Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ★ Cletus Taylor steps towards the lift, pressing and holding the raise button until the lift goes all the --
- ★ way up and locks itself into position. ((Cletus Taylor))
- ★ Cletus Taylor grips the oil drain pan, proceeding to roll it underneath the Caprice.
- ★ Cletus Taylor steps over towards the rolling Snap-On toolbox, proceeding to roll it over underneath ---
- ★ the lift, then sets the brakes. ((Cletus Taylor))
- ★ Cletus Taylor grabs ahold of an adjustable wrench, proceeding to reach up towards the Caprice's oil pan --
- ★ locating the drain plug; continuing to unscrew it with the wrench. ((Cletus Taylor))
- ★ The remaining oil would drain out through the drain port, filling the drain pan. ((Cletus Taylor))
- ★ Cletus Taylor allows the oil time to completely drain, then rolls the drain pan aside.
- ★ Cletus Taylor steps back underneath the Caprice, proceeding to swap the adjustable wrench for ---
- ★ an adjustable oil filter wrench. ((Cletus Taylor))
- ★ Cletus Taylor connects the wrench to the filter, adjusting it to size; then twists it to the left.
- ★ Cletus Taylor places the filter wrench aside, proceeding to grip the filter; twisting it to the left ---
- ★ a few times, disconnecting it. ((Cletus Taylor))
- ★ Cletus Taylor walks over towards the drain pan, turning the filter upside down; draining the oil from it.
- ★ Cletus Taylor places the filter on the pan, then walks away.
- ★ Cletus Taylor steps back towards the lift, taking hold of a ratchet and the appropriately sized ---
- ★ socket, proceeding to connect the socket to the ratchet. ((Cletus Taylor))
- ★ Cletus Taylor reaches up towards the oil pan, proceeding to unbolt the bolts holding the oil-cooler lines
- ★ --- to the oil pan. ((Cletus Taylor))
- ★ Cletus Taylor places the bolts on the lift, proceeding to carefulyl disconnect the oil cooler lines ---
- ★ allowing them to hang aside. ((Cletus Taylor))
- ★ Cletus Taylor then reaches over towards the oil pan, proceeding to unbolt each of the bolts holding ---
- ★ the pan to the engine block. ((Cletus Taylor))
- ★ Cletus Taylor gathers each bolt up, proceeding to place them aside; then grips the oil pan itself ---
- ★ carefully pulling it down, seperating it from the block. ((Cletus Taylor))
- ★ Cletus Taylor places the oil pan ontop of the toolbox, proceeding to place the bolts inside of it for ---
- ★ temporary safekeeping. ((Cletus Taylor))
- ★ Cletus Taylor places the ratchet aside, proceeding to look at the oilpan.
- ★ Cletus would easily spot the gasket has warped in some places, seperating from the pan. ((Cletus Taylor))
- ★ Cletus Taylor grips the gasket, carefully peeling it from the pan; then places it aside.
- ★ Cletus Taylor opens a drawer on the toolbox, taking hold of a roll of emery cloth; tearing a piece off.
- ★ Cletus Taylor reaches towards the oil pan, gently scrubbing away any remaining pieces of the gasket.
- ★ Cletus Taylor wipes over the surface with his hand, insuring all pieces are gone; then does the same ---
- ★ to the bottom of the Caprice's engine block. ((Cletus Taylor))
- ★ Cletus Taylor places the cloth back into the drawer, shutting it.
Advertisement
Add Comment
Please, Sign In to add comment
