Ledger Nano X - The secure hardware wallet
SHARE
TWEET

Untitled

a guest Jul 11th, 2018 205 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. dmesg -t
  2. Linux version 4.14.52-gentoo (root@vilehost) (gcc version 7.3.0 (Gentoo 7.3.0-r3 p1.4)) #1 SMP Wed Jul 11 00:21:25 EDT 2018
  3. Command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.14.52-gentoo root=UUID=859948dd-5acb-472a-b219-f3ed8b2cc064 ro
  4. KERNEL supported cpus:
  5.   Intel GenuineIntel
  6. x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
  7. x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
  8. x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
  9. x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
  10. x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
  11. e820: BIOS-provided physical RAM map:
  12. BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
  13. BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
  14. BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
  15. BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
  16. BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
  17. BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
  18. BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
  19. BIOS-e820: [mem 0x0000000040200000-0x00000000aabccfff] usable
  20. BIOS-e820: [mem 0x00000000aabcd000-0x00000000aacf3fff] reserved
  21. BIOS-e820: [mem 0x00000000aacf4000-0x00000000aacf5fff] usable
  22. BIOS-e820: [mem 0x00000000aacf6000-0x00000000aade7fff] reserved
  23. BIOS-e820: [mem 0x00000000aade8000-0x00000000aaf18fff] usable
  24. BIOS-e820: [mem 0x00000000aaf19000-0x00000000aafe7fff] ACPI NVS
  25. BIOS-e820: [mem 0x00000000aafe8000-0x00000000aaffcfff] usable
  26. BIOS-e820: [mem 0x00000000aaffd000-0x00000000aaffffff] ACPI data
  27. BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
  28. BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
  29. BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
  30. BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
  31. BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
  32. BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
  33. BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
  34. BIOS-e820: [mem 0x00000000ff980000-0x00000000ffbfffff] reserved
  35. BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
  36. BIOS-e820: [mem 0x0000000100000000-0x000000024fdfffff] usable
  37. NX (Execute Disable) protection: active
  38. SMBIOS 2.7 present.
  39. DMI: ASUSTeK Computer Inc. K53SV/K53SV, BIOS K53SV.320 11/11/2011
  40. tsc: Fast TSC calibration using PIT
  41. e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  42. e820: remove [mem 0x000a0000-0x000fffff] usable
  43. e820: last_pfn = 0x24fe00 max_arch_pfn = 0x400000000
  44. MTRR default type: uncachable
  45. MTRR fixed ranges enabled:
  46.   00000-9FFFF write-back
  47.   A0000-BFFFF uncachable
  48.   C0000-CFFFF write-protect
  49.   D0000-E7FFF uncachable
  50.   E8000-FFFFF write-protect
  51. MTRR variable ranges enabled:
  52.   0 base 000000000 mask F80000000 write-back
  53.   1 base 080000000 mask FE0000000 write-back
  54.   2 base 0A0000000 mask FF8000000 write-back
  55.   3 base 0A8000000 mask FFC000000 write-back
  56.   4 base 0AB000000 mask FFF000000 uncachable
  57.   5 base 100000000 mask F00000000 write-back
  58.   6 base 200000000 mask FC0000000 write-back
  59.   7 base 240000000 mask FF0000000 write-back
  60.   8 base 24FE00000 mask FFFE00000 uncachable
  61.   9 disabled
  62. x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
  63. e820: update [mem 0xab000000-0xffffffff] usable ==> reserved
  64. e820: last_pfn = 0xaaffd max_arch_pfn = 0x400000000
  65. found SMP MP-table at [mem 0x000fcc70-0x000fcc7f] mapped at [ffffffffff200c70]
  66. Base memory trampoline at [ffff880000098000] 98000 size 24576
  67. reserving inaccessible SNB gfx pages
  68. BRK [0x1604c0000, 0x1604c0fff] PGTABLE
  69. BRK [0x1604c1000, 0x1604c1fff] PGTABLE
  70. BRK [0x1604c2000, 0x1604c2fff] PGTABLE
  71. BRK [0x1604c3000, 0x1604c3fff] PGTABLE
  72. BRK [0x1604c4000, 0x1604c4fff] PGTABLE
  73. BRK [0x1604c5000, 0x1604c5fff] PGTABLE
  74. BRK [0x1604c6000, 0x1604c6fff] PGTABLE
  75. BRK [0x1604c7000, 0x1604c7fff] PGTABLE
  76. BRK [0x1604c8000, 0x1604c8fff] PGTABLE
  77. BRK [0x1604c9000, 0x1604c9fff] PGTABLE
  78. RAMDISK: [mem 0x36cab000-0x3764cfff]
  79. ACPI: Early table checksum verification disabled
  80. ACPI: RSDP 0x00000000000F0430 000024 (v02 _ASUS_)
  81. ACPI: XSDT 0x00000000AAFFEE18 00006C (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
  82. ACPI: FACP 0x00000000AAF9BD98 0000F4 (v04 _ASUS_ NoteBook 06222004 MSFT 00010013)
  83. ACPI: DSDT 0x00000000AAF7C018 00DC9C (v01 _ASUS_ NoteBook 00000000 INTL 20091112)
  84. ACPI: FACS 0x00000000AAFE5E40 000040
  85. ACPI: FACS 0x00000000AAFE5D40 000040
  86. ACPI: APIC 0x00000000AAFFDF18 0000CC (v02 _ASUS_ NoteBook 06222004 MSFT 00010013)
  87. ACPI: HPET 0x00000000AAFE6D18 000038 (v01 _ASUS_ NoteBook 06222004 AMI. 00000003)
  88. ACPI: ECDT 0x00000000AAFE5B18 0000C1 (v01 _ASUS_ NoteBook 06222004 AMI  00000000)
  89. ACPI: MCFG 0x00000000AAFE6C98 00003C (v01 _ASUS_ NoteBook 06222004 MSFT 00000097)
  90. ACPI: SSDT 0x00000000AAF7B018 000967 (v01 PmRef  Cpu0Ist  00003000 INTL 20091112)
  91. ACPI: SSDT 0x00000000AAF7A018 000996 (v01 PmRef  CpuPm    00003000 INTL 20091112)
  92. ACPI: SLIC 0x00000000AAF9CC18 000176 (v01 _ASUS_ Notebook 06222004 ASUS 00000001)
  93. ACPI: SSDT 0x00000000AAF5EA98 0002EF (v01 SataRe SataTabl 00001000 INTL 20091112)
  94. ACPI: Local APIC address 0xfee00000
  95. Zone ranges:
  96.   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  97.   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  98.   Normal   [mem 0x0000000100000000-0x000000024fdfffff]
  99. Movable zone start for each node
  100. Early memory node ranges
  101.   node   0: [mem 0x0000000000001000-0x000000000009dfff]
  102.   node   0: [mem 0x0000000000100000-0x000000001fffffff]
  103.   node   0: [mem 0x0000000020200000-0x000000003fffffff]
  104.   node   0: [mem 0x0000000040200000-0x00000000aabccfff]
  105.   node   0: [mem 0x00000000aacf4000-0x00000000aacf5fff]
  106.   node   0: [mem 0x00000000aade8000-0x00000000aaf18fff]
  107.   node   0: [mem 0x00000000aafe8000-0x00000000aaffcfff]
  108.   node   0: [mem 0x0000000100000000-0x000000024fdfffff]
  109. Initmem setup node 0 [mem 0x0000000000001000-0x000000024fdfffff]
  110. On node 0 totalpages: 2074290
  111.   DMA zone: 64 pages used for memmap
  112.   DMA zone: 157 pages reserved
  113.   DMA zone: 3997 pages, LIFO batch:0
  114.   DMA32 zone: 10853 pages used for memmap
  115.   DMA32 zone: 694549 pages, LIFO batch:31
  116.   Normal zone: 21496 pages used for memmap
  117.   Normal zone: 1375744 pages, LIFO batch:31
  118. kasan: KernelAddressSanitizer initialized
  119. Reserving Intel graphics memory at 0x00000000aba00000-0x00000000af9fffff
  120. ACPI: PM-Timer IO Port: 0x408
  121. ACPI: Local APIC address 0xfee00000
  122. IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  123. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  124. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  125. ACPI: IRQ0 used by override.
  126. ACPI: IRQ9 used by override.
  127. Using ACPI (MADT) for SMP configuration information
  128. ACPI: HPET id: 0x8086a701 base: 0xfed00000
  129. smpboot: Allowing 16 CPUs, 8 hotplug CPUs
  130. PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
  131. PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
  132. PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
  133. PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
  134. PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
  135. PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
  136. PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
  137. PM: Registered nosave memory: [mem 0xaabcd000-0xaacf3fff]
  138. PM: Registered nosave memory: [mem 0xaacf6000-0xaade7fff]
  139. PM: Registered nosave memory: [mem 0xaaf19000-0xaafe7fff]
  140. PM: Registered nosave memory: [mem 0xaaffd000-0xaaffffff]
  141. PM: Registered nosave memory: [mem 0xab000000-0xaf9fffff]
  142. PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
  143. PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
  144. PM: Registered nosave memory: [mem 0xe4000000-0xfebfffff]
  145. PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
  146. PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
  147. PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
  148. PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
  149. PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
  150. PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
  151. PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
  152. PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
  153. PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
  154. PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
  155. PM: Registered nosave memory: [mem 0xff980000-0xffbfffff]
  156. PM: Registered nosave memory: [mem 0xffc00000-0xffd7ffff]
  157. PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
  158. e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
  159. clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
  160. random: get_random_bytes called from start_kernel+0xcb/0x564 with crng_init=0
  161. setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
  162. percpu: Embedded 53 pages/cpu @ffff8801fba00000 s176728 r8192 d32168 u262144
  163. pcpu-alloc: s176728 r8192 d32168 u262144 alloc=1*2097152
  164. pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
  165. Built 1 zonelists, mobility grouping on.  Total pages: 2041720
  166. Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-4.14.52-gentoo root=UUID=859948dd-5acb-472a-b219-f3ed8b2cc064 ro
  167. PID hash table entries: 4096 (order: 3, 32768 bytes)
  168. Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  169. Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  170. Memory: 6788868K/8297160K available (12300K kernel code, 5143K rwdata, 5088K rodata, 1476K init, 10732K bss, 1508292K reserved, 0K cma-reserved)
  171. Kernel/User page tables isolation: enabled
  172. Hierarchical RCU implementation.
  173.         RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
  174. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
  175. NR_IRQS: 524544, nr_irqs: 552, preallocated irqs: 16
  176. Console: colour VGA+ 80x25
  177. console [tty0] enabled
  178. clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
  179. hpet clockevent registered
  180. tsc: Fast TSC calibration using PIT
  181. tsc: Detected 2195.143 MHz processor
  182. Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.28 BogoMIPS (lpj=2195143)
  183. pid_max: default: 32768 minimum: 301
  184. ACPI: Core revision 20170728
  185. random: fast init done
  186. ACPI: 4 ACPI AML tables successfully acquired and loaded
  187. Security Framework initialized
  188. SELinux:  Initializing.
  189. SELinux:  Starting in permissive mode
  190. Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
  191. Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
  192. CPU: Physical Processor ID: 0
  193. CPU: Processor Core ID: 0
  194. ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
  195. ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
  196. mce: CPU supports 9 MCE banks
  197. CPU0: Thermal monitoring enabled (TM1)
  198. process: using mwait in idle threads
  199. Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
  200. Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
  201. Spectre V2 : Mitigation: Full generic retpoline
  202. Speculative Store Bypass: Vulnerable
  203. Freeing SMP alternatives memory: 24K
  204. smpboot: Max logical packages: 4
  205. Switched APIC routing to physical flat.
  206. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  207. TSC deadline timer enabled
  208. smpboot: CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7)
  209. Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
  210. core: PEBS disabled due to CPU errata, please upgrade microcode
  211. ... version:                3
  212. ... bit width:              48
  213. ... generic registers:      4
  214. ... value mask:             0000ffffffffffff
  215. ... max period:             00007fffffffffff
  216. ... fixed-purpose events:   3
  217. ... event mask:             000000070000000f
  218. Hierarchical SRCU implementation.
  219. NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
  220. smp: Bringing up secondary CPUs ...
  221. x86: Booting SMP configuration:
  222. .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7
  223. smp: Brought up 1 node, 8 CPUs
  224. smpboot: Total of 8 processors activated (35122.28 BogoMIPS)
  225. devtmpfs: initialized
  226. x86/mm: Memory block size: 128MB
  227. PM: Registering ACPI NVS region [mem 0xaaf19000-0xaafe7fff] (847872 bytes)
  228. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  229. futex hash table entries: 4096 (order: 6, 262144 bytes)
  230. pinctrl core: initialized pinctrl subsystem
  231. NET: Registered protocol family 16
  232. cpuidle: using governor menu
  233. ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
  234. ACPI: bus type PCI registered
  235. PCI: Using configuration type 1 for base access
  236. core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
  237. mtrr: your CPUs had inconsistent variable MTRR settings
  238. mtrr: probably your BIOS does not setup all CPUs.
  239. mtrr: corrected configuration.
  240. HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  241. ACPI: Added _OSI(Module Device)
  242. ACPI: Added _OSI(Processor Device)
  243. ACPI: Added _OSI(3.0 _SCP Extensions)
  244. ACPI: Added _OSI(Processor Aggregator Device)
  245. ACPI: EC: EC started
  246. ACPI: EC: interrupt blocked
  247. ACPI: \: Used as first EC
  248. ACPI: \: GPE=0x1b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  249. ACPI: \: Used as boot ECDT EC to handle transactions
  250. ACPI: Executed 1 blocks of module-level executable AML code
  251. ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
  252. ACPI: Dynamic OEM Table Load:
  253. ACPI: SSDT 0xFFFF8801FAA23200 000694 (v01 PmRef  Cpu0Cst  00003001 INTL 20091112)
  254. ACPI: Dynamic OEM Table Load:
  255. ACPI: SSDT 0xFFFF8801FAA14DC0 000303 (v01 PmRef  ApIst    00003000 INTL 20091112)
  256. ACPI: Dynamic OEM Table Load:
  257. ACPI: SSDT 0xFFFF8801F95595C0 000119 (v01 PmRef  ApCst    00003000 INTL 20091112)
  258. ACPI: Interpreter enabled
  259. ACPI: (supports S0 S1 S3 S4 S5)
  260. ACPI: Using IOAPIC for interrupt routing
  261. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  262. ACPI: Enabled 12 GPEs in block 00 to 3F
  263. ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
  264. acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
  265. acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
  266. PCI host bridge to bus 0000:00
  267. pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
  268. pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
  269. pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  270. pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
  271. pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
  272. pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
  273. pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
  274. pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
  275. pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
  276. pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff window]
  277. pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
  278. pci_bus 0000:00: root bus resource [bus 00-3e]
  279. pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
  280. pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
  281. pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  282. pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
  283. pci 0000:00:02.0: reg 0x10: [mem 0xdc400000-0xdc7fffff 64bit]
  284. pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
  285. pci 0000:00:02.0: reg 0x20: [io  0xe000-0xe03f]
  286. pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
  287. pci 0000:00:16.0: reg 0x10: [mem 0xdf00a000-0xdf00a00f 64bit]
  288. pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
  289. pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
  290. pci 0000:00:1a.0: reg 0x10: [mem 0xdf008000-0xdf0083ff]
  291. pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
  292. pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
  293. pci 0000:00:1b.0: reg 0x10: [mem 0xdf000000-0xdf003fff 64bit]
  294. pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  295. pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
  296. pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  297. pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
  298. pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  299. pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
  300. pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
  301. pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
  302. pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
  303. pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
  304. pci 0000:00:1d.0: reg 0x10: [mem 0xdf007000-0xdf0073ff]
  305. pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  306. pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
  307. pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
  308. pci 0000:00:1f.2: reg 0x10: [io  0xe0b0-0xe0b7]
  309. pci 0000:00:1f.2: reg 0x14: [io  0xe0a0-0xe0a3]
  310. pci 0000:00:1f.2: reg 0x18: [io  0xe090-0xe097]
  311. pci 0000:00:1f.2: reg 0x1c: [io  0xe080-0xe083]
  312. pci 0000:00:1f.2: reg 0x20: [io  0xe060-0xe07f]
  313. pci 0000:00:1f.2: reg 0x24: [mem 0xdf006000-0xdf0067ff]
  314. pci 0000:00:1f.2: PME# supported from D3hot
  315. pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
  316. pci 0000:00:1f.3: reg 0x10: [mem 0xdf005000-0xdf0050ff 64bit]
  317. pci 0000:00:1f.3: reg 0x20: [io  0xe040-0xe05f]
  318. pci 0000:01:00.0: [10de:0df4] type 00 class 0x030000
  319. pci 0000:01:00.0: reg 0x10: [mem 0xdb000000-0xdbffffff]
  320. pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
  321. pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
  322. pci 0000:01:00.0: reg 0x24: [io  0xd000-0xd07f]
  323. pci 0000:01:00.0: reg 0x30: [mem 0xdc000000-0xdc07ffff pref]
  324. pci 0000:01:00.0: enabling Extended Tags
  325. pci 0000:00:01.0: PCI bridge to [bus 01]
  326. pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
  327. pci 0000:00:01.0:   bridge window [mem 0xdb000000-0xdc0fffff]
  328. pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
  329. pci 0000:00:1c.0: PCI bridge to [bus 02]
  330. pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
  331. pci 0000:00:1c.0:   bridge window [mem 0xde600000-0xdeffffff]
  332. pci 0000:00:1c.0:   bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
  333. pci 0000:03:00.0: [8086:08ae] type 00 class 0x028000
  334. pci 0000:03:00.0: reg 0x10: [mem 0xddc00000-0xddc01fff 64bit]
  335. pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
  336. pci 0000:00:1c.1: PCI bridge to [bus 03]
  337. pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
  338. pci 0000:00:1c.1:   bridge window [mem 0xddc00000-0xde5fffff]
  339. pci 0000:00:1c.1:   bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
  340. pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
  341. pci 0000:04:00.0: reg 0x10: [mem 0xdd200000-0xdd207fff 64bit]
  342. pci 0000:04:00.0: PME# supported from D3hot D3cold
  343. pci 0000:00:1c.3: PCI bridge to [bus 04]
  344. pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
  345. pci 0000:00:1c.3:   bridge window [mem 0xdd200000-0xddbfffff]
  346. pci 0000:00:1c.3:   bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
  347. pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
  348. pci 0000:05:00.0: reg 0x10: [io  0x9000-0x90ff]
  349. pci 0000:05:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
  350. pci 0000:05:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
  351. pci 0000:05:00.0: supports D1 D2
  352. pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  353. pci 0000:00:1c.5: PCI bridge to [bus 05]
  354. pci 0000:00:1c.5:   bridge window [io  0x9000-0x9fff]
  355. pci 0000:00:1c.5:   bridge window [mem 0xdc800000-0xdd1fffff]
  356. pci 0000:00:1c.5:   bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
  357. pci_bus 0000:00: on NUMA node 0
  358. ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15)
  359. ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
  360. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
  361. ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 10 11 12 14 15)
  362. ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
  363. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
  364. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 10 11 12 14 15)
  365. ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 10 11 12 14 15)
  366. ACPI: EC: interrupt unblocked
  367. ACPI: EC: event unblocked
  368. ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  369. ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
  370. pci 0000:00:02.0: vgaarb: setting as boot VGA device
  371. pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
  372. pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
  373. pci 0000:01:00.0: vgaarb: bridge control possible
  374. pci 0000:00:02.0: vgaarb: no bridge control possible
  375. vgaarb: loaded
  376. SCSI subsystem initialized
  377. libata version 3.00 loaded.
  378. ACPI: bus type USB registered
  379. usbcore: registered new interface driver usbfs
  380. usbcore: registered new interface driver hub
  381. usbcore: registered new device driver usb
  382. EDAC MC: Ver: 3.0.0
  383. PCI: Using ACPI for IRQ routing
  384. PCI: pci_cache_line_size set to 64 bytes
  385. e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
  386. e820: reserve RAM buffer [mem 0xaabcd000-0xabffffff]
  387. e820: reserve RAM buffer [mem 0xaacf6000-0xabffffff]
  388. e820: reserve RAM buffer [mem 0xaaf19000-0xabffffff]
  389. e820: reserve RAM buffer [mem 0xaaffd000-0xabffffff]
  390. e820: reserve RAM buffer [mem 0x24fe00000-0x24fffffff]
  391. NetLabel: Initializing
  392. NetLabel:  domain hash size = 128
  393. NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
  394. NetLabel:  unlabeled traffic allowed by default
  395. clocksource: Switched to clocksource hpet
  396. VFS: Disk quotas dquot_6.6.0
  397. VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  398. pnp: PnP ACPI init
  399. system 00:00: [io  0x0680-0x069f] has been reserved
  400. system 00:00: [io  0x1000-0x100f] has been reserved
  401. system 00:00: [io  0xffff] has been reserved
  402. system 00:00: [io  0xffff] has been reserved
  403. system 00:00: [io  0x0400-0x0453] has been reserved
  404. system 00:00: [io  0x0458-0x047f] has been reserved
  405. system 00:00: [io  0x0500-0x057f] has been reserved
  406. system 00:00: [io  0x164e-0x164f] has been reserved
  407. system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  408. pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
  409. system 00:02: [io  0x0454-0x0457] has been reserved
  410. system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
  411. pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
  412. pnp 00:04: Plug and Play ACPI device, IDs SYN0a17 SYN0a00 SYN0002 PNP0f13 (active)
  413. system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
  414. system 00:05: [mem 0xfed10000-0xfed17fff] could not be reserved
  415. system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
  416. system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
  417. system 00:05: [mem 0xe0000000-0xe3ffffff] has been reserved
  418. system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
  419. system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
  420. system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
  421. system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
  422. system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
  423. system 00:05: [mem 0xafa00000-0xafa00fff] has been reserved
  424. system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
  425. system 00:06: [mem 0xafa00000-0xafa00fff] has been reserved
  426. system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
  427. system 00:07: [mem 0x20000000-0x201fffff] has been reserved
  428. system 00:07: [mem 0x40000000-0x401fffff] has been reserved
  429. system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
  430. pnp: PnP ACPI: found 8 devices
  431. clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  432. pci 0000:00:01.0: PCI bridge to [bus 01]
  433. pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
  434. pci 0000:00:01.0:   bridge window [mem 0xdb000000-0xdc0fffff]
  435. pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
  436. pci 0000:00:1c.0: PCI bridge to [bus 02]
  437. pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
  438. pci 0000:00:1c.0:   bridge window [mem 0xde600000-0xdeffffff]
  439. pci 0000:00:1c.0:   bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
  440. pci 0000:00:1c.1: PCI bridge to [bus 03]
  441. pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
  442. pci 0000:00:1c.1:   bridge window [mem 0xddc00000-0xde5fffff]
  443. pci 0000:00:1c.1:   bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
  444. pci 0000:00:1c.3: PCI bridge to [bus 04]
  445. pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
  446. pci 0000:00:1c.3:   bridge window [mem 0xdd200000-0xddbfffff]
  447. pci 0000:00:1c.3:   bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
  448. pci 0000:00:1c.5: PCI bridge to [bus 05]
  449. pci 0000:00:1c.5:   bridge window [io  0x9000-0x9fff]
  450. pci 0000:00:1c.5:   bridge window [mem 0xdc800000-0xdd1fffff]
  451. pci 0000:00:1c.5:   bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
  452. pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
  453. pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
  454. pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
  455. pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
  456. pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
  457. pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
  458. pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
  459. pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
  460. pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
  461. pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff window]
  462. pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff window]
  463. pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
  464. pci_bus 0000:01: resource 1 [mem 0xdb000000-0xdc0fffff]
  465. pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
  466. pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
  467. pci_bus 0000:02: resource 1 [mem 0xde600000-0xdeffffff]
  468. pci_bus 0000:02: resource 2 [mem 0xd4200000-0xd4bfffff 64bit pref]
  469. pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
  470. pci_bus 0000:03: resource 1 [mem 0xddc00000-0xde5fffff]
  471. pci_bus 0000:03: resource 2 [mem 0xd3700000-0xd40fffff 64bit pref]
  472. pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
  473. pci_bus 0000:04: resource 1 [mem 0xdd200000-0xddbfffff]
  474. pci_bus 0000:04: resource 2 [mem 0xd2c00000-0xd35fffff 64bit pref]
  475. pci_bus 0000:05: resource 0 [io  0x9000-0x9fff]
  476. pci_bus 0000:05: resource 1 [mem 0xdc800000-0xdd1fffff]
  477. pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
  478. NET: Registered protocol family 2
  479. TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  480. TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  481. TCP: Hash tables configured (established 65536 bind 65536)
  482. UDP hash table entries: 4096 (order: 5, 131072 bytes)
  483. UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  484. NET: Registered protocol family 1
  485. pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  486. PCI: CLS 64 bytes, default 64
  487. Trying to unpack rootfs image as initramfs...
  488. Freeing initrd memory: 9864K
  489. PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  490. software IO TLB [mem 0xa6bcd000-0xaabcd000] (64MB) mapped at [ffff8800a6bcd000-ffff8800aabccfff]
  491. RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
  492. RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
  493. RAPL PMU: hw unit of domain package 2^-16 Joules
  494. RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
  495. audit: initializing netlink subsys (disabled)
  496. audit: type=2000 audit(1531322724.640:1): state=initialized audit_enabled=0 res=1
  497. Initialise system trusted keyrings
  498. workingset: timestamp_bits=46 max_order=21 bucket_order=0
  499. SELinux:  Registering netfilter hooks
  500. NET: Registered protocol family 38
  501. Key type asymmetric registered
  502. Asymmetric key parser 'x509' registered
  503. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  504. io scheduler noop registered
  505. io scheduler deadline registered
  506. io scheduler cfq registered (default)
  507. io scheduler mq-deadline registered
  508. io scheduler kyber registered
  509. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  510. Linux agpgart interface v0.103
  511. intel_idle: MWAIT substates: 0x21120
  512. intel_idle: v0.4.1 model 0x2A
  513. intel_idle: lapic_timer_reliable_states 0xffffffff
  514. ipmi message handler version 39.2
  515. IPMI System Interface driver.
  516. ipmi_si: Unable to find any System Interface(s)
  517. ACPI: AC Adapter [AC0] (on-line)
  518. input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
  519. ACPI: Lid Switch [LID]
  520. input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
  521. ACPI: Sleep Button [SLPB]
  522. input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  523. ACPI: Power Button [PWRF]
  524. (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  525. thermal LNXTHERM:00: registered as thermal_zone0
  526. ACPI: Thermal Zone [TZ00] (60 C)
  527. ACPI: Battery Slot [BAT0] (battery present)
  528. brd: module loaded
  529. loop: module loaded
  530. libphy: Fixed MDIO Bus: probed
  531. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  532. ehci-pci: EHCI PCI platform driver
  533. ehci-pci 0000:00:1a.0: EHCI Host Controller
  534. ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
  535. ehci-pci 0000:00:1a.0: debug port 2
  536. ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
  537. ehci-pci 0000:00:1a.0: irq 16, io mem 0xdf008000
  538. ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  539. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  540. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  541. usb usb1: Product: EHCI Host Controller
  542. usb usb1: Manufacturer: Linux 4.14.52-gentoo ehci_hcd
  543. usb usb1: SerialNumber: 0000:00:1a.0
  544. hub 1-0:1.0: USB hub found
  545. hub 1-0:1.0: 2 ports detected
  546. ehci-pci 0000:00:1d.0: EHCI Host Controller
  547. ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
  548. ehci-pci 0000:00:1d.0: debug port 2
  549. ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
  550. ehci-pci 0000:00:1d.0: irq 23, io mem 0xdf007000
  551. ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  552. usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  553. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  554. usb usb2: Product: EHCI Host Controller
  555. usb usb2: Manufacturer: Linux 4.14.52-gentoo ehci_hcd
  556. usb usb2: SerialNumber: 0000:00:1d.0
  557. hub 2-0:1.0: USB hub found
  558. hub 2-0:1.0: 2 ports detected
  559. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  560. ohci-pci: OHCI PCI platform driver
  561. uhci_hcd: USB Universal Host Controller Interface driver
  562. i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  563. i8042: Detected active multiplexing controller, rev 1.1
  564. serio: i8042 KBD port at 0x60,0x64 irq 1
  565. serio: i8042 AUX0 port at 0x60,0x64 irq 12
  566. serio: i8042 AUX1 port at 0x60,0x64 irq 12
  567. serio: i8042 AUX2 port at 0x60,0x64 irq 12
  568. serio: i8042 AUX3 port at 0x60,0x64 irq 12
  569. mousedev: PS/2 mouse device common for all mice
  570. rtc_cmos 00:01: RTC can wake from S4
  571. rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
  572. rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
  573. intel_pstate: Intel P-state driver initializing
  574. hidraw: raw HID events driver (C) Jiri Kosina
  575. usbcore: registered new interface driver usbhid
  576. usbhid: USB HID core driver
  577. drop_monitor: Initializing network drop monitor service
  578. Initializing XFRM netlink socket
  579. NET: Registered protocol family 17
  580. microcode: sig=0x206a7, pf=0x10, revision=0x1b
  581. microcode: Microcode Update Driver: v2.2.
  582. sched_clock: Marking stable (5932499648, 0)->(5983426524, -50926876)
  583. registered taskstats version 1
  584. Loading compiled-in X.509 certificates
  585. input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  586. Loaded X.509 cert 'Build time autogenerated kernel key: 7c0d81ccff4d536ce4ff5910e501cee6a3126031'
  587. ima: No TPM chip found, activating TPM-bypass! (rc=-19)
  588. ima: Allocated hash algorithm: sha1
  589. rtc_cmos 00:01: setting system clock to 2018-07-11 15:25:25 UTC (1531322725)
  590. Freeing unused kernel memory: 1476K
  591. Write protecting the kernel read-only data: 20480k
  592. Freeing unused kernel memory: 2012K
  593. Freeing unused kernel memory: 1056K
  594. usb 1-1: new high-speed USB device number 2 using ehci-pci
  595. usb 2-1: new high-speed USB device number 2 using ehci-pci
  596. usb 1-1: New USB device found, idVendor=8087, idProduct=0024
  597. usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  598. hub 1-1:1.0: USB hub found
  599. hub 1-1:1.0: 6 ports detected
  600. usb 2-1: New USB device found, idVendor=8087, idProduct=0024
  601. usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  602. hub 2-1:1.0: USB hub found
  603. hub 2-1:1.0: 6 ports detected
  604. usb 1-1.4: new high-speed USB device number 3 using ehci-pci
  605. usb 2-1-port3: over-current condition
  606. tsc: Refined TSC clocksource calibration: 2195.013 MHz
  607. clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
  608. usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0139
  609. usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  610. usb 1-1.4: Product: USB2.0-CRW
  611. usb 1-1.4: Manufacturer: Generic
  612. usb 1-1.4: SerialNumber: 20100201396000000
  613. psmouse serio4: synaptics: queried max coordinates: x [..5762], y [..4902]
  614. psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1704, fw id: 705499
  615. input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
  616. usb 2-1-port4: over-current condition
  617. clocksource: Switched to clocksource tsc
  618. ahci 0000:00:1f.2: version 3.0
  619. ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
  620. ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
  621. scsi host0: ahci
  622. scsi host1: ahci
  623. scsi host2: ahci
  624. scsi host3: ahci
  625. scsi host4: ahci
  626. scsi host5: ahci
  627. ata1: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006100 irq 24
  628. ata2: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006180 irq 24
  629. ata3: DUMMY
  630. ata4: DUMMY
  631. ata5: DUMMY
  632. ata6: DUMMY
  633. ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  634. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  635. ata2.00: ATAPI: MATSHITADVD-RAM UJ8B0, 1.00, max UDMA/100
  636. ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
  637. ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
  638. ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
  639. ata1.00: ATA-8: Hitachi HTS547564A9E384, JEDOA60A, max UDMA/133
  640. ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  641. ata2.00: configured for UDMA/100
  642. ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
  643. ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
  644. ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
  645. ata1.00: configured for UDMA/133
  646. scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54756 A60A PQ: 0 ANSI: 5
  647. scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8B0    1.00 PQ: 0 ANSI: 5
  648. sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
  649. sd 0:0:0:0: [sda] 4096-byte physical blocks
  650. sd 0:0:0:0: [sda] Write Protect is off
  651. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  652. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  653.  sda: sda1 sda2 sda3
  654. sd 0:0:0:0: [sda] Attached SCSI disk
  655. sd 0:0:0:0: Attached scsi generic sg0 type 0
  656. scsi 1:0:0:0: Attached scsi generic sg1 type 5
  657. sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  658. cdrom: Uniform CD-ROM driver Revision: 3.20
  659. sr 1:0:0:0: Attached scsi CD-ROM sr0
  660. imm: Version 2.05 (for Linux 2.4.0)
  661. Fusion MPT base driver 3.04.20
  662. Copyright (c) 1999-2008 LSI Corporation
  663. Fusion MPT SPI Host driver 3.04.20
  664. Fusion MPT FC Host driver 3.04.20
  665. Fusion MPT SAS Host driver 3.04.20
  666. LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
  667. 3ware Storage Controller device driver for Linux v1.26.02.003.
  668. 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
  669. Adaptec aacraid driver 1.2.1[50834]-custom
  670. megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
  671. megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
  672. megasas: 07.702.06.00-rc1
  673. qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.01-k.
  674. Emulex LightPulse Fibre Channel SCSI driver 11.4.0.3
  675. Copyright (C) 2017 Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries.
  676. aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
  677. mpt3sas version 15.100.00.00 loaded
  678. usbcore: registered new interface driver usb-storage
  679. xhci_hcd 0000:04:00.0: xHCI Host Controller
  680. xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
  681. xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
  682. usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  683. usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  684. usb usb3: Product: xHCI Host Controller
  685. usb usb3: Manufacturer: Linux 4.14.52-gentoo xhci-hcd
  686. usb usb3: SerialNumber: 0000:04:00.0
  687. hub 3-0:1.0: USB hub found
  688. hub 3-0:1.0: 2 ports detected
  689. xhci_hcd 0000:04:00.0: xHCI Host Controller
  690. xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
  691. xhci_hcd 0000:04:00.0: Host supports USB 3.0  SuperSpeed
  692. usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  693. usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  694. usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  695. usb usb4: Product: xHCI Host Controller
  696. usb usb4: Manufacturer: Linux 4.14.52-gentoo xhci-hcd
  697. usb usb4: SerialNumber: 0000:04:00.0
  698. hub 4-0:1.0: USB hub found
  699. hub 4-0:1.0: 2 ports detected
  700. usb 3-1: new full-speed USB device number 2 using xhci_hcd
  701. device-mapper: uevent: version 1.0.3
  702. device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
  703. usb 3-1: New USB device found, idVendor=0451, idProduct=2046
  704. usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  705. hub 3-1:1.0: USB hub found
  706. hub 3-1:1.0: 4 ports detected
  707. xor: automatically using best checksumming function   avx      
  708. async_tx: api initialized (async)
  709. device-mapper: dm-log-userspace: version 1.3.0 loaded
  710. raid6: sse2x1   gen()  3984 MB/s
  711. raid6: sse2x1   xor()  3218 MB/s
  712. raid6: sse2x2   gen()  7039 MB/s
  713. raid6: sse2x2   xor()  4669 MB/s
  714. raid6: sse2x4   gen()  9269 MB/s
  715. usb 3-1.1: new low-speed USB device number 3 using xhci_hcd
  716. raid6: sse2x4   xor()  6490 MB/s
  717. raid6: using algorithm sse2x4 gen() 9269 MB/s
  718. raid6: .... xor() 6490 MB/s, rmw enabled
  719. raid6: using ssse3x2 recovery algorithm
  720. device-mapper: raid: Loading target version 1.13.0
  721. usb 3-1.1: New USB device found, idVendor=04a5, idProduct=7008
  722. usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  723. usb 3-1.1: Product: USB MULTIMEDIA KEYBOARD
  724. usb 3-1.1: Manufacturer: NOVATEK
  725. input: NOVATEK USB MULTIMEDIA KEYBOARD as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:04A5:7008.0001/input/input12
  726. hid-generic 0003:04A5:7008.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB MULTIMEDIA KEYBOARD] on usb-0000:04:00.0-1.1/input0
  727. input: NOVATEK USB MULTIMEDIA KEYBOARD as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:04A5:7008.0002/input/input13
  728. hid-generic 0003:04A5:7008.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK USB MULTIMEDIA KEYBOARD] on usb-0000:04:00.0-1.1/input1
  729. usb 3-1.2: new low-speed USB device number 4 using xhci_hcd
  730. usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
  731. usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  732. usb 3-1.2: Product: Usb Mouse
  733. usb 3-1.2: Manufacturer: SIGMACHIP
  734. input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.0003/input/input14
  735. hid-generic 0003:1C4F:0048.0003: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
  736. usb 3-1.3: new low-speed USB device number 5 using xhci_hcd
  737. usb 3-1.3: New USB device found, idVendor=040b, idProduct=2014
  738. usb 3-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  739. usb 3-1.3: Product: 2.4GHz keyboard and mouse
  740. input: 2.4GHz keyboard and mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:040B:2014.0004/input/input15
  741. hid-generic 0003:040B:2014.0004: input,hidraw3: USB HID v1.10 Keyboard [2.4GHz keyboard and mouse] on usb-0000:04:00.0-1.3/input0
  742. input: 2.4GHz keyboard and mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:040B:2014.0005/input/input16
  743. hid-generic 0003:040B:2014.0005: input,hiddev96,hidraw4: USB HID v1.10 Mouse [2.4GHz keyboard and mouse] on usb-0000:04:00.0-1.3/input1
  744. Btrfs loaded, crc32c=crc32c-generic
  745. JFS: nTxBlock = 8192, nTxLock = 65536
  746. FS-Cache: Loaded
  747. RPC: Registered named UNIX socket transport module.
  748. RPC: Registered udp transport module.
  749. RPC: Registered tcp transport module.
  750. RPC: Registered tcp NFSv4.1 backchannel transport module.
  751. FS-Cache: Netfs 'nfs' registered for caching
  752. SGI XFS with ACLs, security attributes, realtime, no debug enabled
  753. fuse init (API version 7.26)
  754. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  755. e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  756. e1000: Copyright (c) 1999-2006 Intel Corporation.
  757. dca service started, version 1.12.1
  758. pps_core: LinuxPPS API ver. 1 registered
  759. pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  760. PTP clock support registered
  761. igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  762. igb: Copyright (c) 2007-2014 Intel Corporation.
  763. pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
  764. r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  765. r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
  766. r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc90000072000, 54:04:a6:25:08:10, XID 0c200000 IRQ 33
  767. r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
  768. sky2: driver version 1.30
  769. VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
  770. Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
  771. vxge: Copyright(c) 2002-2010 Exar Corp.
  772. vxge: Driver version: 2.5.3.22640-k
  773. tulip: Linux Tulip driver version 1.1.15 (Feb 27, 2007)
  774. ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
  775. ixgbe: Copyright (c) 1999-2016 Intel Corporation.
  776. ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
  777. ixgb: Copyright (c) 1999-2008 Intel Corporation.
  778. EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (2c0)
  779. EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
  780. random: crng init done
  781. udevd[3201]: starting version 3.2.5
  782. udevd[3202]: starting eudev-3.2.5
  783. r8169 0000:05:00.0 enp5s0: renamed from eth0
  784. input: PC Speaker as /devices/platform/pcspkr/input/input17
  785. ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
  786. ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  787. ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\SBGP) (20170728/utaddress-247)
  788. ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
  789. ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  790. ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\SBGP) (20170728/utaddress-247)
  791. ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
  792. ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  793. ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\SBGP) (20170728/utaddress-247)
  794. ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
  795. ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  796. lpc_ich: Resource conflict(s) found affecting gpio_ich
  797. iTCO_vendor_support: vendor-support=0
  798. nvidia: disagrees about version of symbol module_layout
  799. iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
  800. iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
  801. iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  802. [drm] Memory usable by graphics device = 2048M
  803. [drm] Replacing VGA console driver
  804. Console: switching to colour dummy device 80x25
  805. [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  806. [drm] Driver supports precise vblank timestamp query.
  807. i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
  808. [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
  809. Error: Driver 'pcspkr' is already registered, aborting...
  810. ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
  811. Intel(R) Wireless WiFi driver for Linux
  812. Copyright(c) 2003- 2015 Intel Corporation
  813. iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
  814. Error: Driver 'pcspkr' is already registered, aborting...
  815. acpi device:50: registered as cooling_device8
  816. input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4c/LNXVIDEO:00/input/input18
  817. ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
  818. iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 32895 op_mode iwldvm
  819. acpi device:52: registered as cooling_device9
  820. input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input19
  821. fbcon: inteldrmfb (fb0) is primary device
  822. Console: switching to colour frame buffer device 170x48
  823. i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  824. iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
  825. iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
  826. iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
  827. iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 100 BGN, REV=0x6C
  828. ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
  829. snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
  830. iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
  831. snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
  832. snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  833. snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
  834. snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
  835. snd_hda_codec_realtek hdaudioC0D0:    inputs:
  836. snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
  837. snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
  838. EXT4-fs (sda3): re-mounted. Opts: (null)
  839. input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
  840. input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
  841. input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
  842. Adding 6191100k swap on /dev/sda2.  Priority:-2 extents:1 across:6191100k
  843. EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
  844. EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  845. 8021q: 802.1Q VLAN Support v1.8
  846. r8169 0000:05:00.0 enp5s0: link down
  847. 8021q: adding VLAN 0 to HW filter on device bond0
  848. iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
  849. iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
  850. usb 3-1.2: USB disconnect, device number 4
  851. ==================================================================
  852. BUG: KASAN: use-after-free in xhci_free_virt_device.part.21+0x1bd/0x280 [xhci_hcd]
  853. Read of size 4 at addr ffff8801edece5d0 by task swapper/0/0
  854.  
  855. CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.52-gentoo #1
  856. Hardware name: ASUSTeK Computer Inc. K53SV/K53SV, BIOS K53SV.320 11/11/2011
  857. Call Trace:
  858.  <IRQ>
  859.  dump_stack+0x67/0x9b
  860.  print_address_description+0x6a/0x250
  861.  ? xhci_free_virt_device.part.21+0x1bd/0x280 [xhci_hcd]
  862.  kasan_report+0x23f/0x350
  863.  xhci_free_virt_device.part.21+0x1bd/0x280 [xhci_hcd]
  864.  handle_cmd_completion+0xd5e/0x1b70 [xhci_hcd]
  865.  ? xhci_queue_new_dequeue_state+0x350/0x350 [xhci_hcd]
  866.  ? update_curr+0x194/0x2a0
  867.  ? cpu_load_update+0x79/0x270
  868.  xhci_irq+0x4f5/0xf80 [xhci_hcd]
  869.  ? add_interrupt_randomness+0x1b7/0x340
  870.  ? add_disk_randomness+0xe0/0xe0
  871.  ? xhci_irq+0xf80/0xf80 [xhci_hcd]
  872.  __handle_irq_event_percpu+0x69/0x260
  873.  handle_irq_event_percpu+0x66/0xd0
  874.  ? __handle_irq_event_percpu+0x260/0x260
  875.  ? ktime_get+0x4f/0xb0
  876.  ? lapic_next_deadline+0x5/0x40
  877.  handle_irq_event+0x5b/0x90
  878.  handle_edge_irq+0x157/0x2e0
  879.  handle_irq+0x2c/0x40
  880.  do_IRQ+0x4a/0xf0
  881.  common_interrupt+0x84/0x84
  882.  </IRQ>
  883. RIP: 0010:cpuidle_enter_state+0xd3/0x3d0
  884. RSP: 0018:ffffffffa5807d98 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff4e
  885. RAX: 0000000000000000 RBX: ffffe8ffffa12c80 RCX: ffffffffa44e9b85
  886. RDX: dffffc0000000000 RSI: fffffff7e9c7bf13 RDI: ffff8801fba2abe8
  887. RBP: 00000000000040b1 R08: fffffbfff4b9f9b0 R09: fffffbfff4b9f9b0
  888. R10: ffffffffa5807d60 R11: fffffbfff4b9f9af R12: 0000000000000003
  889. R13: ffffffffa5b08fd8 R14: 0000000000000000 R15: 000000092b5fa3f6
  890.  ? sched_idle_set_state+0x25/0x30
  891.  ? cpuidle_enter_state+0xcf/0x3d0
  892.  ? tsc_verify_tsc_adjust+0x30/0x160
  893.  do_idle+0x1aa/0x1f0
  894.  cpu_startup_entry+0xb9/0xc0
  895.  ? cpu_in_idle+0x20/0x20
  896.  ? schedule+0x50/0xc0
  897.  start_kernel+0x53f/0x564
  898.  ? mem_encrypt_init+0x6/0x6
  899.  ? load_ucode_intel_bsp+0x56/0x8e
  900.  ? load_ucode_intel_bsp+0x56/0x8e
  901.  ? init_intel_microcode+0xa7/0xa7
  902.  ? load_ucode_bsp+0xcc/0x154
  903.  secondary_startup_64+0xa5/0xb0
  904.  
  905. Allocated by task 63:
  906.  kasan_kmalloc+0xe4/0x170
  907.  kmem_cache_alloc_trace+0xcd/0x1d0
  908.  usb_alloc_dev+0x3e/0x540
  909.  hub_port_connect+0x31a/0x1040
  910.  port_event+0x7a3/0x940
  911.  hub_event+0x4a6/0x570
  912.  process_one_work+0x3e4/0x700
  913.  worker_thread+0x86/0x7c0
  914.  kthread+0x1af/0x1d0
  915.  ret_from_fork+0x3a/0x50
  916.  
  917. Freed by task 92:
  918.  kasan_slab_free+0xab/0x1a0
  919.  kfree+0x77/0x110
  920.  device_release+0x47/0xe0
  921.  kobject_put+0xbe/0x220
  922.  hub_port_connect+0x139/0x1040
  923.  port_event+0x7a3/0x940
  924.  hub_event+0x4a6/0x570
  925.  process_one_work+0x3e4/0x700
  926.  worker_thread+0x86/0x7c0
  927.  kthread+0x1af/0x1d0
  928.  ret_from_fork+0x3a/0x50
  929.  
  930. The buggy address belongs to the object at ffff8801edece0c0
  931.  which belongs to the cache kmalloc-2048 of size 2048
  932. The buggy address is located 1296 bytes inside of
  933.  2048-byte region [ffff8801edece0c0, ffff8801edece8c0)
  934. The buggy address belongs to the page:
  935. page:ffffea0007b7b380 count:1 mapcount:0 mapping:ffff8801edece0c0 index:0x0 compound_mapcount: 0
  936. flags: 0x8000000000008100(slab|head)
  937. raw: 8000000000008100 ffff8801edece0c0 0000000000000000 0000000100000003
  938. raw: ffffea0007b74820 ffffea0007b7c9a0 ffff8801fa800a40 0000000000000000
  939. page dumped because: kasan: bad access detected
  940.  
  941. Memory state around the buggy address:
  942.  ffff8801edece480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  943.  ffff8801edece500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  944. >ffff8801edece580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  945.                                                  ^
  946.  ffff8801edece600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  947.  ffff8801edece680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  948. ==================================================================
  949. Disabling lock debugging due to kernel taint
  950. usb 3-1.2: new low-speed USB device number 6 using xhci_hcd
  951. usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
  952. usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  953. usb 3-1.2: Product: Usb Mouse
  954. usb 3-1.2: Manufacturer: SIGMACHIP
  955. input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.0006/input/input23
  956. hid-generic 0003:1C4F:0048.0006: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
  957. usb 3-1.2: USB disconnect, device number 6
  958. usb 3-1.2: new low-speed USB device number 7 using xhci_hcd
  959. usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
  960. usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  961. usb 3-1.2: Product: Usb Mouse
  962. usb 3-1.2: Manufacturer: SIGMACHIP
  963. input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.0007/input/input24
  964. hid-generic 0003:1C4F:0048.0007: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
  965. usb 3-1.2: USB disconnect, device number 7
  966. usb 3-1.2: new low-speed USB device number 8 using xhci_hcd
  967. usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
  968. usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  969. usb 3-1.2: Product: Usb Mouse
  970. usb 3-1.2: Manufacturer: SIGMACHIP
  971. input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.0008/input/input25
  972. hid-generic 0003:1C4F:0048.0008: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
  973. usb 3-1.2: USB disconnect, device number 8
  974. usb 3-1.2: new low-speed USB device number 9 using xhci_hcd
  975. usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
  976. usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  977. usb 3-1.2: Product: Usb Mouse
  978. usb 3-1.2: Manufacturer: SIGMACHIP
  979. input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.0009/input/input26
  980. hid-generic 0003:1C4F:0048.0009: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
  981. usb 3-1.2: USB disconnect, device number 9
  982. usb 3-1.2: new low-speed USB device number 10 using xhci_hcd
  983. usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
  984. usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  985. usb 3-1.2: Product: Usb Mouse
  986. usb 3-1.2: Manufacturer: SIGMACHIP
  987. input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.000A/input/input27
  988. hid-generic 0003:1C4F:0048.000A: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
  989. usb 3-1.2: USB disconnect, device number 10
  990. usb 3-1.2: new low-speed USB device number 11 using xhci_hcd
  991. usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
  992. usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  993. usb 3-1.2: Product: Usb Mouse
  994. usb 3-1.2: Manufacturer: SIGMACHIP
  995. input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.000B/input/input28
  996. hid-generic 0003:1C4F:0048.000B: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
  997. usb 3-1.2: USB disconnect, device number 11
  998. usb 3-1.2: new low-speed USB device number 12 using xhci_hcd
  999. usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
  1000. usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1001. usb 3-1.2: Product: Usb Mouse
  1002. usb 3-1.2: Manufacturer: SIGMACHIP
  1003. input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.000C/input/input29
  1004. hid-generic 0003:1C4F:0048.000C: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
  1005. usb 3-1.2: USB disconnect, device number 12
  1006. usb 3-1.2: new low-speed USB device number 13 using xhci_hcd
  1007. usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
  1008. usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1009. usb 3-1.2: Product: Usb Mouse
  1010. usb 3-1.2: Manufacturer: SIGMACHIP
  1011. input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.000D/input/input30
  1012. hid-generic 0003:1C4F:0048.000D: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
  1013. usb 3-1.2: USB disconnect, device number 13
  1014. usb 3-1.2: new low-speed USB device number 14 using xhci_hcd
  1015. usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0048
  1016. usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1017. usb 3-1.2: Product: Usb Mouse
  1018. usb 3-1.2: Manufacturer: SIGMACHIP
  1019. input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0048.000E/input/input31
  1020. hid-generic 0003:1C4F:0048.000E: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:04:00.0-1.2/input0
  1021. nvidia: disagrees about version of symbol module_layout
  1022. NET: Registered protocol family 10
  1023. IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
  1024. IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
  1025. IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
  1026. Segment Routing with IPv6
  1027. IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
  1028. IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
  1029. iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
  1030. iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
  1031. IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
  1032. IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
  1033. iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
  1034. iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
  1035. IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
  1036. wlp3s0: authenticate with f8:2c:18:e6:13:0a
  1037. wlp3s0: send auth to f8:2c:18:e6:13:0a (try 1/3)
  1038. wlp3s0: authenticated
  1039. wlp3s0: associate with f8:2c:18:e6:13:0a (try 1/3)
  1040. wlp3s0: RX AssocResp from f8:2c:18:e6:13:0a (capab=0x411 status=0 aid=2)
  1041. wlp3s0: associated
  1042. IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top