Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- HELLO! BOOT0 is starting!
- boot0 version : 2.0.0
- read dram para.
- dram driver version: 1.15
- dram size =1024MB
- 0xffffffff
- super_standby_flag = 0
- Succeed in opening nand flash.
- block from 2 to 6
- deal block 2
- Succeed in reading Boot1 file head.
- The size of Boot1 is 0x00068000.
- The file stored in 0x00000000 of block 2 is perfect.
- Check is correct.
- Ready to disable icache.
- Succeed in loading Boot1.
- Jump to Boot1.
- [ 0.165] boot1 version : 2.0.0
- [ 0.165] script installed early ok
- [ 0.166] pmu type = 3
- [ 0.271] bat vol = 1681 mv
- [ 0.284] axi:ahb:apb=4:2:2
- [ 0.284] set dcdc2=1400mv, clock=912M successed
- [ 0.287] key
- [ 0.299] no key found
- [ 0.299] flash init start
- [ 0.299] NB1 : enter NFB_Init
- [ 0.302] NB1 : enter phy init
- [ 0.305] [NAND] nand driver(A20) version: 0x0x00000002, 0x0x00000012, data: 0x426fff64 1111692733
- [ 0.314] set retry default value: [ 0.317] 0x00000020[ 0.320] 0x00000020[ 0.322] 0x00000073[ 0.324] 0x000000c0[ 0.327]
- [ 0.328] get the good blk ratio from hwscan : 870
- [ 0.333] NB1 : nand phy init ok
- [ 1.093] _RepairLogBlkTbl start
- [ 1.095] Log Block Index 0x00000000, LogicBlockNum: 0x00000006, LogBlockType: 0x00000000
- [ 1.099] log0: 0x00000080, Log1: 0x0000ffff, WriteIndex: 0x00000000
- [ 1.106] datablock: 0x0000009a, lastusedpage: 0x00000062
- [ 1.114] Log Block Index 0x00000001, LogicBlockNum: 0x00000135, LogBlockType: 0x00000000
- [ 1.120] log0: 0x0000009b, Log1: 0x0000ffff, WriteIndex: 0x00000000
- [ 1.126] datablock: 0x00000092, lastusedpage: 0x00000001
- [ 1.134] Log Block Index 0x00000002, LogicBlockNum: 0x00000005, LogBlockType: 0x00000000
- [ 1.140] log0: 0x000000a7, Log1: 0x0000ffff, WriteIndex: 0x00000000
- [ 1.147] datablock: 0x0000003a, lastusedpage: 0x00000002
- [ 1.155] Log Block Index 0x00000003, LogicBlockNum: 0x00000148, LogBlockType: 0x00000000
- [ 1.161] log0: 0x000000ab, Log1: 0x0000ffff, WriteIndex: 0x00000000
- [ 1.167] datablock: 0x00000077, lastusedpage: 0x00000001
- [ 1.175] Log Block Index 0x00000004, LogicBlockNum: 0x00000142, LogBlockType: 0x00000000
- [ 1.182] log0: 0x000000ac, Log1: 0x0000ffff, WriteIndex: 0x00000000
- [ 1.188] datablock: 0x000000bc, lastusedpage: 0x00000001
- [ 1.196] Log Block Index 0x00000005, LogicBlockNum: 0x0000015a, LogBlockType: 0x00000000
- [ 1.202] log0: 0x000000cd, Log1: 0x0000ffff, WriteIndex: 0x00000000
- [ 1.209] datablock: 0x000000b5, lastusedpage: 0x00000001
- [ 1.216] Log Block Index 0x00000006, LogicBlockNum: 0x000001b4, LogBlockType: 0x00000000
- [ 1.223] log0: 0x000000a5, Log1: 0x0000ffff, WriteIndex: 0x00000000
- [ 1.229] datablock: 0x0000019c, lastusedpage: 0x00000051
- [ 1.237] Log Block Index 0x00000007, LogicBlockNum: 0x0000000e, LogBlockType: 0x00000000
- [ 1.243] log0: 0x000001fe, Log1: 0x0000ffff, WriteIndex: 0x00000000
- [ 1.250] datablock: 0x00000065, lastusedpage: 0x00000074
- [ 1.257] Log Block Index 0x00000008, LogicBlockNum: 0x00000163, LogBlockType: 0x00000000
- [ 1.264] log0: 0x000001ff, Log1: 0x0000ffff, WriteIndex: 0x00000000
- [ 1.271] datablock: 0x000000de, lastusedpage: 0x00000026
- [ 1.279] Log Block Index 0x00000009, LogicBlockNum: 0x00000143, LogBlockType: 0x00000000
- [ 1.285] log0: 0x0000020d, Log1: 0x0000ffff, WriteIndex: 0x00000000
- [ 1.291] datablock: 0x00000139, lastusedpage: 0x00000001
- [ 1.299] Log Block Index 0x0000000a, LogicBlockNum: 0x00000134, LogBlockType: 0x00000000
- [ 1.305] log0: 0x00000333, Log1: 0x0000ffff, WriteIndex: 0x00000000
- [ 1.312] datablock: 0x000000a4, lastusedpage: 0x00000001
- [ 1.320] Log Block Index 0x0000000b, LogicBlockNum: 0x000001b3, LogBlockType: 0x00000000
- [ 1.326] log0: 0x00000344, Log1: 0x0000ffff, WriteIndex: 0x00000000
- [ 1.332] datablock: 0x000000b7, lastusedpage: 0x00000008
- [ 1.340] Log Block Index 0x0000000c, LogicBlockNum: 0x00000137, LogBlockType: 0x00000000
- [ 1.347] log0: 0x000001a6, Log1: 0x0000ffff, WriteIndex: 0x00000000
- [ 1.353] datablock: 0x00000345, lastusedpage: 0x00000002
- [ 1.361] Log Block Index 0x0000000d, LogicBlockNum: 0x00000004, LogBlockType: 0x00000000
- [ 1.367] log0: 0x0000020b, Log1: 0x0000ffff, WriteIndex: 0x00000000
- [ 1.374] datablock: 0x00000370, lastusedpage: 0x0000000f
- [ 1.381] Log Block Index 0x0000000e, LogicBlockNum: 0x000001a4, LogBlockType: 0x00000000
- [ 1.388] log0: 0x000000a8, Log1: 0x0000ffff, WriteIndex: 0x00000000
- [ 1.394] datablock: 0x000003a4, lastusedpage: 0x00000014
- [ 1.402] Log Block Index 0x0000000f, LogicBlockNum: 0x00000000, LogBlockType: 0x00000000
- [ 1.408] log0: 0x000003e4, Log1: 0x0000ffff, WriteIndex: 0x00000000
- [ 1.415] datablock: 0x00000388, lastusedpage: 0x00000040
- [ 1.421] _RepairLogBlkTbl end
- [ 1.435] nand part 0 sec count is not align
- [ 1.435] nand part 4 start sec is not align
- [ 1.438] nand part 0 sec count is not align
- [ 1.443] nand part 4 start sec is not align
- [ 1.447] nand part 865 sec count is not align
- [ 1.452] NB1 : init ok
- [ 1.455] flash init finish
- [ 1.459] fs init ok
- [ 1.461] fattype FAT12
- [ 1.462] fs mount ok
- [ 1.466] nand good_block_ratio=870
- [ 1.468] storage_type=0
- [ 1.481] 0
- [ 1.495] can't find c:\drv_hdmi.drv
- [ 1.495] ERR: wBoot_driver_install display driver failed
- [ 1.499] key value = 0
- [ 1.502] recovery key high 40, low 4
- [ 1.506] show pic finish
- [ 1.508] load kernel start
- [ 1.530] load kernel successed
- [ 1.530] start address = 0x4a000000
- [ 1.532] [LOGICCTL_ERR] LML_Read, the addr of read(start:0x0078afa3, cnt:0x00000000) is beyond the disk volume 0x006cc000!!!
