API tools faq
paste
Advertisement
prokiller1199

Untitled

prokiller1199
Aug 12th, 2022
36
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 44.88 KB | None | 0 0
raw download clone embed print report
  1. ASUSWRT-Merlin RT-AC86U 386.3_2 Fri Aug 6 21:48:26 UTC 2021
  2. admin@RT-AC86U-4358:/tmp/home/root# dmesg
  3. Booting Linux on physical CPU 0x0
  4. Linux version 4.1.27 (merlin@ubuntu-dev) (gcc version 5.3.0 (Buildroot 2016.02) ) #2 SMP PREEMPT Fri Aug 6 18:32:35 EDT 2021
  5. CPU: AArch64 Processor [420f1000] revision 0
  6. Detected VIPT I-cache on CPU0
  7. alternatives: enabling workaround for ARM erratum 845719
  8. On node 0 totalpages: 123904
  9. DMA zone: 1792 pages used for memmap
  10. DMA zone: 0 pages reserved
  11. DMA zone: 123904 pages, LIFO batch:31
  12. PERCPU: Embedded 15 pages/cpu @ffffffc01ffd6000 s21376 r8192 d31872 u61440
  13. pcpu-alloc: s21376 r8192 d31872 u61440 alloc=15*4096
  14. pcpu-alloc: [0] 0 [0] 1
  15. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 122112
  16. Kernel command line: coherent_pool=1M cpuidle_sysfs_switch
  17. PID hash table entries: 2048 (order: 2, 16384 bytes)
  18. Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
  19. Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
  20. Memory: 440096K/495616K available (4714K kernel code, 302K rwdata, 1580K rodata, 228K init, 534K bss, 55520K reserved, 0K cma-reserved)
  21. Virtual kernel memory layout:
  22. vmalloc : 0xffffff8000000000 - 0xffffffbdffff0000 ( 247 GB)
  23. vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000 ( 7 GB maximum)
  24. 0xffffffbe00000000 - 0xffffffbe00700000 ( 7 MB actual)
  25. fixed : 0xffffffbffabfd000 - 0xffffffbffac00000 ( 12 KB)
  26. PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
  27. modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  28. memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB)
  29. .init : 0xffffffc0006a7000 - 0xffffffc0006e0000 ( 228 KB)
  30. .text : 0xffffffc000080000 - 0xffffffc0006a6274 ( 6297 KB)
  31. .data : 0xffffffc0006e1000 - 0xffffffc00072cbc0 ( 303 KB)
  32. Preemptible hierarchical RCU implementation.
  33. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  34. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  35. NR_IRQS:64 nr_irqs:64 0
  36. Architected cp15 timer(s) running at 50.00MHz (phys).
  37. clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, ma x_idle_ns: 440795202655 ns
  38. sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
  39. BRCM Legacy Drivers' Helper, all legacy drivers' IO memories/interrupts should b e remapped here
  40. Remapping interrupts...
  41. hwirq virq
  42. 61 5
  43. 64 6
  44. 66 7
  45. 91 8
  46. 92 9
  47. 93 10
  48. 77 11
  49. 78 12
  50. 79 13
  51. 80 14
  52. 81 15
  53. 82 16
  54. 83 17
  55. 84 18
  56. 85 19
  57. 86 20
  58. 88 21
  59. 96 22
  60. 97 23
  61. 98 24
  62. 99 25
  63. 118 26
  64. 119 27
  65. 106 28
  66. 104 29
  67. 105 30
  68. 76 31
  69. 120 32
  70. 110 33
  71. 148 34
  72. 154 35
  73. 155 36
  74. 156 37
  75. 157 38
  76. 158 39
  77. 159 40
  78. 69 41
  79. Remapping IO memories...
  80. phys virt size
  81. 00000000ff800000 ffffff8000008000 00003000
  82. 00000000ff858000 ffffff8000002000 00001000
  83. 00000000ff85a000 ffffff800000c000 00001000
  84. 00000000ffe00000 ffffff8000040000 00020000
  85. 0000000080002000 ffffff800000e000 00001000
  86. 0000000080018000 ffffff8000010000 00004000
  87. 0000000080200000 ffffff8000018000 00005000
  88. 0000000080280000 ffffff8000016000 00001000
  89. 0000000082200000 ffffff8000080000 00100000
  90. 0000000080080000 ffffff8000200000 00050000
  91. 0000000080008000 ffffff8000020000 00003fff
  92. 000000008000c000 ffffff8000028000 00003fff
  93. 0000000081060000 ffffff8000030000 00004000
  94. 0000000080100000 ffffff8000038000 00002000
  95. 0000000080010000 ffffff800001e000 00001000
  96. 000000008001d000 ffffff800003c000 00001010
  97. 000000008001c000 ffffff8000026000 00000448
  98. console [ttyS0] enabled
  99. Calibrating delay loop (skipped), value calculated using timer frequency.. 100.0 0 BogoMIPS (lpj=500000)
  100. pid_max: default: 32768 minimum: 301
  101. Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
  102. Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
  103. --Kernel Config--
  104. SMP=1
  105. PREEMPT=1
  106. DEBUG_SPINLOCK=0
  107. DEBUG_MUTEXES=0
  108. Broadcom Logger v0.1
  109. creating mapping for reserved memory phys 0x0c400000 virt 0xffffffc00c400000 siz e 0x00e00000 for dhd1
  110. Do not need to create mapping for reserved memory phys 0x0e000000 size 0x0200000 0 for buffer
  111. creating mapping for reserved memory phys 0x0d200000 virt 0xffffffc00d200000 siz e 0x00e00000 for flow
