Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 5.4.34-1-pve (build@pve) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PVE 5.4.34-2 (Thu, 07 May 2020 10:02:02 +0200) ()
- [ 0.000000] Command line: BOOT_IMAGE=/ROOT/pve-1@/boot/vmlinuz-5.4.34-1-pve root=ZFS=rpool/ROOT/pve-1 ro root=ZFS=rpool/ROOT/pve-1 boot=zfs kvm.ignore_msrs=1 intel_iommu=on video=vesafb:off,efifb:off quiet
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Hygon HygonGenuine
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] zhaoxin Shanghai
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
- [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
- [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
- [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
- [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000084e82fff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000084e83000-0x0000000084e83fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x0000000084e84000-0x0000000084e84fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000084e85000-0x000000008cbb8fff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000008cbb9000-0x000000008d061fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000008d062000-0x000000008d11afff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000008d11b000-0x000000008d4c4fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000008d4c5000-0x000000008dffefff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000008dfff000-0x000000008dffffff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000008e000000-0x00000000cf7fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000082f7fffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 3.1.1 present.
- [ 0.000000] DMI: Gigabyte Technology Co., Ltd. Z370N WIFI/Z370N WIFI-CF, BIOS F5 07/05/2018
- [ 0.000000] tsc: Detected 2100.000 MHz processor
- [ 0.001594] tsc: Detected 2099.944 MHz TSC
- [ 0.001594] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.001595] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.001600] last_pfn = 0x82f800 max_arch_pfn = 0x400000000
- [ 0.001602] MTRR default type: write-back
- [ 0.001603] MTRR fixed ranges enabled:
- [ 0.001604] 00000-9FFFF write-back
- [ 0.001604] A0000-BFFFF uncachable
- [ 0.001605] C0000-FFFFF write-protect
- [ 0.001606] MTRR variable ranges enabled:
- [ 0.001607] 0 base 00C0000000 mask 7FC0000000 uncachable
- [ 0.001607] 1 base 00A0000000 mask 7FE0000000 uncachable
- [ 0.001608] 2 base 0090000000 mask 7FF0000000 uncachable
- [ 0.001608] 3 base 008F000000 mask 7FFF000000 uncachable
- [ 0.001609] 4 disabled
- [ 0.001609] 5 disabled
- [ 0.001610] 6 disabled
- [ 0.001610] 7 disabled
- [ 0.001610] 8 disabled
- [ 0.001611] 9 disabled
- [ 0.001896] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
- [ 0.002025] last_pfn = 0x8e000 max_arch_pfn = 0x400000000
- [ 0.008379] found SMP MP-table at [mem 0x000fcde0-0x000fcdef]
- [ 0.008424] check: Scanning 1 areas for low memory corruption
- [ 0.008427] Using GB pages for direct mapping
- [ 0.008429] BRK [0x255a01000, 0x255a01fff] PGTABLE
- [ 0.008430] BRK [0x255a02000, 0x255a02fff] PGTABLE
- [ 0.008431] BRK [0x255a03000, 0x255a03fff] PGTABLE
- [ 0.008460] BRK [0x255a04000, 0x255a04fff] PGTABLE
- [ 0.008461] BRK [0x255a05000, 0x255a05fff] PGTABLE
- [ 0.008602] BRK [0x255a06000, 0x255a06fff] PGTABLE
- [ 0.008639] BRK [0x255a07000, 0x255a07fff] PGTABLE
- [ 0.008746] BRK [0x255a08000, 0x255a08fff] PGTABLE
- [ 0.008787] BRK [0x255a09000, 0x255a09fff] PGTABLE
- [ 0.008833] BRK [0x255a0a000, 0x255a0afff] PGTABLE
- [ 0.008886] RAMDISK: [mem 0x32fc9000-0x357dbfff]
- [ 0.008890] ACPI: Early table checksum verification disabled
- [ 0.008893] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
- [ 0.008895] ACPI: XSDT 0x000000008D11B0B0 0000DC (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.008900] ACPI: FACP 0x000000008D1428E8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
- [ 0.008904] ACPI: DSDT 0x000000008D11B220 0276C6 (v02 ALASKA A M I 01072009 INTL 20160422)
- [ 0.008906] ACPI: FACS 0x000000008D4C4F00 000040
- [ 0.008907] ACPI: APIC 0x000000008D142A00 0000A0 (v03 ALASKA A M I 01072009 AMI 00010013)
- [ 0.008909] ACPI: FPDT 0x000000008D142AA0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.008911] ACPI: FIDT 0x000000008D142AE8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.008913] ACPI: MCFG 0x000000008D142B88 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
- [ 0.008915] ACPI: SSDT 0x000000008D142BC8 0003A3 (v01 ALASKA A M I 00001000 INTL 20160422)
- [ 0.008917] ACPI: SSDT 0x000000008D142F70 0070B5 (v01 ALASKA A M I 00000001 INTL 20160422)
- [ 0.008919] ACPI: SSDT 0x000000008D14A028 003165 (v02 ALASKA A M I 00003000 INTL 20160422)
- [ 0.008921] ACPI: HPET 0x000000008D14D190 000038 (v01 ALASKA A M I 00000001 MSFT 0000005F)
- [ 0.008923] ACPI: SSDT 0x000000008D14D1C8 0011AA (v02 ALASKA A M I 00001000 INTL 20160422)
- [ 0.008925] ACPI: SSDT 0x000000008D14E378 002AD7 (v02 ALASKA A M I 00000000 INTL 20160422)
- [ 0.008926] ACPI: UEFI 0x000000008D150E50 000048 (v01 ALASKA A M I 00000002 01000013)
- [ 0.008928] ACPI: SSDT 0x000000008D150E98 0017AE (v02 ALASKA A M I 00003000 INTL 20160422)
- [ 0.008931] ACPI: LPIT 0x000000008D152648 000094 (v01 ALASKA A M I 00000000 MSFT 0000005F)
- [ 0.008932] ACPI: SSDT 0x000000008D1526E0 000141 (v02 ALASKA A M I 00000000 INTL 20160422)
- [ 0.008934] ACPI: SSDT 0x000000008D152828 00029F (v02 ALASKA A M I 00000000 INTL 20160422)
- [ 0.008936] ACPI: SSDT 0x000000008D152AC8 003002 (v02 ALASKA A M I 00001000 INTL 20160422)
- [ 0.008938] ACPI: SSDT 0x000000008D155AD0 000517 (v02 ALASKA A M I 00000000 INTL 20160422)
- [ 0.008940] ACPI: SSDT 0x000000008D155FE8 0002E9 (v02 ALASKA A M I 00000001 INTL 20160422)
- [ 0.008942] ACPI: DBGP 0x000000008D1562D8 000034 (v01 ALASKA A M I 00000002 MSFT 0000005F)
- [ 0.008944] ACPI: DBG2 0x000000008D156310 000054 (v00 ALASKA A M I 00000002 MSFT 0000005F)
- [ 0.008946] ACPI: DMAR 0x000000008D156368 0000A8 (v01 ALASKA A M I 00000001 INTL 00000001)
- [ 0.008948] ACPI: WSMT 0x000000008D156410 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.008955] ACPI: Local APIC address 0xfee00000
- [ 0.009096] No NUMA configuration found
- [ 0.009097] Faking a node at [mem 0x0000000000000000-0x000000082f7fffff]
- [ 0.009104] NODE_DATA(0) allocated [mem 0x82f7d5000-0x82f7fffff]
- [ 0.009261] Zone ranges:
- [ 0.009262] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.009263] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- [ 0.009263] Normal [mem 0x0000000100000000-0x000000082f7fffff]
- [ 0.009264] Device empty
- [ 0.009265] Movable zone start for each node
- [ 0.009268] Early memory node ranges
- [ 0.009268] node 0: [mem 0x0000000000001000-0x000000000009bfff]
- [ 0.009269] node 0: [mem 0x0000000000100000-0x0000000084e82fff]
- [ 0.009270] node 0: [mem 0x0000000084e85000-0x000000008cbb8fff]
- [ 0.009270] node 0: [mem 0x000000008d062000-0x000000008d11afff]
- [ 0.009270] node 0: [mem 0x000000008dfff000-0x000000008dffffff]
- [ 0.009271] node 0: [mem 0x0000000100000000-0x000000082f7fffff]
- [ 0.009359] Zeroed struct page in unavailable ranges: 15348 pages
- [ 0.009360] Initmem setup node 0 [mem 0x0000000000001000-0x000000082f7fffff]
- [ 0.009361] On node 0 totalpages: 8111116
- [ 0.009362] DMA zone: 64 pages used for memmap
- [ 0.009363] DMA zone: 21 pages reserved
- [ 0.009363] DMA zone: 3995 pages, LIFO batch:0
- [ 0.009393] DMA32 zone: 8946 pages used for memmap
- [ 0.009394] DMA32 zone: 572529 pages, LIFO batch:63
- [ 0.015022] Normal zone: 117728 pages used for memmap
- [ 0.015023] Normal zone: 7534592 pages, LIFO batch:63
- [ 0.068045] Reserving Intel graphics memory at [mem 0x8f800000-0xcf7fffff]
- [ 0.068225] ACPI: PM-Timer IO Port: 0x1808
- [ 0.068226] ACPI: Local APIC address 0xfee00000
- [ 0.068230] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.068231] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- [ 0.068231] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- [ 0.068232] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
- [ 0.068232] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
- [ 0.068233] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
- [ 0.068259] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
- [ 0.068260] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.068261] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.068262] ACPI: IRQ0 used by override.