- [ 1.543] [LOGICCTL_ERR] LML_Write, invalid bufaddr: 0x0x3094f8d7
- [ 1.550] ERR: display driver not open yet
- [ 1.554] jump to
- [ 1.556] set retry default value: [ 1.560] 0x00000020[ 1.562] 0x00000020[ 1.564] 0x00000073[ 1.566] 0x000000c0[ 1
- U-Boot 2011.09-rc1-00000-gf75abad (Aug 15 2013 - 08:47:58) Allwinner Technology
- CPU: SUNXI Family
- Board: SUN7I-EVB
- DRAM: 1 GiB
- NAND: NB1 : enter NFB_Init
- [NAND] nand driver(b) version: 0x2, 0x12, data: 20130526
- [NAND] set nand_good_block_ratio 870
- NB1 : nand phy init ok
- nand part 2048 sec count is not align
- nand part 2048 start sec is not align
- nand part 512 sec count is not align
- nand part 2560 start sec is not align
- nand part 5632 sec count is not align
- NB1 : init ok
- 3480 MiB
- Using default environment
- In: serial
- Out: serial
- Err: serial
- --------fastboot partitions--------
- -total partitions:3-
- -name- -start- -size-
- bootloader : 8000 800
- boot : 8800 200
- linux : 8a00 6c3600
- -----------------------------------
- no misc partition is found
- Hit any key to stop autoboot: 0
- ** File not found /boot/uEnv.txt **
- reading /uEnv.txt
- ** Unable to read "/uEnv.txt" from nand 0:0 **
- ## Warning: defaulting to text format
- 53476 bytes read in 16 ms (3.2 MiB/s)
- 4596160 bytes read in 317 ms (13.8 MiB/s)
- ## Booting kernel from Legacy Image at 48000000 ...
- Image Name: Linux-3.4.90+
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 4596096 Bytes = 4.4 MiB
- Load Address: 40008000
- Entry Point: 40008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- OK
- Using machid 0x10bb from environment
- Starting kernel ...
- <6>Booting Linux on physical CPU 0
- <6>Initializing cgroup subsys cpuset
- <6>Initializing cgroup subsys cpu
- <5>Linux version 3.4.90+ (root@debian) (gcc version 4.7.1 (Debian 4.7.1-7) ) #11 SMP PREEMPT Wed Aug 20 08:20:32 EEST 2014
- CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- Machine: sun7i
- <6>Memory Reserved:
- <6> SYS : 0x43000000 - 0x4300ffff ( 64 kB)
- <6> VE : 0x44000000 - 0x48ffffff ( 80 MB)
- <6> G2D : 0x49000000 - 0x49ffffff ( 16 MB)
- <6> LCD : 0x4a000000 - 0x4bffffff ( 32 MB)
- Memory policy: ECC disabled, Data cache writealloc
- <6>sunxi: Allwinner A20 (AW1651/sun7i) detected.
- <7>On node 0 totalpages: 262144
- <7>free_area_init_node: node 0, pgdat c088f180, node_mem_map d0000000
- <7> DMA zone: 512 pages used for memmap
- <7> DMA zone: 0 pages reserved
- <7> DMA zone: 65024 pages, LIFO batch:15
- <7> Normal zone: 1008 pages used for memmap
- <7> Normal zone: 128016 pages, LIFO batch:31
- <7> HighMem zone: 528 pages used for memmap
- <7> HighMem zone: 67056 pages, LIFO batch:15
- <6>PERCPU: Embedded 7 pages/cpu @d0808000 s7616 r8192 d12864 u32768
- <7>pcpu-alloc: s7616 r8192 d12864 u32768 alloc=8*4096<c>
- <7>pcpu-alloc: <c>[0] <c>0 <c>[0] <c>1 <c>
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
- <5>Kernel command line: console=ttyS0,115200 root=/dev/nand3 loglevel=8
- <6>PID hash table entries: 4096 (order: 2, 16384 bytes)
- <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>allocated 2097152 bytes of page_cgroup
- <6>please try 'cgroup_disable=memory' option if you don't want memory cgroups
- <6>Memory: 1024MB = 1024MB total
- <5>Memory: 895672k/895672k available, 152904k reserved, 270336K highmem
- <5>Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- .text : 0xc0008000 - 0xc07e8a54 (8067 kB)
- .init : 0xc07e9000 - 0xc0828dc0 ( 256 kB)
- .data : 0xc082a000 - 0xc0896330 ( 433 kB)
- .bss : 0xc0896354 - 0xc0a62b18 (1842 kB)
- <6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- <6>Preemptible hierarchical RCU implementation.
