daily pastebin goal
73%
SHARE
TWEET

bananapi_m2_regulator_fixed

embed3d Feb 10th, 2018 322 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. U-Boot SPL 2018.01-dirty (Feb 09 2018 - 11:54:32)
  2. DRAM: 1024 MiB
  3. Trying to boot from MMC1
  4.  
  5.  
  6. U-Boot 2018.01-dirty (Feb 09 2018 - 11:54:32 +0100) Allwinner Technology
  7.  
  8. CPU:   Allwinner A31s (SUN6I)
  9. Model: Sinovoip BPI-M2
  10. DRAM:  1 GiB
  11. MMC:   SUNXI SD/MMC: 0
  12. *** Warning - bad CRC, using default environment
  13.  
  14. In:    serial
  15. Out:   serial
  16. Err:   serial
  17. Net:   eth0: ethernet@01c30000
  18. starting USB...
  19. USB0:   USB EHCI 1.00
  20. USB1:   USB OHCI 1.0
  21. scanning bus 0 for devices... 2 USB Device(s) found
  22.        scanning usb for storage devices... 0 Storage Device(s) found
  23. Hit any key to stop autoboot:  0
  24. switch to partitions #0, OK
  25. mmc0 is current device
  26. Scanning mmc 0:1...
  27. Found U-Boot script /boot.scr
  28. reading /boot.scr
  29. 339 bytes read in 21 ms (15.6 KiB/s)
  30. ## Executing script at 43100000
  31. reading sun6i-a31s-sinovoip-bpi-m2.dtb
  32. 25697 bytes read in 38 ms (660.2 KiB/s)
  33. reading uImage
  34. 3804264 bytes read in 241 ms (15.1 MiB/s)
  35. ## Booting kernel from Legacy Image at 42000000 ...
  36.    Image Name:   Linux-4.15.0-00003-g1bbe5edde691
  37.    Image Type:   ARM Linux Kernel Image (uncompressed)
  38.    Data Size:    3804200 Bytes = 3.6 MiB
  39.    Load Address: 40008000
  40.    Entry Point:  40008000
  41.    Verifying Checksum ... OK
  42. ## Flattened Device Tree blob at 43000000
  43.    Booting using the fdt blob at 0x43000000
  44.    Loading Kernel Image ... OK
  45.    Loading Device Tree to 49ff6000, end 49fff460 ... OK
  46.  
  47. Starting kernel ...
  48.  
  49. [    0.000000] Booting Linux on physical CPU 0x0
  50. [    0.000000] Linux version 4.15.0-00003-g1bbe5edde691 (philipp@debian-laptop) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 SMP Sat Feb 10 22:50:47 CET 2018
  51. [    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
  52. [    0.000000] CPU: div instructions available: patching division code
  53. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  54. [    0.000000] OF: fdt: Machine model: Sinovoip BPI-M2
  55. [    0.000000] Memory policy: Data cache writealloc
  56. [    0.000000] cma: Reserved 16 MiB at 0x7f000000
  57. [    0.000000] psci: probing for conduit method from DT.
  58. [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
  59. [    0.000000] percpu: Embedded 16 pages/cpu @(ptrval) s33548 r8192 d23796 u65536
  60. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 260608
  61. [    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait panic=10
  62. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  63. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  64. [    0.000000] Memory: 1012944K/1048576K available (6144K kernel code, 419K rwdata, 1452K rodata, 1024K init, 249K bss, 19248K reserved, 16384K cma-reserved, 245760K hi)
  65. [    0.000000] Virtual kernel memory layout:
  66. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  67. [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  68. [    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
  69. [    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
  70. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  71. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  72. [    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (7136 kB)
  73. [    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
  74. [    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 420 kB)
  75. [    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 250 kB)
  76. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  77. [    0.000000] Hierarchical RCU implementation.
  78. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  79. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  80. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  81. [    0.000000] GIC: Using split EOI/Deactivate mode
  82. [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  83. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  84. [    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  85. [    0.000017] Switching to timer-based delay loop, resolution 41ns
  86. [    0.000203] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  87. [    0.000336] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
  88. [    0.000611] Console: colour dummy device 80x30
  89. [    0.000642] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  90. [    0.000656] pid_max: default: 32768 minimum: 301
  91. [    0.000760] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  92. [    0.000777] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  93. [    0.001268] CPU: Testing write buffer coherency: ok
  94. [    0.001528] /cpus/cpu@0 missing clock-frequency property
  95. [    0.001543] /cpus/cpu@1 missing clock-frequency property
  96. [    0.001555] /cpus/cpu@2 missing clock-frequency property
  97. [    0.001567] /cpus/cpu@3 missing clock-frequency property
  98. [    0.001577] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  99. [    0.001858] Setting up static identity map for 0x40100000 - 0x40100060
  100. [    0.001948] Hierarchical SRCU implementation.
  101. [    0.002387] smp: Bringing up secondary CPUs ...
  102. [    0.012890] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  103. [    0.023430] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  104. [    0.033944] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  105. [    0.034013] smp: Brought up 1 node, 4 CPUs
  106. [    0.034030] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  107. [    0.034036] CPU: All CPU(s) started in HYP mode.
  108. [    0.034040] CPU: Virtualization extensions available.
  109. [    0.034708] devtmpfs: initialized
  110. [    0.039644] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
  111. [    0.039809] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  112. [    0.039826] futex hash table entries: 1024 (order: 4, 65536 bytes)
  113. [    0.040440] pinctrl core: initialized pinctrl subsystem
  114. [    0.041039] random: get_random_u32 called from bucket_table_alloc+0xf4/0x244 with crng_init=0
  115. [    0.041128] NET: Registered protocol family 16
  116. [    0.042034] DMA: preallocated 256 KiB pool for atomic coherent allocations
  117. [    0.042771] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  118. [    0.042780] hw-breakpoint: maximum watchpoint size is 8 bytes.
  119. [    0.053462] SCSI subsystem initialized
  120. [    0.053783] usbcore: registered new interface driver usbfs
  121. [    0.053857] usbcore: registered new interface driver hub
  122. [    0.053903] usbcore: registered new device driver usb
  123. [    0.054060] pps_core: LinuxPPS API ver. 1 registered
  124. [    0.054067] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  125. [    0.054091] PTP clock support registered
  126. [    0.054271] Advanced Linux Sound Architecture Driver Initialized.
  127. [    0.054540] random: fast init done
  128. [    0.054863] clocksource: Switched to clocksource arch_sys_counter
  129. [    0.060805] NET: Registered protocol family 2
  130. [    0.061210] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  131. [    0.061289] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  132. [    0.061404] TCP: Hash tables configured (established 8192 bind 8192)
  133. [    0.061499] UDP hash table entries: 512 (order: 2, 16384 bytes)
  134. [    0.061546] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  135. [    0.061703] NET: Registered protocol family 1
  136. [    0.061998] RPC: Registered named UNIX socket transport module.
  137. [    0.062008] RPC: Registered udp transport module.
  138. [    0.062013] RPC: Registered tcp transport module.
  139. [    0.062018] RPC: Registered tcp NFSv4.1 backchannel transport module.
  140. [    0.062420] hw perfevents: no interrupt-affinity property for /pmu, guessing.
  141. [    0.062673] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  142. [    0.063705] workingset: timestamp_bits=30 max_order=18 bucket_order=0
  143. [    0.068223] NFS: Registering the id_resolver key type
  144. [    0.068253] Key type id_resolver registered
  145. [    0.068259] Key type id_legacy registered
  146. [    0.068916] bounce: pool size: 64 pages
  147. [    0.068977] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  148. [    0.068988] io scheduler noop registered
  149. [    0.068994] io scheduler deadline registered
  150. [    0.069161] io scheduler cfq registered (default)
  151. [    0.069170] io scheduler mq-deadline registered
  152. [    0.069176] io scheduler kyber registered
  153. [    0.074165] sun6i-a31-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  154. [    0.074372] sun6i-a31-r-pinctrl 1f02c00.pinctrl: Reset controller missing
  155. [    0.116248] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  156. [    0.118130] console [ttyS0] disabled
  157. [    0.138267] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 44, base_baud = 1500000) is a U6_16550A
  158. [    0.796328] console [ttyS0] enabled
  159. [    0.803489] libphy: Fixed MDIO Bus: probed
  160. [    0.807614] CAN device driver interface
  161. [    0.811906] sun7i-dwmac 1c30000.ethernet: PTP uses main clock
  162. [    0.818068] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  163. [    0.824588] ehci-platform: EHCI generic platform driver
  164. [    0.829949] ehci-platform 1c1a000.usb: EHCI Host Controller
  165. [    0.835551] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
  166. [    0.843515] ehci-platform 1c1a000.usb: irq 33, io mem 0x01c1a000
  167. [    0.874880] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
  168. [    0.881569] hub 1-0:1.0: USB hub found
  169. [    0.885359] hub 1-0:1.0: 1 port detected
  170. [    0.889635] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  171. [    0.895829] ohci-platform: OHCI generic platform driver
  172. [    0.901191] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
  173. [    0.907825] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
  174. [    0.915669] ohci-platform 1c1a400.usb: irq 34, io mem 0x01c1a400
  175. [    0.989350] hub 2-0:1.0: USB hub found
  176. [    0.993122] hub 2-0:1.0: 1 port detected
  177. [    0.998335] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
  178. [    1.005134] sun6i-rtc 1f00000.rtc: RTC enabled
  179. [    1.009726] i2c /dev entries driver
  180. [    1.013425] i2c-sunxi-p2wi 1f03400.i2c: could not find pctldev for node /soc@1c00000/pinctrl@1f02c00/p2wi, deferring probe
  181. [    1.024540] IR NEC protocol handler initialized
  182. [    1.029078] IR RC5(x/sz) protocol handler initialized
  183. [    1.034121] IR RC6 protocol handler initialized
  184. [    1.038655] IR JVC protocol handler initialized
  185. [    1.043178] IR Sony protocol handler initialized
  186. [    1.047794] IR SANYO protocol handler initialized
  187. [    1.052490] IR Sharp protocol handler initialized
  188. [    1.057195] IR MCE Keyboard/mouse protocol handler initialized
  189. [    1.063018] IR XMP protocol handler initialized
  190. [    1.067635] sunxi-ir 1f02000.ir: could not find pctldev for node /soc@1c00000/pinctrl@1f02c00/ir@0, deferring probe
  191. [    1.078572] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  192. [    1.086767] pwrseq_simple mmc2_pwrseq: could not find pctldev for node /soc@1c00000/pinctrl@1f02c00/mmc2_pwrseq_pin@0, deferring probe
  193. [    1.100142] sun4i-ss 1c15000.crypto-engine: Die ID 5
  194. [    1.106238] usbcore: registered new interface driver usbhid
  195. [    1.111802] usbhid: USB HID core driver
  196. [    1.116677] NET: Registered protocol family 17
  197. [    1.121127] can: controller area network core (rev 20170425 abi 9)
  198. [    1.127372] NET: Registered protocol family 29
  199. [    1.131811] can: raw protocol (rev 20170425)
  200. [    1.136088] can: broadcast manager protocol (rev 20170425 t)
  201. [    1.141744] can: netlink gateway (rev 20170425) max_hops=1
  202. [    1.147411] Key type dns_resolver registered
  203. [    1.151756] Registering SWP/SWPB emulation handler