- [ 0.068263] ACPI: IRQ9 used by override.
- [ 0.068264] Using ACPI (MADT) for SMP configuration information
- [ 0.068265] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.068267] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
- [ 0.068279] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.068280] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
- [ 0.068281] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
- [ 0.068281] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- [ 0.068281] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- [ 0.068282] PM: Registered nosave memory: [mem 0x84e83000-0x84e83fff]
- [ 0.068283] PM: Registered nosave memory: [mem 0x84e84000-0x84e84fff]
- [ 0.068284] PM: Registered nosave memory: [mem 0x8cbb9000-0x8d061fff]
- [ 0.068285] PM: Registered nosave memory: [mem 0x8d11b000-0x8d4c4fff]
- [ 0.068285] PM: Registered nosave memory: [mem 0x8d4c5000-0x8dffefff]
- [ 0.068286] PM: Registered nosave memory: [mem 0x8e000000-0xcf7fffff]
- [ 0.068286] PM: Registered nosave memory: [mem 0xcf800000-0xf7ffffff]
- [ 0.068287] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
- [ 0.068287] PM: Registered nosave memory: [mem 0xfc000000-0xfdffffff]
- [ 0.068287] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
- [ 0.068288] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
- [ 0.068288] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
- [ 0.068289] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
- [ 0.068289] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
- [ 0.068289] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
- [ 0.068290] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
- [ 0.068290] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
- [ 0.068290] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
- [ 0.068292] [mem 0xcf800000-0xf7ffffff] available for PCI devices
- [ 0.068292] Booting paravirtualized kernel on bare hardware
- [ 0.068294] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
- [ 0.068298] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1
- [ 0.068428] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144
- [ 0.068432] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152
- [ 0.068433] pcpu-alloc: [0] 0 1 2 3 4 5 - -
- [ 0.068451] Built 1 zonelists, mobility grouping on. Total pages: 7984357
- [ 0.068452] Policy zone: Normal
- [ 0.068453] Kernel command line: BOOT_IMAGE=/ROOT/pve-1@/boot/vmlinuz-5.4.34-1-pve root=ZFS=rpool/ROOT/pve-1 ro root=ZFS=rpool/ROOT/pve-1 boot=zfs kvm.ignore_msrs=1 intel_iommu=on video=vesafb:off,efifb:off quiet
- [ 0.068529] DMAR: IOMMU enabled
- [ 0.069879] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
- [ 0.070537] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
- [ 0.070584] mem auto-init: stack:off, heap alloc:on, heap free:off
- [ 0.073239] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.073240] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.123903] Memory: 31745988K/32444464K available (14339K kernel code, 2405K rwdata, 5076K rodata, 2712K init, 4984K bss, 698476K reserved, 0K cma-reserved)
- [ 0.123909] random: get_random_u64 called from __kmem_cache_create+0x42/0x530 with crng_init=0
- [ 0.123996] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.124005] Kernel/User page tables isolation: enabled
- [ 0.124014] ftrace: allocating 45019 entries in 176 pages
- [ 0.137487] rcu: Hierarchical RCU implementation.
- [ 0.137488] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=6.
- [ 0.137488] Tasks RCU enabled.
- [ 0.137489] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.137489] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.139622] NR_IRQS: 524544, nr_irqs: 1536, preallocated irqs: 16
- [ 0.139889] random: crng done (trusting CPU's manufacturer)
- [ 0.142223] Console: colour VGA+ 80x25
- [ 0.142226] printk: console [tty0] enabled
- [ 0.142238] ACPI: Core revision 20190816
- [ 0.142597] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
- [ 0.142661] APIC: Switch to symmetric I/O mode setup
- [ 0.142662] DMAR: Host address width 39
- [ 0.142663] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
- [ 0.142667] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
- [ 0.142668] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
- [ 0.142670] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
- [ 0.142671] DMAR: RMRR base: 0x0000008d928000 end: 0x0000008db71fff
- [ 0.142671] DMAR: RMRR base: 0x0000008f000000 end: 0x000000cf7fffff
- [ 0.142673] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
- [ 0.142673] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
- [ 0.142674] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
- [ 0.144116] DMAR-IR: Enabled IRQ remapping in x2apic mode
- [ 0.144117] x2apic enabled
- [ 0.144128] Switched APIC routing to cluster x2apic.
- [ 0.148142] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.166773] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e44fb6c2ab, max_idle_ns: 440795206594 ns
- [ 0.166777] Calibrating delay loop (skipped), value calculated using timer frequency.. 4199.88 BogoMIPS (lpj=8399776)
- [ 0.166778] pid_max: default: 32768 minimum: 301
- [ 0.166802] LSM: Security Framework initializing
- [ 0.166810] Yama: becoming mindful.
- [ 0.166835] AppArmor: AppArmor initialized
- [ 0.166895] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
- [ 0.166933] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
- [ 0.166943] *** VALIDATE tmpfs ***
- [ 0.167047] *** VALIDATE proc ***
- [ 0.167084] *** VALIDATE cgroup1 ***
- [ 0.167084] *** VALIDATE cgroup2 ***
- [ 0.167125] mce: CPU0: Thermal monitoring enabled (TM1)
- [ 0.167146] process: using mwait in idle threads
- [ 0.167148] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
- [ 0.167149] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
- [ 0.167151] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
- [ 0.167152] Spectre V2 : Mitigation: Full generic retpoline
- [ 0.167152] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
- [ 0.167153] Spectre V2 : Enabling Restricted Speculation for firmware calls
- [ 0.167154] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
- [ 0.167155] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
- [ 0.167157] TAA: Vulnerable: Clear CPU buffers attempted, no microcode
- [ 0.167158] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
- [ 0.167361] Freeing SMP alternatives memory: 40K
- [ 0.169086] TSC deadline timer enabled
- [ 0.169090] smpboot: CPU0: Intel(R) Core(TM) i5-8500T CPU @ 2.10GHz (family: 0x6, model: 0x9e, stepping: 0xa)
- [ 0.169165] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
- [ 0.169169] ... version: 4
- [ 0.169169] ... bit width: 48
- [ 0.169170] ... generic registers: 8
- [ 0.169170] ... value mask: 0000ffffffffffff
- [ 0.169171] ... max period: 00007fffffffffff
- [ 0.169171] ... fixed-purpose events: 3
- [ 0.169171] ... event mask: 00000007000000ff
- [ 0.169200] rcu: Hierarchical SRCU implementation.
- [ 0.169955] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
- [ 0.170002] smp: Bringing up secondary CPUs ...
