API tools faq
paste
jkhsjdhjs

Odroid C2 Successful Boot

jkhsjdhjs
Oct 19th, 2016
85
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 44.74 KB | None | 0 0
raw download clone embed print report
  1. GXBB:GXBB:GXBB:GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:800;NAND:81;SD:0;READ:0;CHK:0;
  2. TE: 167013
  3. no sdio debug board detected
  4.  
  5. BL2 Built : 11:44:26, Nov 25 2015.
  6. gxb gfb13a3b-c2 - jcao@wonton
  7.  
  8. Board ID = 8
  9. set vcck to 1100 mv
  10. set vddee to 1050 mv
  11. CPU clk: 1536MHz
  12. DDR channel setting: DDR0 Rank0+1 same
  13. DDR0: 2048MB(auto) @ 912MHz(2T)-13
  14. DataBus test pass!
  15. AddrBus test pass!
  16. Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x000000b0
  17. Load bl30 from SD, src: 0x00010200, des: 0x01000000, size: 0x00009ef0
  18. Sending bl30........................................OK.
  19. Run bl30...
  20. Load bl301 from SD, src: 0x0001c200, des: 0x01000000, size: 0x000012c0
  21. Wait bl30...Done
  22. Sending bl301.....OK.
  23. Run bl301...
  24. ad bl31 from SD, src: 0x00020200, des: 0x10100000, size: 0x00011130
  25.  
  26.  
  27. --- UART initialized after reboot ---
  28. [Reset cause: unknown]
  29. [Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14 tao.zeng@droid04]
  30. bl30: check_permit, count is 1
  31. bl30: check_permit: ok!
  32. chipid: ef bLoad bl33 from SD, src: 0x00034200, des: 0x01000000, size: 0x00069230
  33. e ad de d f0 ad ba ef be ad de not ES chip
  34. [0.281815 Inits done]
  35. secure task start!
  36. high task start!
  37. low task start!
  38. NOTICE: BL3-1: v1.0(debug):4d2e34d
  39. NOTICE: BL3-1: Built : 17:08:35, Oct 29 2015
  40. INFO: BL3-1: Initializing runtime services
  41. INFO: BL3-1: Preparing for EL3 exit to normal world
  42. INFO: BL3-1: Next image address = 0x1000000
  43. INFO: BL3-1: Next image spsr = 0x3c9
  44.  
  45.  
  46. U-Boot 2015.01-12 (Sep 12 2016 - 18:38:01) Arch Linux ARM
  47.  
  48. DRAM: 2 GiB
  49. Relocation Offset is: 76f3d000
  50. -------------------------------------------------
  51. * Welcome to Hardkernel's ODROID-C2
  52. -------------------------------------------------
  53. CPU : AMLogic S905
  54. S/N : HKC11122F37E48DE
  55. MAC : 00:1e:06:10:6c:5e
  56. BID : HKC1311604
  57. -------------------------------------------------
  58. register usb cfg[1][0] = 0000000077f974f0
  59. register usb cfg[0][1] = 0000000077f97510
  60. vpu detect type: 5
  61. vpu clk_level = 7
  62. set vpu clk: 666667000Hz, readback: 666660000Hz(0x300)
  63. MMC: aml_priv->desc_buf = 0x0000000073f35d30
  64. aml_priv->desc_buf = 0x0000000073f37ec0
  65. SDIO Port B: 0, SDIO Port C: 1
  66. ret = 1 .[mmc_init] mmc init success
  67. *** Warning - bad CRC, using default environment
  68.  
  69. Saving Environment to MMC...
  70. Writing to MMC(0)... done
  71. In: serial
  72. Out: serial
  73. Err: serial
  74. ----------------------------------
  75. MMC Size : 32 GB
  76. ----------------------------------
  77. ** Unrecognized filesystem type **
  78. ** Unrecognized filesystem type **
  79. movi: the partiton 'logo' is reading...
  80.  
  81. MMC read: dev # 0, block # 58976, count 4096 ... 4096 blocks read: OK
  82. hpd_state=1
  83. [CANVAS]addr=0x3f800000 width=3840, height=1440
  84.  
  85. set hdmitx VIC = 16
  86. hdmitx phy setting done
  87. set hdmitx VIC = 16
  88. hdmitx phy setting done
  89. Error: Bad gzipped data
  90. There is no valid bmp file at the given address
  91. Saving Environment to MMC...
  92. Writing to MMC(0)... done
  93. Net: Meson_Ethernet
  94. Hit [Enter] key twice to stop autoboot: 0
  95. 5483 bytes read in 17 ms (314.5 KiB/s)
  96. cfgload: applying boot.ini...
  97. cfgload: setenv m "1080p60hz" # Progressive 60Hz
  98. cfgload: setenv m_bpp "32"
  99. cfgload: setenv hpd "true"
  100. cfgload: setenv condev "console=ttyS0,115200n8 console=tty0" # on both
  101. cfgload: setenv mesontimer "1"
  102. cfgload: setenv nographics "0"
  103. cfgload: setenv monitor_onoff "false" # true or false
  104. cfgload: setenv maxcpus "4"
  105. cfgload: setenv max_freq "1536" # 1.536GHz
  106. cfgload: if test "${m}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi
  107. cfgload: setenv bootargs "root=/dev/mmcblk0p1 rootwait rw ${condev} no_console_suspend hdmimode=${m} ${cmode} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} monitor_onoff=${monitor_onoff}"
  108. cfgload: setenv loadaddr "0x11000000"
  109. cfgload: setenv dtb_loadaddr "0x1000000"
  110. cfgload: setenv initrd_loadaddr "0x13000000"
  111. cfgload: load mmc 0:1 ${loadaddr} /boot/Image
  112. 13248952 bytes read in 619 ms (20.4 MiB/s)
  113. cfgload: load mmc 0:1 ${dtb_loadaddr} /boot/dtbs/meson64_odroidc2.dtb
  114. 29164 bytes read in 18 ms (1.5 MiB/s)
  115. cfgload: fdt addr ${dtb_loadaddr}
  116. cfgload: if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
  117. cfgload: if test "${mesontimer}" = "1"; then fdt rm /timer; fi
  118. cfgload: if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
  119. cfgload: if test "${nographics}" = "1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm /picdec; fdt rm /ppmgr; fi
  120. cfgload: if test "${nographics}" = "1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi
  121. cfgload: if test "${nographics}" = "1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi
  122. cfgload: load mmc 0:1 ${initrd_loadaddr} /boot/initramfs-linux.img
  123. 3817516 bytes read in 194 ms (18.8 MiB/s)
  124. cfgload: booti ${loadaddr} ${initrd_loadaddr}:${filesize} ${dtb_loadaddr}
  125. load dtb from 0x1000000 ......
  126. ## Flattened Device Tree blob at 01000000
  127. Booting using the fdt blob at 0x1000000
  128. Loading Ramdisk to 73b8f000, end 73f3302c ... OK
  129. Loading Device Tree to 000000001fff5000, end 000000001ffff1eb ... OK
  130.  
  131. Starting kernel ...
  132.  
  133. uboot time: 4455996 us
  134. [ 0.000000] Initializing cgroup subsys cpuset
  135. [ 0.000000] Initializing cgroup subsys cpu
  136. [ 0.000000] Initializing cgroup subsys cpuacct
  137. [ 0.000000] Linux version 3.14.79-3-ARCH (builduser@leming) (gcc version 6.2.1 20160830 (GCC) ) #1 SMP PREEMPT Thu Sep 22 18:44:33 MDT 2016
  138. [ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
  139. [ 0.000000] secmon: share mem setup
  140. [ 0.000000] Reserved memory: initialized node linux,secmon, compatible id aml_secmon_memory
  141. [ 0.000000] __reserved_mem_alloc_size: linux,meson-fb
  142. [ 0.000000] fb: Reserved memory: created fb at 0x0000000078000000, size 128 MiB
  143. [ 0.000000] Reserved memory: initialized node linux,meson-fb, compatible id amlogic, fb-memory
  144. [ 0.000000] __reserved_mem_alloc_size: linux,di
  145. [ 0.000000] DI reserved memory: created CMA memory pool at 0x0000000076200000, size 30 MiB
  146. [ 0.000000] Reserved memory: initialized node linux,di, compatible id amlogic, di-mem
  147. [ 0.000000] __reserved_mem_alloc_size: linux,ion-dev
  148. [ 0.000000] linux,ion-dev add multi user:ffffffc001cf55d0
  149. [ 0.000000] ion_dev mem setup
  150. [ 0.000000] Reserved memory: initialized node linux,ion-dev, compatible id amlogic, idev-mem
  151. [ 0.000000] ppmgr share mem setup
  152. [ 0.000000] linux,ion-dev add multi user:ffffffc001cfe020
  153. [ 0.000000] Reserved memory: initialized node linux,ion-dev, compatible id amlogic, idev-mem
  154. [ 0.000000] __reserved_mem_alloc_size: linux,codec_mm_cma
  155. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000067c00000, size 188 MiB
  156. [ 0.000000] Reserved memory: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
  157. [ 0.000000] __reserved_mem_alloc_size: linux,picdec
  158. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000064c00000, size 48 MiB
  159. [ 0.000000] Reserved memory: initialized node linux,picdec, compatible id shared-dma-pool
  160. [ 0.000000] __reserved_mem_alloc_size: linux,codec_mm_reserved
  161. [ 0.000000] codec_mm:vdec: reserved mem setup
  162. [ 0.000000] Reserved memory: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
  163. [ 0.000000] cma: Reserved 8 MiB at 60000000
  164. [ 0.000000] psci: probing function IDs from device-tree
  165. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ffffffc074199000 s16000 r8192 d20864 u45056
  166. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 478344
  167. [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rootwait rw console=ttyS0,115200n8 console=tty0 no_console_suspend hdmimode=1080p60hz m_bpp=32 vout= fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=true max_freq=1536 maxcpus=4 monitor_onoff=false
  168. [ 0.000000] logo: get hdmimode: 1080p60hz
  169. [ 0.000000] dvfs [get_max_freq] - max_freq : 1536000000
  170. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  171. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  172. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  173. [ 0.000000] Memory: 1504492K/1947648K available (8794K kernel code, 650K rwdata, 2908K rodata, 579K init, 4095K bss, 443156K reserved)
  174. [ 0.000000] Virtual kernel memory layout:
  175. [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
  176. [ 0.000000] vmemmap : 0xffffff8040010000 - 0xffffff80421d0000 ( 33 MB)
  177. [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  178. [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc078000000 ( 1920 MB)
  179. [ 0.000000] .init : 0xffffffc001bef000 - 0xffffffc001c7fe80 ( 580 kB)
  180. [ 0.000000] .text : 0xffffffc001080000 - 0xffffffc001bee844 ( 11707 kB)
  181. [ 0.000000] .data : 0xffffffc001c80000 - 0xffffffc001d229a0 ( 651 kB)
  182. [ 0.000000] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
  183. [ 0.000000] Preemptible hierarchical RCU implementation.
  184. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  185. [ 0.000006] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
  186. [ 0.000022] mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff800000a994
  187. [ 0.000064] local timer MESON TIMER-G mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff800000c998
  188. [ 0.000083] local timer MESON TIMER-H mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff800000e99c
  189. [ 0.000102] local timer MESON TIMER-I mclk->mux_reg =ffffff8000002990,mclk->reg =ffffff80000109a0
  190. [ 0.000111] Switching to timer-based delay loop
  191. [ 0.000324] Console: colour dummy device 80x25
  192. [ 0.000757] console [tty0] enabled
  193. [ 0.003117] allocated 8388608 bytes of page_cgroup
  194. [ 0.003125] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  195. [ 0.003142] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
  196. [ 0.003159] pid_max: default: 32768 minimum: 301
  197. [ 0.003232] Security Framework initialized
  198. [ 0.003249] AppArmor: AppArmor disabled by boot time parameter
  199. [ 0.003287] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  200. [ 0.003298] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  201. [ 0.003701] Initializing cgroup subsys debug
  202. [ 0.003713] Initializing cgroup subsys memory
  203. [ 0.003731] Initializing cgroup subsys devices
  204. [ 0.003740] Initializing cgroup subsys freezer
  205. [ 0.003751] Initializing cgroup subsys net_cls
  206. [ 0.003759] Initializing cgroup subsys blkio
  207. [ 0.003767] Initializing cgroup subsys perf_event
  208. [ 0.003780] Initializing cgroup subsys hugetlb
  209. [ 0.003960] /cpus/cpu@0: Missing clock-frequency property
  210. [ 0.003972] /cpus/cpu@1: Missing clock-frequency property
  211. [ 0.003984] /cpus/cpu@2: Missing clock-frequency property
  212. [ 0.003995] /cpus/cpu@3: Missing clock-frequency property
  213. [ 0.004006] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
  214. [ 0.040158] Meson chip version = RevB (1F:B - 0:0)
  215. [ 0.060771] CPU1: Booted secondary processor
  216. [ 0.080750] CPU2: Booted secondary processor
  217. [ 0.100749] CPU3: Booted secondary processor
  218. [ 0.100803] Brought up 4 CPUs
  219. [ 0.100827] SMP: Total of 4 processors activated.