  204. [    1.164187] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
  205. [    1.171843] sun7i-dwmac 1c30000.ethernet: PTP uses main clock
  206. [    1.178467] axp20x-i2c 0-0068: AXP20x variant AXP221 found
  207. [    1.208703] input: axp20x-pek as /devices/platform/soc@1c00000/1f03400.i2c/i2c-0/0-0068/axp221-pek/input/input0
  208. [    1.219646] dcdc1: supplied by regulator-dummy
  209. [    1.225358] dcdc2: supplied by regulator-dummy
  210. [    1.230500] dcdc3: supplied by regulator-dummy
  211. [    1.235649] dcdc4: supplied by regulator-dummy
  212. [    1.240789] dcdc5: supplied by regulator-dummy
  213. [    1.245924] dc1sw: supplied by vdd-3v0
  214. [    1.250345] dc5ldo: supplied by vcc-dram
  215. [    1.254983] aldo1: supplied by regulator-dummy
  216. [    1.259461] usb 1-1: new high-speed USB device number 2 using ehci-platform
  217. [    1.266627] aldo2: supplied by regulator-dummy
  218. [    1.271630] vcc-gmac: Bringing 1800000uV into 2500000-2500000uV
  219. [    1.278299] aldo3: supplied by regulator-dummy
  220. [    1.283991] eldo1: supplied by vdd-3v0
  221. [    1.288322] vdd-csi: Bringing 700000uV into 1800000-1800000uV
  222. [    1.294790] eldo2: supplied by vdd-3v0
  223. [    1.299267] eldo3: supplied by vdd-3v0
  224. [    1.303708] dldo1: supplied by regulator-dummy
  225. [    1.308865] dldo2: supplied by regulator-dummy
  226. [    1.313868] avdd-csi: Bringing 700000uV into 2800000-2800000uV
  227. [    1.320423] dldo3: supplied by regulator-dummy
  228. [    1.325442] vcc-pb: Bringing 700000uV into 3300000-3300000uV
  229. [    1.332381] dldo4: supplied by regulator-dummy
  230. [    1.337561] rtc_ldo: supplied by regulator-dummy
  231. [    1.342302] ldo_io0: supplied by regulator-dummy
  232. [    1.348172] ldo_io1: supplied by regulator-dummy
  233. [    1.353911] vcc-pm-cpus: Bringing 3800000uV into 1800000-1800000uV
  234. [    1.361932] drivevbus: supplied by regulator-dummy
  235. [    1.369527] axp20x-i2c 0-0068: AXP20X driver loaded
  236. [    1.375104] Registered IR keymap rc-empty
  237. [    1.379176] rc rc0: sunxi-ir as /devices/platform/soc@1c00000/1f02000.ir/rc/rc0
  238. [    1.386601] input: sunxi-ir as /devices/platform/soc@1c00000/1f02000.ir/rc/rc0/input1
  239. [    1.394739] input: MCE IR Keyboard/Mouse (sunxi-ir) as /devices/virtual/input/input2
  240. [    1.402650] sunxi-ir 1f02000.ir: initialized sunXi IR driver
  241. [    1.410028] sunxi-mmc 1c0f000.mmc: Got CD GPIO
  242. [    1.465027] sunxi-mmc 1c0f000.mmc: base:0x(ptrval) irq:31
  243. [    1.471178] sunxi-mmc 1c11000.mmc: allocated mmc-pwrseq
  244. [    1.477154] hub 1-1:1.0: USB hub found
  245. [    1.481970] hub 1-1:1.0: 4 ports detected
  246. [    1.532410] mmc0: host does not support reading read-only switch, assuming write-enable
  247. [    1.540437] sunxi-mmc 1c11000.mmc: base:0x(ptrval) irq:32
  248. [    1.546260] sun7i-dwmac 1c30000.ethernet: PTP uses main clock
  249. [    1.552100] sun7i-dwmac 1c30000.ethernet: Ring mode enabled
  250. [    1.557689] sun7i-dwmac 1c30000.ethernet: DMA HW capability register supported
  251. [    1.564913] sun7i-dwmac 1c30000.ethernet: Normal descriptors
  252. [    1.570777] mmc0: new high speed SD card at address 1234
  253. [    1.576380] mmcblk0: mmc0:1234 SA02G 1.85 GiB
  254. [    1.582858]  mmcblk0: p1 p2
  255. [    1.597787] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  256. [    1.604751] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  257. [    1.611727] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  258. [    1.619879] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  259. [    1.645549] mmc1: new high speed SDIO card at address 0001
  260. [    1.657891] libphy: stmmac: probed
  261. [    1.661296] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  262. [    1.670777] mdio_bus stmmac-0:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
  263. [    1.680686] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13)
  264. [    1.689012] vdd-gpu: disabling
  265. [    1.692659] dc1sw: disabling
  266. [    1.696148] vcc-wifi: disabling
  267. [    1.699878] ALSA device list:
  268. [    1.702841]   No soundcards found.
  269. [    1.708135] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  270. [    1.717414] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  271. [    1.998902] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  272. [    2.007036] VFS: Mounted root (ext4 filesystem) on device 179:2.
  273. [    2.017156] devtmpfs: mounted
  274. [    2.021200] Freeing unused kernel memory: 1024K
  275. [    2.224589] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
  276. [    2.238139] systemd[1]: Detected architecture 'arm'.
  277.  
  278. Welcome to Debian GNU/Linux 8 (jessie)!
  279.  
  280. [    2.306043] systemd[1]: Failed to insert module 'autofs4'
  281. [    2.311546] systemd[1]: Failed to insert module 'ipv6'
  282. [    2.318466] systemd[1]: Set hostname to <bpi>.
  283. [    2.624272] systemd[1]: Expecting device dev-ttyS0.device...
  284.          Expecting device dev-ttyS0.device...
  285. [    2.654962] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  286. [    2.662791] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  287. [    2.670462] systemd[1]: Starting Remote File Systems (Pre).
  288. [  OK  ] Reached target Remote File Systems (Pre).
  289. [    2.704932] systemd[1]: Reached target Remote File Systems (Pre).
  290. [  OK  ] Reached target Paths.
  291. [  OK  ] Reached target Encrypted Volumes.
  292. [  OK  ] Reached target Swap.
  293. [  OK  ] Created slice Root Slice.
  294. [  OK  ] Created slice User and Session Slice.
  295. [  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
  296. [  OK  ] Listening on Delayed Shutdown Socket.
  297. [  OK  ] Listening on Journal Socket (/dev/log).
  298. [  OK  ] Listening on udev Control Socket.
  299. [  OK  ] Listening on udev Kernel Socket.
  300. [  OK  ] Listening on Journal Socket.
  301. [  OK  ] Created slice System Slice.
  302. [  OK  ] Created slice system-getty.slice.
  303. [  OK  ] Created slice system-serial\x2dgetty.slice.
  304.          Starting Increase datagram queue length...
  305.          Starting udev Coldplug all Devices...
  306.          Mounting Debug File System...
  307.          Starting Create Static Device Nodes in /dev...
  308.          Starting Load Kernel Modules...
  309. [  OK  ] Reached target Slices.
  310.          Starting Remount Root and Kernel File Systems...
  311. [  OK  ] Mounted Debug File System.
  312. [  OK  ] Started Increase datagram queue length.
  313. [  OK  ] Started Create Static Device Nodes in /dev.
  314. [  OK  ] Started Load Kernel Modules.
  315. [  OK  ] Started Remount Root and Kernel File Systems.
  316. [  OK  ] Started udev Coldplug all Devices.
  317.          Starting Load/Save Random Seed...
  318.          Starting Apply Kernel Variables...
  319.          Starting udev Kernel Device Manager...
  320. [  OK  ] Reached target Local File Systems (Pre).
  321. [    3.731395] systemd-udevd[112]: starting version 215
  322. [  OK  ] Reached target Local File Systems.
  323.          Starting Create Volatile Files and Directories...
  324. [  OK  ] Reached target Remote File Systems.
  325. [  OK  ] Listening on Syslog Socket.
  326.          Starting Journal Service...
  327. [  OK  ] Started Journal Service.
  328.          Starting Trigger Flushing of Journal to Persistent Storage...
  329. [  OK  ] Started udev Kernel Device Manager.
  330. [  OK  ] Started Load/Save Random Seed.
  331. [  OK  ] Started Apply Kernel Variables.
  332. [  OK  ] Started Create Volatile Files and Directories.
  333. [  OK  ] Found device /dev/ttyS0.
  334. [    4.208076] systemd-journald[132]: Received request to flush runtime journal from PID 1
  335. [  OK  ] Started Trigger Flushing of Journal to Persistent Storage.
  336. [  OK  ] Created slice system-ifup.slice.
  337.          Starting Update UTMP about System Boot/Shutdown...
  338.          Starting LSB: Raise network interfaces....
  339.          Starting Copy rules generated while the root was ro...
  340. [  OK  ] Started Copy rules generated while the root was ro.
  341. [  OK  ] Started Update UTMP about System Boot/Shutdown.
  342. [    5.083948] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  343. [    5.095612] sun7i-dwmac 1c30000.ethernet eth0: RX IPC Checksum Offload disabled
  344. [    5.102921] sun7i-dwmac 1c30000.ethernet eth0: No MAC Management Counters available
  345. [    5.110608] sun7i-dwmac 1c30000.ethernet eth0: PTP not supported by HW
  346. [    6.155672] sun7i-dwmac 1c30000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  347. [  OK  ] Started LSB: Raise network interfaces..
  348.          Starting ifup for eth0...
  349. [  OK  ] Started ifup for eth0.
  350. [  OK  ] Reached target Network.
  351. [  OK  ] Reached target System Initialization.
  352. [  OK  ] Listening on D-Bus System Message Bus Socket.
  353. [  OK  ] Reached target Sockets.
  354. [  OK  ] Reached target Timers.
  355. [  OK  ] Reached target Basic System.
  356.          Starting Regular background program processing daemon...
  357. [  OK  ] Started Regular background program processing daemon.
  358.          Starting OpenBSD Secure Shell server...
  359.          Starting /etc/rc.local Compatibility...
  360.          Starting Login Service...
  361.          Starting LSB: Starts LIRC daemon....
  362.          Starting D-Bus System Message Bus...
  363. [  OK  ] Started D-Bus System Message Bus.
  364.          Starting System Logging Service...
  365.          Starting Permit User Sessions...
  366. [  OK  ] Started OpenBSD Secure Shell server.
  367. [  OK  ] Started /etc/rc.local Compatibility.
  368. [  OK  ] Started LSB: Starts LIRC daemon..
  369. [  OK  ] Started Permit User Sessions.
  370. [  OK  ] Started System Logging Service.
  371.          Starting SLiM Simple Login Manager...
  372.          Starting Getty on tty1...
  373. [  OK  ] Started Getty on tty1.
  374.          Starting Serial Getty on ttyS0...
  375. [  OK  ] Started Serial Getty on ttyS0.
  376. [  OK  ] Reached target Login Prompts.
  377. [  OK  ] Started SLiM Simple Login Manager.
  378. [  OK  ] Started Login Service.
  379. [  OK  ] Reached target Multi-User System.
  380. [  OK  ] Reached target Graphical Interface.
  381.          Starting Update UTMP about System Runlevel Changes...
  382. [  OK  ] Started Update UTMP about System Runlevel Changes.
  383.  
  384. Debian GNU/Linux 8 bpi ttyS0
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top