- [ 0.170067] x86: Booting SMP configuration:
- [ 0.170068] .... node #0, CPUs: #1 #2 #3 #4 #5
- [ 0.170411] smp: Brought up 1 node, 6 CPUs
- [ 0.170411] smpboot: Max logical packages: 1
- [ 0.170411] smpboot: Total of 6 processors activated (25199.32 BogoMIPS)
- [ 0.171304] devtmpfs: initialized
- [ 0.171304] x86/mm: Memory block size: 128MB
- [ 0.173704] PM: Registering ACPI NVS region [mem 0x84e83000-0x84e83fff] (4096 bytes)
- [ 0.173704] PM: Registering ACPI NVS region [mem 0x8d11b000-0x8d4c4fff] (3842048 bytes)
- [ 0.173704] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.173704] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
- [ 0.173704] pinctrl core: initialized pinctrl subsystem
- [ 0.173704] PM: RTC time: 00:37:12, date: 2020-05-13
- [ 0.173704] NET: Registered protocol family 16
- [ 0.174818] audit: initializing netlink subsys (disabled)
- [ 0.174824] audit: type=2000 audit(1589330232.032:1): state=initialized audit_enabled=0 res=1
- [ 0.174850] EISA bus registered
- [ 0.174855] cpuidle: using governor ladder
- [ 0.174858] cpuidle: using governor menu
- [ 0.174897] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.174897] ACPI: bus type PCI registered
- [ 0.174897] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.174897] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 0.174897] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
- [ 0.174897] PCI: Using configuration type 1 for base access
- [ 0.177764] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.177764] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.178835] ACPI: Added _OSI(Module Device)
- [ 0.178835] ACPI: Added _OSI(Processor Device)
- [ 0.178836] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.178836] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.178837] ACPI: Added _OSI(Linux-Dell-Video)
- [ 0.178838] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
- [ 0.178838] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
- [ 0.219693] ACPI: 12 ACPI AML tables successfully acquired and loaded
- [ 1.237717] ACPI: Dynamic OEM Table Load:
- [ 1.237722] ACPI: SSDT 0xFFFF93A14BD75800 000549 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
- [ 1.239110] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
- [ 1.240511] ACPI: Dynamic OEM Table Load:
- [ 1.240515] ACPI: SSDT 0xFFFF93A14C362C00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
- [ 1.241864] ACPI: Dynamic OEM Table Load:
- [ 1.241867] ACPI: SSDT 0xFFFF93A14C36E300 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
- [ 1.243137] ACPI: Dynamic OEM Table Load:
- [ 1.243141] ACPI: SSDT 0xFFFF93A14BD73000 000628 (v02 PmRef HwpLvt 00003000 INTL 20160422)
- [ 1.244782] ACPI: Dynamic OEM Table Load:
- [ 1.244788] ACPI: SSDT 0xFFFF93A14CC6A000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
- [ 1.246817] ACPI: Dynamic OEM Table Load:
- [ 1.246821] ACPI: SSDT 0xFFFF93A14C360400 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
- [ 1.248211] ACPI: Dynamic OEM Table Load:
- [ 1.248215] ACPI: SSDT 0xFFFF93A14C360000 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
- [ 1.252719] ACPI: Interpreter enabled
- [ 1.252755] ACPI: (supports S0 S3 S4 S5)
- [ 1.252756] ACPI: Using IOAPIC for interrupt routing
- [ 1.252790] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 1.253829] ACPI: Enabled 6 GPEs in block 00 to 7F
- [ 1.261472] ACPI: Power Resource [WRST] (on)
- [ 1.278827] ACPI: Power Resource [FN00] (off)
- [ 1.278915] ACPI: Power Resource [FN01] (off)
- [ 1.279003] ACPI: Power Resource [FN02] (off)
- [ 1.279089] ACPI: Power Resource [FN03] (off)
- [ 1.279177] ACPI: Power Resource [FN04] (off)
- [ 1.280617] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
- [ 1.280622] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
- [ 1.280800] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
- [ 1.280968] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
- [ 1.280969] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
- [ 1.281744] PCI host bridge to bus 0000:00
- [ 1.281745] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- [ 1.281746] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 1.281747] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 1.281748] pci_bus 0000:00: root bus resource [mem 0xcf800000-0xf7ffffff window]
- [ 1.281748] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
- [ 1.281749] pci_bus 0000:00: root bus resource [bus 00-3e]
- [ 1.281757] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
- [ 1.282096] pci 0000:00:02.0: [8086:3e92] type 00 class 0x030000
- [ 1.282104] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
- [ 1.282108] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
- [ 1.282111] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
- [ 1.282269] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
- [ 1.282279] pci 0000:00:08.0: reg 0x10: [mem 0xf724e000-0xf724efff 64bit]
- [ 1.282432] pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
- [ 1.282451] pci 0000:00:14.0: reg 0x10: [mem 0xf7230000-0xf723ffff 64bit]
- [ 1.282507] pci 0000:00:14.0: PME# supported from D3hot D3cold
- [ 1.282739] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
- [ 1.282755] pci 0000:00:16.0: reg 0x10: [mem 0xf724d000-0xf724dfff 64bit]
- [ 1.282801] pci 0000:00:16.0: PME# supported from D3hot
- [ 1.283002] pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
- [ 1.283016] pci 0000:00:17.0: reg 0x10: [mem 0xf7248000-0xf7249fff]
- [ 1.283022] pci 0000:00:17.0: reg 0x14: [mem 0xf724c000-0xf724c0ff]
- [ 1.283028] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
- [ 1.283033] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
- [ 1.283039] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
- [ 1.283045] pci 0000:00:17.0: reg 0x24: [mem 0xf724b000-0xf724b7ff]
- [ 1.283078] pci 0000:00:17.0: PME# supported from D3hot
- [ 1.283231] pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400
- [ 1.283296] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 1.283484] pci 0000:00:1b.2: [8086:a2e9] type 01 class 0x060400
- [ 1.283554] pci 0000:00:1b.2: PME# supported from D0 D3hot D3cold
- [ 1.283566] pci 0000:00:1b.2: Intel SPT PCH root port ACS workaround enabled
- [ 1.283748] pci 0000:00:1b.4: [8086:a2eb] type 01 class 0x060400
- [ 1.283818] pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
- [ 1.283830] pci 0000:00:1b.4: Intel SPT PCH root port ACS workaround enabled
- [ 1.284023] pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
- [ 1.284090] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 1.284286] pci 0000:00:1c.5: [8086:a295] type 01 class 0x060400
- [ 1.284349] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 1.284359] pci 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
- [ 1.284536] pci 0000:00:1c.6: [8086:a296] type 01 class 0x060400
- [ 1.284598] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
- [ 1.284608] pci 0000:00:1c.6: Intel SPT PCH root port ACS workaround enabled
- [ 1.284786] pci 0000:00:1c.7: [8086:a297] type 01 class 0x060400
- [ 1.284847] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
- [ 1.284858] pci 0000:00:1c.7: Intel SPT PCH root port ACS workaround enabled
- [ 1.285034] pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400
- [ 1.285105] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 1.285117] pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
- [ 1.285319] pci 0000:00:1f.0: [8086:a2c9] type 00 class 0x060100
- [ 1.285556] pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
- [ 1.285569] pci 0000:00:1f.2: reg 0x10: [mem 0xf7244000-0xf7247fff]
- [ 1.285753] pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
- [ 1.285778] pci 0000:00:1f.3: reg 0x10: [mem 0xf7240000-0xf7243fff 64bit]
- [ 1.285806] pci 0000:00:1f.3: reg 0x20: [mem 0xf7220000-0xf722ffff 64bit]
- [ 1.285850] pci 0000:00:1f.3: PME# supported from D3hot D3cold
- [ 1.286100] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
- [ 1.286159] pci 0000:00:1f.4: reg 0x10: [mem 0xf724a000-0xf724a0ff 64bit]
- [ 1.286229] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
- [ 1.286445] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
- [ 1.286471] pci 0000:00:1f.6: reg 0x10: [mem 0xf7200000-0xf721ffff]
- [ 1.286573] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
- [ 1.286779] acpiphp: Slot [1] registered
- [ 1.286783] pci 0000:00:1b.0: PCI bridge to [bus 01]
- [ 1.286845] pci 0000:00:1b.2: PCI bridge to [bus 02]
- [ 1.286903] pci 0000:00:1b.4: PCI bridge to [bus 03]
- [ 1.286972] acpiphp: Slot [1-1] registered
- [ 1.286979] pci 0000:00:1c.0: PCI bridge to [bus 04]
- [ 1.287060] pci 0000:05:00.0: [8086:1539] type 00 class 0x020000
- [ 1.287093] pci 0000:05:00.0: reg 0x10: [mem 0xf7100000-0xf711ffff]
- [ 1.287116] pci 0000:05:00.0: reg 0x18: [io 0xe000-0xe01f]
- [ 1.287129] pci 0000:05:00.0: reg 0x1c: [mem 0xf7120000-0xf7123fff]
- [ 1.287256] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
- [ 1.287357] pci 0000:00:1c.5: PCI bridge to [bus 05]
- [ 1.287359] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
- [ 1.287361] pci 0000:00:1c.5: bridge window [mem 0xf7100000-0xf71fffff]
- [ 1.287438] pci 0000:06:00.0: [8086:24fd] type 00 class 0x028000
- [ 1.287487] pci 0000:06:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit]
- [ 1.287671] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
- [ 1.287849] pci 0000:00:1c.6: PCI bridge to [bus 06]
- [ 1.287852] pci 0000:00:1c.6: bridge window [mem 0xf7000000-0xf70fffff]
- [ 1.287908] pci 0000:00:1c.7: PCI bridge to [bus 07]
- [ 1.287965] pci 0000:00:1d.0: PCI bridge to [bus 08]
- [ 1.289340] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 1.289396] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 1.289450] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 1.289504] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 1.289557] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 1.289611] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 1.289664] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 1.289718] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 1.290348] iommu: Default domain type: Translated
- [ 1.290348] SCSI subsystem initialized
- [ 1.290348] libata version 3.00 loaded.
- [ 1.290348] pci 0000:00:02.0: vgaarb: setting as boot VGA device
- [ 1.290348] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
- [ 1.290348] pci 0000:00:02.0: vgaarb: bridge control possible
- [ 1.290348] vgaarb: loaded
- [ 1.290348] ACPI: bus type USB registered
- [ 1.290348] usbcore: registered new interface driver usbfs
- [ 1.290348] usbcore: registered new interface driver hub
- [ 1.290348] usbcore: registered new device driver usb
- [ 1.290348] pps_core: LinuxPPS API ver. 1 registered
- [ 1.290348] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 1.290348] PTP clock support registered
- [ 1.290348] EDAC MC: Ver: 3.0.0
- [ 1.290348] PCI: Using ACPI for IRQ routing
- [ 1.296883] PCI: pci_cache_line_size set to 64 bytes
- [ 1.296934] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
- [ 1.296935] e820: reserve RAM buffer [mem 0x84e83000-0x87ffffff]
- [ 1.296935] e820: reserve RAM buffer [mem 0x8cbb9000-0x8fffffff]
- [ 1.296936] e820: reserve RAM buffer [mem 0x8d11b000-0x8fffffff]
- [ 1.296937] e820: reserve RAM buffer [mem 0x8e000000-0x8fffffff]
- [ 1.296937] e820: reserve RAM buffer [mem 0x82f800000-0x82fffffff]
- [ 1.297003] NetLabel: Initializing
- [ 1.297003] NetLabel: domain hash size = 128
- [ 1.297003] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 1.297014] NetLabel: unlabeled traffic allowed by default
- [ 1.297023] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 1.297023] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
- [ 1.298777] clocksource: Switched to clocksource tsc-early
- [ 1.307443] *** VALIDATE bpf ***
- [ 1.307493] VFS: Disk quotas dquot_6.6.0
- [ 1.307502] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.307519] *** VALIDATE ramfs ***
- [ 1.307521] *** VALIDATE hugetlbfs ***
- [ 1.307579] AppArmor: AppArmor Filesystem Enabled
- [ 1.307597] pnp: PnP ACPI init
- [ 1.307861] system 00:00: [io 0x0a00-0x0a2f] has been reserved
- [ 1.307862] system 00:00: [io 0x0a30-0x0a3f] has been reserved
- [ 1.307863] system 00:00: [io 0x0a40-0x0a4f] has been reserved
- [ 1.307866] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 1.308053] system 00:01: [io 0x0680-0x069f] has been reserved
- [ 1.308054] system 00:01: [io 0xffff] has been reserved
- [ 1.308055] system 00:01: [io 0xffff] has been reserved
- [ 1.308056] system 00:01: [io 0xffff] has been reserved
- [ 1.308057] system 00:01: [io 0x1800-0x18fe] has been reserved
- [ 1.308057] system 00:01: [io 0x164e-0x164f] has been reserved
- [ 1.308060] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 1.308144] system 00:02: [io 0x0800-0x087f] has been reserved
- [ 1.308147] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 1.308163] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 1.308195] system 00:04: [io 0x1854-0x1857] has been reserved
- [ 1.308197] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 1.308432] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 1.308433] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 1.308434] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 1.308435] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
- [ 1.308436] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 1.308437] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
- [ 1.308437] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 1.308438] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
- [ 1.308439] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 1.308440] system 00:05: [mem 0xf7fe0000-0xf7ffffff] has been reserved
- [ 1.308443] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 1.308479] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
- [ 1.308480] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
- [ 1.308481] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
- [ 1.308482] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
- [ 1.308483] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
- [ 1.308484] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
- [ 1.308485] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
- [ 1.308487] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 1.308778] system 00:07: [io 0xff00-0xfffe] has been reserved
- [ 1.308781] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 1.309975] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
- [ 1.309976] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
- [ 1.309977] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
- [ 1.309980] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 1.310888] pnp: PnP ACPI: found 9 devices
- [ 1.311806] thermal_sys: Registered thermal governor 'fair_share'
- [ 1.311807] thermal_sys: Registered thermal governor 'bang_bang'
- [ 1.311807] thermal_sys: Registered thermal governor 'step_wise'
- [ 1.311808] thermal_sys: Registered thermal governor 'user_space'
- [ 1.311808] thermal_sys: Registered thermal governor 'power_allocator'
- [ 1.316300] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 1.316327] pci 0000:00:1b.0: PCI bridge to [bus 01]
- [ 1.316335] pci 0000:00:1b.2: PCI bridge to [bus 02]
- [ 1.316341] pci 0000:00:1b.4: PCI bridge to [bus 03]
- [ 1.316348] pci 0000:00:1c.0: PCI bridge to [bus 04]
- [ 1.316356] pci 0000:00:1c.5: PCI bridge to [bus 05]
- [ 1.316358] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
- [ 1.316361] pci 0000:00:1c.5: bridge window [mem 0xf7100000-0xf71fffff]
- [ 1.316365] pci 0000:00:1c.6: PCI bridge to [bus 06]
- [ 1.316367] pci 0000:00:1c.6: bridge window [mem 0xf7000000-0xf70fffff]
- [ 1.316372] pci 0000:00:1c.7: PCI bridge to [bus 07]
- [ 1.316378] pci 0000:00:1d.0: PCI bridge to [bus 08]
- [ 1.316385] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
- [ 1.316386] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
- [ 1.316387] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 1.316388] pci_bus 0000:00: resource 7 [mem 0xcf800000-0xf7ffffff window]
- [ 1.316388] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
- [ 1.316389] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
- [ 1.316390] pci_bus 0000:05: resource 1 [mem 0xf7100000-0xf71fffff]
- [ 1.316391] pci_bus 0000:06: resource 1 [mem 0xf7000000-0xf70fffff]
- [ 1.316532] NET: Registered protocol family 2
- [ 1.316650] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
- [ 1.316773] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 1.316998] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
- [ 1.317053] TCP: Hash tables configured (established 262144 bind 65536)
- [ 1.317097] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
- [ 1.317163] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
- [ 1.317227] NET: Registered protocol family 1
- [ 1.317232] NET: Registered protocol family 44
- [ 1.317240] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 1.382932] pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x645 took 64144 usecs
- [ 1.382966] PCI: CLS 64 bytes, default 64
- [ 1.383000] Trying to unpack rootfs image as initramfs...
- [ 1.850828] Freeing initrd memory: 41036K
- [ 1.850854] DMAR: No ATSR found
- [ 1.850883] DMAR: dmar0: Using Queued invalidation
- [ 1.850885] DMAR: dmar1: Using Queued invalidation
- [ 1.851185] pci 0000:00:00.0: Adding to iommu group 0
- [ 1.930407] pci 0000:00:02.0: Adding to iommu group 1
- [ 1.930469] pci 0000:00:08.0: Adding to iommu group 2
- [ 1.930689] pci 0000:00:14.0: Adding to iommu group 3
- [ 1.930720] pci 0000:00:16.0: Adding to iommu group 4
- [ 1.930760] pci 0000:00:17.0: Adding to iommu group 5
- [ 1.930800] pci 0000:00:1b.0: Adding to iommu group 6
- [ 1.930843] pci 0000:00:1b.2: Adding to iommu group 7
- [ 1.930875] pci 0000:00:1b.4: Adding to iommu group 8
- [ 1.930926] pci 0000:00:1c.0: Adding to iommu group 9
- [ 1.930957] pci 0000:00:1c.5: Adding to iommu group 10
- [ 1.931002] pci 0000:00:1c.6: Adding to iommu group 11
- [ 1.931034] pci 0000:00:1c.7: Adding to iommu group 12
- [ 1.931080] pci 0000:00:1d.0: Adding to iommu group 13
- [ 1.932347] pci 0000:00:1f.0: Adding to iommu group 14
- [ 1.932355] pci 0000:00:1f.2: Adding to iommu group 14
- [ 1.932362] pci 0000:00:1f.3: Adding to iommu group 14
- [ 1.932370] pci 0000:00:1f.4: Adding to iommu group 14
- [ 1.932409] pci 0000:00:1f.6: Adding to iommu group 15
- [ 1.932440] pci 0000:05:00.0: Adding to iommu group 16
- [ 1.932481] pci 0000:06:00.0: Adding to iommu group 17
- [ 1.932667] DMAR: Intel(R) Virtualization Technology for Directed I/O
- [ 1.934034] check: Scanning for low memory corruption every 60 seconds
- [ 1.935579] Initialise system trusted keyrings
- [ 1.935585] Key type blacklist registered
- [ 1.935605] workingset: timestamp_bits=36 max_order=23 bucket_order=0
- [ 1.936519] zbud: loaded
- [ 1.936776] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.936880] fuse: init (API version 7.31)
- [ 1.936891] *** VALIDATE fuse ***
- [ 1.936892] *** VALIDATE fuse ***
- [ 1.936952] Platform Keyring initialized
- [ 1.940568] Key type asymmetric registered
- [ 1.940569] Asymmetric key parser 'x509' registered
- [ 1.940581] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
- [ 1.940605] io scheduler mq-deadline registered
- [ 1.941057] pcieport 0000:00:1b.2: AER: enabled with IRQ 123
- [ 1.941232] pcieport 0000:00:1b.4: AER: enabled with IRQ 124
- [ 1.941542] pcieport 0000:00:1c.5: AER: enabled with IRQ 126
- [ 1.941704] pcieport 0000:00:1c.6: AER: enabled with IRQ 127
- [ 1.941877] pcieport 0000:00:1c.7: AER: enabled with IRQ 128
- [ 1.942042] pcieport 0000:00:1d.0: AER: enabled with IRQ 129
- [ 1.942092] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 1.942133] intel_idle: MWAIT substates: 0x11142120
- [ 1.942133] intel_idle: v0.4.1 model 0x9E
- [ 1.942414] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 1.942551] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
- [ 1.942565] ACPI: Sleep Button [SLPB]
- [ 1.942586] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
- [ 1.942595] ACPI: Power Button [PWRB]
- [ 1.942614] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- [ 1.942669] ACPI: Power Button [PWRF]
- [ 2.954869] tsc: Refined TSC clocksource calibration: 2111.999 MHz
- [ 2.954872] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e7177b097e, max_idle_ns: 440795281886 ns
- [ 2.954917] clocksource: Switched to clocksource tsc
- [ 3.981663] ACPI: Invalid passive threshold
- [ 3.981886] thermal LNXTHERM:00: registered as thermal_zone0
- [ 3.981887] ACPI: Thermal Zone [TZ10] (17 C)
- [ 3.982248] thermal LNXTHERM:01: registered as thermal_zone1
- [ 3.982248] ACPI: Thermal Zone [TZ00] (28 C)
- [ 3.982380] thermal LNXTHERM:02: registered as thermal_zone2
- [ 3.982381] ACPI: Thermal Zone [TZ01] (30 C)
- [ 3.982581] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 3.984055] Linux agpgart interface v0.103
- [ 3.985617] loop: module loaded
- [ 3.986016] libphy: Fixed MDIO Bus: probed
- [ 3.986016] tun: Universal TUN/TAP device driver, 1.6
- [ 3.986090] PPP generic driver version 2.4.2
- [ 3.986128] VFIO - User Level meta-driver version: 0.3
- [ 3.986299] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.986301] ehci-pci: EHCI PCI platform driver
- [ 3.986307] ehci-platform: EHCI generic platform driver
- [ 3.986313] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.986314] ohci-pci: OHCI PCI platform driver
- [ 3.986319] ohci-platform: OHCI generic platform driver
- [ 3.986336] uhci_hcd: USB Universal Host Controller Interface driver
- [ 3.986444] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 3.986447] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
- [ 3.987514] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
- [ 3.987517] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
- [ 3.987644] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
- [ 3.987645] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.987645] usb usb1: Product: xHCI Host Controller
- [ 3.987646] usb usb1: Manufacturer: Linux 5.4.34-1-pve xhci-hcd
- [ 3.987647] usb usb1: SerialNumber: 0000:00:14.0
- [ 3.987746] hub 1-0:1.0: USB hub found
- [ 3.987761] hub 1-0:1.0: 16 ports detected
- [ 3.989252] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 3.989254] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
- [ 3.989256] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
- [ 3.989277] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
- [ 3.989277] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.989278] usb usb2: Product: xHCI Host Controller
- [ 3.989278] usb usb2: Manufacturer: Linux 5.4.34-1-pve xhci-hcd
- [ 3.989279] usb usb2: SerialNumber: 0000:00:14.0
- [ 3.989372] hub 2-0:1.0: USB hub found
- [ 3.989382] hub 2-0:1.0: 10 ports detected
- [ 3.990542] i8042: PNP: No PS/2 controller found.
- [ 3.990603] mousedev: PS/2 mouse device common for all mice
- [ 3.990675] rtc_cmos 00:03: RTC can wake from S4
- [ 3.991184] rtc_cmos 00:03: registered as rtc0
- [ 3.991192] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 3.991195] i2c /dev entries driver
- [ 3.991221] device-mapper: uevent: version 1.0.3
- [ 3.991293] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
- [ 3.991304] platform eisa.0: Probing EISA bus 0
- [ 3.991305] platform eisa.0: EISA: Cannot allocate resource for mainboard
- [ 3.991306] platform eisa.0: Cannot allocate resource for EISA slot 1
- [ 3.991307] platform eisa.0: Cannot allocate resource for EISA slot 2
- [ 3.991307] platform eisa.0: Cannot allocate resource for EISA slot 3
- [ 3.991308] platform eisa.0: Cannot allocate resource for EISA slot 4
- [ 3.991309] platform eisa.0: Cannot allocate resource for EISA slot 5
- [ 3.991309] platform eisa.0: Cannot allocate resource for EISA slot 6
- [ 3.991310] platform eisa.0: Cannot allocate resource for EISA slot 7
- [ 3.991310] platform eisa.0: Cannot allocate resource for EISA slot 8
- [ 3.991311] platform eisa.0: EISA: Detected 0 cards
- [ 3.991326] intel_pstate: Intel P-state driver initializing
- [ 3.991938] intel_pstate: HWP enabled
- [ 3.992110] ledtrig-cpu: registered to indicate activity on CPUs
- [ 3.992157] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:06 [mem 0xfdb00000-0xfdffffff]
- [ 3.992160] caller pmc_core_probe+0x8e/0x2c7 mapping multiple BARs
- [ 3.992170] intel_pmc_core INT33A1:00: initialized
- [ 3.992235] drop_monitor: Initializing network drop monitor service
- [ 3.992372] NET: Registered protocol family 10
- [ 3.999606] Segment Routing with IPv6
- [ 3.999633] NET: Registered protocol family 17
- [ 3.999647] Bridge firewalling registered
- [ 3.999802] Key type dns_resolver registered
- [ 4.000491] RAS: Correctable Errors collector initialized.
- [ 4.000509] microcode: sig=0x906ea, pf=0x2, revision=0x96
- [ 4.000733] microcode: Microcode Update Driver: v2.2.
- [ 4.000736] IPI shorthand broadcast: enabled
- [ 4.000740] sched_clock: Marking stable (3997810397, 2920010)->(4004175232, -3444825)
- [ 4.000923] registered taskstats version 1
- [ 4.000930] Loading compiled-in X.509 certificates
- [ 4.002627] Loaded X.509 cert 'Build time autogenerated kernel key: c449e5885e9d432bd16bf0ec456145bfaa491117'
- [ 4.002650] zswap: loaded using pool lzo/zbud
- [ 4.002723] Key type ._fscrypt registered
- [ 4.002723] Key type .fscrypt registered
- [ 4.009834] Key type big_key registered
- [ 4.013611] Key type encrypted registered
- [ 4.013613] AppArmor: AppArmor sha1 policy hashing enabled
- [ 4.013619] ima: No TPM chip found, activating TPM-bypass!
- [ 4.013623] ima: Allocated hash algorithm: sha1
- [ 4.013639] ima: No architecture policies found
- [ 4.013643] evm: Initialising EVM extended attributes:
- [ 4.013644] evm: security.selinux
- [ 4.013644] evm: security.SMACK64
- [ 4.013645] evm: security.SMACK64EXEC
- [ 4.013645] evm: security.SMACK64TRANSMUTE
- [ 4.013645] evm: security.SMACK64MMAP
- [ 4.013645] evm: security.apparmor
- [ 4.013646] evm: security.ima
- [ 4.013646] evm: security.capability
- [ 4.013646] evm: HMAC attrs: 0x1
- [ 4.014929] PM: Magic number: 4:547:607
- [ 4.015134] rtc_cmos 00:03: setting system clock to 2020-05-13T00:37:16 UTC (1589330236)
- [ 4.016397] Freeing unused decrypted memory: 2040K
- [ 4.016773] Freeing unused kernel image memory: 2712K
- [ 4.046908] Write protecting the kernel read-only data: 22528k
- [ 4.047507] Freeing unused kernel image memory: 2008K
- [ 4.047737] Freeing unused kernel image memory: 1068K
- [ 4.054487] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 4.054488] x86/mm: Checking user space page tables
- [ 4.061139] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 4.061140] Run /init as init process
- [ 4.159172] fjes: module verification failed: signature and/or required key missing - tainting kernel
- [ 4.167594] ahci 0000:00:17.0: version 3.0
- [ 4.167867] dca service started, version 1.12.1
- [ 4.168985] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
- [ 4.168986] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 4.169224] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 4.169225] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 4.169376] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
- [ 4.180349] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x3d impl SATA mode
- [ 4.180351] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
- [ 4.196674] pps pps0: new PPS source ptp0
- [ 4.196752] igb 0000:05:00.0: added PHC on eth0
- [ 4.196753] igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
- [ 4.196754] igb 0000:05:00.0: eth0: (PCIe:2.5Gb/s:Width x1) e0:d5:5e:af:2e:12
- [ 4.196755] igb 0000:05:00.0: eth0: PBA No: FFFFFF-0FF
- [ 4.196756] igb 0000:05:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
- [ 4.223719] igb 0000:05:00.0 enp5s0: renamed from eth0
- [ 4.239391] scsi host0: ahci
- [ 4.239561] scsi host1: ahci
- [ 4.239690] scsi host2: ahci
- [ 4.250943] scsi host3: ahci
- [ 4.251148] scsi host4: ahci
- [ 4.251342] scsi host5: ahci
- [ 4.251379] ata1: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b100 irq 131
- [ 4.251379] ata2: DUMMY
- [ 4.251380] ata3: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b200 irq 131
- [ 4.251382] ata4: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b280 irq 131
- [ 4.251383] ata5: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b300 irq 131
- [ 4.251384] ata6: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b380 irq 131
- [ 4.339079] usb 2-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
- [ 4.372813] usb 2-3: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.04
- [ 4.372814] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 4.372814] usb 2-3: Product: 4-Port USB 3.0 Hub
- [ 4.372815] usb 2-3: Manufacturer: Generic
- [ 4.377051] hub 2-3:1.0: USB hub found
- [ 4.378286] hub 2-3:1.0: 4 ports detected
- [ 4.494832] usb 1-3: new high-speed USB device number 2 using xhci_hcd
- [ 4.525896] usb 1-3: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.04
- [ 4.525897] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 4.525898] usb 1-3: Product: 4-Port USB 2.0 Hub
- [ 4.525898] usb 1-3: Manufacturer: Generic
- [ 4.526810] hub 1-3:1.0: USB hub found
- [ 4.527415] hub 1-3:1.0: 4 ports detected
- [ 4.566021] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 4.566043] ata1: SATA link down (SStatus 4 SControl 300)
- [ 4.566059] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 4.566195] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
- [ 4.566293] No Local Variables are initialized for Method [_GTF]
- [ 4.566294] No Arguments are initialized for method [_GTF]
- [ 4.566296] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
- [ 4.566424] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
- [ 4.566514] No Local Variables are initialized for Method [_GTF]
- [ 4.566514] No Arguments are initialized for method [_GTF]
- [ 4.566516] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
- [ 4.566651] ata3.00: ATA-9: ADATA SU800, R0918B, max UDMA/133
- [ 4.566652] ata3.00: 2000409264 sectors, multi 2: LBA48 NCQ (depth 32), AA
- [ 4.566672] ata4.00: ATA-9: ADATA SU800, R0918B, max UDMA/133
- [ 4.566673] ata4.00: 2000409264 sectors, multi 2: LBA48 NCQ (depth 32), AA