- <6> RCU dyntick-idle grace-period acceleration is enabled.
- <6> Additional per-CPU info printed with stalls.
- <6>NR_IRQS:192
- <6>Architected local timer running at 24.00MHz.
- <6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- <2>start_kernel(): bug: interrupts were enabled early
- <6>Console: colour dummy device 80x30
- <6>Calibrating delay loop... <c>1816.98 BogoMIPS (lpj=9084928)
- <6>pid_max: default: 32768 minimum: 301
- <6>Mount-cache hash table entries: 512
- <6>Initializing cgroup subsys cpuacct
- <6>Initializing cgroup subsys memory
- <6>Initializing cgroup subsys devices
- <6>Initializing cgroup subsys freezer
- <6>Initializing cgroup subsys blkio
- <6>Initializing cgroup subsys perf_event
- <6>CPU: Testing write buffer coherency: ok
- <6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- <6>hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
- <6>Setting up static identity map for 0x4057b920 - 0x4057b978
- CPU1: Booted secondary processor
- <6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- <6>Brought up 2 CPUs
- <6>SMP: Total of 2 processors activated (3640.52 BogoMIPS).
- <6>devtmpfs: initialized
- <6>dummy:
- <6>NET: Registered protocol family 16
- <6>DMA: preallocated 256 KiB pool for atomic coherent allocations
- <6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- <6>hw-breakpoint: maximum watchpoint size is 8 bytes.
- <6>[ccu-inf] aw clock manager init
- <6>[ccu-inf] aw_ccu_init
- <6>[ccu-inf] script config pll4 to 300MHz
- <6>[ccu-inf] script config pll6 to 600MHz
- <6>[ccu-inf] script config pll7 to 297MHz
- <6>[ccu-inf] script config pll8 to 336MHz
- <6>Init eGon pin module V2.0
- <6>bio: create slab <bio-0> at 0
- <6>sunxi_gpio driver init ver 1.3
- <6>gpiochip_add: registered GPIOs 1 to 67 on device: A1X_GPIO
- <5>SCSI subsystem initialized
- <7>libata version 3.00 loaded.
- <6>usbcore: registered new interface driver usbfs
- <6>usbcore: registered new interface driver hub
- <6>usbcore: registered new device driver usb
- <6>Linux media interface: v0.10
- <6>Linux video capture interface: v2.00
- <6>Advanced Linux Sound Architecture Driver Version 1.0.25.
- <6>cfg80211: Calling CRDA to update world regulatory domain
- <6>Switching to clocksource arch_sys_counter
- <5>FS-Cache: Loaded
- <6>CacheFiles: Loaded
- <6>sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
- <6>sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
- <6>hub 1-0:1.0: USB hub found
- <6>hub 1-0:1.0: 1 port detected
- <6>NET: Registered protocol family 2
- <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- <6>TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
- <6>TCP: Hash tables configured (established 131072 bind 65536)
- <6>TCP: reno registered
- <6>UDP hash table entries: 512 (order: 2, 16384 bytes)
- <6>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- <6>NET: Registered protocol family 1
- <6>RPC: Registered named UNIX socket transport module.
- <6>RPC: Registered udp transport module.
- <6>RPC: Registered tcp transport module.
- <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
- <6>audit: initializing netlink socket (disabled)
- <5>type=2000 audit(0.520:1): initialized
- highmem bounce pool size: 64 pages
- <5>VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- <5>NFS: Registering the id_resolver key type
- <6>NTFS driver 2.1.30 [Flags: R/W].
- <6>fuse init (API version 7.18)
- <6>msgmni has been set to 1221
- <3>alg: comp: Compression test 1 failed for lzo-generic: output len = 57
- <6>alg: No test for stdrng (krng)
- <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- <6>io scheduler noop registered
- <6>io scheduler deadline registered
- <6>io scheduler cfq registered (default)
- <6>sunxi disp driver loaded (/dev/disp api 1.0)
- <6>Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- <6>[uart]: used uart info.: 0xc1
- <6>[uart]: serial probe 0 irq 33 mapbase 0x01c28000
- <6>sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.4.90+ (root@debian) (gcc version 4.7.1 (Debian 4.7.1-7) ) #11 SMP PREEMPT Wed Aug 20 08:20:32 EEST 2014
- [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: sun7i
- [ 0.000000] Memory Reserved:
- [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
- [ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
- [ 0.000000] G2D : 0x49000000 - 0x49ffffff ( 16 MB)
- [ 0.000000] LCD : 0x4a000000 - 0x4bffffff ( 32 MB)
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
- [ 0.000000] On node 0 totalpages: 262144
- [ 0.000000] free_area_init_node: node 0, pgdat c088f180, node_mem_map d0000000
- [ 0.000000] DMA zone: 512 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 65024 pages, LIFO batch:15
- [ 0.000000] Normal zone: 1008 pages used for memmap
- [ 0.000000] Normal zone: 128016 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 528 pages used for memmap
- [ 0.000000] HighMem zone: 67056 pages, LIFO batch:15
- [ 0.000000] PERCPU: Embedded 7 pages/cpu @d0808000 s7616 r8192 d12864 u32768
- [ 0.000000] pcpu-alloc: s7616 r8192 d12864 u32768 alloc=8*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
- [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nand3 loglevel=8
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] allocated 2097152 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 1024MB = 1024MB total
- [ 0.000000] Memory: 895672k/895672k available, 152904k reserved, 270336K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc07e8a54 (8067 kB)
- [ 0.000000] .init : 0xc07e9000 - 0xc0828dc0 ( 256 kB)
- [ 0.000000] .data : 0xc082a000 - 0xc0896330 ( 433 kB)
- [ 0.000000] .bss : 0xc0896354 - 0xc0a62b18 (1842 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] Additional per-CPU info printed with stalls.
- [ 0.000000] NR_IRQS:192
- [ 0.000000] Architected local timer running at 24.00MHz.
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] start_kernel(): bug: interrupts were enabled early
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.010897] Calibrating delay loop... 1816.98 BogoMIPS (lpj=9084928)
- [ 0.075994] pid_max: default: 32768 minimum: 301
- [ 0.079670] Mount-cache hash table entries: 512
- [ 0.083978] Initializing cgroup subsys cpuacct
- [ 0.087309] Initializing cgroup subsys memory
- [ 0.090737] Initializing cgroup subsys devices
- [ 0.094174] Initializing cgroup subsys freezer
- [ 0.097400] Initializing cgroup subsys blkio
- [ 0.101080] Initializing cgroup subsys perf_event
- [ 0.104661] CPU: Testing write buffer coherency: ok
- [ 0.109869] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.116978] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
- [ 0.122526] Setting up static identity map for 0x4057b920 - 0x4057b978
- [ 0.238581] CPU1: Booted secondary processor
- [ 0.297452] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.299463] Brought up 2 CPUs
- [ 0.304774] SMP: Total of 2 processors activated (3640.52 BogoMIPS).
- [ 0.307995] devtmpfs: initialized
- [ 0.313519] dummy:
- [ 0.317219] NET: Registered protocol family 16
- [ 0.323416] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.331056] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.335881] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.339034] [ccu-inf] aw clock manager init
- [ 0.341305] [ccu-inf] aw_ccu_init
- [ 0.345284] [ccu-inf] script config pll4 to 300MHz
- [ 0.349036] [ccu-inf] script config pll6 to 600MHz
- [ 0.352784] [ccu-inf] script config pll7 to 297MHz
- [ 0.356550] [ccu-inf] script config pll8 to 336MHz
- [ 0.359296] Init eGon pin module V2.0
- [ 0.367708] bio: create slab <bio-0> at 0
- [ 0.371152] sunxi_gpio driver init ver 1.3
- [ 0.377268] gpiochip_add: registered GPIOs 1 to 67 on device: A1X_GPIO
- [ 0.380476] SCSI subsystem initialized
- [ 0.383323] libata version 3.00 loaded.
- [ 0.387974] usbcore: registered new interface driver usbfs
- [ 0.392339] usbcore: registered new interface driver hub
- [ 0.396522] usbcore: registered new device driver usb
- [ 0.399619] Linux media interface: v0.10
- [ 0.403256] Linux video capture interface: v2.00
- [ 0.408798] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.415024] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.419468] Switching to clocksource arch_sys_counter
- [ 0.421625] FS-Cache: Loaded
- [ 0.423835] CacheFiles: Loaded
- [ 0.457893] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
- [ 0.464604] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
- [ 0.468071] hub 1-0:1.0: USB hub found
- [ 0.470968] hub 1-0:1.0: 1 port detected
- [ 0.475579] NET: Registered protocol family 2
- [ 0.481919] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.488917] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.496483] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
- [ 0.503158] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.505365] TCP: reno registered
- [ 0.510244] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.515601] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.519255] NET: Registered protocol family 1
- [ 0.524607] RPC: Registered named UNIX socket transport module.
- [ 0.528273] RPC: Registered udp transport module.
- [ 0.531930] RPC: Registered tcp transport module.
- [ 0.537349] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.542902] audit: initializing netlink socket (disabled)
- [ 0.546668] type=2000 audit(0.520:1): initialized
- [ 0.551028] highmem bounce pool size: 64 pages
- [ 0.562952] VFS: Disk quotas dquot_6.5.2
- [ 0.568447] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.575415] NFS: Registering the id_resolver key type
- [ 0.580083] NTFS driver 2.1.30 [Flags: R/W].
- [ 0.583459] fuse init (API version 7.18)
- [ 0.586926] msgmni has been set to 1221
- [ 0.598020] alg: comp: Compression test 1 failed for lzo-generic: output len = 57
- [ 0.601223] alg: No test for stdrng (krng)
- [ 0.607981] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.610869] io scheduler noop registered
- [ 0.614133] io scheduler deadline registered
- [ 0.617826] io scheduler cfq registered (default)
- [ 0.622667] sunxi disp driver loaded (/dev/disp api 1.0)
- [ 0.628262] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- [ 0.632869] [uart]: used uart info.: 0xc1
- [ 0.637563] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
- [ 0.663846] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
- <6>console [ttyS0] enabled
- [ 1.387963] console [ttyS0] enabled
- <6>[uart]: serial probe 6 irq 51 mapbase 0x01c29800
- [ 1.396351] [uart]: serial probe 6 irq 51 mapbase 0x01c29800
- <6>sunxi-uart.6: ttyS1 at MMIO 0x1c29800 (irq = 51) is a U6_16550A
- [ 1.428227] sunxi-uart.6: ttyS1 at MMIO 0x1c29800 (irq = 51) is a U6_16550A
- <6>[uart]: serial probe 7 irq 52 mapbase 0x01c29c00
- [ 1.440047] [uart]: serial probe 7 irq 52 mapbase 0x01c29c00
- <6>sunxi-uart.7: ttyS2 at MMIO 0x1c29c00 (irq = 52) is a U6_16550A
- [ 1.471910] sunxi-uart.7: ttyS2 at MMIO 0x1c29c00 (irq = 52) is a U6_16550A
- <7>G2D: drv_g2d_init
- [ 1.481416] G2D: drv_g2d_init
- <6>G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
- [ 1.489112] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
- <6>G2D: head:c9000000,tail:ca000000
- [ 1.498083] G2D: head:c9000000,tail:ca000000
- <6>G2D: Module initialized.major:250
- [ 1.505704] G2D: Module initialized.major:250
- <6>brd: module loaded
- [ 1.513117] brd: module loaded
- <6>loop: module loaded
- [ 1.521956] loop: module loaded
- <6>sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
- [ 1.531450] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
- <4>sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
- [ 1.542717] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
- <6>sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
- [ 1.555471] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
- <6>sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
- [ 1.570354] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
- <6>scsi0 : sw_ahci_platform
- [ 1.581186] scsi0 : sw_ahci_platform
- <6>ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
- [ 1.591978] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
- <6>[spi-inf] Found 2 spi devices in config files
- [ 1.604587] [spi-inf] Found 2 spi devices in config files
- <6>[spi-inf] boards num modalias max_spd_hz bus_num cs mode
- [ 1.616786] [spi-inf] boards num modalias max_spd_hz bus_num cs mode
- <6>[spi-inf] spi_board0 irq gpio not used
- [ 1.628368] [spi-inf] spi_board0 irq gpio not used
- <6>[spi-inf] 0 spidev 1000000 2 0 0x3
- [ 1.640116] [spi-inf] 0 spidev 1000000 2 0 0x3
- <6>[spi-inf] spi_board1 irq gpio not used
- [ 1.651867] [spi-inf] spi_board1 irq gpio not used
- <6>[spi-inf] 1 spidev 1000000 1 0 0x3
- [ 1.663609] [spi-inf] 1 spidev 1000000 1 0 0x3
- <6>[spi-inf] sun7i_spi_probe: spi1 dma type: normal
- [ 1.676447] [spi-inf] sun7i_spi_probe: spi1 dma type: normal
- <6>[spi-inf] bus num = 1, spi used = 1
- [ 1.685692] [spi-inf] bus num = 1, spi used = 1
- <6>[spi-inf] sun7i_spi_probe: spi1 cs bitmap: 0x1
- [ 1.694748] [spi-inf] sun7i_spi_probe: spi1 cs bitmap: 0x1
- <6>[spi-inf] sun7i_spi_set_mclk: spi1 source = sdram_pll_p, src_clk = 384000000, mclk 96000000
- [ 1.708820] [spi-inf] sun7i_spi_set_mclk: spi1 source = sdram_pll_p, src_clk = 384000000, mclk 96000000
- <6>sun7i-spi sun7i-spi.1: master is unqueued, this is deprecated
- [ 1.724082] sun7i-spi sun7i-spi.1: master is unqueued, this is deprecated
- <6>[spi-inf] sun7i_spi_probe: reuuimlla's SoC SPI Driver loaded for Bus SPI1 with 2 Slaves at most
- [ 1.739891] [spi-inf] sun7i_spi_probe: reuuimlla's SoC SPI Driver loaded for Bus SPI1 with 2 Slaves at most
- <6>[spi-inf] sun7i_spi_probe: spi1 driver probe succeed, base f012a000, irq 43, dma_id_rx 25, dma_id_tx 25
- [ 1.759024] [spi-inf] sun7i_spi_probe: spi1 driver probe succeed, base f012a000, irq 43, dma_id_rx 25, dma_id_tx 25
- <6>[spi-inf] sun7i_spi_probe: spi2 dma type: normal
- [ 1.774092] [spi-inf] sun7i_spi_probe: spi2 dma type: normal
- <6>[spi-inf] bus num = 2, spi used = 1
- [ 1.783334] [spi-inf] bus num = 2, spi used = 1
- <6>[spi-inf] sun7i_spi_probe: spi2 cs bitmap: 0x1
- [ 1.792375] [spi-inf] sun7i_spi_probe: spi2 cs bitmap: 0x1
- <6>[spi-inf] sun7i_spi_set_mclk: spi2 source = sdram_pll_p, src_clk = 384000000, mclk 96000000
- [ 1.806420] [spi-inf] sun7i_spi_set_mclk: spi2 source = sdram_pll_p, src_clk = 384000000, mclk 96000000
- <6>sun7i-spi sun7i-spi.2: master is unqueued, this is deprecated
- [ 1.821671] sun7i-spi sun7i-spi.2: master is unqueued, this is deprecated
- <6>[spi-inf] sun7i_spi_probe: reuuimlla's SoC SPI Driver loaded for Bus SPI2 with 2 Slaves at most
- [ 1.837406] [spi-inf] sun7i_spi_probe: reuuimlla's SoC SPI Driver loaded for Bus SPI2 with 2 Slaves at most
- <6>[spi-inf] sun7i_spi_probe: spi2 driver probe succeed, base f012c000, irq 44, dma_id_rx 26, dma_id_tx 26
- [ 1.856534] [spi-inf] sun7i_spi_probe: spi2 driver probe succeed, base f012c000, irq 44, dma_id_rx 26, dma_id_tx 26
- <6>PPP generic driver version 2.4.2
- [ 1.870272] PPP generic driver version 2.4.2
- <6>PPP BSD Compression module registered
- [ 1.878376] PPP BSD Compression module registered
- <6>PPP Deflate Compression module registered
- [ 1.887093] PPP Deflate Compression module registered
- <6>PPP MPPE Compression module registered
- [ 1.897089] PPP MPPE Compression module registered
- <6>NET: Registered protocol family 24
- [ 1.905313] NET: Registered protocol family 24
- <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.915761] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.927527] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [sw-ehci1]: open clock
- [ 1.936139] [sw-ehci1]: open clock
- <6>ata1: SATA link down (SStatus 0 SControl 300)
- [ 1.953932] ata1: SATA link down (SStatus 0 SControl 300)
- [sw-ehci1]: Set USB Power ON
- [ 1.962287] [sw-ehci1]: Set USB Power ON
- <6>sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.972626] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
- [ 1.986367] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
- <6>sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
- [ 1.997831] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
- <6>sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
- [ 2.023896] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
- <6>hub 2-0:1.0: USB hub found
- [ 2.032661] hub 2-0:1.0: USB hub found
- <6>hub 2-0:1.0: 1 port detected
- [ 2.039296] hub 2-0:1.0: 1 port detected
- [sw-ohci1]: open clock
- [ 2.045838] [sw-ohci1]: open clock
- <6>sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 2.075421] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
- <6>sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
- [ 2.088803] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
- <6>sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
- [ 2.100155] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
- <6>hub 3-0:1.0: USB hub found
- [ 2.166827] hub 3-0:1.0: USB hub found
- <6>hub 3-0:1.0: 1 port detected
- [ 2.173507] hub 3-0:1.0: 1 port detected
- [sw-ehci2]: open clock
- [ 2.180014] [sw-ehci2]: open clock
- [sw-ehci2]: Set USB Power ON
- [ 2.206091] [sw-ehci2]: Set USB Power ON
- <6>sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.216454] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
- [ 2.230157] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
- <6>sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
- [ 2.241594] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
- <6>sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
- [ 2.263899] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
- <6>hub 4-0:1.0: USB hub found
- [ 2.272682] hub 4-0:1.0: USB hub found
- <6>hub 4-0:1.0: 1 port detected
- [ 2.279325] hub 4-0:1.0: 1 port detected
- [sw-ohci2]: open clock
- [ 2.285872] [sw-ohci2]: open clock
- <6>sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 2.315409] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
- <6>sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
- [ 2.328794] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
- <6>sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
- [ 2.340154] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
- <6>hub 5-0:1.0: USB hub found
- [ 2.406864] hub 5-0:1.0: USB hub found
- <6>hub 5-0:1.0: 1 port detected
- [ 2.413538] hub 5-0:1.0: 1 port detected
- <6>mousedev: PS/2 mouse device common for all mice
- [ 2.422517] mousedev: PS/2 mouse device common for all mice
- ===========================hv_keypad_init=====================
- [ 2.433673] ===========================hv_keypad_init=====================
- ========HV Inital ===================
- [ 2.443943] ========HV Inital ===================
- <3>tkey_fetch_sysconfig_para: tkey_unused.
