SHARE
TWEET

parity 1

a guest Dec 8th, 2019 69 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.56-Unraid] (local build)
  2. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     WDC HGST Ultrastar He10
  6. Device Model:     WDC WD80EMAZ-00WJTA0
  7. Serial Number:    7HKRZY4J
  8. LU WWN Device Id: 5 000cca 257f4bad2
  9. Firmware Version: 83.H0A83
  10. User Capacity:    8,001,563,222,016 bytes [8.00 TB]
  11. Sector Sizes:     512 bytes logical, 4096 bytes physical
  12. Rotation Rate:    5400 rpm
  13. Form Factor:      3.5 inches
  14. Device is:        In smartctl database [for details use: -P show]
  15. ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
  16. SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is:    Sun Dec  8 13:23:19 2019 CST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20. AAM feature is:   Unavailable
  21. APM level is:     164 (intermediate level without standby)
  22. Rd look-ahead is: Enabled
  23. Write cache is:   Enabled
  24. DSN feature is:   Unavailable
  25. ATA Security is:  Disabled, NOT FROZEN [SEC1]
  26. Wt Cache Reorder: Enabled
  27.  
  28. === START OF READ SMART DATA SECTION ===
  29. SMART overall-health self-assessment test result: PASSED
  30.  
  31. General SMART Values:
  32. Offline data collection status:  (0x80) Offline data collection activity
  33.                     was never started.
  34.                     Auto Offline Data Collection: Enabled.
  35. Self-test execution status:      (   0) The previous self-test routine completed
  36.                     without error or no self-test has ever
  37.                     been run.
  38. Total time to complete Offline
  39. data collection:        (   93) seconds.
  40. Offline data collection
  41. capabilities:            (0x5b) SMART execute Offline immediate.
  42.                     Auto Offline data collection on/off support.
  43.                     Suspend Offline collection upon new
  44.                     command.
  45.                     Offline surface scan supported.
  46.                     Self-test supported.
  47.                     No Conveyance Self-test supported.
  48.                     Selective Self-test supported.
  49. SMART capabilities:            (0x0003) Saves SMART data before entering
  50.                     power-saving mode.
  51.                     Supports SMART auto save timer.
  52. Error logging capability:        (0x01) Error logging supported.
  53.                     General Purpose Logging supported.
  54. Short self-test routine
  55. recommended polling time:    (   2) minutes.
  56. Extended self-test routine
  57. recommended polling time:    ( 996) minutes.
  58. SCT capabilities:          (0x003d) SCT Status supported.
  59.                     SCT Error Recovery Control supported.
  60.                     SCT Feature Control supported.
  61.                     SCT Data Table supported.
  62.  
  63. SMART Attributes Data Structure revision number: 16
  64. Vendor Specific SMART Attributes with Thresholds:
  65. ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  66.   1 Raw_Read_Error_Rate     PO-R--   100   100   016    -    0
  67.   2 Throughput_Performance  --S---   130   130   054    -    108
  68.   3 Spin_Up_Time            POS---   162   162   024    -    435 (Average 377)
  69.   4 Start_Stop_Count        -O--C-   100   100   000    -    44
  70.   5 Reallocated_Sector_Ct   PO--CK   100   100   005    -    0
  71.   7 Seek_Error_Rate         -O-R--   100   100   067    -    0
  72.   8 Seek_Time_Performance   --S---   128   128   020    -    18
  73.   9 Power_On_Hours          -O--C-   100   100   000    -    522
  74.  10 Spin_Retry_Count        -O--C-   100   100   060    -    0
  75.  12 Power_Cycle_Count       -O--CK   100   100   000    -    38
  76.  22 Helium_Level            PO---K   100   100   025    -    100
  77. 192 Power-Off_Retract_Count -O--CK   100   100   000    -    656
  78. 193 Load_Cycle_Count        -O--C-   100   100   000    -    656
  79. 194 Temperature_Celsius     -O----   180   180   000    -    36 (Min/Max 25/49)
  80. 196 Reallocated_Event_Count -O--CK   100   100   000    -    0
  81. 197 Current_Pending_Sector  -O---K   100   100   000    -    0
  82. 198 Offline_Uncorrectable   ---R--   100   100   000    -    0
  83. 199 UDMA_CRC_Error_Count    -O-R--   200   200   000    -    0
  84.                             ||||||_ K auto-keep
  85.                             |||||__ C event count
  86.                             ||||___ R error rate
  87.                             |||____ S speed/performance
  88.                             ||_____ O updated online
  89.                             |______ P prefailure warning
  90.  
  91. General Purpose Log Directory Version 1
  92. SMART           Log Directory Version 1 [multi-sector log support]
  93. Address    Access  R/W   Size  Description
  94. 0x00       GPL,SL  R/O      1  Log Directory
  95. 0x01           SL  R/O      1  Summary SMART error log
  96. 0x02           SL  R/O      1  Comprehensive SMART error log
  97. 0x03       GPL     R/O      1  Ext. Comprehensive SMART error log
  98. 0x04       GPL     R/O    256  Device Statistics log
  99. 0x04       SL      R/O    255  Device Statistics log
  100. 0x06           SL  R/O      1  SMART self-test log
  101. 0x07       GPL     R/O      1  Extended self-test log
  102. 0x08       GPL     R/O      2  Power Conditions log
  103. 0x09           SL  R/W      1  Selective self-test log
  104. 0x0c       GPL     R/O   5501  Pending Defects log
  105. 0x10       GPL     R/O      1  NCQ Command Error log
  106. 0x11       GPL     R/O      1  SATA Phy Event Counters log
  107. 0x12       GPL     R/O      1  SATA NCQ Non-Data log
  108. 0x13       GPL     R/O      1  SATA NCQ Send and Receive log
  109. 0x15       GPL     R/W      1  Rebuild Assist log
  110. 0x21       GPL     R/O      1  Write stream error log
  111. 0x22       GPL     R/O      1  Read stream error log
  112. 0x24       GPL     R/O    256  Current Device Internal Status Data log
  113. 0x25       GPL     R/O    256  Saved Device Internal Status Data log
  114. 0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
  115. 0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
  116. 0xe0       GPL,SL  R/W      1  SCT Command/Status
  117. 0xe1       GPL,SL  R/W      1  SCT Data Transfer
  118.  
  119. SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
  120. No Errors Logged
  121.  
  122. SMART Extended Self-test Log Version: 1 (1 sectors)
  123. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  124. # 1  Extended offline    Completed without error       00%       513         -
  125.  
  126. SMART Selective self-test log data structure revision number 1
  127.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  128.     1        0        0  Not_testing
  129.     2        0        0  Not_testing
  130.     3        0        0  Not_testing
  131.     4        0        0  Not_testing
  132.     5        0        0  Not_testing
  133. Selective self-test flags (0x0):
  134.   After scanning selected spans, do NOT read-scan remainder of disk.
  135. If Selective self-test is pending on power-up, resume after 0 minute delay.
  136.  
  137. SCT Status Version:                  3
  138. SCT Version (vendor specific):       256 (0x0100)
  139. Device State:                        Active (0)
  140. Current Temperature:                    36 Celsius
  141. Power Cycle Min/Max Temperature:     32/37 Celsius
  142. Lifetime    Min/Max Temperature:     25/49 Celsius
  143. Under/Over Temperature Limit Count:   0/0
  144.  
  145. SCT Temperature History Version:     2
  146. Temperature Sampling Period:         1 minute
  147. Temperature Logging Interval:        1 minute
  148. Min/Max recommended Temperature:      0/65 Celsius
  149. Min/Max Temperature Limit:           -40/70 Celsius
  150. Temperature History Size (Index):    128 (58)
  151.  
  152. Index    Estimated Time   Temperature Celsius
  153.   59    2019-12-08 11:16    35  ****************
  154.  ...    ..( 10 skipped).    ..  ****************
  155.   70    2019-12-08 11:27    35  ****************
  156.   71    2019-12-08 11:28    36  *****************
  157.  ...    ..(113 skipped).    ..  *****************
  158.   57    2019-12-08 13:22    36  *****************
  159.   58    2019-12-08 13:23    35  ****************
  160.  
  161. SCT Error Recovery Control:
  162.            Read:     70 (7.0 seconds)
  163.           Write:     70 (7.0 seconds)
  164.  
  165. Device Statistics (GP Log 0x04)
  166. Page  Offset Size        Value Flags Description
  167. 0x01  =====  =               =  ===  == General Statistics (rev 1) ==
  168. 0x01  0x008  4              38  ---  Lifetime Power-On Resets
  169. 0x01  0x010  4             522  ---  Power-on Hours
  170. 0x01  0x018  6     94888725949  ---  Logical Sectors Written
  171. 0x01  0x020  6        85675087  ---  Number of Write Commands
  172. 0x01  0x028  6    122004479011  ---  Logical Sectors Read
  173. 0x01  0x030  6       114555993  ---  Number of Read Commands
  174. 0x01  0x038  6      1882377100  ---  Date and Time TimeStamp
  175. 0x03  =====  =               =  ===  == Rotating Media Statistics (rev 1) ==
  176. 0x03  0x008  4             381  ---  Spindle Motor Power-on Hours
  177. 0x03  0x010  4             381  ---  Head Flying Hours
  178. 0x03  0x018  4             656  ---  Head Load Events
  179. 0x03  0x020  4               0  ---  Number of Reallocated Logical Sectors
  180. 0x03  0x028  4               2  ---  Read Recovery Attempts
  181. 0x03  0x030  4               0  ---  Number of Mechanical Start Failures
  182. 0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
  183. 0x04  0x008  4               0  ---  Number of Reported Uncorrectable Errors
  184. 0x04  0x010  4               0  ---  Resets Between Cmd Acceptance and Completion
  185. 0x05  =====  =               =  ===  == Temperature Statistics (rev 1) ==
  186. 0x05  0x008  1              36  ---  Current Temperature
  187. 0x05  0x010  1              35  N--  Average Short Term Temperature
  188. 0x05  0x018  1              34  N--  Average Long Term Temperature
  189. 0x05  0x020  1              49  ---  Highest Temperature
  190. 0x05  0x028  1              25  ---  Lowest Temperature
  191. 0x05  0x030  1              46  N--  Highest Average Short Term Temperature
  192. 0x05  0x038  1              25  N--  Lowest Average Short Term Temperature
  193. 0x05  0x040  1              44  N--  Highest Average Long Term Temperature
  194. 0x05  0x048  1              25  N--  Lowest Average Long Term Temperature
  195. 0x05  0x050  4               0  ---  Time in Over-Temperature
  196. 0x05  0x058  1              65  ---  Specified Maximum Operating Temperature
  197. 0x05  0x060  4               0  ---  Time in Under-Temperature
  198. 0x05  0x068  1               0  ---  Specified Minimum Operating Temperature
  199. 0x06  =====  =               =  ===  == Transport Statistics (rev 1) ==
  200. 0x06  0x008  4               4  ---  Number of Hardware Resets
  201. 0x06  0x010  4              22  ---  Number of ASR Events
  202. 0x06  0x018  4               0  ---  Number of Interface CRC Errors
  203. 0xff  =====  =               =  ===  == Vendor Specific Statistics (rev 1) ==
  204.                                 |||_ C monitored condition met
  205.                                 ||__ D supports DSN
  206.                                 |___ N normalized value
  207.  
  208. Pending Defects log (GP Log 0x0c)
  209. No Defects Logged
  210.  
  211. SATA Phy Event Counters (GP Log 0x11)
  212. ID      Size     Value  Description
  213. 0x0001  2            0  Command failed due to ICRC error
  214. 0x0002  2            0  R_ERR response for data FIS
  215. 0x0003  2            0  R_ERR response for device-to-host data FIS
  216. 0x0004  2            0  R_ERR response for host-to-device data FIS
  217. 0x0005  2            0  R_ERR response for non-data FIS
  218. 0x0006  2            0  R_ERR response for device-to-host non-data FIS
  219. 0x0007  2            0  R_ERR response for host-to-device non-data FIS
  220. 0x0008  2            0  Device-to-host non-data FIS retries
  221. 0x0009  2            3  Transition from drive PhyRdy to drive PhyNRdy
  222. 0x000a  2            4  Device-to-host register FISes sent due to a COMRESET
  223. 0x000b  2            0  CRC errors within host-to-device FIS
  224. 0x000d  2            0  Non-CRC errors within host-to-device FIS
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top