API tools faq
paste
Advertisement
smyl3

Xiaomi r3gv2 OpenWRT kernel log

smyl3
Jul 1st, 2023 (edited)
48
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 18.64 KB | None | 0 0
raw download clone embed print report
  1. kernel log
  2. Created Friday 30 June 2023
  3.  
  4. [    0.000000] Linux version 5.15.118 (builder@buildhost) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23228-cd17d8df2a) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Mon Jun 26 11:20:39 2023
  5. [    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
  6. [    0.000000] printk: bootconsole [early0] enabled
  7. [    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
  8. [    0.000000] MIPS: machine is Xiaomi Mi Router 3G v2
  9. [    0.000000] Initrd not found or empty - disabling initrd
  10. [    0.000000] VPE topology {2,2} total 4
  11. [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  12. [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  13. [    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  14. [    0.000000] Zone ranges:
  15. [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
  16. [    0.000000]   HighMem  empty
  17. [    0.000000] Movable zone start for each node
  18. [    0.000000] Early memory node ranges
  19. [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
  20. [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  21. [    0.000000] percpu: Embedded 11 pages/cpu s15856 r8192 d21008 u45056
  22. [    0.000000] pcpu-alloc: s15856 r8192 d21008 u45056 alloc=11*4096
  23. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  24. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32480
  25. [    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
  26. [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
  27. [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
  28. [    0.000000] Writing ErrCtl register=00000000
  29. [    0.000000] Readback ErrCtl register=00000000
  30. [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  31. [    0.000000] Memory: 119200K/131072K available (7336K kernel code, 627K rwdata, 884K rodata, 1252K init, 251K bss, 11872K reserved, 0K cma-reserved, 0K highmem)
  32. [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  33. [    0.000000] rcu: Hierarchical RCU implementation.
  34. [    0.000000]  Tracing variant of Tasks RCU enabled.
  35. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  36. [    0.000000] NR_IRQS: 256
  37. [    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
  38. [    0.000004] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 4398046511103ns
  39. [    0.008040] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
  40. [    0.066209] pid_max: default: 32768 minimum: 301
  41. [    0.071634] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  42. [    0.078845] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  43. [    0.090312] rcu: Hierarchical SRCU implementation.
  44. [    0.095765] smp: Bringing up secondary CPUs ...
  45. [    0.101181] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  46. [    0.101207] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  47. [    0.101221] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  48. [    0.101265] CPU1 revision is: 0001992f (MIPS 1004Kc)
  49. [    0.160510] Synchronize counters for CPU 1: done.
  50. [    0.192585] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  51. [    0.192605] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  52. [    0.192617] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  53. [    0.192644] CPU2 revision is: 0001992f (MIPS 1004Kc)
  54. [    0.251784] Synchronize counters for CPU 2: done.
  55. [    0.282429] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  56. [    0.282449] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  57. [    0.282460] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  58. [    0.282491] CPU3 revision is: 0001992f (MIPS 1004Kc)
  59. [    0.336972] Synchronize counters for CPU 3: done.
  60. [    0.366833] smp: Brought up 1 node, 4 CPUs
  61. [    0.376036] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  62. [    0.385832] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
  63. [    0.392896] pinctrl core: initialized pinctrl subsystem
  64. [    0.399717] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  65. [    0.406354] thermal_sys: Registered thermal governor 'step_wise'
  66. [    0.406910] cpuidle: using governor teo
  67. [    0.422799] FPU Affinity set after 11720 emulations
  68. [    0.435518] clocksource: Switched to clocksource GIC
  69. [    0.441868] NET: Registered PF_INET protocol family
  70. [    0.446914] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
  71. [    0.454921] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  72. [    0.463248] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  73. [    0.470914] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
  74. [    0.478533] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
  75. [    0.485543] TCP: Hash tables configured (established 1024 bind 1024)
  76. [    0.491969] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  77. [    0.498452] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  78. [    0.505731] NET: Registered PF_UNIX/PF_LOCAL protocol family
  79. [    0.511335] PCI: CLS 0 bytes, default 32
  80. [    0.518240] workingset: timestamp_bits=14 max_order=15 bucket_order=1
  81. [    0.530069] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  82. [    0.535883] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  83. [    0.547307] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  84. [    0.558519] mt7621_gpio 1e000600.gpio: registering 32 gpios
  85. [    0.564386] mt7621_gpio 1e000600.gpio: registering 32 gpios
  86. [    0.570337] mt7621_gpio 1e000600.gpio: registering 32 gpios
  87. [    0.576369] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
  88. [    0.583026] mt7621-pci 1e140000.pcie:   No bus range found for /pcie@1e140000, using [bus 00-ff]
  89. [    0.591787] mt7621-pci 1e140000.pcie:      MEM 0x0060000000..0x006fffffff -> 0x0060000000
  90. [    0.599885] mt7621-pci 1e140000.pcie:       IO 0x001e160000..0x001e16ffff -> 0x0000000000
  91. [    0.965504] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
  92. [    0.972395] mt7621-pci 1e140000.pcie: PCIE0 enabled
  93. [    0.977248] mt7621-pci 1e140000.pcie: PCIE1 enabled
  94. [    0.982089] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
  95. [    0.989236] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
  96. [    0.995527] pci_bus 0000:00: root bus resource [bus 00-ff]
  97. [    1.000930] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
  98. [    1.007772] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
  99. [    1.013940] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
  100. [    1.019883] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
  101. [    1.026166] pci 0000:00:00.0: supports D1
  102. [    1.030082] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  103. [    1.036526] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
  104. [    1.042502] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
  105. [    1.048782] pci 0000:00:01.0: supports D1
  106. [    1.052700] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
  107. [    1.060533] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
  108. [    1.066519] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
  109. [    1.073249] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  110. [    1.080002] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
  111. [    1.087421] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  112. [    1.092572] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
  113. [    1.098636] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
  114. [    1.105355] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
  115. [    1.112543] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  116. [    1.119349] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
  117. [    1.125288] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
  118. [    1.131642] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
  119. [    1.139069] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
  120. [    1.144219] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff]
  121. [    1.150292] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
  122. [    1.157023] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
  123. [    1.163612] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
  124. [    1.170158] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
  125. [    1.177066] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
  126. [    1.183611] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
  127. [    1.190542] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
  128. [    1.197282] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
  129. [    1.204436] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
  130. [    1.211198] pci 0000:00:00.0: BAR 7: assigned [io  0x0000-0x0fff]
  131. [    1.217239] pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
  132. [    1.223278] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
  133. [    1.230557] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
  134. [    1.237716] pci 0000:00:00.0: PCI bridge to [bus 01]
  135. [    1.242625] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
  136. [    1.248688] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
  137. [    1.255411] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
  138. [    1.262604] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff]
  139. [    1.269347] pci 0000:00:01.0: PCI bridge to [bus 02]
  140. [    1.274246] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
  141. [    1.280310] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
  142. [    1.289471] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  143. [    1.300736] printk: console [ttyS0] disabled
  144. [    1.305034] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
  145. [    1.314037] printk: console [ttyS0] enabled
  146. [    1.322298] printk: bootconsole [early0] disabled
  147. [    1.335562] spi-mt7621 1e000b00.spi: sys_freq: 220000000
  148. [    1.342248] spi-nor spi0.0: gd25q128 (16384 Kbytes)
  149. [    1.347318] 8 fixed-partitions partitions found on MTD device spi0.0
  150. [    1.353687] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
  151. [    1.361059] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
  152. [    1.368988] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
  153. [    1.376360] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
  154. [    1.383894] Creating 8 MTD partitions on "spi0.0":
  155. [    1.388703] 0x000000000000-0x000000030000 : "u-boot"
  156. [    1.395099] 0x000000030000-0x000000040000 : "u-boot-env"
  157. [    1.401852] 0x000000040000-0x000000050000 : "Bdata"
  158. [    1.407854] 0x000000050000-0x000000060000 : "factory"
  159. [    1.413934] 0x000000060000-0x000000070000 : "crash"
  160. [    1.419883] 0x000000070000-0x000000080000 : "cfg_bak"
  161. [    1.426016] 0x000000080000-0x000000180000 : "overlay"
  162. [    1.432113] 0x000000180000-0x000001000000 : "firmware"
  163. [    1.438630] 2 uimage-fw partitions found on MTD device firmware
  164. [    1.444561] Creating 2 MTD partitions on "firmware":
  165. [    1.449564] 0x000000000000-0x0000002af7ce : "kernel"
  166. [    1.454515] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only
  167. [    1.463879] 0x0000002af7ce-0x000000e80000 : "rootfs"
  168. [    1.468896] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only
  169. [    1.479076] mtd: setting mtd9 (rootfs) as root device
  170. [    1.484235] 1 squashfs-split partitions found on MTD device rootfs
  171. [    1.490444] 0x000000630000-0x000000e80000 : "rootfs_data"
  172. [    1.647265] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
  173. [    1.661071] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
  174. [    1.673426] mtk_soc_eth 1e100000.ethernet wan: mediatek frame engine at 0xbe100000, irq 21
  175. [    1.683498] i2c_dev: i2c /dev entries driver
  176. [    1.691762] NET: Registered PF_INET6 protocol family
  177. [    1.699340] Segment Routing with IPv6
  178. [    1.703079] In-situ OAM (IOAM) with IPv6
  179. [    1.707119] NET: Registered PF_PACKET protocol family
  180. [    1.712280] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  181. [    1.726153] 8021q: 802.1Q VLAN Support v1.8
  182. [    1.736771] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
  183. [    1.760378] mt7530-mdio mdio-bus:1f: configuring for fixed/rgmii link mode
  184. [    1.768134] mt7530-mdio mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx
  185. [    1.776996] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7530 PHY] (irq=23)
  186. [    1.790083] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7530 PHY] (irq=24)
  187. [    1.802721] DSA: tree 0 setup
  188. [    1.812396] VFS: Mounted root (squashfs filesystem) readonly on device 31:9.
  189. [    1.823586] Freeing unused kernel image (initmem) memory: 1252K
  190. [    1.829554] This architecture does not have kernel memory protection.
  191. [    1.835996] Run /sbin/init as init process
  192. [    1.840075]   with arguments:
  193. [    1.840079]     /sbin/init
  194. [    1.840085]   with environment:
  195. [    1.840090]     HOME=/
  196. [    1.840095]     TERM=linux
  197. [    2.276475] init: Console is alive
  198. [    2.280282] init: - watchdog -
  199. [    2.929790] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  200. [    2.983493] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  201. [    2.996044] init: - preinit -
  202. [    3.844261] random: jshn: uninitialized urandom read (4 bytes read)
  203. [    3.961717] random: jshn: uninitialized urandom read (4 bytes read)
  204. [    4.000135] random: jshn: uninitialized urandom read (4 bytes read)
  205. [    4.268646] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
  206. [    4.281226] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  207. [    4.286100] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
  208. [    4.297277] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  209. [    6.519617] jffs2: notice: (444) jffs2_build_xattr_subsystem: complete building xattr subsystem, 28 of xdatum (10 unchecked, 18 orphan) and 31 of xref (6 dead, 13 orphan) found.
  210. [    6.537362] mount_root: switching to jffs2 overlay
  211. [    6.545417] overlayfs: upper fs does not support tmpfile.
  212. [    6.561578] urandom-seed: Seeding with /etc/urandom.seed
  213. [    6.666526] procd: - early -
  214. [    6.669645] procd: - watchdog -
  215. [    7.285695] procd: - watchdog -
  216. [    7.290021] procd: - ubus -
  217. [    7.357028] random: ubusd: uninitialized urandom read (4 bytes read)
  218. [    7.365659] random: ubusd: uninitialized urandom read (4 bytes read)
  219. [    7.377278] random: ubusd: uninitialized urandom read (4 bytes read)
  220. [    7.388127] procd: - init -
  221. [    7.923007] kmodloader: loading kernel modules from /etc/modules.d/*
  222. [    8.136846] urngd: v1.0.2 started.
  223. [    8.156920] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b
  224. [    8.164407] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36
  225. [    8.357213] random: crng init done
  226. [    8.360730] random: 31 urandom warning(s) missed due to ratelimiting
  227. [    8.379696] pci 0000:00:01.0: enabling device (0006 -> 0007)
  228. [    8.385415] mt7603e 0000:02:00.0: enabling device (0000 -> 0002)
  229. [    8.391643] mt7603e 0000:02:00.0: ASIC revision: 76030010
  230. [    9.430249] mt7603e 0000:02:00.0: Firmware Version: ap_pcie
  231. [    9.435872] mt7603e 0000:02:00.0: Build Time: 20160107100755
  232. [    9.475524] mt7603e 0000:02:00.0: firmware init done
  233. [    9.648258] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  234. [    9.659111] pci 0000:00:00.0: enabling device (0006 -> 0007)
  235. [    9.664807] mt76x2e 0000:01:00.0: enabling device (0000 -> 0002)
  236. [    9.671035] mt76x2e 0000:01:00.0: ASIC revision: 76120044
  237. [   10.430945] mt76x2e 0000:01:00.0: ROM patch build: 20141115060606a
  238. [   10.441311] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
  239. [   10.446847] mt76x2e 0000:01:00.0: Build: 1
  240. [   10.450928] mt76x2e 0000:01:00.0: Build Time: 201607111443____
  241. [   10.475533] mt76x2e 0000:01:00.0: Firmware running!
  242. [   10.481896] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
  243. [   10.533296] PPP generic driver version 2.4.2
  244. [   10.539396] NET: Registered PF_PPPOX protocol family
  245. [   10.552479] kmodloader: done loading kernel modules from /etc/modules.d/*
  246. [   17.682949] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
  247. [   17.715925] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
  248. [   17.724216] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  249. [   17.734158] br-lan: port 1(eth0) entered blocking state
  250. [   17.739603] br-lan: port 1(eth0) entered disabled state
  251. [   17.745573] device eth0 entered promiscuous mode
  252. [   17.759539] br-lan: port 1(eth0) entered blocking state
  253. [   17.764841] br-lan: port 1(eth0) entered forwarding state
  254. [   17.791732] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
  255. [   17.800800] br-lan: port 2(lan1) entered blocking state
  256. [   17.806190] br-lan: port 2(lan1) entered disabled state
  257. [   17.813972] device lan1 entered promiscuous mode
  258. [   17.834689] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode
  259. [   17.844159] br-lan: port 3(lan2) entered blocking state
  260. [   17.849583] br-lan: port 3(lan2) entered disabled state
  261. [   17.857101] device lan2 entered promiscuous mode
  262. [   17.883553] mtk_soc_eth 1e100000.ethernet wan: PHY [mdio-bus:04] driver [MediaTek MT7530 PHY] (irq=POLL)
  263. [   17.893209] mtk_soc_eth 1e100000.ethernet wan: configuring for phy/rgmii link mode
  264. [   19.130770] br-lan: port 4(phy0-ap0) entered blocking state
  265. [   19.136471] br-lan: port 4(phy0-ap0) entered disabled state
  266. [   19.142660] device phy0-ap0 entered promiscuous mode
  267. [   19.148197] br-lan: port 4(phy0-ap0) entered blocking state
  268. [   19.153812] br-lan: port 4(phy0-ap0) entered forwarding state
  269. [   19.438730] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap0: link becomes ready
  270. [   20.724879] mt7530-mdio mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
  271. [   20.732917] br-lan: port 2(lan1) entered blocking state
  272. [   20.738196] br-lan: port 2(lan1) entered forwarding state
  273. [   21.005777] mtk_soc_eth 1e100000.ethernet wan: Link is Up - 1Gbps/Full - flow control off
  274. [   21.014004] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
  275. [   21.428617] mt7530-mdio mdio-bus:1f lan2: Link is Up - 1Gbps/Full - flow control rx/tx
  276. [   21.436664] br-lan: port 3(lan2) entered blocking state
  277. [   21.441886] br-lan: port 3(lan2) entered forwarding state
  278. [   21.607162] pppoe-wanpppoe: renamed from ppp0
  279.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!