff45ffff on ofwbus0
- psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
- gic0: <ARM Generic Interrupt Controller> mem 0xff811000-0xff811fff,0xff812000-0xff813fff,0xff814000-0xff815fff,0xff816000-0xff817fff irq 50 on ofwbus0
- gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 160
- rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0
- gpio0: <RockChip GPIO Bank controller> mem 0xff210000-0xff2100ff irq 53 on rk_pinctrl0
- gpiobus0: <OFW GPIO bus> on gpio0
- gpio1: <RockChip GPIO Bank controller> mem 0xff220000-0xff2200ff irq 54 on rk_pinctrl0
- gpiobus1: <OFW GPIO bus> on gpio1
- gpio2: <RockChip GPIO Bank controller> mem 0xff230000-0xff2300ff irq 55 on rk_pinctrl0
- gpiobus2: <OFW GPIO bus> on gpio2
- gpio3: <RockChip GPIO Bank controller> mem 0xff240000-0xff2400ff irq 56 on rk_pinctrl0
- gpiobus3: <OFW GPIO bus> on gpio3
- rk_i2c0: <RockChip I2C> mem 0xff160000-0xff160fff irq 16 on ofwbus0
- iicbus0: <OFW I2C bus> on rk_i2c0
- rk805_pmu0: <RockChip RK805 PMIC> at addr 0x30 irq 57 on iicbus0
- generic_timer0: <ARMv8 Generic Timer> irq 4,5,6,7 on ofwbus0
- Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
- Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
- rk_tsadc0: <RockChip temperature sensors> mem 0xff250000-0xff2500ff irq 22 on ofwbus0
- cpulist0: <Open Firmware CPU Group> on ofwbus0
- cpu0: <Open Firmware CPU> on cpulist0
- cpufreq_dt0: <Generic cpufreq driver> on cpu0
- cpu1: <Open Firmware CPU> on cpulist0
- cpufreq_dt1: <Generic cpufreq driver> on cpu1
- cpu2: <Open Firmware CPU> on cpulist0
- cpufreq_dt2: <Generic cpufreq driver> on cpu2
- cpu3: <Open Firmware CPU> on cpulist0
- cpufreq_dt3: <Generic cpufreq driver> on cpu3
- uart0: <16750 or compatible> mem 0xff130000-0xff1300ff irq 14 on ofwbus0
- uart0: console (-1,n,8,1)
- iic0: <I2C generic I/O> on iicbus0
- syscon_generic0: <syscon> mem 0xff460000-0xff460fff on ofwbus0
- rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xff500000-0xff503fff irq 42 on ofwbus0
- rockchip_dwmmc0: Hardware version ID is 270a
- mmc0: <MMC/SD bus> on rockchip_dwmmc0
- rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xff520000-0xff523fff irq 44 on ofwbus0
- rockchip_dwmmc1: Hardware version ID is 270a
- mmc1: <MMC/SD bus> on rockchip_dwmmc1
- dwc0: <Rockchip Gigabit Ethernet Controller> mem 0xff540000-0xff54ffff irq 45 on ofwbus0
- miibus0: <MII bus> on dwc0
- rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
- rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
- rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
- rgephy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
- dwc0: Ethernet address: 26:ea:f4:83:98:8a
- dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0xff580000-0xff5bffff irq 47 on ofwbus0
- usbus0 on dwcotg0
- ehci0: <Generic EHCI Controller> mem 0xff5c0000-0xff5cffff irq 48 on ofwbus0
- usbus1: EHCI version 1.0
- usbus1 on ehci0
- ohci0: <Generic OHCI Controller> mem 0xff5d0000-0xff5dffff irq 49 on ofwbus0
- usbus2 on ohci0
- rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0
- xhci0: <Synopsys Designware DWC3> mem 0xff600000-0xff6fffff irq 58 on rk_dwc30
- xhci0: 64 bytes context size, 32-bit DMA
- usbus3: trying to attach
- usbus3 on xhci0
- gpioc0: <GPIO controller> on gpio0
- gpioc1: <GPIO controller> on gpio1
- gpioc2: <GPIO controller> on gpio2
- gpioc3: <GPIO controller> on gpio3
- gpioled0: <GPIO LEDs> on ofwbus0
- gpioled0: <power> failed to map pin
- gpioled0: <standby> failed to map pin
- cryptosoft0: <software crypto>
- Timecounters tick every 1.000 msec
- usbus0: 480Mbps High Speed USB v2.0
- usbus1: 480Mbps High Speed USB v2.0
- usbus2: 12Mbps Full Speed USB v1.0
- usbus3: 5.0Gbps Super Speed USB v3.0
- Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
- ugen2.1: <Generic OHCI root HUB> at usbus2
- uhub0 on usbus2
- uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
- ugen1.1: <Generic EHCI root HUB> at usbus1
- uhub1 on usbus1
- uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
- ugen0.1: <DWCOTG OTG Root HUB> at usbus0
- uhub2 on usbus0
- uhub2: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
- ugen3.1: <Synopsys XHCI root HUB> at usbus3
- uhub3 on usbus3
- uhub3: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3
- mmcsd0: 16GB <SDHC USDU1 2.0 SN 425D7DE9 MFG 01/2018 by 116 J`> at mmc0 50.0MHz/4bit/256-block
- cmd err 0x00000100 cmd 0x00000008
- cmd err 0x00000100 cmd 0x00000008
- cmd err 0x00000100 cmd 0x00000008
- cmd err 0x00000100 cmd 0x00000008
- cmd err 0x00000100 cmd 0x00000037
- cmd err 0x00000100 cmd 0x00000037
- cmd err 0x00000100 cmd 0x00000037
- cmd err 0x00000100 cmd 0x00000037
- cmd err 0x00000100 cmd 0x00000001
- cmd err 0x00000100 cmd 0x00000001
- cmd err 0x00000100 cmd 0x00000001
- cmd err 0x00000100 cmd 0x00000001
- mmc1: No compatible cards found on bus
- Release APs...done
- CPU 0: ARM Cortex-A53 r0p4 affinity: 0
- Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
- Instruction Set Attributes 1 = <>
- Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
- Processor Features 1 = <>
- Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
- Memory Model Features 1 = <8bit VMID>
- Memory Model Features 2 = <32bit CCIDX,48bit VA>
- Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
- Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
- Debug Features 1 = <>
- Auxiliary Features 0 = <>
- Auxiliary Features 1 = <>
- CPU 1: ARM Cortex-A53 r0p4 affinity: 1
- CPU 2: ARM Cortex-A53 r0p4 affinity: 2
- CPU 3: ARM Cortex-A53 r0p4 affinity: 3
- WARNING: WITNESS option enabled, expect reduced performance.
- Warning: no time-of-day clock registered, system time will not be set accurately
- uhub0: 1 port with 1 removable, self powered
- uhub3: 2 ports with 2 removable, self powered
- uhub2: 1 port with 1 removable, self powered
- uhub1: 1 port with 1 removable, self powered
- ugen3.2: <Realtek USB 10/100/1000 LAN> at usbus3
- ugen1.2: <Realtek 802.11n WLAN Adapter> at usbus1
- lo0: link state changed to UP
- dwc0: link state changed to DOWN
- dwc0: link state changed to UP
- ure0 on uhub3
- ure0: <Realtek USB 10/100/1000 LAN, class 0/0, rev 3.00/31.00, addr 1> on usbus3
- ure0: unknown version 0x0000
- rtwn0 on uhub1
- rtwn0: <Realtek 802.11n WLAN Adapter, class 0/0, rev 2.00/2.00, addr 2> on usbus1
- rtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
- ure0: timeout waiting for chip autoload
- ure0: timeout waiting for phy to stabilize
- ure0: timeout waiting for phy to stabilize
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement