Guest User

Untitled

a guest
Mar 11th, 2024
132
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.65 KB | None | 0 0
  1. smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.7.9-arch1-1] (local build)
  2. Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model: TOSHIBA HDWG440
  6. Serial Number: 12P0A1B7FZ0G
  7. LU WWN Device Id: 5 000039 b68d1d246
  8. Firmware Version: 0601
  9. User Capacity: 4.000.787.030.016 bytes [4,00 TB]
  10. Sector Size: 512 bytes logical/physical
  11. Rotation Rate: 7200 rpm
  12. Form Factor: 3.5 inches
  13. Device is: Not in smartctl database 7.3/5528
  14. ATA Version is: ACS-3 T13/2161-D revision 5
  15. SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
  16. Local Time is: Mon Mar 11 16:04:53 2024 CET
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x82) Offline data collection activity
  25. was completed without error.
  26. Auto Offline Data Collection: Enabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: ( 120) seconds.
  32. Offline data collection
  33. capabilities: (0x5b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. No Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 2) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 409) minutes.
  50. SCT capabilities: (0x003d) SCT Status supported.
  51. SCT Error Recovery Control supported.
  52. SCT Feature Control supported.
  53. SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 16
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  58. 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  59. 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  60. 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 8420
  61. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 846
  62. 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
  63. 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  64. 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  65. 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 7086
  66. 10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0
  67. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 796
  68. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1
  69. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 61
  70. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 2468
  71. 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 25 (Min/Max 11/45)
  72. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  73. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
  74. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  75. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 39
  76. 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 524289
  77. 222 Loaded_Hours 0x0032 089 089 000 Old_age Always - 4729
  78. 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  79. 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
  80. 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 515
  81. 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
  82.  
  83. SMART Error Log Version: 1
  84. ATA Error Count: 39 (device log contains only the most recent five errors)
  85. CR = Command Register [HEX]
  86. FR = Features Register [HEX]
  87. SC = Sector Count Register [HEX]
  88. SN = Sector Number Register [HEX]
  89. CL = Cylinder Low Register [HEX]
  90. CH = Cylinder High Register [HEX]
  91. DH = Device/Head Register [HEX]
  92. DC = Device Command Register [HEX]
  93. ER = Error register [HEX]
  94. ST = Status register [HEX]
  95. Powered_Up_Time is measured from power on, and printed as
  96. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  97. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  98.  
  99. Error 39 occurred at disk power-on lifetime: 7086 hours (295 days + 6 hours)
  100. When the command that caused the error occurred, the device was active or idle.
  101.  
  102. After command completion occurred, registers were:
  103. ER ST SC SN CL CH DH
  104. -- -- -- -- -- -- --
  105. 84 41 10 6f 44 5d 40 Error: ICRC, ABRT at LBA = 0x005d446f = 6112367
  106.  
  107. Commands leading to the command that caused the error were:
  108. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  109. -- -- -- -- -- -- -- -- ---------------- --------------------
  110. 60 00 10 70 43 5d 40 00 00:02:04.302 READ FPDMA QUEUED
  111. ef 02 00 00 00 00 a0 00 00:02:03.350 SET FEATURES [Enable write cache]
  112. aa aa aa aa aa aa aa ff 00:02:03.344 [RESERVED]
  113. 60 00 08 70 43 5d 40 00 00:02:03.251 READ FPDMA QUEUED
  114. ef 02 00 00 00 00 a0 00 00:02:02.330 SET FEATURES [Enable write cache]
  115.  
  116. Error 38 occurred at disk power-on lifetime: 7086 hours (295 days + 6 hours)
  117. When the command that caused the error occurred, the device was active or idle.
  118.  
  119. After command completion occurred, registers were:
  120. ER ST SC SN CL CH DH
  121. -- -- -- -- -- -- --
  122. 84 41 08 6f 44 5d 40 Error: ICRC, ABRT at LBA = 0x005d446f = 6112367
  123.  
  124. Commands leading to the command that caused the error were:
  125. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  126. -- -- -- -- -- -- -- -- ---------------- --------------------
  127. 60 00 08 70 43 5d 40 00 00:02:03.251 READ FPDMA QUEUED
  128. ef 02 00 00 00 00 a0 00 00:02:02.330 SET FEATURES [Enable write cache]
  129. aa aa aa aa aa aa aa ff 00:02:02.311 [RESERVED]
  130. 60 00 f8 70 43 5d 40 00 00:02:02.253 READ FPDMA QUEUED
  131. 60 00 f0 70 42 5d 40 00 00:02:02.253 READ FPDMA QUEUED
  132.  
  133. Error 37 occurred at disk power-on lifetime: 7086 hours (295 days + 6 hours)
  134. When the command that caused the error occurred, the device was active or idle.
  135.  
  136. After command completion occurred, registers were:
  137. ER ST SC SN CL CH DH
  138. -- -- -- -- -- -- --
  139. 84 41 f8 6f 44 5d 40 Error: ICRC, ABRT at LBA = 0x005d446f = 6112367
  140.  
  141. Commands leading to the command that caused the error were:
  142. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  143. -- -- -- -- -- -- -- -- ---------------- --------------------
  144. 60 00 f8 70 43 5d 40 00 00:02:02.253 READ FPDMA QUEUED
  145. 60 00 f0 70 42 5d 40 00 00:02:02.253 READ FPDMA QUEUED
  146. 60 00 e8 70 41 5d 40 00 00:02:02.253 READ FPDMA QUEUED
  147. 60 00 e0 70 40 5d 40 00 00:02:02.253 READ FPDMA QUEUED
  148. 60 00 d8 70 3f 5d 40 00 00:02:02.253 READ FPDMA QUEUED
  149.  
  150. Error 36 occurred at disk power-on lifetime: 7086 hours (295 days + 6 hours)
  151. When the command that caused the error occurred, the device was active or idle.
  152.  
  153. After command completion occurred, registers were:
  154. ER ST SC SN CL CH DH
  155. -- -- -- -- -- -- --
  156. 84 41 40 6f 34 5d 40 Error: ICRC, ABRT at LBA = 0x005d346f = 6108271
  157.  
  158. Commands leading to the command that caused the error were:
  159. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  160. -- -- -- -- -- -- -- -- ---------------- --------------------
  161. 60 00 40 70 33 5d 40 00 00:02:01.235 READ FPDMA QUEUED
  162. 60 00 38 70 2c 5d 40 00 00:02:01.224 READ FPDMA QUEUED
  163. ef 02 00 00 00 00 a0 00 00:02:00.746 SET FEATURES [Enable write cache]
  164. aa aa aa aa aa aa aa ff 00:02:00.716 [RESERVED]
  165. 2f 00 01 10 00 00 e0 00 00:01:31.953 READ LOG EXT
  166.  
  167. Error 35 occurred at disk power-on lifetime: 7086 hours (295 days + 6 hours)
  168. When the command that caused the error occurred, the device was active or idle.
  169.  
  170. After command completion occurred, registers were:
  171. ER ST SC SN CL CH DH
  172. -- -- -- -- -- -- --
  173. 84 41 f0 6f 2d 5d 40 Error: ICRC, ABRT at LBA = 0x005d2d6f = 6106479
  174.  
  175. Commands leading to the command that caused the error were:
  176. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  177. -- -- -- -- -- -- -- -- ---------------- --------------------
  178. 60 00 30 70 33 5d 40 00 00:01:31.952 READ FPDMA QUEUED
  179. 60 00 28 70 32 5d 40 00 00:01:31.952 READ FPDMA QUEUED
  180. 60 00 20 70 31 5d 40 00 00:01:31.952 READ FPDMA QUEUED
  181. 60 00 18 70 30 5d 40 00 00:01:31.952 READ FPDMA QUEUED
  182. 60 00 10 70 2f 5d 40 00 00:01:31.952 READ FPDMA QUEUED
  183.  
  184. SMART Self-test log structure revision number 1
  185. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  186.  
  187. SMART Selective self-test log data structure revision number 1
  188. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  189. 1 0 0 Not_testing
  190. 2 0 0 Not_testing
  191. 3 0 0 Not_testing
  192. 4 0 0 Not_testing
  193. 5 0 0 Not_testing
  194. Selective self-test flags (0x0):
  195. After scanning selected spans, do NOT read-scan remainder of disk.
  196. If Selective self-test is pending on power-up, resume after 0 minute delay.
  197.  
  198. The above only provides legacy SMART information - try 'smartctl -x' for more
  199.  
Advertisement
Add Comment
Please, Sign In to add comment