- [ 2.452557] tkey_fetch_sysconfig_para: tkey_unused.
- hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0
- [ 2.464748] hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0
- rtp_used == 1.
- [ 2.474811] rtp_used == 1.
- sun4i-ts: tp_press_threshold_enable is 0.
- [ 2.481341] sun4i-ts: tp_press_threshold_enable is 0.
- sun4i-ts: rtp_sensitive_level is 15.
- [ 2.489705] sun4i-ts: rtp_sensitive_level is 15.
- sun4i-ts: rtp_exchange_x_y_flag is 0.
- [ 2.497730] sun4i-ts: rtp_exchange_x_y_flag is 0.
- <6>input: sun4i-ts as /devices/platform/sun4i-ts/input/input0
- [ 2.508304] input: sun4i-ts as /devices/platform/sun4i-ts/input/input0
- <3>sunxi-rtc sunxi-rtc: Warning: RTC time is wrong!
- [ 2.520201] sunxi-rtc sunxi-rtc: Warning: RTC time is wrong!
- <6>sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
- [ 2.531131] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
- <6>i2c /dev entries driver
- [ 2.539739] i2c /dev entries driver
- config i2c gpio with gpio_config api
- [ 2.546945] config i2c gpio with gpio_config api
- <6>axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
- [ 2.557200] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
- <4>i2c i2c-0: Invalid probe address 0x00
- [ 2.566971] i2c i2c-0: Invalid probe address 0x00
- <6>I2C: i2c-0: AW16XX I2C adapter
- [ 2.574744] I2C: i2c-0: AW16XX I2C adapter
- config i2c gpio with gpio_config api
- [ 2.582219] config i2c gpio with gpio_config api
- <4>i2c i2c-1: Invalid probe address 0x00
- [ 2.590809] i2c i2c-1: Invalid probe address 0x00
- <6>I2C: i2c-1: AW16XX I2C adapter
- [ 2.598580] I2C: i2c-1: AW16XX I2C adapter
- config i2c gpio with gpio_config api
- [ 2.606063] config i2c gpio with gpio_config api
- <4>i2c i2c-2: Invalid probe address 0x00
- [ 2.614602] i2c i2c-2: Invalid probe address 0x00
- <6>I2C: i2c-2: AW16XX I2C adapter
- [ 2.622346] I2C: i2c-2: AW16XX I2C adapter
- [ace_drv] start!!!
- [ 2.628253] [ace_drv] start!!!
- [ace_drv] init end!!!
- [ 2.633666] [ace_drv] init end!!!
- [pa_drv] start!!!
- [ 2.638639] [pa_drv] start!!!
- [pa_drv] init end!!!
- [ 2.643849] [pa_drv] init end!!!
- <6>axp20_ldo1: 1300 mV
- [ 2.649398] axp20_ldo1: 1300 mV
- <6>axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
- [ 2.657868] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
- <6>axp20_ldo3: 700 <--> 3500 mV at 2800 mV
- [ 2.668026] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
- <6>axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
- [ 2.678177] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
- <6>axp20_buck2: 700 <--> 2275 mV at 1425 mV
- [ 2.688586] axp20_buck2: 700 <--> 2275 mV at 1425 mV
- <6>axp20_buck3: 700 <--> 3500 mV at 1300 mV
- [ 2.699016] axp20_buck3: 700 <--> 3500 mV at 1300 mV
- <6>axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
- [ 2.708962] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
- <6>input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
- [ 2.723751] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
- <4>axp20_ldo2: Failed to create debugfs directory
- [ 2.752428] axp20_ldo2: Failed to create debugfs directory
- <6>device-mapper: uevent: version 1.0.3
- [ 2.762945] device-mapper: uevent: version 1.0.3
- <6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 2.775374] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- <6>device-mapper: multipath: version 1.3.0 loaded
- [ 2.788763] device-mapper: multipath: version 1.3.0 loaded
- <6>device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 2.799756] device-mapper: multipath round-robin: version 1.0.0 loaded
- <6>device-mapper: multipath queue-length: version 0.1.0 loaded
- [ 2.811859] device-mapper: multipath queue-length: version 0.1.0 loaded
- <6>device-mapper: multipath service-time: version 0.2.0 loaded
- [ 2.824047] device-mapper: multipath service-time: version 0.2.0 loaded
- <6>cpuidle: using governor ladder
- [ 2.834071] cpuidle: using governor ladder
- <6>cpuidle: using governor menu
- [ 2.841037] cpuidle: using governor menu
- <6>[mmc-msg] sw_mci_init
- [ 2.847296] [mmc-msg] sw_mci_init
- <6>[mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
- [ 2.856394] [mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
- <6>[mmc-msg] sdc0 set round clock 400000, src 24000000
- [ 2.868397] [mmc-msg] sdc0 set round clock 400000, src 24000000
- <6>[mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 2.882558] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- <6>[mmc-msg] sdc0 Probe: base:0xf014e000 irq:64 sg_cpu:f0150000(4fc00000) ret 0.
