zombah

jb p2p supp error

Sep 18th, 2012
155
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.54 KB | None | 0 0
  1. D/CommandListener( 102): Setting iface cfg
  2. D/CommandListener( 102): Trying to bring down wlan0
  3. E/WifiHW ( 278): Unable to open connection to supplicant on "wlan0": No such file or directory
  4. D/wpa_supplicant( 841): wpa_supplicant v2.0-devel-4.1.1
  5. D/wpa_supplicant( 841): random: Trying to read entropy from /dev/random
  6. D/wpa_supplicant( 841): Initializing interface 'wlan0' conf '/data/misc/wifi/wpa_supplicant.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
  7. D/wpa_supplicant( 841): Configuration file '/data/misc/wifi/wpa_supplicant.conf' -> '/data/misc/wifi/wpa_supplicant.conf'
  8. D/wpa_supplicant( 841): Reading configuration file '/data/misc/wifi/wpa_supplicant.conf'
  9. D/wpa_supplicant( 841): update_config=1
  10. D/wpa_supplicant( 841): ctrl_interface='wlan0'
  11. D/wpa_supplicant( 841): eapol_version=1
  12. D/wpa_supplicant( 841): ap_scan=1
  13. D/wpa_supplicant( 841): fast_reauth=1
  14. D/wpa_supplicant( 841): nl80211: interface wlan0 in phy phy0
  15. I/wpa_supplicant( 841): rfkill: Cannot open RFKILL control device
  16. D/wpa_supplicant( 841): nl80211: RFKILL status not available
  17. D/wpa_supplicant( 841): nl80211: Set mode ifindex 6 iftype 2 (STATION)
  18. D/wpa_supplicant( 841): nl80211: Subscribe to mgmt frames with non-AP handle 0x40bc30c0
  19. D/wpa_supplicant( 841): nl80211: Register frame type=0xd0 nl_handle=0x40bc30c0
  20. D/wpa_supplicant( 841): nl80211: Register frame type=0xd0 nl_handle=0x40bc30c0
  21. D/wpa_supplicant( 841): nl80211: Register frame type=0xd0 nl_handle=0x40bc30c0
  22. D/wpa_supplicant( 841): nl80211: Register frame type=0xd0 nl_handle=0x40bc30c0
  23. D/wpa_supplicant( 841): nl80211: Register frame type=0xd0 nl_handle=0x40bc30c0
  24. D/wpa_supplicant( 841): nl80211: Register frame type=0xd0 nl_handle=0x40bc30c0
  25. D/wpa_supplicant( 841): nl80211: Register frame type=0xd0 nl_handle=0x40bc30c0
  26. D/wpa_supplicant( 841): nl80211: Register frame type=0xd0 nl_handle=0x40bc30c0
  27. D/wpa_supplicant( 841): netlink: Operstate: linkmode=1, operstate=5
  28. D/wpa_supplicant( 841): nl80211: Using driver-based off-channel TX
  29. D/wpa_supplicant( 841): nl80211: driver param='(null)'
  30. D/wpa_supplicant( 841): nl80211: Regulatory information - country=00
  31. D/wpa_supplicant( 841): nl80211: 2402-2472 @ 40 MHz
  32. D/wpa_supplicant( 841): nl80211: 2457-2482 @ 20 MHz
  33. D/wpa_supplicant( 841): nl80211: 2474-2494 @ 20 MHz
  34. D/wpa_supplicant( 841): nl80211: 5170-5250 @ 40 MHz
  35. D/wpa_supplicant( 841): nl80211: 5735-5835 @ 40 MHz
  36. D/wpa_supplicant( 841): nl80211: Added 802.11b mode based on 802.11g information
  37. D/wpa_supplicant( 841): wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x0 key_idx=0 set_tx=0 seq_len=0 key_len=0
  38. D/wpa_supplicant( 841): wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x0 key_idx=1 set_tx=0 seq_len=0 key_len=0
