API tools faq
paste
tzochios

dmesg.log

tzochios
Jul 25th, 2011
340
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.44 KB | None | 0 0
raw download clone embed print report
  1. Copyright (c) 1992-2011 The FreeBSD Project.
  2. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  3. The Regents of the University of California. All rights reserved.
  4. FreeBSD is a registered trademark of The FreeBSD Foundation.
  5. FreeBSD 8.2-RELEASE-p2 #1: Sat Jul 23 17:18:07 EEST 2011
  6. [email protected]:/usr/obj/usr/src/sys/CUSTOM amd64
  7. Timecounter "i8254" frequency 1193182 Hz quality 0
  8. CPU: AMD Phenom(tm) 9600 Quad-Core Processor (2306.51-MHz K8-class CPU)
  9. Origin = "AuthenticAMD" Id = 0x100f22 Family = 10 Model = 2 Stepping = 2
  10. Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  11. Features2=0x802009<SSE3,MON,CX16,POPCNT>
  12. AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  13. AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS>
  14. TSC: P-state invariant
  15. real memory = 4294967296 (4096 MB)
  16. avail memory = 4096565248 (3906 MB)
  17. ACPI APIC Table: <082510 APIC1543>
  18. FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
  19. FreeBSD/SMP: 1 package(s) x 4 core(s)
  20. cpu0 (BSP): APIC ID: 0
  21. cpu1 (AP): APIC ID: 1
  22. cpu2 (AP): APIC ID: 2
  23. cpu3 (AP): APIC ID: 3
  24. ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20101013/tbfadt-655)
  25. ioapic0 <Version 2.1> irqs 0-23 on motherboard
  26. kbd1 at kbdmux0
  27. acpi0: <\M^?\M^?\M^?\M^?\M^?1 ASR> on motherboard
  28. acpi0: [ITHREAD]
  29. acpi0: Power Button (fixed)
  30. acpi0: reservation of fee00000, 1000 (3) failed
  31. acpi0: reservation of ffb80000, 80000 (3) failed
  32. acpi0: reservation of fec10000, 20 (3) failed
  33. acpi0: reservation of 0, a0000 (3) failed
  34. acpi0: reservation of 100000, bff00000 (3) failed
  35. Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
  36. acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
  37. cpu0: <ACPI CPU> on acpi0
  38. cpu1: <ACPI CPU> on acpi0
  39. cpu2: <ACPI CPU> on acpi0
  40. cpu3: <ACPI CPU> on acpi0
  41. acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
  42. acpi_hpet0: HPET never increments, disabling
  43. device_attach: acpi_hpet0 attach returned 6
  44. pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
  45. pci0: <ACPI PCI bus> on pcib0
  46. pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
  47. pci1: <ACPI PCI bus> on pcib1
  48. pcib2: <PCI-PCI bridge> mem 0xfbbe0000-0xfbbfffff irq 18 at device 0.0 on pci1
  49. pci2: <PCI bus> on pcib2
  50. pcib3: <PCI-PCI bridge> irq 18 at device 0.0 on pci2
  51. pci3: <PCI bus> on pcib3
  52. vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xc0000000-0xcfffffff,0xfbcf0000-0xfbcfffff irq 18 at device 0.0 on pci3
  53. pcib4: <PCI-PCI bridge> irq 18 at device 12.0 on pci2
  54. pci4: <PCI bus> on pcib4
  55. vgapci1: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0xfbdf0000-0xfbdfffff irq 18 at device 0.0 on pci4
  56. drm1: <ATI Radeon HD3870 X2> on vgapci1
  57. info: [drm] MSI enabled 1 message(s)
  58. vgapci1: child drm1 requested pci_enable_busmaster
  59. info: [drm] Initialized radeon 1.31.0 20080613
  60. hdac0: <ATI (Unknown) High Definition Audio Controller> mem 0xfbdec000-0xfbdeffff irq 19 at device 0.1 on pci4
  61. hdac0: HDA Driver Revision: 20100226_0142
  62. hdac0: [ITHREAD]
  63. pcib5: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0
  64. pci5: <ACPI PCI bus> on pcib5
  65. pcib6: <PCI-PCI bridge> at device 0.0 on pci5
  66. pci6: <PCI bus> on pcib6
  67. hdac1: <Generic High Definition Audio Controller> mem 0xfbefc000-0xfbefffff irq 17 at device 0.0 on pci6
  68. hdac1: HDA Driver Revision: 20100226_0142
  69. hdac1: [ITHREAD]
  70. pcib7: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
  71. pci7: <ACPI PCI bus> on pcib7
  72. re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfbfff000-0xfbffffff irq 18 at device 0.0 on pci7
  73. re0: Using 1 MSI messages
  74. re0: Chip rev. 0x38000000
  75. re0: MAC rev. 0x00000000
  76. miibus0: <MII bus> on re0
  77. rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
  78. rgephy0: 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
  79. re0: Ethernet address: 00:24:8c:d0:55:eb
  80. re0: [FILTER]
  81. atapci0: <ATI IXP700/800 SATA300 controller> port 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfbaffc00-0xfbafffff irq 22 at device 17.0 on pci0
  82. atapci0: [ITHREAD]
  83. atapci0: AHCI v1.10 controller with 4 3Gbps ports, PM supported
  84. ata2: <ATA channel 0> on atapci0
  85. ata2: port is not ready (timeout 0ms) tfd = 000001d0
  86. ata2: software reset clear timeout
  87. ata2: [ITHREAD]
  88. ata3: <ATA channel 1> on atapci0
  89. ata3: port is not ready (timeout 0ms) tfd = 000001d0
  90. ata3: software reset clear timeout
  91. ata3: [ITHREAD]
  92. ata4: <ATA channel 2> on atapci0
  93. ata4: port is not ready (timeout 0ms) tfd = 00000180
  94. ata4: software reset clear timeout
  95. ata4: [ITHREAD]
  96. ata5: <ATA channel 3> on atapci0
  97. ata5: [ITHREAD]
  98. ohci0: <OHCI (generic) USB controller> mem 0xfbafe000-0xfbafefff irq 16 at device 18.0 on pci0
  99. ohci0: [ITHREAD]
  100. usbus0: <OHCI (generic) USB controller> on ohci0
  101. ohci1: <OHCI (generic) USB controller> mem 0xfbafd000-0xfbafdfff irq 16 at device 18.1 on pci0
  102. ohci1: [ITHREAD]
  103. usbus1: <OHCI (generic) USB controller> on ohci1
  104. ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfbaff800-0xfbaff8ff irq 17 at device 18.2 on pci0
  105. ehci0: [ITHREAD]
  106. ehci0: AMD SB600/700 quirk applied
  107. usbus2: EHCI version 1.0
  108. usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
  109. ohci2: <OHCI (generic) USB controller> mem 0xfbafc000-0xfbafcfff irq 18 at device 19.0 on pci0
  110. ohci2: [ITHREAD]
  111. usbus3: <OHCI (generic) USB controller> on ohci2
  112. ohci3: <OHCI (generic) USB controller> mem 0xfbafb000-0xfbafbfff irq 18 at device 19.1 on pci0
  113. ohci3: [ITHREAD]
  114. usbus4: <OHCI (generic) USB controller> on ohci3
  115. ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfbaff400-0xfbaff4ff irq 19 at device 19.2 on pci0
  116. ehci1: [ITHREAD]
  117. ehci1: AMD SB600/700 quirk applied
  118. usbus5: EHCI version 1.0
  119. usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
  120. pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
  121. atapci1: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
  122. ata0: <ATA channel 0> on atapci1
  123. ata0: [ITHREAD]
  124. ata1: <ATA channel 1> on atapci1
  125. ata1: [ITHREAD]
  126. isab0: <PCI-ISA bridge> at device 20.3 on pci0
  127. isa0: <ISA bus> on isab0
  128. pcib8: <ACPI PCI-PCI bridge> at device 20.4 on pci0
  129. pci8: <ACPI PCI bus> on pcib8
  130. ohci4: <OHCI (generic) USB controller> mem 0xfbafa000-0xfbafafff irq 18 at device 20.5 on pci0
  131. ohci4: [ITHREAD]
  132. usbus6: <OHCI (generic) USB controller> on ohci4
  133. acpi_button0: <Power Button> on acpi0
  134. atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
  135. acpi_hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
  136. uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
  137. uart0: [FILTER]
  138. ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
  139. ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
  140. ppc0: [ITHREAD]
  141. ppbus0: <Parallel port bus> on ppc0
  142. plip0: <PLIP network interface> on ppbus0
  143. plip0: [ITHREAD]
  144. lpt0: <Printer> on ppbus0
  145. lpt0: [ITHREAD]
  146. lpt0: Interrupt-driven port
  147. ppi0: <Parallel I/O> on ppbus0
  148. orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0
  149. sc0: <System console> at flags 0x100 on isa0
  150. sc0: VGA <16 virtual consoles, flags=0x300>
  151. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
  152. atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
  153. atkbd0: <AT Keyboard> irq 1 on atkbdc0
  154. kbd0 at atkbd0
  155. atkbd0: [GIANT-LOCKED]
  156. atkbd0: [ITHREAD]
  157. acpi_throttle0: <ACPI CPU Throttling> on cpu0
  158. hwpstate0: <Cool`n'Quiet 2.0> on cpu0
  159. Timecounters tick every 1.000 msec
  160. usbus0: 12Mbps Full Speed USB v1.0
  161. usbus1: 12Mbps Full Speed USB v1.0
  162. usbus2: 480Mbps High Speed USB v2.0
  163. usbus3: 12Mbps Full Speed USB v1.0
  164. usbus4: 12Mbps Full Speed USB v1.0
  165. usbus5: 480Mbps High Speed USB v2.0
  166. usbus6: 12Mbps Full Speed USB v1.0
  167. ad2: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata1-master UDMA133 SATA
  168. ugen0.1: <ATI> at usbus0
  169. uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
  170. ugen1.1: <ATI> at usbus1
  171. uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
  172. ugen2.1: <ATI> at usbus2
  173. uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
  174. ugen3.1: <ATI> at usbus3
  175. uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
  176. ugen4.1: <ATI> at usbus4
  177. uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
  178. ugen5.1: <ATI> at usbus5
  179. uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
  180. ugen6.1: <ATI> at usbus6
  181. uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
  182. ad3: 286187MB <Maxtor 7L300S0 BANC1G10> at ata1-slave UDMA133 SATA
  183. ad4: 143089MB <WDC WD1500ADFD-00NLR5 21.07QR5> at ata2-master UDMA100 SATA 1.5Gb/s
  184. ad6: 610480MB <Seagate ST3640323AS SD15> at ata3-master UDMA100 SATA 3Gb/s
  185. acd0: DVDR <Optiarc DVD RW AD-7203S/1.01> at ata4-master UDMA100 SATA 1.5Gb/s
  186. hdac0: HDA Codec #0: ATI R6xx HDMI
  187. pcm0: <HDA ATI R6xx HDMI PCM #0 HDMI> at cad 0 nid 1 on hdac0
  188. hdac1: HDA Codec #1: Unknown Codec
  189. pcm1: <HDA Unknown Codec PCM #0 Analog> at cad 1 nid 1 on hdac1
  190. pcm2: <HDA Unknown Codec PCM #1 Analog> at cad 1 nid 1 on hdac1
  191. pcm3: <HDA Unknown Codec PCM #2 Digital> at cad 1 nid 1 on hdac1
  192. SMP: AP CPU #2 Launched!
  193. SMP: AP CPU #1 Launched!
  194. SMP: AP CPU #3 Launched!
  195. uhub6: 2 ports with 2 removable, self powered
  196. uhub3: 3 ports with 3 removable, self powered
  197. uhub1: 3 ports with 3 removable, self powered
  198. uhub4: 3 ports with 3 removable, self powered
  199. uhub0: 3 ports with 3 removable, self powered
  200. GEOM: ad4: partition 2 does not start on a track boundary.
  201. GEOM: ad4: partition 2 does not end on a track boundary.
  202. GEOM: ad4: partition 1 does not start on a track boundary.
  203. GEOM: ad4: partition 1 does not end on a track boundary.
  204. GEOM: ad6: partition 1 does not start on a track boundary.
  205. GEOM: ad6: partition 1 does not end on a track boundary.
  206. Root mount waiting for: usbus5 usbus2
  207. Root mount waiting for: usbus5 usbus2
  208. Root mount waiting for: usbus5 usbus2
  209. uhub5: 6 ports with 6 removable, self powered
  210. uhub2: 6 ports with 6 removable, self powered
  211. usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored)
  212. usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
  213. ugen0.2: <Microsoft> at usbus0
  214. ukbd0: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2> on usbus0
  215. ugen5.2: <CBM> at usbus5
  216. umass0: <CBM Flash Disk, class 0/0, rev 2.00/1.00, addr 2> on usbus5
  217. umass0: SCSI over Bulk-Only; quirks = 0x4000
  218. kbd2 at ukbd0
  219. uhid0: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, addr 2> on usbus0
  220. Root mount waiting for: usbus5
  221. usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored)
  222. usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR
  223. ugen0.3: <Logitech> at usbus0
  224. umass0:0:0:-1: Attached to scbus0
  225. Trying to mount root from ufs:/dev/ad2s1a
  226. da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
  227. da0: <CBM Flash Disk 5.00> Removable Direct Access SCSI-2 device
  228. da0: 40.000MB/s transfers
  229. da0: 1010MB (2068992 512 byte sectors: 64H 32S/T 1010C)
  230. uhid1: <Logitech Logitech Cordless RumblePad 2, class 0/0, rev 1.10/2.00, addr 3> on usbus0
  231. ugen3.2: <Microsoft> at usbus3
  232. ums0: <Microsoft Microsoft 2.4GHz Transceiver V2.0, class 0/0, rev 2.00/2.70, addr 2> on usbus3
  233. ums0: 5 buttons and [XYZT] coordinates ID=17
  234. ums0: 0 buttons and [T] coordinates ID=0
  235. uhub_explore: illegal enable change, port 3
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!