  220. [ 0.101286] devtmpfs: initialized
  221. [ 0.110274] xor: measuring software checksum speed
  222. [ 0.210056] 8regs : 2946.400 MB/sec
  223. [ 0.310048] 8regs_prefetch: 2626.400 MB/sec
  224. [ 0.410047] 32regs : 3490.000 MB/sec
  225. [ 0.510047] 32regs_prefetch: 3044.000 MB/sec
  226. [ 0.510055] xor: using function: 32regs (3490.000 MB/sec)
  227. [ 0.510067] pinctrl core: initialized pinctrl subsystem
  228. [ 0.510295] regulator-dummy: no parameters
  229. [ 0.511957] device-tree: Duplicate name in efusekey, renamed to "key0#1"
  230. [ 0.511984] device-tree: Duplicate name in efusekey, renamed to "key1#1"
  231. [ 0.512010] device-tree: Duplicate name in efusekey, renamed to "key2#1"
  232. [ 0.512035] device-tree: Duplicate name in efusekey, renamed to "key3#1"
  233. [ 0.513783] NET: Registered protocol family 16
  234. [ 0.514500] register canvas platform driver
  235. [ 0.514510] codec:ignore bus ops for cpu=25
  236. [ 0.514517] codec:ignore bus ops for cpu=29
  237. [ 0.514525] codec:register amports ops for bus[0]
  238. [ 0.514532] codec:register amports ops for bus[4]
  239. [ 0.514540] codec:register amports ops for bus[3]
  240. [ 0.514547] codec:register amports ops for bus[2]
  241. [ 0.514554] codec:register amports ops for bus[1]
  242. [ 0.514561] codec:register amports ops for bus[13]
  243. [ 0.514568] codec:register amports ops for bus[2]
  244. [ 0.514575] codec:register amports ops for bus[14]
  245. [ 0.514596] register rdma platform driver
  246. [ 0.514988] vdso: 2 pages (1 code, 1 data) at base ffffffc001c86000
  247. [ 0.515020] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  248. [ 0.515493] DMA: preallocated 256 KiB pool for atomic allocations
  249. [ 0.516691] software IO TLB [mem 0x5c800000-0x5cc00000] (4MB) mapped at [ffffffc05c800000-ffffffc05cbfffff]
  250. [ 0.516704] Serial: AMBA PL011 UART driver
  251. [ 0.516783] hdmitx: system: amhdmitx_init
  252. [ 0.516791] hdmitx: system: Ver: 2014May6
  253. [ 0.516821] tv_vout: tv_init_module
  254. [ 0.516832] tv_vout: major number 254 for disp
  255. [ 0.516840] vout_notify: vout_register_server
  256. [ 0.516847] tv_vout: register tv module server ok
  257. [ 0.516871] codec_mm:codec_mm_module_init
  258. [ 0.516984] gxbb clk HIU base is 0xffffff800005a000
  259. [ 0.516992] gxbb clk ao base is 0xffffff800005c000
  260. [ 0.517028] register mpll_clk_out0 success done
  261. [ 0.517039] register mpll_clk_out1 success done
  262. [ 0.517051] register mpll_clk_out2 success done
  263. [ 0.517212] register sys pll success done
  264. [ 0.517250] clkrate [ xtal ] : 24000000Hz
  265. [ 0.517258] clkrate [ 32Khz ] : 32000Hz
  266. [ 0.517266] clkrate [ clk81 ] : 166666666Hz
  267. [ 0.517273] clkrate [ fixed_pll ] : 2000000000Hz
  268. [ 0.517281] clkrate [ fclk_div2 ] : 1000000000Hz
  269. [ 0.517289] clkrate [ fclk_div3 ] : 666666000Hz
  270. [ 0.517296] clkrate [ fclk_div4 ] : 500000000Hz
  271. [ 0.517304] clkrate [ fclk_div5 ] : 400000000Hz
  272. [ 0.517311] clkrate [ fclk_div7 ] : 285714000Hz
  273. [ 0.517338] gxbb clock initialization complete
  274. [ 0.517444] msr_clk_reg0=ffffff800005e75c,msr_clk_reg2=ffffff800006a764
  275. [ 0.518265] amlogic iomap probe done
  276. [ 0.518496] Init pinux probe!
  277. [ 0.519171] pinmux-gxbb c1109880.pinmux: Probed amlogic pinctrl driver
  278. [ 0.519412] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xb0)
  279. [ 0.519431] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xb0)
  280. [ 0.519492] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xb0)
  281. [ 0.519509] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xb0)
  282. [ 0.519684] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 1536000000
  283. [ 0.520076] codec:codec map io source 0x00000000c1100000,size=1048576 to 0xffffff8000680000
  284. [ 0.520096] codec:codec map io source 0x00000000c8820000,size=65536 to 0xffffff80000a0000
  285. [ 0.520112] codec:codec map io source 0x00000000c883c000,size=8192 to 0xffffff8000094000
  286. [ 0.520140] codec:codec map io source 0x00000000c8100000,size=1048576 to 0xffffff8000800000
  287. [ 0.520158] codec:codec map io source 0x00000000d0100000,size=262144 to 0xffffff8000980000
  288. [ 0.520175] codec:codec map io source 0x00000000c8838000,size=1024 to 0xffffff8000092000
  289. [ 0.520230] codec_mm has 2 memory regions
  290. [ 0.520245] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma ok
  291. [ 0.520258] codec_mm:codec_mm_reserved_init 0000000060b00000->0000000064c00000
  292. [ 0.520270] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_reserved ok
  293. [ 0.520281] codec_mm:codec_mm_probe mem init done
  294. [ 0.520290] codec_mm:add reserve memory 0000000060b00000(aligned 0000000060b00000) size=4100000(aligned 4100000)
  295. [ 0.520318] codec_mm has 2 memory regions
  296. [ 0.520328] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma ok
  297. [ 0.520341] codec_mm:codec_mm_reserved_init 0000000060b00000->0000000064c00000
  298. [ 0.520352] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_reserved ok
  299. [ 0.520363] codec_mm:codec_mm reserved memory probed done
  300. [ 0.520370] codec_mm:codec_mm_probe ok
  301. [ 0.520900] VPU driver version: v01
  302. [ 0.520908] vpu driver detect cpu type: gxbaby
  303. [ 0.520923] load vpu_clk in dts: 666667000Hz(7)
  304. [ 0.520948] vpu_probe OK
  305. [ 0.521119] hdmitx: system: amhdmitx_probe
  306. [ 0.521328] hdmitx hpd irq = 89
  307. [ 0.521514] hdmitx20: Mapped PHY: 0xc0800000
  308. [ 0.521527] hdmitx20: Mapped PHY: 0xc1104400
  309. [ 0.521548] hdmitx20: Mapped PHY: 0xc8100000
  310. [ 0.521557] hdmitx20: Mapped PHY: 0xc8834000
  311. [ 0.521565] hdmitx20: Mapped PHY: 0xc883a000
  312. [ 0.521573] hdmitx20: Mapped PHY: 0xc883c000
  313. [ 0.521586] hdmitx20: Mapped PHY: 0xd0100000
  314. [ 0.521594] hdmitx20: Mapped PHY: 0xda83a000
  315. [ 0.521608] hdmitx: alread display in uboot 0x10
  316. [ 0.521633] avmute set to 1
  317. [ 0.521924] canvas_probe reg=00000000c8838000,size=400
  318. [ 0.521938] canvas maped reg_base =ffffff800009e000
  319. [ 0.525016] rdma_probe
  320. [ 0.551730] bio: create slab <bio-0> at 0
  321. [ 0.720104] raid6: int64x1 534 MB/s
  322. [ 0.890116] raid6: int64x2 845 MB/s
  323. [ 1.060092] raid6: int64x4 1268 MB/s
  324. [ 1.060100] hdmitx: plugin
  325. [ 1.124486] hdmitx: edid: raw data are all zeroes
  326. [ 1.124495] EDID Parser:
  327. [ 1.131050] EDID BlockCount=0
  328. [ 1.131058] hdmitx: edid: HDMI: set default vic
  329. [ 1.131073] hdmitx: video: get current mode: null
  330. [ 1.131080] hdmtix: set audio
  331. [ 1.131092] hdmitx tx_aud_src = 0
  332. [ 1.131120] hdmitx aud_n_para = 24576
  333. [ 1.131141] hdmitx set channel status
  334. [ 1.230079] raid6: int64x8 1414 MB/s
  335. [ 1.400085] raid6: neonx1 935 MB/s
  336. [ 1.570048] raid6: neonx2 1497 MB/s
  337. [ 1.740049] raid6: neonx4 1934 MB/s
  338. [ 1.910061] raid6: neonx8 2032 MB/s
  339. [ 1.910069] raid6: using algorithm neonx8 (2032 MB/s)
  340. [ 1.910077] raid6: using intx1 recovery algorithm
  341. [ 1.910332] SCSI subsystem initialized
  342. [ 1.910476] usbcore: registered new interface driver usbfs
  343. [ 1.910510] usbcore: registered new interface driver hub
  344. [ 1.910569] usbcore: registered new device driver usb
  345. [ 1.910772] media: Linux media interface: v0.10
  346. [ 1.910801] Linux video capture interface: v2.00
  347. [ 1.910849] pps_core: LinuxPPS API ver. 1 registered
  348. [ 1.910858] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  349. [ 1.910877] PTP clock support registered
  350. [ 1.911015] logo: logo_init
  351. [ 1.911059] Advanced Linux Sound Architecture Driver Initialized.
  352. [ 1.911355] Bluetooth: Core ver 2.18
  353. [ 1.911388] NET: Registered protocol family 31
  354. [ 1.911397] Bluetooth: HCI device and connection manager initialized
  355. [ 1.911410] Bluetooth: HCI socket layer initialized
  356. [ 1.911421] Bluetooth: L2CAP socket layer initialized
  357. [ 1.911442] Bluetooth: SCO socket layer initialized
  358. [ 1.911455] NetLabel: Initializing
  359. [ 1.911462] NetLabel: domain hash size = 128
  360. [ 1.911469] NetLabel: protocols = UNLABELED CIPSOv4
  361. [ 1.911503] NetLabel: unlabeled traffic allowed by default
  362. [ 1.912059] Switched to clocksource Timer-E
  363. [ 1.915705] NET: Registered protocol family 2
  364. [ 1.916157] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  365. [ 1.916253] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  366. [ 1.916443] TCP: Hash tables configured (established 16384 bind 16384)
  367. [ 1.916511] TCP: reno registered
  368. [ 1.916522] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  369. [ 1.916562] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  370. [ 1.916729] NET: Registered protocol family 1
  371. [ 1.916886] RPC: Registered named UNIX socket transport module.
  372. [ 1.916896] RPC: Registered udp transport module.
  373. [ 1.916905] RPC: Registered tcp transport module.
  374. [ 1.916913] RPC: Registered tcp NFSv4.1 backchannel transport module.
  375. [ 1.917052] Unpacking initramfs...
  376. [ 2.028706] Freeing initrd memory: 3728K (ffffffc073b8f000 - ffffffc073f33000)
  377. [ 2.031629] kvm [1]: Using HYP init bounce page @5bdee000
  378. [ 2.031771] kvm [1]: interrupt-controller@c4304000 IRQ25
  379. [ 2.031943] kvm [1]: kvm_arch_timer: can't find DT node
  380. [ 2.031975] kvm [1]: error initializing Hyp mode: -19
  381. [ 2.032430] futex hash table entries: 1024 (order: 5, 131072 bytes)
  382. [ 2.032504] audit: initializing netlink subsys (disabled)
  383. [ 2.032540] audit: type=2000 audit(2.030:1): initialized
  384. [ 2.032892] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  385. [ 2.036465] VFS: Disk quotas dquot_6.5.2
  386. [ 2.036599] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  387. [ 2.038039] NFS: Registering the id_resolver key type
  388. [ 2.038071] Key type id_resolver registered
  389. [ 2.038079] Key type id_legacy registered
  390. [ 2.038092] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  391. [ 2.038113] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
  392. [ 2.038961] msgmni has been set to 3433
  393. [ 2.039703] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  394. [ 2.039766] io scheduler noop registered (default)
  395. [ 2.039776] io scheduler deadline registered
  396. [ 2.039799] io scheduler cfq registered
  397. [ 2.040345] meson-rng c8834000.rng: hwrng registered
  398. [ 2.040418] [drm] Initialized drm 1.1.0 20060810
  399. [ 2.040449] mali-utgard d00c0000.mali: max pp is 3
  400. [ 2.040459] mali-utgard d00c0000.mali: min pp is 3
  401. [ 2.040468] mali-utgard d00c0000.mali: min clk is 4
  402. [ 2.040484] mali-utgard d00c0000.mali: hiu io source 0xffffff80000d2000
  403. [ 2.040499] mali-utgard d00c0000.mali: hiu io source 0xffffff80000e8000
  404. [ 2.040509] mali-utgard d00c0000.mali: num of pp used most of time 3
  405. [ 2.040520] mali-utgard d00c0000.mali: clock dvfs table size is 6
  406. [ 2.040530] mali-utgard d00c0000.mali: max clk set 4
  407. [ 2.040538] mali-utgard d00c0000.mali: max clk is 4
  408. [ 2.040548] mali-utgard d00c0000.mali: turbo clk set to 5
  409. [ 2.040557] mali-utgard d00c0000.mali: turbo clk is 5
  410. [ 2.040567] mali-utgard d00c0000.mali: default clk is 4
  411. [ 2.040623] mali-utgard d00c0000.mali: ====================0====================
  412. [ 2.040623] clk_freq= 125000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<30 120>, clk_sample=125
  413. [ 2.040648] mali-utgard d00c0000.mali: ====================1====================
  414. [ 2.040648] clk_freq= 285000000, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285
  415. [ 2.040671] mali-utgard d00c0000.mali: ====================2====================
  416. [ 2.040671] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400
  417. [ 2.040695] mali-utgard d00c0000.mali: ====================3====================
  418. [ 2.040695] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500
  419. [ 2.040718] mali-utgard d00c0000.mali: ====================4====================
  420. [ 2.040718] clk_freq= 666000000, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666
  421. [ 2.040741] mali-utgard d00c0000.mali: ====================5====================
  422. [ 2.040741] clk_freq= 792000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=792
  423. [ 2.041965] gpu cooling register okay with err=0
  424. [ 2.042005] gpu core cooling register okay with err=0
  425. [ 2.042144] Mali: Mali device driver loaded
  426. [ 2.042263] UMP: UMP device driver loaded
  427. [ 2.044394] loop: module loaded
  428. [ 2.044925] mtdoops: mtd device (mtddev=name/number) must be supplied
  429. [ 2.051868] libphy: stmmac: probed
  430. [ 2.051891] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
  431. [ 2.051901] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
  432. [ 2.052217] usbcore: registered new interface driver cdc_ether
  433. [ 2.052272] usbcore: registered new interface driver cdc_ncm
  434. [ 2.052363] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  435. [ 2.052373] ehci-h20ahb: H20AHB-EHCI Host Controller driver
  436. [ 2.052451] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  437. [ 2.052508] usbcore: registered new interface driver cdc_acm
  438. [ 2.052518] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  439. [ 2.052556] usbcore: registered new interface driver usb-storage
  440. [ 2.052582] usbcore: registered new interface driver ums-cypress
  441. [ 2.052610] usbcore: registered new interface driver ums_eneub6250
  442. [ 2.052691] usbcore: registered new interface driver usbserial
  443. [ 2.052717] usbcore: registered new interface driver usbserial_generic
  444. [ 2.052743] usbserial: USB Serial support registered for generic
  445. [ 2.053022] mousedev: PS/2 mouse device common for all mice
  446. [ 2.053239] i2c /dev entries driver
  447. [ 2.053733] ledtrig-cpu: registered to indicate activity on CPUs
  448. [ 2.053780] hidraw: raw HID events driver (C) Jiri Kosina
  449. [ 2.053897] usbcore: registered new interface driver usbhid
  450. [ 2.053906] usbhid: USB HID core driver
  451. [ 2.054024] ==uart0 reg addr = ffffff80002244c0
  452. [ 2.054050] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
  453. [ 3.817466] console [ttyS0] enabled
  454. [ 3.821071] ==uart1 reg addr = ffffff80002264c0
  455. [ 3.825411] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
  456. [ 3.834718] enter cpufreq
  457. [ 3.837219] probe cpufreq okay
  458. [ 3.881307] dwc_otg: usb1: type: 1 speed: 0, config: 0, dma: 0, id: 1, phy: c0000020, ctrl: 0
  459. [ 3.886790] dwc_otg: Core Release: 3.10a
  460. [ 3.888054] dwc_otg: Setting default values for core params
  461. [ 3.893590] dwc_otg: curmode: 1, host_only: 1
  462. [ 3.900065] dwc_otg: Using Buffer DMA mode
  463. [ 3.901939] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
  464. [ 3.907035] dwc_otg: Working on port type = HOST
  465. [ 3.911710] dwc_otg dwc2_b: DWC OTG Controller
  466. [ 3.916015] dwc_otg dwc2_b: new USB bus registered, assigned bus number 1
  467. [ 3.922748] dwc_otg dwc2_b: irq 63, io mem 0x00000000
  468. [ 3.927727] dwc_otg: -------hcd->flags.d32 = 0
  469. [ 3.932149] dwc_otg: Init: Port Power? op_state=1
  470. [ 3.936782] dwc_otg: Init1: Power Port (0)
  471. [ 3.941247] hub 1-0:1.0: USB hub found
  472. [ 3.944577] hub 1-0:1.0: 1 port detected
  473. [ 3.948576] dwc_otg: usb0: type: 0 speed: 0, config: 0, dma: 0, id: 0, phy: c0000000, ctrl: 0
  474. [ 3.969443] dwc_otg: Core Release: 3.10a
  475. [ 3.969465] dwc_otg: Setting default values for core params
  476. [ 3.973264] dwc_otg: curmode: 1, host_only: 0
  477. [ 3.981738] dwc_otg: Using Buffer DMA mode
  478. [ 3.981759] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
  479. [ 3.986712] dwc_otg: Working on port type = OTG
  480. [ 3.991189] dwc_otg: Current port type: SLAVE
  481. [ 3.995580] dwc_otg dwc2_a: DWC OTG Controller
  482. [ 3.999910] dwc_otg dwc2_a: new USB bus registered, assigned bus number 2
  483. [ 4.006645] dwc_otg dwc2_a: irq 62, io mem 0x00000000
  484. [ 4.011932] hub 2-0:1.0: USB hub found
  485. [ 4.015381] hub 2-0:1.0: 1 port detected
  486. [ 4.019320] dwc_otg: Dedicated Tx FIFOs mode
  487. [ 4.023605] dwc_otg: using timer detectid change, ffffffc05bffa000
  488. [ 4.029815] BLASTER Driver Init
  489. [ 4.032789] secmon has 1 memory regions
  490. [ 4.036487] secmon: share in base: 0xffffff8000234000, share out base: 0xffffff8000236000
  491. [ 4.044629] secmon secmon: assigned reserved memory node linux,secmon ok
  492. [ 4.051219] secmon: probe done
  493. [ 4.054331] storage: storage in base: 0xffffff8001780000
  494. [ 4.059499] storage: storage out base: 0xffffff8001800000
  495. [ 4.064854] storage: storage block base: 0xffffff8001880000
  496. [ 4.070366] storage: probe done!
  497. [ 4.073609] Error: Driver 'ICPlus IP175C' is already registered, aborting...
  498. [ 4.080545] libphy: ICPlus IP175C: Error -16 in registering driver
  499. [ 4.087129] aml_sd_emmc_probe: line 2954
  500. [ 4.090550] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  501. [ 4.100088] aml_sd_emmc_reg_init 677
  502. [ 4.103411] pdata->caps 60007
  503. [ 4.106248] pdata->caps2 0
  504. [ 4.108922] get property: ocr_avail, value:0x00200080
  505. [ 4.115253] get property: f_min, value:0x00061a80
  506. [ 4.121514] get property: f_max, value:0x0510ff40
  507. [ 4.127817] get property: max_req_size, value:0x00020000
  508. [ 4.134113] get property: irq_in, value:0x00000003
  509. [ 4.140403] get property: irq_out, value:0x00000005
  510. [ 4.146716] get property: power_level, value:0x00000001
  511. [ 4.146754] dwc_otg: Indeed it is in host mode hprt0 = 00021501
  512. [ 4.158875] get property: gpio_cd, str:
  513. [ 4.164130] get property: gpio_power, str:
  514. [ 4.169382] get property: pinname, str:sd
  515. [ 4.174824] get property: jtag_pin, str:
  516. [ 4.180077] get property: card_type, value:0x00000005
  517. [ 4.186381] get property: gpio_dat3, str:
  518. [ 4.191637] get property: gpio_volsw, str:
  519. [ 4.272155] [aml_is_card_insert] card IN
  520.  
  521. [ 4.322088] usb 1-1: new high-speed USB device number 2 using dwc_otg
  522. [ 4.323223] normal card in
  523. [ 4.323287] dwc_otg: Indeed it is in host mode hprt0 = 00001101
  524. [ 4.331646] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  525. [ 4.337215] aml_sd_emmc_probe: line 2954
  526. [ 4.341464] aml_sd_emmc_reg_init 677
  527. [ 4.344703] pdata->caps 80000d47
  528. [ 4.347805] pdata->caps2 80a1
  529. [ 4.350733] get property: ocr_avail, value:0x00200080
  530. [ 4.357034] [aml_is_card_insert] card IN
  531. [ 4.357034]
  532. [ 4.357034] get property: f_min, value:0x00061a80
  533. [ 4.369885] get property: f_max, value:0x05f5e100
  534. [ 4.376181] get property: max_req_size, value:0x00020000
  535. [ 4.382480] get property: pinname, str:emmc
  536. [ 4.388078] get property: card_type, value:0x00000001
  537. [ 4.394382] get property: gpio_dat3, str:
  538. [ 4.399636] get property: hw_reset, str:
  539. [ 4.462072] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  540. [ 4.462074] aml_emmc_hw_reset 1356
  541. [ 4.465598] ion_dev has 1 memory regions
  542. [ 4.474235] [aml_sd_emmc_irq] emmc: resp_timeout,vstat:0x2800,virqc:3fff
  543.  
  544. [ 4.477191] aml_sd_emmc_data_thread 2211 emmc: cmd:1
  545. [ 4.482312] emmc: error -110 whilst initialising MMC card
  546. [ 4.482423] fb: osd_init_module
  547. [ 4.482494] fb: viu vsync irq: 35
  548. [ 4.482500] meson-fb has 1 memory regions
  549. [ 4.483859] meson-fb meson-fb: assigned reserved memory node linux,meson-fb ok
  550. [ 4.483873] tv_vout: tv_set_current_vmode[696]fps_target_mode=12
  551. [ 4.483877] tv_vout: mode is 12,sync_duration_den=1,sync_duration_num=60
  552. [ 4.483885] switch_vpu_mem_pd: vencp ON
  553. [ 4.483891] tv_vout: TV mode 1080p60hz selected.
  554. [ 4.483899] tv_vout: new mode =1080p60hz set ok
  555. [ 4.483900] vout_serve: vinfo mode is: 1080p60hz
  556. [ 4.483906] switch_vpu_mem_pd: viu_osd1 ON
  557. [ 4.483909] switch_vpu_mem_pd: viu_osd2 ON
  558. [ 4.483912] switch_vpu_mem_pd: viu_osd_scale ON
  559. [ 4.547889] osd_rdma: osd_rdma_init: rmda_table p=0x60049000,op=0x60049000 , v=0xffffff800027b000
  560. [ 4.556550] fb: osd_probe vinfo:ffffffc001cf68b0
  561. [ 4.561104] fb: Frame buffer memory assigned at
  562. [ 4.565432] fb: phy: 0x78000000, vir:0xffffff8003c00000, size=98304K
  563. [ 4.572241] fb: osd_set_res_bootargs : mode 66
  564. [ 4.576628] fb: osd_set_res_bootargs, no available resolution info.
  565. [ 4.582681] fb: fb def : 1920 1080 1920 2160 32
  566. [ 4.587323] fb: init fbdev bpp is:32
  567. [ 4.590860] fb: ---------------clear fb0 memory
  568. [ 4.593872] hub 1-1:1.0: USB hub found
  569. [ 4.594163] hub 1-1:1.0: 4 ports detected
  570. [ 4.630359] fb: osd[0] canvas.idx =0x40
  571. [ 4.630360] fb: osd[0] canvas.addr=0x78000000
  572. [ 4.630362] fb: osd[0] canvas.width=7680
  573. [ 4.630363] fb: osd[0] canvas.height=2160
  574. [ 4.655674] Console: switching to colour frame buffer device 240x67
  575. [ 4.702039] fb: Frame buffer memory assigned at
  576. [ 4.702133] fb: phy: 0x7e000000, vir:0xffffff8001a00000, size=1024K
  577. [ 4.718643] fb: osd probe OK
  578. [ 4.718806] vout_serve: vout_init_module
  579. [ 4.719892] vout_serve: meson_vout_probe
  580. [ 4.723728] vout_serve: create vout attribute OK
  581. [ 4.728322] ge2d: ge2d_init_module
  582. [ 4.731645] ge2d: ge2d_dev major:241
  583. [ 4.735313] ge2d: ge2d clock is 400 MHZ
  584. [ 4.738973] ge2d: ge2d: pdev=ffffffc05da27200, irq=182, rstc=0xffffffc05b846700, clk=ffffffc05d937c00
  585. [ 4.748144] ge2d: mapped phy: 0xd0160000
  586. [ 4.752001] ge2d: ge2d start monitor
  587. [ 4.755617] ge2d: ge2d workqueue monitor start
  588. [ 4.755687] codec:Amlogic A/V streaming port init
  589. [ 4.756299] codec:get gate demux control ok ffffffc05bfcf000
  590. [ 4.756303] codec:get gate parser_top control ok ffffffc05bfcf100
  591. [ 4.756307] codec:get gate vpu_intr control ok ffffffc05bfcf200
  592. [ 4.756312] codec:get gate vdec control ok ffffffc05bfcf300
  593. [ 4.756467] codec:[tsync_pcr_init]init success.
  594. [ 4.756503] codec:regist mpeg12 codec profile
  595. [ 4.756538] codec:regist mpeg4 codec profile
  596. [ 4.756539] codec:amvdec_vc1 module init
  597. [ 4.756571] codec:regist vc1 codec profile
  598. [ 4.756573] codec:amvdec_h264 module init
  599. [ 4.756620] codec:regist h264 codec profile
  600. [ 4.756622] codec:amvdec_h264mvc module init
  601. [ 4.756650] codec:regist hmvc codec profile
  602. [ 4.756651] codec:amvdec_h264_4k2k module init
  603. [ 4.756684] codec:regist h264_4k2k codec profile
  604. [ 4.756686] codec:amvdec_h265 module init
  605. [ 4.756714] codec:regist hevc codec profile
  606. [ 4.756744] codec:regist mjpeg codec profile
  607. [ 4.756745] codec:amvdec_real module init
  608. [ 4.756780] codec:regist real codec profile
  609. [ 4.756785] codec:amvdec_avs module init
  610. [ 4.756814] codec:regist avs codec profile
  611. [ 4.756853] amvenc_avc_probe -- reserved memory config fail.
  612. [ 4.756855] amvenc_avc - cma memory pool size: 32 MB
  613. [ 4.756873] encode_wq_init.
  614. [ 4.756877] encode start monitor.
  615. [ 4.757017] jpegenc module init
  616. [ 4.757112] codec:picdec_driver_probe called.
  617. [ 4.757114] picdec has 1 memory regions
  618. [ 4.757144] picdec picdec: assigned reserved memory node linux,picdec ok
  619. [ 4.757145] codec:picdec_driver_probe done.
  620. [ 4.757147] codec:reserved memory config fail , use CMA .
  621. [ 4.760683] codec:cma memory is 64c00000 , size is 3000000
  622. [ 4.761012] codec:0 addr is 64c00000################
  623. [ 4.761021] codec:1 addr is 64efd000################
  624. [ 4.761172] switch_vpu_mem_pd: vpu_arb ON
  625. [ 4.761398] codec:create_ge2d_work_queue video task ok
  626. [ 4.761572] encode workqueue monitor start.
  627. [ 4.761670] codec:register clk_set_setting cpu[31]
  628. [ 4.761985] di_module_init ok.
  629. [ 4.761989] di_module_init: major 237
  630. [ 4.762218] di_probe
  631. [ 4.762319] deinterlace has 1 memory regions
  632. [ 4.762353] di reveser memory 0x76200000, size 30MB.
  633. [ 4.762362] deinterlace deinterlace: assigned reserved memory node linux,di ok
  634. [ 4.762523] rdma_register, rdma_table_addr ffffff800027d000 rdma_table_addr_phy 6004e000 reg_buf ffffffc05b880000
  635. [ 4.762525] rdma_register success, handle 1 table_size 8192
  636. [ 4.762528] di_probe allocate rdma channel 1.
  637. [ 4.762531] DI hw version 2.
  638. [ 4.762544] 0x000000c3:Y=c3,U=0,V=0
  639. [ 4.762546] 0x000000c4:Y=c4,U=0,V=0
  640. [ 4.762547] 0x000000c5:Y=c5,U=0,V=0
  641. [ 4.762549] 0x000000c6:Y=c6,U=0,V=0
  642. [ 4.762550] 0x000000c7:Y=c7,U=0,V=0
  643. [ 4.762552] 0x000000c8:Y=c8,U=0,V=0
  644. [ 4.762553] 0x000000c9:Y=c9,U=0,V=0
  645. [ 4.762556] 0x000000ca:Y=ca,U=0,V=0
  646. [ 4.762558] 0x000000cb:Y=cb,U=0,V=0
  647. [ 4.762560] 0x000000cc:Y=cc,U=0,V=0
  648. [ 4.762562] 0x000000cd:Y=cd,U=0,V=0
  649. [ 4.762563] 0x000000ce:Y=ce,U=0,V=0
  650. [ 4.762565] 0x000000cf:Y=cf,U=0,V=0
  651. [ 4.762693] di_probe here.
  652. [ 4.762708] switch_vpu_mem_pd: di_pre OFF
  653. [ 4.762887] efusekeynum: 4
  654. [ 4.762895] efusekeyname: mac offset: 0 size: 6
  655. [ 4.762901] efusekeyname: mac_bt offset: 6 size: 6
  656. [ 4.762907] efusekeyname: mac_wifi offset: 12 size: 6
  657. [ 4.762917] efusekeyname: usid offset: 18 size: 16
  658. [ 4.763008] efuse efuse: probe OK!
  659. [ 4.763129] 6aml_unifykeys_init done!
  660. [ 4.763130] ppmgr module init func called
  661. [ 4.763169] ppmgr_driver_probe called
  662. [ 4.763172] ppmgr has 1 memory regions
  663. [ 4.763182] init ppmgr memsource 74200000->761fffff
  664. [ 4.763293] ppmgr_probe done
  665. [ 4.763489] ionvideo-000: V4L2 device registered as video13
  666. [ 4.763499] [dsp]register dsp to char divece(257)
  667. [ 4.763772] amaudio: driver amaudio succuess!
  668. [ 4.763777] amlvideo_init called
  669. [ 4.763778] amlvideo_create_instance called
  670. [ 4.763780] v4l2_dev.name=:amlvideo-000
  671. [ 4.763849] amlvideo-000: V4L2 device registered as video10
  672. [ 4.763851]
  673. [ 4.763851]
  674. [ 4.763851] VECM init
  675. [ 4.763851]
  676. [ 4.764118] saradc c1108680.saradc: initialized by BL30
  677. [ 4.764122] saradc c1108680.saradc: calibration start:
  678. [ 4.764173] saradc c1108680.saradc: nominal=0, value=5
  679. [ 4.764218] saradc c1108680.saradc: nominal=256, value=252
  680. [ 4.764263] saradc c1108680.saradc: nominal=512, value=507
  681. [ 4.764311] saradc c1108680.saradc: nominal=768, value=763
  682. [ 4.764356] saradc c1108680.saradc: nominal=1023, value=1019
  683. [ 4.764359] saradc c1108680.saradc: calibration end: coef=4104
  684. [ 4.764396] remote: Driver init
  685. [ 4.764719] aml-thermal aml-sensor@0: min state:500000 400 1 2
  686. [ 4.764920] aml-thermal aml-sensor@0: not found gpucore node
  687. [ 4.764928] aml-thermal aml-sensor@0: gpu coef:437, pp:3
  688. [ 4.769971] aml-thermal aml-sensor@0: cdev1 set upper to 3
  689. [ 4.769974] aml-thermal aml-sensor@0: cdev2 set upper to 3
  690. [ 4.769977] aml-thermal aml-sensor@0: cdev0 set upper to 3
  691. [ 4.772849] input: cec_input as /devices/virtual/input/input0
  692. [ 4.773074] cectx c810023c.aocec: aml_cec_probe(): can't find hdmirx
  693. [ 4.773887] 6--------------------------------------------------------
  694. [ 4.773889] 6odroid_sysfs_init(321) : Sleep Enable !!
  695. [ 4.773890] 6--------------------------------------------------------
  696. [ 4.774018] input: vt-input as /devices/virtual/input/input1
  697. [ 4.776330] 6Virtual-Key input driver registered!!
  698. [ 4.776757] adbattery: android dummy battery driver loaded
  699. [ 4.777139] enter aml_soc_platform_pcm2bt_probe
  700. [ 4.777371] divider=16,frac=33920000,SDMval=4523
  701. [ 4.777481] enter aml_pcm_dai_probe
  702. [ 4.777517] [aml-spdif-dai]enter aml_dai_spdif_init
  703. [ 4.777566] aml_spdif_probe
  704. [ 4.777657] enter spdif_dit_probe
  705. [ 4.778273] odroid_hdmi_snd odroid_hdmi: dit-hifi <-> I2S mapping ok
  706. [ 4.778913] GACT probability on
  707. [ 4.778923] Mirror/redirect action on
  708. [ 4.778925] u32 classifier
  709. [ 4.778926] Performance counters on
  710. [ 4.778927] input device check on
  711. [ 4.778928] Actions configured
  712. [ 4.779024] TCP: cubic registered
  713. [ 4.779362] NET: Registered protocol family 10
  714. [ 4.780058] mip6: Mobile IPv6
  715. [ 4.780065] NET: Registered protocol family 17
  716. [ 4.780079] NET: Registered protocol family 15
  717. [ 4.780115] Bridge firewalling registered
  718. [ 4.780184] Bluetooth: RFCOMM TTY layer initialized
  719. [ 4.780192] Bluetooth: RFCOMM socket layer initialized
  720. [ 4.780222] Bluetooth: RFCOMM ver 1.11
  721. [ 4.780228] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  722. [ 4.780229] Bluetooth: BNEP filters: protocol multicast
  723. [ 4.780235] Bluetooth: BNEP socket layer initialized
  724. [ 4.780237] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  725. [ 4.780242] Bluetooth: HIDP socket layer initialized
  726. [ 4.780289] NET: Registered protocol family 35
  727. [ 4.780333] Key type dns_resolver registered
  728. [ 4.780808] Registering SWP/SWPB emulation handler
  729. [ 4.781093] registered taskstats version 1
  730. [ 4.781677] bio: create slab <bio-1> at 1
  731. [ 4.782169] Btrfs loaded
  732. [ 4.782248] regulator-dummy: disabling
  733. [ 4.782581] Mali DRM initialize, driver name: mali_drm, version 2.1
  734. [ 4.782737] [drm] Initialized mali_drm 2.1.1 20140306 on minor 0
  735. [ 4.782746] Mali DRM initialize, driver name: mali_drm, version 2.1
  736. [ 4.782832] [drm] Initialized mali_drm 2.1.1 20140306 on minor 1
  737. [ 4.782919] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  738. [ 4.783863] 6enter meson_pm_probe!
  739. [ 4.783922] meson_pm_probe done
  740. [ 4.784142] ALSA device list:
  741. [ 4.784143] #0: ODROID-HDMI
  742. [ 5.444439] Freeing unused kernel memory: 576[ (ffffffc001bef000 - ffffffc101c7f000)
  743. [ 5.483234] sd: new high speed SDHC card at address 0001
  744. [ 5.486569] random: systemd-tmpfile: uninitialized urandom read (16 bytes read, 128 bits of entropy available)
  745. [ 5.490522] random: nonblocking pool is initialized
  746. [ 5.501276] sd: clock 50000000, 4-bit-bus-width
  747. [ 5.501575] mmcblk0: sd:0001 00000 29.7 GiB
  748.  
  749. [ 5.510088] mmcblk0: p1
  750. [ 5.962668] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  751. [ 6.383557] systemd[1]: System time before build time, advancing clock.
  752. [ 6.418648] switch_vpu_mem_pd: viu_vd1 OFF
  753. [ 6.422416] switch_vpu_mem_pd: afbc_dec OFF
  754. [ 6.426095] switch_vpu_mem_pd: di_post OFF
  755. [ 6.429736] switch_vpu_mem_pd: viu_vd2 OFF
  756. [ 6.471201] ip_tables: (C) 2000-2006 Netfilter Core Team
  757. [ 6.490613] systemd[1]: systemd 231 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  758. [ 6.507357] systemd[1]: Detected architecture arm64.
  759. [ 6.526650] systemd[1]: Set hostname to <alarm>.
  760. [ 6.885874] systemd[1]: Listening on LVM2 metadata daemon socket.
  761. [ 6.895167] systemd[1]: Listening on Journal Socket (/dev/log).
  762. [ 6.904091] systemd[1]: Listening on udev Kernel Socket.
  763. [ 6.912840] systemd[1]: Reached target Swap.
  764. [ 6.921689] systemd[1]: Listening on Journal Socket.
  765. [ 6.930713] systemd[1]: Listening on udev Control Socket.
  766. [ 6.940125] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  767. [ 6.955793] systemd[1]: Listening on Process Core Dump Socket.
  768. [ 6.965862] systemd[1]: Listening on Network Service Netlink Socket.
  769. [ 6.976467] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  770. [ 6.988725] systemd[1]: Reached target Encrypted Volumes.
  771. [ 6.999112] systemd[1]: Listening on Device-mapper event daemon FIFOs.
  772. [ 7.010316] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  773. [ 7.023239] systemd[1]: Created slice System Slice.
  774. [ 7.043995] systemd[1]: Mounting Temporary Directory...
  775. [ 7.056442] systemd[1]: Mounting POSIX Message Queue File System...
  776. [ 7.074473] systemd[1]: Starting Journal Service...
  777. [ 7.086903] systemd[1]: Starting Remount Root and Kernel File Systems...
  778. [ 7.110434] systemd[1]: Starting Apply Kernel Variables...
  779. [ 7.122654] systemd[1]: Mounting Configuration File System...
  780. [ 7.134866] systemd[1]: Mounting Huge Pages File System...
  781. [ 7.147211] systemd[1]: Mounting Debug File System...
  782. [ 7.160030] systemd[1]: Starting Setup Virtual Console...
  783. [ 7.183695] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  784. [ 7.199663] systemd[1]: Reached target Remote File Systems.
  785. [ 7.211173] systemd[1]: Created slice User and Session Slice.
  786. [ 7.222476] systemd[1]: Reached target Slices.
  787. [ 7.233842] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  788. [ 7.246589] systemd[1]: Created slice system-serial\x2dgetty.slice.
  789. [ 7.258179] systemd[1]: Created slice system-getty.slice.
  790. [ 7.268976] systemd[1]: Reached target Paths.
  791. [ 7.282604] systemd[1]: Mounted Debug File System.
  792. [ 7.293578] systemd[1]: Mounted POSIX Message Queue File System.
  793. [ 7.304721] systemd[1]: Mounted Configuration File System.
  794. [ 7.315520] systemd[1]: Mounted Huge Pages File System.
  795. [ 7.326407] systemd[1]: Mounted Temporary Directory.
  796. [ 7.337496] systemd[1]: Started Journal Service.
  797. [ 7.435296] systemd-journald[145]: Received request to flush runtime journal from PID 1
  798. [ 10.131001] Driver for 1-wire Dallas network protocol.
  799. [ 10.145566] ionvideo open
  800. [ 10.342078] ionvideo_stop_generating!!!!
  801. [ 10.346243] ionvideo release
  802. [ 10.760582] vout_serve: vmode set to 1080p60hz
  803. [ 10.760582]
  804. [ 10.769429] vout_serve: don't set the same mode as current.
  805. [ 10.823749] vout_serve: vmode set to 1080p60hz
  806. [ 10.823749]
  807. [ 10.832180] vout_serve: don't set the same mode as current.
  808. [ 10.837108] fb: osd0 free scale DISABLE
  809. [ 10.993629] A link change request failed with some changes committed already. Interface eth0 may have been left with an inconsistent configuration, please check.
  810.  
  811. Arch Linux 3.14.79-3-ARCH (ttyS0)
  812.  
  813. alarm login: [ 14.982312] libphy: stmmac-0:00 - Link is Up - 1000/Full
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!