  39. D/wpa_supplicant( 841): wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x0 key_idx=2 set_tx=0 seq_len=0 key_len=0
  40. D/wpa_supplicant( 841): wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x0 key_idx=3 set_tx=0 seq_len=0 key_len=0
  41. D/wpa_supplicant( 841): nl80211: Flush PMKIDs
  42. D/wpa_supplicant( 841): Calling set grouple idle_timeout from notif_disconnected
  43. D/wpa_supplicant( 841): WPS: Set UUID for interface wlan0
  44. D/wpa_supplicant( 841): EAPOL: SUPP_PAE entering state DISCONNECTED
  45. D/wpa_supplicant( 841): EAPOL: Supplicant port status: Unauthorized
  46. D/wpa_supplicant( 841): EAPOL: KEY_RX entering state NO_KEY_RECEIVE
  47. D/wpa_supplicant( 841): EAPOL: SUPP_BE entering state INITIALIZE
  48. D/wpa_supplicant( 841): EAP: EAP entering state DISABLED
  49. D/wpa_supplicant( 841): EAPOL: Supplicant port status: Unauthorized
  50. D/wpa_supplicant( 841): EAPOL: Supplicant port status: Unauthorized
  51. E/wpa_supplicant( 841): Failed to initialize control interface 'wlan0'.
  52. E/wpa_supplicant( 841): You may have another wpa_supplicant process already running or the file was
  53. E/wpa_supplicant( 841): left by an unclean termination of wpa_supplicant in which case you will need
  54. E/wpa_supplicant( 841): to manually remove this file before starting wpa_supplicant again.
  55. D/wpa_supplicant( 841): Failed to add interface wlan0
  56. D/wpa_supplicant( 841): wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
  57. D/wpa_supplicant( 841): netlink: Operstate: linkmode=-1, operstate=5
  58. D/wpa_supplicant( 841): Calling set grouple idle_timeout from notif_disconnected
  59. D/wpa_supplicant( 841): EAPOL: External notification - portEnabled=0
  60. D/wpa_supplicant( 841): EAPOL: Supplicant port status: Unauthorized
  61. D/wpa_supplicant( 841): EAPOL: External notification - portValid=0
  62. D/wpa_supplicant( 841): EAPOL: Supplicant port status: Unauthorized
  63. D/wpa_supplicant( 841): netlink: Operstate: linkmode=0, operstate=6
  64. D/wpa_supplicant( 841): nl80211: Set mode ifindex 6 iftype 2 (STATION)
  65. D/wpa_supplicant( 841): nl80211: Unsubscribe mgmt frames handle 0x40bc30c0 (mode change)
  66. D/wpa_supplicant( 841): nl80211: Subscribe to mgmt frames with non-AP handle 0x40bc2dc0
  67. D/wpa_supplicant( 841): nl80211: Register frame type=0xd0 nl_handle=0x40bc2dc0
  68. D/wpa_supplicant( 841): nl80211: Register frame type=0xd0 nl_handle=0x40bc2dc0
  69. D/wpa_supplicant( 841): nl80211: Register frame type=0xd0 nl_handle=0x40bc2dc0
  70. D/wpa_supplicant( 841): nl80211: Register frame type=0xd0 nl_handle=0x40bc2dc0
  71. D/wpa_supplicant( 841): nl80211: Register frame type=0xd0 nl_handle=0x40bc2dc0
  72. D/wpa_supplicant( 841): nl80211: Register frame type=0xd0 nl_handle=0x40bc2dc0
  73. D/wpa_supplicant( 841): nl80211: Register frame type=0xd0 nl_handle=0x40bc2dc0
  74. D/wpa_supplicant( 841): nl80211: Register frame type=0xd0 nl_handle=0x40bc2dc0
  75. D/wpa_supplicant( 841): nl80211: Unsubscribe mgmt frames handle 0x40bc2dc0 (deinit)
Advertisement
Add Comment
Please, Sign In to add comment