- [ 4.567088] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
- [ 4.567172] No Local Variables are initialized for Method [_GTF]
- [ 4.567173] No Arguments are initialized for method [_GTF]
- [ 4.567174] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
- [ 4.567320] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT3._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
- [ 4.567429] No Local Variables are initialized for Method [_GTF]
- [ 4.567430] No Arguments are initialized for method [_GTF]
- [ 4.567431] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT3._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
- [ 4.567728] ata3.00: configured for UDMA/133
- [ 4.567773] ata4.00: configured for UDMA/133
- [ 4.567865] scsi 2:0:0:0: Direct-Access ATA ADATA SU800 8B PQ: 0 ANSI: 5
- [ 4.568010] sd 2:0:0:0: Attached scsi generic sg0 type 0
- [ 4.568187] sd 2:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
- [ 4.568215] scsi 3:0:0:0: Direct-Access ATA ADATA SU800 8B PQ: 0 ANSI: 5
- [ 4.568221] sd 2:0:0:0: [sda] Write Protect is off
- [ 4.568238] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 4.568332] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 4.568435] sd 3:0:0:0: Attached scsi generic sg1 type 0
- [ 4.568478] sd 3:0:0:0: [sdb] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
- [ 4.568486] sd 3:0:0:0: [sdb] Write Protect is off
- [ 4.568487] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 4.568498] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 4.569742] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
- [ 4.570022] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 4.570704] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT4._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
- [ 4.570790] No Local Variables are initialized for Method [_GTF]
- [ 4.570791] No Arguments are initialized for method [_GTF]
- [ 4.570792] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT4._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
- [ 4.571014] ata5.00: ATA-9: ADATA SU800, Q1204A, max UDMA/133
- [ 4.571015] ata5.00: 2000409264 sectors, multi 2: LBA48 NCQ (depth 32), AA
- [ 4.571328] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT4._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
- [ 4.571440] No Local Variables are initialized for Method [_GTF]
- [ 4.571440] No Arguments are initialized for method [_GTF]
- [ 4.571442] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT4._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
- [ 4.571716] ata5.00: configured for UDMA/133
- [ 4.571800] scsi 4:0:0:0: Direct-Access ATA ADATA SU800 4A PQ: 0 ANSI: 5
- [ 4.571959] sd 4:0:0:0: Attached scsi generic sg2 type 0
- [ 4.572061] sd 4:0:0:0: [sdc] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
- [ 4.572069] sd 4:0:0:0: [sdc] Write Protect is off
- [ 4.572070] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 4.572082] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 4.574105] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 4.574218] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT5._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
- [ 4.574328] No Local Variables are initialized for Method [_GTF]
- [ 4.574329] No Arguments are initialized for method [_GTF]
- [ 4.574330] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT5._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
- [ 4.574471] ata6.00: ATA-9: ADATA SU800, R0918B, max UDMA/133
- [ 4.574472] ata6.00: 2000409264 sectors, multi 2: LBA48 NCQ (depth 32), AA
- [ 4.574741] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT5._GTF.DSSP], AE_NOT_FOUND (20190816/psargs-330)
- [ 4.574865] No Local Variables are initialized for Method [_GTF]
- [ 4.574866] No Arguments are initialized for method [_GTF]
- [ 4.574867] ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT5._GTF due to previous error (AE_NOT_FOUND) (20190816/psparse-531)
- [ 4.575262] ata6.00: configured for UDMA/133
- [ 4.575345] scsi 5:0:0:0: Direct-Access ATA ADATA SU800 8B PQ: 0 ANSI: 5
- [ 4.575513] sd 5:0:0:0: Attached scsi generic sg3 type 0
- [ 4.575661] sd 5:0:0:0: [sdd] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
- [ 4.575696] sd 5:0:0:0: [sdd] Write Protect is off
- [ 4.575697] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
- [ 4.575719] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 4.588341] sdb: sdb1 sdb2 sdb3
- [ 4.588561] sda: sda1 sda2 sda3
- [ 4.588628] sd 3:0:0:0: [sdb] Attached SCSI disk
- [ 4.588927] sd 2:0:0:0: [sda] Attached SCSI disk
- [ 4.596810] sdc: sdc1 sdc2 sdc3
- [ 4.597085] sd 4:0:0:0: [sdc] Attached SCSI disk
- [ 4.604195] sdd: sdd1 sdd2 sdd3
- [ 4.604469] sd 5:0:0:0: [sdd] Attached SCSI disk
- [ 4.637455] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) e0:d5:5e:af:2e:14
- [ 4.637456] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
- [ 4.637508] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
- [ 4.640642] e1000e 0000:00:1f.6 eno1: renamed from eth0
- [ 4.646954] usb 2-7: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
- [ 4.671957] usb 2-7: New USB device found, idVendor=1058, idProduct=25a3, bcdDevice=10.21
- [ 4.671958] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 4.671959] usb 2-7: Product: Elements 25A3
- [ 4.671960] usb 2-7: Manufacturer: Western Digital
- [ 4.671961] usb 2-7: SerialNumber: 4A454B354B47394E
- [ 4.687525] usb-storage 2-7:1.0: USB Mass Storage device detected
- [ 4.687750] scsi host6: usb-storage 2-7:1.0
- [ 4.687813] usbcore: registered new interface driver usb-storage
- [ 4.688048] usbcore: registered new interface driver uas
- [ 4.798859] usb 1-10: new full-speed USB device number 3 using xhci_hcd
- [ 4.898812] raid6: avx2x4 gen() 35744 MB/s
- [ 4.946812] raid6: avx2x4 xor() 22212 MB/s
- [ 4.955908] usb 1-10: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10
- [ 4.955909] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 4.994813] raid6: avx2x2 gen() 30970 MB/s
- [ 5.042814] raid6: avx2x2 xor() 19941 MB/s
- [ 5.086906] usb 2-8: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
- [ 5.090813] raid6: avx2x1 gen() 24519 MB/s
- [ 5.111728] usb 2-8: New USB device found, idVendor=1058, idProduct=25a3, bcdDevice=10.21
- [ 5.111729] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 5.111730] usb 2-8: Product: Elements 25A3
- [ 5.111731] usb 2-8: Manufacturer: Western Digital
- [ 5.111731] usb 2-8: SerialNumber: 4A4548574E50424D
- [ 5.113008] usb-storage 2-8:1.0: USB Mass Storage device detected
- [ 5.113175] scsi host7: usb-storage 2-8:1.0
- [ 5.138832] raid6: avx2x1 xor() 17390 MB/s
- [ 5.186816] raid6: sse2x4 gen() 14440 MB/s
- [ 5.234828] raid6: sse2x4 xor() 8665 MB/s
- [ 5.282816] raid6: sse2x2 gen() 12679 MB/s
- [ 5.330816] raid6: sse2x2 xor() 8440 MB/s
- [ 5.378818] raid6: sse2x1 gen() 11282 MB/s
- [ 5.426815] raid6: sse2x1 xor() 6350 MB/s
- [ 5.426816] raid6: using algorithm avx2x4 gen() 35744 MB/s
- [ 5.426816] raid6: .... xor() 22212 MB/s, rmw enabled
- [ 5.426817] raid6: using avx2x2 recovery algorithm
- [ 5.427651] xor: automatically using best checksumming function avx
- [ 5.433338] Btrfs loaded, crc32c=crc32c-intel
- [ 5.488144] spl: loading out-of-tree module taints kernel.
- [ 5.489628] znvpair: module license 'CDDL' taints kernel.
