Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Encoder av1_nvenc [NVIDIA NVENC av1 encoder]:
- General capabilities: dr1 delay hardware
- Threading capabilities: none
- Supported hardware devices: cuda cuda d3d11va d3d11va
- Supported pixel formats: yuv420p nv12 p010le yuv444p p016le yuv444p16le bgr0 bgra rgb0 rgba x2rgb10le x2bgr10le gbrp gbrp16le cuda d3d11
- av1_nvenc AVOptions:
- -preset <int> E..V....... Set the encoding preset (from 0 to 18) (default p4)
- default 0 E..V.......
- slow 1 E..V....... hq 2 passes
- medium 2 E..V....... hq 1 pass
- fast 3 E..V....... hp 1 pass
- p1 12 E..V....... fastest (lowest quality)
- p2 13 E..V....... faster (lower quality)
- p3 14 E..V....... fast (low quality)
- p4 15 E..V....... medium (default)
- p5 16 E..V....... slow (good quality)
- p6 17 E..V....... slower (better quality)
- p7 18 E..V....... slowest (best quality)
- -tune <int> E..V....... Set the encoding tuning info (from 1 to 4) (default hq)
- hq 1 E..V....... High quality
- ll 2 E..V....... Low latency
- ull 3 E..V....... Ultra low latency
- lossless 4 E..V....... Lossless
- -level <int> E..V....... Set the encoding level restriction (from 0 to 24) (default auto)
- auto 24 E..V.......
- 2 0 E..V.......
- 2.0 0 E..V.......
- 2.1 1 E..V.......
- 2.2 2 E..V.......
- 2.3 3 E..V.......
- 3 4 E..V.......
- 3.0 4 E..V.......
- 3.1 5 E..V.......
- 3.2 6 E..V.......
- 3.3 7 E..V.......
- 4 8 E..V.......
- 4.0 8 E..V.......
- 4.1 9 E..V.......
- 4.2 10 E..V.......
- 4.3 11 E..V.......
- 5 12 E..V.......
- 5.0 12 E..V.......
- 5.1 13 E..V.......
- 5.2 14 E..V.......
- 5.3 15 E..V.......
- 6 16 E..V.......
- 6.0 16 E..V.......
- 6.1 17 E..V.......
- 6.2 18 E..V.......
- 6.3 19 E..V.......
- 7 20 E..V.......
- 7.0 20 E..V.......
- 7.1 21 E..V.......
- 7.2 22 E..V.......
- 7.3 23 E..V.......
- -tier <int> E..V....... Set the encoding tier (from 0 to 1) (default 0)
- 0 0 E..V.......
- 1 1 E..V.......
- -rc <int> E..V....... Override the preset rate-control (from -1 to INT_MAX) (default -1)
- constqp 0 E..V....... Constant QP mode
- vbr 1 E..V....... Variable bitrate mode
- cbr 2 E..V....... Constant bitrate mode
- -multipass <int> E..V....... Set the multipass encoding (from 0 to 2) (default disabled)
- disabled 0 E..V....... Single Pass
- qres 1 E..V....... Two Pass encoding is enabled where first Pass is quarter resolution
- fullres 2 E..V....... Two Pass encoding is enabled where first Pass is full resolution
- -highbitdepth <boolean> E..V....... Enable 10 bit encode for 8 bit input (default false)
- -tile-rows <int> E..V....... Number of tile rows to encode with (from -1 to 64) (default -1)
- -tile-columns <int> E..V....... Number of tile columns to encode with (from -1 to 64) (default -1)
- -surfaces <int> E..V....... Number of concurrent surfaces (from 0 to 64) (default 0)
- -gpu <int> E..V....... Selects which NVENC capable GPU to use. First GPU is 0, second is 1, and so on. (from -2 to INT_MAX) (default any)
- any -1 E..V....... Pick the first device available
- list -2 E..V....... List the available devices
- -rgb_mode <int> E..V....... Configure how nvenc handles packed RGB input. (from 0 to INT_MAX) (default yuv420)
- yuv420 1 E..V....... Convert to yuv420
- yuv444 2 E..V....... Convert to yuv444
- disabled 0 E..V....... Disables support, throws an error.
- -delay <int> E..V....... Delay frame output by the given amount of frames (from 0 to INT_MAX) (default INT_MAX)
- -rc-lookahead <int> E..V....... Number of frames to look ahead for rate-control (from 0 to INT_MAX) (default 0)
- -cq <float> E..V....... Set target quality level (0 to 63, 0 means automatic) for constant quality mode in VBR rate control (from 0 to 63) (default 0)
- -init_qpP <int> E..V....... Initial QP value for P frame (from -1 to 255) (default -1)
- -init_qpB <int> E..V....... Initial QP value for B frame (from -1 to 255) (default -1)
- -init_qpI <int> E..V....... Initial QP value for I frame (from -1 to 255) (default -1)
- -qp <int> E..V....... Constant quantization parameter rate control method (from -1 to 255) (default -1)
- -qp_cb_offset <int> E..V....... Quantization parameter offset for cb channel (from -12 to 12) (default 0)
- -qp_cr_offset <int> E..V....... Quantization parameter offset for cr channel (from -12 to 12) (default 0)
- -no-scenecut <boolean> E..V....... When lookahead is enabled, set this to 1 to disable adaptive I-frame insertion at scene cuts (default false)
- -forced-idr <boolean> E..V....... If forcing keyframes, force them as IDR frames. (default false)
- -b_adapt <boolean> E..V....... When lookahead is enabled, set this to 0 to disable adaptive B-frame decision (default true)
- -spatial-aq <boolean> E..V....... set to 1 to enable Spatial AQ (default false)
- -temporal-aq <boolean> E..V....... set to 1 to enable Temporal AQ (default false)
- -zerolatency <boolean> E..V....... Set 1 to indicate zero latency operation (no reordering delay) (default false)
- -nonref_p <boolean> E..V....... Set this to 1 to enable automatic insertion of non-reference P-frames (default false)
- -strict_gop <boolean> E..V....... Set 1 to minimize GOP-to-GOP rate fluctuations (default false)
- -aq-strength <int> E..V....... When Spatial AQ is enabled, this field is used to specify AQ strength. AQ strength scale is from 1 (low) - 15 (aggressive) (from 1 to 15) (default 8)
- -weighted_pred <boolean> E..V....... Enable weighted prediction (default false)
- -b_ref_mode <int> E..V....... Use B frames as references (from -1 to 2) (default -1)
- disabled 0 E..V....... B frames will not be used for reference
- each 1 E..V....... Each B frame will be used for reference
- middle 2 E..V....... Only (number of B frames)/2 will be used for reference
- -dpb_size <int> E..V....... Specifies the DPB size used for encoding (0 means automatic) (from 0 to INT_MAX) (default 0)
- -ldkfs <int> E..V....... Low delay key frame scale; Specifies the Scene Change frame size increase allowed in case of single frame VBV and CBR (from 0 to 255) (default 0)
- -intra-refresh <boolean> E..V....... Use Periodic Intra Refresh instead of IDR frames (default false)
- -timing-info <boolean> E..V....... Include timing info in sequence/frame headers (default false)
- -extra_sei <boolean> E..V....... Pass on extra SEI data (e.g. a53 cc) to be included in the bitstream (default true)
- -a53cc <boolean> E..V....... Use A53 Closed Captions (if available) (default true)
- -s12m_tc <boolean> E..V....... Use timecode (if available) (default true)
- -lookahead_level <int> E..V....... Specifies the lookahead level. Higher level may improve quality at the expense of performance. (from -1 to 15) (default -1)
- auto 15 E..V.......
- 0 0 E..V.......
- 1 1 E..V.......
- 2 2 E..V.......
- 3 3 E..V.......
- -split_encode_mode <int> E..V....... Specifies the split encoding mode (from 0 to 15) (default auto)
- disabled 15 E..V....... Disabled for all configurations
- auto 0 E..V....... Enabled or disabled depending on the preset and tuning info
- forced 1 E..V....... Enabled with number of horizontal strips selected by the driver
- 2 2 E..V....... Enabled with number of horizontal strips forced to 2 when number of NVENCs > 1
- 3 3 E..V....... Enabled with number of horizontal strips forced to 3 when number of NVENCs > 2
Advertisement
Add Comment
Please, Sign In to add comment