  112. pmc_init:PMC using DQM mode
  113. CPU1: Booted secondary processor
  114. Detected VIPT I-cache on CPU1
  115. Brought up 2 CPUs
  116. SMP: Total of 2 processors activated.
  117. CPU: All CPU(s) started at EL2
  118. alternatives: patching kernel code
  119. devtmpfs: initialized
  120. clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112 604462750000 ns
  121. NET: Registered protocol family 16
  122. cpuidle: using governor ladder
  123. cpuidle: using governor menu
  124. vdso: 2 pages (1 code @ ffffffc0006e9000, 1 data @ ffffffc0006e8000)
  125. DMA: preallocated 1024 KiB pool for atomic allocations
  126. ACPI: Interpreter disabled.
  127. bcmhs_spi bcmhs_spi.1: master is unqueued, this is deprecated
  128. skbFreeTask created successfully
  129. gbpm_do_work scheduled
  130. BLOG v3.0 Initialized
  131. BLOG Rule v1.0 Initialized
  132. Broadcom IQoS v0.1 initialized
  133. Broadcom GBPM v0.1 initialized
  134. Switched to clocksource arch_sys_counter
  135. pnp: PnP ACPI: disabled
  136. NET: Registered protocol family 2
  137. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  138. TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
  139. TCP: Hash tables configured (established 4096 bind 4096)
  140. UDP hash table entries: 256 (order: 1, 8192 bytes)
  141. UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  142. NET: Registered protocol family 1
  143. PCI: CLS 0 bytes, default 64
  144. futex hash table entries: 512 (order: 3, 32768 bytes)
  145. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  146. jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  147. fuse init (API version 7.23)
  148. io scheduler noop registered (default)
  149. brd: module loaded
  150. loop: module loaded
  151. nand: Could not find valid ONFI parameter page; aborting
  152. nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
  153. nand: Macronix NAND 256MiB 3,3V 8-bit
  154. nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  155. bcm63xx_nand ff801800.nand: Adjust timing_1 to 0x65324458 timing_2 to 0x80040e54
  156. bcm63xx_nand ff801800.nand: detected 256MiB total, 128KiB blocks, 2KiB pages, 16 B OOB, 8-bit, BCH-4
  157. Bad block table found at page 131008, version 0x01
  158. Bad block table found at page 130944, version 0x01
  159. nand_read_bbt: bad block at 0x000005f20000
  160. >>>>> For primary mtd partition rootfs, cferam/vmlinux.lz mounted as JFFS2, vmli nux fs mounted as UBIFS <<<<<
  161. Secondary mtd partition rootfs_update detected as JFFS2 for cferam/vmlinux sourc e and UBIFS for vmlinux filesystem
  162. setup_mtd_parts: misc indx 2 name misc3 nvram configured size 1
  163. setup_mtd_parts: name misc3 configured size 0x00100000 offset 0xF600000
  164. setup_mtd_parts: misc indx 1 name misc2 nvram configured size 47
  165. setup_mtd_parts: name misc2 configured size 0x02f00000 offset 0xC700000
  166. setup_mtd_parts: misc indx 0 name misc1 nvram configured size 8
  167. setup_mtd_parts: name misc1 configured size 0x00800000 offset 0xBF00000
  168. Creating 11 MTD partitions on "brcmnand.0":
  169. 0x000006460000-0x00000bf00000 : "rootfs"
  170. 0x000000560000-0x000006000000 : "rootfs_update"
  171. 0x00000f700000-0x00000ff00000 : "data"
  172. 0x000000000000-0x000000100000 : "nvram"
  173. 0x000000100000-0x000006000000 : "image_update"
  174. 0x000006000000-0x00000bf00000 : "image"
  175. 0x000006000000-0x000006460000 : "bootfs"
  176. 0x000000100000-0x000000560000 : "bootfs_update"
  177. 0x00000f600000-0x00000f700000 : "misc3"
  178. 0x00000c700000-0x00000f600000 : "misc2"
  179. 0x00000bf00000-0x00000c700000 : "misc1"
  180. IMQ driver loaded successfully. (numdevs = 3, numqueues = 1, imq_dev_accurate_st ats = 1)
  181. Hooking IMQ after NAT on PREROUTING.
  182. Hooking IMQ before NAT on POSTROUTING.
  183. PPP generic driver version 2.4.2
  184. PPP BSD Compression module registered
  185. PPP MPPE Compression module registered
  186. NET: Registered protocol family 24
  187. PPTP driver version 0.8.5
  188. i2c /dev entries driver
  189. bcm96xxx-wdt ff800428.watchdog: Broadcom BCM96xxx watchdog timer
  190. brcmboard registered
  191. brcmboard: brcm_board_init entry
  192. print_rst_status: Last RESET due to SW reset
  193. print_rst_status: RESET reason: 0x00000000
  194. DYING GASP IRQ Initialized and Enabled
  195. map_hw_timer_interrupt,132: interrupt_id 22
  196. map_hw_timer_interrupt,132: interrupt_id 23
  197. map_hw_timer_interrupt,132: interrupt_id 24
  198. map_hw_timer_interrupt,132: interrupt_id 25
  199. Registering button 0 (ffffffc0007676a0) (bpGpio: 00008017, bpExtIrq:00000000 (0) )
  200. extIrqIdx:0, gpioNum:23 ACTIVE LOW
  201. Registering button 1 (ffffffc000767760) (bpGpio: 00008016, bpExtIrq:00000001 (1) )
  202. extIrqIdx:1, gpioNum:22 ACTIVE LOW
  203. Registering button 2 (ffffffc000767820) (bpGpio: 0000800f, bpExtIrq:00000001 (1) )
  204. extIrqIdx:1, gpioNum:15 ACTIVE LOW
  205. genirq: Flags mismatch irq 36. 00000000 (brcm_36) vs. 00000000 (brcm_36)
  206. request_irq failed for irq=36 (brcm_36) retval=-16
  207. registerBtns: Button index 3 out of range (max 3)
  208. Serial: BCM63XX driver $Revision: 3.00 $
  209. Magic SysRq with Auxilliary trigger char enabled (type ^ h for list of supported commands)
  210. ttyS0 at MMIO 0xff800640 (irq = 6, base_baud = 921600) is a BCM63XX
  211. BPM: tot_mem_size=536870912B (512MB), buf_mem_size <15%> =80530635B (76MB), num of buffers=35951, buf size=2240
  212. Broadcom BPM Module Char Driver v0.1 Registered<3004>
  213. PCIe HCD (impl1)
  214. bcm963xx-pcie: found core [0] Rev [ 3. 4]
  215. bcm963xx-pcie bcm963xx-pcie.0: PCI host bridge to bus 0000:00
  216. pci_bus 0000:00: root bus resource [mem 0xc0000000-0xcfffffff]
  217. pci_bus 0000:00: root bus resource [bus 00-ff]
  218. pci 0000:00:00.0: [14e4:4906] type 01 class 0x060400
  219. pci 0000:00:00.0: PME# supported from D0 D3hot
  220. pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22
  221. pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  222. pci 0000:01:00.0: [14e4:4365] type 00 class 0x028000
  223. pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
  224. pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
  225. pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
  226. pci 0000:01:00.0: supports D1 D2
  227. pci 0000:01:00.0: of_irq_parse_pci() failed with rc=-22
  228. pci 0000:00:00.0: Checking PCIe ASPM for vendor 14e4 device 4365
  229. pci 0000:00:00.0: Disabling PCIe ASPM for vendor 14e4 device 4365
  230. pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  231. pci 0000:00:00.0: BAR 8: assigned [mem 0xc0000000-0xc0bfffff]
  232. pci 0000:00:00.0: BAR 9: assigned [mem 0xc0c00000-0xc0cfffff 64bit pref]
  233. pci 0000:01:00.0: BAR 2: assigned [mem 0xc0000000-0xc07fffff 64bit]
  234. pci 0000:01:00.0: BAR 4: assigned [mem 0xc0c00000-0xc0cfffff 64bit pref]
  235. pci 0000:01:00.0: BAR 0: assigned [mem 0xc0800000-0xc0807fff 64bit]
  236. pci 0000:00:00.0: PCI bridge to [bus 01]
  237. pci 0000:00:00.0: bridge window [mem 0xc0000000-0xc0bfffff]
  238. pci 0000:00:00.0: bridge window [mem 0xc0c00000-0xc0cfffff 64bit pref]
  239. pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  240. pcieport 0000:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
  241. pci 0000:01:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
  242. bcm963xx-pcie: found core [1] Rev [ 3. 4]
  243. bcm963xx-pcie bcm963xx-pcie.1: PCI host bridge to bus 0001:00
  244. pci_bus 0001:00: root bus resource [mem 0xd0000000-0xdfffffff]
  245. pci_bus 0001:00: root bus resource [bus 00-ff]
  246. pci 0001:00:00.0: [14e4:4906] type 01 class 0x060400
  247. pci 0001:00:00.0: PME# supported from D0 D3hot
  248. pci 0001:00:00.0: of_irq_parse_pci() failed with rc=-22
  249. pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  250. pci 0001:01:00.0: [14e4:4365] type 00 class 0x028000
  251. pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
  252. pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
  253. pci 0001:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
  254. pci 0001:01:00.0: supports D1 D2
  255. pci 0001:01:00.0: of_irq_parse_pci() failed with rc=-22
  256. pci 0001:00:00.0: Checking PCIe ASPM for vendor 14e4 device 4365
  257. pci 0001:00:00.0: Disabling PCIe ASPM for vendor 14e4 device 4365
  258. pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
  259. pci 0001:00:00.0: BAR 8: assigned [mem 0xd0000000-0xd0bfffff]
  260. pci 0001:00:00.0: BAR 9: assigned [mem 0xd0c00000-0xd0cfffff 64bit pref]
  261. pci 0001:01:00.0: BAR 2: assigned [mem 0xd0000000-0xd07fffff 64bit]
  262. pci 0001:01:00.0: BAR 4: assigned [mem 0xd0c00000-0xd0cfffff 64bit pref]
  263. pci 0001:01:00.0: BAR 0: assigned [mem 0xd0800000-0xd0807fff 64bit]
  264. pci 0001:00:00.0: PCI bridge to [bus 01]
  265. pci 0001:00:00.0: bridge window [mem 0xd0000000-0xd0bfffff]
  266. pci 0001:00:00.0: bridge window [mem 0xd0c00000-0xd0cfffff 64bit pref]
  267. pcieport 0001:00:00.0: enabling device (0000 -> 0002)
  268. pcieport 0001:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
  269. pci 0001:01:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
  270. bcm963xx-pcie: found core [2] Rev [ 3. 4]
  271. bcm963xx-pcie: failed to bring up core [2] link
  272. GACT probability NOT on
  273. Mirror/redirect action on
  274. u32 classifier
  275. Performance counters on
  276. input device check on
  277. Actions configured
  278. Netfilter messages via NETLINK v0.30.
  279. nf_conntrack version 0.5.0 (3438 buckets, 13752 max)
  280. ctnetlink v0.93: registering with nfnetlink.
  281. xt_time: kernel timezone is -0000
  282. gre: GRE over IPv4 demultiplexor driver
  283. ip_tables: (C) 2000-2006 Netfilter Core Team
  284. NET: Registered protocol family 10
  285. ip6_tables: (C) 2000-2006 Netfilter Core Team
  286. sit: IPv6 over IPv4 tunneling driver
  287. NET: Registered protocol family 17
  288. NET: Registered protocol family 15
  289. bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update you r scripts to load br_netfilter if you need this.
  290. L2TP core: blog_l2tp_rcv_check
  291. l2tp_core: L2TP core driver, V2.0
  292. l2tp_ppp: PPPoL2TP kernel driver, V2.0
  293. 8021q: 802.1Q VLAN Support v1.8
  294. ubi0: attaching mtd0
  295. ubi0: scanning is finished
  296. ubi0: attached mtd0 (name "rootfs", size 90 MiB)
  297. ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  298. ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  299. ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  300. ubi0: good PEBs: 725, bad PEBs: 0, corrupted PEBs: 0
  301. ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
  302. ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 0
  303. ubi0: available PEBs: 0, total reserved PEBs: 725, PEBs reserved for bad PEB han dling: 15
  304. ubi0: background thread "ubi_bgt0d" started, PID 60
  305. UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs_ubifs", R/O mode
  306. UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  307. UBIFS (ubi0:0): FS size: 88248320 bytes (84 MiB, 695 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
  308. UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
  309. UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID C8567AA4-57AA-4D5E-A E46-3AD9FCB617B3, small LPT model
  310. VFS: Mounted root (ubifs filesystem) readonly on device 0:12.
  311. devtmpfs: mounted
  312. Freeing unused kernel memory: 228K (ffffffc0006a7000 - ffffffc0006e0000)
  313. wlcsm: module license 'Proprietary' taints kernel.
  314. Disabling lock debugging due to kernel taint
  315. Initializing WLCSM Module
  316. WLCSM Module loaded successfully
  317. FPM will initialize 2 pool[s] and require 32 MB
  318. bcm-fpm: FPM with 2 pool(s)
  319. bm_base_addr 0xffffffc00e000000, size 33554432, bm_base_addr_phys 0x000000000e00 0000
  320. fm_base_addr 0xffffffc00d200000, size 14680064, fm_base_addr_phys 0x000000000d20 0000
  321. Scratch pad is not initialized.
  322. RDP Physical address=0x82200000 Virtual address = 0xffffff8000780000
  323. configure_runner: NATC keysize 0x100070 key element size 16 contextsize 0x102000 context element size 64
  324. ++++Runner gso_desc_pool created successfully
  325. rdd_init_params.runner_nat_cache_key_ptr=0xffffffc00d900000
  326. FPM_BPM phy_addr 0x82c30000,virt_addr 0xffffff80003de000
  327.  
  328. RDP PKT memory = 32MB : Max Possible Bufs <16384> of size <2048>; Allocating <1 5360> bufs; RDP enum <5>
  329. brcmchipinfo: brcm_chipinfo_init entry
  330. NBUFF v1.0 Initialized
  331. Initialized fcache state
  332. Broadcom Packet Flow Cache Char Driver v4.0 Registered<3002>
  333. Created Proc FS /procfs/fcache
  334. Broadcom Packet Flow Cache registered with netdev chain
  335. Broadcom Packet Flow Cache learning via BLOG enabled.
  336. [FHW] pktDbgLvl[0xffffffbffc2a8648]=0
  337. [FHW] fhw_construct:
  338. Initialized Fcache HW accelerator layer state
  339. flwStatsThread created
  340. Constructed Broadcom Packet Flow Cache v4.0
  341. Runner Port#3 (Internal MUX Port#1) connects to Crossbar Port#1
  342. Unused MUX Internal Port#0 connects to Crossbar External Port#0
  343. Cross Bar MUX Config : Internal Port 00 maps to External Port 00 <reg_val : 0x00 000000>
  344. Cross Bar MUX Config : Internal Port 01 maps to External Port 01 <reg_val : 0x00 000004>
  345. Broadcom BCM4906_A0 Ethernet Network Device v0.1
  346. dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
  347. Scratch pad is not initialized.
  348. ++++ disabling GSO on logical_port=3 dev=eth0
  349. eth0: <Int sw port: 3> <Logical : 03> MAC : 0C:9D:92:4C:43:58
  350. Chip Physical Port 10, Cross Bar Port 1, PHY_ID <0x0007f00c:0x0c:Internal PH Y >
  351. eth1: <Ext sw port: 0> <Logical : 08> PHY_ID <0x0007f008:0x08:Internal PHY> MAC: 0C:9D:92:4C:43:58
  352. eth2: <Ext sw port: 1> <Logical : 09> PHY_ID <0x0007f009:0x09:Internal PHY> MAC: 0C:9D:92:4C:43:58
  353. eth3: <Ext sw port: 2> <Logical : 10> PHY_ID <0x0007f00a:0x0a:Internal PHY> MAC: 0C:9D:92:4C:43:58
  354. eth4: <Ext sw port: 3> <Logical : 11> PHY_ID <0x0007f00b:0x0b:Internal PHY> MAC: 0C:9D:92:4C:43:58
  355. NOTE: Using Port Grouping for IMP ports : [ 0 --> 4 ] [ 1, 2 --> 5 ] [ 3 --> 8 ]
  356. Ethernet Auto Power Down and Sleep: Enabled
  357. Cross bar port 1 of Int switch port 3; Adv capability change : MII=0x01e1, GMII= 0x0f00
  358. Ext switch port 0; Adv capability change : MII=0x01e1, GMII=0x0f00
  359. Ext switch port 1; Adv capability change : MII=0x01e1, GMII=0x0f00
  360. Ext switch port 2; Adv capability change : MII=0x01e1, GMII=0x0f00
  361. Ext switch port 3; Adv capability change : MII=0x01e1, GMII=0x0f00
  362. All Port Bit Map: 0x0f08: eth0,eth1,eth2,eth3,eth4
  363. Chip WAN Only Ports 0008, Defined WAN Only Ports 0000, WAN Only Port Result: 0x0008:eth0
  364. Chip WAN Preffered Ports 0000, Defined WAN Preffered Ports 0000, WAN Preffere d Port Result: 0x0000:
  365. Chip LAN Only Ports 0f00, Defined LAN Only Ports 0000, LAN Only Port Result: 0x0f00:eth1,eth2,eth3,eth4
  366. WAN/LAN Both Capable Ports 0x0000:
  367. Creating Enet CPU ring for queue number 1 with 512 packets,Descriptor base=fffff f800025d000, physical=0x1ea0c000
  368. Creating Enet CPU ring for queue number 0 with 512 packets,Descriptor base=ffff ff8000261000, physical=0x1ea10000
  369. ===> Activate Deep Green Mode
  370. Initialized Runner Unicast Layer
  371. Initialized Runner Multicast Layer
  372. Broadcom Packet Flow Cache HW acceleration enabled.
  373. Enabled Runner binding to Flow Cache
  374. Initialized Runner Protocol Layer (800)
  375. Broadcom Runner Blog Driver Char Driver v0.1 Registered <3009>
  376. NComm TMS V6.85 Kernel Module loaded.
  377. Wifi Forwarding Driver is initialized!
  378. Broadcom 802.1Q VLAN Interface, v0.1
  379. bcmspu: loading driver
  380. broadcomThermalDrv brcm-therm: init (CPU count 2 2 2 2)
  381. RDPA DS WAN UDP Filter Command Driver
  382. Ethernet Auto Power Down and Sleep: Enabled
  383. Energy Efficient Ethernet: Disabled
  384. ubi1: attaching mtd10
  385. ubi1: scanning is finished
  386. ubi1: attached mtd10 (name "misc1", size 8 MiB)
  387. ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  388. ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  389. ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
  390. ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
  391. ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
  392. ubi1: max/mean erase counter: 36/16, WL threshold: 4096, image sequence number: 113886647
  393. ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB hand ling: 4
  394. ubi1: background thread "ubi_bgt1d" started, PID 312
  395. eth3 (Ext switch port: 2) (Logical Port: 10) Link UP 1000 mbps full duplex
  396. UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram", R/O mode
  397. UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  398. UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 by tes (0 MiB, 6 LEBs)
  399. UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
  400. UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID DA02FFC9-330C-43B0-8 84B-CD262F788227, small LPT model
  401. UBIFS (ubi1:0): un-mount UBI device 1
  402. ubi1: detaching mtd10
  403. ubi1: mtd10 is detached
  404. init (1): drop_caches: 1
  405. Loading HND Module
  406. dpsta_init: Jun 12 2019 19:04:01 msglevel 0x1
  407. PCI_PROBE: bus 1, slot 0,vendor 14E4, device 4365(good PCI location)
  408. pcieh 0000:01:00.0: enabling device (0000 -> 0002)
  409. jffs2: notice: (359) check_node_data: wrong data CRC in data node at 0x0276e844: read 0x7abb5a21, calculated 0xfeb2c3f8.
  410. osl_pcie_mps_limit: MPS 512 MRR 512 devctl 0x102c50
  411. osl_pcie_mps_limit: override PCIE device MPS from 512 to 256
  412. osl_pcie_mps_limit: override PCIE RC MPS to 256
  413. Creating CPU ring for queue number 7 with 128 packets descriptor=0xffffffbffc253 0e0
  414. Done initializing Ring 7 Base=0xffffff8000258000 End=0xffffff8000258800 calcula ted entries= 128 RDD Base=0x1ea07000K descriptor=0xffffffbffc2530e0
  415. RDPA returned tx wakeup reg = <0x82299004>, val = <0x10000000>
  416. RDPA returned rx wakeup reg = <0x8229a004>, val = <0x28000000>
  417. eth3 (Ext switch port: 2) (Logical Port: 10) Link DOWN.
  418. ===> Activate Deep Green Mode
  419. Scratch pad is not initialized.
  420. dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
  421. dhd_attach(): thread:dhd_watchdog_thread:215 started
  422. Creating CPU ring for queue number 0 with 1024 packets descriptor=0xffffffbffc46 fcb8
  423. Creating CPU ring for queue number 1 with 1024 packets descriptor=0xffffffbffc4 6fce8
  424. wfd_bind: Dev eth%d wfd_idx 0 wl_radio_idx 0 Type fkb configured WFD thread wf d0-thrd minQId/maxQId (8/9), status (0) qmask 0x3
  425. Instantiating WFD 0 thread
  426. Scratch pad is not initialized.
  427. Scratch pad is not initialized.
  428. Scratch pad is not initialized.
  429. Scratch pad is not initialized.
  430. dhd_runner_profile_init: N+M profile = 3 01:1024 -1:2048 -1:1024 -1:0512 00:0512
  431. Scratch pad is not initialized.
  432. dhd_runner_policy_init: N+M Policy = 0 1 (HW)
  433. Runner DHD PCIE: vendor<0x14e4> device<0x4365> bus<1> slot<0>
  434. Initial configuration
  435. =================================
  436. rx_post_flow_ring_base_addr : ffffffc017140000
  437. tx_post_flow_ring_base_addr : (null)
  438. rx_complete_flow_ring_base_addr : ffffffc017188000
  439. tx_complete_flow_ring_base_addr : (null)
  440.  
  441. r2d_wr_arr_base_addr : ffffff8001239000
  442. d2r_rd_arr_base_addr : ffffff8001239402
  443. r2d_rd_arr_base_addr : ffffff8001239c00
  444. d2r_wr_arr_base_addr : ffffff8001239802
  445. tx_post_mgmt_arr_base_addr : ffffff800123a000
  446. tx_post_mgmt_arr_base_phys_addr : 0x17169000
  447.  
  448. r2d_wr_arr_base_phys_addr : 0x17168000
  449. d2r_rd_arr_base_phys_addr : 0x17168402
  450. r2d_rd_arr_base_phys_addr : 0x17168c00
  451. d2r_wr_arr_base_phys_addr : 0x17168802
  452.  
  453. Doorbell ISR : ffffffbffc534278
  454. Doorbell CTX : ffffffc01713d800
  455. Runner DHD Offload initialization complete
  456. Dongle Host Driver, version 1.363.45.84015 (r676423)
  457. Compiled in drivers/net/wireless/bcmdhd on May 18 2021 at 16:57:57
  458. wfd_registerdevice Successfully registered dev eth5 ifidx 0 wfd_idx 0
  459. Register interface [eth5] MAC: 0c:9d:92:4c:43:59
  460.  
  461. PCI_PROBE: bus 1, slot 0,vendor 14E4, device 4365(good PCI location)
  462. pcieh 0001:01:00.0: enabling device (0000 -> 0002)
  463. random: nonblocking pool is initialized
  464. osl_pcie_mps_limit: MPS 512 MRR 512 devctl 0x102c50
  465. osl_pcie_mps_limit: override PCIE device MPS from 512 to 256
  466. osl_pcie_mps_limit: override PCIE RC MPS to 256
  467. Creating CPU ring for queue number 1 with 128 packets descriptor=0xffffffbffc252 de0
  468. Done initializing Ring 1 Base=0xffffff800025c000 End=0xffffff800025c800 calcula ted entries= 128 RDD Base=0x1ea0b000K descriptor=0xffffffbffc252de0
  469. RDPA returned tx wakeup reg = <0x82299004>, val = <0x11000000>
  470. RDPA returned rx wakeup reg = <0x8229a004>, val = <0x29000000>
  471. Scratch pad is not initialized.
  472. dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
  473. dhd_attach(): thread:dhd_watchdog_thread:21b started
  474. Creating CPU ring for queue number 2 with 1024 packets descriptor=0xffffffbffc46 fd18
  475. Creating CPU ring for queue number 3 with 1024 packets descriptor=0xffffffbffc4 6fd48
  476. wfd_bind: Dev eth%d wfd_idx 1 wl_radio_idx 1 Type fkb configured WFD thread wf d1-thrd minQId/maxQId (10/11), status (0) qmask 0xc
  477. Instantiating WFD 1 thread
  478. Scratch pad is not initialized.
  479. dhd_runner_profile_init: N+M profile = 3 01:1024 -1:2048 -1:1024 -1:0512 00:0512
  480. Scratch pad is not initialized.
  481. dhd_runner_policy_init: N+M Policy = 0 1 (HW)
  482. Runner DHD PCIE: vendor<0x14e4> device<0x4365> bus<1> slot<0>
  483. Initial configuration
  484. =================================
  485. rx_post_flow_ring_base_addr : ffffffc015648000
  486. tx_post_flow_ring_base_addr : ffffffc00c3c4000
  487. rx_complete_flow_ring_base_addr : ffffffc015650000
  488. tx_complete_flow_ring_base_addr : ffffffc017254000
  489.  
  490. r2d_wr_arr_base_addr : ffffff8001259000
  491. d2r_rd_arr_base_addr : ffffff8001259402
  492. r2d_rd_arr_base_addr : ffffff8001259c00
  493. d2r_wr_arr_base_addr : ffffff8001259802
  494. tx_post_mgmt_arr_base_addr : ffffff800125a000
  495. tx_post_mgmt_arr_base_phys_addr : 0x171bd000
  496.  
  497. r2d_wr_arr_base_phys_addr : 0x171bc000
  498. d2r_rd_arr_base_phys_addr : 0x171bc402
  499. r2d_rd_arr_base_phys_addr : 0x171bcc00
  500. d2r_wr_arr_base_phys_addr : 0x171bc802
  501.  
  502. Doorbell ISR : ffffffbffc534278
  503. Doorbell CTX : ffffffc0171b4400
  504. Runner DHD Offload initialization complete
  505. Dongle Host Driver, version 1.363.45.84015 (r676423)
  506. Compiled in drivers/net/wireless/bcmdhd on May 18 2021 at 16:57:57
  507. wfd_registerdevice Successfully registered dev eth6 ifidx 0 wfd_idx 1
  508. Register interface [eth6] MAC: 0c:9d:92:4c:43:5c
  509.  
  510. ubi1: attaching mtd10
  511. ubi1: scanning is finished
  512. ubi1: attached mtd10 (name "misc1", size 8 MiB)
  513. ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  514. ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  515. ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
  516. ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
  517. ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
  518. ubi1: max/mean erase counter: 36/16, WL threshold: 4096, image sequence number: 113886647
  519. ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB hand ling: 4
  520. ubi1: background thread "ubi_bgt1d" started, PID 804
  521. eth0 (Int switch port: 3) (Logical Port: 3) Link UP 1000 mbps full duplex
  522. UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 821
  523. UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram"
  524. UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  525. UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 by tes (0 MiB, 6 LEBs)
  526. UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
  527. eth3 (Ext switch port: 2) (Logical Port: 10) Link UP 1000 mbps full duplex
  528. UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID DA02FFC9-330C-43B0-8 84B-CD262F788227, small LPT model
  529. UBIFS (ubi1:0): un-mount UBI device 1
  530. UBIFS (ubi1:0): background thread "ubifs_bgt1_0" stops
  531. ubi1: detaching mtd10
  532. ubi1: mtd10 is detached
  533. ubi1: attaching mtd10
  534. ubi1: scanning is finished
  535. ubi1: attached mtd10 (name "misc1", size 8 MiB)
  536. ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  537. ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  538. ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
  539. ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
  540. ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
  541. ubi1: max/mean erase counter: 36/16, WL threshold: 4096, image sequence number: 113886647
  542. ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB hand ling: 4
  543. ubi1: background thread "ubi_bgt1d" started, PID 870
  544. UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 885
  545. UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram"
  546. UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  547. UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 by tes (0 MiB, 6 LEBs)
  548. UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
  549. UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID DA02FFC9-330C-43B0-8 84B-CD262F788227, small LPT model
  550. UBIFS (ubi1:0): un-mount UBI device 1
  551. UBIFS (ubi1:0): background thread "ubifs_bgt1_0" stops
  552. ubi1: detaching mtd10
  553. ubi1: mtd10 is detached
  554. proc_dostring_crashlogsave: crash log filename is /jffs/crashlog.log
  555. crashFileSet: log signature invalid !
  556. ret 0 retlen 65536 buff
  557. usbcore: registered new interface driver usbfs
  558. usbcore: registered new interface driver hub
  559. usbcore: registered new device driver usb
  560. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  561. ehci-platform: EHCI generic platform driver
  562. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  563. ohci-platform: OHCI generic platform driver
  564. ++++ Powering up USB blocks
  565. usb3 reseting..........
  566.  
  567. release usb3 reseting..........
  568.  
  569. xhci-hcd xhci-hcd.0: xHCI Host Controller
  570. xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
  571. xhci-hcd xhci-hcd.0: hcc params 0x0250f17c hci version 0x100 quirks 0x00010010
  572. xhci-hcd xhci-hcd.0: irq 28, io mem 0x8000d000
  573. hub 1-0:1.0: USB hub found
  574. hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
  575. xhci-hcd xhci-hcd.0: xHCI Host Controller
  576. xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
  577. usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  578. hub 2-0:1.0: USB hub found
  579. hub 2-0:1.0: 2 ports detected
  580. ehci-platform ehci-platform.0: EHCI Host Controller
  581. ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 3
  582. ehci-platform ehci-platform.0: irq 30, io mem 0x8000c300
  583. ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
  584. hub 3-0:1.0: USB hub found
  585. hub 3-0:1.0: 2 ports detected
  586. ohci-platform ohci-platform.0: Generic Platform OHCI controller
  587. ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 4
  588. ohci-platform ohci-platform.0: irq 29, io mem 0x8000c400
  589. hub 4-0:1.0: USB hub found
  590. hub 4-0:1.0: 2 ports detected
  591. usbcore: registered new interface driver cdc_acm
  592. cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  593. usbcore: registered new interface driver asix
  594. usbcore: registered new interface driver ax88179_178a
  595. usbcore: registered new interface driver cdc_ether
  596. usbcore: registered new interface driver rndis_host
  597. usbcore: registered new interface driver cdc_ncm
  598. usbcore: registered new interface driver cdc_wdm
  599. usbcore: registered new interface driver qmi_wwan
  600. usbcore: registered new interface driver cdc_mbim
  601. [ERROR pktrunner] runnerUcast_inet6addr_event,202: Could not rdpa_ucast_ipv6_hos t_address_table_find
  602. No device name wl0.1 found in Ethernet driver
  603. No device name wl1.1 found in Ethernet driver
  604. device eth1 entered promiscuous mode
  605. device eth2 entered promiscuous mode
  606. device eth3 entered promiscuous mode
  607. device eth4 entered promiscuous mode
  608. wfd_registerdevice Successfully registered dev wl0.1 ifidx 1 wfd_idx 0
  609. Register interface [wl0.1] MAC: 0c:9d:92:4c:43:59
  610.  
  611. IGMP Query send failed
  612. wfd_registerdevice Successfully registered dev wl1.1 ifidx 1 wfd_idx 1
  613. Register interface [wl1.1] MAC: 0c:9d:92:4c:43:5c
  614.  
  615. IGMP Query send failed
  616. device wl0.1 entered promiscuous mode
  617. device wl1.1 entered promiscuous mode
  618. br0: port 6(wl1.1) entered forwarding state
  619. br0: port 6(wl1.1) entered forwarding state
  620. br0: port 5(wl0.1) entered forwarding state
  621. br0: port 5(wl0.1) entered forwarding state
  622. br0: port 3(eth3) entered forwarding state
  623. br0: port 3(eth3) entered forwarding state
  624. dpsta enabled, uif_bmap 0x3
  625. device eth0 entered promiscuous mode
  626. br0: port 7(eth0) entered forwarding state
  627. br0: port 7(eth0) entered forwarding state
  628. SCSI subsystem initialized
  629. usbcore: registered new interface driver usb-storage
  630. Tuxera FAT 12/16/32 driver version 3016.7.20 [Flags: R/W MODULE].
  631. Built against headers 4.1.27 #4 SMP PREEMPT Wed Jun 5 11:59:06 CST 2019 arm64
  632. Running on kernel 4.1.27 #2 SMP PREEMPT Fri Aug 6 18:32:35 EDT 2021 aarch64
  633. Tuxera NTFS driver 3018.6.22d [Flags: R/W MODULE].
  634. Built against headers 4.1.27 #4 SMP PREEMPT Wed Jun 5 11:59:06 CST 2019 arm64
  635. Running on kernel 4.1.27 #2 SMP PREEMPT Fri Aug 6 18:32:35 EDT 2021 aarch64
  636. Tuxera HFS+ driver 3017.6.20
  637. Built against headers 4.1.27 #4 SMP PREEMPT Wed Jun 5 11:59:06 CST 2019 arm64
  638. Running on kernel 4.1.27 #2 SMP PREEMPT Fri Aug 6 18:32:35 EDT 2021 aarch64
  639. init (1): drop_caches: 1
  640. device wl0.1 left promiscuous mode
  641. br0: port 5(wl0.1) entered disabled state
  642. device wl1.1 left promiscuous mode
  643. br0: port 6(wl1.1) entered disabled state
  644. device wl0.1 entered promiscuous mode
  645. br0: port 5(wl0.1) entered forwarding state
  646. br0: port 5(wl0.1) entered forwarding state
  647. device wl1.1 entered promiscuous mode
  648. br0: port 6(wl1.1) entered forwarding state
  649. br0: port 6(wl1.1) entered forwarding state
  650. dpsta enabled, uif_bmap 0x3
  651. br0: received packet on eth0 with own address as source address
  652. br0: received packet on eth0 with own address as source address
  653. br0: received packet on eth0 with own address as source address
  654. br0: received packet on eth0 with own address as source address
  655. device eth0 left promiscuous mode
  656. br0: port 7(eth0) entered disabled state
  657. br0: received packet on wl1.1 with own address as source address
  658. device eth0 entered promiscuous mode
  659. br0: port 7(eth0) entered forwarding state
  660. br0: port 7(eth0) entered forwarding state
  661. admin@RT-AC86U-4358:/tmp/home/root#
  662.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!