- [ 5.489628] Disabling lock debugging due to kernel taint
- [ 5.506827] usb 1-3.3: new full-speed USB device number 4 using xhci_hcd
- [ 5.613204] usb 1-3.3: New USB device found, idVendor=045e, idProduct=0800, bcdDevice= 9.44
- [ 5.613205] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.613206] usb 1-3.3: Product: Microsoft® Nano Transceiver v2.0
- [ 5.613207] usb 1-3.3: Manufacturer: Microsoft
- [ 5.621761] hidraw: raw HID events driver (C) Jiri Kosina
- [ 5.633597] usbcore: registered new interface driver usbhid
- [ 5.633598] usbhid: USB HID core driver
- [ 5.634025] usbcore: registered new interface driver usbkbd
- [ 5.634037] usbcore: registered new interface driver usbmouse
- [ 5.634702] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:045E:0800.0001/input/input3
- [ 5.691007] hid-generic 0003:045E:0800.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:14.0-3.3/input0
- [ 5.692569] input: Microsoft Microsoft® Nano Transceiver v2.0 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/0003:045E:0800.0002/input/input4
- [ 5.692760] input: Microsoft Microsoft® Nano Transceiver v2.0 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/0003:045E:0800.0002/input/input5
- [ 5.692933] hid-generic 0003:045E:0800.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:14.0-3.3/input1
- [ 5.693152] input: Microsoft Microsoft® Nano Transceiver v2.0 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.2/0003:045E:0800.0003/input/input6
- [ 5.707191] scsi 6:0:0:0: Direct-Access WD Elements 25A3 1021 PQ: 0 ANSI: 6
- [ 5.707429] sd 6:0:0:0: Attached scsi generic sg4 type 0
- [ 5.707728] sd 6:0:0:0: [sde] Very big device. Trying to use READ CAPACITY(16).
- [ 5.707871] sd 6:0:0:0: [sde] 19532808192 512-byte logical blocks: (10.0 TB/9.09 TiB)
- [ 5.707872] sd 6:0:0:0: [sde] 4096-byte physical blocks
- [ 5.708175] sd 6:0:0:0: [sde] Write Protect is off
- [ 5.708176] sd 6:0:0:0: [sde] Mode Sense: 47 00 10 08
- [ 5.708401] sd 6:0:0:0: [sde] No Caching mode page found
- [ 5.708482] sd 6:0:0:0: [sde] Assuming drive cache: write through
- [ 5.750939] input: Microsoft Microsoft® Nano Transceiver v2.0 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.2/0003:045E:0800.0003/input/input8
- [ 5.751186] hid-generic 0003:045E:0800.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:14.0-3.3/input2
- [ 6.123272] scsi 7:0:0:0: Direct-Access WD Elements 25A3 1021 PQ: 0 ANSI: 6
- [ 6.123524] sd 7:0:0:0: Attached scsi generic sg5 type 0
- [ 6.123750] sd 7:0:0:0: [sdf] Very big device. Trying to use READ CAPACITY(16).
- [ 6.123872] sd 7:0:0:0: [sdf] 19532808192 512-byte logical blocks: (10.0 TB/9.09 TiB)
- [ 6.123873] sd 7:0:0:0: [sdf] 4096-byte physical blocks
- [ 6.124139] sd 7:0:0:0: [sdf] Write Protect is off
- [ 6.124140] sd 7:0:0:0: [sdf] Mode Sense: 47 00 10 08
- [ 6.124458] sd 7:0:0:0: [sdf] No Caching mode page found
- [ 6.124540] sd 7:0:0:0: [sdf] Assuming drive cache: write through
- [ 6.160973] sde: sde1 sde2
- [ 6.161812] sd 6:0:0:0: [sde] Attached SCSI disk
- [ 6.395068] sdf: sdf1 sdf2
- [ 6.395921] sd 7:0:0:0: [sdf] Attached SCSI disk
- [ 7.412989] ZFS: Loaded module v0.8.3-pve1, ZFS pool version 5000, ZFS filesystem version 5
- [ 8.207555] zd0: p1
- [ 8.248723] zd16: p1 p9
- [ 8.310853] zd32: p1 p2 p3 p4
- [ 8.317487] zd64: p1 p2
- [ 8.321789] zd80: p1
- [ 8.326812] zd96: p1
- [ 8.332889] zd112: p1 p9
- [ 8.335943] zd128: p1
- [ 8.443188] zd144: p1 p2
- [ 8.446445] zd160: p1 p2
- [ 8.449586] zd176: p1 p2
- [ 8.452390] zd192: p1 p2
- [ 8.454699] zd208: p1 p2
- [ 8.456985] zd224: p1
- p1: <bsd: p5 >
- [ 8.458937] zd240: p1
- [ 8.463287] zd272: p1 p2 < p5 >
- [ 8.465427] zd288: p1 p2
- [ 8.470248] zd320: p1 p2
- [ 8.472481] zd336: p1
- [ 8.475341] zd352: p1 p2
- [ 8.478014] zd368: p1 p2
- [ 8.480714] zd384: p1 p2
- [ 8.482949] zd400: p1 p2
- [ 8.560727] systemd[1]: Inserted module 'autofs4'
- [ 8.569681] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
- [ 8.586958] systemd[1]: Detected architecture x86-64.
- [ 8.612327] systemd[1]: Set hostname to <pve>.
- [ 8.702072] systemd[1]: /lib/systemd/system/netdata.service:10: PIDFile= references path below legacy directory /var/run/, updating /var/run/netdata/netdata.pid → /run/netdata/netdata.pid; please update the unit file accordingly.
- [ 8.716756] systemd[1]: Reached target ceph target allowing to start/stop all ceph-fuse@.service instances at once.
- [ 8.717031] systemd[1]: Listening on Syslog Socket.
- [ 8.717216] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 8.717463] systemd[1]: Listening on LVM2 poll daemon socket.
- [ 8.717500] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 8.718200] systemd[1]: Created slice system-getty.slice.
- [ 8.741784] Loading iSCSI transport class v2.0-870.
- [ 8.743679] RPC: Registered named UNIX socket transport module.
- [ 8.743680] RPC: Registered udp transport module.
- [ 8.743680] RPC: Registered tcp transport module.
- [ 8.743681] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 8.744710] iscsi: registered transport (tcp)
- [ 8.760182] iscsi: registered transport (iser)
- [ 8.794522] systemd-journald[2110]: Received request to flush runtime journal from PID 1
- [ 8.844913] mei_me 0000:00:16.0: enabling device (0004 -> 0006)
- [ 8.879183] Bluetooth: Core ver 2.22
- [ 8.879193] NET: Registered protocol family 31
- [ 8.879194] Bluetooth: HCI device and connection manager initialized
- [ 8.879196] Bluetooth: HCI socket layer initialized
- [ 8.879197] Bluetooth: L2CAP socket layer initialized
- [ 8.879199] Bluetooth: SCO socket layer initialized
- [ 8.879200] input: PC Speaker as /devices/platform/pcspkr/input/input9
- [ 8.879790] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
- [ 8.879791] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
- [ 8.879791] RAPL PMU: hw unit of domain package 2^-14 Joules
- [ 8.879791] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
- [ 8.882150] usbcore: registered new interface driver btusb
- [ 8.884425] Bluetooth: hci0: Firmware revision 0.1 build 50 week 12 2019
- [ 8.885278] cryptd: max_cpu_qlen set to 1000
- [ 8.887344] AVX2 version of gcm_enc/dec engaged.
- [ 8.887345] AES CTR mode by8 optimization enabled
- [ 9.138482] intel_rapl_common: Found RAPL domain package
- [ 9.138483] intel_rapl_common: Found RAPL domain core
- [ 9.138484] intel_rapl_common: Found RAPL domain uncore
- [ 9.618157] audit: type=1400 audit(1589330242.095:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=2897 comm="apparmor_parser"
- [ 9.618792] audit: type=1400 audit(1589330242.095:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=2893 comm="apparmor_parser"
- [ 9.618794] audit: type=1400 audit(1589330242.099:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=2893 comm="apparmor_parser"
- [ 9.619690] audit: type=1400 audit(1589330242.099:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=2894 comm="apparmor_parser"
- [ 9.619692] audit: type=1400 audit(1589330242.099:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=2894 comm="apparmor_parser"
- [ 9.619693] audit: type=1400 audit(1589330242.099:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=2894 comm="apparmor_parser"
- [ 9.621779] audit: type=1400 audit(1589330242.099:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=2895 comm="apparmor_parser"
- [ 9.626308] audit: type=1400 audit(1589330242.103:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=2892 comm="apparmor_parser"
- [ 9.626310] audit: type=1400 audit(1589330242.103:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=2892 comm="apparmor_parser"
- [ 9.626311] audit: type=1400 audit(1589330242.103:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=2892 comm="apparmor_parser"
- [ 9.644058] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
- [ 9.647272] new mount options do not match the existing superblock, will be ignored
- [ 9.752358] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
- [ 9.821093] vmbr0: port 1(enp5s0) entered blocking state
- [ 9.821094] vmbr0: port 1(enp5s0) entered disabled state
- [ 9.821146] device enp5s0 entered promiscuous mode
- [ 9.880587] vmbr1: port 1(eno1) entered blocking state
- [ 9.880589] vmbr1: port 1(eno1) entered disabled state
- [ 9.880640] device eno1 entered promiscuous mode
- [ 10.246952] bpfilter: Loaded bpfilter_umh pid 3246
- [ 10.247162] Started bpfilter
- [ 12.811298] igb 0000:05:00.0 enp5s0: igb: enp5s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
- [ 12.919017] vmbr0: port 1(enp5s0) entered blocking state
- [ 12.919019] vmbr0: port 1(enp5s0) entered forwarding state
- [ 12.919226] IPv6: ADDRCONF(NETDEV_CHANGE): vmbr0: link becomes ready
- [ 14.888551] device tap200i0 entered promiscuous mode
- [ 14.895161] vmbr0: port 2(tap200i0) entered blocking state
- [ 14.895162] vmbr0: port 2(tap200i0) entered disabled state
- [ 14.895247] vmbr0: port 2(tap200i0) entered blocking state
- [ 14.895248] vmbr0: port 2(tap200i0) entered forwarding state
- [ 15.260215] device tap200i1 entered promiscuous mode
- [ 15.266696] vmbr1: port 2(tap200i1) entered blocking state
- [ 15.266697] vmbr1: port 2(tap200i1) entered disabled state
- [ 15.266775] vmbr1: port 2(tap200i1) entered blocking state
- [ 15.266804] vmbr1: port 2(tap200i1) entered forwarding state
- [ 15.266822] IPv6: ADDRCONF(NETDEV_CHANGE): vmbr1: link becomes ready
- [ 15.638856] device tap200i2 entered promiscuous mode
- [ 15.645351] vmbr2: port 1(tap200i2) entered blocking state
- [ 15.645352] vmbr2: port 1(tap200i2) entered disabled state
- [ 15.645431] vmbr2: port 1(tap200i2) entered blocking state
- [ 15.645432] vmbr2: port 1(tap200i2) entered forwarding state
- [ 16.011542] device tap200i3 entered promiscuous mode
- [ 16.018278] vmbr3: port 1(tap200i3) entered blocking state
- [ 16.018280] vmbr3: port 1(tap200i3) entered disabled state
- [ 16.018375] vmbr3: port 1(tap200i3) entered blocking state
- [ 16.018376] vmbr3: port 1(tap200i3) entered forwarding state
- [ 16.390235] device tap200i4 entered promiscuous mode
- [ 16.396881] vmbr4: port 1(tap200i4) entered blocking state
- [ 16.396882] vmbr4: port 1(tap200i4) entered disabled state
- [ 16.396962] vmbr4: port 1(tap200i4) entered blocking state
- [ 16.396963] vmbr4: port 1(tap200i4) entered forwarding state
- [ 16.760944] device tap200i5 entered promiscuous mode
- [ 16.767605] vmbr5: port 1(tap200i5) entered blocking state
- [ 16.767606] vmbr5: port 1(tap200i5) entered disabled state
- [ 16.767688] vmbr5: port 1(tap200i5) entered blocking state
- [ 16.767689] vmbr5: port 1(tap200i5) entered forwarding state
- [ 27.824222] device tap205i0 entered promiscuous mode
- [ 27.831237] vmbr0: port 3(tap205i0) entered blocking state
- [ 27.831238] vmbr0: port 3(tap205i0) entered disabled state
- [ 27.831318] vmbr0: port 3(tap205i0) entered blocking state
- [ 27.831319] vmbr0: port 3(tap205i0) entered forwarding state
- [ 28.206650] device tap205i1 entered promiscuous mode
- [ 28.213587] vmbr5: port 2(tap205i1) entered blocking state
- [ 28.213589] vmbr5: port 2(tap205i1) entered disabled state
- [ 28.213648] vmbr5: port 2(tap205i1) entered blocking state
- [ 28.213649] vmbr5: port 2(tap205i1) entered forwarding state
- [ 31.991127] kauditd_printk_skb: 6 callbacks suppressed
- [ 31.991129] audit: type=1400 audit(1589330264.471:18): apparmor="STATUS" operation="profile_load" profile="/usr/bin/lxc-start" name="lxc-350_</var/lib/lxc>" pid=7005 comm="apparmor_parser"
- [ 32.374914] vmbr0: port 4(veth350i0) entered blocking state
- [ 32.374915] vmbr0: port 4(veth350i0) entered disabled state
- [ 32.374970] device veth350i0 entered promiscuous mode
- [ 32.401321] eth0: renamed from vethCsCFVd
- [ 32.522346] audit: type=1400 audit(1589330264.999:19): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="/usr/bin/lxc-start" name="/proc/sys/kernel/random/boot_id" pid=7296 comm="lxc-start" srcname="/dev/.lxc-boot-id" flags="rw, bind"
- [ 32.873097] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 32.873119] vmbr0: port 4(veth350i0) entered blocking state
- [ 32.873120] vmbr0: port 4(veth350i0) entered forwarding state
- [ 32.919785] device tap400i0 entered promiscuous mode
- [ 32.928230] vmbr1: port 3(tap400i0) entered blocking state
- [ 32.928231] vmbr1: port 3(tap400i0) entered disabled state
- [ 32.928305] vmbr1: port 3(tap400i0) entered blocking state
- [ 32.928306] vmbr1: port 3(tap400i0) entered forwarding state
- [ 37.018187] audit: type=1400 audit(1589330269.495:20): apparmor="STATUS" operation="profile_load" profile="/usr/bin/lxc-start" name="lxc-450_</var/lib/lxc>" pid=12002 comm="apparmor_parser"
- [ 37.395812] vmbr0: port 5(veth450i0) entered blocking state
- [ 37.395814] vmbr0: port 5(veth450i0) entered disabled state
- [ 37.395872] device veth450i0 entered promiscuous mode
- [ 37.419333] eth0: renamed from veth2J9HVf
- [ 37.539407] audit: type=1400 audit(1589330270.019:21): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="/usr/bin/lxc-start" name="/proc/sys/kernel/random/boot_id" pid=12059 comm="lxc-start" srcname="/dev/.lxc-boot-id" flags="rw, bind"
- [ 37.917621] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 37.917645] vmbr0: port 5(veth450i0) entered blocking state
- [ 37.917646] vmbr0: port 5(veth450i0) entered forwarding state
- [ 37.932449] device tap500i0 entered promiscuous mode
- [ 37.940362] vmbr4: port 2(tap500i0) entered blocking state
- [ 37.940363] vmbr4: port 2(tap500i0) entered disabled state
- [ 37.940425] vmbr4: port 2(tap500i0) entered blocking state
- [ 37.940426] vmbr4: port 2(tap500i0) entered forwarding state
- [ 41.977354] device tap525i0 entered promiscuous mode
- [ 41.988331] vmbr3: port 2(tap525i0) entered blocking state
- [ 41.988332] vmbr3: port 2(tap525i0) entered disabled state
- [ 41.988403] vmbr3: port 2(tap525i0) entered blocking state
- [ 41.988404] vmbr3: port 2(tap525i0) entered forwarding state
- [ 46.041975] device tap550i0 entered promiscuous mode
- [ 46.056790] vmbr2: port 2(tap550i0) entered blocking state
- [ 46.056791] vmbr2: port 2(tap550i0) entered disabled state
- [ 46.056863] vmbr2: port 2(tap550i0) entered blocking state
- [ 46.056864] vmbr2: port 2(tap550i0) entered forwarding state
- [ 50.042250] device tap100i0 entered promiscuous mode
- [ 50.050935] vmbr0: port 6(tap100i0) entered blocking state
- [ 50.050936] vmbr0: port 6(tap100i0) entered disabled state
- [ 50.051007] vmbr0: port 6(tap100i0) entered blocking state
- [ 50.051008] vmbr0: port 6(tap100i0) entered forwarding state
- [ 50.311035] vmbr0: port 6(tap100i0) entered disabled state
- [ 52.240996] device tap250i0 entered promiscuous mode
- [ 52.254730] vmbr1: port 4(tap250i0) entered blocking state
- [ 52.254731] vmbr1: port 4(tap250i0) entered disabled state
- [ 52.254946] vmbr1: port 4(tap250i0) entered blocking state
- [ 52.254947] vmbr1: port 4(tap250i0) entered forwarding state
- [ 52.377577] vfio-pci 0000:06:00.0: enabling device (0000 -> 0002)
- [ 52.483131] vfio-pci 0000:06:00.0: vfio_ecap_init: hiding ecap 0x1e@0x154
- [ 98.818624] device tap275i0 entered promiscuous mode
- [ 98.825668] vmbr0: port 6(tap275i0) entered blocking state
- [ 98.825670] vmbr0: port 6(tap275i0) entered disabled state
- [ 98.825734] vmbr0: port 6(tap275i0) entered blocking state
- [ 98.825735] vmbr0: port 6(tap275i0) entered forwarding state
- [ 104.425384] usb 2-7: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd
- [ 104.729422] usb 2-8: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
- [30556.901253] perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
Add Comment
Please, Sign In to add comment