Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- himci: card connected!
- mmc1: new high speed SDHC card at address 1234
- mmcblk0: mmc1:1234 SA08G 7.42 GiB
- mmcblk0: p1
- System startup
- =========1
- hello, open console
- do_auto_sd_update: detect flash size: 0x1000000, gsdexist=1
- Interface: MMC
- Device 0: Vendor: Man 02544d Snr 9c000161 Rev: 0.4 Prod: SA08G
- Type: Removable Hard Disk
- Capacity: 7604.0 MB = 7.4 GB (15572992 x 512)
- Partition 1: Filesystem: FAT32 "NO NAME "
- system volume information/
- bin/
- v3 recovery/
- v4 0.1.0/
- latest website/
- v4 0.0.3/
- 908784 rootfs_y20
- 7194240 home_y20
- 2 file(s), 6 dir(s)
- 1: rootfs_y20!
- find index 4: rootfs_y20
- 2: home_y20!
- find index 5: home_y20
- u-boot_y20 not found!
- env_y20 not found!
- conf_y20 not found!
- kernel_y20 not found!
- reading rootfs_y20
- magic 0x27051956 0x27051956
- arch 0x2 0x2
- size 0xdddb0 0x40
- type 0x7 0x2
- crc 0xa9971e74
- name 0001-hi3518-rootfs
- idx4: old : 5c9288e9, new : 58f752bd
- reading rootfs_y20
- update finished, calc crc star...
- Erase env area success!
- reading home_y20
- magic 0x27051956 0x27051956
- arch 0x2 0x2
- size 0x6dc640 0x40
- type 0x7 0x2
- crc 0x3e6df0f1
- name 0001-hi3518-home
- idx5: old : 5c9288e8, new : 58f752ce
- reading home_y20
- update finished, calc crc star...
- Erase env area success!
- do_auto_update: detect flash size: 0x1000000
- ### UBOOT:test pin high! ###
- Hit any key to stop autoboot: 0 0
- 16384 KiB hi_fmc at 0:0 is now current device
- ## Booting kernel from Legacy Image at 82000000 ...
- Image Name: 7518-hi3518c-kernel
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 1384232 Bytes = 1.3 MiB
- Load Address: 80008000
- Entry Point: 80008000
- Loading Kernel Image ... OK
- OK
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- Booting Linux on physical CPU 0
- Linux version 3.4.35 (chenshibo@ANTS-SH-SV02) (gcc version 4.8.3 20131202 (prerelease) (Hisilicon_v300) ) #22 Mon Nov 28 15:39:11 CST 2016
- CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
- CPU: VIVT data cache, VIVT instruction cache
- Machine: hi3518ev200
- Memory policy: ECC disabled, Data cache writeback
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8636
- Kernel command line: mem=34M console=ttyAMA0,115200 root=/dev/mtdblock4 rootfstype=jffs2 mtdparts=hi_sfc:256k(boot)ro,64k(env),64k(conf),1600k(os),1280k(rootfs),12992k(home),64k(vd1),64k(ver)!!!
- PID hash table entries: 256 (order: -2, 1024 bytes)
- Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- Memory: 34MB = 34MB total
- Memory: 30648k/30648k available, 4168k reserved, 0K highmem
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- vmalloc : 0xc2800000 - 0xff000000 ( 968 MB)
- lowmem : 0xc0000000 - 0xc2200000 ( 34 MB)
- modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- .text : 0xc0008000 - 0xc0340000 (3296 kB)
- .init : 0xc0340000 - 0xc035cc64 ( 116 kB)
- .data : 0xc035e000 - 0xc037f260 ( 133 kB)
- .bss : 0xc037f284 - 0xc03b1850 ( 202 kB)
- SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- NR_IRQS:32
- VIC @fe0d0000: id 0x00641190, vendor 0x41
- sched_clock: 32 bits at 49MHz, resolution 20ns, wraps every 86767ms
- Console: colour dummy device 80x30
- Calibrating delay loop... 269.10 BogoMIPS (lpj=1345536)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 512
- Initializing cgroup subsys freezer
- CPU: Testing write buffer coherency: ok
- Setting up static identity map for 0x8026ab08 - 0x8026ab60
- dummy:
- NET: Registered protocol family 16
- Serial: AMBA PL011 UART driver
- uart:0: ttyAMA0 at MMIO 0x20080000 (irq = 5) is a PL011 rev2
- console [ttyAMA0] enabled
- uart:1: ttyAMA1 at MMIO 0x20090000 (irq = 30) is a PL011 rev2
- uart:2: ttyAMA2 at MMIO 0x200a0000 (irq = 25) is a PL011 rev2
- bio: create slab <bio-0> at 0
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- Switching to clocksource timer0
- NET: Registered protocol family 2
- IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- TCP established hash table entries: 2048 (order: 2, 16384 bytes)
- TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
- TCP: Hash tables configured (established 2048 bind 2048)
- TCP: reno registered
- UDP hash table entries: 256 (order: 0, 4096 bytes)
- UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- NET: Registered protocol family 1
- jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
- fuse init (API version 7.18)
- msgmni has been set to 59
- io scheduler noop registered
- io scheduler deadline registered (default)
- io scheduler cfq registered
- brd: module loaded
- Check Flash Memory Controller v100 ... Found.
- SPI Nor(cs 0) ID: 0xc2 0x20 0x18
- Block:64KB Chip:16MB Name:"MX25L128XX"
- SPI Nor total size: 16MB
- mtd: bad character after partition (!)
- 8 cmdlinepart partitions found on MTD device hi_sfc
- 8 cmdlinepart partitions found on MTD device hi_sfc
- Creating 8 MTD partitions on "hi_sfc":
- 0x000000000000-0x000000040000 : "boot"
- 0x000000040000-0x000000050000 : "env"
- 0x000000050000-0x000000060000 : "conf"
- 0x000000060000-0x0000001f0000 : "os"
- 0x0000001f0000-0x000000330000 : "rootfs"
- 0x000000330000-0x000000fe0000 : "home"
- 0x000000fe0000-0x000000ff0000 : "vd1"
- 0x000000ff0000-0x000001000000 : "ver"
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- hiusb-ehci hiusb-ehci.0: HIUSB EHCI
- hiusb-ehci hiusb-ehci.0: new USB bus registered, assigned bus number 1
- hiusb-ehci hiusb-ehci.0: irq 15, io mem 0x100b0000
- hiusb-ehci hiusb-ehci.0: USB 0.0 started, EHCI 1.00
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- i2c /dev entries driver
- hisi_i2c hisi_i2c.0: Hisilicon [i2c-0] probed!
- hisi_i2c hisi_i2c.1: Hisilicon [i2c-1] probed!
- hisi_i2c hisi_i2c.2: Hisilicon [i2c-2] probed!
- TCP: cubic registered
- Initializing XFRM netlink socket
- NET: Registered protocol family 17
- NET: Registered protocol family 15
- lib80211: common routines for IEEE802.11 drivers
- Registering the dns_resolver key type
- ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@VFS: Mounted root (jffs2 filesystem) on device 31:4.
- Freeing init memory: 112K
- ^@VFS: Mounted root (jffs2 filesystem) on device 31:4.
- Freeing init memory: 112K
- ^@VFS: Mounted root (jffs2 filesystem) on device 31:4.
- Freeing init memory: 112K
- ^@VFS: Mounted root (jffs2 filesystem) on device 31:4.
- Freeing init memory: 112K
- ^@VFS: Mounted root (jffs2 filesystem) on device 31:4.
- Freeing init memory: 112K
- ^@VFS: Mounted root (jffs2 filesystem) on device 31:4.
- Freeing init memory: 112K
- ^@VFS: Mounted root (jffs2 filesystem) on device 31:4.
- Freeing init memory: 112K
- ^@VFS: Mounted root (jffs2 filesystem) on device 31:4.
- Freeing init memory: 112K
- ^@VFS: Mounted root (jffs2 filesystem) on device 31:4.
- Freeing init memory: 112K
- ^@VFS: Mounted root (jffs2 filesystem) on device 31:4.
- Freeing init memory: 112K
- usb 1-1: new high-speed USB device number 2 using hiusb-ehci
- mmc1: new high speed SDHC card at address 1234
- mmcblk0: mmc1:1234 SA08G 7.42 GiB
- mmcblk0: p1
- exFAT: Version 1.2.9
- himci: card disconnected!
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement