API tools faq
paste
Advertisement
Guest User

Configuration.h

a guest
Oct 13th, 2020
471
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 89.92 KB | None | 0 0
raw download clone embed print report
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <https://www.gnu.org/licenses/>.
  20. *
  21. */
  22. #pragma once
  23.  
  24. /**
  25. * Configuration.h
  26. *
  27. * Basic settings such as:
  28. *
  29. * - Type of electronics
  30. * - Type of temperature sensor
  31. * - Printer geometry
  32. * - Endstop configuration
  33. * - LCD controller
  34. * - Extra features
  35. *
  36. * Advanced settings can be found in Configuration_adv.h
  37. */
  38. #define CONFIGURATION_H_VERSION 020007
  39.  
  40. //===========================================================================
  41. //============================= Getting Started =============================
  42. //===========================================================================
  43.  
  44. /**
  45. * Here are some standard links for getting your machine calibrated:
  46. *
  47. * https://reprap.org/wiki/Calibration
  48. * https://youtu.be/wAL9d7FgInk
  49. * http://calculator.josefprusa.cz
  50. * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
  51. * https://www.thingiverse.com/thing:5573
  52. * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
  53. * https://www.thingiverse.com/thing:298812
  54. */
  55.  
  56. //===========================================================================
  57. //============================= DELTA Printer ===============================
  58. //===========================================================================
  59. // For a Delta printer start with one of the configuration files in the
  60. // config/examples/delta directory and customize for your machine.
  61. //
  62.  
  63. //===========================================================================
  64. //============================= SCARA Printer ===============================
  65. //===========================================================================
  66. // For a SCARA printer start with the configuration files in
  67. // config/examples/SCARA and customize for your machine.
  68. //
  69.  
  70. // @section info
  71.  
  72. // Author info of this build printed to the host during boot and M115
  73. #define STRING_CONFIG_H_AUTHOR "BM Laser Config" // Who made the changes.
  74. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
  75.  
  76. /**
  77. * *** VENDORS PLEASE READ ***
  78. *
  79. * Marlin allows you to add a custom boot image for Graphical LCDs.
  80. * With this option Marlin will first show your custom screen followed
  81. * by the standard Marlin logo with version number and web URL.
  82. *
  83. * We encourage you to take advantage of this new feature and we also
  84. * respectfully request that you retain the unmodified Marlin boot screen.
  85. */
  86.  
  87. // Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION **
  88. #define SHOW_BOOTSCREEN
  89.  
  90. // Show the bitmap in Marlin/_Bootscreen.h on startup.
  91. //#define SHOW_CUSTOM_BOOTSCREEN
  92.  
  93. // Show the bitmap in Marlin/_Statusscreen.h on the status screen.
  94. //#define CUSTOM_STATUS_SCREEN_IMAGE
  95.  
  96. // @section machine
  97.  
  98. /**
  99. * Select the serial port on the board to use for communication with the host.
  100. * This allows the connection of wireless adapters (for instance) to non-default port pins.
  101. * Serial port -1 is the USB emulated serial port, if available.
  102. * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader.
  103. *
  104. * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  105. */
  106. #define SERIAL_PORT 0
  107.  
  108. /**
  109. * Select a secondary serial port on the board to use for communication with the host.
  110. * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  111. */
  112. //#define SERIAL_PORT_2 -1
  113.  
  114. /**
  115. * This setting determines the communication speed of the printer.
  116. *
  117. * 250000 works in most cases, but you might try a lower speed if
  118. * you commonly experience drop-outs during host printing.
  119. * You may try up to 1000000 to speed up SD file transfer.
  120. *
  121. * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
  122. */
  123. #define BAUDRATE 115200
  124.  
  125. // Enable the Bluetooth serial interface on AT90USB devices
  126. //#define BLUETOOTH
  127.  
  128. // Choose the name from boards.h that matches your setup
  129. #ifndef MOTHERBOARD
  130. #define MOTHERBOARD BOARD_RAMPS_14_SF //BOARD_RAMPS_DUO_SF //BOARD_RAMPS_DUO_EFB
  131. #endif
  132.  
  133. // Name displayed in the LCD "Ready" message and Info menu
  134. #define CUSTOM_MACHINE_NAME "BM Laser Machine"
  135.  
  136. // Printer's unique ID, used by some programs to differentiate between machines.
  137. // Choose your own or use a service like https://www.uuidgenerator.net/version4
  138. //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
  139.  
  140. // @section extruder
  141.  
  142. // This defines the number of extruders
  143. // :[0, 1, 2, 3, 4, 5, 6, 7, 8]
  144. #define EXTRUDERS 0
  145.  
  146. // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
  147. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
  148.  
  149. // For Cyclops or any "multi-extruder" that shares a single nozzle.
  150. //#define SINGLENOZZLE
  151.  
  152. // Save and restore temperature and fan speed on tool-change.
  153. // Set standby for the unselected tool with M104/106/109 T...
  154. #if ENABLED(SINGLENOZZLE)
  155. //#define SINGLENOZZLE_STANDBY_TEMP
  156. //#define SINGLENOZZLE_STANDBY_FAN
  157. #endif
  158.  
  159. /**
  160. * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
  161. *
  162. * This device allows one stepper driver on a control board to drive
  163. * two to eight stepper motors, one at a time, in a manner suitable
  164. * for extruders.
  165. *
  166. * This option only allows the multiplexer to switch on tool-change.
  167. * Additional options to configure custom E moves are pending.
  168. */
  169. //#define MK2_MULTIPLEXER
  170. #if ENABLED(MK2_MULTIPLEXER)
  171. // Override the default DIO selector pins here, if needed.
  172. // Some pins files may provide defaults for these pins.
  173. //#define E_MUX0_PIN 40 // Always Required
  174. //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs
  175. //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs
  176. #endif
  177.  
  178. /**
  179. * Průša Multi-Material Unit v2
  180. *
  181. * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
  182. * Requires EXTRUDERS = 5
  183. *
  184. * For additional configuration see Configuration_adv.h
  185. */
  186. //#define PRUSA_MMU2
  187.  
  188. // A dual extruder that uses a single stepper motor
  189. //#define SWITCHING_EXTRUDER
  190. #if ENABLED(SWITCHING_EXTRUDER)
  191. #define SWITCHING_EXTRUDER_SERVO_NR 0
  192. #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
  193. #if EXTRUDERS > 3
  194. #define SWITCHING_EXTRUDER_E23_SERVO_NR 1
  195. #endif
  196. #endif
  197.  
  198. // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
  199. //#define SWITCHING_NOZZLE
  200. #if ENABLED(SWITCHING_NOZZLE)
  201. #define SWITCHING_NOZZLE_SERVO_NR 0
  202. //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second
  203. #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo)
  204. #endif
  205.  
  206. /**
  207. * Two separate X-carriages with extruders that connect to a moving part
  208. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
  209. */
  210. //#define PARKING_EXTRUDER
  211.  
  212. /**
  213. * Two separate X-carriages with extruders that connect to a moving part
  214. * via a magnetic docking mechanism using movements and no solenoid
  215. *
  216. * project : https://www.thingiverse.com/thing:3080893
  217. * movements : https://youtu.be/0xCEiG9VS3k
  218. * https://youtu.be/Bqbcs0CU2FE
  219. */
  220. //#define MAGNETIC_PARKING_EXTRUDER
  221.  
  222. #if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
  223.  
  224. #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
  225. #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
  226. //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381
  227.  
  228. #if ENABLED(PARKING_EXTRUDER)
  229.  
  230. #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage
  231. #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil
  232. #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined.
  233. //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381
  234.  
  235. #elif ENABLED(MAGNETIC_PARKING_EXTRUDER)
  236.  
  237. #define MPE_FAST_SPEED 9000 // (mm/min) Speed for travel before last distance point
  238. #define MPE_SLOW_SPEED 4500 // (mm/min) Speed for last distance travel to park and couple
  239. #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point
  240. #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling
  241.  
  242. #endif
  243.  
  244. #endif
  245.  
  246. /**
  247. * Switching Toolhead
  248. *
  249. * Support for swappable and dockable toolheads, such as
  250. * the E3D Tool Changer. Toolheads are locked with a servo.
  251. */
  252. //#define SWITCHING_TOOLHEAD
  253.  
  254. /**
  255. * Magnetic Switching Toolhead
  256. *
  257. * Support swappable and dockable toolheads with a magnetic
  258. * docking mechanism using movement and no servo.
  259. */
  260. //#define MAGNETIC_SWITCHING_TOOLHEAD
  261.  
  262. /**
  263. * Electromagnetic Switching Toolhead
  264. *
  265. * Parking for CoreXY / HBot kinematics.
  266. * Toolheads are parked at one edge and held with an electromagnet.
  267. * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
  268. */
  269. //#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
  270.  
  271. #if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
  272. #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
  273. #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
  274. #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
  275. #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
  276. #if ENABLED(SWITCHING_TOOLHEAD)
  277. #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
  278. #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
  279. #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
  280. #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
  281. #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
  282. //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
  283. #if ENABLED(PRIME_BEFORE_REMOVE)
  284. #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
  285. #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
  286. #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/min) Extruder prime feedrate
  287. #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/min) Extruder retract feedrate
  288. #endif
  289. #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
  290. #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
  291. #endif
  292. #endif
  293.  
  294. /**
  295. * "Mixing Extruder"
  296. * - Adds G-codes M163 and M164 to set and "commit" the current mix factors.
  297. * - Extends the stepping routines to move multiple steppers in proportion to the mix.
  298. * - Optional support for Repetier Firmware's 'M164 S<index>' supporting virtual tools.
  299. * - This implementation supports up to two mixing extruders.
  300. * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation).
  301. */
  302. //#define MIXING_EXTRUDER
  303. #if ENABLED(MIXING_EXTRUDER)
  304. #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder
  305. #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164
  306. //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands
  307. //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD
  308. #if ENABLED(GRADIENT_MIX)
  309. //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias
  310. #endif
  311. #endif
  312.  
  313. // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
  314. // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
  315. // For the other hotends it is their distance from the extruder 0 hotend.
  316. //#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
  317. //#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
  318. //#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
  319.  
  320. // @section machine
  321.  
  322. /**
  323. * Power Supply Control
  324. *
  325. * Enable and connect the power supply to the PS_ON_PIN.
  326. * Specify whether the power supply is active HIGH or active LOW.
  327. */
  328. //#define PSU_CONTROL
  329. //#define PSU_NAME "Power Supply"
  330.  
  331. #if ENABLED(PSU_CONTROL)
  332. #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box
  333.  
  334. //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80
  335. //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power
  336.  
  337. //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
  338. #if ENABLED(AUTO_POWER_CONTROL)
  339. #define AUTO_POWER_FANS // Turn on PSU if fans need power
  340. #define AUTO_POWER_E_FANS
  341. #define AUTO_POWER_CONTROLLERFAN
  342. #define AUTO_POWER_CHAMBER_FAN
  343. //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature
  344. //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
  345. #define POWER_TIMEOUT 30
  346. #endif
  347. #endif
  348.  
  349. // @section temperature
  350.  
  351. //===========================================================================
  352. //============================= Thermal Settings ============================
  353. //===========================================================================
  354.  
  355. /**
  356. * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
  357. *
  358. * Temperature sensors available:
  359. *
  360. * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
  361. * -3 : thermocouple with MAX31855 (only for sensors 0-1)
  362. * -2 : thermocouple with MAX6675 (only for sensors 0-1)
  363. * -4 : thermocouple with AD8495
  364. * -1 : thermocouple with AD595
  365. * 0 : not used
  366. * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
  367. * 331 : (3.3V scaled thermistor 1 table for MEGA)
  368. * 332 : (3.3V scaled thermistor 1 table for DUE)
  369. * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
  370. * 202 : 200k thermistor - Copymaster 3D
  371. * 3 : Mendel-parts thermistor (4.7k pullup)
  372. * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
  373. * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
  374. * 501 : 100K Zonestar (Tronxy X3A) Thermistor
  375. * 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
  376. * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
  377. * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  378. * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
  379. * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
  380. * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
  381. * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
  382. * 10 : 100k RS thermistor 198-961 (4.7k pullup)
  383. * 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
  384. * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  385. * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
  386. * 15 : 100k thermistor calibration for JGAurora A5 hotend
  387. * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
  388. * 20 : Pt100 with circuit in the Ultimainboard V2.x with 5v excitation (AVR)
  389. * 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v excitation (STM32 \ LPC176x....)
  390. * 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
  391. * 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
  392. * 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
  393. * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
  394. * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  395. * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
  396. * 66 : 4.7M High Temperature thermistor from Dyze Design
  397. * 67 : 450C thermistor from SliceEngineering
  398. * 70 : the 100K thermistor found in the bq Hephestos 2
  399. * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
  400. * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
  401. *
  402. * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
  403. * (but gives greater accuracy and more stable PID)
  404. * 51 : 100k thermistor - EPCOS (1k pullup)
  405. * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
  406. * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
  407. *
  408. * 1047 : Pt1000 with 4k7 pullup (E3D)
  409. * 1010 : Pt1000 with 1k pullup (non standard)
  410. * 147 : Pt100 with 4k7 pullup
  411. * 110 : Pt100 with 1k pullup (non standard)
  412. *
  413. * 1000 : Custom - Specify parameters in Configuration_adv.h
  414. *
  415. * Use these for Testing or Development purposes. NEVER for production machine.
  416. * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  417. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  418. */
  419. #define TEMP_SENSOR_0 0
  420. #define TEMP_SENSOR_1 0
  421. #define TEMP_SENSOR_2 0
  422. #define TEMP_SENSOR_3 0
  423. #define TEMP_SENSOR_4 0
  424. #define TEMP_SENSOR_5 0
  425. #define TEMP_SENSOR_6 0
  426. #define TEMP_SENSOR_7 0
  427. #define TEMP_SENSOR_BED 0
  428. #define TEMP_SENSOR_PROBE 0
  429. #define TEMP_SENSOR_CHAMBER 0
  430.  
  431. // Dummy thermistor constant temperature readings, for use with 998 and 999
  432. #define DUMMY_THERMISTOR_998_VALUE 25
  433. #define DUMMY_THERMISTOR_999_VALUE 100
  434.  
  435. // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
  436. // from the two sensors differ too much the print will be aborted.
  437. //#define TEMP_SENSOR_1_AS_REDUNDANT
  438. #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
  439.  
  440. #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109
  441. #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
  442. #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
  443.  
  444. #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190
  445. #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
  446. #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
  447.  
  448. // Below this temperature the heater will be switched off
  449. // because it probably indicates a broken thermistor wire.
  450. #define HEATER_0_MINTEMP 5
  451. #define HEATER_1_MINTEMP 5
  452. #define HEATER_2_MINTEMP 5
  453. #define HEATER_3_MINTEMP 5
  454. #define HEATER_4_MINTEMP 5
  455. #define HEATER_5_MINTEMP 5
  456. #define HEATER_6_MINTEMP 5
  457. #define HEATER_7_MINTEMP 5
  458. #define BED_MINTEMP 5
  459.  
  460. // Above this temperature the heater will be switched off.
  461. // This can protect components from overheating, but NOT from shorts and failures.
  462. // (Use MINTEMP for thermistor short/failure protection.)
  463. #define HEATER_0_MAXTEMP 275
  464. #define HEATER_1_MAXTEMP 275
  465. #define HEATER_2_MAXTEMP 275
  466. #define HEATER_3_MAXTEMP 275
  467. #define HEATER_4_MAXTEMP 275
  468. #define HEATER_5_MAXTEMP 275
  469. #define HEATER_6_MAXTEMP 275
  470. #define HEATER_7_MAXTEMP 275
  471. #define BED_MAXTEMP 150
  472.  
  473. //===========================================================================
  474. //============================= PID Settings ================================
  475. //===========================================================================
  476. // PID Tuning Guide here: https://reprap.org/wiki/PID_Tuning
  477.  
  478. // Comment the following line to disable PID and enable bang-bang.
  479. #define PIDTEMP
  480. #define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current
  481. #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
  482. #define PID_K1 0.95 // Smoothing factor within any PID loop
  483.  
  484. #if ENABLED(PIDTEMP)
  485. //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
  486. //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
  487. //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
  488. // Set/get with gcode: M301 E[extruder number, 0-2]
  489. #if ENABLED(PID_PARAMS_PER_HOTEND)
  490. // Specify between 1 and HOTENDS values per array.
  491. // If fewer than EXTRUDER values are provided, the last element will be repeated.
  492. #define DEFAULT_Kp_LIST { 22.20, 20.0 }
  493. #define DEFAULT_Ki_LIST { 1.08, 1.0 }
  494. #define DEFAULT_Kd_LIST { 114.00, 112.0 }
  495. #else
  496. #define DEFAULT_Kp 22.20
  497. #define DEFAULT_Ki 1.08
  498. #define DEFAULT_Kd 114.00
  499. #endif
  500. #endif // PIDTEMP
  501.  
  502. //===========================================================================
  503. //====================== PID > Bed Temperature Control ======================
  504. //===========================================================================
  505.  
  506. /**
  507. * PID Bed Heating
  508. *
  509. * If this option is enabled set PID constants below.
  510. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
  511. *
  512. * The PID frequency will be the same as the extruder PWM.
  513. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
  514. * which is fine for driving a square wave into a resistive load and does not significantly
  515. * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
  516. * heater. If your configuration is significantly different than this and you don't understand
  517. * the issues involved, don't use bed PID until someone else verifies that your hardware works.
  518. */
  519. //#define PIDTEMPBED
  520.  
  521. //#define BED_LIMIT_SWITCHING
  522.  
  523. /**
  524. * Max Bed Power
  525. * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
  526. * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
  527. * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
  528. */
  529. #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
  530.  
  531. #if ENABLED(PIDTEMPBED)
  532. //#define MIN_BED_POWER 0
  533. //#define PID_BED_DEBUG // Sends debug data to the serial port.
  534.  
  535. // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
  536. // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
  537. #define DEFAULT_bedKp 10.00
  538. #define DEFAULT_bedKi .023
  539. #define DEFAULT_bedKd 305.4
  540.  
  541. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
  542. #endif // PIDTEMPBED
  543.  
  544. #if EITHER(PIDTEMP, PIDTEMPBED)
  545. //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
  546. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
  547. //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
  548. #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
  549. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
  550. #endif
  551.  
  552. // @section extruder
  553.  
  554. /**
  555. * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
  556. * Add M302 to set the minimum extrusion temperature and/or turn
  557. * cold extrusion prevention on and off.
  558. *
  559. * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
  560. */
  561. #define PREVENT_COLD_EXTRUSION
  562. #define EXTRUDE_MINTEMP 170
  563.  
  564. /**
  565. * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
  566. * Note: For Bowden Extruders make this large enough to allow load/unload.
  567. */
  568. #define PREVENT_LENGTHY_EXTRUDE
  569. #define EXTRUDE_MAXLENGTH 200
  570.  
  571. //===========================================================================
  572. //======================== Thermal Runaway Protection =======================
  573. //===========================================================================
  574.  
  575. /**
  576. * Thermal Protection provides additional protection to your printer from damage
  577. * and fire. Marlin always includes safe min and max temperature ranges which
  578. * protect against a broken or disconnected thermistor wire.
  579. *
  580. * The issue: If a thermistor falls out, it will report the much lower
  581. * temperature of the air in the room, and the the firmware will keep
  582. * the heater on.
  583. *
  584. * If you get "Thermal Runaway" or "Heating failed" errors the
  585. * details can be tuned in Configuration_adv.h
  586. */
  587.  
  588. #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
  589. #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
  590. #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
  591.  
  592. //===========================================================================
  593. //============================= Mechanical Settings =========================
  594. //===========================================================================
  595.  
  596. // @section machine
  597.  
  598. // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
  599. // either in the usual order or reversed
  600. //#define COREXY
  601. //#define COREXZ
  602. //#define COREYZ
  603. //#define COREYX
  604. //#define COREZX
  605. //#define COREZY
  606. //#define MARKFORGED_XY // MarkForged. See https://reprap.org/forum/read.php?152,504042
  607.  
  608. //===========================================================================
  609. //============================== Endstop Settings ===========================
  610. //===========================================================================
  611.  
  612. // @section homing
  613.  
  614. // Specify here all the endstop connectors that are connected to any endstop or probe.
  615. // Almost all printers will be using one per axis. Probes will use one or more of the
  616. // extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
  617. #define USE_XMIN_PLUG
  618. #define USE_YMIN_PLUG
  619. #define USE_ZMIN_PLUG
  620. //#define USE_XMAX_PLUG
  621. //#define USE_YMAX_PLUG
  622. //#define USE_ZMAX_PLUG
  623.  
  624. // Enable pullup for all endstops to prevent a floating state
  625. #define ENDSTOPPULLUPS
  626. #if DISABLED(ENDSTOPPULLUPS)
  627. // Disable ENDSTOPPULLUPS to set pullups individually
  628. //#define ENDSTOPPULLUP_XMAX
  629. //#define ENDSTOPPULLUP_YMAX
  630. //#define ENDSTOPPULLUP_ZMAX
  631. //#define ENDSTOPPULLUP_XMIN
  632. //#define ENDSTOPPULLUP_YMIN
  633. //#define ENDSTOPPULLUP_ZMIN
  634. //#define ENDSTOPPULLUP_ZMIN_PROBE
  635. #endif
  636.  
  637. // Enable pulldown for all endstops to prevent a floating state
  638. //#define ENDSTOPPULLDOWNS
  639. #if DISABLED(ENDSTOPPULLDOWNS)
  640. // Disable ENDSTOPPULLDOWNS to set pulldowns individually
  641. //#define ENDSTOPPULLDOWN_XMAX
  642. //#define ENDSTOPPULLDOWN_YMAX
  643. //#define ENDSTOPPULLDOWN_ZMAX
  644. //#define ENDSTOPPULLDOWN_XMIN
  645. //#define ENDSTOPPULLDOWN_YMIN
  646. //#define ENDSTOPPULLDOWN_ZMIN
  647. //#define ENDSTOPPULLDOWN_ZMIN_PROBE
  648. #endif
  649.  
  650. // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
  651. #define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  652. #define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  653. #define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  654. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  655. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  656. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  657. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
  658.  
  659. /**
  660. * Stepper Drivers
  661. *
  662. * These settings allow Marlin to tune stepper driver timing and enable advanced options for
  663. * stepper drivers that support them. You may also override timing options in Configuration_adv.h.
  664. *
  665. * A4988 is assumed for unspecified drivers.
  666. *
  667. * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01,
  668. * TB6560, TB6600, TMC2100,
  669. * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE,
  670. * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE,
  671. * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE,
  672. * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
  673. * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
  674. */
  675. #define X_DRIVER_TYPE DRV8825
  676. #define Y_DRIVER_TYPE DRV8825
  677. #define Z_DRIVER_TYPE DRV8825
  678. //#define X2_DRIVER_TYPE A4988
  679. //#define Y2_DRIVER_TYPE A4988
  680. //#define Z2_DRIVER_TYPE A4988
  681. //#define Z3_DRIVER_TYPE A4988
  682. //#define Z4_DRIVER_TYPE A4988
  683. //#define E0_DRIVER_TYPE A4988
  684. //#define E1_DRIVER_TYPE A4988
  685. //#define E2_DRIVER_TYPE A4988
  686. //#define E3_DRIVER_TYPE A4988
  687. //#define E4_DRIVER_TYPE A4988
  688. //#define E5_DRIVER_TYPE A4988
  689. //#define E6_DRIVER_TYPE A4988
  690. //#define E7_DRIVER_TYPE A4988
  691.  
  692. // Enable this feature if all enabled endstop pins are interrupt-capable.
  693. // This will remove the need to poll the interrupt pins, saving many CPU cycles.
  694. //#define ENDSTOP_INTERRUPTS_FEATURE
  695.  
  696. /**
  697. * Endstop Noise Threshold
  698. *
  699. * Enable if your probe or endstops falsely trigger due to noise.
  700. *
  701. * - Higher values may affect repeatability or accuracy of some bed probes.
  702. * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  703. * - This feature is not required for common micro-switches mounted on PCBs
  704. * based on the Makerbot design, which already have the 100nF capacitor.
  705. *
  706. * :[2,3,4,5,6,7]
  707. */
  708. //#define ENDSTOP_NOISE_THRESHOLD 2
  709.  
  710. // Check for stuck or disconnected endstops during homing moves.
  711. //#define DETECT_BROKEN_ENDSTOP
  712.  
  713. //=============================================================================
  714. //============================== Movement Settings ============================
  715. //=============================================================================
  716. // @section motion
  717.  
  718. /**
  719. * Default Settings
  720. *
  721. * These settings can be reset by M502
  722. *
  723. * Note that if EEPROM is enabled, saved values will override these.
  724. */
  725.  
  726. /**
  727. * With this option each E stepper can have its own factors for the
  728. * following movement settings. If fewer factors are given than the
  729. * total number of extruders, the last value applies to the rest.
  730. */
  731. //#define DISTINCT_E_FACTORS
  732.  
  733. /**
  734. * Default Axis Steps Per Unit (steps/mm)
  735. * Override with M92
  736. * X, Y, Z, E0 [, E1[, E2...]]
  737. */
  738. #define DEFAULT_AXIS_STEPS_PER_UNIT { 165, 165, 6400, 500 }
  739.  
  740. /**
  741. * Default Max Feed Rate (mm/s)
  742. * Override with M203
  743. * X, Y, Z, E0 [, E1[, E2...]]
  744. */
  745. #define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
  746.  
  747. //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
  748. #if ENABLED(LIMITED_MAX_FR_EDITING)
  749. #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits
  750. #endif
  751.  
  752. /**
  753. * Default Max Acceleration (change/s) change = mm/s
  754. * (Maximum start speed for accelerated moves)
  755. * Override with M201
  756. * X, Y, Z, E0 [, E1[, E2...]]
  757. */
  758. #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }
  759.  
  760. //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
  761. #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
  762. #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits
  763. #endif
  764.  
  765. /**
  766. * Default Acceleration (change/s) change = mm/s
  767. * Override with M204
  768. *
  769. * M204 P Acceleration
  770. * M204 R Retract Acceleration
  771. * M204 T Travel Acceleration
  772. */
  773. #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
  774. #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
  775. #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
  776.  
  777. /**
  778. * Default Jerk limits (mm/s)
  779. * Override with M205 X Y Z E
  780. *
  781. * "Jerk" specifies the minimum speed change that requires acceleration.
  782. * When changing speed and direction, if the difference is less than the
  783. * value set here, it may happen instantaneously.
  784. */
  785. //#define CLASSIC_JERK
  786. #if ENABLED(CLASSIC_JERK)
  787. #define DEFAULT_XJERK 10.0
  788. #define DEFAULT_YJERK 10.0
  789. #define DEFAULT_ZJERK 0.3
  790.  
  791. //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves
  792.  
  793. //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2
  794. #if ENABLED(LIMITED_JERK_EDITING)
  795. #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits
  796. #endif
  797. #endif
  798.  
  799. #define DEFAULT_EJERK 5.0 // May be used by Linear Advance
  800.  
  801. /**
  802. * Junction Deviation Factor
  803. *
  804. * See:
  805. * https://reprap.org/forum/read.php?1,739819
  806. * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
  807. */
  808. #if DISABLED(CLASSIC_JERK)
  809. #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
  810. #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle
  811. // for small segments (< 1mm) with large junction angles (> 135°).
  812. #endif
  813.  
  814. /**
  815. * S-Curve Acceleration
  816. *
  817. * This option eliminates vibration during printing by fitting a Bézier
  818. * curve to move acceleration, producing much smoother direction changes.
  819. *
  820. * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
  821. */
  822. //#define S_CURVE_ACCELERATION
  823.  
  824. //===========================================================================
  825. //============================= Z Probe Options =============================
  826. //===========================================================================
  827. // @section probes
  828.  
  829. //
  830. // See https://marlinfw.org/docs/configuration/probes.html
  831. //
  832.  
  833. /**
  834. * Enable this option for a probe connected to the Z-MIN pin.
  835. * The probe replaces the Z-MIN endstop and is used for Z homing.
  836. * (Automatically enables USE_PROBE_FOR_Z_HOMING.)
  837. */
  838. #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
  839.  
  840. // Force the use of the probe for Z-axis homing
  841. //#define USE_PROBE_FOR_Z_HOMING
  842.  
  843. /**
  844. * Z_MIN_PROBE_PIN
  845. *
  846. * Define this pin if the probe is not connected to Z_MIN_PIN.
  847. * If not defined the default pin for the selected MOTHERBOARD
  848. * will be used. Most of the time the default is what you want.
  849. *
  850. * - The simplest option is to use a free endstop connector.
  851. * - Use 5V for powered (usually inductive) sensors.
  852. *
  853. * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin:
  854. * - For simple switches connect...
  855. * - normally-closed switches to GND and D32.
  856. * - normally-open switches to 5V and D32.
  857. */
  858. //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
  859.  
  860. /**
  861. * Probe Type
  862. *
  863. * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
  864. * Activate one of these to use Auto Bed Leveling below.
  865. */
  866.  
  867. /**
  868. * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe.
  869. * Use G29 repeatedly, adjusting the Z height at each point with movement commands
  870. * or (with LCD_BED_LEVELING) the LCD controller.
  871. */
  872. //#define PROBE_MANUALLY
  873. //#define MANUAL_PROBE_START_Z 0.2
  874.  
  875. /**
  876. * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
  877. * (e.g., an inductive probe or a nozzle-based probe-switch.)
  878. */
  879. //#define FIX_MOUNTED_PROBE
  880.  
  881. /**
  882. * Use the nozzle as the probe, as with a conductive
  883. * nozzle system or a piezo-electric smart effector.
  884. */
  885. //#define NOZZLE_AS_PROBE
  886.  
  887. /**
  888. * Z Servo Probe, such as an endstop switch on a rotating arm.
  889. */
  890. //#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
  891. //#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
  892.  
  893. /**
  894. * The BLTouch probe uses a Hall effect sensor and emulates a servo.
  895. */
  896. //#define BLTOUCH
  897.  
  898. /**
  899. * Pressure sensor with a BLTouch-like interface
  900. */
  901. //#define CREALITY_TOUCH
  902.  
  903. /**
  904. * Touch-MI Probe by hotends.fr
  905. *
  906. * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
  907. * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
  908. * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
  909. *
  910. * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
  911. * and a minimum Z_HOMING_HEIGHT of 10.
  912. */
  913. //#define TOUCH_MI_PROBE
  914. #if ENABLED(TOUCH_MI_PROBE)
  915. #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
  916. //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
  917. //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu)
  918. #endif
  919.  
  920. // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
  921. //#define SOLENOID_PROBE
  922.  
  923. // A sled-mounted probe like those designed by Charles Bell.
  924. //#define Z_PROBE_SLED
  925. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
  926.  
  927. // A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
  928. //#define RACK_AND_PINION_PROBE
  929. #if ENABLED(RACK_AND_PINION_PROBE)
  930. #define Z_PROBE_DEPLOY_X X_MIN_POS
  931. #define Z_PROBE_RETRACT_X X_MAX_POS
  932. #endif
  933.  
  934. // Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J
  935. // When the pin is defined you can use M672 to set/reset the probe sensivity.
  936. //#define DUET_SMART_EFFECTOR
  937. #if ENABLED(DUET_SMART_EFFECTOR)
  938. #define SMART_EFFECTOR_MOD_PIN -1 // Connect a GPIO pin to the Smart Effector MOD pin
  939. #endif
  940.  
  941. /**
  942. * Use StallGuard2 to probe the bed with the nozzle.
  943. * Requires stallGuard-capable Trinamic stepper drivers.
  944. * CAUTION: This can damage machines with Z lead screws.
  945. * Take extreme care when setting up this feature.
  946. */
  947. //#define SENSORLESS_PROBING
  948.  
  949. //
  950. // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
  951. //
  952.  
  953. /**
  954. * Nozzle-to-Probe offsets { X, Y, Z }
  955. *
  956. * - Use a caliper or ruler to measure the distance from the tip of
  957. * the Nozzle to the center-point of the Probe in the X and Y axes.
  958. * - For the Z offset use your best known value and adjust at runtime.
  959. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
  960. *
  961. * Assuming the typical work area orientation:
  962. * - Probe to RIGHT of the Nozzle has a Positive X offset
  963. * - Probe to LEFT of the Nozzle has a Negative X offset
  964. * - Probe in BACK of the Nozzle has a Positive Y offset
  965. * - Probe in FRONT of the Nozzle has a Negative Y offset
  966. *
  967. * Some examples:
  968. * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, -1 } // Example "1"
  969. * #define NOZZLE_TO_PROBE_OFFSET {-10, 5, -1 } // Example "2"
  970. * #define NOZZLE_TO_PROBE_OFFSET { 5, -5, -1 } // Example "3"
  971. * #define NOZZLE_TO_PROBE_OFFSET {-15,-10, -1 } // Example "4"
  972. *
  973. * +-- BACK ---+
  974. * | [+] |
  975. * L | 1 | R <-- Example "1" (right+, back+)
  976. * E | 2 | I <-- Example "2" ( left-, back+)
  977. * F |[-] N [+]| G <-- Nozzle
  978. * T | 3 | H <-- Example "3" (right+, front-)
  979. * | 4 | T <-- Example "4" ( left-, front-)
  980. * | [-] |
  981. * O-- FRONT --+
  982. */
  983. #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
  984.  
  985. // Most probes should stay away from the edges of the bed, but
  986. // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
  987. #define PROBING_MARGIN 10
  988.  
  989. // X and Y axis travel speed (mm/min) between probes
  990. #define XY_PROBE_SPEED (133*60)
  991.  
  992. // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
  993. #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
  994.  
  995. // Feedrate (mm/min) for the "accurate" probe of each point
  996. #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
  997.  
  998. /**
  999. * Multiple Probing
  1000. *
  1001. * You may get improved results by probing 2 or more times.
  1002. * With EXTRA_PROBING the more atypical reading(s) will be disregarded.
  1003. *
  1004. * A total of 2 does fast/slow probes with a weighted average.
  1005. * A total of 3 or more adds more slow probes, taking the average.
  1006. */
  1007. //#define MULTIPLE_PROBING 2
  1008. //#define EXTRA_PROBING 1
  1009.  
  1010. /**
  1011. * Z probes require clearance when deploying, stowing, and moving between
  1012. * probe points to avoid hitting the bed and other hardware.
  1013. * Servo-mounted probes require extra space for the arm to rotate.
  1014. * Inductive probes need space to keep from triggering early.
  1015. *
  1016. * Use these settings to specify the distance (mm) to raise the probe (or
  1017. * lower the bed). The values set here apply over and above any (negative)
  1018. * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD.
  1019. * Only integer values >= 1 are valid here.
  1020. *
  1021. * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
  1022. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
  1023. */
  1024. #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
  1025. #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
  1026. #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
  1027. //#define Z_AFTER_PROBING 5 // Z position after probing is done
  1028.  
  1029. #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
  1030.  
  1031. // For M851 give a range for adjusting the Z probe offset
  1032. #define Z_PROBE_OFFSET_RANGE_MIN -20
  1033. #define Z_PROBE_OFFSET_RANGE_MAX 20
  1034.  
  1035. // Enable the M48 repeatability test to test probe accuracy
  1036. //#define Z_MIN_PROBE_REPEATABILITY_TEST
  1037.  
  1038. // Before deploy/stow pause for user confirmation
  1039. //#define PAUSE_BEFORE_DEPLOY_STOW
  1040. #if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
  1041. //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
  1042. #endif
  1043.  
  1044. /**
  1045. * Enable one or more of the following if probing seems unreliable.
  1046. * Heaters and/or fans can be disabled during probing to minimize electrical
  1047. * noise. A delay can also be added to allow noise and vibration to settle.
  1048. * These options are most useful for the BLTouch probe, but may also improve
  1049. * readings with inductive probes and piezo sensors.
  1050. */
  1051. //#define PROBING_HEATERS_OFF // Turn heaters off when probing
  1052. #if ENABLED(PROBING_HEATERS_OFF)
  1053. //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy)
  1054. #endif
  1055. //#define PROBING_FANS_OFF // Turn fans off when probing
  1056. //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing
  1057. //#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors
  1058.  
  1059. // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
  1060. // :{ 0:'Low', 1:'High' }
  1061. #define X_ENABLE_ON 0
  1062. #define Y_ENABLE_ON 0
  1063. #define Z_ENABLE_ON 0
  1064. #define E_ENABLE_ON 0 // For all extruders
  1065.  
  1066. // Disable axis steppers immediately when they're not being stepped.
  1067. // WARNING: When motors turn off there is a chance of losing position accuracy!
  1068. #define DISABLE_X true
  1069. #define DISABLE_Y true
  1070. #define DISABLE_Z true
  1071.  
  1072. // Turn off the display blinking that warns about possible accuracy reduction
  1073. //#define DISABLE_REDUCED_ACCURACY_WARNING
  1074.  
  1075. // @section extruder
  1076.  
  1077. #define DISABLE_E false // Disable the extruder when not stepping
  1078. #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
  1079.  
  1080. // @section machine
  1081.  
  1082. // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
  1083. #define INVERT_X_DIR false
  1084. #define INVERT_Y_DIR true
  1085. #define INVERT_Z_DIR false
  1086.  
  1087. // @section extruder
  1088.  
  1089. // For direct drive extruder v9 set to true, for geared extruder set to false.
  1090. #define INVERT_E0_DIR false
  1091. #define INVERT_E1_DIR false
  1092. #define INVERT_E2_DIR false
  1093. #define INVERT_E3_DIR false
  1094. #define INVERT_E4_DIR false
  1095. #define INVERT_E5_DIR false
  1096. #define INVERT_E6_DIR false
  1097. #define INVERT_E7_DIR false
  1098.  
  1099. // @section homing
  1100.  
  1101. #define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
  1102.  
  1103. #define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
  1104.  
  1105. //#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
  1106. // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
  1107.  
  1108. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z
  1109.  
  1110. // Direction of endstops when homing; 1=MAX, -1=MIN
  1111. // :[-1,1]
  1112. #define X_HOME_DIR -1
  1113. #define Y_HOME_DIR -1
  1114. #define Z_HOME_DIR -1
  1115.  
  1116. // @section machine
  1117.  
  1118. // The size of the print bed
  1119. #define X_BED_SIZE 220
  1120. #define Y_BED_SIZE 350
  1121.  
  1122. // Travel limits (mm) after homing, corresponding to endstop positions.
  1123. #define X_MIN_POS 0
  1124. #define Y_MIN_POS 0
  1125. #define Z_MIN_POS 0
  1126. #define X_MAX_POS X_BED_SIZE
  1127. #define Y_MAX_POS Y_BED_SIZE
  1128. #define Z_MAX_POS 40
  1129.  
  1130. /**
  1131. * Software Endstops
  1132. *
  1133. * - Prevent moves outside the set machine bounds.
  1134. * - Individual axes can be disabled, if desired.
  1135. * - X and Y only apply to Cartesian robots.
  1136. * - Use 'M211' to set software endstops on/off or report current state
  1137. */
  1138.  
  1139. // Min software endstops constrain movement within minimum coordinate bounds
  1140. #define MIN_SOFTWARE_ENDSTOPS
  1141. #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
  1142. #define MIN_SOFTWARE_ENDSTOP_X
  1143. #define MIN_SOFTWARE_ENDSTOP_Y
  1144. #define MIN_SOFTWARE_ENDSTOP_Z
  1145. #endif
  1146.  
  1147. // Max software endstops constrain movement within maximum coordinate bounds
  1148. #define MAX_SOFTWARE_ENDSTOPS
  1149. #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
  1150. #define MAX_SOFTWARE_ENDSTOP_X
  1151. #define MAX_SOFTWARE_ENDSTOP_Y
  1152. #define MAX_SOFTWARE_ENDSTOP_Z
  1153. #endif
  1154.  
  1155. #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
  1156. //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
  1157. #endif
  1158.  
  1159. /**
  1160. * Filament Runout Sensors
  1161. * Mechanical or opto endstops are used to check for the presence of filament.
  1162. *
  1163. * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
  1164. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
  1165. */
  1166. //#define FILAMENT_RUNOUT_SENSOR
  1167. #if ENABLED(FILAMENT_RUNOUT_SENSOR)
  1168. #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
  1169. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
  1170. #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present.
  1171. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
  1172. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
  1173.  
  1174. // Set one or more commands to execute on filament runout.
  1175. // (After 'M412 H' Marlin will ask the host to handle the process.)
  1176. #define FILAMENT_RUNOUT_SCRIPT "M600"
  1177.  
  1178. // After a runout is detected, continue printing this length of filament
  1179. // before executing the runout script. Useful for a sensor at the end of
  1180. // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.
  1181. //#define FILAMENT_RUNOUT_DISTANCE_MM 25
  1182.  
  1183. #ifdef FILAMENT_RUNOUT_DISTANCE_MM
  1184. // Enable this option to use an encoder disc that toggles the runout pin
  1185. // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM
  1186. // large enough to avoid false positives.)
  1187. //#define FILAMENT_MOTION_SENSOR
  1188. #endif
  1189. #endif
  1190.  
  1191. //===========================================================================
  1192. //=============================== Bed Leveling ==============================
  1193. //===========================================================================
  1194. // @section calibrate
  1195.  
  1196. /**
  1197. * Choose one of the options below to enable G29 Bed Leveling. The parameters
  1198. * and behavior of G29 will change depending on your selection.
  1199. *
  1200. * If using a Probe for Z Homing, enable Z_SAFE_HOMING also!
  1201. *
  1202. * - AUTO_BED_LEVELING_3POINT
  1203. * Probe 3 arbitrary points on the bed (that aren't collinear)
  1204. * You specify the XY coordinates of all 3 points.
  1205. * The result is a single tilted plane. Best for a flat bed.
  1206. *
  1207. * - AUTO_BED_LEVELING_LINEAR
  1208. * Probe several points in a grid.
  1209. * You specify the rectangle and the density of sample points.
  1210. * The result is a single tilted plane. Best for a flat bed.
  1211. *
  1212. * - AUTO_BED_LEVELING_BILINEAR
  1213. * Probe several points in a grid.
  1214. * You specify the rectangle and the density of sample points.
  1215. * The result is a mesh, best for large or uneven beds.
  1216. *
  1217. * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  1218. * A comprehensive bed leveling system combining the features and benefits
  1219. * of other systems. UBL also includes integrated Mesh Generation, Mesh
  1220. * Validation and Mesh Editing systems.
  1221. *
  1222. * - MESH_BED_LEVELING
  1223. * Probe a grid manually
  1224. * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.)
  1225. * For machines without a probe, Mesh Bed Leveling provides a method to perform
  1226. * leveling in steps so you can manually adjust the Z height at each grid-point.
  1227. * With an LCD controller the process is guided step-by-step.
  1228. */
  1229. //#define AUTO_BED_LEVELING_3POINT
  1230. //#define AUTO_BED_LEVELING_LINEAR
  1231. //#define AUTO_BED_LEVELING_BILINEAR
  1232. //#define AUTO_BED_LEVELING_UBL
  1233. //#define MESH_BED_LEVELING
  1234.  
  1235. /**
  1236. * Normally G28 leaves leveling disabled on completion. Enable
  1237. * this option to have G28 restore the prior leveling state.
  1238. */
  1239. //#define RESTORE_LEVELING_AFTER_G28
  1240.  
  1241. /**
  1242. * Enable detailed logging of G28, G29, M48, etc.
  1243. * Turn on with the command 'M111 S32'.
  1244. * NOTE: Requires a lot of PROGMEM!
  1245. */
  1246. //#define DEBUG_LEVELING_FEATURE
  1247.  
  1248. #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
  1249. // Gradually reduce leveling correction until a set height is reached,
  1250. // at which point movement will be level to the machine's XY plane.
  1251. // The height can be set with M420 Z<height>
  1252. #define ENABLE_LEVELING_FADE_HEIGHT
  1253.  
  1254. // For Cartesian machines, instead of dividing moves on mesh boundaries,
  1255. // split up moves into short segments like a Delta. This follows the
  1256. // contours of the bed more closely than edge-to-edge straight moves.
  1257. #define SEGMENT_LEVELED_MOVES
  1258. #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
  1259.  
  1260. /**
  1261. * Enable the G26 Mesh Validation Pattern tool.
  1262. */
  1263. //#define G26_MESH_VALIDATION
  1264. #if ENABLED(G26_MESH_VALIDATION)
  1265. #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
  1266. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
  1267. #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
  1268. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
  1269. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool.
  1270. #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements.
  1271. #endif
  1272.  
  1273. #endif
  1274.  
  1275. #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
  1276.  
  1277. // Set the number of grid points per dimension.
  1278. #define GRID_MAX_POINTS_X 3
  1279. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  1280.  
  1281. // Probe along the Y axis, advancing X after each column
  1282. //#define PROBE_Y_FIRST
  1283.  
  1284. #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
  1285.  
  1286. // Beyond the probed grid, continue the implied tilt?
  1287. // Default is to maintain the height of the nearest edge.
  1288. //#define EXTRAPOLATE_BEYOND_GRID
  1289.  
  1290. //
  1291. // Experimental Subdivision of the grid by Catmull-Rom method.
  1292. // Synthesizes intermediate points to produce a more detailed mesh.
  1293. //
  1294. //#define ABL_BILINEAR_SUBDIVISION
  1295. #if ENABLED(ABL_BILINEAR_SUBDIVISION)
  1296. // Number of subdivisions between probe points
  1297. #define BILINEAR_SUBDIVISIONS 3
  1298. #endif
  1299.  
  1300. #endif
  1301.  
  1302. #elif ENABLED(AUTO_BED_LEVELING_UBL)
  1303.  
  1304. //===========================================================================
  1305. //========================= Unified Bed Leveling ============================
  1306. //===========================================================================
  1307.  
  1308. //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
  1309.  
  1310. #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed
  1311. #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
  1312. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  1313.  
  1314. #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
  1315. #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
  1316.  
  1317. //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
  1318. // as the Z-Height correction value.
  1319.  
  1320. #elif ENABLED(MESH_BED_LEVELING)
  1321.  
  1322. //===========================================================================
  1323. //=================================== Mesh ==================================
  1324. //===========================================================================
  1325.  
  1326. #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed
  1327. #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited.
  1328. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  1329.  
  1330. //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
  1331.  
  1332. #endif // BED_LEVELING
  1333.  
  1334. /**
  1335. * Add a bed leveling sub-menu for ABL or MBL.
  1336. * Include a guided procedure if manual probing is enabled.
  1337. */
  1338. //#define LCD_BED_LEVELING
  1339.  
  1340. #if ENABLED(LCD_BED_LEVELING)
  1341. #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis.
  1342. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
  1343. //#define MESH_EDIT_MENU // Add a menu to edit mesh points
  1344. #endif
  1345.  
  1346. // Add a menu item to move between bed corners for manual bed adjustment
  1347. //#define LEVEL_BED_CORNERS
  1348.  
  1349. #if ENABLED(LEVEL_BED_CORNERS)
  1350. #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
  1351. #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points
  1352. #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points
  1353. //#define LEVEL_CENTER_TOO // Move to the center after the last corner
  1354. #endif
  1355.  
  1356. /**
  1357. * Commands to execute at the end of G29 probing.
  1358. * Useful to retract or move the Z probe out of the way.
  1359. */
  1360. //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"
  1361.  
  1362. // @section homing
  1363.  
  1364. // The center of the bed is at (X=0, Y=0)
  1365. //#define BED_CENTER_AT_0_0
  1366.  
  1367. // Manually set the home position. Leave these undefined for automatic settings.
  1368. // For DELTA this is the top-center of the Cartesian print volume.
  1369. //#define MANUAL_X_HOME_POS 0
  1370. //#define MANUAL_Y_HOME_POS 0
  1371. //#define MANUAL_Z_HOME_POS 0
  1372.  
  1373. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
  1374. //
  1375. // With this feature enabled:
  1376. //
  1377. // - Allow Z homing only after X and Y homing AND stepper drivers still enabled.
  1378. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
  1379. // - Move the Z probe (or nozzle) to a defined XY point before Z Homing.
  1380. // - Prevent Z homing when the Z probe is outside bed area.
  1381. //
  1382. //#define Z_SAFE_HOMING
  1383.  
  1384. #if ENABLED(Z_SAFE_HOMING)
  1385. #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing
  1386. #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing
  1387. #endif
  1388.  
  1389. // Homing speeds (mm/min)
  1390. #define HOMING_FEEDRATE_XY (50*60)
  1391. #define HOMING_FEEDRATE_Z (2*60)
  1392.  
  1393. // Validate that endstops are triggered on homing moves
  1394. #define VALIDATE_HOMING_ENDSTOPS
  1395.  
  1396. // @section calibrate
  1397.  
  1398. /**
  1399. * Bed Skew Compensation
  1400. *
  1401. * This feature corrects for misalignment in the XYZ axes.
  1402. *
  1403. * Take the following steps to get the bed skew in the XY plane:
  1404. * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185)
  1405. * 2. For XY_DIAG_AC measure the diagonal A to C
  1406. * 3. For XY_DIAG_BD measure the diagonal B to D
  1407. * 4. For XY_SIDE_AD measure the edge A to D
  1408. *
  1409. * Marlin automatically computes skew factors from these measurements.
  1410. * Skew factors may also be computed and set manually:
  1411. *
  1412. * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2
  1413. * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD)))
  1414. *
  1415. * If desired, follow the same procedure for XZ and YZ.
  1416. * Use these diagrams for reference:
  1417. *
  1418. * Y Z Z
  1419. * ^ B-------C ^ B-------C ^ B-------C
  1420. * | / / | / / | / /
  1421. * | / / | / / | / /
  1422. * | A-------D | A-------D | A-------D
  1423. * +-------------->X +-------------->X +-------------->Y
  1424. * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR
  1425. */
  1426. //#define SKEW_CORRECTION
  1427.  
  1428. #if ENABLED(SKEW_CORRECTION)
  1429. // Input all length measurements here:
  1430. #define XY_DIAG_AC 282.8427124746
  1431. #define XY_DIAG_BD 282.8427124746
  1432. #define XY_SIDE_AD 200
  1433.  
  1434. // Or, set the default skew factors directly here
  1435. // to override the above measurements:
  1436. #define XY_SKEW_FACTOR 0.0
  1437.  
  1438. //#define SKEW_CORRECTION_FOR_Z
  1439. #if ENABLED(SKEW_CORRECTION_FOR_Z)
  1440. #define XZ_DIAG_AC 282.8427124746
  1441. #define XZ_DIAG_BD 282.8427124746
  1442. #define YZ_DIAG_AC 282.8427124746
  1443. #define YZ_DIAG_BD 282.8427124746
  1444. #define YZ_SIDE_AD 200
  1445. #define XZ_SKEW_FACTOR 0.0
  1446. #define YZ_SKEW_FACTOR 0.0
  1447. #endif
  1448.  
  1449. // Enable this option for M852 to set skew at runtime
  1450. //#define SKEW_CORRECTION_GCODE
  1451. #endif
  1452.  
  1453. //=============================================================================
  1454. //============================= Additional Features ===========================
  1455. //=============================================================================
  1456.  
  1457. // @section extras
  1458.  
  1459. /**
  1460. * EEPROM
  1461. *
  1462. * Persistent storage to preserve configurable settings across reboots.
  1463. *
  1464. * M500 - Store settings to EEPROM.
  1465. * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
  1466. * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
  1467. */
  1468. #define EEPROM_SETTINGS // Persistent storage with M500 and M501
  1469. //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
  1470. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
  1471. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
  1472. #if ENABLED(EEPROM_SETTINGS)
  1473. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
  1474. #endif
  1475.  
  1476. //
  1477. // Host Keepalive
  1478. //
  1479. // When enabled Marlin will send a busy status message to the host
  1480. // every couple of seconds when it can't accept commands.
  1481. //
  1482. #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
  1483. #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
  1484. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
  1485.  
  1486. //
  1487. // G20/G21 Inch mode support
  1488. //
  1489. //#define INCH_MODE_SUPPORT
  1490.  
  1491. //
  1492. // M149 Set temperature units support
  1493. //
  1494. //#define TEMPERATURE_UNITS_SUPPORT
  1495.  
  1496. // @section temperature
  1497.  
  1498. // Preheat Constants
  1499. #define PREHEAT_1_LABEL "PLA"
  1500. #define PREHEAT_1_TEMP_HOTEND 180
  1501. #define PREHEAT_1_TEMP_BED 70
  1502. #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
  1503.  
  1504. #define PREHEAT_2_LABEL "ABS"
  1505. #define PREHEAT_2_TEMP_HOTEND 240
  1506. #define PREHEAT_2_TEMP_BED 110
  1507. #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
  1508.  
  1509. /**
  1510. * Nozzle Park
  1511. *
  1512. * Park the nozzle at the given XYZ position on idle or G27.
  1513. *
  1514. * The "P" parameter controls the action applied to the Z axis:
  1515. *
  1516. * P0 (Default) If Z is below park Z raise the nozzle.
  1517. * P1 Raise the nozzle always to Z-park height.
  1518. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
  1519. */
  1520. //#define NOZZLE_PARK_FEATURE
  1521.  
  1522. #if ENABLED(NOZZLE_PARK_FEATURE)
  1523. // Specify a park position as { X, Y, Z_raise }
  1524. #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
  1525. //#define NOZZLE_PARK_X_ONLY // X move only is required to park
  1526. //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park
  1527. #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance
  1528. #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
  1529. #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
  1530. #endif
  1531.  
  1532. /**
  1533. * Clean Nozzle Feature -- EXPERIMENTAL
  1534. *
  1535. * Adds the G12 command to perform a nozzle cleaning process.
  1536. *
  1537. * Parameters:
  1538. * P Pattern
  1539. * S Strokes / Repetitions
  1540. * T Triangles (P1 only)
  1541. *
  1542. * Patterns:
  1543. * P0 Straight line (default). This process requires a sponge type material
  1544. * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
  1545. * between the start / end points.
  1546. *
  1547. * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
  1548. * number of zig-zag triangles to do. "S" defines the number of strokes.
  1549. * Zig-zags are done in whichever is the narrower dimension.
  1550. * For example, "G12 P1 S1 T3" will execute:
  1551. *
  1552. * --
  1553. * | (X0, Y1) | /\ /\ /\ | (X1, Y1)
  1554. * | | / \ / \ / \ |
  1555. * A | | / \ / \ / \ |
  1556. * | | / \ / \ / \ |
  1557. * | (X0, Y0) | / \/ \/ \ | (X1, Y0)
  1558. * -- +--------------------------------+
  1559. * |________|_________|_________|
  1560. * T1 T2 T3
  1561. *
  1562. * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
  1563. * "R" specifies the radius. "S" specifies the stroke count.
  1564. * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
  1565. *
  1566. * Caveats: The ending Z should be the same as starting Z.
  1567. * Attention: EXPERIMENTAL. G-code arguments may change.
  1568. */
  1569. //#define NOZZLE_CLEAN_FEATURE
  1570.  
  1571. #if ENABLED(NOZZLE_CLEAN_FEATURE)
  1572. // Default number of pattern repetitions
  1573. #define NOZZLE_CLEAN_STROKES 12
  1574.  
  1575. // Default number of triangles
  1576. #define NOZZLE_CLEAN_TRIANGLES 3
  1577.  
  1578. // Specify positions for each tool as { { X, Y, Z }, { X, Y, Z } }
  1579. // Dual hotend system may use { { -20, (Y_BED_SIZE / 2), (Z_MIN_POS + 1) }, { 420, (Y_BED_SIZE / 2), (Z_MIN_POS + 1) }}
  1580. #define NOZZLE_CLEAN_START_POINT { { 30, 30, (Z_MIN_POS + 1) } }
  1581. #define NOZZLE_CLEAN_END_POINT { { 100, 60, (Z_MIN_POS + 1) } }
  1582.  
  1583. // Circular pattern radius
  1584. #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
  1585. // Circular pattern circle fragments number
  1586. #define NOZZLE_CLEAN_CIRCLE_FN 10
  1587. // Middle point of circle
  1588. #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
  1589.  
  1590. // Move the nozzle to the initial position after cleaning
  1591. #define NOZZLE_CLEAN_GOBACK
  1592.  
  1593. // For a purge/clean station that's always at the gantry height (thus no Z move)
  1594. //#define NOZZLE_CLEAN_NO_Z
  1595.  
  1596. // For a purge/clean station mounted on the X axis
  1597. //#define NOZZLE_CLEAN_NO_Y
  1598.  
  1599. // Explicit wipe G-code script applies to a G12 with no arguments.
  1600. //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
  1601.  
  1602. #endif
  1603.  
  1604. /**
  1605. * Print Job Timer
  1606. *
  1607. * Automatically start and stop the print job timer on M104/M109/M190.
  1608. *
  1609. * M104 (hotend, no wait) - high temp = none, low temp = stop timer
  1610. * M109 (hotend, wait) - high temp = start timer, low temp = stop timer
  1611. * M190 (bed, wait) - high temp = start timer, low temp = none
  1612. *
  1613. * The timer can also be controlled with the following commands:
  1614. *
  1615. * M75 - Start the print job timer
  1616. * M76 - Pause the print job timer
  1617. * M77 - Stop the print job timer
  1618. */
  1619. #define PRINTJOB_TIMER_AUTOSTART
  1620.  
  1621. /**
  1622. * Print Counter
  1623. *
  1624. * Track statistical data such as:
  1625. *
  1626. * - Total print jobs
  1627. * - Total successful print jobs
  1628. * - Total failed print jobs
  1629. * - Total time printing
  1630. *
  1631. * View the current statistics with M78.
  1632. */
  1633. //#define PRINTCOUNTER
  1634.  
  1635. /**
  1636. * Password
  1637. *
  1638. * Set a numerical password for the printer which can be requested:
  1639. *
  1640. * - When the printer boots up
  1641. * - Upon opening the 'Print from Media' Menu
  1642. * - When SD printing is completed or aborted
  1643. *
  1644. * The following G-codes can be used:
  1645. *
  1646. * M510 - Lock Printer. Blocks all commands except M511.
  1647. * M511 - Unlock Printer.
  1648. * M512 - Set, Change and Remove Password.
  1649. *
  1650. * If you forget the password and get locked out you'll need to re-flash
  1651. * the firmware with the feature disabled, reset EEPROM, and (optionally)
  1652. * re-flash the firmware again with this feature enabled.
  1653. */
  1654. //#define PASSWORD_FEATURE
  1655. #if ENABLED(PASSWORD_FEATURE)
  1656. #define PASSWORD_LENGTH 4 // (#) Number of digits (1-9). 3 or 4 is recommended
  1657. #define PASSWORD_ON_STARTUP
  1658. #define PASSWORD_UNLOCK_GCODE // Unlock with the M511 P<password> command. Disable to prevent brute-force attack.
  1659. #define PASSWORD_CHANGE_GCODE // Change the password with M512 P<old> S<new>.
  1660. //#define PASSWORD_ON_SD_PRINT_MENU // This does not prevent gcodes from running
  1661. //#define PASSWORD_AFTER_SD_PRINT_END
  1662. //#define PASSWORD_AFTER_SD_PRINT_ABORT
  1663. //#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
  1664. #endif
  1665.  
  1666. //=============================================================================
  1667. //============================= LCD and SD support ============================
  1668. //=============================================================================
  1669.  
  1670. // @section lcd
  1671.  
  1672. /**
  1673. * LCD LANGUAGE
  1674. *
  1675. * Select the language to display on the LCD. These languages are available:
  1676. *
  1677. * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, hu, it,
  1678. * jp_kana, ko_KR, nl, pl, pt, pt_br, ro, ru, sk, tr, uk, vi, zh_CN, zh_TW, test
  1679. *
  1680. * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'hu':'Hungarian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ro':'Romanian', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' }
  1681. */
  1682. #define LCD_LANGUAGE en
  1683.  
  1684. /**
  1685. * LCD Character Set
  1686. *
  1687. * Note: This option is NOT applicable to Graphical Displays.
  1688. *
  1689. * All character-based LCDs provide ASCII plus one of these
  1690. * language extensions:
  1691. *
  1692. * - JAPANESE ... the most common
  1693. * - WESTERN ... with more accented characters
  1694. * - CYRILLIC ... for the Russian language
  1695. *
  1696. * To determine the language extension installed on your controller:
  1697. *
  1698. * - Compile and upload with LCD_LANGUAGE set to 'test'
  1699. * - Click the controller to view the LCD menu
  1700. * - The LCD will display Japanese, Western, or Cyrillic text
  1701. *
  1702. * See https://marlinfw.org/docs/development/lcd_language.html
  1703. *
  1704. * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  1705. */
  1706. #define DISPLAY_CHARSET_HD44780 JAPANESE
  1707.  
  1708. /**
  1709. * Info Screen Style (0:Classic, 1:Průša)
  1710. *
  1711. * :[0:'Classic', 1:'Průša']
  1712. */
  1713. #define LCD_INFO_SCREEN_STYLE 0
  1714.  
  1715. /**
  1716. * SD CARD
  1717. *
  1718. * SD Card support is disabled by default. If your controller has an SD slot,
  1719. * you must uncomment the following option or it won't work.
  1720. */
  1721. //#define SDSUPPORT
  1722.  
  1723. /**
  1724. * SD CARD: SPI SPEED
  1725. *
  1726. * Enable one of the following items for a slower SPI transfer speed.
  1727. * This may be required to resolve "volume init" errors.
  1728. */
  1729. //#define SPI_SPEED SPI_HALF_SPEED
  1730. //#define SPI_SPEED SPI_QUARTER_SPEED
  1731. //#define SPI_SPEED SPI_EIGHTH_SPEED
  1732.  
  1733. /**
  1734. * SD CARD: ENABLE CRC
  1735. *
  1736. * Use CRC checks and retries on the SD communication.
  1737. */
  1738. //#define SD_CHECK_AND_RETRY
  1739.  
  1740. /**
  1741. * LCD Menu Items
  1742. *
  1743. * Disable all menus and only display the Status Screen, or
  1744. * just remove some extraneous menu items to recover space.
  1745. */
  1746. //#define NO_LCD_MENUS
  1747. //#define SLIM_LCD_MENUS
  1748.  
  1749. //
  1750. // ENCODER SETTINGS
  1751. //
  1752. // This option overrides the default number of encoder pulses needed to
  1753. // produce one step. Should be increased for high-resolution encoders.
  1754. //
  1755. //#define ENCODER_PULSES_PER_STEP 4
  1756.  
  1757. //
  1758. // Use this option to override the number of step signals required to
  1759. // move between next/prev menu items.
  1760. //
  1761. //#define ENCODER_STEPS_PER_MENU_ITEM 1
  1762.  
  1763. /**
  1764. * Encoder Direction Options
  1765. *
  1766. * Test your encoder's behavior first with both options disabled.
  1767. *
  1768. * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION.
  1769. * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION.
  1770. * Reversed Value Editing only? Enable BOTH options.
  1771. */
  1772.  
  1773. //
  1774. // This option reverses the encoder direction everywhere.
  1775. //
  1776. // Set this option if CLOCKWISE causes values to DECREASE
  1777. //
  1778. //#define REVERSE_ENCODER_DIRECTION
  1779.  
  1780. //
  1781. // This option reverses the encoder direction for navigating LCD menus.
  1782. //
  1783. // If CLOCKWISE normally moves DOWN this makes it go UP.
  1784. // If CLOCKWISE normally moves UP this makes it go DOWN.
  1785. //
  1786. //#define REVERSE_MENU_DIRECTION
  1787.  
  1788. //
  1789. // This option reverses the encoder direction for Select Screen.
  1790. //
  1791. // If CLOCKWISE normally moves LEFT this makes it go RIGHT.
  1792. // If CLOCKWISE normally moves RIGHT this makes it go LEFT.
  1793. //
  1794. //#define REVERSE_SELECT_DIRECTION
  1795.  
  1796. //
  1797. // Individual Axis Homing
  1798. //
  1799. // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
  1800. //
  1801. //#define INDIVIDUAL_AXIS_HOMING_MENU
  1802.  
  1803. //
  1804. // SPEAKER/BUZZER
  1805. //
  1806. // If you have a speaker that can produce tones, enable it here.
  1807. // By default Marlin assumes you have a buzzer with a fixed frequency.
  1808. //
  1809. //#define SPEAKER
  1810.  
  1811. //
  1812. // The duration and frequency for the UI feedback sound.
  1813. // Set these to 0 to disable audio feedback in the LCD menus.
  1814. //
  1815. // Note: Test audio output with the G-Code:
  1816. // M300 S<frequency Hz> P<duration ms>
  1817. //
  1818. //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
  1819. //#define LCD_FEEDBACK_FREQUENCY_HZ 5000
  1820.  
  1821. //=============================================================================
  1822. //======================== LCD / Controller Selection =========================
  1823. //======================== (Character-based LCDs) =========================
  1824. //=============================================================================
  1825.  
  1826. //
  1827. // RepRapDiscount Smart Controller.
  1828. // https://reprap.org/wiki/RepRapDiscount_Smart_Controller
  1829. //
  1830. // Note: Usually sold with a white PCB.
  1831. //
  1832. //#define REPRAP_DISCOUNT_SMART_CONTROLLER
  1833.  
  1834. //
  1835. // Original RADDS LCD Display+Encoder+SDCardReader
  1836. // http://doku.radds.org/dokumentation/lcd-display/
  1837. //
  1838. //#define RADDS_DISPLAY
  1839.  
  1840. //
  1841. // ULTIMAKER Controller.
  1842. //
  1843. //#define ULTIMAKERCONTROLLER
  1844.  
  1845. //
  1846. // ULTIPANEL as seen on Thingiverse.
  1847. //
  1848. //#define ULTIPANEL
  1849.  
  1850. //
  1851. // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
  1852. // https://reprap.org/wiki/PanelOne
  1853. //
  1854. //#define PANEL_ONE
  1855.  
  1856. //
  1857. // GADGETS3D G3D LCD/SD Controller
  1858. // https://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
  1859. //
  1860. // Note: Usually sold with a blue PCB.
  1861. //
  1862. //#define G3D_PANEL
  1863.  
  1864. //
  1865. // RigidBot Panel V1.0
  1866. // http://www.inventapart.com/
  1867. //
  1868. //#define RIGIDBOT_PANEL
  1869.  
  1870. //
  1871. // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
  1872. // https://www.aliexpress.com/item/32765887917.html
  1873. //
  1874. //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
  1875.  
  1876. //
  1877. // ANET and Tronxy 20x4 Controller
  1878. //
  1879. //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
  1880. // This LCD is known to be susceptible to electrical interference
  1881. // which scrambles the display. Pressing any button clears it up.
  1882. // This is a LCD2004 display with 5 analog buttons.
  1883.  
  1884. //
  1885. // Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
  1886. //
  1887. //#define ULTRA_LCD
  1888.  
  1889. //=============================================================================
  1890. //======================== LCD / Controller Selection =========================
  1891. //===================== (I2C and Shift-Register LCDs) =====================
  1892. //=============================================================================
  1893.  
  1894. //
  1895. // CONTROLLER TYPE: I2C
  1896. //
  1897. // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
  1898. // library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C
  1899. //
  1900.  
  1901. //
  1902. // Elefu RA Board Control Panel
  1903. // http://www.elefu.com/index.php?route=product/product&product_id=53
  1904. //
  1905. //#define RA_CONTROL_PANEL
  1906.  
  1907. //
  1908. // Sainsmart (YwRobot) LCD Displays
  1909. //
  1910. // These require F.Malpartida's LiquidCrystal_I2C library
  1911. // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
  1912. //
  1913. //#define LCD_SAINSMART_I2C_1602
  1914. //#define LCD_SAINSMART_I2C_2004
  1915.  
  1916. //
  1917. // Generic LCM1602 LCD adapter
  1918. //
  1919. //#define LCM1602
  1920.  
  1921. //
  1922. // PANELOLU2 LCD with status LEDs,
  1923. // separate encoder and click inputs.
  1924. //
  1925. // Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later.
  1926. // For more info: https://github.com/lincomatic/LiquidTWI2
  1927. //
  1928. // Note: The PANELOLU2 encoder click input can either be directly connected to
  1929. // a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
  1930. //
  1931. //#define LCD_I2C_PANELOLU2
  1932.  
  1933. //
  1934. // Panucatt VIKI LCD with status LEDs,
  1935. // integrated click & L/R/U/D buttons, separate encoder inputs.
  1936. //
  1937. //#define LCD_I2C_VIKI
  1938.  
  1939. //
  1940. // CONTROLLER TYPE: Shift register panels
  1941. //
  1942.  
  1943. //
  1944. // 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
  1945. // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD
  1946. //
  1947. //#define SAV_3DLCD
  1948.  
  1949. //
  1950. // 3-wire SR LCD with strobe using 74HC4094
  1951. // https://github.com/mikeshub/SailfishLCD
  1952. // Uses the code directly from Sailfish
  1953. //
  1954. //#define FF_INTERFACEBOARD
  1955.  
  1956. //
  1957. // TFT GLCD Panel with Marlin UI
  1958. // Panel connected to main board by SPI or I2C interface.
  1959. // See https://github.com/Serhiy-K/TFTGLCDAdapter
  1960. //
  1961. //#define TFTGLCD_PANEL_SPI
  1962. //#define TFTGLCD_PANEL_I2C
  1963.  
  1964. //=============================================================================
  1965. //======================= LCD / Controller Selection =======================
  1966. //========================= (Graphical LCDs) ========================
  1967. //=============================================================================
  1968.  
  1969. //
  1970. // CONTROLLER TYPE: Graphical 128x64 (DOGM)
  1971. //
  1972. // IMPORTANT: The U8glib library is required for Graphical Display!
  1973. // https://github.com/olikraus/U8glib_Arduino
  1974. //
  1975. // NOTE: If the LCD is unresponsive you may need to reverse the plugs.
  1976. //
  1977.  
  1978. //
  1979. // RepRapDiscount FULL GRAPHIC Smart Controller
  1980. // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
  1981. //
  1982. //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
  1983.  
  1984. //
  1985. // ReprapWorld Graphical LCD
  1986. // https://reprapworld.com/?products_details&products_id/1218
  1987. //
  1988. //#define REPRAPWORLD_GRAPHICAL_LCD
  1989.  
  1990. //
  1991. // Activate one of these if you have a Panucatt Devices
  1992. // Viki 2.0 or mini Viki with Graphic LCD
  1993. // https://www.panucatt.com
  1994. //
  1995. //#define VIKI2
  1996. //#define miniVIKI
  1997.  
  1998. //
  1999. // MakerLab Mini Panel with graphic
  2000. // controller and SD support - https://reprap.org/wiki/Mini_panel
  2001. //
  2002. //#define MINIPANEL
  2003.  
  2004. //
  2005. // MaKr3d Makr-Panel with graphic controller and SD support.
  2006. // https://reprap.org/wiki/MaKr3d_MaKrPanel
  2007. //
  2008. //#define MAKRPANEL
  2009.  
  2010. //
  2011. // Adafruit ST7565 Full Graphic Controller.
  2012. // https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
  2013. //
  2014. //#define ELB_FULL_GRAPHIC_CONTROLLER
  2015.  
  2016. //
  2017. // BQ LCD Smart Controller shipped by
  2018. // default with the BQ Hephestos 2 and Witbox 2.
  2019. //
  2020. //#define BQ_LCD_SMART_CONTROLLER
  2021.  
  2022. //
  2023. // Cartesio UI
  2024. // http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
  2025. //
  2026. //#define CARTESIO_UI
  2027.  
  2028. //
  2029. // LCD for Melzi Card with Graphical LCD
  2030. //
  2031. //#define LCD_FOR_MELZI
  2032.  
  2033. //
  2034. // Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
  2035. // https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
  2036. //
  2037. //#define ULTI_CONTROLLER
  2038.  
  2039. //
  2040. // MKS MINI12864 with graphic controller and SD support
  2041. // https://reprap.org/wiki/MKS_MINI_12864
  2042. //
  2043. //#define MKS_MINI_12864
  2044.  
  2045. //
  2046. // MKS LCD12864A/B with graphic controller and SD support. Follows MKS_MINI_12864 pinout.
  2047. // https://www.aliexpress.com/item/33018110072.html
  2048. //
  2049. //#define MKS_LCD12864
  2050.  
  2051. //
  2052. // FYSETC variant of the MINI12864 graphic controller with SD support
  2053. // https://wiki.fysetc.com/Mini12864_Panel/
  2054. //
  2055. //#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default
  2056. //#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on)
  2057. //#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight
  2058. //#define FYSETC_MINI_12864_2_1 // Type A/B. NeoPixel RGB Backlight
  2059. //#define FYSETC_GENERIC_12864_1_1 // Larger display with basic ON/OFF backlight.
  2060.  
  2061. //
  2062. // Factory display for Creality CR-10
  2063. // https://www.aliexpress.com/item/32833148327.html
  2064. //
  2065. // This is RAMPS-compatible using a single 10-pin connector.
  2066. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
  2067. //
  2068. //#define CR10_STOCKDISPLAY
  2069.  
  2070. //
  2071. // Ender-2 OEM display, a variant of the MKS_MINI_12864
  2072. //
  2073. //#define ENDER2_STOCKDISPLAY
  2074.  
  2075. //
  2076. // ANET and Tronxy Graphical Controller
  2077. //
  2078. // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
  2079. // A clone of the RepRapDiscount full graphics display but with
  2080. // different pins/wiring (see pins_ANET_10.h).
  2081. //
  2082. //#define ANET_FULL_GRAPHICS_LCD
  2083.  
  2084. //
  2085. // AZSMZ 12864 LCD with SD
  2086. // https://www.aliexpress.com/item/32837222770.html
  2087. //
  2088. //#define AZSMZ_12864
  2089.  
  2090. //
  2091. // Silvergate GLCD controller
  2092. // https://github.com/android444/Silvergate
  2093. //
  2094. //#define SILVER_GATE_GLCD_CONTROLLER
  2095.  
  2096. //=============================================================================
  2097. //============================== OLED Displays ==============================
  2098. //=============================================================================
  2099.  
  2100. //
  2101. // SSD1306 OLED full graphics generic display
  2102. //
  2103. //#define U8GLIB_SSD1306
  2104.  
  2105. //
  2106. // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
  2107. //
  2108. //#define SAV_3DGLCD
  2109. #if ENABLED(SAV_3DGLCD)
  2110. #define U8GLIB_SSD1306
  2111. //#define U8GLIB_SH1106
  2112. #endif
  2113.  
  2114. //
  2115. // TinyBoy2 128x64 OLED / Encoder Panel
  2116. //
  2117. //#define OLED_PANEL_TINYBOY2
  2118.  
  2119. //
  2120. // MKS OLED 1.3" 128×64 FULL GRAPHICS CONTROLLER
  2121. // https://reprap.org/wiki/MKS_12864OLED
  2122. //
  2123. // Tiny, but very sharp OLED display
  2124. //
  2125. //#define MKS_12864OLED // Uses the SH1106 controller (default)
  2126. //#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller
  2127.  
  2128. //
  2129. // Zonestar OLED 128×64 FULL GRAPHICS CONTROLLER
  2130. //
  2131. //#define ZONESTAR_12864LCD // Graphical (DOGM) with ST7920 controller
  2132. //#define ZONESTAR_12864OLED // 1.3" OLED with SH1106 controller (default)
  2133. //#define ZONESTAR_12864OLED_SSD1306 // 0.96" OLED with SSD1306 controller
  2134.  
  2135. //
  2136. // Einstart S OLED SSD1306
  2137. //
  2138. //#define U8GLIB_SH1106_EINSTART
  2139.  
  2140. //
  2141. // Overlord OLED display/controller with i2c buzzer and LEDs
  2142. //
  2143. //#define OVERLORD_OLED
  2144.  
  2145. //
  2146. // FYSETC OLED 2.42" 128×64 FULL GRAPHICS CONTROLLER with WS2812 RGB
  2147. // Where to find : https://www.aliexpress.com/item/4000345255731.html
  2148. //#define FYSETC_242_OLED_12864 // Uses the SSD1309 controller
  2149.  
  2150. //=============================================================================
  2151. //========================== Extensible UI Displays ===========================
  2152. //=============================================================================
  2153.  
  2154. //
  2155. // DGUS Touch Display with DWIN OS. (Choose one.)
  2156. // ORIGIN : https://www.aliexpress.com/item/32993409517.html
  2157. // FYSETC : https://www.aliexpress.com/item/32961471929.html
  2158. //
  2159. //#define DGUS_LCD_UI_ORIGIN
  2160. //#define DGUS_LCD_UI_FYSETC
  2161. //#define DGUS_LCD_UI_HIPRECY
  2162.  
  2163. //
  2164. // Touch-screen LCD for Malyan M200/M300 printers
  2165. //
  2166. //#define MALYAN_LCD
  2167. #if ENABLED(MALYAN_LCD)
  2168. #define LCD_SERIAL_PORT 1 // Default is 1 for Malyan M200
  2169. #endif
  2170.  
  2171. //
  2172. // Touch UI for FTDI EVE (FT800/FT810) displays
  2173. // See Configuration_adv.h for all configuration options.
  2174. //
  2175. //#define TOUCH_UI_FTDI_EVE
  2176.  
  2177. //
  2178. // Touch-screen LCD for Anycubic printers
  2179. //
  2180. //#define ANYCUBIC_LCD_I3MEGA
  2181. //#define ANYCUBIC_LCD_CHIRON
  2182. #if EITHER(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON)
  2183. #define LCD_SERIAL_PORT 3 // Default is 3 for Anycubic
  2184. //#define ANYCUBIC_LCD_DEBUG
  2185. #endif
  2186.  
  2187. //
  2188. // Third-party or vendor-customized controller interfaces.
  2189. // Sources should be installed in 'src/lcd/extensible_ui'.
  2190. //
  2191. //#define EXTENSIBLE_UI
  2192.  
  2193. #if ENABLED(EXTENSIBLE_UI)
  2194. //#define EXTUI_LOCAL_BEEPER // Enables use of local Beeper pin with external display
  2195. #endif
  2196.  
  2197. //=============================================================================
  2198. //=============================== Graphical TFTs ==============================
  2199. //=============================================================================
  2200.  
  2201. //
  2202. // TFT display with optional touch screen
  2203. // Color Marlin UI with standard menu system
  2204. //
  2205. //#define TFT_320x240
  2206. //#define TFT_320x240_SPI
  2207. //#define TFT_480x320
  2208. //#define TFT_480x320_SPI
  2209.  
  2210. //
  2211. // Skip autodetect and force specific TFT driver
  2212. // Mandatory for SPI screens with no MISO line
  2213. // Available drivers are: ST7735, ST7789, ST7796, R61505, ILI9328, ILI9341, ILI9488
  2214. //
  2215. //#define TFT_DRIVER AUTO
  2216.  
  2217. //
  2218. // SPI display (MKS Robin Nano V2.0, MKS Gen L V2.0)
  2219. // Upscaled 128x64 Marlin UI
  2220. //
  2221. //#define SPI_GRAPHICAL_TFT
  2222.  
  2223. //
  2224. // FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.)
  2225. // Upscaled 128x64 Marlin UI
  2226. //
  2227. //#define FSMC_GRAPHICAL_TFT
  2228.  
  2229. //
  2230. // TFT LVGL UI
  2231. //
  2232. // Using default MKS icons and fonts from: https://git.io/JJvzK
  2233. // Just copy the 'assets' folder from the build directory to the
  2234. // root of your SD card, together with the compiled firmware.
  2235. //
  2236. //#define TFT_LVGL_UI_FSMC // Robin nano v1.2 uses FSMC
  2237. //#define TFT_LVGL_UI_SPI // Robin nano v2.0 uses SPI
  2238.  
  2239. //=============================================================================
  2240. //============================ Other Controllers ============================
  2241. //=============================================================================
  2242.  
  2243. //
  2244. // Ender-3 v2 OEM display. A DWIN display with Rotary Encoder.
  2245. //
  2246. //#define DWIN_CREALITY_LCD
  2247.  
  2248. //
  2249. // ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8
  2250. //
  2251. //#define TOUCH_SCREEN
  2252. #if ENABLED(TOUCH_SCREEN)
  2253. #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens
  2254. #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus
  2255.  
  2256. #define TOUCH_SCREEN_CALIBRATION
  2257.  
  2258. //#define XPT2046_X_CALIBRATION 12316
  2259. //#define XPT2046_Y_CALIBRATION -8981
  2260. //#define XPT2046_X_OFFSET -43
  2261. //#define XPT2046_Y_OFFSET 257
  2262. #endif
  2263.  
  2264. //
  2265. // RepRapWorld REPRAPWORLD_KEYPAD v1.1
  2266. // https://reprapworld.com/products/electronics/ramps/keypad_v1_0_fully_assembled/
  2267. //
  2268. //#define REPRAPWORLD_KEYPAD
  2269. //#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press
  2270.  
  2271. //=============================================================================
  2272. //=============================== Extra Features ==============================
  2273. //=============================================================================
  2274.  
  2275. // @section extras
  2276.  
  2277. // Set number of user-controlled fans. Disable to use all board-defined fans.
  2278. // :[1,2,3,4,5,6,7,8]
  2279. //#define NUM_M106_FANS 1
  2280.  
  2281. // Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino
  2282. //#define FAST_PWM_FAN
  2283.  
  2284. // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
  2285. // which is not as annoying as with the hardware PWM. On the other hand, if this frequency
  2286. // is too low, you should also increment SOFT_PWM_SCALE.
  2287. //#define FAN_SOFT_PWM
  2288.  
  2289. // Incrementing this by 1 will double the software PWM frequency,
  2290. // affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
  2291. // However, control resolution will be halved for each increment;
  2292. // at zero value, there are 128 effective control positions.
  2293. // :[0,1,2,3,4,5,6,7]
  2294. #define SOFT_PWM_SCALE 0
  2295.  
  2296. // If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
  2297. // be used to mitigate the associated resolution loss. If enabled,
  2298. // some of the PWM cycles are stretched so on average the desired
  2299. // duty cycle is attained.
  2300. //#define SOFT_PWM_DITHER
  2301.  
  2302. // Temperature status LEDs that display the hotend and bed temperature.
  2303. // If all hotends, bed temperature, and target temperature are under 54C
  2304. // then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
  2305. //#define TEMP_STAT_LEDS
  2306.  
  2307. // SkeinForge sends the wrong arc G-codes when using Arc Point as fillet procedure
  2308. //#define SF_ARC_FIX
  2309.  
  2310. // Support for the BariCUDA Paste Extruder
  2311. //#define BARICUDA
  2312.  
  2313. // Support for BlinkM/CyzRgb
  2314. //#define BLINKM
  2315.  
  2316. // Support for PCA9632 PWM LED driver
  2317. //#define PCA9632
  2318.  
  2319. // Support for PCA9533 PWM LED driver
  2320. //#define PCA9533
  2321.  
  2322. /**
  2323. * RGB LED / LED Strip Control
  2324. *
  2325. * Enable support for an RGB LED connected to 5V digital pins, or
  2326. * an RGB Strip connected to MOSFETs controlled by digital pins.
  2327. *
  2328. * Adds the M150 command to set the LED (or LED strip) color.
  2329. * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
  2330. * luminance values can be set from 0 to 255.
  2331. * For NeoPixel LED an overall brightness parameter is also available.
  2332. *
  2333. * *** CAUTION ***
  2334. * LED Strips require a MOSFET Chip between PWM lines and LEDs,
  2335. * as the Arduino cannot handle the current the LEDs will require.
  2336. * Failure to follow this precaution can destroy your Arduino!
  2337. * NOTE: A separate 5V power supply is required! The NeoPixel LED needs
  2338. * more current than the Arduino 5V linear regulator can produce.
  2339. * *** CAUTION ***
  2340. *
  2341. * LED Type. Enable only one of the following two options.
  2342. */
  2343. //#define RGB_LED
  2344. //#define RGBW_LED
  2345.  
  2346. #if EITHER(RGB_LED, RGBW_LED)
  2347. //#define RGB_LED_R_PIN 34
  2348. //#define RGB_LED_G_PIN 43
  2349. //#define RGB_LED_B_PIN 35
  2350. //#define RGB_LED_W_PIN -1
  2351. #endif
  2352.  
  2353. // Support for Adafruit NeoPixel LED driver
  2354. //#define NEOPIXEL_LED
  2355. #if ENABLED(NEOPIXEL_LED)
  2356. #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
  2357. #define NEOPIXEL_PIN 4 // LED driving pin
  2358. //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
  2359. //#define NEOPIXEL2_PIN 5
  2360. #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.)
  2361. #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
  2362. #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
  2363. //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
  2364.  
  2365. // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ...
  2366. //#define NEOPIXEL2_SEPARATE
  2367. #if ENABLED(NEOPIXEL2_SEPARATE)
  2368. #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip
  2369. #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255)
  2370. #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup
  2371. #else
  2372. //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel
  2373. #endif
  2374.  
  2375. // Use a single NeoPixel LED for static (background) lighting
  2376. //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use
  2377. //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W
  2378. #endif
  2379.  
  2380. /**
  2381. * Printer Event LEDs
  2382. *
  2383. * During printing, the LEDs will reflect the printer status:
  2384. *
  2385. * - Gradually change from blue to violet as the heated bed gets to target temp
  2386. * - Gradually change from violet to red as the hotend gets to temperature
  2387. * - Change to white to illuminate work surface
  2388. * - Change to green once print has finished
  2389. * - Turn off after the print has finished and the user has pushed a button
  2390. */
  2391. #if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
  2392. #define PRINTER_EVENT_LEDS
  2393. #endif
  2394.  
  2395. /**
  2396. * R/C SERVO support
  2397. * Sponsored by TrinityLabs, Reworked by codexmas
  2398. */
  2399.  
  2400. /**
  2401. * Number of servos
  2402. *
  2403. * For some servo-related options NUM_SERVOS will be set automatically.
  2404. * Set this manually if there are extra servos needing manual control.
  2405. * Leave undefined or set to 0 to entirely disable the servo subsystem.
  2406. */
  2407. //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
  2408.  
  2409. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
  2410. // 300ms is a good value but you can try less delay.
  2411. // If the servo can't reach the requested position, increase it.
  2412. #define SERVO_DELAY { 0 }
  2413.  
  2414. // Only power servos during movement, otherwise leave off to prevent jitter
  2415. //#define DEACTIVATE_SERVOS_AFTER_MOVE
  2416.  
  2417. // Allow servo angle to be edited and saved to EEPROM
  2418. //#define EDITABLE_SERVO_ANGLES
  2419.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!