- [ 2.899830] [mmc-msg] sdc0 Probe: base:0xf014e000 irq:64 sg_cpu:f0150000(4fc00000) ret 0.
- <6>[mmc-msg] sdc3 set round clock 400000, src 24000000
- [ 2.913007] [mmc-msg] sdc3 set round clock 400000, src 24000000
- <6>[mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 2.927107] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- <6>[mmc-msg] sdc3 Probe: base:0xf0152000 irq:67 sg_cpu:f0154000(4fc01000) ret 0.
- [ 2.944341] [mmc-msg] sdc3 Probe: base:0xf0152000 irq:67 sg_cpu:f0154000(4fc01000) ret 0.
- [mmc_pm]: failed to fetch sdio card configuration!
- [ 2.957084] [mmc_pm]: failed to fetch sdio card configuration!
- <6>ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.967884] ledtrig-cpu: registered to indicate activity on CPUs
- <6>usbcore: registered new interface driver usbhid
- [ 2.979040] usbcore: registered new interface driver usbhid
- <6>usbhid: USB HID core driver
- [ 2.987413] usbhid: USB HID core driver
- <6>ashmem: initialized
- [ 2.993934] ashmem: initialized
- <6>logger: created 256K log 'log_main'
- [ 3.000680] logger: created 256K log 'log_main'
- <6>logger: created 256K log 'log_events'
- [ 3.009059] logger: created 256K log 'log_events'
- <6>logger: created 256K log 'log_radio'
- [ 3.017484] logger: created 256K log 'log_radio'
- <6>logger: created 256K log 'log_system'
- [ 3.025875] logger: created 256K log 'log_system'
- <6>IPv4 over IPv4 tunneling driver
- [ 3.036225] IPv4 over IPv4 tunneling driver
- <6>TCP: bic registered
- [ 3.043257] TCP: bic registered
- <6>TCP: cubic registered
- [ 3.048663] TCP: cubic registered
- <6>TCP: westwood registered
- [ 3.054535] TCP: westwood registered
- <6>TCP: highspeed registered
- [ 3.060716] TCP: highspeed registered
- <6>TCP: hybla registered
- [ 3.066710] TCP: hybla registered
- <6>TCP: htcp registered
- [ 3.072231] TCP: htcp registered
- <6>TCP: vegas registered
- [ 3.077718] TCP: vegas registered
- <6>TCP: veno registered
- [ 3.083220] TCP: veno registered
- <6>TCP: scalable registered
- [ 3.088966] TCP: scalable registered
- <6>TCP: lp registered
- [ 3.094550] TCP: lp registered
- <6>TCP: yeah registered
- [ 3.099777] TCP: yeah registered
- <6>TCP: illinois registered
- [ 3.105534] TCP: illinois registered
- <6>Initializing XFRM netlink socket
- [ 3.112322] Initializing XFRM netlink socket
- <6>NET: Registered protocol family 10
- [ 3.120689] NET: Registered protocol family 10
- <6>NET: Registered protocol family 17
- [ 3.129597] NET: Registered protocol family 17
- <6>NET: Registered protocol family 15
- [ 3.137513] NET: Registered protocol family 15
- [mmc_pm]: No sdio card, please check your config !!
- [ 3.146623] [mmc_pm]: No sdio card, please check your config !!
- <5>Registering the dns_resolver key type
- [ 3.156216] Registering the dns_resolver key type
- <6>VFP support v0.3: [ 3.162915] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
- implementor 41 architecture 2 part 30 variant 7 rev 4
- <5>Registering SWP/SWPB emulation handler
- [ 3.179140] Registering SWP/SWPB emulation handler
- <4>axp20_buck2: Failed to create debugfs directory
- [ 3.188550] axp20_buck2: Failed to create debugfs directory
- <6>[cpu_freq] INF:-------------------V-F Table-------------------
- [ 3.200292] [cpu_freq] INF:-------------------V-F Table-------------------
- <6>[cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
- [ 3.212238] [cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
- <6>[cpu_freq] INF: voltage = 1425mv frequency = 912MHz
- [ 3.223375] [cpu_freq] INF: voltage = 1425mv frequency = 912MHz
- <6>[cpu_freq] INF: voltage = 1350mv frequency = 864MHz
- [ 3.234508] [cpu_freq] INF: voltage = 1350mv frequency = 864MHz
- <6>[cpu_freq] INF: voltage = 1250mv frequency = 720MHz
- [ 3.245644] [cpu_freq] INF: voltage = 1250mv frequency = 720MHz
- <6>[cpu_freq] INF: voltage = 1150mv frequency = 528MHz
- [ 3.256778] [cpu_freq] INF: voltage = 1150mv frequency = 528MHz
- <6>[cpu_freq] INF: voltage = 1100mv frequency = 312MHz
- [ 3.267911] [cpu_freq] INF: voltage = 1100mv frequency = 312MHz
- <6>[cpu_freq] INF: voltage = 1050mv frequency = 144MHz
- [ 3.279047] [cpu_freq] INF: voltage = 1050mv frequency = 144MHz
- <6>[cpu_freq] INF: voltage = 1000mv frequency = 0MHz
- [ 3.290180] [cpu_freq] INF: voltage = 1000mv frequency = 0MHz
- <6>[cpu_freq] INF:-----------------------------------------------
- [ 3.302092] [cpu_freq] INF:-----------------------------------------------
- <6>[cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 1008MHz, min freq: 720MHz
- [ 3.318781] [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 1008MHz, min freq: 720MHz
- <6>registered taskstats version 1
- [ 3.333490] registered taskstats version 1
- <6>Console: switching to colour frame buffer device 128x37
- [ 3.722114] Console: switching to colour frame buffer device 128x37
- <6>I2C: i2c-3: HDMI I2C adapter
- [ 3.743095] I2C: i2c-3: HDMI I2C adapter
- <4>axp20_buck3: incomplete constraints, leaving on
- [ 3.774761] axp20_buck3: incomplete constraints, leaving on
- <4>axp20_buck2: incomplete constraints, leaving on
- [ 3.785107] axp20_buck2: incomplete constraints, leaving on
- <4>axp20_ldo4: incomplete constraints, leaving on
- [ 3.795357] axp20_ldo4: incomplete constraints, leaving on
- <4>axp20_ldo3: incomplete constraints, leaving on
- [ 3.805522] axp20_ldo3: incomplete constraints, leaving on
- <4>axp20_ldo2: incomplete constraints, leaving on
- [ 3.815682] axp20_ldo2: incomplete constraints, leaving on
- <4>axp20_ldo1: incomplete constraints, leaving on
- [ 3.825841] axp20_ldo1: incomplete constraints, leaving on
- <6>console [netcon0] enabled
- [ 3.834255] console [netcon0] enabled
- <6>netconsole: network logging started
- [ 3.841392] netconsole: network logging started
- <6>sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)
- [ 3.853458] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)
- <6>ALSA device list:
- [ 3.864016] ALSA device list:
- <6> #0: sunxi-CODEC Audio Codec
- [ 3.870025] #0: sunxi-CODEC Audio Codec
- VFS: Cannot open root device "nand3" or unknown-block(0,0): error -6
- [ 3.885981] VFS: Cannot open root device "nand3" or unknown-block(0,0): error -6
- Please append a correct "root=" boot option; here are the available partitions:
- [ 3.900442] Please append a correct "root=" boot option; here are the available partitions:
- <0>Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
- [ 3.916014] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
- [<c0015098>] (unwind_backtrace+0x0/0x138) from [<c0572d60>] (panic+0x8c/0x1d0)
- [ 3.931252] [<c0015098>] (unwind_backtrace+0x0/0x138) from [<c0572d60>] (panic+0x8c/0x1d0)
- [<c0572d60>] (panic+0x8c/0x1d0) from [<c07e9d70>] (mount_block_root+0x174/0x228)
- [ 3.946640] [<c0572d60>] (panic+0x8c/0x1d0) from [<c07e9d70>] (mount_block_root+0x174/0x228)
- [<c07e9d70>] (mount_block_root+0x174/0x228) from [<c07ea004>] (mount_root+0xf4/0x114)
- [ 3.962627] [<c07e9d70>] (mount_block_root+0x174/0x228) from [<c07ea004>] (mount_root+0xf4/0x114)
- [<c07ea004>] (mount_root+0xf4/0x114) from [<c07ea188>] (prepare_namespace+0x164/0x1c8)
- [ 3.979134] [<c07ea004>] (mount_root+0xf4/0x114) from [<c07ea188>] (prepare_namespace+0x164/0x1c8)
- [<c07ea188>] (prepare_namespace+0x164/0x1c8) from [<c07e9a24>] (kernel_init+0x1d4/0x218)
- [ 3.995900] [<c07ea188>] (prepare_namespace+0x164/0x1c8) from [<c07e9a24>] (kernel_init+0x1d4/0x218)
- [<c07e9a24>] (kernel_init+0x1d4/0x218) from [<c000f7a8>] (kernel_thread_exit+0x0/0x8)
- [ 4.012582] [<c07e9a24>] (kernel_init+0x1d4/0x218) from [<c000f7a8>] (kernel_thread_exit+0x0/0x8)
- <2>CPU1: stopping
- [ 4.023112] CPU1: stopping
- [<c0015098>] (unwind_backtrace+0x0/0x138) from [<c0013bb0>] (handle_IPI+0x194/0x1c8)
- [ 4.033295] [<c0015098>] (unwind_backtrace+0x0/0x138) from [<c0013bb0>] (handle_IPI+0x194/0x1c8)
- [<c0013bb0>] (handle_IPI+0x194/0x1c8) from [<c00084fc>] (gic_handle_irq+0x50/0x58)
- [ 4.049367] [<c0013bb0>] (handle_IPI+0x194/0x1c8) from [<c00084fc>] (gic_handle_irq+0x50/0x58)
- [<c00084fc>] (gic_handle_irq+0x50/0x58) from [<c000e880>] (__irq_svc+0x40/0x70)
- [ 4.065006] [<c00084fc>] (gic_handle_irq+0x50/0x58) from [<c000e880>] (__irq_svc+0x40/0x70)
- Exception stack(0xef065f88 to 0xef065fd0)
- [ 4.077084] Exception stack(0xef065f88 to 0xef065fd0)
- 5f80: ffffffed 00000001 0ffe9000 00000000 ef064000 ef064000
- [ 4.088990] 5f80: ffffffed 00000001 0ffe9000 00000000 ef064000 ef064000
- 5fa0: c0896448 c057e994 ef064000 410fc074 c0840b90 00000000 ffff8c4c ef065fd0
- [ 4.104018] 5fa0: c0896448 c057e994 ef064000 410fc074 c0840b90 00000000 ffff8c4c ef065fd0
- 5fc0: c000f80c c000f810 60000013 ffffffff
- [ 4.115923] 5fc0: c000f80c c000f810 60000013 ffffffff
- [<c000e880>] (__irq_svc+0x40/0x70) from [<c000f810>] (default_idle+0x28/0x30)
- [ 4.127833] [<c000e880>] (__irq_svc+0x40/0x70) from [<c000f810>] (default_idle+0x28/0x30)
- [<c000f810>] (default_idle+0x28/0x30) from [<c000fb44>] (cpu_idle+0xd0/0x114)
- [ 4.142856] [<c000f810>] (default_idle+0x28/0x30) from [<c000fb44>] (cpu_idle+0xd0/0x114)
- [<c000fb44>] (cpu_idle+0xd0/0x114) from [<4056f5f4>] (0x4056f5f4)
- [ 4.156839] [<c000fb44>] (cpu_idle+0xd0/0x114) from [<4056f5f4>] (0x4056f5f4)
- <6>[hotplug]: cpu(0) try to kill cpu(1)
- [ 4.167531] [hotplug]: cpu(0) try to kill cpu(1)
- <3>[hotplug]: try to kill cpu:1 failed!
- [ 5.175568] [hotplug]: try to kill cpu:1 failed!
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement